THE LEADER
"Photo courtesy of Modern Home Systems, www.modernhomesystems.com"
IN
ARCHITECTURAL AUDIO™
S o n a m p s
SONANCE SONAMP® AMPLIFIERS provide superior sound quality to any room in
your house. Whether it’s listening to music while you and your family enjoy a
relaxing dinner in the dining room or enjoying a movie together in your home
theater, Sonance’s Sonamp amplifiers deliver a powerful sound experience that’s
pure and precise.
Sonance offers a broad line of amplifiers for a variety of applications. From the
ASAP1 and ASAP2 products to automatically override distributed audio in a master
bedroom or home office, to 2 or 12-channel distributed audio amplifiers, to our
Sonamp 5150 THX Ultra certified home theater amplifier, all Sonamps provide
power and reliable sound reproduction.
All of our amplifiers come in regular and rack mount faceplate chassis designs, so
your custom installer can easily hide the amplifiers away in a rack, armoire, or
put them out in in the open.
Sonance's Smart Amplifier Technology enables customization and future upgradability.
"Photo courtesy of Modern Home Systems, www.modernhomesystems.com"
·
SAT™ Smart Amplifier Module bay on the ASAP2 SAT & SAT275 allows for
custom applications and future upgradability of the amplifier
·
Independent controls for more flexibility
·
Reliable
·
5-year warranty
SONAMP
S P E C I F I C AT I O N S
Home Theater Amplifier
2-Channel Amplifiers:
5150 & 5150 RMF
2120T & 2120T RMF
SAT275 & SAT275 RMF
SAT275x3 & SAT275x3 RMF
Sonamp Cinema 5150 Theater Amplifier
Power Output: 165 W/ch x 5 @ 8 Ohms / 200
W/ch x 5 @ 4 Ohms Dynamic Headroom:
+2.5 dB x 5 @ 8 Ohms / +1 dB x 5 @ 4 Ohms.
Total Harmonic Distortion: 0.03% 20Hz-20kHz
@ 8 Ohms / 0.10% 20Hz-20kHz @ 4 Ohms.
I.M. Distortion (SMPTE 4:1) @ 8 Ohms:
0.035% @ 1 to 165 Watts, 8 Ohms.
Signal to Noise Ratio: -100dB below rated
output (“A Weighted”). Input Sensitivity: 100
mv for 1 Watts RMS @ 8 Ohms. Overall Gain:
1.0 volt for 100 Watts RMS @ 8 Ohms (THX
Cal.). Power Consumption: 1800 Watts
maximum 4 Ohms, full power. BTU/HR: 2732
AC Fuse: 15A, 250V, 314 Type/MDL. Power
Remote Trigger: 5-24 VDC / AC @ 5mA.
Dimensions (W x H x D): 16-3/4” x 9-1/2” x
14-1/2” (425mm x 243mm x 370mm).
Weight: 83 lbs. (38 kg)
Rated Power (20-20kHz) RMS: 120 watts per
channel @8 ohms •160 watts per channel
@ 4 ohms Total Harmonic Distortion: .05%
20Hz-20kHz @8 ohms(120 WRMS) • .1% 20Hz20kHz @4 ohms(160 WRMS) I.M. Distortion
(SMPTE 4:1) .02% @ 1Watt (8 ohms) • 0.02%
@ 60 watts (8 ohms) Signal to Noise Ratio:
-100dB below rated output (A-weighted)
Input Sensitivity: 1.1 Volt for 120 watts RMS
@ 8 ohms Input Impedance: 47K ohms Power
Consumption: 750 watts, maximum 4 ohms
full power • 10 watts, idle no signal BTU/HR:
1332 Dimensions (W x H x D):16-3/4" x 55/8" x 12-5/8" (425mm x 143mm x 321mm)
