Instruction Manual
1
Read to connect and configure the product
Preparing for Setup
AM1-002526-003
July, 2014
Technically Certified
Preface
Thank you for buying the Wi-Fi WALKER WiMAX 2+ NAD11 (simply called the "product" or "Wi-Fi WALKER WiMAX 2+" from
here on). Before using the product, be sure to read the Setup Guide (this manual) and the Notes on Usage to ensure correct
use. The Setup Guide (this manual) handles only basic operations for main features.
As an instruction manual related to the product, the Setup Guide (this manual), the Notes on Usage, and the "取扱説明書 詳
細版 (Full Instruction Manual)" (Japanese) are available for download from the WiMAX Support Information website. In this
manual, all such manuals are collectively referred to as the "Instruction Manual".
• The PDF version of the "取扱説明書 詳細版 (Full Instruction Manual)" (Japanese) is also included in the product.
Connect the product to a PC or the like by means of wireless LAN or a microUSB cable, launch the web browser, type
"http://192.168.179.1" in the address and log in to the Advanced Settings on the Quick Setup Webpage to view "情報
(Information)", and access "マニュアル (Manual)".
• The PDF versions of the Instruction Manuals can be downloaded from the WiMAX Support Information website.
http://www.necat.co.jp/wimax/support/uqc/nad11/index.html
• Company names and product names referred to in this manual are trademarks or registered trademarks of the respective
companies.
• The illustrations and screenshots that appear in this manual may not be a precise representation of the actual product.
Furthermore, part of the screenshots used may be omitted.
2
Connecting to the Product from a PC, Smartphone or the Like
Attach the au Micro IC Card (LTE)
When attaching the au Micro IC Card (LTE), disconnect the product from the power source.
Remove the microUSB cable and cradle (sold separately) when they are connected.
Notch
a Insert the au Micro IC Card (LTE) with its IC
(metal) part facing down until it clicks into
SIM card slot
position.
* Refrain from inserting the au Micro IC Card (LTE) in the
opposite direction, or inserting cards other than the au
Micro IC Card (LTE), such as SD cards and au Nano IC Card
(LTE) with a conversion adapter, as doing so may cause
failures.
* Be careful not to touch or damage the IC (metal) part of
the au Micro IC Card (LTE).
Mac OS (OS X v10.9)
This section explains how to establish a wireless
LAN connection by WPS.
a In the Apple Menu, click on [システム環境設
定 (System Configuration)] - [ネットワーク
(Network)].
a Select [デスクトップ (Desktop)] on the [ス
タート (Start)] screen.
Enable
the wireless function of your PC.
b
b Select [Wi-Fi] from the list of services.
c From the [ネットワーク名 (Network Name)]
pull-down list, select the network name (SSID)
of the product.
* For details on configurations, refer to relevant
documentation such as the instruction manual for your PC.
c Click the network icon appearing in the
notification area (task tray).
* The network name (SSID) of the product can be found by
clicking on [W-LAN Info] on the display menu. (See "Check"
in STEP 1.)
Smartphone / Tablet (Android)
iPad/iPhone/iPod touch
Configuration with Rakuraku QR Start
Configuring with Rakuraku QR start
a Search the Google Play Store or elsewhere
for the "AtermらくらくQRスタート for
Android (Aterm Rakuraku QR Start for
Android)" application to download and install
it.
a Search the App Store or elsewhere for the
"AtermらくらくQRスタート for iOS
(Aterm Rakuraku QR Start for iOS)" application
to download and install it.
* This application is also available for download on the
"AtermらくらくQRスタート (Aterm Rakuraku QR Start)"
website listed below (as of July, 2014).
* This application is also available for download on the
"AtermらくらくQRスタート (Aterm Rakuraku QR Start)"
website listed below (as of July, 2014).
http://qr.aterm.jp
http://qr.aterm.jp
Attach the Battery Pack
a Slide the battery pack into the end with the
marking surface (Recycling symbol etc.) facing
up.
Contact the terminal of the battery pack onto
the terminal of this product and then push in.
Windows 8.1/8
Terminal area
d Choose the network name (SSID) of the
product from the list of networks.
b On the Home screen, tap the "Atermらくらく
QRスタート (Aterm Rakuraku QR Start)" icon.
