SKY67014-396LF: 1.5 to 3.0 GHz Low-Noise, Low

DATA SHEET
SKY67014-396LF: 1.5 to 3.0 GHz Low-Noise, Low-Current
Amplifier
Applications
 ISM band Bluetooth® and WLAN receiver systems
 General purpose LNAs
VBIAS
Active
Bias
RF_OUT/VDD
RF_IN
Features
 Low Evaluation Board NF: 0.85 dB @ 2.45 GHz
 Gain: 13 dB @ 2.45 GHz
 Adjustable supply current for higher IIP3
 Incorporates on-die stability structures
Stability
Network
S2395
 Miniature DFN (8-pin, 2 x 2 mm) package (MSL1 @ 260 C per
JEDEC J-STD-020)
Figure 1. SKY67014-396LF Block Diagram
Description
Skyworks Green™ products are compliant with
all applicable legislation and are halogen-free.
For additional information, refer to Skyworks
Definition of Green™, document number
SQ04-0074.
VBIAS
1
8
N/C
RF_IN
2
7
RF_OUT/VDD
N/C
3
6
N/C
N/C
4
5
N/C
The SKY67014-396LF is a GaAs, pHEMT low-noise amplifier
(LNA) with an integrated active bias. The advanced GaAs pHEMT
enhancement mode process provides excellent return loss, low
noise, and high linearity.
The device offers the ability to externally adjust the supply
current. The supply voltage is applied to the RF-OUT/VDD pin
through an RF choke inductor. The VBIAS pin should be connected
to the RF_OUT/VDD pin through an external resistor to control the
supply current. Both RF_OUT/VDD and RF_IN pins should be DC
blocked to ensure proper operation.
The SKY67014-396LF is manufactured in a compact, 2 x 2 mm,
8-pin Dual Flat No-Lead (DFN) package. A functional block
diagram is shown in Figure 1. The pin configuration and package
are shown in Figure 2. Signal pin assignments and functional pin
descriptions are provided in Table 1.
S2396
Figure 2. SKY67014-396LF Pinout – 8-Pin DFN
(Top View)
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
201515D • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • October 22, 2014
1
DATA SHEET • SKY67014-396LF: HIGH LINEARITY, ACTIVE BIAS LNA
Table 1. SKY67014-396LF Signal Descriptions
Pin
Name
Description
Pin
Name
Description
1
VBIAS
Bias for first stage amplifier. External
resistor sets current consumption.
5
N/C
No connection. May be connected to ground
with no change in performance.
2
RF_IN
RF input. DC blocking capacitor required.
6
N/C
No connection. May be connected to ground
with no change in performance.
3
N/C
No connection. May be connected to ground
with no change in performance.
7
RF_OUT/VDD
RF output. Apply VDD through RF choke
inductor. DC blocking capacitor required.
4
N/C
No connection. May be connected to ground
with no change in performance.
8
N/C
No connection. May be connected to ground
with no change in performance.
Table 2. SKY67014-396LF Absolute Maximum Ratings (Note 1)
Maximum
Units
Supply voltage
Parameter
VDD
Symbol
5.5
V
Drain current
IDD
40
mA
RF input power
PIN
+18
dBm
Storage temperature
TSTG
–65
+25
+125
C
Operating temperature
TA
–40
+25
+85
C
Thermal resistance
ΘJC
Electrostatic discharge:
ESD
Charged Device Model (CDM), Class 4
Human Body Model (HBM), Class 1A
Machine Model (MM), Class A
Minimum
Typical
C/W
128
>1000
>300
>30
V
V
V
Note 1: Exposure to maximum rating conditions for extended periods may reduce device reliability. There is no damage to device with only one parameter set at the limit and all other
parameters set at or below their nominal value. Exceeding any of the limits listed here may result in permanent damage to the device.
CAUTION: Although this device is designed to be as robust as possible, electrostatic discharge (ESD) can damage this device. This device
must be protected at all times from ESD. Static charges may easily produce potentials of several kilovolts on the human body
or equipment, which can discharge without detection. Industry-standard ESD precautions should be used at all times.
Electrical and Mechanical Specifications
The absolute maximum ratings of the SKY67014-396LF are
provided in Table 2. Electrical specifications are provided in
Tables 3 and 4.
