Life Cycle Thinking in Latin America
12 case studies of LCA and LCM approaches of companies in
the region
Report based on publicly available information.
Copyright ©UNEP/SETAC Life Cycle Initiative (2014)
This publication may be reproduced, in whole or in part and in any form, for educational or non-profit purposes without special
permission from the copyright holder, provided acknowledgement of the source is made. UNEP appreciates receiving a copy of any
publication that uses this publication as a source.
No use of this publication may be made for re-sale or for any other commercial purpose whatsoever without prior permission in
writing from the United Nations Environment Programme.
Disclaimer
The designations employed and the presentation of the material in this publication does not
imply the expression of any opinion whatsoever on the part of UNEP concerning the legal
status of any country, territory, city or area or of its authorities, or concerning delimitation of
its frontiers or boundaries.
Moreover, the views expressed do not necessarily represent the decision or the stated policy
of UNEP, nor does citing of trade names or commercial processes constitute endorsement.
Life Cycle Thinking in Latin America
Acknowledgements
Producer
This document has been produced for the UNEP/SETAC Life Cycle Initiative
Supervision, technical editing and support
Sonia Valdivia (UNEP DTIE)
Authors
Pia Wiche (Wiche Sustentabilidad)
Sonia Valdivia (UNEP DTIE)
Contributors and reviewers (in alphabetical order)
Ana Quiros (Latin American Association for LCA, ALCALA)
Cassia Ugaya and Gil Anderi (Brazilian Life Cycle Association)
Fabien Brones (Natura)
G. Miranda (FIFCO)
Isabel Quispe and Jair Santillan (PUCP)
Llorenç Mila i Canals (UNEP DTIE)
Luiz Gustavo Ortega (Braskem)
María Sofía Correa and Alexander Wotherspoon (Gerdau in Chile)
Dr. Nydia Suppen, Director General, Center for LCA and Sustainable Design (CADIS)
3
Life Cycle Thinking in Latin America
Contents
1
Executive Summary ..................................................................................................................................... 5
2
Case study descriptions .............................................................................................................................. 6
2.1
2.1.1
2.2
Argentina ........................................................................................................................................... 6
Tetra Pak ....................................................................................................................................... 6
Brazil ................................................................................................................................................... 6
2.2.1
Braskem ......................................................................................................................................... 6
2.2.2
Grupo Boticario ............................................................................................................................. 7
2.2.3
Natura ............................................................................................................................................ 7
2.3
2.3.1
2.4
Chile ................................................................................................................................................... 8
Gerdau ........................................................................................................................................... 8
Colombia ............................................................................................................................................ 8
2.4.1
Nutresa .......................................................................................................................................... 8
2.4.2
UNE ................................................................................................................................................ 8
2.5
Costa Rica........................................................................................................................................... 9
2.5.1
Cayuga Collection ......................................................................................................................... 9
2.5.2
Florida Ice and Farm Co. (FIFCO).................................................................................................. 9
2.6
2.6.1
2.7
2.7.1
2.8
2.8.1
Mexico.............................................................................................................................................. 10
TIP Muebles................................................................................................................................. 10
Peru .................................................................................................................................................. 10
ABB .............................................................................................................................................. 10
Latin America ................................................................................................................................... 11
Pepsico ........................................................................................................................................ 11
3
Benefits ...................................................................................................................................................... 12
4
Conclusions ................................................................................................................................................ 12
Annex 1.
Evaluation system ....................................................................................................................... 14
Figures and Tables
Figures
Figure 1. Companies presented in this report, by country.............................................................................. 13
Figure 2. Generic life cycle of a product or service.......................................................................................... 14
Tables
Table 1. Featured companies. The companies have been listed per country and countries have been listed
alphabetically. ...................................................................................................................................................... 5
Table 2. Capability Maturity Model for LCM thinking (adapted from UNEP/SETAC). .................................... 14
Table 3. Selection criteria for all businesses included in the report. .............................................................. 15
4
Life Cycle Thinking in Latin America
1
Executive Summary
This report delivers short summaries about the status of implementation of life cycle approaches of 12
companies in the Latin American region. These twelve case studies were chosen from an initial 24 cases,
using exclusion and selection criteria related to their reported action. Information for the drafting of
these summaries was extracted from the websites of the companies, and is comprised solely by publicly
available information.
