Detailed Specifications &
Technical Data Sheet
Cat6A UTP NV Patch Cords
For more information
please call 1-800Belden1
DESCRIPTION:
The Cat6A UTP NV Patch Cord conforms to ANSI/TIA/EIA-568-B.2-10, ISO/IEC 11801 2.1 edition and CENELEC
EN50173 (200x) standards for Category 6A/CLASS E A with enhanced transmission properties, supporting 10GBase-T and
all other high bandwidth digital applications with low BER up to 500 MHZ bandwidth. Comprised of flexible jumper cable
and terminating with two modular plugs.
Cat6A U/FTP NV Cord Cable
The Cat6A U/FTP NV Cord Cable is a 100 ohm cable contains 4 Un-grounded Foiled Twisted Pairs (U/FTP), cabled and
jacketed with a LSZH compound. An additional 26 AWG flexible, insulated conductor at the center of the cable serves as a
control wire, which carries the NetView scanning signal. In this way, scanning does not interfere with the data signalcarrying pairs.
Cat6A UTP Modular Plug
The Cat6A Plug is field-terminable, with superior cable retention providing enhanced pull-strength and preventing pair
deformation. The plug is designed to ensure precision wire placement, providing superior performance.
With Precession Placement Technology (PPT), the Cat6A Plug ensures high-repeatability Cross-Talk performance, with
both factory and field termination. PPT enables Category 6A performance under any field condition.
The connectors have 9 contacts, and accommodate termination of 24 AWG stranded and 26 AWG solid and stranded
conductors. In addition, there is a 9th contact for NV application which can accommodate the 26 AWG stranded wire.
FEATURES:
NV Copper patch cords are used in cross-connect NetView applications
Comprise a length of nine-wire flexible jumper cable, terminated with two ten-position RJ-45 plugs at the ends with
external nine-contact
Accommodate with either internal or external nine-pin connection
NV Copper Patch Cords feature non-molded flexible boot for enhanced life and reliability
1 © Belden Inc., 2015
Detailed Specifications &
Technical Data Sheet
Anti-snag latch design
100% tested at the factory
SPECIFICATION:
Cat6A U/FTP NV Cord Cable
Construction
Conductor
Insulation
Pair Construction
Individual Shield
Pair Color Codes
Overall Diameter
Outer Sheath
Control Wire
Conductor
Insulation
Cat6A U/FTP NV Cord Cable
Eight wires, bare stranded copper, 7 X 0.16 mm (26 AWG)
skin foam skin, polyolefin
Four pairs
polyester-aluminum foil (metal face inside), eliminating alien cross-talk
(2 wires/pair)
Blue/white, orange/white, green/white, brown/white
6.0mm nominal
Low Smoke, Zero Halogen (LSZH) compound, colored light gray RAL 7032
with black printing
one wire, stranded bare copper, 7 x 0.16 mm (26 AWG)
solid polyolefin, 0.78±0.02mm outer diameter, colored red
DIMENSIONS AND WEIGHT:
Weight
43kg/km, nominal
MECHANICAL SPECIFICATION:
Storage Temperature
Operating Temperature
-30°C to 70°C
-5°C to 50°C
ELECTRICAL SPECIFICATION:
DC Resistance
Resistance Unbalance
Mutual Capacitance
Capacitance Unbalance
Impedance
Voltage Rating
Dielectric Strength
Transfer Impedance (Zt) (Shielding
Effectiveness)
Velocity of Propagation
Propagation Delay
Propagation Delay Skew
Max. 145ohm/km at 20°C
2% max. at 20°C.
43 pF/m nominal at 1 KHz.
1500 pF/km max. at 1 KHz (wire to ground).
100 ±15 ohm at 1 to 250MHz
30 V rms
700 VAC/one minute min (wire to wire)
5 m ohm/m max. at 1-30 MHz.
77-80% nominal
5.0 nS/m max @ 500 MHz
25 nS/100 m max @ 1-500 MHz
STP MODULAR PLUGS:
Plug Housing
Contacts
Plating
Current/Voltage Rating
Dielectric Withstanding
2 © Belden Inc., 2015
PC Resin UL-94V0
High grade copper alloy
50 micro inch (1.27 micrometer) gold
1.5 Amps, 30 VAC / 56 VDC
1000 volts RMS, 1 min. (60Hz)
Detailed Specifications &
Technical Data Sheet
Insulation Resistance
500 Megaohms
APPLICABLE STANDARD:
Telecommunications Standards
Flammability Test
Other standard
Conform to ANSI/TIA/EIA-568-B.2-10
IEC 332-1 / UL 1581 VW-1
ISO/IEC 11801 2.1 edition and CENELEC EN50173 (200x) standards for
Category 6A/CLASS EA
STANDARD PART NUMBER:
Number
Description
N3269200
Cat6A UTP NV Patch Cord, 2.0m
N3269300
Cat6A UTP NV Patch Cord, 3.0m
N3269500
Cat6A UTP NV Patch Cord, 5.0m
N3269700
Cat6A UTP NV Patch Cord, 7.0m
N4530100
Cat6A UTP NV Patch Cord, 10.0m
Revision Number: 1
Revision Date: 22/4/2015
_____________________________________________________________________________________
©Copyright 2015 Belden, Inc
All Rights Reserved.
Although Belden ("Belden") makes every reasonable effort to ensure their accuracy at the time of this publication,
information and specifications described herein are subject to error or omission and to change without notice, and the listing
of such information and specifications does not ensure product availability.
Belden provides the information and specifications herein on an "AS IS" basis, with no representations or warranties,
whether express, statutory or implied. In no event will Belden be liable for any damages (including consequential, indirect,
incidental, special, punitive, or exemplary damages) whatsoever, even if Belden has been advised of the possibility of such
damages, whether in an action under contract, negligence or any other theory, arising out of or in connection with the use, or
inability to use, the information or specifications described herein.
All sales of Belden products are subject to Belden's standard terms and conditions of sale.
Belden believes this product to be in compliance with the following environmental regulations: California Proposition 65
Consent Judgment For Wire & amp; Cable Mfgs.(San Francisco Superior Court Nos. 312962 And 320342); EU RoHS
(Directive 2002/95/EC, 27-Jan2003); Material manufactured prior to the compliance date may still be in stock at Belden
facilities and in our Distributor's inventory. EU ELV (Directive 2000/53/EC, 18-Sept-2000); EU WEEE (Directive
2002/96/EC, 27-Jan-2003); And EU BFR (Directive 2003/11/EC, 6-Feb2003). The information provided in this Product
Disclosure, and the identification of materials listed as reportable or restricted within the Product Disclosure, is correct to the
best of Belden's knowledge, information and belief at the date of its publication. The information provided in the Product
Disclosure is designed only as a general guide for the safe handling, storage, and any other operation of the product itself or
the one that it becomes a part of. This Product Disclosure is not to be considered a warranty or quality specification.
Regulatory information is for guidance purposes only. Product users are responsible for determining the applicability of
legislation and regulations based on their individual usage of the product.
Belden declares this product to be in compliance with EU LVD (Low Voltage Directive 73/23/EEC), as amended by
directive 93/68/EEC.
3 © Belden Inc., 2015