FIRE-RAted DOWNLIGHTS ® FGLED6 LED Downlight Page 29 FGLED3 Square Page FGLED6 Tilt Page 31 FGLED Anti-Glare 36 Page FGLED6 Square Page 32 FGLED Anti-Glare Square 37 Page Page 33 FGLED Accessory Convertor Plate 37 Page Page 40 Twist & Lock Mains 38 Page 41 Showerlights Page Page Large Bezel Mains 42 Page PIR Occupancy Detector pir Page 43 Page FGLED Accessory Concealer Ring HALOGEN Twist & Lock Low Voltage FGLED3 LED Downlight FGLED6 Emergency 43 39 35 Introducing jcc.co.uk ® Fire-rated Downlights The successor to FGLED7® Same light, less energy ® ® Cool white 500 lumens / Warm white 450 lumens Cool white 500 lumens / Warm white 450 lumens 5 3 1 7 4 2 10 9 1 Unique crystal clear lens Provides smooth, even light distribution 2 Same light, less energy Still 500 lumens, but 78 lumens per circuit Watt, and 24% further energy saving 3 Tried and tested intumescent seals FGLED's dual patented seals provide improved ventilation and increased the life of the light source 8 6 Accepts stranded & solid cable Wider push fit terminal connections, for solid and stranded cable, enables quick and easy installation 7 Wider terminal access Easier to loop in and loop out cables 8 Adjustable clips FGLED® high strength steel clips designed to accommodate different ceiling thicknesses 4 FGLED's trusted enclosed ‘can’ design 9 High performance heat sink 5 Redesigned integral driver 10 Die-cast metal bezel Protects the heat sink from the build up of flammable dust, in line with the Electrical Safety Council’s recommendations Rounded edges provide improved ceiling entry and smaller diameter clears the edges of the cutout Specially designed heat sink that transfers the heat away from the LEDs and extends the operating life of the fitting FGLED7® compatible, high quality fixed metal bezel. Saves valuable time during installation FGLED6® dimmable not compatible with FGLED7® dimmable. For compatible FGLED7® driver, ask for original FGLED7® product code. 24 6 25% faster installation +44 (0)1243 838999 Fire-rated Downlights Redesigned driver housing improves entry into ceiling cut out Smaller diameter clears edges of cut out Rounded housing edges Driver housing sits within the diameter of the enclosed can for greater clearance of ceiling cut out Faster wiring connection Push fit termination Greater access for wiring Accepts solid and stranded cable Bigger terminal buttons and larger wire entry points Wider terminal access Bigger terminal buttons Larger wire entry points Accepts both solid and stranded cables Wider access Suitable for shallow ceiling voids FGLED6® has an 11mm height reduction FGLED7® FGLED6® 101mm 112mm 25 Enclosed can provides complete fire safety JCC’s tried and tested enclosed can design stops flames from entering the ceiling void, forming a complete barrier in the event of a fire. In addition, the steel ‘can’ protects the heat sink from flammable dust, ensuring maximum fire safety. Patented intumescent seals 1 FGLED® fire-rated downlights use intumescent material* (which expands in the event of fire) to seal the gap that the downlight creates in the plasterboard ceiling. 1 FGLED® products provide protection around the air vent on top of the fire proof can 2 2 Dual protection is provided from a further seal around the bezel *Patent no. EP168863B1 & GB2422191B Fire tested for 30, 60 & 90 minute ceilings FGLED® products are fully integrated and are rigorously fire tested to provide fire safety that you can trust. 