TLE2074, TLE2074A, TLE2074Y
EXCALIBUR LOW-NOISE HIGH-SPEED
JFET-INPUT QUAD OPERATIONAL AMPLIFIERS
SLOS123A – JUNE 1993 – REVISED AUGUST 1994
•
•
•
•
•
25 -V/µs Slew Rate Min
Low Noise
17 nV/√Hz Max at f = 10 kHz
11.6 nV/√Hz Typ at f = 10 kHz
High Gain-Bandwidth Product . . . 10 MHz
± 30 -mA Minimum Short-Circuit Output
Current
•
•
•
Wide Supply-Voltage Range
± ± Input Range Includes the Positive Supply
Macromodel Included
Fast Settling Time Using 10-V Step
400 ns to 10 mV Typ
1.5 µs to 1 mV Typ
EQUIVALENT INPUT NOISE VOLTAGE
vs
FREQUENCY
GAIN-BANDWIDTH PRODUCT
vs
FREE-AIR TEMPERATURE
45
40
13
VCC ± = ± 15 V
VIC = 0
RS = 20 Ω
TA = 25°C
Gain-Bandwidth Product – MHz
V n – Equivalent Input Noise Voltage – nV/
Vn
Hz
50
35
30
25
20
15
10
f = 100 kHz
VIC = 0
VO = 0
RL = 2 kΩ
CL = 100 pF
12
11
VCC ± = ± 15 V
10
VCC ± = ± 5 V
9
8
5
0
10
100
1k
7
–75 – 55 – 35 –15
10 k
5
25
45
65
85 105 125
TA – Free-Air Temperature – °C
f – Frequency – Hz
Figure 1
Figure 2
description
The TLE2074 and TLE2074A are low-noise, high-performance, high-speed, internally compensated
JFET-input quadruple operational amplifiers built using Texas Instruments complementary bipolar Excalibur
process. These devices combine low noise (see Figure 1) with outstanding output drive capability, high slew
rate, and wide bandwidth (see Figure 2).
AVAILABLE OPTIONS
PACKAGED DEVICES
CHIP
FORM
(Y)‡
TA
VIOmax
AT 25°C
SMALL
OUTLINE
(DW)†
CHIP
CARRIER
(FK)
CERAMIC
DIP
(J)
0°C to 70°C
3 mV
5 mV
TLE2074ACDW
TLE2074CDW
—
—
TLE2074ACN
TLE2074CN
—
TLE2074Y
– 40°C to 85°C
3 mV
5 mV
TLE2074AIDW
TLE2074IDW
—
—
TLE2074AIN
TLE2074IN
—
– 55°C to 125°C
3 mV
5 mV
—
TLE2074AMFK
TLE2074MFK
TLE2074AMJ
TLE2074MJ
PLASTIC
DIP
(N)
—
—
† The DW packages are available taped and reeled. Add R suffix to device type (e.g., TLE2074ACDWR).
‡ Chip-form versions are tested at TA = 25°C. For chip-form orders, contact your local TI sales office.
Copyright  1994, Texas Instruments Incorporated
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
On products compliant to MIL-STD-883, Class B, all parameters are
tested unless otherwise noted. On all other products, production
processing does not necessarily include testing of all parameters.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
5–1
TLE2074, TLE2074A, TLE2074Y
EXCALIBUR LOW-NOISE HIGH-SPEED
JFET-INPUT QUAD OPERATIONAL AMPLIFIERS
SLOS123A – JUNE 1993 – REVISED AUGUST 1994
description (continued)
The design features a low audio-band noise of 11.6 nV/√Hz typical at 10 kHz. This, coupled with a 25-V/µs
minimum slew rate, results in the low distortion and high-power bandwidth necessary for high-fidelity audio
applications. Settling time to 0.1% of a 10-V step (1-kΩ/100-pF load) is approximately 400 ns. Gain-bandwidth
product is typically 10 MHz with an 8 MHz minimum. As such, the TLE2074 and TLE2074A offer significant
speed and noise advantages at a low 1.6-mA typical supply current per channel.
The input current characteristics traditionally associated with JFET-input amplifiers have been maintained. Input
offset voltage is graded to a 7 mV and 4 mV maximum for the TLE2074 and TLE2074A, respectively. Typically,
temperature coefficient of input offset voltage is 10.1 µV/°C and typical CMRR and kSVR are 98 dB and 99 dB,
respectively. Device performance is relatively independent of supply voltage over the wide ± 2.25-V to ± 19-V
range. The input common-mode voltage range extends from the positive supply down to VCC – + 4 V without
significant degradation to dynamic performance. Maximum peak output voltage swing is from VCC + – 1 V to
VCC – + 1 V under light loading conditions. The output is capable of sourcing and sinking a minimum of 30 mA
and can sustain shorts to either supply. Care must be taken to ensure that maximum power dissipation is not
exceeded.
Both the TLE2074 and TLE2074A are available in a wide variety of packages, including both the
industry-standard 16-pin wide-body SOIC and chip form for high-density system applications. The C-suffix
devices are characterized for operation from 0°C to 70°C, the I-suffix devices over the – 40°C to 85°C range,
and the M-suffix devices over the full military temperature range of – 55°C to 125°C.
2
15
3
14
4
13
5
12
6
11
7
10
8
9
1OUT
1IN –
1IN +
VCC +
2IN +
2IN –
2OUT
4OUT
4IN –
4IN +
VCC –
3IN +
3IN –
3OUT
NC
1
14
2
13
3
12
4
11
5
10
6
9
7
8
4OUT
4IN –
4IN +
VCC –
3IN +
3IN –
3OUT
1IN+
NC
VCC +
NC
2IN+
4
3 2 1 20 19
18
5
17
6
16
7
15
8
14
9 10 11 12 13
NC – No internal connection
symbol
IN +
+
IN –
–
OUT
5–2
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
NC
3OUT
3IN –
16
1IN –
1OUT
NC
4OUT
4IN –
1
FK PACKAGE
(TOP VIEW)
2IN –
1OUT
1IN –
1IN +
VCC +
2IN +
2IN –
2OUT
NC
J OR N PACKAGE
(TOP VIEW)
2OUT
DW PACKAGE
(TOP VIEW)
4IN+
NC
VCC –
NC
3IN+
TLE2074, TLE2074A, TLE2074Y
EXCALIBUR LOW-NOISE HIGH-SPEED
JFET-INPUT QUAD OPERATIONAL AMPLIFIERS
SLOS123A – JUNE 1993 – REVISED AUGUST 1994
TLE2074Y chip information
This chip, when properly assembled, displays characteristics similar to the TLE2074. Thermal compression or
ultrasonic bonding may be used on the doped-aluminum bonding pads. Chips may be mounted with conductive
epoxy or a gold-silicon preform.
BONDING PAD ASSIGNMENTS
(2)
(1)
(14)
(13)
1IN +
1IN –
(12)
(3)
2 OUT
3IN +
3IN –
4OUT
(3)
(2)
VCC+
(4)
+
–
+
(7)
(10)
(9)
(14)
(1)
–
+
(5)
(6)
1OUT
2IN +
2IN –
(8)
3OUT
–
+
–
(12)
(13)
4IN +
4IN –
(11)
150
(4)
VCC –
(11)
CHIP THICKNESS: 15 TYPICAL
BONDING PADS: 4 × 4 MINIMUM
(10)
(5)
TJmax = 150°C
TOLERANCES ARE ± 10%.
ALL DIMENSIONS ARE IN MILS.
(6)
(7)
(8)
(9)
PIN (11) IS INTERNALLY CONNECTED
TO BACKSIDE OF THE CHIP.
100
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
5–3
5–4
IN +
IN –
Q2
Q1
D1
Q5
Q4
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
Q7
Q6
Q3
R1
Q10
Q9
Q8
equivalent schematic (each channel)
C1
Q12
R3
Q11
R2
C2
R4
D2
Q14
VCC –
R7
C3
Q15
R5
Q13
Q17
C4
Q18
Q16
R6
VCC +
R8
R9
C5
Q21
Q19
Q20
R10
Q22
Q26
Q25
Q24
Q23
R11
Q27
C6
D3
Q29
Q28
R12
Q31
Q30
R13
ACTUAL DEVICE
COMPONENT COUNT
114
Transistors
74
Resistors
10
Diodes
22
Capacitors
R14
OUT
TLE2074, TLE2074A, TLE2074Y
EXCALIBUR LOW-NOISE HIGH-SPEED
JFET-INPUT
QUAD OPERATIONAL AMPLIFIERS
SLOS123A – JUNE 1993 – REVISED AUGUST 1994
TLE2074, TLE2074A, TLE2074Y
EXCALIBUR LOW-NOISE HIGH-SPEED
JFET-INPUT QUAD OPERATIONAL AMPLIFIERS
SLOS123A – JUNE 1993 – REVISED AUGUST 1994
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)†
Supply voltage, VCC + (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 V
Supply voltage, VCC – (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 19 V
Differential input voltage range, VID (see Note 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VCC + to VCC –
Input voltage range, VI (any input) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VCC + to VCC –
Input current, II (each input) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ± 1 mA
Output current, IO (each output) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ± 80 mA
Total current into VCC + . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 160 mA
Total current out of VCC – . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 160 mA
Duration of short-circuit current at (or below) 25°C (see Note 3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . unlimited
Continuous total dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . See Dissipation Rating Table
Operating free-air temperature range, TA: C suffix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0°C to 70°C
I suffix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 40°C to 85°C
M suffix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 55°C to 125°C
Storage temperature range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 65°C to 150°C
Case temperature for 60 seconds: FK package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260°C
Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds: DW or N package . . . . . . . . . . . . . . . 260°C
Lead temperature 1,6 mm (1/16 inch) from case for 60 seconds: J package . . . . . . . . . . . . . . . . . . . . . 300°C
† Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
NOTES: 1. All voltage values, except differential voltages, are with respect to the midpoint between VCC + and VCC – .
2. Differential voltages are at the noninverting input with respect to the inverting input.
3. The output may be shorted to either supply. Temperatures and/or supply voltages must be limited to ensure that the maximum
dissipation rate is not exceeded.
