Distributed by Titan Tool
AIR ASSISTED AIRLESS & PRESSURE-REDUCED GUNS
PRESSURE-REDUCED GUNS
Cat-X
14:1 Air Assist Airless Pump
PK-OC14-C5
For production fine finish spraying of wood and other fine finish
applications. The air motor incorporates a unique magnetic
“no stall” valve design. This simple direct acting valve is also
resistant to icing, has a long life carbon fiber cylinder and
integrated noise suppression design for quiet operation.
Non-contact pump tube never wears out
Cartridge-style piston seal for quick field replacement
Large capacity solvent cup
360° fluid inlet/outlet orientation
EP-CAT-X-M-W
The CAT-X is C.A.Technologies new professional grade fine finish
spray gun. Providing extreme atomization, handle ergonomics and
fluid delivery superior to all the competitive guns on the market
today, the CAT-X will exceed all your finishing needs. Model
anodized in a marble red pattern.
SPECIFICATIONS
Air Inlet: 1/4" NPS (m)
Fluid Inlet: 16m x 1.5
Weight: 20 oz.
Cat-X Pack includes:
Cat-X Gun with Aluminum Gravity Cup,
4 Needle/Nozzle Setups, 2 Air Caps,
Aluminum Cup, Tools and Case
Only available in the CAT-X Pack.
DESCRIPTION
PART NO.
Repair Kit
10-161
PPS Adapter
91-476
™
SPECIFICATIONS
Pump Ratio: 14:1
Max. Fluid Pressure: 1500 PSI
Max. Air Pressure: 107 PSI
Fluid Volume: 1/3 GPM (Supports 1 gun up to 0.024 orifice size)
All outfits include 25-foot air and fluid hose, pump, gun and tip.
DESCRIPTION
PART NO.
Repair Kit for Fluid Section
10-117
Repair Kit for Air Motor
10-163
Cougar AAA Gun
CPR C.A.T. Pressure Reduced
C411
The CPR spray guns from C.A.T. combines the transfer efficiency of
HVLP with the speed and finish quality of conventional air spray.
The nozzle requires 11 CFM at 29 PSI recommended inlet pressure.
This fine finish gun is built
for production wood or metal
fine finish spraying.
Stainless steel fluid passages
Ergonomic design
Integrated fluid filter and easy trigger pull
SPECIFICATIONS
Air Inlet: 1/4" NPS (m)
Fluid Inlet: 3/8" NPS (m)
Weight: 20 oz.
AAA ACCESSORIES
Hose Wrap (Comes in any length)
5-Gallon Cover Mount Agitator
2
C.A. Technologies
CPR-303R2
PART NO.
91-51
Only available in the CPR Pack.
54-405-BA
| Distributed by titantool.com
DESCRIPTION
CPR Pack includes:
CPR Pressure Reduced Gun, 3 Needle/
Nozzle Setups, 2 Air Caps, Aluminum
Cup (51-303R2) with Regulator, Tools
and Case
PART NO.
Repair Kit
10-106
PPS™ Adapter
91-475
HVLP GUNS
HVLP GUNS
Deluxe Techline Jr. (TJR)
FE-Line (LCFM) Fine Finish
TJR
This kit is intended to give finishers the best of both worlds by
including the regular air cap for all your touch-up needs and the
special round air cap specifically designed for shading and other
specialty applications.
Includes 1.0, 1.2 and 1.3 needle and nozzle setups
Fluid Inlet: 16 mm x 1.0 mm (m)
Weight: 15 oz.
Requires 6 CFM
CAT Pack includes:
Deluxe Techline Jr. Gun, 3 Needle/
Nozzle Setups (1.0, 1.2 and 1.3),
2 Air Caps, 450 mL Plastic Cup,
450 mL Aluminum Cup, Tools and Case.
SPECIFICATIONS
Air Inlet: 1/4" NPS (m)
Fluid Inlet: 3/8" NPS (m)
Weight: 15 oz.
Standard Nozzle Setup:
1.3 x 1090, requires 6 CFM
Only available in the TJR Pack.
DESCRIPTION
PART NO.
Repair Kit
60-TJR-10
Repair Kit (Spacer for TJR)
60-TJR-11
PPS™ Adapter
91-473
Jaguar 100 HVLP
The new FE-Line LCFM HVLP gun is our low CFM lightweight
ergonomic spray gun. Its standard setup is designed for use with a
low air consumption compressor. The 1090 air cap only uses 6 CFM,
which enables the gun to be operated with a 2.0 HP compressor.
