Quality that lasts
Irrigation and Water Products
2015
Tape Twist – lock Fittings
Tavlit expands its range of tape fittings for various sizes.
Features:
Technical Specifications:
•Excellent resistance to mechanical pull:
Prevents accidental disconnection by people or machinery.
•U.V. protected for extended life in harsh conditions.
•Designed to resist high pressure and wide temperature
range.
•High chemical resistance.
•Wide grips for easy assembly
•Streamlined design to allow automatic coiling.
•Easy grip on
•Made with reliability, long life and durability in mind.
•Maximum operating pressure 4 bar (60 psi).
•Material: Polypropylene
•Threads: N.P.T, F.H.T.
Tape Twist - lock coupling
Size
Wall thickness
mil (mm)
ID
Inch (mm)
CTT
16 mm x 16 mm
4 - 45 )0.10 – 1.12(
0.634 )16.1(
CTT22
22 mm x 22 mm
6 - 25 )0.15 – 0.63(
0.875 )22.2(
CTT25
25 mm x 25 mm
6 - 25 )0.15 – 0.63(
0.99 )25.15(
Cat. Number
Tape Twist - lock male adaptor
Cat. Number
Size
Wall thickness
mil (mm)
ID
Inch (mm)
MHTA12TA
1/2"
MHT x 16 mm
4 - 45 )0.10 – 1.12(
0.634 )16.1(
MHTA34TA
3/4"
MHT x 16 mm
4 - 45 )0.10 – 1.12(
0.634 )16.1(
MHTA34TA22
3/4"
MHT x 22 mm
6 - 25 )0.15 – 0.63(
0.875 )22.2(
MHTA34TA25
3/4"
MHT x 25 mm
6 - 25 )0.15 – 0.63(
0.99 )25.15(
Tape Twist - lock swivel female adaptor
Wall thickness
mil (mm)
ID
Inch (mm)
4 - 45 (0.10 – 1.12)
0.634 (16.1)
6 - 25 (0.15 – 0.63)
0.875 (22.2)
6 - 25 (0.15 – 0.63)
0.99 (25.15)
Size
Wall thickness
mil (mm)
ID
Inch (mm)
TA1617
16,17 mm x16,17 mm
4 - 45 )0.10 – 1.12(
0.634 )16.1(
TA2220
22 mm x 20 mm
6 - 25 )0.15 – 0.63(
0.875 )22.2(
TA2525
25 mm x 25 mm
6 - 25 )0.15 – 0.63(
0.99 )25.15(
Cat. Number
SA34TAFHT
SA34TA22FHT
SA34TA25FHT
Size
3/4”
FHT
swivel x 16 mm
3/4”
FHT
swivel x 22 mm
3/4”
FHT
swivel x 25 mm
Tape Twist - lock barb adaptor
Cat. Number
Twist – lock flush valve for tape
For proper flushing of surface and subsurface laterals Automatically flushes the drip laterals
at the beginning of every irrigation. Saves labor and reduces dirt accumulation.
Features:
Technical Specifications:
•Excellent resistance to mechanical pull:
Prevents accidental disconnection by people or machinery.
•U.V. protected for extended life in harsh conditions.
•Designed to resist high pressure.
•High chemical resistance.
•Made with reliability, long life and durability in mind.
•Maximum operating pressure 4 bar (60 psi).
•Normally open.
•Closing pressure 2 ± 0.7 m. (3 psi ± 1)
•Material: Polypropylene.
Cat.
Number
Size
TA16FLE
16
TA22FLE
TA25FLE
Wall thickness
Mil (mm)
ID
mm (inch)
OD
mm (inch)
4 - 45 (0.1 – 1.1)
16 (0.634)
16.4 – 16.9
(0.646 – 0.664)
22
6 - 25 (0.15 – 0.63)
22 (0.875)
22.6 – 23.0
(0.891 – 0.905)
25
6 - 25 (0.15 – 0.63)
25 (0.99)
25.81 (1.06)
Lay – Flat Super Start Connectors
TAVLIT is expanding its line of start connectors for lay-flat
pipes, with its super starter line.
Super starters are press fit products and allow the user to
dismantle easily the tape or the pipe from the lay flat pipe
at the end of the season.
The starter base low profile enables the user to roll the
lay-flat pipe with the starters on them in a compact manner
and store easily while saving considerable space.
The super starters line is added to the standard starters
line which connects directly to the drip line or tape, and
might require cutting the line at the end of the season in
order to roll the lay flat and the threaded starters line
used for connecting valves, manifolds etc. This product
high profile makes rolling of lay flat less convenient and
therefore it is suitable for permanent applications.
Applications:
Suitable for agriculture, horticulture and potable water
systems.
Features:
•Excellent resistance to mechanical pull:
Prevents accidental disconnection by people or machinery.
•Three types of connectors:
- Super starter press fit connectors, for easy and quick
assembly. Their low profile enables easy rolling and
compact storage of the lay flat pipes.
- Standard starters for connecting directly to the drip
line or tape.
- Threaded starters to connect valves, manifolds and
all other accessories
•U.V. protected for extended life in harsh conditions.
•P.P. connectors for high chemical resistance.