* The network name (SSID) of the product can be found by
clicking on [W-LAN Info] in the display menu. (See "Check" in
STEP 1.)
2
1
b On the Home screen, tap [設定 (Configure)] to
turn off the [機内モード (Airplane Mode)] and
turn on [Wi-Fi].
c On the Home screen, tap the "Atermらくらく
QRスタート (Aterm Rakuraku QR Start)" icon
and then tap [OK].
* After a moment upon being activated, the Camera View will
be displayed.
Disclaimer and Safety Tips
Before using the product, please read through the "Exemptions" and "Safety Precautions (Observe Strictly)" on the Notes on
usage to ensure correct handling of the product.
When using the product
• This product can connect with WiMAX 2+ and WiMAX. When using High Speed Mode, although communication will
automatically switch between WiMAX 2+ and WiMAX in response to the reception environment, there may be periods of
several seconds during switching when communication will not be possible.
• Keep the product at least 1.5cm away from your body, and make sure that there are no intervening metallic objects when
you communicate.
• Communication is not possible even in the service area in places where the signal does not reach (e.g. tunnels and
basements). Also, communication is sometimes not possible in poor reception areas. Communication is sometimes
interrupted if you move into a poor reception area during communications.
• Since this product uses radio waves, the possibility of communication intercepts by third parties cannot be eliminated. (The
WiMAX 2+ method and the WiMAX method, however, offer secure communication encryption and secrecy functions.)
• It is presumed that the product will be used in Japan. It cannot be taken out of Japan and used abroad.
• Since this product is a radio station under the Radio Law, you may be asked to temporarily submit the product for
inspection in accordance with the Radio Law.
• Take care not to inconvenience people around you when you use the product in a public place.
• When the product is used by a child, parents or guardians should thoroughly read the "Instruction Manual" and teach the
child how to use it.
b Attach the rear cover
Press the cover onto the unit until the clips of
the Q side of the UQ logo click into position.
c With the Camera View screen, scan the
enclosed "無線LAN設定用QRコード
(Wireless LAN Setup QR code)".
* Attach the rear cover such that the UQ logo is facing front
when the POWER button is pointed upwards.
* Be sure to firmly press the edges of the cover so that there
are no gaps.
d Type the encryption key of the product in the
[パスワード (Password)] field and click on [接
続 (Connect)].
Charging the Product
a Insert the microUSB connector of the microUSB cable into the microUSB port on the product.
b Attach the other end of the USB connector to the AC adapter and insert the power plug of the AC
adapter into a power outlet.
d With the Camera View screen, scan the
enclosed "無線LAN設定用QRコード
(Wireless LAN Setup QR code)".
* The network name (SSID) of the product can be found by
clicking on [W-LAN Info] in the display menu. (See "Check" in
STEP 1.)
Explains how to charge using the enclosed AC adapter supplied with this product.
* Plug the microUSB connector into the product with its side bearing the USB mark facing down.
* The "無線LAN設定用QRコード (Wireless LAN Setup QR
code)" may be attached to the space provided below.
* The "無線LAN設定用QRコード (Wireless LAN Setup QR
code)" may be attached to the space provided below.
d Tap [設定適用 (Apply Changes)].
e Click on [接続 (Connect)].
* Make sure that the power of the product has been turned
ON.
* Plug the USB connector into the AC adapter with its side bearing the USB mark facing down.
* Make sure that the AC adapter is in a secure position.
e Tap [設定適用 (Apply Changes)].
* Make sure that the power of the product has been turned ON.
Product Communication Modes
The communication mode can be switched when connecting this product to WiMAX 2+ and WiMAX.
In “High Speed Mode”, switching between WiMAX 2+ and WiMAX will automatically occur in response
to the reception environment.
In “No Limit Mode”, WiMAX can be used without a limit on the speed with a maximum downlink of 40 Mbps.
Waiting or Idling
To minimize power consumption during operation, this product has a function of increasing the
useable time (waiting) and a function of prompt startup from a wireless idling state to a useable state
(idling state).
e [接続済み (Connected)] will be displayed in the
[状況 (Status)].
* Charging may stop in order to protect the battery from overheating.
For information on how to charge the battery pack on the cradle (sold separately), refer to the
Instruction Manual of the cradle "NAD11 クレードル (NAD11PUA) 取扱説明書" (Japanese).