Typical performance characteristics of the SKY67014-396LF are
illustrated in Figures 3 through 15 (18 mA operation) and in
Figures 16 through 26 (5 mA operation).
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
2
October 22, 2014 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 201515D
DATA SHEET • SKY67014-396LF: HIGH LINEARITY, ACTIVE BIAS LNA
Table 3. SKY67014-396LF Electrical Specifications (Note 1)
(VDD = 3.3 V, Quiescent Current = 18 mA, TA = +25 C, PIN = –20 dBm, Characteristic Impedance [ZO] = 50 Ω, Tuning Optimized for
2.45 GHz, Unless Otherwise Noted)
Parameter
Symbol
Test Condition
Min
Typical
Max
Units
0.85
1.05
dB
RF Specifications
Noise figure
NF
Evaluation Board losses
included
Small signal gain
|S21|
12
13
dB
Input return loss
|S11|
12
15
dB
Output return loss
|S22|
8
11
dB
Reverse isolation
|S12|
20
23
dB
3rd Order Input Intercept Point
IIP3
Δf = 1 MHz,
PIN = –20 dBm/tone
+12
+15
dBm
3rd Order Output Intercept Point
OIP3
Δf = 1 MHz,
PIN = –20 dBm/tone
+25
+28
dBm
1 dB Input Compression Point
IP1dB
+1.5
+3.5
dBm
1 dB Output Compression Point
OP1dB
+13.5
+15.5
dBm
3.0
3.3
DC Specifications
Supply voltage
VDD
Supply current
IDD
Set with external resistor
5.5
18
V
mA
Note 1: Performance is guaranteed only under the conditions listed in this table.
Table 4. SKY67014-396LF Electrical Specifications (Note 1)
(VDD = 3.3 V, Quiescent Current = 5 mA, TA = +25 C, PIN = –20 dBm, Characteristic Impedance [ZO] = 50 Ω, Tuning Optimized for
2.45 GHz, Unless Otherwise Noted)
Parameter
Symbol
Test Condition
Min
Typical
Max
Units
1.05
1.35
dB
RF Specifications
Noise Figure
NF
Evaluation Board losses
included
Small signal gain
|S21|
10
12
dB
Input return loss
|S11|
11
17
dB
Output return loss
|S22|
8
13
dB
Reverse isolation
|S12|
19
22
dB
3 Order Input Intercept Point
IIP3
Δf = 1 MHz,
PIN = –20 dBm/tone
+2
+6
dBm
3rd Order Output Intercept Point
OIP3
Δf = 1 MHz,
PIN = –20 dBm/tone
+14
+18
dBm
1 dB Input Compression Point
IP1dB
+3
+5
dBm
1 dB Output Compression Point
OP1dB
+14
+16
dBm
3.3
V
rd
DC Specifications
Supply voltage
VDD
Supply current
IDD
Set with external resistor
2
5
8
mA
Note 1: Performance is guaranteed only under the conditions listed in this table.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
201515D • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • October 22, 2014
3
DATA SHEET • SKY67014-396LF: HIGH LINEARITY, ACTIVE BIAS LNA
Typical Performance Characteristics
1.4
14.0
1.2
13.8
Small Signal Gain (dB)
Noise Figure (dB)
(VDD = 3.3 V, Quiescent Current = 18 mA, TA = +25 C, PIN = –20 dBm, Characteristic Impedance [ZO] = 50 Ω, Tuning Optimized for
2.45 GHz, Unless Otherwise Noted)
1.0
0.8
0.6
0.4
+25 °C
+85 °C
–40 °C
0.2
0
2.40
2.42
2.44
2.46
2.48
13.6
13.4
13.2
13.0
12.8
12.6
12.4
+25 °C
+85 °C
–40 °C
12.2
12.0
2.50
2.40
2.42
2.44
Frequency (GHz)
+25 °C
+85 °C
–40 °C
2.42
2.44
2.46
2.48
–22.5
–23.0
–23.5
–24.0
+25 °C
+85 °C
–40 °C
–24.5
–25.0
2.40
2.50
2.42
2.44
2.48
2.50