The private sector in Latin America is incorporating new elements to the sustainability palette, namely by
including more indicators related to environmental performance. Experience, drive for excellence and
public pressure have fuelled more holistic approaches to environmental sustainability, which are leading
to life cycle thinking. This report shows a small sample of what companies are doing.
Based on the exclusion criteria, seven (7) companies were not considered for further analysis. The other
17 were ranked according to the depth and breadth of their life cycle approach. The top 12 are presented
in this document, and can be seen in Table 1. The criteria for selection, company names and results can
be found in the annex at the end.
Table 1. Featured companies. The companies have been listed per country and countries have been listed
alphabetically.
Company name
Country(ies)
Main business
Tetra Pak
Braskem
Grupo Boticario
Natura
Gerdau
Nutresa
UNE
Cayuga Collection
Florida Ice and Farm Co.
TIP Muebles
ABB
Pepsico
Argentina
Brazil
Brazil
Brazil
Chile
Colombia
Colombia
Costa Rica and Nicaragua
Costa Rica
Mexico
Peru
Latin America
Packaging
Chemical products
Cosmetics
Cosmetics
Steel
Food
Telecommunications
Hotels
Food and drink
Furniture
Electric equipment
Food and drink
It is important to notice that the results and sequence of presentation of the companies do not imply any
qualification.
Main trends observed were having a local focus for action, obtaining internationally recognised
certifications (such as ISO 14001 or FSC) and establishing codes of practice for suppliers. Codes of practice
are used as the driving motor to improve sustainability upstream, sometimes as selection criteria for new
suppliers and others as a guidance to support the enhancement of the sustainable performance
upstream of the organization.
5
Life Cycle Thinking in Latin America
2
Case study descriptions
2.1 Argentina
2.1.1 Tetra Pak
Tetra Pak is a Swedish company, global leader in the processing and packaging of food. They work closely
with customers and suppliers to offer safe, innovative and environmentally responsible products that
cover needs worldwide.
The calculation of the carbon footprint of a tetra pak along its value chain (an indicator used routinely by
Tetra Pak) revealed that only 4% of the impacts were within the company limits. Accordingly, Tetra Pak
started working more closely with suppliers, clients and end users to reduce the carbon footprint of a
box. Work has focused on energy and material efficiency, renewable energy sources and increasing
recycling rates. Also, they have redesigned their filling machines (main product) to use less energy and
water while filling the boxes. In addition, cardboard suppliers are chosen regarding the water stress they
produce in their area.
In Argentina, Tetra Pak uses 100% cardboard from FSC certified forests. It is also actively participating in
the development of city strategies for solid waste management, helping cities to implement waste
segregation in origin. It also takes part in building recycling plants and donates separation belts to
recycler cooperatives. Packages are recycled or used as raw material for producing other things, such as
construction boards.
To know more about Tetra Pak Argentina, please visit
http://www.tetrapak.com/ar/Pages/Tetra_Pak_avanza_en_sus_objetivos_medioambientales.aspx
2.2 Brazil
2.2.1 Braskem
Braskem is a Brazilian petrochemical company that produces thermoplastic resins and other chemical
products. It has production facilities in Brazil, the United States and Germany, and it exports its products
to North and South America, Europe and Asia.
Commitment with the environment started with the foundation of Braskem in 2002. Some key challenges
the company has had to overcome in this time have been to set relevant performance indicators, keep
focus on material aspects of the three bottom line, maintain good communication with all stakeholders,
and shift from traditional environmental management to a model that includes the value chain.