30 min 60 min 90 min • 600mm joist centres • Single layer 1 2.5mm plasterboard • 600mm joist centres • Double layer 15.0mm plasterboard • 450mm joist centres • Double layer 15.0mm plasterboard Complies with Part L, B, C & E of the 2014 building regulations 26 Fire-rated Downlights +44 (0)1243 838999 Unique 'driver on can' design • Improves air flow and ensures reliability • Allows insulation to be laid directly over the back of the fitting FGLED’s unique design allows for the driver 1 to be securely fixed on top of the steel ‘can’ 2 that surrounds the heat sink. The driver is positioned to give clear space between the vent above the heat sink and the base of the driver. Heat is dissipated efficiently whilst shielding the opening from dust. The 'driver on can' ensures that when the fitting is placed into ceilings that contain insulation, a clear space is created around the fitting*. This controlled environment allows air to flow freely, maintaining the correct operating temperature. FGLED® fittings FGLED’s larger airpocket guarantees that the temperature of the driver remains at the correct operating level. 1 2 Competitor with separate driver Fire-rated downlights with separate drivers do not create adequate space for airflow and risk reliability issues due to over heating. Insulation Driver over heats Space around fitting Saves installation time There is no need to cut holes in mineral wool insulation and no firehoods or firecages are required, saving costs and installation time. No need for separate bezel No need for insulation accessories *Ceiling insulation can be laid over the top of the fitting but it is important that it is not packed around. 27 Introducing ® The successor to FGLED7® The market leading halogen replacement •88% energy saving against halogen •Patented design that ensures reliability •Crystal clear engineered lenses •Ideal for shallow ceiling voids Crystal clear engineered lenses FGLED6® contains a unique array of 6 high specification LEDs that are focussed through a specially designed composite lens to maximise light transmission and create crystal clear sparkling light. The light is projected through 6 individual lenses that combine to create a focussed beam which links together and improves light distribution. 6 LED configuration Competitor product 38° beam angle Uniform light distribution Uneven light distribution Outstanding cost saving Traditional GU10 halogen (50W) FGLED6 ® (6W) No. of fittings 50 50 Overall energy usage 2500 320 Energy cost per hour £0.30 £0.04 Annual energy usage £547.50 £70.08 Total annual saving £477.42 (£9.55 per fitting) Assumed domestic usage of 5 hours per day, 365 days per year at a cost of 12p per kW/h / FGLED6 28 Fire-rated Downlights +44 (0)1243 838999 C0 / 180 cd / 1000 lm C90 / 270 Ceiling level 90o o 90 100 200 o o 60 60 300 30o 0o o 30 FULL PHOTOMETRIC.LDT FILES AVAILABLE ONLINE The market leading fire-rated LED downlight • • • • • • • Direct 50W GU10 halogen replacement • Zero maintenance, no need to re-lamp • 75,000 hour life •38° beam angle • Cool and warm white options • Dimmable option available • Ideal for accent lighting within commercial environments Fully compliant with building regulations Emergency version (see page 33) Anti-glare and square bezel options available (see pages 32 & 37) High quality, die-cast aluminium bezel IP65, ideal for use in bathrooms and kitchens 10 year extended warranty* JC94472CH JC94473BN JC94474WH Code Description JC94472 FGLED6 mains dimmable** JC94473 FGLED6 mains dimmable** JC94474 FGLED6 mains non-dimmable JC94475 FGLED6 mains non-dimmable Colour Temp Warm white Cool white