Switch Power On
Press the POWER button until "Please Wait" appears in the product display and the product is turned ON.
Check the Contents of the Package
* Once the below screen display appears, proceed to STEP2.
If "New Program Released" appears on the display when the power is turned on, update the firmware.
(Refer to the "Firmware Update" on the reverse side)
 つなぎかたガイド
"Setup Guide" (Japanese)
Consult the homepage for the latest firmware.
 ご利用にあたっての注意事項
"Notes on Usage" (Japanese)
Check the product version on the “Terminal Info” display. (Reference to “Display Menu Operations” on the back surface.)
When “New Program Released” appears on the display of this product, it indicates that a new firmware exists. In that case, refer to the “Firmware
Update” on the back surface of this manual to update the version.
 無線LAN設定用QRコード（シール）
"Wireless LAN Setup QR code (label)" (Japanese)
Keep this label safe by placing it on the <Wireless LAN Setup
QR Code> field described in STEP 2 of the enclosed “Setup
Guide” (Japanese).
 Warranty card (Japanese)
1 Display
2 POWER button
Name
1 Display
2 POWER button
4 microUSB port
3 SET button/
RAKURAKU START button
3 SET button/
RAKURAKU
START button
5 SIM card slot
4 microUSB port
6 Strap hole
5 SIM card slot
6 Strap hole
Function
Lets you view the key settings of
the product.
Switches the power ON / OFF.
Used to light up the display that
has been automatically turned off.
Used to recover the product from
a state of waiting or being idle.
Press the SET button to switch the
display menu operations. Hold
down the SET button to view
individual menu items.
Used to configure the product
with Rakuraku wireless start.
Used to configure WPS-enabled
wireless LAN devices and wireless
LAN.
Used to light up the display that
has been automatically turned off.
Used to connect the enclosed
microUSB cable to the product or
when placing the product on the
cradle (sold separately).
Insert the au Micro IC Card (LTE)
into this slot.
Used to put a strap
g Check that a value of "1" or more is displayed
under the
icon in the product display.
* This number indicates the number of connected devices.
A value of "0" will be displayed when no connections have
been established.
i Hold down the SET button as instructed onscreen with the dialogue of [Press SET as
Indicated].
f Close the window.
g Check that a value of "1" or more is displayed
under the
icon in the product display.
j The message [Setup completed] will be
displayed.
g Tap [インストール (Install)].
* This number indicates the number of connected devices.
A value of "0" will be displayed when no connections have
been established.
k Check that a value of "1" or more is displayed
under the
icon in the product display.
* This number indicates the number of connected devices.
A value of "0" will be displayed when no connections have
been established.
Switching to English display
a Launch the Quick Setup Webpage and log in (Refer to STEP 4).
b Click [English] and then click [Save] from the menu on the left of the Quick Setup Webpage screen.
• The display and the Quick Setup Webpage of this product will switch to English.
Check
Names and Functions of Components
e The connection will be established.
f Tap [終了 (Finish)].
h Hold down the SET button once [WPS] is
displayed.
Use this cable to charge the product. It may also be used to
connect the product to the PC.
AC adapter
microUSB cable
 Rear cover
f Tap [OK].
g Hold down the SET button, and then briefly
press this same button once [RakurakuWireless
Start] is displayed.
Before you start using the product, make sure that you have all the following packaged with the product.
 AC adapter (NAD11PQA)
 NAD11 (main unit)
 Battery pack (NAD11UAA)
f Press the POWER button to switch the product
into the normal display, briefly press the SET
button a few times, and select [Setup WiFi LAN]
from the display.
h
i
j
k
Verify the following product settings.
• Primary SSID (nad11-xxxxxx)
• Primary key (encryption key) (AES) (13 alphanumeric characters)
* This number indicates the number of connected devices.
A value of "0" will be displayed when no connections have
been established.
Confirm the enclosed “Wireless LAN Setup QR Code (label)”.
How to confirm by the display menu is described below.
1 While the product display is in the "normal display", briefly press the SET button a few
times to display [W-LAN Info].
2 Hold down the SET button to display the primary SSID.
3 Briefly press the SET button and "Primary Key Push SET button" will be displayed. Then
briefly press the SET button again to display the Primary Key.