Figure 6. Small Signal Reverse Isolation (|S12|) vs Frequency and
Temperature, Narrow Band
+20
Small Signal Gain (dB)
Output Return Loss (dB)
2.46
Frequency (GHz)
Figure 5. Small Signal Input Return Loss (|S11|) vs Frequency and
Temperature, Narrow Band
+25 °C
+85 °C
–40 °C
2.42
2.44
2.46
2.48
2.50
Frequency (GHz)
Figure 7. Small Signal Output Return Loss (|S22|) vs Frequency
and Temperature, Narrow Band
+25 °C
+85 °C
–40 °C
+10
0
–10
–20
–30
–40
–50
0
2
4
6
8
10 12
14 16
18 20
22 24
Frequency (GHz)
Figure 8. Small Signal Gain (|S21|) vs Frequency and
Temperature, Wide Band
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
4
2.50
–22.0
Frequency (GHz)
0
–2
–4
–6
–8
–10
–12
–14
–16
–18
–20
2.40
2.48
Figure 4. Small Signal Gain (|S21|) vs Frequency and
Temperature, Narrow Band
Reverse Isolation (dB)
Input Return Loss (dB)
Figure 3. Noise Figure vs Frequency and Temperature,
Narrow Band (Includes EVB Insertion Losses)
–13.0
–13.5
–14.0
–14.5
–15.0
–15.5
–16.0
–16.5
–17.0
–17.5
–18.0
2.40
2.46
Frequency (GHz)
October 22, 2014 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 201515D
0
–2
–4
–6
–8
–10
–12
–14
–16
–18
–20
Reverse Isolation (dB)
Input Return Loss (dB)
DATA SHEET • SKY67014-396LF: HIGH LINEARITY, ACTIVE BIAS LNA
+25 °C
+85 °C
–40 °C
0
2
4
6
8
10
12
14 16
18 20 22
24
0
–5
–10
–15
–20
–25
–30
–35
–40
–45
–50
+25 °C
+85 °C
–40 °C
0
2
4
6
8
20 22 24
5.0
+25 °C
+85 °C
–40 °C
0
2
4
6
8
10 12
14
16 18
20
22 24
+25 °C
+85 °C
–40 °C
4.5
4.0
3.5
3.0
2.5
2.0
1.5
1.0
0.5
0
2
4
6
Frequency (GHz)
5.0
4.5
OP1dB (dBm)
4.0
3.5
3.0
2.5
2.0
1.5
1.0
0.5
2
4
6
8
10
12
14 16
10 12
14 16
18
20 22
24
Figure 12. Stability Factor (μ1) vs Frequency and Temperature,
Wide Band
+25 °C
+85 °C
–40 °C
0
8
Frequency (GHz)
Figure 11. Small Signal Output Return Loss (| S22 |) vs Frequency
and Temperature, Wide Band
Stability Factor, µ2
14 16 18
Figure 10. Small Signal Reverse Isolation (| S12 |) vs Frequency
and Temperature, Wide Band
Stability Factor, µ1
Output Return Loss (dB)
Figure 9. Small Signal Input Return Loss (| S11 |) vs Frequency
and Temperature, Wide Band
0
–2
–4
–6
–8
–10
–12
–14
–16
–18
–20
10 12
Frequency (GHz)
Frequency (GHz)
18
20 22
24
Frequency (GHz)
Figure 13. Stability Factor (μ2) vs Frequency and Temperature,
Wide Band
+20
+18
+16
+14
+12
+10
+8
+6
+4
+2
0
3.3 V
5.0 V
1.8 V
5
10
15
20
25
30
Quiescent Current (mA)
Figure 14. OP1dB vs Quiescent Current and Voltage
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
201515D • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • October 22, 2014
5
DATA SHEET • SKY67014-396LF: HIGH LINEARITY, ACTIVE BIAS LNA
+35
OIP3 (dBm)
+30
+25
+20
+15
3.3 V
5.0 V
1.8 V
+10
+5
5
10
15
20
25
30
Quiescent Current (mA)
Figure 15. OIP3 vs Quiescent Current and Voltage
Typical Performance Characteristics
1.4
1.04
1.2
13.5
Small Signal Gain (dB)
Noise Figure (dB)
(VDD = 3.3 V, Quiescent Current = 5 mA, TA = +25 C, PIN = –20 dBm, Characteristic Impedance [ZO] = 50 Ω, Tuning Optimized for