Warm white Cool white Watt 6W 6W 6W 6W Lumens 450 500 450 500 *10 year for domestic dwellings, 5 year for commercial properties. Requires online registration. **FGLED6® dimmable not compatibleJC94172 with FGLED7® dimmable. For compatible FGLED7® driver, ask for original FGLED7® product code. CLASS LED Cool white 4000K/CRI: Ra (80) Warm white 3000K/CRI: Ra (80) 106 IP65 240V Zone 1 112 FINISH CONSTRUCTION Brushed nickel, chrome, white Body – Pressed steel Bezel – Die-cast aluminium Maximum void working temperature 30°C 6.5 113 101 ø92 ø 71-73mm - 12.5mm thick, 30 minute ceiling types 6.5 92 ø 76-80mm - 30mm thick, 60-90 minute ceiling types 29 FGLED6 TILT ® The performance of FGLED6® with unique tilt & rotate •Ideal for sloped ceilings or directing light •20º tiltable and 360º rotatable lens •Quality metal construction •10 year extended warranty* Versatile application 1 2 Ideal for use in sloped ceilings to provide vertical downlight Can be applied to horizontal ceilings and angled to direct light to create a wall wash Enclosed can, essential for fire rating Tilting the lens in a standard LED fitting can create a gap that, in the event of a fire, will allow flames to penetrate into the ceiling void. However, the unique tiltable version of FGLED6® has a patented design that incorporates an enclosed steel can and intumescent seal. FGLED6® Tilt has been independently fire tested for 30, 60 and 90 minutes Competitors no can JCC FGLED6 ® enclosed can Flammable dust & debris Intumescent Material Gap Gap / FGLED6Tilt 30 Can Fire-rated Downlights +44 (0)1243 838999 C0 / 180 cd / 1000 lm C90 / 270 Ceiling level 90o o 90 100 200 o o 60 60 300 30o 0o o 30 FULL PHOTOMETRIC.LDT FILES AVAILABLE ONLINE The performance of FGLED6® with unique tilt & rotate • • • • • • Fully fire-rated 20º tiltable downlight Direct 50W GU10 halogen replacement 88% energy saving Zero maintenance, no need to re-lamp 75,000 hour life Dimmable as standard • • • • • 38° beam angle Cool and warm white options Fully compliant with building regulations High quality, die-cast aluminium bezel 10 year extended warranty* JC94481CH JC94481BN Code JC94481 JC94482 Description FGLED6 Tilt dimmable** FGLED6 Tilt dimmable** JC94481WH Colour Temp Warm white Cool white Watt 6W 6W Lumens 450 500 *10 year for domestic dwellings, 5 year for commercial properties. Requires online registration. **FGLED6® dimmable not compatibleJC94172 with FGLED7® dimmable. For compatible FGLED7® driver, ask for original FGLED7® product code. CLASS LED Cool white 4000K/CRI: Ra (80) Warm white 3000K/CRI: Ra (80) 106 IP20 240V 112 FINISH CONSTRUCTION Brushed nickel, chrome, white Body – Pressed steel Bezel – Die-cast aluminium Maximum void working temperature 30°C 6.5 113 ø92 120.5 ø 81-83mm - 12.5mm thick, 30 minute ceiling types 100 ø 81-83mm - 30mm thick, 60-90 minute ceiling types 31 jcc.co.uk Fire-rated Downlights • • • • • • Square bezel version of the FGLED6® range Available in cool and warm white Dimmable options Die-cast aluminium bezel Fully tested fire-rated downlight IP65 for use in bathrooms • 75,000 hour life • Fully compliant with building regulations •38° beam angle • Emergency versions available • 10 year extended warranty* JC94572BN JC94572CH Code JC94572 JC94573 JC94574 JC94575 JC94576 JC94577 JC94578 JC94579 Description FGLED6 Square dimmable** FGLED6 Square dimmable** FGLED6 Square non-dimmable FGLED6 Square non-dimmable FGLED6 Square dimmable emergency** FGLED6 Square dimmable emergency** FGLED6 Square non-dimmable emergency FGLED6 Square