* A maximum of 12 alphanumeric characters can be displayed. When viewing 13 or more alphanumeric characters in SSID
display, a line feed mark will be displayed. Briefly press the SET button to insert a line feed to display the text. After inserting
the line feed, the next screen will be displayed by briefly pressing the SET button.
Tap [インストール (Install)].
Tap [完了 (Complete)] - [OK].
Tap [終了 (Finish)].
Check that a value of "1" or more is displayed
under the
icon in the product display.
<Wireless LAN Setup QR Code>
3
◆ If
Verifying the Connection Status
or
is displayed along with
in the display of the product,
Attach the QR code label to the location described in STEP 2 of the
enclosed つなぎかたガイド “Setup Guide” (Japanese).
* For an explanation of each icon, see "Displayed Information" on the reverse side
of this manual.
Primary Key
* Have these available for STEP 2.
* The Primary SSID and Primary key of this product are also indicated on the sticker under the battery pack.
configuration of the product has been completed.
◆ When "Not available" is displayed,
configure the connection destination in STEP 4 on the reverse side.
This QR code contains the default wireless LAN configuration information
(network name (SSID), encryption mode, encryption key) for this product.
4
Configuring the Connection Destination
Display Menu Operations
Displayed Information
WiMAX 2+/WiMAX / Wi-Fi SPOT Connection
Various configurations can be performed with this product by switching between menus in the display
setup mode.
The following screen displays are examples of some of the configurations.
Notification icons that indicate notifications, status icons that indicate the status of the product, and messages during product configurations are displayed on the product display.
Launch the Quick Setup Webpage
Switched by briefly pressing the SET button
* Returns to normal display when the POWER button is pressed briefly while switching menu.
a Open the web browser on the wireless LAN device (such as a smartphone) connected to the
Product in STEP 2.
b Open Quick Setup Webpage for the product.
Type "http://192.168.179.1" into the address bar in the web browser and either tap [実行 (Execute)] or [開
く (Open)], or press the Enter key on the keyboard.
* The screen will be automatically switched off due to an automatic function equipped with a timer. Press the POWER button to turn the display back on.
◆ Normal display
◆ Status message display
The status of the product is displayed in the lower
part of the screen.
Switched by holding down the SET button
Switched automatically
[Normal Display]
3
[Main Status Icons]
[Status bar]
Name
Indicator
1 Reception level
State
Explanation
Illuminating
Indicates the signal strength of WiMAX 2+ in 5 levels
Illuminating
Indicates the signal strength of WiMAX / Wi-Fi SPOT in 6 levels
Illuminating
In wireless LAN Access point mode
Illuminating
Indicates that the product is connected to the Internet with WiMAX 2+
Blinking
Indicates that a connection to the Internet is trying to be established with WiMAX 2+
Illuminating
Indicates that the product is connected to the Internet with WiMAX
Blinking
Indicates that a connection to the Internet is trying to be established with WiMAX
Illuminating
Indicates that the product is connected to the Internet with Wi-Fi SPOT
Blinking
Indicates that a connection to the Internet is trying to be established with Wi-Fi SPOT
Illuminating
Indicates that the product is set to the High Speed Mode
Illuminating
Indicates that the product is set to the No Limit Mode
Illuminating
Indicates that the device is outside the WiMAX 2+/WiMAX/Wi-Fi SPOT service area
Illuminating
Indicates that the product is connected to the Internet with wireless LAN access point mode
Illuminating
Indicates the status of the wireless LAN (numeral represents number of connected devices)
Illuminating
Indicates the remaining battery level on a scale of 6 levels
Illuminating
Indicates that the battery is being charged
Illuminating
Provides an approximate visual indication of the remaining battery level
If the display has been turned off, press the SET button to display the screen.
1
4
2
[Firmware Update]
2 Connection status
5
This menu is displayed to notify users when a firmware update is available.
c Tap or click on [Advanced Settings Top] in the screen of the Quick Setup Webpage.
6
[Advanced Settings Top] button
[Device Information]
Displays information such as the version information of the product.
Your phone number is recorded as user information. However the product cannot make or receive voice calls.
[Wireless LAN Information]
Displays the network name (SSID) and the encryption key.