Lightweight ergonomic design reduces fatigue
and increases mobility
SPECIFICATIONS
Air Inlet: 1/4" NPS (m)
CP-FELCFM
Smart Pack includes:
FE-Line Fine Finish Gun, 3 Needle/
Nozzle Setups (1.0, 1.3 and 1.7),
2 Air Caps, 1 Quart Cup with Regulator,
Tools and Case.
Only available in our Smart Pack.
DESCRIPTION
PART NO.
Repair Kit
10-140
Gasket
51-320
FE-Line Gun Smart Pack
EP-J100H-W
CP-FELCFM
PPS™ Adapter
91-475
This general purpose gravity-fed gun is intended for automotive and
wood finishing. Comes standard with an aluminum gravity cup. This
gun complies with all HVLP environmental regulations.
Stainless steel fluid passages
Low volume nozzles for small HP compressor use
Self-adjusting needle packing
SPECIFICATIONS
Air Inlet: 1/4" NPS (m)
Fluid Inlet: 16 m x 1.5
Weight: 25 oz.
Standard Nozzle Setup:
1.4 x 1093, requires 10 CFM
CAT Pack includes:
Jaguar 100 HVLP Gun, 4 Needle/
Nozzle Setups, 2 Air Caps, Aluminum
Cup and Tools
Jaguar 100
CAT Pack
Only available in the CAT Pack.
DESCRIPTION
PART NO.
Repair Kit
10-105
PPS Adapter
91-476
™
Jaguar 100
HVLP Gun
C.A. Technologies | Distributed by titantool.com
3
CONVENTIONAL AIR SPRAY GUNS
CONVENTIONAL
“The Laminator”
Tomcat 100C
Panther 200Z (Zinc Rich)
EP-T100C
The T100C is an economical general purpose conventional air spray
gun for spraying a wide range of coatings. Designed for production
use, the Tomcat is perfect for all coatings from thin to thick, stains
to glue. Can also be used with internal mix nozzles as well as
carbide tipped fluid nozzles for abrasives.
Self-adjusting needle packing
Inexpensive nozzle replacement
Rugged construction
The P200Z is a rugged, general purpose, conventional air spray
gun designed for spraying zinc-rich coatings. It has a Delrin tipped
fluid nozzle to prevent plating and a unique leather/Teflon® packing
arrangement that increases your spraying time before the gun
needs to be cleaned. The body and air cap are Teflon® anodized
to aid in clean-up and extend the life of the gun. This gun comes
standard with air-adjusting valve, stainless steel fluid passages and
heavy-duty needle return spring.
Panther Gun “The Laminator”
SPECIFICATIONS
Air Inlet: 1/4" NPS (m)
Weight: 19 oz.
Standard Pressure Setup: 1.2 x 2263, requires 14 CFM
Stainless steel fluid passages
Inexpensive nozzle replacement
Self-adjusting needle packings
Standard Siphon Setup: 1.8 x 2266, requires 12 CFM
Pressure and siphon setups available.
DESCRIPTION
PART NO.
Repair Kit
10-112
Tomcat 100C 2.2
T100C-22-2167
Tomcat 100C 2.8
T100C-18-28-2168
Tomcat 100C with Cup (Includes 1.3, 1.5 and 1.8mm nozzles)
EP-T100C-CUP
Gasket
51-321
PPS™ Adapter
91-475
SPECIFICATIONS
Air Inlet: 1/4" NPS (m)
Fluid Inlet: 3/8" NPS (m)
Weight: 20 oz.
Standard Nozzle Setup: 1.8 x 2266-3T, requires 16.2 CFM
(other nozzles available)
DESCRIPTION
Repair Kit
C.A. Technologies
P100G-18-2266-3T
“The Laminator” is a general purpose conventional air spray gun
designed for glue/adhesive applications of all types. The body and
air cap are Teflon® anodized for easy clean-up and longer life.
Fluid Inlet: 3/8" NPS (m)
4
P200Z
| Distributed by titantool.com
PART NO.