non-dimmable emergency JC94572WH Colour Temp Warm white Cool white Warm white Cool white Warm white Cool white Warm white Cool white Watt 6W 6W 6W 6W 6W 6W 6W 6W Lumens 450 500 450 500 450 500 450 500 *10 year for domestic dwellings, 5 year for commercial properties. Requires online registration. JC94172 **FGLED6® dimmable not compatible with FGLED7® dimmable. For compatible FGLED7® driver, ask for original FGLED7® product code. CLASS LED Cool white 4000K/CRI: Ra (80) Warm white 3000K/CRI: Ra (80) 106 IP65 240V Zone 1 112 6.5 113 100.4 ø 71-73mm - 12.5mm thick, 30 minute ceiling types 5.9 92 32 ø92 ø 76-80mm - 30mm thick, 60-90 minute ceiling types FINISH CONSTRUCTION Brushed nickel, chrome, white Body – Pressed steel Bezel – Die-cast aluminium Maximum void working temp 30°C Fire-rated Downlights +44 (0)1243 838999 • • • • • • Emergency version of the FGLED6® range Remote emergency unit Comes as a complete pre-wired kit 3 hour maintained emergency back-up Direct 50W GU10 halogen replacement 88% energy saving • • • • Zero maintenance, no need to re-lamp 75,000 hour life Fully tested fire-rated downlight Ideal for accent lighting within commercial environments • 10 year extended warranty* JC94476BN JC94476CH JC94476WH Code Description JC94476 FGLED6 dimmable emergency** JC94477FGLED6 dimmable emergency** JC94478 FGLED6 non-dimmable emergency JC94479 FGLED6 non-dimmable emergency Colour Temp Warm white Cool white Warm white Cool white Watt 6W 6W 6W 6W Lumens 450 500 450 500 *10 year for domestic dwellings, 5 year for commercial properties. Requires online registration. **FGLED6® dimmable not compatibleJC94172 with FGLED7® dimmable. For compatible FGLED7® driver, ask for original FGLED7® product code. CLASS LED Cool white 4000K/CRI: Ra (80) Warm white 3000K/CRI: Ra (80) 106 IP65 240V Zone 1 112 FINISH CONSTRUCTION Brushed nickel, chrome, white Body – Pressed steel Bezel – Die-cast aluminium Maximum void working temp 30°C 6.5 113 101 ø92 ø 71-73mm - 12.5mm thick, 30 minute ceiling types 6.5 92 ø 76-80mm - 30mm thick, 60-90 minute ceiling types 33 FGLED3 jcc.co.uk ® Fire-rated Downlights The cost effective reliable LED downlight •Outperforms halogen & CFL** •Quality metal construction •Outstanding efficiency 67 lumens per circuit Watt •10 year extended warranty* Why risk a lamp & can? Integrated fittings guarantee quality compromise safety & reliability Fire protection you can trust No guarantee of fire safety Guarantee performance Not designed to operate with a can Unique design ensures airflow Heat build up reduces LED life 10 year extended warranty† May void warranty / FGLED3 34 Replacement LED lamps Fire-rated Downlights +44 (0)1243 838999 C0 / 180 cd / 1000 lm C90 / 270 Ceiling level 90o o 90 100 200 o o 60 60 300 30o 0o o 30 FULL PHOTOMETRIC.LDT FILES AVAILABLE ONLINE The cost effective reliable LED downlight • Compatible with FGLED6® non-dimmable • Designed for modern ceiling heights • Ideal for even shallower ceiling voids • Over 80% energy saving against halogen • Outperforms halogen and CFL** •Ultra low 3W energy usage • Outstanding efficiency 67 lpcW • • • • • • Unique design that’s built to last High quality, die-cast aluminium bezel Crystal clear engineered lenses Crisp, clear light from high quality lens IP65, ideal for use in bathrooms and kitchens 10 year extended warranty* JC94198CH JC94199BN JC94199WH Code Description JC94198 FGLED3 non-dimmable JC94199 FGLED3 non-dimmable Colour Temp Warm white Cool white Watt 3W 3W Lumens 250 300 *10 year for domestic dwellings, 5 year