8
7
6
5
4
3
2
1
REVISIONS - ALL SHEETS SAME REVISION STATUS
ZONE
NOTES:
1.
2.
3
RECOMMENDED SCREW MOUNTING TORQUE: 16 - 20 IN-OZ.
4.
-
RELEASED BY DOCUMENT CENTER
FOR ONLINE VIEWING
WHEN RE-INSERTING CAP, PRESS CAP IN UNTIL CAP SNAPS INTO PLACE.
DESCRIPTION
DATE (YYYY-MM-DD)
RELEASE FROM XB W/O CHANGES
ERR 114654
2012-01-17
APPROVED
CA
CHECK REVISION IF PRINTED
SWITCH ASSEMBLY SHALL BE MARKED WITH THE FOLLOWING:
A)
B)
C)
D)
E)
F)
D
LTR
D
"KORRY"
SOURCE CODE
DATE CODE
KORRY SWITCH ASSEMBLY PART NUMBER
THE WORD "TOP" APPROX. AS SHOWN
NVIS TYPE, CLASS (IF APPLICABLE)
SWITCH ACTION:
ALT - ALTERNATE: WHEN ACTUATED BY DEPRESSING CAP, SWITCH
CONTACTS ARE MAINTAINED UNTIL ACTUATED AGAIN. I.E. EACH
ACTUATION REVERSES THE POSITIONS OF THE CONTACTS.
MOM - MOMENTARY ACTION: WHEN ACTUATED BY DEPRESSING CAP, SWITCH
CONTACTS ARE MAINTAINED UNTIL CAP IS RELEASED.
IND - INDICATOR: NO SWITCHING
5.
C
SWITCH CONTACT RATING:
VOLTAGE: 28 VDC
SEA LEVEL
50,000 FEET
RESISTIVE
8 A
4 A
INDUCTIVE
4 A
2.5 A
LAMP
2.5 A
2.5 A
6
VISIBLE LEGEND AREA REFERENCE ONLY.
7.
SWITCH TERMINALS
SWITCH ASSY
ACCEPT CRIMP SOCKET M39029/22-192.
- SOCKET P/N M39029/22-192, NOT FURNISHED BY KORRY, MAY BE CRIMPED TO A
USING CRIMPING TOOL P/N M22520/7-01 AND POSITIONER M22520/7-20.
20, 22, OR 24 GAGE WIRE.
- USE TOOL P/N M81969/14-10, NOT FURNISHED BY KORRY, TO INSERT OR REMOVE
- USE TOOL P/N M22885/108T8234, NOT FURNISHED BY KORRY, FOR REMOVING
B
SOCKETS INTO/FROM CONNECTOR MODULE ASSEMBLY.
CONNECTOR MODULE FROM SWITCH.
MOUNTING PANEL
8.
MAXIMUM DISPLAY INPUT CURRENT AT 28 VDC: 68 mA
9
RESISTORS R21-R24 MAY BE REMOVED FOR SPLIT, 3-WAY, AND 4-WAY CONFIGURATION
10
VR5-VR8 MAY BE REMOVED TO SUPPORT 2G2 LIGHTING. DIM RESISTORS (R9-R12)
11
MOUNTING SLEEVE RANGE:
SEE TABLE 1.
WILL ALSO NEED TO BE SET FOR 2G2. SEE TABLE 2.
C
CONNECTOR ASSY
TABULATION
A
MOUNTING PANEL RANGE
A
.032" TO .132"
B
.132" TO .232"
C
.232" TO .332"
D
.332" TO .432"
NOTICE - FREEDOM OF INFORMATION ACT (5 USC 552)
AND DISCLOSURE OF CONFIDENTIAL INFORMATION GENERALLY (18 USC 1905)
This document contains Korry proprietary information that is exempt from disclosure under the Freedom of
Information Act, 5 USC 552(b)(4), and contains information that is prohibited from disclosure by the Trade Secrets
Act, 18 USC 1905.