2.45 GHz, Unless Otherwise Noted)
1.0
0.8
0.6
0.4
+25 °C
+85 °C
–40 °C
0.2
0
2.40
2.42
2.44
2.46
2.48
13.0
12.5
12.0
11.5
11.0
10.0
2.40
2.50
+25 °C
+85 °C
–40 °C
10.5
2.42
2.44
2.46
2.48
Reverse Isolation (dB)
Input Return Loss (dB)
+25 °C
+85 °C
–40 °C
2.42
2.46
2.50
Frequency (GHz)
Figure 18. Small Signal Input Return Loss (|S11|) vs Frequency
and Temperature, Narrow Band
–22.0
–22.1
–22.2
–22.3
–22.4
–22.5
–22.6
–22.7
–22.8
–22.9
–23.0
2.40
2.50
+25 °C
+85 °C
–40 °C
2.42
2.44
2.46
2.48
2.50
Frequency (GHz)
Figure 19. Small Signal Reverse Isolation (|S12|) vs Frequency
and Temperature, Narrow Band
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
6
2.48
Figure 17. Small Signal Gain (|S21|) vs Frequency and
Temperature, Narrow Band
Figure 16. Noise Figure vs Frequency and Temperature,
Narrow Band (Includes EVB Insertion Losses)
0
–2
–4
–6
–8
–10
–12
–14
–16
–18
–20
–22
–24
2.40
2.44
Frequency (GHz)
Frequency (GHz)
October 22, 2014 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 201515D
+20
0
–2
–4
–6
–8
–10
–12
–14
–16
–18
–20
2.40
Small Signal Gain (dB)
Output Return Loss (dB)
DATA SHEET • SKY67014-396LF: HIGH LINEARITY, ACTIVE BIAS LNA
+25 °C
+85 °C
–40 °C
2.42
2.44
2.46
2.48
+10
0
–10
–20
–30
+25 °C
+85 °C
–40 °C
–40
–50
0
2.50
2
4
6
Figure 20. Small Signal Output Return Loss (|S22|) vs Frequency
and Temperature, Narrow Band
Reverse Isolation (dB)
Input Return Loss (dB)
–5
–10
–15
+25 °C
+85 °C
–40 °C
–20
0
2
4
6
8
10
12
14
16
18
0
–5
–10
–15
–20
–25
–30
–35
–40
–45
–50
–5
4.5
4.0
3.5
3.0
2.5
Stability Factor, μ1
Output Return Loss (dB)
5.0
–10
–15
–20
–25
+25 °C
+85 °C
–40 °C
–30
4
6
8
10
12
16
18
0
2
4
6
8
10
12
14
16
18
Figure 23. Small Signal Reverse Isolation (| S12 |) vs Frequency
and Temperature, Wide Band
0
2
14
Frequency (GHz)
Figure 22. Small Signal Input Return Loss (| S11 |) vs Frequency
and Temperature, Wide Band
0
12
+25 °C
+85 °C
–40 °C
Frequency (GHz)
–35
10
Figure 21. Small Signal Gain (|S21|) vs Frequency and
Temperature, Wide Band
0
–25
8
Frequency (GHz)
Frequency (GHz)
14
16
18
Frequency (GHz)
Figure 24. Small Signal Output Return Loss (| S22 |) vs Frequency
and Temperature, Wide Band
+25 °C
+85 °C
–40 °C
2.0
1.5
1.0
0.5
0
2
4
6
8
10
12
14
16
18
Frequency (GHz)
Figure 25. Stability Factor (μ1) vs Frequency and Temperature,
Wide Band
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
201515D • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • October 22, 2014
7
DATA SHEET • SKY67014-396LF: HIGH LINEARITY, ACTIVE BIAS LNA
Stability Factor, μ2
5.0
+25 °C
+85 °C
–40 °C
4.5
4.0
3.5
3.0
2.5
2.0
1.5
1.0
0.5
0
2
4
6
8
10
12
14
16
18
Frequency (GHz)
Figure 26. Stability Factor (μ2) vs Frequency and Temperature, Wide Band
Evaluation Board Description
Package and Handling Information
The SKY67014-396LF Evaluation Board is used to test the
performance of the SKY67014-396LF LNA. An assembly drawing
for the Evaluation Board is shown in Figure 27. An Evaluation
Board schematic diagram is provided in Figure 28.