Follow instructions below for detailed settings
d-1 Perform initial configurations for the administrator password.
Type a password (any string of characters) in the [パスワード (Password)] (password reentry) field and tap
or click on [設定 (Set)].
* When viewing 13 or more alphanumeric characters in SSID display, a line feed mark will be displayed. Briefly press the SET button to insert a line feed to display the text. After inserting the line
feed, the next screen will be displayed by briefly pressing the SET button.
3 Wireless LAN status
* Numbers 0 - 9, letters a - z and A - Z, hyphens (-) and underscores (_) may be used in the password. A password may be up to 64
single-byte characters.
This password will be required every time you open the "Advanced Settings" in the "Quick Setup
Webpage" for the product.
Make sure that you do not lose this password.
4 Battery status
[Function Settings]
[Communication Mode]
5 Remaining battery level
6 Messages
This menu is displayed when the 5GHz band is set to "Enable" in Quick Setup Webpage, and not
connected to Wi-Fi SPOT.
Tap or click
Product Specifications
Firmware Update
■ Main Unit
Administrator Password Memo
admin
Administrator Password
Administrator Password
Tap
Click
[Connection Destination]
[Wi-Fi SPOT]
Configuring the Connection Information
[Switching between WiMAX and a Wi-Fi SPOT]
● Connecting to WiMAX 2+/WiMAX
This menu is displayed when the "Wi-Fi SPOT Feature" is set to "Enable" in Quick Setup Webpage. (Refer to STEP 4.)
Follow procedures below to add profiles when information required for internet connection (user name, password
etc.) is specified by your WiMAX operator.
If there is no such information provided, you can use the profile (Profile name "Internet") of this product to
connect to internet.
When using a smartphone / tablet
(Android) / iPad / iPhone / iPod touch
When using a PC
a Tap [ネットワーク設定 (Network Settings)] [プロファイル設定 (Profile Settings)].
b After selecting [no setup] in the [プロファイ
ルリスト (Profile List)], choose [select], enter
the setup information such as the APN of the
WiMAX operator to whom you are subscribed,
and tap [設定 (Apply)].
a Tap [ネットワーク設定 (Network Settings)] [プロファイル設定 (Profile Settings)].
b After selecting [no setup] in the [プロファ
イルリスト (Profile List)], enter the setup
information such as the APN of the WiMAX
operator to whom you are subscribed, and
click on [設定 (Apply)].
c Tap [保存 (Save)].
Try opening a website to verify the connection.
● Switching to a Wi-Fi SPOT
● Switching to WiMAX 2+/WiMAX
[Rakuraku Wireless Start / WPS Settings]
This menu is used to setup Rakuraku Wireless Start and WPS.
Be sure to perform configurations after first activating Rakuraku Wireless Start or WPS on the wireless LAN device.
b When the message "New Program Released" appears in the product display, briefly press the SET
button to return the product to the normal display.
c While the display appears in normal display, briefly press the SET button to switch the display
menu.
d On the display menu, select "Firmware Update" and hold down the SET button.
e When the message "Confirm Version?" is displayed, briefly press the SET button to select "YES" and
then hold down the SET button.
f When the message "Download?" is displayed, briefly press the SET button to select "YES".
g Hold down the SET button and release it when "Downloading" appears.
h When the update has been completed, the product will automatically reactivate and the display
will appear.
Firmware cannot be updated when the product is connected to the cradle (sold separately) and used in wireless LAN Access point mode. Disconnect
the product from the cradle (sold separately) and change to router mode to update the firmware.
By using "NEC WiMAX 2+ Tool", an application designed exclusively for this product, it is possible to
view information of the product on your smartphone, etc. and perform operations to switch to or
pause Wi-Fi SPOT services.
d
e
f
g
* Configure this while you are in a Wi-Fi SPOT service area.
h Click on [設定 (Set)], and then on [保存 (Save)].
i Check that the status of the connection
displayed on the product appears as "(Wi-Fi)".
Try opening a website to verify the connection.
■ LAN
Communication method
Supported frequencies
Wi-Fi security methods
Maximum number of simultaneous
connections
AC adapter
O Take note of the administrator password as it will be required in order to configure the product.