DISSIPATION RATING TABLE
PACKAGE
TA ≤ 25°C
POWER RATING
DERATING FACTOR
ABOVE TA = 25°C
TA = 70°C
POWER RATING
TA = 85°C
POWER RATING
TA = 125°C
POWER RATING
DW
1025 mW
8.2 mW/°C
656 mW
533 mW
205 mW
FK
1375 mW
11.0 mW/°C
880 mW
715 mW
275 mW
J
1375 mW
11.0 mW/°C
880 mW
715 mW
275 mW
N
1150 mW
9.2 mW/°C
736 mW
598 mW
230 mW
recommended operating conditions
Supply voltage, VCC±
Common-mode input voltage
voltage, VIC
VCC ± = ± 5 V
VCC ± = ±15 V
Operating free-air temperature, TA
POST OFFICE BOX 655303
C SUFFIX
I SUFFIX
M SUFFIX
MIN
MAX
MIN
MAX
MIN
MAX
± 2.25
± 19
± 2.25
± 19
± 2.25
± 19
– 0.9
5
– 0.8
5
– 0.8
5
– 10.9
15
– 10.8
15
– 10.8
15
0
70
– 40
85
– 55
125
• DALLAS, TEXAS 75265
UNIT
V
V
°C
5–5
TLE2074, TLE2074A, TLE2074Y
EXCALIBUR LOW-NOISE HIGH-SPEED
JFET-INPUT QUAD OPERATIONAL AMPLIFIERS
SLOS123A – JUNE 1993 – REVISED AUGUST 1994
electrical characteristics at specified free-air temperature, VCC ± = ±5 V (unless otherwise noted)
PARAMETER
VIO
Input offset voltage
αVIO
Temperature coefficient
of input offset voltage
IIO
Input offset current
IIB
Input bias current
TEST CONDITIONS
TA†
25°C
VIC = 0,
0
RS = 50 Ω
VO = 0,
0
Common mode
C
Common-mode
d input
i
voltage
g range
g
VO = 0,
0
VOM +
IO = – 20 mA
IO = 200 µA
VOM –
Maximum negative peak
output voltage swing
IO = 2 mA
IO = 20 mA
RL = 600 Ω
AVD
Large signal
L
Large-signal
i
l diff
differential
i l
voltage amplification
VO = ± 2
2.3
3 V RL = 2 kΩ
RL = 10 kΩ
ri
Input resistance
Common mode
ci
Input
capacitance
zo
Open-loop output impedance
Differential
VIC = 0
VIC = 0
0,
See Figure 5
15
100
15
100
25°C
3.8
Full range
3.7
25°C
3.5
Full range
3.4
25°C
1.5
Full range
1.5
25°C
– 3.8
Full range
– 3.7
25°C
– 3.5
Full range
– 3.4
25°C
– 1.5
Full range
– 1.5
25°C
80
Full range
79
25°C
90
Full range
89
25°C
95
Full range
94
5
to
– 1.9
4.1
3.8
3.5
3.9
3.4
2.3
1.5
– 4.2
– 3.8
pA
V
V
2.3
– 4.2
– 3.7
– 4.1
– 3.5
– 4.1
– 3.4
– 2.4
– 1.5
V
– 2.4
– 1.5
91
80
91
79
100
90
100
89
106
95
dB
106
94
80
• DALLAS, TEXAS 75265
pA
1.5
2.5
† Full range is 0°C to 70°C.
µV/°C
3.7
3.9
2.5
80
mV
4.1
25°C
Full range
UNIT
5
to
– 0.9
11
82
POST OFFICE BOX 655303
5
to
–1
1012
25°C
175
5000
11
68
VCC ± = ± 5 V to ± 15 V,
VO = 0,
RS = 50 Ω
20
1012
Full range
Supply voltage rejection
Supply-voltage
ratio (∆VCC± /∆VIO)
175
25°C
70
kSVR
1400
25°C
25°C
VIC = VICRmin,
VO = 0,
RS = 50 Ω
5
to
– 1.9
5
to
– 0.9
25°C
Common-mode rejection ratio
5–6
30
5000
5
to
–1
3
5.1
10.1
20
f = 1 MHz
CMRR
– 0.5
MAX
30
Full range
IO = – 2 mA
5
TYP
1400
25°C
IO = – 200 µA
MIN
10.1
Full range
RS = 50 Ω
TLE2074AC
MAX
7.1
Full range
F ll range
Full
g
Maximum positive peak
output voltage swing
–1.6
25°C
VIC = 0,
0
See Figure 4
TYP
Full range
25°C
VICR
TLE2074C
MIN
89
80
70
89
68
99
82
80
99
Ω
pF
Ω
dB
dB
TLE2074, TLE2074A, TLE2074Y
EXCALIBUR LOW-NOISE HIGH-SPEED
JFET-INPUT QUAD OPERATIONAL AMPLIFIERS
SLOS123A – JUNE 1993 – REVISED AUGUST 1994
electrical characteristics at specified free-air temperature, VCC ± = ±5 V (unless otherwise noted)
(continued)
PARAMETER
ICC
Supply current
( four amplifiers )
VO = 0
0,
No load
ax
Crosstalk attenuation
VIC = 0,
RL = 2 kΩ
VO = 0
VID = 1 V
VID = – 1 V
IOS
Short circuit output
Short-circuit
current
TA†
TEST CONDITIONS
25°C
TLE2074C
TLE2074AC
MIN
TYP
MAX
MIN
TYP
MAX
5.2
6.3
7.5
5.2
6.3
7.5
Full range
7.5
25°C
25°C
7.5
120
120
– 35
– 35
45
45
UNIT
mA
dB
mA
† Full range is 0°C to 70°C.
operating characteristics at specified free-air temperature, VCC± = ±5 V
PARAMETER
TEST CONDITIONS
TA†
TLE2074C
MIN
TYP
25°C
SR +
P i i slew
Positive
l
rate
SR –
Negative
rate
N
i slew
l
ts
Settling time
Vn
Equivalent input noise
voltage
VN(PP)
Peak-to-peak
q i l
P k p k equivalent
input noise voltage
3V
VO(PP) = ± 2
2.3
V,
AVD = – 1
1,
RL = 2 kΩ
kΩ,
CL = 100 pF,
See Figure 1
Full
range
AVD = – 1,
2-V
2
V step,
RL = 1 kΩ,
CL = 100 pF
TYP
MAX
V/
V/µs
22
38
38
22
V/µs
V/
22
0.25
0.25
0.4
0.4
µs
25°C
To 1 mV
f = 10 kHz
f = 10 Hz to
10 kHz
f = 0.1Hz to
10 Hz
UNIT
35
22
To 10 mV
f = 10 Hz
RS = 20 Ω,
Ω
S Fi
See
Figure 3
MIN
35
25°C
Full
range
TLE2074AC
MAX
25°C
28
55
28
55
11.6
17
11.6
17
6
6
0.6
0.6
nV/√Hz
µV
V
25°C
In
Equivalent input noise
current
VIC = 0,
f = 10 kHz
25°C
2.8
2.8
THD + N
Total harmonic distortion
plus noise
VO(PP) = 5 V,
f = 1 kHz,
kHz
RS = 25 Ω
AVD = 10,
RL = 2 kΩ
kΩ,
25°C
0 013%
0.013%
0 013%
0.013%
B1
Unity-gain bandwidth
VI = 10 mV,
CL = 25 pF,
RL = 2 kΩ,
See Figure 2
25°C
94
9.4
94
9.4
MHz
BOM
Maximum output
output-swing
swing
bandwidth
VO(PP) = 4 V,
RL = 2 kΩ ,
AVD = – 1,
CL = 25 pF
25°C
28
2.8
28
2.8
MHz
φm
Phase margin
g at unity
y
gain
VI = 10 mV,,
CL = 25 pF,
RL = 2 kΩ,,
See Figure 2
25°C
56°
56°
fA/√Hz
† Full range is 0°C to 70°C.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
5–7
TLE2074, TLE2074A, TLE2074Y
EXCALIBUR LOW-NOISE HIGH-SPEED
JFET-INPUT QUAD OPERATIONAL AMPLIFIERS
SLOS123A – JUNE 1993 – REVISED AUGUST 1994
electrical characteristics at specified free-air temperature, VCC ± = ±15 V (unless otherwise noted)
PARAMETER
TEST CONDITIONS
VIO
Input offset voltage
αVIO
Temperature coefficient
of input offset voltage
IIO
Input offset current
IIB
Input bias current
TA†
25°C
VIC = 0,
0
RS = 50 Ω
VO = 0,
0
VO = 0,
0
i i peak
k
M i
Maximum
positive
output voltage swing
IO = – 20 mA
M i
Maximum
negative
i peak
k
output voltage swing
IO = 2 mA
IO = 20 mA
RL = 600 Ω
AVD
Large signal
L
Large-signal
i
l diff
differential
i l
voltage amplification
VO = ± 10 V
RL = 2 kΩ
RL = 10 kΩ
ri
ci
Input resistance
Input
capacitance
VIC = 0
Common
mode
VIC = 0,
25°C
13.8
13.7
25°C
13.5
Full range
13.4
25°C
11.5
Full range
IO = 200 µA
VOM –
See Figure 5
Differential
15
100
15
100
– 13.8
Full range
– 13.7
25°C
– 13.7
Full range
– 13.6
25°C
– 11.5
Full range
– 11.5
25°C
80
Full range
79
25°C
90
Full range
89
25°C
95
Full range
94
1400
175
25
15
to
– 11
14.1
13.8
13.9
13.5
13.9
13.4
12.3
11.5
– 14.2
– 13.8
11.5
– 14.2
– 13.7
– 14
–13.7
– 14
– 13.6
– 12.4
– 11.5
– 12.4
96
80
96
79
109
90
109
89
118
95
118
25°C
80
80
kSVR
Supply voltage rejection ratio
Supply-voltage
(∆VCC± /∆VIO)
VCC ± = ± 5 V to ± 15 V,
VO = 0,
RS = 50 Ω
25°C
82
Full range
81
† Full range is 0°C to 70°C.
• DALLAS, TEXAS 75265
dB
94
2.5
79
V
– 11.5
2.5
80
V
12.3
25°C
25°C
pA
14.1
7.5
Full range
pA
13.7
7.5
VIC = VICRmin,
VO = 0,
RS = 50 Ω
µV/°C
V
25°C
Common mode
Common-mode
rejection ratio
mV
15
to
– 10.9
1012
CMRR
UNIT
15
to
– 11.9
1012
f = 1 MHz
175
5000
25°C
Open-loop output impedance
POST OFFICE BOX 655303
15
to
– 11.9
11.5
25°C
zo
5–8
30
15
to
– 10.9
Full range
3
5.1
5000
15
to
MAX
10.1
25
– 11
IO = – 2 mA
– 0.5
1400
25°C
IO = – 200 µA
5
TYP
30
Full range
RS = 50 Ω
MIN
10.1
Full range
Common-mode
C
d input
i p
voltage
l
range
TLE2074AC
MAX
7.1
Full range
F ll range
Full
g
VOM +
–1.6
25°C
VIC = 0,
0
See Figure 4
TYP
Full range
25°C
VICR
TLE2074C
MIN
98
80
98
79
99
82
81
99
Ω
pF
Ω
dB
dB
TLE2074, TLE2074A, TLE2074Y
EXCALIBUR LOW-NOISE HIGH-SPEED
JFET-INPUT QUAD OPERATIONAL AMPLIFIERS
SLOS123A – JUNE 1993 – REVISED AUGUST 1994
electrical characteristics at specified free-air temperature, VCC ± = ±15 V (unless otherwise noted)
(continued)
PARAMETER
ICC
IOS
Supply current
( four amplifiers )
VO = 0
0,
No load
Crosstalk attenuation
VIC = 0,
RL = 2 kΩ
VO = 0
VID = 1 V
VID = – 1 V
Short circuit output
Short-circuit
current
TA†
TEST CONDITIONS
25°C
TLE2074C
MIN
TYP
MAX
MIN
TYP
MAX
5.2
6.5
7.5
5.2
6.5
7.5
Full range
7.5
25°C
25°C
TLE2074AC
7.5
120
120
– 30
– 45
– 30
– 45
30
48
30
48
UNIT
mA
dB
mA
† Full range is 0°C to 70°C.