•Made with reliability, long life and durability in mind.
•Special design for inserting starter to the hole in the pipe
prevents tearing and prolongs lay flat life.
Technical Specifications
•Maximum operating pressure: 8 bars (120 psi).
•Material:
- Acetal for barb starters
- Polypropylene for nut/ring or threaded starters.
Lay – Flat Super Start Connectors
Tape starter
Threaded starter
Super starter
Male T Connector Sqtta16 super starter
Cat.
Number
Size
Wall thickness
Mil (mm)
ID
mm (inch)
OD
mm (inch)
SQTTA16M
16 - super
starter - 16
4 - 45 (0.1 – 0.110)
16 (0.634)
16.4 – 16.9
(0.646 – 0.664)
Male angle connector 16 super starter
Cat.
Number
Size
Wall thickness
Mil (mm)
ID
mm (inch)
OD
mm (inch)
SQETA16M
16 - super
starter - 16
4 - 45 (0.1 – 0.110)
16 (0.634)
16.4 – 16.9
(0.646 – 0.664)
Lay Flat Base for super starter
Cat. Number: BLFS16
Plug for Super Starter
Cat. Number: PSS16
Additional Products
Female Lay Flat Over size starter
Cat. Number: LF34FOZ
¾” Female
19 mm punch
12 mm Hex
Large flow passage for high flow applications.
Lay Flat Over size starter
Cat. Number: LF34H12
¾” Female
19 mm punch
12 mm Hex
Lay Flat Driver for oversize
Cat. Number: LFDRB
12 mm Hex - for Lay flat oversize
Hose – lock Fittings
Tavlit offers a range of heavy - wall drip fittings of various sizes.
Features:
Technical Specifications:
•Excellent resistance to mechanical pull:
Prevents accidental disconnection by people or machinery.
•U.V. protected for extended life in harsh conditions.
•Designed to resist high pressure.
•Exellent chemical resistance.
•Streamlined design to allow automatic coiling.
•Made with reliability, long life and durability in mind.
•Maximum operating pressure 8 bar (120 psi).
•Material: Polypropylene.
•Threads: N.P.T, FHT.
Hose - lock coupling fittings
Cat. Number
Size
Wall thickness
mil (mm)
ID
inch (mm)
CTL18
18 x 18 mm
25 - 50 (0.64 - 1.27)
0.62 (15.7)
CTL20
20 x 20 mm
40 - 55 (1.0 -1.4)
0.69 (17.6)
CTL25
25 x 25 mm
65 - 75 (1.65 - 1.91)
1.05 (26.8)
Hose - lock male thread fittings
Cat. Number
Size
Wall thickness
mil (mm)
ID
Inch (mm)
MPTA12TL18
1/2”
Male x 18 mm
25 - 50 (0.64 - 1.27)
0.62 (15.7)
MPTA34TL18
3/4”
Male x 18 mm
40 - 55 (1.0 -1.4)
0.69 (17.6)
Hose - lock female thread swivel fittings
Cat. Number
Size
Wall thickness
mil (mm)
ID
Inch (mm)
SA34TL18FHT
3/4”
swivel x 18 mm
25 - 50 (0.64 - 1.27)
0.62 (15.7)
SA34TL20FHT
3/4”
swivel x 20 mm
40 - 55 (1.0 -1.4)
0.69 (17.6)
SA34TL25FHT
3/4”
swivel x 25 mm
65 - 75 (1.65 - 1.91)
1.05 (26.8)
Wall thickness
mil (mm)
ID
Inch (mm)
Hose - lock swivel Tee fittings
Cat. Number
Size
TSTL1834FHT
18 mm x 3/4”
swivel x 18 mm
25 - 50 (0.64 - 1.27)
0.62 (15.7)
TSTL2034FHT
20 mm x 3/4”
swivel x 20 mm
40 - 55 (1.0 -1.4)
0.69 (17.6)
TSTL2534FHT
25 mm x 3/4”
swivel x 25 mm
65 - 75 (1.65 - 1.91)
1.05 (26.8)
New series of Ball Valve
Tavlit presents its new designed full bore ball valves for heavy duty applications.
Features:
Technical Specifications:
•Designed to resist high pressure and wide temperature
range.
•Made with reliability, long life and durability in mind.
•Full bore valve for minimal head loss.
•Very easy actuation.
•High chemical resistance.
•Self-seal threads.
•Made with reliability, long life and durability in mind.
•Max. Working pressure:16 bar (232 psi).
•Threads: B.S.P.T, N.P.T
•Available Sizes: (1/2”-2”)15-50 mm.
•Temperature Range:-20 to +90 C° (-4 to 190 °F).
•Available in M/F, Swivel/F 1/2”-2”
11/2” –2 “ Ball valves
/ ”,3/4”,1” Ball valves
12
Materials:
13 Nahal Snir St. North industrial zone Yavne, Israel 8122450
Tel: 972-8-9328010, Fax: 972-8-9328020 export@tavlit.co.il www.tavlit.co.il
Ver.1 Apr.15-Eng
•Body: PP + GF
•Nut: PP + GF
•Handle: PP + GF
•Ball: PBT
•Gasket: PE + PTFE
•O-Rings: EPDM