Life Cycle Management at Braskem has three key areas:



Strategic management: measuring performance for decision-making. An example is the ecoefficiency assessment of PVC.
Marketing: add value by showing greater sustainability of Braskem products. E.g.: LCA of flour
sacks, LCA of surgical kits, LCA of plastic cups.
Market protection: protect products from sustainable claims made by competitors. E.g. LCA of
plastic versus paper bags for use in Brazil.
Measuring environmental performance has allowed Braskem to improve significantly in a number of
areas since 2002, such as energy use (-10%), carbon footprint (-13%), waste generation (-62%) and
wastewater generation (-37%). These results have given ground for numerous awards, such as the CDP
Performance Leader 2013.
Recently Braskem started the production of green polyethylene, which opened a completely new supplier
chain for the company. A supplier code of conduct was developed to ensure Braskem providers operate
respecting the environment and society, and to ease the process of LCA calculation by requesting the
report of critical information.
For more information on Braskem, please visit http://rao2013.braskem.com/
6
Life Cycle Thinking in Latin America
2.2.2 Grupo Boticario
Grupo Boticario consists of two companies, O Boticario and Eudora, which produce cosmetics and
perfumes in Brazil. The Group influences their whole value chain, from the extraction and production of
raw materials to the end of life of their packaging. Their stores are franchised, giving the organization
some degree of influence over all aspects of the distribution and selling process.
At the production level, a holistic approach is used to reduce the impact that buildings and operations
have on the environment. Production facilities are designed to take advantage of natural light while
keeping heat outside (energy efficiency) and are equipped with water and energy saving gadgets;
equipment is chosen according to its energy and water use; treated water is reused. There are dedicated
slots in the parking lot for more efficient cars and the company provides transportation for workers and
safe places to park bicycles. Packaging has been redesigned (e.g. refills and separate mirrors for makeup
kits) to make them reusable and have lesser impact. In fact, boxes are used up to ten times.
Upstream of the production process, the Boticario Group has a sustainability programme for suppliers
including guidance and an ethical commitment. The Group helps its providers to reach their goals.
Downstream, at the selling level, stores (usually franchises) have low consumption lightning, promoting
energy efficiency and reducing heat near the products, which in turn increases the delivered value of the
item. Furniture is made with FSC certified wood. The redesign of the paper bags using holographic coating
reduced the requirement of materials and makes them easier to recycle. A special programme directed to
customers allows them to return the packaging of their product, which is then passed on to recyclers’
cooperatives.
For further details on what Grupo Boticario does, please visit: http://www.grupoboticario.com.br
2.2.3 Natura
Natura Cosméticos, a Brazilian-based cosmetics company with a long history in sustainable procurement
and production, has defined its long term goal on a whole new level: to have a positive impact on the
environment and society (going beyond the mitigation and prevention of impacts). To do so, Natura has
developed several performance indicators, from the supply of natural extracts to the impacts at the user
level, going through production and distribution.
It has been a long way since Natura introduced refill packs (still in the early 1980’s). The company started
using life cycle approaches in the late 1990’s and now measures carbon and water footprints, uses LCA,
Social LCA, Life Cycle Costing and Ecodesign. Other indicators are related to packaging, waste, and
extraction of materials from the Amazon rainforest. These indicators deliver a broad picture of
sustainability – environmental, social and economic.
Main challenges of sustainability management in Natura have been: obtaining relevant data, the
increased effort of managing more indicators, training employees, communicating internally and
addressing trade-offs between social, economic and environmental sustainability.
Sustainability indicators have allowed Natura to build brand value through a strong sustainable image,
and to have a consistent sustainability strategy. In the future, the company looks forward to improving
the quality of local inventories and increasing the quantity of indicators in use. As well, the challenge of
trade-offs in decision making will continue to be addressed.