10-110
PRESSURE TANKS
2.5 Gallon Disposable Tank Liners
51-504
51-214
Our new semi-rigid liners for the 51-200 series
2.5 gallon tanks are disposable and formed from
solvent resistant durable, anti-static high-density
polyethylene. These liners make clean-up and color
changes fast and easy with minimal solvent use.
DESCRIPTION
51-202
These pots are constructed of heavy gage steel. The tank has
wheels for maneuverability or optional stationary feet.
Inside dimensions: 10.5" diameter x 8 ¾" depth
Bottom outlet tanks have 3/4" outlet with ball valve
TANKS
REGULATORS
AGITATOR
GASKET
PART NO.
2
None
51-220
51-202
Standard
Standard
2
Hand
51-220
51-202H
Standard
2
Air
51-220
51-204
Bottom Outlet
2
None
51-220
51-212
Bottom Outlet
2
Air
51-220
51-214
Pack of 60
51-261-60
51-130
Simple in design and versatile in operation, this
economically priced pressure cup is tough enough
to hold up to daily industrial and automotive
operation and is designed for easy use and
cleaning. Comes with a convenient carrying
handle and easy open screw lid. This unit has a
bypass regulator and gauge.
Maximum Working Pressure: 50 PSI (0.34 MPa)
DESCRIPTION
Regulator for Techline 2-Quart Pressure Cup
These pots are constructed of heavy gage steel. They come
standard with dual fluid outlets and ball valves. Wheels make this
tank maneuverable or they may be fitted with stationary feet. Tanks
also come with a fill port for easy loading.
Inside dimensions: 12 ½" diameter x 15 ½" depth
Bottom outlet tanks have 3/4" outlet with ball valve
Maximum Working Pressure: 80 PSI (0.55 MPa)
PART NO.
51-150
Pressure Tank Parts
DESCRIPTION
5 Gallon Pressure Tanks
TANKS
51-261-12
Techline 2-Quart Pressure Cup
2.5 Gallon Pressure Tanks
PART NO.
Pack of 12
PART NO.
Gasket for 51-130
51-140
Gasket for 51-303
51-320
Gasket for 51-301
51-321
Gasket for 51-202, 51-202SS, 51-203, 51-204
51-220
Gasket for 51-502SS, 51-504SS
51-520
Vent Valve
51-234
Safety Relief Valve Assembly
51-229
Air Flow Diffuser
51-237
Inlet Screen
51-248
Propeller (For agitated tanks)
51-246
REGULATORS
AGITATOR
GASKET
PART NO.
Standard
2
Hand
51-520
51-502
Chevron Packings (For agitated tanks)
51-289
Standard
2
Air
51-520
51-504
Regulator for 51-202
52-11A
Bottom Outlet
2
None
51-520
51-512
Bottom Outlet
2
Air
51-520
51-515
Pressure Tank Kits
Kits include gun, hose and tank.
GASKET
PART NO.
Tomcat Gun with 51-130 2 Qt. Cup and Hose
DESCRIPTION
51-140
EP-T100C-130
FE-Line HVLP with 51-130 2 Qt. Cup and Hose
51-140
CP-FELCFM-130
FE-Line HVLP with 2.5 Gallon Pressure Pot
and 25' Hose Outfit
51-220
CP-FELCFM-202
Tomcat Gun with 2.5 Gallon Pressure Pot
and 25' Hose Outfit
51-220
EP-T100C-202
Mini Gun Regulator
52-300
A true regulator with built-in air diaphragm allows the user to
accurately regulate pressure. Comes with glass face lens, 160 lb.
gauge and lightweight composite body.
Air Metering Valve
52-31
C.A. Technologies | Distributed by titantool.com
5
NEEDLE NOZZLE KITS, AIR CAPS AND TIPS
HVLP - 100 Series HVLP Air Caps for 100H (General Industrial)
CFM
FLUID TIP RANGE
TYPICAL MATERIALS
GUN
PART NO.
Pressure
DESCRIPTION
6
HVLP Air Caps
Low CFM. Ideal for small compressors.
Lynx, Jaguar
21-1090
Pressure
10
HVLP Air Caps
Low CFM. General industrial and wood finishing.
Lynx, Jaguar
21-1093
100 Series Conventional Air Caps for 100C
DESCRIPTION
CFM
FLUID TIP RANGE
TYPICAL MATERIALS
GUN
PART NO.
12
0.6 – 1.8
Medium, general purpose, enamals and lacquers.