Shipping Weight: 26 lbs (11.8 kg)
“SAT Module Bay for application flexibility and
future upgradability”Rated Power (20-20kHz)
RMS: 75 Watts per channel @ 8 Ohm, 125 Watts per
channel @ 4 Ohm, 135 Watts per channel @ 2.7
Ohm Bridged Power (20-20kHz) RMS: 250 Watts
per channel @ 8 Ohm, 300 Watts per channel @ 4
Ohm IHF Dynamic Power: 120 Watts per channel @
8 Ohm,194 Watts per channel @ 4 Ohm, 239 Watts per
channel @ 2.7 Ohm IHF Dynamic Headroom: +1.75
dB @ 8 Ohm,+ 1.9 dB @ 4 Ohm, + 2.5 dB @ 2.7
Ohm Total Harmonic Distortion: 0.05% 20 Hz - 20
kHz @ 8 Ohm, 0.08% 20 Hz - 20 kHz @ 4 Ohm,
0.15% 20 Hz - 20 kHz @ 2.7Ohm Total Harmonic
Distortion (Bridged): 0.05% 20 Hz - 20 kHz @ 8 Ohm,
0.10% 20 Hz - 20 kHz @ 4 Ohm I.M. Distortion
(SMPTE 4:1) @ 8 Ohm: 0.008% @ 1 watt 0.015% @
75 watts Power Consumption: 575 watts Signal
to Noise Ratio: -105 dB below rated BTU/HR:
1330 Input Sensitivity: 0.700 volts for rated output
(75 watts @ 8 Ohm) Input Impedance: 47 K Ohm
minimum Power Requirement: 120 VAC, 50/60 Hz
Dimensions (W x H x D): 16-3/4" x 3-1/2" x 12-1/2"
(425mm x 89mm x 318mm)
“SAT Module Bay for application flexibility and
future upgradability” Rated Power (20-20kHz)
RMS: 75 Watts per channel @
8 Ohm Bridged Power (20-20kHz) RMS: 250
Watts per channel @ 8 Ohm, 300 Watts per channel
@ 4 Ohm IHF Dynamic Power: 120 Watts per channel
@ 8 Ohm,194 Watts per channel @ 4 Ohm, 239 Watts per
channel @ 2.7 Ohm IHF Dynamic Headroom: +1.75
dB @ 8 Ohm,+ 1.9 dB @ 4 Ohm, + 2.5 dB @ 2.7
Ohm Total Harmonic Distortion: 0.05% 20 Hz - 20
kHz @ 8 Ohm 0.08% 20 Hz - 20 kHz @ 4 Ohm 0.15%
20 Hz - 20 kHz @ 2.7 Ohm Total Harmonic Distortion
(Bridged): 0.05% 20 Hz - 20 kHz @ 8 Ohm, 0.10%
20 Hz - 20 kHz @ 4 Ohm I.M. Distortion (SMPTE
4:1) @ 8 Ohm: 0.008% @ 1 watt 0.015% @ 75 watts
Power Consumption: 575 watts Signal to Noise
Ratio: -105 dB below rated BTU/HR: 1330 Input
Sensitivity: 0.700 volts for rated output (75 watts @
8 Ohm) Input Impedance: 47 K Ohm minimum
Power Requirement: 120 VAC, 50/60 Hz
Dimensions (W x H x D): 16-3/4" x 3-1/2" x 12-1/2"
(425mm x 89mm x 318mm)
2-Channel Amplifiers:
260MKII & 260MKII RMF
260x3MKII & 260x3MKII RMF
ASAP2 SAT & ASAP2 SAT RMF
ASAP1
Rated Power (20-20kHz) RMS: 60 Watts per
channel @ 8 ohms; 100 Watts per channel @
4 ohms. Total Harmonic Distortion: 0.05%
20Hz-20kHz @ 8 ohms, 0.09% 20Hz-20kHz @
4 ohms. I.M. Distortion (SMPTE4:1) @ 8
ohms: 0.008% @ 1 watt • 0.01% @ 60 watts.
Signal to Noise Ratio: -100dB below rated
output (A-weighted). Input Sensitivity: 0.625
volts for rated output. Input Impedance:
47kW Min. Power Requirement: 120 VAC,
50/60 Hz. Power Consumption: 500 watts
(625VA). BTU/HR: 750 Dimensions (W x H x D):
16-3/4" x 3-1/2" x 12-1/2" (425mm x 89mm x
318mm) Weight: 20 lbs (9.1 kg)
Features 3 pairs of terminals to connect and
switch output between 3 pairs of speakers.