for commercial properties. Requires online registration. **11W GU10 CFL & 35W halogen GU10 JC94172 CLASS LED Cool white 4000K/CRI: Ra (80) Warm white 3000K/CRI: Ra (80) 6.5 106 IP65 Zone 1 240V 112 94 FINISH CONSTRUCTION Brushed nickel, chrome, white Body – Pressed steel Bezel – Die-cast aluminium Maximum void working temperature 30°C ø92 ø 71-73mm - 12.5mm thick, 30 minute ceiling types 92 ø 76-80mm - 30mm thick, 60-90 minute ceiling types 35 jcc.co.uk Fire-rated Downlights The cost effective reliable LED downlight • Square bezel version of the FGLED3® range • Compatible with FGLED6® non-dimmable • Designed for modern ceiling heights • Ideal for even shallower ceiling voids • Over 80% energy saving against halogen • Outperforms halogen and CFL •Ultra low 3W energy usage • • • • • • • Outstanding efficiency 67 lpcW Unique design that’s built to last High quality, die-cast aluminium bezel Crystal clear engineered lenses Crisp, clear light from high quality lens IP65, ideal for use in bathrooms and kitchens 10 year extended warranty* JC94398CH JC94398BN Code JC94398 JC94399 JC94398WH Description FGLED3 Square non-dimmable FGLED3 Square non-dimmable Colour Temp Warm white Cool white Watt 3W 3W Lumens 250 300 *10 year for domestic dwellings, 5 yearJC94172 for commercial properties. Requires online registration. CLASS LED Cool white 4000K/CRI: Ra (80) Warm white 3000K/CRI: Ra (80) 106 IP65 240V Zone 1 112 6.5 122 94 ø 71-73mm - 12.5mm thick, 30 minute ceiling types 92 36 ø92 ø 76-80mm - 30mm thick, 60-90 minute ceiling types FINISH CONSTRUCTION Brushed nickel, chrome, white Body – Pressed steel Bezel – Die-cast aluminium Maximum void working temp 30°C Fire-rated Downlights +44 (0)1243 838999 The quality of FGLED® with discreet light source • • • • Anti-glare version of FGLED® range Recessed LED light source Black baffle to reduce glare 75,000 hours life • • • • IP65, suitable for bathrooms Dimmable as standard** 25º beam angle 10 year extended warranty* JC94507BN JC94515CH Code Description JC94507 FGLED Anti-glare round dimmable JC94511 FGLED Anti-glare round dimmable emergency JC94515 FGLED Anti-glare Square dimmable JC94519 FGLED Anti-glare Square dimmable emergency Colour Temp Warm white Warm white Warm white Warm white Watt 6W 6W 6W 6W Lumens 272 272 272 272 *10 year for domestic dwellings, 5 year for commercial properties. Requires online registration. **FGLED6® dimmable not compatible with FGLED7® dimmable. For compatible FGLED7® driver, ask for original FGLED7® product code. CLASS IP65 240V Zone 1 JC94507/11 LED FINISH CONSTRUCTION Warm white 3000K/CRI: Ra (80) Brushed nickel, chrome, white Body – Pressed steel Bezel – Die-cast aluminium Maximum void working temp 30°C JC94515/19 112.8 112.8 127.7 127.7 92 ø 71-73mm - 12.5mm thick, 30 minute ceiling types 92 ø 80mm - 30mm thick, 60-90 minute ceiling types 37 jcc.co.uk Fire-rated Downlights CONVERTOR PLATE • Allows for the retrofit of FGLED6® or FGLED3®, where larger downlights were previously installed • Part B compliant (fire-rated) • Suitable for use in all ceiling types • For cut outs 80-135mm in diameter • Chrome, white and brushed nickel finishes to match bezels JC94180BN JC94180CH JC94180WH CodeDescription JC94180 JC94184 FGLED6 & FGLED3 convertor plate FGLED6 Tilt convertor plate Fitting not included FINISH CONSTRUCTION IP65 Brushed nickel, chrome, white Body – Cast aluminium Chassis – Mild Steel ø78 ø170 38 6.5 0.5 CLASS Fire-rated Downlights +44 (0)1243 838999 CONcealer ring • A subtle retrofit option for FGLED6® & FGLED3® • Use