Lynx, Tomcat, Jaguar
21-2266
Pressure
14
0.6 – 1.8
Medium, general purpose, enamals and lacquers.
Lynx, Tomcat
21-2263
Pressure
14.5
2.2
Heavy body, primers.
Lynx, Tomcat
21-2167
Pressure
14
2.8
Heavy body, primers, vitreous spray and porcelain.
Lynx, Tomcat
21-2168
CFM
FLUID TIP RANGE
TYPICAL MATERIALS
GUN
PART NO.
Siphon
Cougar AAA Air Cap
DESCRIPTION
26-101
AAA Tip Chart
Cleaning Kits
ORIFICE SIZE
0.011
ANGLE
PATTERN WIDTH
PART NO.
40°
8"
36-411
AAA Tip Cleaning Needles
DESCRIPTION
PART NO.
91-215
0.013
40°
8"
36-413
22-Piece Deluxe Cleaning Kit
10-501
0.015
40°
8"
36-415
17-Piece Standard Cleaning Kit
10-500
0.017
40°
8"
36-417
Needle Nozzle Kits
FE-LINE
DESCRIPTION
PART NO.
1.0 mm (0.0")
FM-10
1.2 mm (0.0")
FM-12
1.3 mm (0.0")
FM-13
1.4 mm (0.0")
FM-14
1.5 mm (0.0")
FM-15
1.7 mm (0.0")
FM-17
TOMCAT
DESCRIPTION
PART NO.
1.0 mm (0.0")
TC-10
1.3 mm (0.0")
TC-13
1.5 mm (0.0")
TC-15
1.8 mm (0.0")
TC-18
2.2 mm (0.0")
TC-22
2.8 mm (0.0")
TC-28
TJR
DESCRIPTION
6
PART NO.
1.0 mm (0.0")
60-TJR-30-10
1.2 mm (0.0")
60-TJR-30-12
1.4 mm (0.0")
60-TJR-30-14
C.A. Technologies
| Distributed by titantool.com
21-2266
21-2263
3M PPS™
DESCRIPTION
PART NO.
Adapter (For use with CAT TJR)
91-473
Adapter (For use with all CAT Lynx, Panther, SLP and Tomcat
Pressure-Fed Spray Guns
91-475
Adapter (For use with all CAT-X Gravity Spray Guns)
91-476
Kit (Contains 25 each: Large Lids, Filters, Liners and Sealing
Caps. For use with part number 91-461)
91-462
Kit (Contains 50 each: Medium Lids, Filters, Liners and Sealing
Caps. For use with part number 91-465)
91-466
Kit (Contains 50 each: Small Lids, Filters, Liners and Sealing
Caps. For use with part number 91-470)
91-471
Large, Hard Cup that supports and holds the PPS™ Large Flexible
Liner, (91-462). Maximum capacity of 850 mL. Can be used in
place of 1 Liter Aluminum Cup (51-403)
91-461
Medium, Hard Cup that supports and holds the PPS™ Small
Flexible Liner (91-466). Maximum capacity of 650 mL. Can be
used in place of Aluminum Cup (51-401)
91-465
Small, Hard Cup that supports and holds the PPS™ Mini Flexible
Liner (91-471). Maximum capacity of 450 mL. Can be used for in
place of all Standard Cups when used with the correct adapter.
91-470
PARTS & ACCESSORIES
Gun Repair Kits and Parts
Filters
DESCRIPTION
PART NO.
Jaguar Repair Kit (EP-J100H)
10-105
CPR Repair Kit
10-106
Panther Glue Gun Repair Kit
10-110
Tomcat Gun Repair Kit
10-112
Cougar AAA Gun Repair Kit
10-113
FE-Line Gun Repair Kit (CP-FELCFM)
10-140
Cat-X Repair Kit
10-161
TJR Gun Repair Kit
60-TJR-10
Tomcat Gun Head Insert
60-15C
FE-Line Gun Fan Control
60-1317
FE-Line Gun Air Valve
60-1320
FE-Line Gun Head Insert
60-36
FE-Line Gun Fluid Control Knob
60-1312
CPR Gun Fan Control
60-1504
Panther Gun Fan Control
60-1500
Cougar Air Cap Retainer
66-103
Cougar Gun Filter
66-125
Jaguar Fan Control
60-1502
Cat-X Fan Control
60-1380
Cat-X Air Valve
60-1379
Cat-X Fluid Control Knob
60-1376
Spacer for TJR
60-TJR-11
Common Gun Parts
PART NO.