To find out more about what Natura is doing for the environment, please follow this link:
http://www.natura.com.br/www/a-natura/sustentabilidade/
7
Life Cycle Thinking in Latin America
2.3 Chile
2.3.1 Gerdau
Gerdau is a multinational company dedicated to providing solutions and materials based on steel. In
Chile, the group has two production facilities and four recycling centres (where scrap is collected and
packed) certified with ISO 9001, ISO 14001 and OHSAS 18001.
Gerdau has measured the environmental impacts of its two main lines of production using LCA –
reinforcement bars and merchant bars - with results in publicly available EPDs. Gerdau is eager to
communicate, and delivers products with information on technical specifications, use instructions, carbon
footprint (scopes 1, 2 and 3), and a clean product certification (product is free of oils, grease, ionizing
radiation and paints).
Steel is produced from scrap, which has an overall smaller impact in the environment than its ore-based
counterpart, since it avoids the mining stage. It is less energy intensive, and allows for the use of electric
energy over coke and other fossil fuels; it requires less water, much of which can be recycled in the
process (only 1% of the water in use at Gerdau exits as liquid discharge); and allows for the recycling of
scrap, which would otherwise become waste. Gerdau is proud to show a carbon footprint of
reinforcement bars a 70% smaller than world average.
Outside of its operational limits, customers receive greater value from products with a smaller carbon
footprint, which can be used to comply with LEED building standards. Being Gerdau the biggest producer
of recycled steel in Chile and a member of the Green Building Council in Chile gives the company
advantage to enter this new and growing market. On the other side of the value chain, scrap providers
get training in business administration, sustainable driving and safety.
To know more about Gerdau, please visit: http://www.gerdau.cl
2.4 Colombia
2.4.1 Nutresa
Grupo Nutresa is a large Colombian company dedicated to the production of food and drinks. It has a
broad distribution network spanning several Latin American countries and the United States.
The Group has long term sustainability goals at the corporate level comprising water and energy
efficiency, renewable energy, GHG emissions, waste management, packaging use, and environmental
culture. A life cycle approach is used to evaluate performance indicators.
Suppliers are engaged to make the value chain more robust and to share experience and knowledge on
sustainability. For instance, support is been given to the supplier of packaging to achieve carbon
neutrality, hence reducing the carbon footprint of products. Transport contractors are given a publication
developed by Nutresa for the calculation of carbon footprints in transportation, meant to engage the
companies that distribute their products and reduce their scope 3 carbon footprint.
For more information on the environmental programme at Nutresa, please visit:
http://www.gruponutresa.com/es/content/pol%C3%ADtica-ambiental-0
2.4.2 UNE
UNE is a public company in the telecommunications and entertainment sector that operates primarily in
Colombia. They work to minimize their impacts over the environment while delivering more value to their
customers using a life cycle approach to sustainability.
UNE has spent several years working on avoiding and mitigating internal impacts improving energy
efficiency and waste management, looking for innovative ways to use and reuse water, and reducing air
pollution, just to name a few. The scope 3 carbon footprint is calculated routinely and LCA was used to
compare the impacts of 4G LTE (mobile Wi-Fi) with that of cable broadband. Currently, UNE is
transitioning to incorporate life cycle management in the corporate structure, starting by training top
management in LCM, and middle management and sales force in LCA and Service.
8
Life Cycle Thinking in Latin America
Outside of the company, suppliers, contractors and clients are engaged to collaborate in reducing life
cycle impacts. Suppliers are required to commit to a set of good practices, with support from UNE. These
good practices include indicators related to impact mitigation, resource efficiency, management, control,
treatment and disposal of wastewater, emissions to air, solid and hazardous waste and promotion of the
environment. UNE also provides environmental management guidance for contractors. Clients can help
by choosing electronic bills over paper, or giving their old equipment back to UNE for recovery, reuse or
donations. Public services are reducing their use of paper with the help of UNE.
