MOULDED POLYESTER ENCLOSURES MINIPOL SYSTEM
DISTRIBUTION BOXES
THE MINIPOL RANGE
The enclosures are in comformity with requirements of standard EN 50298.
SHOCKPROOF
Can take hits up to
20 Joules,
IK 10 according to
UNE-EN 50102
IEC 62262 standards
DEGREE OF PROTECTION
IP 66 according to
UNE 20324, EN 60529
IEC 62262 standards
SELF EXTINGUISHABLE
Does not feed the flames
Hot wire test: 960 °C according
to UNE-EN 60695-2-1/0
IEC 60695-2-10
standards
DOUBLE INSULATION
Protection from electric shock
according to UNE 60439-1
and IEC 60439-1 standards
Ui = 690 V
CORROSION-RESISTANT
Resistant to climatic-changes
and ultra-violet rays
Does not requir
any finishing
THERMIC CLASS
-50…+150 °C
E150°, according to UNE 21305
EN-HD 566S1 and IEC 60085
standards
EASY and FAST FITTING
No special tool is needed
HALOGENFREE
Does not issue toxic
gases
COLOUR
RAL 7035
NON-HYGROSCOPIC
Does not absorb damp or water
CERTIFICATES
UL, CSA, KEMA
LGAI - Laboratori General d’ Assaig i Investigacions
MOUNTING
POF
TF-MIP
STRUCTURE OF MINIPOL ENCLOSURES
- set of adjustable moulded brakets
(4 pcs)
- wall fixing set directly to the wall
with 4 pcs wall-plug
EASY TO MACHINE
Vertical patterns in the interior of the doors,
which enables the correct fitting of devices.
FP
CLOSING PLATES (U)
- pole mounting with bridle or band
SPECIALIZATION
It is possible to pre-machining by
request and to ask for personalized
colours. The colouring agent added
to the material before pressure.
COUPLING PIECES (UM)
EASY FITTING
FLEXIBILITY
Quick fixture guides in the back.
Permits fitting without drilling.
There are possible to fit horizontally
or vertically, obtaining a lot of combinations.
MODULAR MOUNTING PANEL
and INNER DOOR (CH)
Mounting panel and inner door
maintain IP 20 degree of protection
when the external door is open.
INNER DOOR (PI)
There is possible to fit devices
on the lockable inner door.
VARIOUS CLOSING SYSTEMS
All of the basic closing and locking
system provide that the locks can be
personalized to customer demand.
PROTECTIVE EDGE at the
BOTTOM and on TOP
Single-block body, with even walls
optimisin the space and resistance.
EXPLANATION OF THE TYPE-SYMBOLS
MIP = MINIPOL Product range
MIP-MS
M=
Height
(300, 400, 500, 600, 800)/3 = 300 mm, 4 = 400 mm etc.)
S=
Width
(250, 300, 40, 500, 600)/25 = 250 mm, 3 = 300 mm etc.)
Depth does not marked
at 300 mm height is 140 mm depth
at 400 mm and 500 mm height is 200 mm depth
at 600 mm heigth is 230 mm depth
at 800 mm height is 300 mm depth
/PT
Transparent door
For example: MIP-43/PT = an enclosure, 400 mm height, 300 mm width,
200 mm depth, with a tansparent door
Flat door (without marking)
/3P
Three point closing device, with 1 pc double bit DIN 3.0 mm,
with swing lock, with double winged handle
/EKDB Three point closing device, with swing door, with 1 pc double bit
DIN 3.0 mm, with swing lock, with sunke swinging handle
Double winged handle with simple lock bolt
/CH...
Modular mounting plate with different number of devices
BASIC TYPES
MIP-
Flat door
325
43
44
54
64
65
86
Transparent door
325/PT
43/PT
44/PT
54/PT
64/PT
65/PT
86/PT
43/3P
44/3P
54/3P
64/3P
65/3P
86/3P
43/PT/3P
44/PT/3P
54/PT/3P
64/PT/3P
65/PT/3P
86/PT/3P
Supplied with all the accessories enabling it to be fixed to a wall.
43/EKDB
44/EKDB
54/EKDB
64/EKDB
65/EKDB
86/EKDB
43/PT/EKDB
44/PT/EKDB
54/PT/EKDB
64/PT/EKDB
65/PT/EKDB
86/PT/EKDB
DIMENSIONS OF THE ENCLOSURES [mm]
MIP-325
MIP-43
MIP-44
MIP-54
MIP-64
MIP-65
MIP-86
A
300
400
400
500
600
600
800
B
250
300
400
400
400
500
600
C
140
200
200
200
230
230
300
D
276
370
370
470
570
570
770
E
212
262
362
362
362
462
562
E
35
52
52
52
52
52
52
F
75
80
90
90
90
90
90
DIMENSIONS OF TRANSPARENT DOORS [mm]
MIP-325
MIP-43
MIP-44
MIP-54
MIP-64
MIP-65
MIP-86
A
220
281
281
381
481
481
681
B
115
141
221
221
221
321
421
COUPLING PIECES
For vertical fitting
UM-420V - for 250 mm width
UM-430V - for 300 mm width
UM-440V - for 400 mm and more width
For horizontal fitting
UM-430H - for 300 mm height
UM-440H - for 400 mm and more height
CLOSING PLATES
U-402 - for 250 mm
U-403 - for 300 mm
U-404 - for 400 mm and 500 mm
F
120
180
180
180
210
210
280
G
110
170
170
170
200
200
270
ASSEMBLING POSSIBILITIES
Horizontal coupling pieces
UM-430H (2 pcs)
UM-440H (2 pcs)
UM-440H (2 pcs)
UM-440H (2 pcs)
UM-440H (2 pcs)
UM-420V
UM-430V UM-440V
UM-440V
UM-440V
Vertical coupling pieces
DIMENSIONS OF INNER DOORS [mm]
Type: PI
MIP-43
MIP-44
MIP-54
MIP-64
MIP-65
MIP-86
A
366
366
466
566
566
766
B
258
358
358
358
658
658
BASE PLATES
Polyester, PBP - (type of box)
- thickness: 4 mm
PBP
PBM
PBM-/B
Metal, coloured, PBM - (type of box)
- thickness: 2 mm
Metal, with surface treatment, PBM- /B (type of box)
- thickness: 2 mm
- colour: RAL 2000
Perforated mounting plate, PBR- (type of box)
(TELEQUICK)
- thickness: 2 mm
PBR
Fitting clips for PBR
Clip M4, Clip M5, Clip M6.