7
FOR REF ONLY
SEE SEPARATE PARTS LIST
A
Proprietary Notice: This document and all information and expression contained herein are the property of Korry
Electronics Co. This document contains trade secrets protected by the Uniform Trade Secrets Act and the
Economic Espionage Act of 1996, 18 USC 1831, et. seq., which are disclosed to you in confidence. Neither
this document nor the trade secrets disclosed herein may be used, reproduced or disclosed (in whole or in part)
by you for any purpose without the prior written permission of Korry Electronics Co.
8
B
MOUNTING SLEEVE
D
SLOT
C
UNLESS OTHERWISE
SPECIFIED, DIMENSIONS
ARE IN INCHES
B
TOLERANCES ON
2 PLACE
3 PLACE
+
_ .01
+
_
.005
CONTRACT NUMBER
THIRD ANGLE
PROJECTION
ANGLES
+
_ 2.0
INTERPRET DIM AND TOL
PER ASME Y14.5M-1994
NOTICE: This document contains technical data subject to U.S. export controls. Based on jurisdictional analysis
and classification/category analysis _CAT 389______:
This technical data is:
This technical data defines or pertains to a product that is:
Subject to: EAR ECCN:EAR99
Subject to: EAR ECCN:EAR99
.
This analysis is provided to assist recipients of this document in compliance with U.S. Export Laws and Regulations.
.
6
5
4
INTERPRET DRAWING PER
ASME Y14.100-2004
NO CHANGES MAY BE MADE TO THIS
DRAWING EXCEPT BY NATIVE CAD
TOOL INPUT TO THE CAD FILE
3
CONTRACTOR
A
TITLE
DRAWN BY
P. NGUYEN
ENGINEER
P. SANTIAGO
DATE (YYYY-MM-DD)
2010-02-26
DATE (YYYY-MM-DD)
389 LED SWITCH ASSEMBLY
2010-02-26
SIZE
SEE RELEASE RECORD FOR
APPROVALS
SEE SEPARATE APPLICATION LIST
D 81590
SCALE
2
CAGE CODE
NONE
REV
DRAWING NO
44258
SHEET
1
1 OF 4
il_qr26_d_ear99.frm
08/10
8
7
6
(
5
4
3
2
1
D
.753)
D
(2.200)
(
(2X .570)
(TOP)
.570)
5X LAMP TERMINAL
IDENTIFICATION
.140 MAX
(TOP)
(2X .255)
(
(
.640)
.680)
FULL DISPLAY
HORIZONTAL SPLIT DISPLAY
A, B, C, D, F
C
"TOP" MARKED ON OPPOSITE SIDE
FOR VERTICAL SPLIT DISPLAY
3-WAY DISPLAY WITH TOP SPLIT
5X LAMP TERMINAL
IDENTIFICATION
(2.300)
(TOP)
(TOP)
CONNECTOR ASSY
(.255)
(2X
12X SWITCH TERMINAL
IDENTIFICATION
VIEW SHOWN WITHOUT MOUNTING HARDWARE
(.570)
C
(4X
.255)
.255)
B
B
3-WAY DISPLAY
BOTTOM SPLIT
4-WAY DISPLAY
12X SWITCH TERMINAL
IDENTIFICATION
MOUNTING SLEEVE
(TOP)
(2X .255)
(TOP)
VIEW SHOWN WITH MOUNTING HARDWARE
(2X
.255)
(2X .570)
(.255)
A
A
FIGURE 1: SWITCH ASSEMBLY
VERTICAL SPLIT DISPLAY
(.570)
NOTICE
Use or disclosure of information on this
sheet is subject to the restrictions on
the first sheet of this document
3-WAY DISPLAY
TOP SPLIT
8
7
6
5
4
3
2
SIZE
CAGE CODE
D 81590
SCALE
NONE
REV
DRAWING NO
44258
SHEET