operating characteristics at specified free-air temperature, VCC± = ±15 V
PARAMETER
SR +
TEST CONDITIONS
P i i slew
Positive
l
rate
VO(PP) = 10 V,
V AVD = – 1,
1
RL = 2 kΩ
kΩ,
CL = 100 pF,
pF
See Figure 1
SR –
ts
Negative
rate
N
i slew
l
Settling time
Vn
Equivalent input noise
voltage
VN(PP)
Peak-to-peak
p k equivalent
q i l
P k
input noise voltage
AVD = – 1,
10-V
10
V step,
RL = 1 kΩ,
CL = 100 pF
MIN
TYP
25°C
25
40
Full
range
22
25°C
30
Full
range
25
TLE2074AC
MAX
MIN
TYP
25
40
MAX
45
30
45
V/µs
V/
25
0.4
0.4
1.5
1.5
µs
25°C
To 1 mV
f = 10 kHz
f = 10 Hz to
10 kHz
f = 0.1 Hz to
10 Hz
UNIT
V/
V/µs
22
To 10 mV
f = 10 Hz
RS = 20 Ω,
Ω
S Fi
See
Figure 3
TLE2074C
TA†
25°C
28
55
28
55
11.6
17
11.6
17
6
6
0.6
0.6
nV/√Hz
µV
V
25°C
In
Equivalent input noise
current
VIC = 0,
f = 10 kHz
25°C
2.8
2.8
THD + N
Total harmonic distortion
plus noise
VO(PP) = 20 V, AVD = 10,
f = 1 kHz,
kHz
RL = 2 kΩ
kΩ,
RS = 25 Ω
25°C
0 008%
0.008%
0 008%
0.008%
B1
Unity-gain bandwidth
VI = 10 mV,
CL = 25 pF,
25°C
8
10
8
10
MHz
BOM
Maximum output
output-swing
swing
bandwidth
VO(PP) = 20 V, AVD = – 1,
RL = 2 kΩ,
CL = 25 pF
25°C
478
637
478
637
kHz
φm
Phase margin
g at unity
y
gain
VI = 10 mV,,
CL = 25 pF,
25°C
RL = 2 kΩ,
See Figure 2
RL = 2 kΩ,,
See Figure 2
57°
fA/√Hz
57°
† Full range is 0°C to 70°C.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
5–9
TLE2074, TLE2074A, TLE2074Y
EXCALIBUR LOW-NOISE HIGH-SPEED
JFET-INPUT QUAD OPERATIONAL AMPLIFIERS
SLOS123A – JUNE 1993 – REVISED AUGUST 1994
electrical characteristics at specified free-air temperature, VCC ± = ±5 V (unless otherwise noted)
PARAMETER
VIO
Input offset voltage
αVIO
Temperature coefficient
of input offset voltage
IIO
Input offset current
IIB
TEST CONDITIONS
TA†
25°C
VIC = 0,
0
RS = 50 Ω
VO = 0,
0
IO = – 200 µA
IO = – 2 mA
IO = – 20 mA
IO = 200 µA
VOM –
M i
Maximum
negative
i peak
k
output voltage swing
IO = 2 mA
IO = 20 mA
RL = 600 Ω
AVD
Large signal
L
Large-signal
i
l diff
differential
i l
voltage amplification
VO = ± 2
2.3
3 V RL = 2 kΩ
RL = 10 kΩ
ri
Input resistance
Common mode
ci
Input
capacitance
zo
Open-loop output impedance
Differential
VIC = 0
VIC = 0
0,
See Figure 5
25°C
3.8
3.7
25°C
3.5
Full range
3.4
25°C
1.5
– 3.8
Full range
– 3.7
25°C
– 3.5
Full range
– 3.4
25°C
– 1.5
Full range
– 1.5
25°C
80
Full range
79
25°C
90
Full range
89
25°C
95
Full range
94
3
7
30
µV/°C
15
100
15
100
pA
5
nA
20
175
20
175
pA
10
nA
5
to
– 1.9
5
to
–1
5
to
– 1.9
V
5
to
– 0.8
4.1
3.8
4.1
3.7
3.9
3.5
3.9
3.4
2.3
1.5
– 4.2
– 3.8
1.5
– 4.2
– 3.7
– 4.1
– 3.5
– 4.1
– 3.4
– 2.4
– 1.5
– 2.4
91
80
91
79
100
90
100
89
106
95
106
11
11
25°C
2.5
2.5
Full range
68
Supply voltage rejection ratio
Supply-voltage
(∆VCC± /∆VIO)
VCC ± = ± 5 V to ± 15 V,
VO = 0,
RS = 50 Ω
25°C
82
Full range
80
80
† Full range is – 40°C to 85°C.
• DALLAS, TEXAS 75265
dB
94
25°C
VIC = VICRmin,
VO = 0,
RS = 50 Ω
V
– 1.5
1012
CMRR Common-mode rejection ratio
V
2.3
1012
70
mV
10.1
25°C
25°C
POST OFFICE BOX 655303
– 0.5
UNIT
30
1.5
25°C
25°C
5–10
MAX
10.1
5
to
– 0.8
f = 1 MHz
kSVR
TYP
10
5
to
Full range
Full range
MIN
5
–1
RS = 50 Ω
F ll range
Full
g
M i
i i peak
k
Maximum
positive
VOM +
output voltage swing
5
Full range
25°C
VICR
–1.6
Full range
25°C
Input bias current
MAX
9
Full range
VO = 0,
0
TLE2074AI
TYP
Full range
25°C
VIC = 0,
0
See Figure 4
Common-mode
C
d input
i p
voltage
l
range
TLE2074I
MIN
89
80
70
89
68
99
82
80
99
Ω
pF
Ω
dB
dB
TLE2074, TLE2074A, TLE2074Y
EXCALIBUR LOW-NOISE HIGH-SPEED
JFET-INPUT QUAD OPERATIONAL AMPLIFIERS
SLOS123A – JUNE 1993 – REVISED AUGUST 1994
electrical characteristics at specified free-air temperature, VCC ± = ±5 V (unless otherwise noted)
(continued)
PARAMETER
ICC
IOS
Supply current
( four amplifiers )
VO = 0
0,
No load
Crosstalk attenuation
VIC = 0,
RL = 2 kΩ
VO = 0
VID = 1 V
VID = – 1 V
Short-circuit output current
TA†
TEST CONDITIONS
25°C
TLE2074I
TLE2074AI
MIN
TYP
MAX
MIN
TYP
MAX
5.2
6.3
7.5
5.2
6.3
7.5
Full range
7.5
25°C
25°C
7.5
120
120
– 35
– 35
45
45
UNIT
mA
dB
mA
† Full range is – 40°C to 85°C.
operating characteristics at specified free-air temperature, VCC± = ±5 V
PARAMETER
TEST CONDITIONS
TA†
TLE2074I
MIN
TYP
25°C
SR +
Positive
rate
P i i slew
l
SR –
Negative
rate
N
i slew
l
ts
Vn
VN(PP)
Settling time
2.3
V,
VO(PP) = ± 2
3V
AVD = – 1
1,
RL = 2 kΩ
kΩ,
CL = 100 pF,
See Figure 1
AVD = – 1,
2-V
2
V step,
RL = 1 kΩ,
CL = 100 pF
MIN
TYP
MAX
V/µs
V/
20
38
38
20
V/µs
V/
20
0.25
0.25
0.4
0.4
µs
25°C
To 1 mV
f = 10 kHz
f = 10 Hz to
10 kHz
f = 0.1 Hz to
10 Hz
UNIT
35
20
To 10 mV
f = 10 Hz
RS = 20 Ω,
Ω
S Fi
See
Figure 3
MAX
35
25°C
Full
range
Equivalent input noise
voltage
Peak-to-peak
q i l
P k p k equivalent
input noise voltage
Full
range
TLE2074AI
25°C
28
55
28
55
11.6
17
11.6
17
6
6
0.6
0.6
nV/√Hz
µV
V
25°C
In
Equivalent input noise
current
VIC = 0,
f = 10 kHz
25°C
2.8
2.8
THD + N
Total harmonic distortion
plus noise
VO(PP) = 5 V,
f = 1 kHz,
kHz
RS = 25 Ω
AVD = 10,
RL = 2 kΩ
kΩ,
25°C
0 013%
0.013%
0 013%
0.013%
B1
Unity-gain bandwidth
VI = 10 mV,
CL = 25 pF,
RL = 2 kΩ,
See Figure 2
25°C
94
9.4
94
9.4
MHz
BOM
Maximum output
output-swing
swing
bandwidth
VO(PP) = 4 V,
RL = 2 kΩ ,
AVD = – 1,
CL = 25 pF
25°C
28
2.8
28
2.8
MHz
φm
Phase margin
g at unity
y
gain
VI = 10 mV,,
CL = 25 pF,
RL = 2 kΩ,,
See Figure 2
25°C
56°
56°
fA/√Hz
† Full range is – 40°C to 85°C.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
5–11
TLE2074, TLE2074A, TLE2074Y
EXCALIBUR LOW-NOISE HIGH-SPEED
JFET-INPUT QUAD OPERATIONAL AMPLIFIERS
SLOS123A – JUNE 1993 – REVISED AUGUST 1994
electrical characteristics at specified free-air temperature, VCC ± = ±15 V (unless otherwise noted)
PARAMETER
TEST CONDITIONS
VIO
Input offset voltage
αVIO
Temperature coefficient
of input offset voltage
IIO
Input offset current
IIB
TA†
25°C
VIC = 0,
0
RS = 50 Ω
VO = 0,
0
IO = – 200 µA
IO = – 2 mA
IO = – 20 mA
IO = 200 µA
VOM –
M i
Maximum
negative
i peak
k
output voltage swing
IO = 2 mA
IO = 20 mA
RL = 600 Ω
AVD
Large signal
L
Large-signal
i
l diff
differential
i l
voltage amplification
VO = ± 10 V
RL = 2 kΩ
RL = 10 kΩ
ri
ci
Input resistance
VIC = 0
Common
mode
Input
capacitance
VIC = 0,
See Figure 5
Differential
25°C
13.8
13.7
25°C
13.5
Full range
13.4
25°C
11.5
– 13.8
Full range
– 13.7
25°C
– 13.5
Full range
– 13.4
25°C
– 11.5
Full range
– 11.5
25°C
80
Full range
79
25°C
90
Full range
89
25°C
95
Full range
94
3
7
30
µV/°C
15
100
15
100
pA
5
nA
25
175
25
175
pA
10
nA
15
to
– 11.9
15
to
– 11
15
to
– 11.9
V
15
to
– 10.8
14.1
13.8
14.1
13.7
13.9
13.5
13.9
13.4
12.3
11.5
– 14.2
– 13.8
11.5
– 14.2
– 13.7
– 14
–13.5
– 14
– 13.4
– 12.4
– 11.5
– 12.4
96
80
96
79
109
90
109
89
118
95
118
7.5
7.5
25°C
2.5
2.5
25°C
80
80
25°C
80
Full range
79
kSVR
Supply voltage rejection
Supply-voltage
ratio (∆VCC± /∆VIO)
VCC ± = ± 5 V to ± 15 V,
VO = 0,
RS = 50 Ω
25°C
82
Full range
80
† Full range is – 40°C to 85°C.