Instructions on the shipping container label regarding exposure to
moisture after the container seal is broken must be followed.
Otherwise, problems related to moisture absorption may occur
when the part is subjected to high temperature during solder
assembly.
Table 5 provides the Bill of Materials (BOM) list for Evaluation
Board components needed for 18 mA operation (for applications
that use a bias current ≥12 mA). Table 6 provides the BOM list for
Evaluation Board components needed for 5 mA operation (for
applications that use a bias current <12 mA).
Package Dimensions
The PCB layout footprint for the SKY67014-396LF is provided in
Figure 29. Typical case markings are shown in Figure 30.
Package dimensions for the 8-pin DFN are shown in Figure 31,
and tape and reel dimensions are provided in Figure 32.
The SKY67014-396LF is rated to Moisture Sensitivity Level 1
(MSL1) at 260 C. It can be used for lead or lead-free soldering.
For additional information, refer to the Skyworks Application Note,
Solder Reflow Information, document number 200164.
Care must be taken when attaching this product, whether it is
done manually or in a production solder reflow environment.
Production quantities of this product are shipped in a standard
tape and reel format.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
8
October 22, 2014 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 201515D
DATA SHEET • SKY67014-396LF: HIGH LINEARITY, ACTIVE BIAS LNA
R3
R2
C3
R1
C1
C2 L1
C6
C5
L2
C4
S2394
Figure 27. SKY67014-396LF Evaluation Board Assembly Diagram
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
201515D • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • October 22, 2014
9
DATA SHEET • SKY67014-396LF: HIGH LINEARITY, ACTIVE BIAS LNA
VDD
C3
C6
R1
1
8
N/C
VBIAS
C5
×
L2
C2
L1
2
RF Input
7
RF_OUT/VDD
RF_IN
C4
RF Output
C1
×
×
3
N/C
N/C
N/C
N/C
4
6
×
5
×
S2397
Figure 28. SKY67014-396LF Evaluation Board Schematic
Table 5. SKY67014-396LF Evaluation Board Bill of Materials (18 mA Operation)
Component
Value
Size
Manufacturer
C1
0.5 pF
0402
Murata
GJM1555C1HR50BB01D
C2
10 pF
0402
Murata
GJM1555C1H100JB01D
C3
10 pF
0402
Murata
GRM1555C1H100RZ01D
C4
0.1 μF
0402
Murata
GRM1555R71C104KA88D
C5
22 pF
0402
Murata
GRM1555C1H220JZ01
C6
10000 pF
0402
Murata
GRM155R71H103KA88
L1
2.9 nH
0402
Murata
LQW15AN2N9C00D
L2
2.2 nH
0402
Murata
LQG15HS2N2S02D
R1
2.2 kΩ
0402
Panasonic
ERJ-2GEJ222X
Note: Componenets R2 and R3 shown on the Evaluation Board are 0 Ω jumpers needed only for this board. Customer applications of the LINA can omit these components.