where the ceiling cut out may have suffered cosmetic damage • Ideal for use in suspended ceilings • For use with ceiling cut outs 80-110mm in diameter • White finish to match ceilings JC94183 CodeDescription JC94183 FGLED6 & FGLED3 concealer ring (5 per pack) JC94185 FGLED6 Tilt concealer ring white (5 per pack) Fitting not included CLASS FINISH CONSTRUCTION IP20 White Body – Pressed steel JC94183 JC94185 115 ø115 ø76.6 8 8 Cut-Out ø78mm Cut-Out ø86mm 39 jcc.co.uk Fire-rated Downlights TWIST & LOCK LOW VOLTAGE • Fire-rated low voltage downlights maintaining the fire-rating of ceilings • Twist & lock lamp retainer for easy lamp removal JC94211WH JC94212CH Code JC94211 JC94212 JC94217 Description Fire-rated twist & lock Fire-rated 15° tiltable twist & lock As JC94211 with ‘plug & play’ transformer CLASS IP20 *240V 12V LAMP Included FINISH CONSTRUCTION MR16 50W GU5.3 (ALU) Brass, brushed nickel, chrome, white (JC94217 not available in brass) Body – Pressed steel Always use forward heat lamps JC94211 JC94212 ø64 111 40 103 ø85 JC94217 ø64 ø74 89 4 Lamp MR16 50W (ALU) MR16 50W (ALU) MR16 50W (ALU)* Cut-Out ø74mm 110 80 4 ø96 Cut-Out ø85mm Transformer required see page 214 89 4 ø85 109 Cut-Out ø74mm Fire-rated Downlights +44 (0)1243 838999 TWIST & LOCK MAINS • Fire-rated 240V halogen downlights maintaining the fire-rating of ceilings • Twist & lock lamp retainer for easy lamp removal • Extra large terminal allow for ‘loop-in/ loop-out’ wiring • Transformer not required JC94213WH JC94214CH CodeDescription JC94213 Fire-rated twist & lock JC94214 Fire-rated 15° tiltable twist & lock CLASS IP20 (earth provision) 240V Lamp QPAR16 50W QPAR16 50W LAMP Included FINISH CONSTRUCTION QPAR16 50W GU10 Brass, brushed nickel, chrome, white Body – Pressed steel JC94213 JC94214 ø64 115 ø74 120 89 4 ø85 Cut-Out ø74mm 90 4 ø96 Cut-Out ø85mm 41 jcc.co.uk Fire-rated Downlights SHOWERLIGHTS • Fully fire-rated downlight • IP65 suitable for use in bathrooms JC94203CH JC94210BN Description Fire-rated low voltage enclosed IP65 downlight* Fire-rated IP65 downlight with ‘plug & play’ transformer Fire-rated enclosed IP65 downlight** 12V LAMP Included FINISH CONSTRUCTION MR16 50W GU5.3 (ALU) QPAR16 50W GU10 Brushed nickel, brass, chrome, white Body – Pressed steel Glass – Borasilicate front lens JC94203 JC94205 Ø64 42 109 ø64 Cut-Out ø74mm 88 5 Cut-Out ø74mm 88 5 112 ø64 ø88 JC94210 Ø88 109 114 IP65 **240V Zone 1 **Class II with earth provision *Requires transformer Always use forward heat lamps Cut-Out ø74mm 88 CLASS Lamp MR16 50W (ALU) MR16 50W (ALU) QPAR16 50W 5 Code JC94203 JC94205 JC94210 ø88 Fire-rated Downlights +44 (0)1243 838999 LARGE BEZEL MAINS • Fire-rated downlight with a wide bezel • Suitable for the ceiling aperture left by most large tungsten downlights ø63 • Suitable for cut outs from 89-125mm ø80.5 JC94238WH 115 87 10 Cut-Out ø89-125mm ø141 CodeDescription Lamp JC94238 Fire-rated large bezel QPAR16 50W CLASS IP20 240V LAMP Included FINISH CONSTRUCTION QPAR16 50W GU10 Brushed nickel, chrome, white Body – Pressed steel PIR OCCUPANCY DETECTOR • A fire-rated occupancy detector for all domestic lighting control • Ensures PIR is safely installed in a standard fire-rated ceiling • Easy to set, retractable PIR body • Pre-wired for easy installation To set PIR release module from fire-rated can. Adjust settings accordingly. 2m 3-Core Cable ø72 80 4 ø96 Cut-Out ø84mm JC94256 CodeDescription JC94256 Fire-rated mains voltage PIR occupancy detector CLASS IP20 240V FINISH CONSTRUCTION White Body – Pressed steel 43