• DALLAS, TEXAS 75265
dB
94
25°C
VIC = VICRmin,
VO = 0,
RS = 50 Ω
V
– 11.5
1012
Common-mode
Common
mode
rejection ratio
V
12.3
1012
CMRR
mV
10.1
25°C
f = 1 MHz
POST OFFICE BOX 655303
– 0.5
UNIT
30
11.5
25°C
Open-loop output
impedance
5–12
MAX
10.1
15
to
– 10.8
zo
ā
TYP
10
15
to
Full range
Full range
MIN
5
– 11
RS = 50 Ω
F ll range
Full
g
M i
i i peak
k
Maximum
positive
VOM +
output voltage swing
5
Full range
25°C
VICR
–1.6
Full range
25°C
Input bias current
MAX
9
Full range
VO = 0,
0
TLE2074AI
TYP
Full range
25°C
VIC = 0,
0
See Figure 4
Common-mode
C
d input
i p
voltage
l
range
TLE2074I
MIN
98
80
98
79
99
82
80
99
Ω
pF
Ω
dB
dB
TLE2074, TLE2074A, TLE2074Y
EXCALIBUR LOW-NOISE HIGH-SPEED
JFET-INPUT QUAD OPERATIONAL AMPLIFIERS
SLOS123A – JUNE 1993 – REVISED AUGUST 1994
electrical characteristics at specified free-air temperature, VCC ± = ±15 V (unless otherwise noted)
(continued)
PARAMETER
ICC
IOS
Supply current
( four amplifiers )
VO = 0
0,
No load
Crosstalk attenuation
VIC = 0,
RL = 2 kΩ
VO = 0
VID = 1 V
VID = – 1 V
Short circuit output
Short-circuit
current
TA†
TEST CONDITIONS
25°C
TLE2074I
MIN
TYP
MAX
MIN
TYP
MAX
5.2
6.5
7.5
5.2
6.5
7.5
Full range
7.5
25°C
25°C
TLE2074AI
7.5
120
120
– 30
– 45
– 30
– 45
30
48
30
48
UNIT
mA
dB
mA
operating characteristics at specified free-air temperature, VCC± = ±15 V
PARAMETER
SR +
P i i slew
Positive
l
rate
SR –
Negative
rate
N
i slew
l
ts
Vn
VN(PP)
Settling time
TEST CONDITIONS
VO(PP) = ± 10 V
V,
AVD = – 1
1,
kΩ,
RL = 2 kΩ
CL = 100 pF,
See Figure 1
AVD = – 1,
10-V
10
V step,
RL = 1 kΩ,
CL = 100 pF
Peak-to-peak
p k equivalent
q i l
P k
input noise voltage
TYP
25°C
25
40
Full
range
19
25°C
30
Full
range
22
TLE2074AI
MAX
MIN
TYP
25
40
MAX
45
30
45
V/µs
V/
22
0.4
0.4
1.5
1.5
µs
To 1 mV
f = 10 Hz to
10 kHz
f = 0.1 Hz to
10 Hz
UNIT
V/
V/µs
19
25°C
f = 10 kHz
RS = 20 Ω,
Ω
S Fi
See
Figure 3
TLE2074I
MIN
To 10 mV
f = 10 Hz
Equivalent input noise
voltage
TA†
25°C
28
55
28
55
11.6
17
11.6
17
6
6
0.6
0.6
nV/√Hz
µV
V
25°C
In
Equivalent input noise
current
VIC = 0,
f = 10 kHz
25°C
2.8
2.8
THD + N
Total harmonic distortion
plus noise
VO(PP) = 20 V, AVD = 10,
f = 1 kHz,
kHz
RL = 2 kΩ
kΩ,
RS = 25 Ω
25°C
0 008%
0.008%
0 008%
0.008%
B1
Unity-gain bandwidth
VI = 10 mV,
CL = 25 pF,
25°C
8
10
8
10
MHz
BOM
Maximum output
output-swing
swing
bandwidth
VO(PP) = 20 V, AVD = – 1,
RL = 2 kΩ,
CL = 25 pF
25°C
478
637
478
637
kHz
φm
Phase margin at unity gain
VI = 10 mV,,
CL = 25 pF,
25°C
RL = 2 kΩ,
See Figure 2
RL = 2 kΩ,,
See Figure 2
57°
fA/√Hz
57°
† Full range is – 40°C to 85°C.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
5–13
TLE2074, TLE2074A, TLE2074Y
EXCALIBUR LOW-NOISE HIGH-SPEED
JFET-INPUT QUAD OPERATIONAL AMPLIFIERS
SLOS123A – JUNE 1993 – REVISED AUGUST 1994
electrical characteristics at specified free-air temperature, VCC ± = ±5 V (unless otherwise noted)
PARAMETER
VIO
Input offset voltage
αVIO
Temperature coefficient
of input offset voltage
IIO
Input offset current
IIB
TEST CONDITIONS
TA†
TLE2074M
MIN
25°C
VIC = 0,
0
RS = 50Ω
VO = 0,
0
–1.6
Full range
Full range
VO = 0,
0
VICR
IO = – 200 µA
M i
i i peak
k
Maximum
positive
VOM +
output voltage swing
IO = – 2 mA
IO = – 20 mA
M i
Maximum
negative
i peak
k
output voltage swing
IO = 2 mA
IO = 20 mA
RL = 600 Ω
AVD
Large signal
L
Large-signal
i
l diff
differential
i l
voltage amplification
VO = ± 2
2.3
3V
RL = 2 kΩ
RL = 10 kΩ
ri
Input resistance
Common mode
ci
Input
capacitance
zo
Open-loop output impedance
Differential
VIC = 0
VIC = 0
0,
3.8
3.6
25°C
3.5
Full range
3.3
25°C
1.5
Full range
IO = 200 µA
VOM –
25°C
See Figure 5
– 3.8
Full range
– 3.6
25°C
– 3.5
Full range
– 3.3
25°C
– 1.5
Full range
– 1.4
25°C
80
Full range
78
25°C
90
Full range
88
25°C
95
Full range
93
100
15
100
pA
20
nA
20
175
20
175
pA
65
nA
5
to
–1
5
to
– 1.9
V
5
to
– 0.8
4.1
3.8
4.1
3.6
3.9
3.5
3.9
3.3
2.3
1.5
– 4.2
– 3.8
1.4
– 4.2
– 3.6
– 4.1
– 3.5
– 4.1
– 3.3
– 2.4
– 1.5
– 2.4
91
80
91
78
100
90
100
88
106
95
106
25°C
2.5
2.5
Full range
68
Supply voltage rejection ratio
Supply-voltage
(∆VCC± /∆VIO)
VCC ± = ± 5 V to ± 15 V,
VO = 0,
RS = 50 Ω
25°C
82
Full range
80
80
∗On products compliant to MIL-STD-883, Class B, this parameter is not production tested.
† Full range is – 55°C to 125°C.
• DALLAS, TEXAS 75265
dB
93
11
VIC = VICRmin,
VO = 0,
RS = 50 Ω
V
– 1.4
11
CMRR Common-mode rejection ratio
V
2.3
25°C
70
POST OFFICE BOX 655303
5
to
– 1.9
1012
25°C
5–14
15
1012
25°C
kSVR
µV/°C
25°C
f = 1 MHz
mV
30∗
1.4
25°C
UNIT
10.1
5
to
– 0.8
Full range
3
8.5
65
5
to
–1
F ll range
Full
g
– 0.5
MAX
30∗
Full range
RS = 50 Ω
5
TYP
20
25°C
Common-mode
C
d input
i p
voltage
l
range
MIN
10.1
Full range
25°C
Input bias current
TLE2074AM
MAX
10.5
25°C
VIC = 0,
0
See Figure 4
TYP
89
80
70
89
68
99
82
80
99
Ω
pF
Ω
dB
dB
TLE2074, TLE2074A, TLE2074Y
EXCALIBUR LOW-NOISE HIGH-SPEED
JFET-INPUT QUAD OPERATIONAL AMPLIFIERS
SLOS123A – JUNE 1993 – REVISED AUGUST 1994
electrical characteristics at specified free-air temperature, VCC ± = ±5 V (unless otherwise noted)
(continued)
PARAMETER
ICC
IOS
TEST CONDITIONS
Supply current
( four amplifiers )
VO = 0
0,
No load
Crosstalk attenuation
VIC = 0,
RL = 2 kΩ
VO = 0
VID = 1 V
VID = – 1 V
Short circuit output current
Short-circuit
TA†
TLE2074M
TLE2074AM
MIN
TYP
MAX
MIN
TYP
MAX
5.2
6.3
7.5
5.2
6.3
7.5
25°C
Full range
7.5
25°C
7.5
120
120
– 35
– 35
45
45
25°C
UNIT
mA
dB
mA
† Full range is – 55°C to 125°C.
operating characteristics at specified free-air temperature, VCC± = ±5 V
PARAMETER
TEST CONDITIONS
TA†
TLE2074M
MIN
TYP
25°C
SR +
P i i slew
Positive
l
rate
SR –
Negative
rate
N
i slew
l
ts
Settling time
Vn
VN(PP)
VO(PP) = ± 2
3V
2.3
V,
AVD = – 1
1,
RL = 2 kΩ
kΩ,
CL = 100 pF,
See Figure 1
AVD = – 1,
2-V
2
V step,
RL = 1 kΩ,
CL = 100 pF
TYP
MAX
V/
V/µs
18∗
38
38
18∗
V/µs
V/
18∗
0.25
0.25
0.4
0.4
µs
25°C
To 1 mV
f = 10 kHz
f = 10 Hz to
10 kHz
UNIT
35
18∗
To 10 mV
f = 10 Hz
RS = 20 Ω,
Ω,
See Figure 3
MIN
35
25°C
Full
range
Equivalent input noise
voltage
Peak
Peak-to-peak
P k to peakk equivalent
i l
input noise voltage
Full
range
TLE2074AM
MAX
28
25°C
11.6
55∗
17∗
28
11.6
6
6
06
0.6
06
0.6
55∗
17∗
nV/√Hz
µV
V
25°C
f = 0.1 Hz to
10 Hz
In
Equivalent input noise
current
VIC = 0,
f = 10 kHz
25°C
2.8
2.8
THD + N
Total harmonic distortion
plus noise
VO(PP) = 5 V,
f = 1 kHz,
kHz
RS = 25 Ω
AVD = 10,
RL = 2 kΩ
kΩ,
25°C
0 013%
0.013%
0 013%
0.013%
B1
Unity-gain bandwidth
VI = 10 mV,
CL = 25 pF,
RL = 2 kΩ,
See Figure 2
25°C
94
9.4
94
9.4
MHz
BOM
Maximum output
output-swing
swing
bandwidth
VO(PP) = 4 V,
RL = 2 kΩ,
AVD = – 1,
CL = 25 pF
25°C
28
2.8
28
2.8
MHz
φm
Phase margin
g at unity
y
gain
VI = 10 mV,,
CL = 25 pF,
RL = 2 kΩ,,
See Figure 2
25°C
56°
56°
fA/√Hz
∗On products compliant to MIL-STD-883, Class B, this parameter is not production tested.
† Full range is – 55°C to 125°C.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
5–15
TLE2074, TLE2074A, TLE2074Y
EXCALIBUR LOW-NOISE HIGH-SPEED
JFET-INPUT QUAD OPERATIONAL AMPLIFIERS
SLOS123A – JUNE 1993 – REVISED AUGUST 1994
electrical characteristics at specified free-air temperature, VCC ± = ±15 V (unless otherwise noted)
PARAMETER
VIO
Input offset voltage
αVIO
Temperature coefficient
of input offset voltage
IIO
Input offset current
IIB
TEST CONDITIONS
TA†
25°C
VIC = 0,
0
RS = 50 Ω
VO = 0,
0
IO = – 200 µA
VOM +
i i peak
k
M i
Maximum
positive
output voltage swing
IO = – 2 mA
IO = – 20 mA
M i
Maximum
negative
i peak
k
output voltage swing
IO = 2 mA
VO = ± 10 V
RL = 2 kΩ
RL = 10 kΩ
ri
Input resistance
Common mode
ci
Input
capacitance
zo
Open-loop output impedance
Differential
VIC = 0
VIC = 0
0,
25°C
13.5
Full range
13.3
25°C
11.5
15
100
15
100
pA
20
nA
25
175
25
175
pA
65
nA
See Figure 5
15
to
– 11
15
to
– 11.9
V
15
to
– 10.8
14.1
13.8
14.1
13.6
13.9
13.5
13.9
13.3
12.3
11.5
11.4
25°C
– 13.5
Full range
– 13.3
– 13.3
– 11.5 – 12.4
– 11.5 – 12.4
– 11.4
– 11.4
78
25°C
90
Full range
88
25°C
95
Full range
93
– 14
96
–13.5
80
– 14
78
109
90
109
88
118
95
118
1012
25°C
7.5
7.5
25°C
2.5
2.5
80
80
Common-mode rejection ratio
VIC = VICRmin,
VO = 0,
RS = 50 Ω
Full range
78
kSVR
Supply voltage rejection
Supply-voltage
ratio (∆VCC± /∆VIO)
VCC ± = ± 5 V to ± 15 V,
VO = 0,
RS = 50 Ω
25°C
82
Full range
80
∗On products compliant to MIL-STD-883, Class B, this parameter is not production tested.