If you have forgotten the administrator password, it will not be possible to access the screen of the
Quick Setup Webpage and it will be necessary to initialize the product and redo all configurations.
This feature is used to initialize the product back to its factory settings.
This product can be used with OSs such as Windows®, Macintosh,
Linux etc. which support TCP/IP protocol stack (Japanese OS only).
However, the following OSs are supported during USB connection.
Windows® 8.1, Windows® 8, Windows® 7 Japanese version, 32bit
(x86) version and/or 64bit (x64) version, Japanese version of
WindowsVista® (SP2 and later) 32bit (x86) version and Mac OS X
v10.5 (Intel), v10.6 (Intel), v10.7 (Intel), v10.8 (Intel), v10.9 (Intel).
The following WWW Browsers are available when performing
settings in Quick Setup Webpage.
Initialization Method
When the product is not operating properly or when wanting to return the product to the factory
settings, perform initialization by following the steps outlined below. (This will delete all user settings.)
a Press the POWER button and set the display to normal.
b Briefly press the SET button a few times to switch the display menu.
c Select "Initialize" on the display menu and hold down the SET button.
d Briefly press the SET button to select "YES" in reply to "Start Initialize" and then hold down the SET button.
e Initialization will be completed once the product has been reactivated.
Windows® 8.1 supporting;
• Internet Explorer 11.0
• Firefox 28
• Google Chrome 33
• Opera 20
Windows® 8 supporting;
• Internet Explorer 10.0
• Firefox 28
Input
Output
Physical dimensions
Weight
Operating environment
microUSB cable
• Google Chrome 33
• Opera 20
Windows® 7 supporting;
• Internet Explorer 8.0/9.0/10.0/11.0
• Firefox 28
• Google Chrome 33
• Opera 20
Windows Vista® (SP2 and later) supporting;
• Internet Explorer 7.0/8.0/9.0
• Firefox 28
• Google Chrome 33
• Opera 20
Mac OS X v10.9 supporting
• Safari 7.0
• Firefox 28
• Google Chrome 33
• Opera 20
Wi-Fi (compliant with IEEE802.11ac/n/a/g/b)
Wi-Fi: 2.4GHz/5GHz
WEP: 128bit
WPA-PSK: TKIP / AES
WPA2-PSK: TKIP / AES
Wi-Fi: 10 devices / USB: 1 device
■ AC adapter
Administrator Password Memo
[Initialize]
WiMAX 2+, WiMAX, Wi-Fi (compliant with IEEE802.11ac/n/a/g/b)
WiMAX 2+/WiMAX: 2.5GHz
Wi-Fi: 2.4GHz/5GHz
Supported frequencies
* If the message "管理者パスワードが設定されていません 管理者パスワードを設定しますか (The administrator
password has not been set. Would you like to set the administrator password)" is displayed when the exclusive application is
activated, set the password by following the instruction on-screen.
* Select "-" for connection destinations other than the preset.
b Perform configurations based on
information provided by the provider of the
Wi-Fi SPOT service you will be using.
Click on [設定 (Set)].
Click on [保存 (Save)].
Click on [Wi-Fi スポット設定 (Wi-Fi SPOT
Settings)] - [基本設定 (Basic Settings)].
Place a check in "使用する (Enable)" for the
"Wi-Fi スポット機能 (Wi-Fi SPOT Feature)".
Communication methods
Be sure to configure the password before activating the exclusive application.
c Click [保存 (Save)].
Try opening a website to verify the connection.
a Click on [Wi-Fi スポット設定 (Wi-Fi SPOT
Settings)] - [接続先設定 (Access Point
Settings)].
b Click on [接続先登録 (Access Point
Registration)].
c Configure the connection destination.
a Select the connection destination.
■ WAN
Smartphone Application "NEC WiMAX 2+ Tool"
* The Android edition enables remote-activation from the exclusive application. Search the Google Play or App Store for "NEC
WiMAX 2+ Tool" to download and install this exclusive application.
* The displayed content may be grayed out.
* If you have any question, please check with the WiMAX
operator to whom you are subscribed to.
*1: The continuous standby time and continuous communication time may vary depending on the communication network being used.
*2: The continuous communication time when connected to a single wireless LAN device.
*3: Use of USB2.0 is recommended as a sufficient transfer rate cannot be achieved with USB1.1. It should be noted that operation is not guaranteed with all
computers that are supported.