Output Power, Stereo mode, RMS: 60 Watts
per channel @ 8 ohms; 100 Watts per channel
@ 4 ohms. Total Harmonic Distortion: 0.05%
20Hz-20kHz @ 8 ohms , 0.09% 20Hz-20kHz @
4 ohms I.M. Distortion (SMPTE4:1) @ 8
ohms: 0.008% @ 1 watt • 0.01% @ 60 watts
Signal to Noise Ratio: -100dB below rated
output (A-weighted) Input Sensitivity: 0.625
volts for rated output Input Impedance:
47kW Min Power Requirement: 120 VAC,
50/60 Hz Power Consumption: 500 watts
(625VA) BTU/HR: 750 Dimensions (W x H x D):
16-3/4" x 3-1/2" x 12-1/2" (425mm x 89mm x
318mm) Weight: 20 lbs (9.1 kg)
SAT Module Bay for Application Flexibility and
Future Upgradability. Output Power, Stereo
mode, RMS: 50 Watts per channel @ 8 ohms; 65
Watts per channel @ 4 ohms Total Harmonic
Distortion: 0.2% 20Hz-20kHz @ 8 ohms; 1%
20Hz-20kHz @ 4 ohms B to A Delay: 3 seconds
to 90 seconds (adjustable) Protection Circuits:
AC fuse, thermal, short circuit Signal to Noise
Ratio: -100dB below rated output (A-weighted)
Input Sensitivity: 300MV for 59W @ 8 ohms
Input Impedance: 47kW,Min. Power
Requirement: 120 VAC, 50/60 Hz Power
Consumption: 360 watts BTU/HR: 785
Dimensions (W x H x D): 13-1/2" x 1-3/4" x 4-3/4"
(343mm x 45mm x 121mm)
Weight: 12 lbs (5.45 kg)
Amplifier/switcher creates a mini two-source
system. Switches speaker-level audio. 20 W/ch
stereo amplifier at 8 Ohms.
Audio and video triggers. Inputs: Main system –
speaker-level; Local system – speaker/line level.
Sensitivity and delay adjustments. 3-stage detector
circuitry virtually eliminates false triggering. L & R
recessed, font panel volume controls.Hanger bracket:
Can be mounted virtually anywhere. Output Power,
Stereo Mode, RMS: 20 watts per channel @ 8 ohms
Total Harmonic Distortion: Less than 0.1%. I.M.
Distortion (SMPTE 4:1) @ 8Ohms: Less than 0.05%.
Power Consumption: 56 watts BTU/HR: 55 Signal to
Noise: -100dB below rated output. Input Sensitivity:
500 mv. Protection Circuitry: AC Fuse, thermal, short
circuit. Dimensions (W x H x D): 13-1/3” x 3” x 4-5/8”
(343mm x 76mm x 118mm). Weight: 7 lbs. (3.2 kg).
12-Channel Amplifiers:
Smart Amplifier Technology Modules:
1230 & 1230 RMF
1250MKII & 1250MKII RMF
AL1 SAT Module
ASL1 SAT Module
All Channels Driven Power Output: 30 Watts
per channel @ 8 ohms • 45 Watts per channel
@ 4 ohms Total Harmonic Distortion: 0.03%
20Hz-20kHz @ 8 ohms (30 WRMS) • 0.10%
20Hz-20kHz @ 4 ohms (45 WRMS) I.M.