† Full range is – 55°C to 125°C.
• DALLAS, TEXAS 75265
dB
93
1012
25°C
V
96
25°C
25°C
V
12.3
– 13.6
f = 1 MHz
POST OFFICE BOX 655303
15
to
– 11.9
– 13.6
CMRR
5–16
µV/°C
Full range
Full range
mV
30∗
– 13.8 – 14.2
80
UNIT
10.1
11.4
25°C
3
8.5
– 13.8 – 14.2
Full range
RL = 600 Ω
AVD
13.6
25°C
IO = 20 mA
Large signal
L
Large-signal
i
l diff
differential
i l
voltage amplification
13.8
25°C
IO = 200 µA
VOM –
25°C
MAX
30∗
15
to
– 10.8
Full range
Full range
– 0.5
65
15
to
– 11
F ll range
Full
g
5
TYP
10.1
Full range
RS = 50 Ω
MIN
20
25°C
Input bias current
TLE2074AM
MAX
10.5
Full range
25°C
VICR
–1.6
Full range
VO = 0,
0
TYP
Full range
25°C
VIC = 0,
0
See Figure 4
Common-mode
C
d input
i p
voltage
l
range
TLE2074M
MIN
98
80
80
98
78
99
82
80
99
Ω
pF
Ω
dB
dB
TLE2074, TLE2074A, TLE2074Y
EXCALIBUR LOW-NOISE HIGH-SPEED
JFET-INPUT QUAD OPERATIONAL AMPLIFIERS
SLOS123A – JUNE 1993 – REVISED AUGUST 1994
electrical characteristics at specified free-air temperature, VCC ± = ±15 V (unless otherwise noted)
(continued)
PARAMETER
ICC
IOS
TEST CONDITIONS
Supply current
( four amplifiers )
VO = 0
0,
No load
Crosstalk attenuation
VIC = 0,
RL = 2 kΩ
VO = 0
VID = 1 V
VID = – 1 V
Short-circuit output current
TA†
25°C
TLE2074M
MIN
TYP
MAX
MIN
TYP
MAX
5.2
6.5
7.5
5.2
6.5
7.5
Full range
7.5
25°C
25°C
TLE2074AM
7.5
120
120
– 30
– 45
– 30
– 45
30
48
30
48
UNIT
mA
dB
mA
† Full range is – 55°C to 125°C.
operating characteristics at specified free-air temperature, VCC± = ±15 V
PARAMETER
SR +
TEST CONDITIONS
Positive
rate
P i i slew
l
VO(PP) = 10 V,
V AVD = – 1,
1
RL = 2 kΩ
kΩ,
CL = 100 pF,
pF
See Figure 1
SR –
ts
Negative
rate
N
i slew
l
Settling time
Vn
Equivalent input noise
voltage
VN(PP)
Peakk to peakk equivalent
P
Peak-to-peak
i l
input noise voltage
AVD = – 1,
10
V step,
10-V
RL = 1 kΩ,
CL = 100 pF
TLE2074M
MIN
TYP
25°C
25
40
Full
range
17
25°C
30
Full
range
20
TLE2074AM
MAX
MIN
TYP
25
40
MAX
45
30
45
V/µs
V/
20
0.4
0.4
1.5
1.5
µs
25°C
To 1 mV
f = 10 kHz
f = 10 Hz to
10 kHz
UNIT
V/µs
V/
17
To 10 mV
f = 10 Hz
RS = 20 Ω,
Ω,
See Figure 3
TA†
28
25°C
11.6
55∗
17∗
28
11.6
6
55∗
17∗
nV/√Hz
6
V
µV
25°C
f = 0.1 Hz to
10 Hz
06
0.6
06
0.6
In
Equivalent input noise
current
VIC = 0,
0
f = 10 kHz
25°C
28
2.8
28
2.8
THD + N
Total harmonic distortion
plus noise
VO(PP) = 20 V, AVD = 10,
f = 1 kHz,
kHz
RL = 2 kΩ
kΩ,
RS = 25 Ω
25°C
0 008%
0.008%
0 008%
0.008%
B1
Unity-gain bandwidth
VI = 10 mV,
CL = 25 pF,
25°C
8∗
10
8∗
10
MHz
BOM
output-swing
Maximum output
swing
bandwidth
25°C
478∗
637
478∗
637
kHz
φm
Phase margin
g at unity
y
gain
RL = 2 kΩ,
See Figure 2
VO(PP) = 20 V, AVD = – 1,
RL = 2 kΩ,
CL = 25 pF
VI = 10 mV,,
RL = 2 kΩ,,
CL = 25 pF,
See Figure 2
25°C
57°
fA/√Hz
57°
∗On products compliant to MIL-STD-883, Class B, this parameter is not production tested.
† Full range is – 55°C to 125°C.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
5–17
TLE2074, TLE2074A, TLE2074Y
EXCALIBUR LOW-NOISE HIGH-SPEED
JFET-INPUT QUAD OPERATIONAL AMPLIFIERS
SLOS123A – JUNE 1993 – REVISED AUGUST 1994
electrical characteristics at VCC± = ±15 V, TA = 25°C (unless otherwise noted)
PARAMETER
VIC = 0,
RS = 50 Ω
VO = 0,
VIC = 0,
See Figure 4
VO = 0,
Input bias current
VICR
Common-mode
p voltage
g
C
d iinput
l g range
RS = 50 Ω
VOM +
Maximum
p
positive
peak
p voltage
M i
ii p
k output
l g swing
i g
IO = – 200 µA
IO = – 2 mA
VIO
Input offset voltage
IIO
IIB
Input offset current
TLE2074Y
TEST CONDITIONS
MIN
IO = – 20 mA
IO = 200 µA
VOM –
Maximum
negative
M i
g i peak
p k output
p voltage
l g swing
i g
IO = 2 mA
IO = 20 mA
15
to
– 11
15
to
11.9
13.8
14.1
13.5
13.9
11.5
12.3
– 13.8
– 14.2
– 13.5
– 14
– 11.5
– 12.4
RL = 10 kΩ
95
ci
Input capacitance
zo
Open-loop output impedance
f = 1 MHz
CMRR
Common-mode rejection ratio
VIC = VICRmin,
RS = 50 Ω
kSVR
Supply-voltage rejection ratio (∆VCC± /∆VIO)
VCC ± = ± 5 V to ±15 V,
VO = 0,
RS = 50 Ω
ICC
Supply current ( four amplifiers )
VO = 0,
No load
VO = 0
VID = 1 V
VID = – 1 V
Short-circuit output current
pA
96
VIC = 0
IOS
pA
175
109
Input resistance
VO = 0
0,
100
25
90
ri
Common mode
15
RL = 2 kΩ
VO = ± 10 V
V
V
V
dB
118
Ω
1012
7.5
See Figure 5
pF
2.5
VO = 0,
80
Ω
80
98
dB
82
99
dB
5.2
6.5
– 30
– 45
30
48
7.5
2 kΩ
VI
10 kΩ
VCC +
VCC +
–
+
VO
VI
VCC +
VO
VCC +
RL
CL†
† Includes fixture capacitance
RL
CL†
† Includes fixture capacitance
Figure 3. Slew-Rate Test Circuit
5–18
100 Ω
–
+
POST OFFICE BOX 655303
Figure 4. Unity-Gain Bandwidth
and Phase-Margin Test Circuit
• DALLAS, TEXAS 75265
mA
mA
PARAMETER MEASUREMENT INFORMATION
2 kΩ
UNIT
mV
80
Large-signal
plifi i
L g ig l differential
diff
i l voltage
l g amplification
MAX
5
RL = 600 Ω
AVD
Differential
TYP
TLE2074, TLE2074A, TLE2074Y
EXCALIBUR LOW-NOISE HIGH-SPEED
JFET-INPUT QUAD OPERATIONAL AMPLIFIERS
SLOS123A – JUNE 1993 – REVISED AUGUST 1994
PARAMETER MEASUREMENT INFORMATION
2 kΩ
VCC +
Ground Shield
–
+
RS
RS
VCC +
–
+
VO
VO
VCC –
Picoammeters
VCC –
Figure 5. Noise-Voltage Test Circuit
Figure 6. Input-Bias and OffsetCurrent Test Circuit
VCC +
IN –
IN +
Cic
–
+
Cid
Cic
VO
VCC –
Figure 7. Internal Input Capacitance
typical values
Typical values presented in this data sheet represent the median (50% point) of device parametric performance.