While the update is in progress, the message "Updating NEVER POWER OFF" will be displayed.
● Connecting to a Wi-Fi SPOT (Public Wireless LAN Service)
When using a smartphone / tablet
When using a PC
(Android) / iPad / iPhone / iPod touch
* Tap [← PC用ページに戻ります。(Return to Page for PC)]
and perform configurations by following the steps in "When
using a PC" in the screen for the Quick Setup Webpage for
PC.
Approx. 109 (W) × 65 (H) × 8.2 (D) mm
Approx. 81g
USB2.0 High Speed (microUSB terminal) *3
Organic electroluminescence display (monochromatic), approx. 0.8 inch
DC5.0V, 1.5A
Lithium ion, 3.8V, 2100mAh
Waiting state: Approx. 30 hours
Idle state (Remote start available): Approx. 300 hours
Continuous standby time *1
Idle state (Remote start not available): Approx. 500 hours
When connected on WiMAX 2+: Approx. 420 minutes
Continuous communication time *1 *2
When connected on WiMAX: Approx. 630 minutes
Operating temperature range: 5°C to 35°C
Operating environment
Operating humidity range: 35% to 85%
Charging time
Approx. 150 minutes (using the enclosed AC adapter)
a Press the POWER button on the product and set the product in the normal display.
[Remote Start]
admin
Physical dimensions (W x H x D)
Weight
Interface
Display
Power supply
Battery pack
Follow the steps listed below to update the firmware.
d-2 Type [admin] for the [名前 (Name)] or [ユーザー名 (User Name)] and the "administrator password"
set in d-1 for the [パスワード (Password)], and then tap [ログイン (Login)] or click on [OK].
* The displayed content may be grayed out.
* If you have any question, please check with the WiMAX
operator to whom you are subscribed to.
Indicates various messages.
[Setting Wi-Fi operation 5GHz]
Administrator Password Field
Length
Weight
Interface
AC100 to 240V, 50/60Hz
DC5.0V, 1.0A
Approx. 47 (W) × 54 (H) × 19 (D) mm
Approx. 41g
Operating temperature range: 5°C to 35°C
Operating humidity range: 35% to 85%
Approx. 1.0m
Approx. 30g
USB plug: Type A
microUSB: Type B
• Safari 6.1
• Firefox 28
• Google Chrome 33
• Opera 20
Mac OS X v10.6 supporting
• Safari 5.1
• Firefox 28
• Google Chrome 33
• Opera 20
Mac OS X v10.5 supporting
• Safari 5.0
Android (2.3/3.0/3.1/3.2/4.0/4.1/4.2/4.3) supporting
• Android standard browser
iOS (5.0/5.1/6.0/6.1/7.0) supporting
• iOS standard browser
Mac OS X v10.7/v10.8 supporting
■ Aterm is a registered trademark of NEC Corporation. ■ Rakuraku wireless start and Rakuraku QR start are registered trademarks of NEC Platforms, Ltd. ■ Windows is a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries. ■ Mac, Macintosh, Mac OS, OS X,
iPad, iPhone and iPod touch are trademarks of Apple Inc. registered in the United States and/other countries. App Store is a service mark of Apple Inc. ■ The iPhone trademark is used under license from Aiphone Co., Ltd. ■ Internet Explorer is a trademark or registered trademark of Microsoft Corporation in the
United States and/or other countries. ■ Firefox® is a trademark or registered trademark of US Mozilla Foundation in the United States and/or other countries. ■ Opera is a trademark or registered trademark of Opera Software ASA ■ Android and Play Store are trademarks or registered trademarks of Google Inc.
■ "QR Code" is a registered trademark of DENSO WAVE INCORPORATED. ■ Other company names, brand names, service names and so on are trademarks or registered trademarks of their respective owners. TM and the ® mark may be omitted in this manual.
© NEC Platforms, Ltd. 2014 This manual may not be duplicated or updated, or duplicate copies of the manual distributed, without prior written permission from NEC Platforms, Ltd.
July, 2014, 3rd Edition
Sold by: KDDI CORPORATION, OKINAWA CELLULAR TELEPHONE COMPANY
Manufactured by: NEC Platforms, Ltd.