1
2
il_qr26_d_ear99.frm
08/10
8
7
6
5
4
3
2
1
D
14
D
16
15
11
12
13
TABLE 1
LAMP CIRCUIT FIGURE
CCA CONFIGURATION
ZERO OHM JUMPERS
RESISTORS TO BE KEPT
ZERO OHM JUMPERS
RESISTORS TO BE REMOVED
3
FULL
R21-R24
N/A
3A
HORIZONTAL SPLIT
R21, R22
R23, R24
R23, R24
R21, R22
R21
R22- R24
R22
R21, R23, R24
N/A
R21-R24
8
9
10
3B
5
3C
7
C
6
3D
VERTICAL SPLIT
3-WAY
(TOP HALF, BOTTOM QUARTER)
3-WAY
(TOP QUARTER, BOTTOM HALF)
3E
FIGURE 2: SWITCH CIRCUIT DIAGRAM
4-WAY
C
2X .760 MIN
4X
.690
TABLE 2
B
2X .760 MIN
16X R.025
2G2 QUADRANT
ZENER DIODE
TO REMOVE
DIM RESISTOR TO BE REPLACED WITH
SMR0603T1002F (10K )
TOP RIGHT
VR5
R9
TOP LEFT
VR6
R10
BOTTOM RIGHT
VR7
R11
BOTTOM LEFT
VR8
R12
B
RECOMMENDED PANEL CUTOUT
A
A
NOTICE
Use or disclosure of information on this
sheet is subject to the restrictions on
the first sheet of this document
8
7
6
5
4
3
2
SIZE
CAGE CODE
D 81590
SCALE
NONE
REV
DRAWING NO
44258
SHEET
1
3
il_qr26_d_ear99.frm
08/10
8
7
6
5
4
3
2
1
LED'S
LED'S
D
D
FULL DISPLAY A
A, B, 2, 3
REGULATION,
SPIKE AND
SURGE
PROTECTION
FULL DISPLAY
COMMON
REGULATION, SPIKE
REGULATION, SPIKE
AND SURGE PROTECTION
AND SURGE PROTECTION
LED'S
TOP DISPLAY
A,B
LED'S
REGULATION, SPIKE
AND SURGE PROTECTION
1
DISPLAY COMMON
1
LEFT DISPLAY
FIGURE 3: FULL DISPLAY
(BIPOLAR)
REGULATION, SPIKE
B,3
DISPLAY COMMON
LED'S
1
AND SURGE PROTECTION
BOTTOM DISPLAY
C
2,3
RIGHT DISPLAY
FIGURE 3A: HORIZONTAL SPLIT DISPLAY
(BIPOLAR)
REGULATION,
SPIKE AND
SURGE PROTECTION
LED'S
BOTTOM DISPLAY
LED'S
A
LED'S
REGULATION,
SPIKE AND
SURGE PROTECTION
REGULATION,
SPIKE AND
SURGE PROTECTION
TOP LEFT DISPLAY
LED'S
REGULATION,
SPIKE AND
SURGE
PROTECTION
REGULATION,
SPIKE AND
SURGE
PROTECTION
LED'S
B
TOP RIGHT DISPLAY
1 DISPLAY
COMMON
B
LED'S
LED'S
TOP RIGHT
A DISPLAY
1
2,3
B
C
FIGURE 3B: VERTICAL SPLIT DISPLAY
(BIPOLAR)
TOP LEFT
DISPLAY B
DISPLAY COMMON
A,2
REGULATION,
SPIKE AND
SURGE PROTECTION
REGULATION,
SPIKE AND
SURGE PROTECTION
REGULATION,
SPIKE AND
SURGE
PROTECTION
REGULATION,
SPIKE AND
SURGE
PROTECTION
LED'S
LED'S
BOTTOM LEFT DISPLAY 3
TOP DISPLAY
A, B
DISPLAY COMMON
REGULATION,
SPIKE AND
SURGE PROTECTION
1
BOTTOM RIGHT DISPLAY
A
2
BOTTOM LEFT 3
DISPLAY
LED'S
FIGURE 3E: 4-WAY DISPLAY
(BIPOLAR)
2
NOTICE
Use or disclosure of information on this
sheet is subject to the restrictions on
the first sheet of this document
7
A
FIGURE 3D: 3-WAY DISPLAY
(BIPOLAR, TOP QUARTER, BOTTOM HALF)
FIGURE 3C: 3-WAY DISPLAY
(BIPOLAR, TOP HALF, BOTTOM QUARTER)
8
BOTTOM RIGHT
DISPLAY
6
5
4
3
2
SIZE
CAGE CODE
D 81590
SCALE
NONE
REV
DRAWING NO
44258
SHEET
1
4
il_qr26_d_ear99.frm
08/10