input bias and offset current
At the picoampere bias current level typical of the TLE2074 and TLE2074A, accurate measurement of the bias
current becomes difficult. Not only does this measurement require a picoammeter but test socket leakages can
easily exceed the actual device bias currents. To accurately measure these small currents, Texas Instruments
uses a two-step process. The socket leakage is measured using picoammeters with bias voltages applied but
with no device in the socket. The device is then inserted in the socket and a second test is performed that
measures both the socket leakage and the device input bias current. The two measurements are then
subtracted algebraically to determine the bias current of the device.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
5–19
TLE2074, TLE2074A, TLE2074Y
EXCALIBUR LOW-NOISE HIGH-SPEED
JFET-INPUT QUAD OPERATIONAL AMPLIFIERS
SLOS123A – JUNE 1993 – REVISED AUGUST 1994
TYPICAL CHARACTERISTICS
Table of Graphs
FIGURE
VIO
αVIO
Input offset voltage
Distribution
Temperature coefficient of input offset voltage
Distribution
IIO
Input offset current
vs Free-air temperature
10, 11
IIB
Input bias current
vs Free-air temperature
p
vs Supply
S
l voltage
l
10,, 11
12
VICR
VO
Common-mode input voltage range
vs Free-air temperature
Output voltage
vs Differential input voltage
14, 15
VOM +
Maximum
p
positive
peakk output
M i
iti p
tp t voltage
lt g
vs Output current
vs Free-air temperature
p
vs Supply
S
l voltage
l
16
18,, 19
20
VOM –
Maximum
negative
M i
g ti peak
p k output
tp t voltage
lt g
vs Output current
vs Free-air temperature
p
S
l voltage
l
vs Supply
17
18,, 19
20
VO(PP)
VO
Maximum peak-to-peak output voltage
vs Frequency
21
Output voltage
vs Settling time
22
AVD
L g ig l differential
Large-signal
diff
ti l voltage
lt g amplification
plifi ti
vs Load resistance
vs Free-air temperature
p
vs Frequency
F
23
24,, 25
26 2
26,
27
CMRR
Common-mode rejection ratio
vs Frequency
q
y
vs F
Free-air
i temperature
28
29
kSVR
Supply-voltage rejection ratio
vs Frequency
q
y
i temperature
vs F
Free-air
30
31
ICC
Supply
S pply currentt
vs Supply voltage
vs Free-air temperature
p
Diff
i l input
i
l
vs Differential
voltage
IOS
Sh t i it output
Short-circuit
tp t currentt
vs Supply voltage
vs Time
vs F
Free-air
i temperature
SR
Slew
rate
Sl
t
vs Free
Free-air
air temperature
vs Load resistance
Diff
i l input
i
l
vs Differential
voltage
Vn
Equivalent Input noise voltage
vs Frequency
43
Input referred noise voltage
vs Noise bandwidth
Over
a 10-second
interval
O
d time
i
i
l
44
45
Vn
9
13
32
33
34 35
34,
36
37
38
39, 40
41
42
Third-octave spectral noise density
vs Frequency
46
THD + N
Total harmonic distortion plus noise
vs Frequency
47, 48
B1
Unity-gain bandwidth
vs Load capacitance
49
Gain-bandwidth product
vs Free-air temperature
p
vs Supply
S
l voltage
l
50
51
Gain margin
vs Load capacitance
52
Phase
margin
Ph
gi
vs Free
Free-air
air temperature
vs Supply
pp y voltage
g
L d capacitance
i
vs Load
53
54
55
Phase shift
vs Frequency
26
Noninverting large-signal pulse response
vs Time
56
Small-signal pulse response
vs Time
57
Closed-loop output impedance
vs Frequency
58
Crosstalk attenuation
vs Frequency
59
Am
φm
zo
5–20
8
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
TLE2074, TLE2074A, TLE2074Y
EXCALIBUR LOW-NOISE HIGH-SPEED
JFET-INPUT QUAD OPERATIONAL AMPLIFIERS
SLOS123A – JUNE 1993 – REVISED AUGUST 1994
TYPICAL CHARACTERISTICS†
DISTRIBUTION OF TLE2074
INPUT OFFSET VOLTAGE
50
45
DISTRIBUTION OF TLE2074 INPUT OFFSET
VOLTAGE TEMPERATURE COEFFICIENT
30
VCC = ± 15 V
TA = 25°C
N Package
27
Percentage of Amplifiers – %
Percentage of Units – %
40
35
30
25
20
15
10
5
0
–8
VCC = ± 15 V
TA = – 55°C to 125°C
N Package
24
21
18
15
12
9
6
3
– 4.8
– 1.6
4.8
1.6
0
– 40 – 32 – 24 –16 – 8
8
Figure 8
1
IIB
IIO
0.1
0.01
45
65
85 105 125
I IO – Input Bias and Offset Currents – nA
IIIB
IB and IIO
I IO – Input Bias and Offset Currents – nA
IIIB
IB and IIO
VCC ± = ± 5 V
VIC = 0
VO = 0
25
16
24
32
40
INPUT BIAS CURRENT AND
INPUT OFFSET CURRENT
vs
FREE-AIR TEMPERATURE
100
0.001
– 75 – 55 – 35 – 15 – 5
8
Figure 9
INPUT BIAS CURRENT AND
INPUT OFFSET CURRENT
vs
FREE-AIR TEMPERATURE
10
0
αVIO – Temperature Coefficient – µV/°C
VIO
V IO – Input Offset Voltage – mV
100
10
VCC ± = ± 15 V
VIC = 0
VO = 0
IIB
1
0.1
IIO
0.01
0.001
– 75 – 55 – 35 – 15
TA – Free-Air Temperature – °C
5
25
45
65
85 105 125
TA – Free-Air Temperature – °C
Figure 10
Figure 11
† Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
5–21
TLE2074, TLE2074A, TLE2074Y
EXCALIBUR LOW-NOISE HIGH-SPEED
JFET-INPUT QUAD OPERATIONAL AMPLIFIERS
SLOS123A – JUNE 1993 – REVISED AUGUST 1994
TYPICAL CHARACTERISTICS†
INPUT BIAS CURRENT
vs
TOTAL SUPPLY VOLTAGE
COMMON-MODE INPUT VOLTAGE RANGE
vs
FREE-AIR TEMPERATURE
10 6
VICR
VIC – Common-Mode Input Voltage Range – V
VCC + + 0.5
VICmax = VCC +
IIIB
IB – Input Bias Current – pA
10 5
TA = 125°C
VICmin
10 4
10 3
10 2
TA = 25°C
10 1
TA = – 55°C
10 0
0
5
10
15
20
25
30
35
40
45
RS = 50 Ω
VCC +
VICmax
VCC + – 0.5
VCC – + 3.5
VICmin
VCC – + 3
VCC – + 2.5
VCC – + 2
– 75 – 55 – 35 – 15
Figure 12
RL = 600 Ω
RL = 10 kΩ
RL = 10 kΩ
– 100
RL = 2 kΩ
– 200
– 400
–5 –4
RL = 600 Ω
–3
– 2 – 10
VCC ± = ± 15 V
VIC = 0
RS = 50 Ω
TA = 25°C
300
RL = 2 kΩ
– 300
85 105 125
400
VCC ± = ± 5 V
VIC = 0
RS = 50 Ω
TA = 25°C
100
0
65
OUTPUT VOLTAGE
vs
DIFFERENTIAL INPUT VOLTAGE
VO – Output voltage – V
VO
VO – Output voltage – V
VO
200
45
Figure 13
OUTPUT VOLTAGE
vs
DIFFERENTIAL INPUT VOLTAGE
300
25
TA – Free-Air Temperature – °C
VCC – Total Supply Voltage (referred to VCC – ) – V
400
5
200
RL = 2 kΩ
100
0
RL = 10 kΩ
RL = 10 kΩ
– 100
RL = 2 kΩ
– 200
RL = 600 Ω
– 300
0
1
2
3
4
5
RL = 600 Ω
– 400
– 15
– 10
VID – Differential Input Voltage – µV
–5
0
5
10
VID – Differential Input Voltage – µV
Figure 14
Figure 15
† Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices.
5–22
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
15
TLE2074, TLE2074A, TLE2074Y
EXCALIBUR LOW-NOISE HIGH-SPEED
JFET-INPUT QUAD OPERATIONAL AMPLIFIERS
SLOS123A – JUNE 1993 – REVISED AUGUST 1994
TYPICAL CHARACTERISTICS†
15
12
TA = 25°C
9
TA = 85°C
TA = 125°C
6
3
VCC ± = ± 15 V
0
0
–10
– 20
– 40
– 30
– 50
MAXIMUM NEGATIVE PEAK OUTPUT VOLTAGE
vs
OUTPUT CURRENT
V OM – – Maximum Negative Peak Output Voltage – V
V OM+ – Maximum Positive Peak output Voltage – V
MAXIMUM POSITIVE PEAK OUTPUT VOLTAGE
vs
OUTPUT CURRENT
–15
TA = – 55°C
–12
TA = 125°C
TA = 85°C
–9
–6
–3
VCC ± = ± 15 V
0
0
10
IO – Output Current – mA
| V OM | – Maximum Peak Output Voltage – V
VOM – Maximum Peak Output Voltage – V
V
OM
IO = – 2 mA
3
IO = – 20 mA
1
VCC ± = ± 5 V
–1
IO = 20 mA
–2
–3
IO = 2 mA
–4
–5
– 75 – 55 – 35 –15
IO = 200 µA
5
25
50
45
MAXIMUM PEAK OUTPUT VOLTAGE
vs
FREE-AIR TEMPERATURE
15
IO = – 200 µA
4
0
40
30
Figure 17
MAXIMUM PEAK OUTPUT VOLTAGE
vs
FREE-AIR TEMPERATURE
2
20
IO – Output Current – mA
Figure 16
5
TA = 25°C
65
85 105 125
IO = 200 µA
IO = – 200 µA
14.5
14
IO = 2 mA
IO = – 2 mA
13.5
13
IO = 20 mA
12.5
IO = – 20 mA
12
11.5
11
10.5
VCC ± = ± 15 V
10
– 75 – 55 – 35 –15
TA – Free-Air Temperature – °C
5
25
45
65
85 105 125
TA – Free-Air Temperature – °C
Figure 18
Figure 19
† Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
5–23
TLE2074, TLE2074A, TLE2074Y
EXCALIBUR LOW-NOISE HIGH-SPEED
JFET-INPUT QUAD OPERATIONAL AMPLIFIERS
SLOS123A – JUNE 1993 – REVISED AUGUST 1994
TYPICAL CHARACTERISTICS†
MAXIMUM PEAK-TO-PEAK OUTPUT VOLTAGE
vs
FREQUENCY
25
VOM
VOM – Maximum Peak Output Voltage – V
TA = 25°C
20
IO = – 200 µA
15
IO = – 2 mA
10
5
IO = – 20 mA
0
IO = 20 mA
–5
–10
IO = 2 mA
IO = 200 µA
–15
– 20
– 25
0
2.5
5
7.5
10 12.5 15 17.5 20 22.5 25
V
VO(PP)
O(PP) – Maximum Peak-to-Peak Output Voltage – V
MAXIMUM PEAK OUTPUT VOLTAGE
vs
SUPPLY VOLTAGE
30
VCC ± = ± 15 V
RL = 2 kΩ
25
20
TA = – 55°C
15
TA = 25°C,
125°C
10
VCC ± = ± 5 V
5
TA = – 55°C
0
100 k
1M
f – Frequency – Hz
|VCC ± | – Supply Voltage – V
Figure 20
LARGE-SIGNAL DIFFERENTIAL
VOLTAGE AMPLIFICATION
vs
LOAD RESISTANCE
125
12.5
10
10 mV
120
AVD
A
VD – Large-Signal Differential
Voltage Amplification – dB
1 mV
7.5
5
2.5
VCC ± = ± 15 V
RL = 1 kΩ
CL = 100 pF
AV = – 1
TA = 25°C
Rising
0
Falling
– 2.5
–5
1 mV
– 7.5
10 mV
– 12.5
0
0.5
VIC = 0
RS = 50 Ω
TA = 25°C
115
110
VCC ± = ± 15 V
105
VCC ± = ± 5 V
100
95
– 10
1
1.5
2
90
0.1
ts – Settling Time – µs
1
10
RL – Load Resistance – kΩ
Figure 22
Figure 23
† Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices.