For more information on UNE, please visit the website:
http://www.une.com.co/images/compania/Inversionistas/Doc_accionistas_inver/Asamblea_2014/inform
e_une.pdf
2.5 Costa Rica
2.5.1 Cayuga Collection
Cayuga is an administrator of boutique hotels in Costa Rica and Nicaragua, with a strong commitment to
environmental, social and economic sustainability. Their corporative structure shows the relevance of the
topic, with a sustainability director at the central level and sustainability coordinators in each hotel. They
are in charge of avoiding and mitigating negative impacts and driving positive impacts on the
environment and their close neighbours. Cayuga invests so that every element of the hotels contributes
to the reduction of impacts in the life cycle. From the architectural design to the choice of technology,
including the hotel operation and the activities after the guest has left the premises.
When building a new hotel, Cayuga will look at the impacts through the life cycle of the building, from the
construction materials to the operation. They use only certified wood to build, and choose sites that
respect the natural corridors of wild animals; design and infrastructure are chosen to minimize water and
energy consumption, including features such as passive ventilation and solar heating; the hotels are
operated taking advantage of the natural resources, e.g. laundry is dried in the open, when possible.
Water is treated before returning to the environment and solid waste is recycled (e.g. aluminium, plastic),
or used to make biogas, compost, or feed for local farms (pigs). Local providers are preferred, supporting
local businesses and reducing impacts due to transport.
More information on the life cycle vision of Cayuga can be found here:
http://www.cayugaonline.com/our_sustainable_approach/
2.5.2 Florida Ice and Farm Co. (FIFCO)
FIFCO is a multifaceted organization based in Costa Rica. Its companies are dedicated to food and drink
production and to real estate. Its mission is to become the leader of the drink and canned food sectors in
Central and North America, in terms of the creation of economic, social and environmental value, for
their customers, collaborators, shareholders and communities.
FIFCO has grown from a compliance-based approach to a 3-bottom-line vision, supported by a change in
the business model of the company. The company started using environmental indicators in 2004, with
the certification of the environmental management system by ISO 14001. GRI indicators were added
later, and are now used as key performance indicators for all business units. Although LCA is not used to
its full capacity yet, the current goal is to include more aspects of the methodology and get closer to
achieving life cycle management in all product lines; differentiating FIFCO in the market.
Main challenges in this transformation have been to help management change its vision, find time to
train all collaborators, and gather relevant information to aid decision making. Challenges were overcome
thanks to the help of Higher Management, which supported the inclusion of the environmental
dimension to the company; Human Resources, who related the environmental performance to that of the
workers and their salaries; and Procurement, which relates with the rest of the supply chain.
Some environmental goals that have been achieved in these 10 years, have been:


Giving new life to 99% of waste (making FIFCO a zero waste company). FIFCO has a 50%
recycling rate for packaging (above regional and global rates), coupled to a strong recycling
programme for aluminium cans, plastic bottles and Tetra Pak of any brand.
Florida Bebidas (a subsidiary) has calculated its Carbon Footprint and looks to neutrality by 2017.
9
Life Cycle Thinking in Latin America


Reaching Carbon Neutrality in the bread-making process.
Reducing water use by 20%. The other 80% is “compensated” by providing communities with
access to water and by protecting forests around water sheds, in line with the corporate
commitment to protect biodiversity inside and outside the influence area of buildings.
FIFCO involves its suppliers in sustainable practices by requesting commitment to the “Code for
Responsible Suppliers”, a programme expected to expand in the following years. In addition, the
company communicates results of environmental management on a regular basis both internally and to
the general public.
To know more about FIFCO, please visit: http://www.florida.co.cr/website/SocialResponsibility
2.6 Mexico
2.6.1 TIP Muebles
TIP Muebles is the front end of the Forest and Agricultural Community and Services Unit (UCFAS), located
in Oaxaca, Mexico. UCFAS gathers three indigenous communities that together harvest and sawmill
wood, produce high quality furniture and run the stores (TIP Muebles) where they are sold.