DIMENSIONS [mm]
PBP/325 ( for MIP-325)
PBP/43 ( for MIP-43)
PBP/44 ( for MIP-44)
PBP/54 ( for MIP-54)
PBP/64 ( for MIP-64)
PBP/65 ( for MIP-65)
PBP/86 ( for MIP-86)
A
268
358
358
458
558
558
754
B
213
260
360
360
360
460
556
C
248
338
338
438
538
538
734
D
175
222
322
322
322
422
518
Adjustable base plate kit (4 pcs)
For enclosures: MIP-325 MIP-43
Type of kit:
-
MIP-44
MIP-54
MIP-64
MIP-65
MIP-86
PDP-200 PDP-200 PDP-200 PDP-230 PDP-230 PDP-300
Adjustable and hinged base plate kit
For enclosures: MIP-325 MIP-43
Type of kit:
-
MIP-4
MIP-54
MIP-64 MIP-65 MIP-86
PGD-43 PGD-44 PGD-54 PGD-64 PGD-65 PGD-86
MODULAR CHASSIS OF DEVICE
CH - type chassis for installation of modular switchgear
- Assembly and wiring can install out of enclosure
- Installation can be found in the enclosure
- Mounting rails can be fitted in 7 different depths
- The sunk base plates allow to use non-modular devices too.
PARTS OF CHASSIS
- Side frame (1)
- DIN rail for modular devices (2)
- Holder for rail or plates (3)
- Holder for mounting plates (4)
- Front plate / cover plate (5) Type-symbol: CC
- Base plate (6) Type-symbol: PB
Example: CH 69/3: Number of moduls 3×23 in 3 lines, 23 moduls by lines.
In case of opened door the front plates provide IP 2X degree of protection too.
The different arrangements can be formed according to space requirement of cables and
devices.
ARRANGEMENTS OF THE FRONT PLATES
SETTING-IN OF THE CHASSIS IN MIP TYPES
For
MIP-43
enclosures: /CH24/2
MIP-44 MIP-54
/CH36/2 /CH54/3
MIP-64 MIP-65
MIP-86
/CH54/3 /CH69/3 /CH116/4
Chassis:
CH36
CH54
CH54
CH69
CH116
CH24
Number of
modules:
24
36
54
54
69
116
Number of
lines:
2x12
2x18
3x18
3x18
3x23
4x29
SETTING-IN OF THE FRONT AND BASE PLATES IN THE CHASSIS
F
R
O
N
T
P
L
A
T
E
S
B
A
S
E
P
L
A
T
E
S
300 mm
width
for enclousures
400 mm
width
500 mm
width
600 mm
width
CC-500/
202
CC-600/
202
for 202 mm
hight
CC-400/
202
CC-400/
202
CC-400/
202
for 178 mm CC-300/
hight
178
CC-400/
178
CC-400/
178
CC-400/
178
for 152 mm
hight
CC-400/
152
CC-400/
152
CC-400/
152
CC-500/
152
CC-600/
152
for 202 mm
hight
PB-400/
202
PB-400/
202
PB-400/
202
PB-500/
202
PB-600/
202
for 178 mm PB-300/
hight
178
PB-400/
178
PB-400/
178
PB-400/
178
for 152 mm
hight
PB-400/
152
PB-400/
152
PB-400/
152
CC-600/
178
PB-600/
178
PB-500/
152
PB-600/
152
OTHER ACCESSORIES
LOCKS
1 PDB - DIN 3.0 lock with double bit
EKD - double handle
2 LLT - triangular key
PTT - lock with triangular head, 11 mm
3 PCM
- double handle with key lock
PCM/3P - double handle with key lock, three point close
4 EC -stainless steel padlock
5 PCC - stainless steel padlock
6 EKDB - sunk handle for different locks
CPI-DE - swing lock for inner doors
CPL-LL - key lock for inner doors
DP - outlet of condensation water
DVG - ventillation device
APPLICATIONS
A system of enclosures made of hot moulded fibreglass reinforced polyester (GRP) with a high
pressure technology. They are halogen free.
The enclosures of the MINIPOL System is a multipurposly usable product-family. Enclosures are
mountable on wall, on console and on the pick of pole.
High degree of protection (IP 66) meets the requirement of outdoor application. They can be used
in all kids of communication, electrical, pneumatical and hydraulical installation.
Rated insulation voltage of the enclosures is 690 V 50 Hz.
The base is made in one piece, garanteeing optimal avaibililty in the interior and increasing the
impact resistance. They offer optimal security for humans and animals because of the double
insulation characteristics.
The enclosures are available with flat or transparent doors in 7 different size from 300×250×140
mm up to 800×600×300 mm. They are symmetrical and reversible in many cases. The wide range
of accessories gives an extra using possibility to the MINIPOL range.