5–24
10 M
Figure 21
OUTPUT VOLTAGE
vs
SETTLING TIME
VO
VO – Output Voltage – V
TA = 25°C,
125°C
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
100
TLE2074, TLE2074A, TLE2074Y
EXCALIBUR LOW-NOISE HIGH-SPEED
JFET-INPUT QUAD OPERATIONAL AMPLIFIERS
SLOS123A – JUNE 1993 – REVISED AUGUST 1994
TYPICAL CHARACTERISTICS†
LARGE-SIGNAL DIFFERENTIAL
VOLTAGE AMPLIFICATION
vs
FREE-AIR TEMPERATURE
110
AVD
A
VD – Large-Signal Differential
Voltage Amplification – dB
107
RL = 10 kΩ
104
101
RL = 2 kΩ
98
95
92
RL = 600 Ω
89
86
VCC ± = ± 5 V
VO = ± 2.3 V
83
80
–75 – 55 – 35 –15
5
25
45
65
85 105 125
TA – Free-Air Temperature – °C
Figure 24
LARGE-SIGNAL DIFFERENTIAL
VOLTAGE AMPLIFICATION
vs
FREE-AIR TEMPERATURE
125
AVD
A
VD – Large-Signal Differential
Voltage Amplification – dB
121
VCC ± = ± 15 V
VO = ± 10 V
RL = 10 kΩ
117
113
RL = 2 kΩ
109
105
101
RL = 600 Ω
97
93
89
85
–75 – 55 – 35 –15
5
25
45
65
85 105 125
TA – Free-Air Temperature – °C
Figure 25
† Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
5–25
TLE2074, TLE2074A, TLE2074Y
EXCALIBUR LOW-NOISE HIGH-SPEED
JFET-INPUT QUAD OPERATIONAL AMPLIFIERS
SLOS123A – JUNE 1993 – REVISED AUGUST 1994
TYPICAL CHARACTERISTICS†
SMALL-SIGNAL DIFFERENTIAL VOLTAGE
AMPLIFICATION AND PHASE SHIFT
vs
FREQUENCY
140
Gain
20°
40°
80
60°
Phase Shift
60
80°
40
100°
20
120°
0
140°
– 20
160°
Phase Shift
AAVD
VD – Small-Signal Differential
Voltage Amplification – dB
120
100
0°
VCC ± = ± 15 V
RL = 2 kΩ
CL = 100 pF
TA = 25°C
180°
– 40
1
10
100
1k
10 k 100 k 1 M
10 M 100 M
f – Frequency – Hz
Figure 26
SMALL-SIGNAL DIFFERENTIAL VOLTAGE
AMPLIFICATION AND PHASE SHIFT
vs
FREQUENCY
30
80°
Phase Shift
20
100°
CL = 25 pF
10
120°
Gain
0
140°
Phase Shift
AAVD
VD – Small-Signal Differential
Voltage Amplification – dB
CL = 100 pF
CL = 100 pF
VCC ± = ± 15 V
VIC = 0
RL = 2 kΩ
TA = 25°C
– 10
CL = 25 pF
– 20
1
4
10
40
160°
180°
100
f – Frequency – MHz
Figure 27
† Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices.
5–26
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
TLE2074, TLE2074A, TLE2074Y
EXCALIBUR LOW-NOISE HIGH-SPEED
JFET-INPUT QUAD OPERATIONAL AMPLIFIERS
SLOS123A – JUNE 1993 – REVISED AUGUST 1994
TYPICAL CHARACTERISTICS†
COMMON-MODE REJECTION RATIO
vs
FREQUENCY
COMMON-MODE REJECTION RATIO
vs
FREE-AIR TEMPERATURE
100
CMRR – Common-Mode Rejection Ratio – dB
CMRR – Common-Mode Rejection Ratio – dB
100
VCC ± = ± 15 V
90
VCC ± = ± 5 V
80
70
60
50
40
30
VIC = 0
VO = 0
RS = 50 Ω
TA = 25°C
20
10
0
10
100
1k
10 k
100 k
1M
97
VCC ± = ± 15 V
94
91
88
VCC ± = ± 5 V
85
82
79
76
73
VIC = VICRmin
VO = 0
RS = 50 Ω
70
–75 – 55 – 35 –15
10 M
Figure 28
kXXXX
SVR – Supply-Voltage Rejection Ratio – dB
kXXXX
SVR – Supply-Voltage Rejection Ratio – dB
65
85 105 125
120
kSVR +
100
80
60
kSVR –
40
– 20
10
45
SUPPLY-VOLTAGE REJECTION RATIO
vs
FREE-AIR TEMPERATURE
120
0
25
Figure 29
SUPPLY-VOLTAGE REJECTION RATIO
vs
FREQUENCY
20
5
TA – Free-Air Temperature – °C
f – Frequency – Hz
∆ VCC ± = ± 5 V to ± 15 V
VIC = 0
VO = 0
RS = 50 Ω
TA = 25°C
100
1k
10 k
100 k
1M
10 M
114
kSVR +
108
102
96
90
kSVR –
84
78
72
66
VIC = 0
VO = 0
RS = 50 Ω
60
–75 – 55 – 35 –15
5
25
45
65
85 105 125
TA – Free-Air Temperature – °C
f – Frequency – Hz
Figure 30
Figure 31
† Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
5–27
TLE2074, TLE2074A, TLE2074Y
EXCALIBUR LOW-NOISE HIGH-SPEED
JFET-INPUT QUAD OPERATIONAL AMPLIFIERS
SLOS123A – JUNE 1993 – REVISED AUGUST 1994
TYPICAL CHARACTERISTICS†
SUPPLY CURRENT
vs
SUPPLY VOLTAGE
SUPPLY CURRENT
vs
FREE-AIR TEMPERATURE
10
10
VIC = 0
VO = 0
No Load
TA = 125°C
9
IICC
CC – Supply Current – mA
8
IICC
CC – Supply Current – mA
VIC = 0
VO = 0
No Load
6
TA = 25°C
TA = – 55°C
4
8
7
VCC ± = ± 15 V
VCC ± = ± 5 V
6
2
5
– 75 – 55 – 35 – 15
0
0
2
4
6
8
10
12
14
16
18
20
Figure 32
45
65
85 105 125
Figure 33
SUPPLY CURRENT
vs
DIFFERENTIAL INPUT VOLTAGE
SUPPLY CURRENT
vs
DIFFERENTIAL INPUT VOLTAGE
20
40
VCC + = 5 V
VCC – = 0
VIC = 4.5 V
TA = 25°C
Open Loop
No Load
16
14
32
12
10
8
6
28
24
20
16
12
4
8
2
4
– 0.25
0
0.25
VID – Differential Input Voltage – V
VCC ± = ± 15 V
VIC = 0
TA = 25°C
Open Loop
No Load
36
IICC
CC – Supply Current – mA
18
IICC
CC – Supply Current – mA
25
TA – Free-Air Temperature – °C
|VCC ±| – Supply Voltage – V
0
– 0.5
5
0.5
0
–1.5 –1.2 – 0.9 – 0.6 – 0.3
0
0.3
0.6 0.9
1.2
VID – Differential Input Voltage – V
Figure 34
Figure 35
† Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices.
5–28
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
1.5
TLE2074, TLE2074A, TLE2074Y
EXCALIBUR LOW-NOISE HIGH-SPEED
JFET-INPUT QUAD OPERATIONAL AMPLIFIERS
SLOS123A – JUNE 1993 – REVISED AUGUST 1994
TYPICAL CHARACTERISTICS†
SHORT-CIRCUIT OUTPUT CURRENT
vs
ELAPSED TIME
60
50
48
40
VID = – 1 V
36
24
12
VO = 0
TA = 25°C
0
–12
– 24
VID = 1 V
– 36
– 48
IIOS
OS – Short-Circuit Output Current – mA
IIOS
OS – Short-Circuit Output Current – mA
SHORT-CIRCUIT OUTPUT CURRENT
vs
SUPPLY VOLTAGE
VID = – 1 V
30
20
10
VCC ± = ± 15 V
VO = 0
TA = 25°C
0
–10
– 20
– 30
VID = 1 V
– 40
– 50
– 60
0
2.5
5
7.5
10 12.5 15 17.5 20 22.5 25
0
60
|VCC ± | – Supply Voltage – V
Figure 36
SLEW RATE
vs
FREE-AIR TEMPERATURE
45
43
VID = – 1 V
VCC ± = ± 15 V
48
32
VCC ± = ± 5 V
0
– 16
VCC ± = ± 5 V
VID = 1 V
– 32
VCC ± = ± 15 V
– 48
– 64
41
V/µ s
SR – Slew Rate – V/xs
IIOS
OS – Short-Circuit Output Current – mA
80
16
180
Figure 37
SHORT-CIRCUIT OUTPUT CURRENT
vs
FREE-AIR TEMPERATURE
64
120
t – Elapsed Time – s
VCC ± = ± 15 V
RL = 2 kΩ
CL = 100 pF
39
SR –
37
35
SR +
33
31
29
27
VO = 0
– 80
–75 – 55 – 35 –15
5
25
45
65
85 105 125
25
–75 – 55 – 35 –15
TA – Free-Air Temperature – °C
5
25
45
65
85 105 125
TA – Free-Air Temperature – °C
Figure 38
Figure 39
† Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
5–29
TLE2074, TLE2074A, TLE2074Y
EXCALIBUR LOW-NOISE HIGH-SPEED
JFET-INPUT QUAD OPERATIONAL AMPLIFIERS
SLOS123A – JUNE 1993 – REVISED AUGUST 1994
TYPICAL CHARACTERISTICS†
SLEW RATE
vs
FREE-AIR TEMPERATURE
SLEW RATE
vs
LOAD RESISTANCE
50
70
SR – Slew Rate – V/µ s
62
40
Rising Edge
30
SR – Slew Rate – V/µ s
66
VCC ± = ± 15 V
RL = 2 kΩ
CL = 100 pF
58
54
50
SR –
46
SR +
42
20
VCC ± = ± 5 V
VO ± = ± 2.5 V
10
0
–10
AV = – 1
CL = 100 pF
TA = 25°C
– 20
38
– 30
34
– 40
30
–75 – 55 – 35 –15
Falling Edge
– 50
100
1k
5
25
45
65
85 105 125
TA – Free-Air Temperature – °C
EQUIVALENT INPUT NOISE VOLTAGE
(SPECTRAL DENSITY)
vs
FREQUENCY
50
Hz
AV = – 1
SR – Slew Rate – V/µ s
V n – Equivalent Input Noise Voltage – nV/
Vn
40
AV = 1
Rising Edge
20
VCC ± = ± 15 V
VO ± = ± 10 V (10% – 90%)
CL = 100 pF
TA = 25°C
10
0
–10
– 20
– 30
Falling Edge
AV = – 1
– 40
– 50
0.1
AV = 1
0.4
1
4
10
45
40
VCC ± = ± 15 V
VIC = 0
RS = 20 Ω
TA = 25°C
35
30
25
20
15
10
5
0
10
100
1k
f – Frequency – Hz
VID – Differential Input Voltage – V
Figure 42
Figure 43
† Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices.