The approach of UCFAS to life cycle thinking is grounded on providing sustainable work and income to the
communities, protection of the environment and preservation of local culture. Using life cycle
management, UCFAS has been able to obtain a certification for responsible forest management from the
Forest Stewardship Council.
Life cycle assessment has been used to improve the design of products and to provide information to
customers such as the Public Green Procurement program. It has also been useful to improve process
efficiency, increase value of products, differentiate in the market, expand to new niches, and be publicly
recognized.
For more information about TIP Muebles, please visit www.tipmuebles.com
2.7 Peru
2.7.1 ABB
ABB is an international company in the electric industry, with a portfolio ranging from transmission lines
to robots. LCA is embedded in the operations, and is used for product design, impact assessment and
sales. Reporting is done using Product Category Rules (PCR). Energy efficiency and carbon footprint are
indicators used throughout ABB buildings, and all is coordinated using an ISO 14001 compliant system.
In Peru, ABB has done the LCA of its products together with local life cycle practitioners. ABB uses a broad
set of environmental aspects as performance indicators, such as emissions, water use, waste, organic
chemicals, and heavy metals, to name a few.
Using the results of environmental impact assessment, ABB has redesigned its products to use non GHG
refrigerants, reduce carbon footprint, choose renewable energy sources (when possible), lessen water
use and increase water reuse, decrease waste and packaging and intensify recycling at the end of life of
their products. LCA has served to replace toxic substances in products, such as organic lead, VOCs (in
paints), phthalates (PVC), cadmium, mercury, and SF6. Efforts have been deployed in the limits of the
organization, but an expansion of the policy to subcontractors is planned.
Suppliers are also integrated into the ABB strategy, having to adhere to a Supplier Code of Conduct which
requests applying the same internal policies from ABB to their own operations. Suppliers are ranked
according to the risk they represent to the company and are supported to achieve the standard.
To know more about ABB Peru, please visit:
http://www.abb.com.pe/cawp/peabb002/8968e4f763c1526ec12578ef0066ecea.aspx
10
Life Cycle Thinking in Latin America
2.8 Latin America
2.8.1 Pepsico
Pepsico is a global food and drink company, which has put sustainability along the value chain in the core
of its focus through the Performance with Purpose programme. The programme has three key areas:
human, environmental and talent sustainability. It serves as an umbrella which guides operation towards
sustainable goals mainly in their direct and downstream operations. Some examples are the choice of
packaging according to their life cycle impacts and training truck drivers to drive more efficiently, using
less fuel and emitting fewer greenhouse gases.
Sustainability is monitored also at the supplier level, with the Sustainable Agriculture Initiative. This
programme is directed to help critical suppliers improve yields, run farms more efficiently and use less
agrochemicals, which in turn reduce the life cycle impacts of Pepsico products.
Pepsico works with numerous performance indicators, some internally managed, and some certified by
external entities, such as the Rainforest Certification for potato and seed suppliers in Chile, or the Global
Good Agricultural Practices for Argentina and Brazil.
In those ways Pepsico stands to the challenge of sustainability both upstream and downstream of their
operations, using own or external tools, engaging in the way suppliers, recyclers and their staff.
More information about what Pepsico is doing in sustainability in this link:
http://www.pepsico.com/Purpose/Performance-with-Purpose/Sustainability-Reporting
11
Life Cycle Thinking in Latin America
3
Benefits
The analysed companies declared to have one or more of the following environmental, social and socioeconomic benefits from the application of LCA. Examples of companies reaping these benefits are given
in parenthesis.