Fluid Control Knob
60-202
Air Valve Assembly
60-1520
Air Control
60-1510
Air Control
60-1319
Fan Control
60-1505
Siphon Cup
Drip-proof and made of aluminum alloy. This cup is our standard
1-quart siphon. Gasket (P/N 51-321)
PART NO.
52-511
In-line Air Filter/Moisture Trap
(2 Regulators for two-gun operation)
52-513
Replacement Cartridge
52-551
Low Pressure Air Hoses
Temperature range: -20°F to 190°F
Textile reinforced
Smooth, red synthetic rubber casing
Oil resistant
Pressure rated at 200 PSI (1.38 MPa)
DESCRIPTION
PART NO.
Air Hose, 5/16" x 25'
53-112-25
Air Hose, 5/16" x 50'
53-112-50
Temperature range: 0°F to 190°F
Nylon 11, silicone-free tube
Braided high-strength synthetic yarn
Smooth, black synthetic rubber casing (RMA B ORS)
Oil resistant
Pressure rated at 750 PSI (5.17 MPa)
PART NO.
Fluid Hose, 1/4" x 25'
53-213-25
Fluid Hose, 1/4" x 50'
53-213-50
High Pressure AAA Hoses
51-303-R2
This 1-quart pressure cup and regulator is perfect for small painting
jobs that require precise fluid control. The cup is available in an
aluminum or stainless steel version and has a one way check valve
to prevent fluid from traveling back up into the gun or regulator.
This cup comes with a by-pass regulator for accurate control of cup
pressure. Gasket (P/N 51-320)
Pressure rated at 10 PSI (0.07 MPa)
DESCRIPTION
In-line Air Filter/Moisture Trap
(1 Regulator for single-gun operation)
DESCRIPTION
51-301
Pressure Cup with Regulator
Pressure rated at 150 PSI (1.03 MPa)
Low Pressure Fluid Hoses
For T100C, Panther, J100H, CPR and Cougar.
DESCRIPTION
These units provide one micron filtration of water and dirt in
compressed air lines. Rated at 60 SCFM, they are recommended
for point of use applications. Features manual drain, heavy duty
metal bowl construction and easy spin-off cartridge replacement.
Also includes metal regulator(s) and glass faced guage for accurate
pressure control.
DESCRIPTION
PART NO.
Fluid Hose, 3/16" x 25'
53-213-25
Air Hose, 1/4" x 25'
53-213-50
Coextruded, 25' - 3/16" Fluid x 1/4" Air Hose
9984595
Lubricant
DESCRIPTION
AAA Throat Seal Lubricant
C.A. Technologies | Distributed by titantool.com
PART NO.
91-36
7
WHEN YOUR BUSINESS
DEPENDS ON THE EQUIPMENT
YOU USE, YOU NEED TO
COUNT ON THE PEOPLE
DISTRIBUTING THEM
Titan creates programs that understand the way you like
to work. We will be right there listening, learning and
improving. Fixing problems head on and making sure they
do not happen again. Designing products that are easy
to use and maintain backed by the industry’s strongest
warranty. We think like craftsmen rather than accountants.
Our relentless commitment to helping every Titan loyalist
be their best leads to better work, improved ROI and
growing businesses.
NEW FOR 2016
CONNECTOR APP
In a matter of seconds you can get information about airless paint,
coating and HVLP sprayers, what coatings you can spray with your
sprayer or get a recommendation for a new sprayer.
AVAILABLE FOR DOWNLOAD TODAY.
For more information visit theconnectorapp.com
Apple and the Apple logo are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is
a service mark of Apple Inc. Android, Google Play and the Google Play logo are trademarks of Google Inc.
05/16
SL40609
JB71607A
All information contained in this brochure is based on the latest information available at the time of printing. Titan reserves the right to make changes at any time, without notice.
Due to continuous innovation, specifications may progressively change. Contact one of our dependable sales reps or call our dedicated customer service team for more information.
Titan Tool
| 1770 Fernbrook Lane | Minneapolis, MN 55447 | 800-526-5362 Phone | 800-528-4826 Fax | titantool.com