5–30
100 k
Figure 41
SLEW RATE
vs
DIFFERENTIAL INPUT VOLTAGE
30
10 k
RL – Load Resistance – Ω
Figure 40
50
VCC ± = ± 15 V
VO ± = ± 10 V
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
10 k
TLE2074, TLE2074A, TLE2074Y
EXCALIBUR LOW-NOISE HIGH-SPEED
JFET-INPUT QUAD OPERATIONAL AMPLIFIERS
SLOS123A – JUNE 1993 – REVISED AUGUST 1994
TYPICAL CHARACTERISTICS
INPUT-REFERRED NOISE VOLTAGE
vs
NOISE BANDWIDTH
1.2
VCC ± = ± 15 V
VIC = 0
RS = 20 Ω
TA = 25°C
10
Vn – Input-Referred Noise Voltage – µV
Vn
Vn – Input-Referred Noise Voltage – µV
Vn
100
INPUT-REFERRED NOISE VOLTAGE
OVER A 10-SECOND TIME INTERVAL
Peak-to-Peak
1
RMS
0.1
0.01
0.9
VCC ± = ± 15 V
f = 0.1 to 10 Hz
TA = 25°C
0.6
0.3
0
– 0.3
– 0.6
1
10
100
1k
10 k
100 k
0
1
2
Figure 44
Start Frequency: 12.5 Hz
Stop Frequency: 20 kHz
VCC ± = ± 15 V
VIC = 0
TA = 25°C
Noise – dB
– 90
– 95
–100
–105
–110
–115
10
15
20
25
5
6
7
8
9
10
30
TOTAL HARMONIC DISTORTION PLUS NOISE
vs
FREQUENCY
THD + N – Total Harmonic Distortion + Noise – %
– 75
– 85
4
Figure 45
THIRD-OCTAVE SPECTRAL NOISE DENSITY
vs
FREQUENCY
– 80
3
t – Time – s
Noise Bandwidth – Hz
35
40
45
1
AV = 100, RL = 600 Ω
0.1
AV = 100, RL = 2 kΩ
AV = 10, RL = 600 Ω
AV = 10, RL = 2 kΩ
0.01
VCC ± = ± 5 V
VO(PP) = 5 V
TA = 25°C
Filter: 10-Hz to 500-kHz Band Pass
0.001
10
Frequency Bands
100
1k
10 k
100 k
f – Frequency – Hz
Figure 46
Figure 47
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
5–31
TLE2074, TLE2074A, TLE2074Y
EXCALIBUR LOW-NOISE HIGH-SPEED
JFET-INPUT QUAD OPERATIONAL AMPLIFIERS
SLOS123A – JUNE 1993 – REVISED AUGUST 1994
TYPICAL CHARACTERISTICS†
UNITY-GAIN BANDWIDTH
vs
LOAD CAPACITANCE
1
13
Filter: 10-Hz to 500-kHz Band Pass
VCC ± = ± 15 V
VO(PP) = 20 V
TA = 25°C
0.1
B1
B1 – Unity-Gain Bandwidth – MHz
THD + N – Total Harmonic Distortion + Noise – %
TOTAL HARMONIC DISTORTION PLUS NOISE
vs
FREQUENCY
AV = 100, RL = 600 Ω
AV = 100, RL = 2 kΩ
0.01
AV = 10, RL = 600 Ω
AV = 10, RL = 2 kΩ
0.001
10
VCC ± = ± 15 V
VIC = 0
VO = 0
RL = 2 kΩ
TA = 25°C
12
11
10
9
8
7
100
1k
10 k
100 k
0
20
f – Frequency – Hz
Figure 48
60
80
GAIN-BANDWIDTH PRODUCT
vs
SUPPLY VOLTAGE
13
12
11
VCC ± = ± 15 V
10
VCC ± = ± 5 V
9
8
Gain-Bandwidth Product – MHz
13
f = 100 kHz
VIC = 0
VO = 0
RL = 2 kΩ
CL = 100 pF
7
–75 – 55 – 35 –15
f = 100 kHz
VIC = 0
VO = 0
RL = 2 kΩ
CL = 100 pF
TA = 25°C
12
11
10
9
8
7
5
25
45
65
85 105 125
0
TA – Free-Air Temperature – °C
5
10
15
20
VCC +± | – Supply Voltage – V
|VCC
Figure 50
Figure 51
† Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices.
5–32
100
Figure 49
GAIN-BANDWIDTH PRODUCT
vs
FREE-AIR TEMPERATURE
Gain-Bandwidth Product – MHz
40
CL – Load Capacitance – pF
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
25
TLE2074, TLE2074A, TLE2074Y
EXCALIBUR LOW-NOISE HIGH-SPEED
JFET-INPUT QUAD OPERATIONAL AMPLIFIERS
SLOS123A – JUNE 1993 – REVISED AUGUST 1994
TYPICAL CHARACTERISTICS†
PHASE MARGIN
vs
TEMPERATURE
GAIN MARGIN
vs
LOAD CAPACITANCE
10
VIC = 0
VO = 0
RL = 2 kΩ
80°
70°
φ m – Phase Margin
xm
8
Gain Margin – dB
90°
VCC ± = ± 15 V
VIC = 0
VO = 0
RL = 2 kΩ
TA = 25°C
6
4
VCC ± = ± 15 V
CL = 25 pF
60°
VCC ± = ± 5 V
50°
VCC ± = ± 15 V
40°
30°
CL = 100 pF
VCC ± = ± 5 V
20°
2
10°
0°
–75 – 55 – 35 –15
0
0
20
40
80
60
100
Figure 52
80°
80°
70°
70°
CL = 25 pF
xm
φ m – Phase Margin
φ m – Phase Margin
xm
90°
50°
CL = 100 pF
40°
30°
VIC = 0
VO = 0
RL = 2 kΩ
TA = 25°C
10°
45
65
85 105 125
PHASE MARGIN
vs
LOAD CAPACITANCE
90°
20°
25
Figure 53
PHASE MARGIN
vs
SUPPLY VOLTAGE
60°
5
TA – Free-Air Temperature – °C
CL – Load Capacitance – pF
60°
VCC ± = ± 15 V
50°
VCC ± = ± 5 V
40°
30°
VIC = 0
VO = 0
RL = 2 kΩ
TA = 25°C
20°
10°
0°
0°
0
4
8
12
16
20
0
|VCC ±| – Supply Voltage – V
20
40
60
80
100
CL – Load Capacitance – pF
Figure 54
Figure 55
† Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
5–33
TLE2074, TLE2074A, TLE2074Y
EXCALIBUR LOW-NOISE HIGH-SPEED
JFET-INPUT QUAD OPERATIONAL AMPLIFIERS
SLOS123A – JUNE 1993 – REVISED AUGUST 1994
TYPICAL CHARACTERISTICS†
NONINVERTING LARGE-SIGNAL
PULSE RESPONSE
SMALL-SIGNAL PULSE RESPONSE
100
15
TA = 25°C,
125°C
10
5
TA = – 55°C
0
TA = 25°C,
125°C
–5
VCC ± = ± 15 V
AV = 1
RL = 2 kΩ
CL = 100 pF
– 10
50
VO
VO – Output Voltage – mV
VO
VO – Output Voltage – V
TA = – 55°C
– 15
0
VCC ± = ± 15 V
AV = – 1
RL = 2 kΩ
CL = 100 pF
TA = 25°C
– 50
–100
0
1
2
3
t – Time – µs
4
5
0
0.4
0.8
t – Time – µs
Figure 56
1.6
Figure 57
CLOSED-LOOP OUTPUT IMPEDANCE
vs
FREQUENCY
CROSSTALK ATTENUATION
vs
FREQUENCY
100
140
VCC ± = ± 15 V
TA = 25°C
120
10
1
Crosstalk Attenuation – dB
zo – Closed-Loop Output Impedance – Ω
zo
X
1.2
AV = 100
0.1
AV = 10
0.01
AV = 1
100
80
60
40
0.001
10
100
1k
10 k
100 k
1M
10 M
VCC ± = ± 15 V
VIC = 0
RL = 2 kΩ
TA = 25°C
20
10
100
1k
10 k
f – Frequency – Hz
f – Frequency – Hz
Figure 58
Figure 59
† Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices.
5–34
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
100 k
TLE2074, TLE2074A, TLE2074Y
EXCALIBUR LOW-NOISE HIGH-SPEED
JFET-INPUT QUAD OPERATIONAL AMPLIFIERS
SLOS123A – JUNE 1993 – REVISED AUGUST 1994
APPLICATION INFORMATION
macromodel information
Macromodel information provided was derived using PSpice  Parts  model generation software. The Boyle
macromodel (see Note 4) and subcircuit in Figure 60 were generated using the TLE2074 typical electrical and
operating characteristics at TA = 25°C. Using this information, output simulations of the following key parameters
can be generated to a tolerance of 20% (in most cases):
•
•
•
•
•
•
Maximum positive output voltage swing
Maximum negative output voltage swing
Slew rate
Quiescent power dissipation
Input bias current
Open-loop voltage amplification
•
•
•
•
•
•
Unity-gain frequency
Common-mode rejection ratio
Phase margin
DC output resistance
AC output resistance
Short-circuit output current limit
NOTE 4: G.R. Boyle, B.M. Cohn, D. O. Pederson, and J. E. Solomon, “Macromodeling of Integrated Circuit Operational Amplifiers”, IEEE Journal
of Solid-State Circuits, SC-9, 353 (1974).
99
DIN
3
EGND +
VCC +
92
9
FB
–
+
91
90
RSS
ISS
RO2
–
+ DIP
+
VB
RP
VIP
VIN
HLIM
–
+
2
10
+
–
–
VC
R2
IN –
C2
J1
J2
–
7
6
DP
53
+
IN+
VLIM
1
11
DC
GA
12
GCM
–
8
C1
RD1
VCC –
RD2
54
4
–
RO1
DE
5
+
VE
OUT
.SUBCKT TLE2074 1 2 3 4 5
C1
11
12
2.2E–12
C2
6
7
10.00E–12
DC
5
53
DX
DE
54
5
DX
DLP
90
91
DX
DLN
92
90
DX
DP
4
3
DX
EGND
99
0
POLY (2) (3,0) (4,0) 0 .5 .5
FB
7
99
POLY (5) VB VC VE VLP VLN 0
+ 5.607E6 –6E6 6E6 6E6 –6E6
GA
6
0
11 12 333.0E–6
GCM
0
6
10 99 7.43E–9
ISS
3
10
DC 400.0E–6
HLIM
90
0
VLIM 1K
J1
11
2
10 JX
J2
12
1
10 JX
R2
6
9
100.0E3
RD1
4
11
3.003E3
RD2
4
12
3.003E3
R01
8
5
80
R02
7
99
80
RP
3
4
27.30E3
RSS
10
99
500.0E3
VB
9
0
DC 0
VC
3
53
DC 2.20
VE
54
4
DC 2.20
VLIM
7
8
DC 0
VLP
91
0
DC 45
VLN
0
92
DC 45
.MODEL DX D (IS=800.0E–18)
.MODEL JX PJF (IS=15.00E–12 BETA=554.5E–6
+ VTO=–.6)
.ENDS
Figure 60. Boyle Macromodel and Subcircut
PSpice and Parts are trademarks of MicroSim Corporation.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
5–35
TLE2074, TLE2074A, TLE2074Y
EXCALIBUR LOW-NOISE HIGH-SPEED
JFET-INPUT QUAD OPERATIONAL AMPLIFIERS
SLOS123A – JUNE 1993 – REVISED AUGUST 1994
5–36
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
IMPORTANT NOTICE
Texas Instruments (TI) reserves the right to make changes to its products or to discontinue any semiconductor
product or service without notice, and advises its customers to obtain the latest version of relevant information
to verify, before placing orders, that the information being relied on is current.
TI warrants performance of its semiconductor products and related software to the specifications applicable at
the time of sale in accordance with TI’s standard warranty. Testing and other quality control techniques are
utilized to the extent TI deems necessary to support this warranty. Specific testing of all parameters of each
device is not necessarily performed, except those mandated by government requirements.
Certain applications using semiconductor products may involve potential risks of death, personal injury, or
severe property or environmental damage (“Critical Applications”).
TI SEMICONDUCTOR PRODUCTS ARE NOT DESIGNED, INTENDED, AUTHORIZED, OR WARRANTED
TO BE SUITABLE FOR USE IN LIFE-SUPPORT APPLICATIONS, DEVICES OR SYSTEMS OR OTHER
CRITICAL APPLICATIONS.
Inclusion of TI products in such applications is understood to be fully at the risk of the customer. Use of TI
products in such applications requires the written approval of an appropriate TI officer. Questions concerning
potential risk applications should be directed to TI through a local SC sales office.
In order to minimize risks associated with the customer’s applications, adequate design and operating
safeguards should be provided by the customer to minimize inherent or procedural hazards.
TI assumes no liability for applications assistance, customer product design, software performance, or
infringement of patents or services described herein. Nor does TI warrant or represent that any license, either
express or implied, is granted under any patent right, copyright, mask work right, or other intellectual property
right of TI covering or relating to any combination, machine, or process in which such semiconductor products
or services might be or are used.
Copyright  1996, Texas Instruments Incorporated