4
Decoupling growth from environmental impacts (Gerdau)
Reduction of operation, transport, management, disposal and meeting costs (Braskem)
Increased working productivity (e.g. web conferences instead of meetings at ABB)
Increased security and business sustainability in time, by making the supply chain more robust in
critical raw materials or services (Pepsico)
Improved sustainability performance of the supply chain (e.g. Pepsico, Natura, Grupo Boticário,
Nutresa)
Increased efficiency of resources use (e.g. improved energy, water and resource efficiency. UNE)
Increased use of renewable energies (e.g.: use of renewables or waste as energy source. Black
liquor, solar power)
Identification, quantification and management of environmental risks in operations. E.g.:
predicting and preparing for greater energy demand due to climate change (Pepsico, ABB)
Reduction of waste (Cayuga Collection)
Improved community relations (Cayuga Collection, UNE, FIFCO)
Better quality of life at work. E.g.: A/C control in offices (ABB)
More value and greater quality to products. E.g.: VOC-less paints (ABB), LEED compliant steel
(Gerdau)
International and national awards or recognition (ABB, Braskem, Natura, TIP Muebles)
Conclusions
A number of different approaches can be seen across the region, which show varying levels of depth in
the application of environmental sustainability indicators. It was apparent from the research that
certification schemes such as FSC or Rainforest Alliance and international standards such as ISO 9001 and
ISO 14001 are widely used by the industry and support the collection of data necessary for environmental
management, but not necessarily to allow a holistic assessment or carry out an LCA. The companies
(shown geographically in Figure 1) prioritized topics which were locally relevant, and applied solutions
and strategies that fit their own organizational and local culture. Overall, companies seem to be following
voluntary reporting and monitoring schemes instead of waiting for national legislation to emerge.
12
Life Cycle Thinking in Latin America
Figure 1. Companies presented in this report, by country.
A popular trend is establishing “Codes of Practice” for suppliers, and engaging them to improve their own
environmental performance. Those that have integrated sustainable supply chain management
programmes and have completed carbon footprints and water footprints are the closest ones to LCA
based approaches. Those companies with greater advance redesign their processes and choose new
materials to meet environmental, social and business goals.
13
Life Cycle Thinking in Latin America
Annex 1.
Evaluation system
This evaluation system is designed to measure the impact of businesses on the life cycle of their products
or services. Businesses with shorter experience will be more focused on compliance and internal
efficiency while others with more experience will be looking at establishing criteria for the election of
suppliers and will work to reduce impacts throughout the life cycle.
Raw material
extraction and
energy
production
Processing
Distribution
Use
End of Life
(EoL)
Figure 2. Generic life cycle of a product or service.
In general, broader influence in the life cycle will be hand in hand with higher maturity levels in a
Capability Maturity Model (CMM)1.
Table 2. Capability Maturity Model for LCM thinking (adapted from UNEP/SETAC1).
Maturity Level
1.
Ad hoc
2.
Managed
3.
Defined
4.
Quantified
5.
Optimizing
Description
Chaotic, success depends on heroic
effort of individual.
Requirements managed, measured, and
repeatable results on a project basis.
Standard processes, consistent across
organization, measures of process and
work products.
Quantified process control, quantified
objectives, special causes of variation
corrected. Value chain.
Process improvement objectives
continually revised to reflect changing
business objectives: agile and innovative
workforce.
Comments for this report
Companies at this stage were not
considered in this report
This corresponds with internal
environmental management and
compliance
First key performance indicators are
defined and measured
Goals are set to manage the
environmental performance of the
company
Environmental indicators are
embedded in the organization, and
product/service design is optimized
to meet goals.
There is a clear trend towards sustainability between companies in Latin America. In order to classify and
group them, the following criteria were defined.
Exclusion criteria: a company must fulfil all of them to be analysed.
1.
2.
3.
4.
Sustainability information was available in web page
Has sustainability policy or strategy defined and published
Is already taking steps to meet sustainability goals
No complaints or serious concerns from relevant stakeholders have been identified in the press
media.
Businesses in the “Ad hoc” maturity level are not considered for further analysis.
Selection criteria: they are used to define where in the CMM each business is (see next page for details).
1.
2.
3.
4.
Scope of environmental monitoring: range in which the organization accounts for its impacts.