Distortion (SMPTE 4:1) @ 8 ohms: 0.01% @
30 Watts Signal to Noise Ratio: -100dB below
rated output (A-weighted) Input Sensitivity:
700 millivolt for 30 watts RMS @ 8 ohms Input
Impedance: 20k Ohms Power Consumption:
1400 Watts, maximum 4 ohms full power
BTU/HR: 2732 Fuse: 10A AG Dimensions
(W x H x D): 16-3/4"x 5-5/8" x 14-1/4"
(425mm x 143mm x 362mm) Actual Weight:
38 lbs. (17KG)
All Channels Driven: Power Output:
50 Watts per ch, x12 @ 8 ohms • 75 Watts per
ch, x12 @ 4 ohms• 100 Watts per ch, x6 @ 8
ohms bridged Dynamic Headroom: +1.9dB,
x12 @ 8 ohms • +1.8dB, x12 @ 4 ohms • +3.5
dB, x6 @8 ohms bridged Total Harmonic
Distortion: 0.03% 20Hz-20kHz @ 8 ohms, 50
Watts • 0.06% 20Hz-20kHz @ 4 ohms, 75
Watts • THD less than 0.01% @ 1kHz 8 ohms,
50 Watts • THD less than 0.01% @ 1kHz 4
ohms, 75 Watts I.M. Distortion (SMPTE 4:1) @
8 ohms: 0.01% @ 50 Watts, 8 ohms Signal to
Noise Ratio: -100dB below rated output (“A”
weighted) Input Sensitivity: 700 millivolts for
50 Watts RMS @ 8 ohms Input Impedance:
20k Ohms Power Consumption: 1800 Watts
maximum @ 4 ohms, full power • 10 Watts,
standby BTU/HR: 2868 Fuse: 15A, MDA, 250V
Dimensions (W x H x D): 16-3/4" x 9-1/2" x
16-1/2" (425mm x 243mm x 420mm)
Actual Weight: 55 lbs (25 KG)
Auto-Switch-Audio (Line Level) SAT Module
Designed to allow automatic switching from a main
source to a remote source (e.g. main stereo system to
local TV) at line level. The device defaults to Source A
while monitoring Source B. When B is “on”, the
device switches to B until a signal is no longer
present. It then switches back to A. Quality Signal
Relay for Audio Switching
Detect Sensitivity: 6mv – 1v Control Output:
12VDC with short protection High pass filter
switch via jumpers on PCB (-3dB @27Hz) Status
LEDs for each input Frequency Response:
+/-0.25dB (20Hz-20kHz) Frequency Response
with High Pass Filter: 27-20kHz) A Input
Impedance: 42k Ohms B Input Impedance: 25k
Ohms Input Connector Removable Screw Type
Outputs: non-buffered gold plated RCA connectors.
Automatic Speaker/Line level Switching
SAT Module Designed to allow automatic
switching from a main source to a remote source
(e.g. main stereo system to local TV) at speaker
level. The device defaults to Source A while
monitoring Source B. When B is “on”, the device
switches to B until a signal is no longer present. It
then switches back to A. Quality Signal Relay for
Audio Switching.
Detect Sensitivity: 6mv – 1v
B to A delay time: 3 sec ~ 2.5 min. Control
Output: 12VDC with short protection High
pass filter switch via jumpers on PCB (-3dB
@27Hz) Frequency Response: +/-0.25dB
(20Hz-20kHz) Frequency Response with High
Pass Filter: 27-20kHz) B Input Impedance:
25k Ohms Input Connector: Removable
Screw Type Outputs: non-buffered gold
plated RCA connectors.
LR1 SAT Module
Balanced Audio Receiver SAT Module
The LR1 features a circuit that cancels out
noise on long line level audio runs over
balanced audio cable High pass filter switch
via jumpers on PCB (-3dB @27Hz) Frequency
Response: +/-0.25dB (20Hz-20kHz)
Frequency Response with High Pass Filter:
27-20kHz) Input Impedance: 12k Ohms
Input Connector: Removable Screw Type
Outputs: non-buffered gold plated RCA
connectors.
SONANCE •212 AVENIDA FABRICANTE • SAN CLEMENTE, CA 92672-7531 •TEL:800-582-7777• 949-492-7777• FAX:800-538-5151•949-361-5151
©2002
SONANCE. ALL RIGHTS RESERVED. SONAMP IS A REGISTERED TRADEMARK OF SONANCE
ALL OTHER TRADEMARKS ARE TRADEMARKS OF THEIR RESPECTIVE COMPANIES. ALL SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.
TAKE THE TOUR AT WWW. SONANCE . COM
33-2844