Table 6. SKY67014-396LF Evaluation Board Bill of Materials (5 mA Operation)
Component
Value
Size
Manufacturer
C1
1.2 pF
0402
Murata
GJM1555C1H1R2CB01
C2
10 pF
0402
Murata
GJM1555C1H100JB01D
C3
10 pF
0402
Murata
GRM1555C1H100RZ01D
C4
22 pF
0402
Murata
GRM1555C1H220JZ01
C5
1000 pF
0402
Murata
GRM1555C1H102JA01
C6
0.5 pF
0402
Murata
GRM155C1HR50BZ01
L1
2.9 nH
0402
Murata
LQW15AN2N9C00D
L2
2.2 nH
0402
Murata
LQG15HS2N2S02D
R1
10 kΩ
0402
Panasonic
ERJ-2GEJ103X
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
10
October 22, 2014 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 201515D
DATA SHEET • SKY67014-396LF: HIGH LINEARITY, ACTIVE BIAS LNA
8X 0.70
8X 0.45
R0.20
Pin 1
8X 0.25
0.50 Pitch
2X 0.85
0.25
2X 0.45
Exposed Solder Areas
(Typical)
All dimensions are in millimeters
S1413
Figure 29. SKY67014-396LF PCB Layout Footprint
(Top View)
Pin 1
Indicator
Skyworks Part #
Figure 30. Typical Case Markings
(Top View)
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
201515D • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • October 22, 2014
11
DATA SHEET • SKY67014-396LF: HIGH LINEARITY, ACTIVE BIAS LNA
0.90 +0.10/–0.15
C
2
0.20 Ref
Seating Plane
A
B
0.45 +0.05/–0.07
Exposed Pad
Detail A
0.02 +0.03/–0.02
Pin 1
Indicator
-B-
2
0.15 C
2X
8X
3
0.08 C
Detail C
0.75 ±0.05
0.15 C
2X
1.70 +0.10/–0.15
0.85 +0.05/–0.07
Detail B
2 Places
0.10 C
Top View
Side View
Bottom View
R0.12 Typ
0.25
0.30 ± 0.10
-A-
CL
R0.20
0.5
0.25 +0.05/–0.07 5
0.10 M C A B
0.05 M C
Detail C
8 Places
Detail B
Detail A
All measurements are in millimeters.
Dimensioning and tolerancing according to ASME Y14.5M-1994.
Coplanarity applies to the exposed heat sink slug as well as the terminals..
Plating requirement per source control drawing (SCD) 2504.
Dimension applies to metalized terminal and is measured between 0.15 mm and 0.30 mm from terminal tip.
Figure 31. SKY67014-396LF 8-Pin DFN Package Dimensions
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
12
October 22, 2014 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 201515D
S1945
DATA SHEET • SKY67014-396LF: HIGH LINEARITY, ACTIVE BIAS LNA
∅1.50+ 0.10/–0.00
0.30 ± 0.05 (T)
Pin #1
4.00 ± 0.10
2.00 ± 0.05
4.00 (see Note 4)
1.75 ± 0.10
2.30 (Bo)
A
B
1.00 (Ko)
2.30 (Ao)
8.00 +0.30/–0.10
A
3.50 ± 0.05
B
∅1.00 Min.
R0.30 Max
B
Notes:
1. Carrier tape: black conductive polystyrene.
2. Cover tape material: transparent conductive HSA.
3. Cover tape size: 5.40 mm width.
4. Ten sprocket hole pitch cumulative tolerance = ±0.20 mm.
5. ESD surface resistivity is ≤1 x 108 Ohms/square per EIA, JEDEC
tape and reel specification.
6. Ao and Bo measurement point to be 0.30 mm from bottom pocket.
7. All measurements are in millimeters.
A
S1601
Figure 32. SKY67014-396LF Tape and Reel Dimensions
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
201515D • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • October 22, 2014
13
DATA SHEET • SKY67014-396LF: HIGH LINEARITY, ACTIVE BIAS LNA
Ordering Information
Model Name
SKY67014-396LF LNA
Manufacturing Part Number
SKY67014-396LF
Evaluation Board Part Number
SKY67014-396LF-EVB (18 mA)
SKY67014-396LF-EVB (5 mA)
Copyright © 2011, 2013-2014 Skyworks Solutions, Inc. All Rights Reserved.
Information in this document is provided in connection with Skyworks Solutions, Inc. (“Skyworks”) products or services. These materials, including the information contained herein, are provided by
Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the
information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to
update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes.
No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or
information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks Terms and Conditions
of Sale.
THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A
PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY
DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS
SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION,
LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury,
death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any
damages resulting from such improper use or sale.
Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of
products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for
applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters.
Skyworks and the Skyworks symbol are trademarks or registered trademarks of Skyworks Solutions, Inc., in the United States and other countries. Third-party brands and names are for
identification purposes only, and are the property of their respective owners. Additional information, including relevant terms and conditions, posted at www.skyworksinc.com, are incorporated by
reference.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
14
October 22, 2014 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 201515D