Sustainability management in organizational limits: management practices in the organizational
limits, such as corporative policies and key performance indicators.
Upstream sustainability management: engagement with suppliers to reduce the overall impact
of the organizational activities.
Downstream sustainability management: involvement in reducing and mitigating impacts
downstream of the organization. E.g.: eco-design or alliances with recyclers.
1
Adapted from UNEP/SETAC 2009. “Life Cycle Management: How business uses it to decrease footprint, create
opportunities and make value chains more sustainable”. Accessed: 16/07/2014. Available at:
http://www.unep.fr/shared/publications/pdf/DTIx1208xPA-LifeCycleApproach-Howbusinessusesit.pdf
14
Life Cycle Thinking in Latin America
Table 3. Selection criteria for all businesses included in the report.
Score
Criteria
0
1
2
3
Does not measure impacts or
no information available.
Measures impacts in the
organization (scope 1) at least
in one category.
Measures internal and energyrelated impacts (scope 1 and
2) in more than two impact
categories.
Measures impacts in the value
chain (scope 3) in more than 3
categories, for at least one
material.
Internal
Management
Does not have a sustainability
policy, statement or plan or no
information available.
Has a clear sustainability policy
or statement published on
website.
Has performance indicators to
measure progress and shows
intention of improving them
Has impact
reduction/mitigation goals and
uses performance indicators to
measure and report progress
Upstream
management
Does not engage suppliers in
sustainability management or
no information available.
Has criteria to do sustainable
purchases
Has criteria to choose
suppliers, which include
sustainable management
practices
Works with suppliers to
mitigate and reduce impacts
on the value chain
Downstream
management
Does not invest or plan to
prevent or mitigate
downstream impacts or no
information available.
Engages users of product or
service to have a more
sustainable experience.
Example: use instructions.
Actively engages in recycling
products after use or mitigates
impacts (Mitigation approach).
Designs product(s) to have less
impacts on the downstream
(Prevention approach)
Scope
Scores range from 0 (lowest) to 3 (highest) and were used to assess the performance of the companies included in this report.
15
Life Cycle Thinking in Latin America
About the Life Cycle Initiative
The Global Life Cycle Initiative was established by UNEP and SETAC. Among other things, the Life Cycle
Initiative builds upon and provides support to the on-going work of UNEP on sustainable consumption
and production, such as Industry Outreach, Industrial Pollution Management, Sustainable Consumption,
Cleaner and Safer Production, Global Reporting Initiative (GRI), Global Compact, UN Consumer
Guidelines, Tourism, Advertising, Eco-design and Product Service Systems.
The Initiative’s efforts are complemented by SETAC’s international infrastructure and its publishing efforts
in support of the LCA community.
The Life Cycle Initiative is a response to the call from governments for a life cycle economy in the Malmö
Declaration (2000). It contributes to the 10-year framework of programmes to promote sustainable
consumption and production patterns, as requested at the World Summit on Sustainable Development
(WSSD) in Johannesburg (2002).
The Life Cycle Initiative’s vision is a world where life cycle approaches are mainstreamed,
and its mission is to enable the global use of credible life cycle knowledge for more sustainable societies.
Our current work is building on the Life Cycle Initiative’s continual strength to maintain and enhance life
cycle assessment and management methodologies and build capacity globally. As we look to the future,
Life Cycle Assessment (LCA) and Life Cycle Management (LCM) knowledge is the Life Cycle Initiative’s
anchor, but we will advance activities on LCA and LCM to make a difference within the real world.
Therefore, the renewed objectives are the following ones:
Objective 1:
Enhance the global consensus and relevance of existing and emerging life cycle methodologies and data
management;
Objective 2:
Expand capability worldwide to apply and to improve life cycle approaches; making them operational for
organisations;
Objective 3:
Communicate current life cycle knowledge and be the global voice of the Life Cycle community to
influence and partner with stakeholders.
For more information, see www.lifecycleinitiative.org
16