TEQIP-II Goods- Tender Notice - Kamla Nehru Institute of

advertisement
KAMLA NEHRU INSTITUTE OF TECHNOLOGY,
SULTANPUR (U.P.) 228118
INVITATION FOR BIDS (IFB)
NATIONAL COMPETITIVE BIDDING (NCB)
(Up Gradation And Maintenance Of Campus Wide Networking)
Advt. No:KNIT/TEQIP-II/15/02, Date:07/07/2015 IFB No. TEQIPII/UP/UP2G05/13& TEQIP-II/UP/UP2G05/58
1.
2.
The Government of India has received a Credit 4685-IN from the International Development Association and a Loan (LoanIN) from the International Bank for Reconstruction and Development in various currencies towards the cost of Technical
Education Quality Improvement Programme,Phase-II[TEQIP-II] project and it is intended that part of the proceeds of
this credit will be applied to eligible payments under the contracts for which this Invitation for Bids is issued.
The Director, KNIT, Sultanpur (UP) India now invites sealed bids from eligible bidders for supply of Packages listed
below: now invites sealed Bids from eligible bidder for supply & installation/laying of active and passive components
related to campus wide networking as given below:
IFB No: TEQIPII/UP/UP2G05/13: Supply Of Equipments And Other Works For Up Gradation And Maintenance
Of Campus Wide Networking: Switch 8 ports,16 ports,24 ports,48 ports (layer 2 with Smart features),Switch 28 ports
(layer 3), 6/8 Slots Chasis based core switch, Wireless Lan Controller, Wireless Access Points (WAP ), Rack 18 U,
Laying of fiber underground in HDPE pipe etc.
Bid Document Sale Start Date: 22.07.2015, 11:00 Hrs.
Pre Bid meeting: 05.08.2015,14:30 hrs
Last date of submission of duly filled bid document:26.08.2015 up to 14:00 hrs
IFB No: TEQIP-II/UP/UP2G05/58: Firewall and Log Analyser For Up Gradation And Maintenance Of Campus
Wide Networking
Bid Document Sale Start Date: 22.07.2015, 11:00 Hrs.
Pre Bid meeting: 08.08.2015,14:30 hrs
Last date of submission of duly filled bid document:28.08.2015 up to 14:00 hrs
3.
Interested Bidders may obtain further information on purchase of bid documents, time table for issue of bids and
submission, cost of bid and methods of payments, bid security and pre bid meeting, from the office of the TEQIP Cell,
KNIT Sultanpur (UP) -228118, India, or visit the Institute website : http://www.knit.ac.in
4. Bid document can be downloaded from the institute website. Separate bid should be quoted along with the separate
document fee. Downloaded bids should be submitted along with a non-refundable Demand Draft of Rs. 2000/- for each in
favour of the Director, KNIT, Sultanpur, payable at Sultanpur (UP)-228118 , India.
Director
NOTICE INVITING QUOTATION (Under National Shopping of TEQIP-II)
1. Director, KNIT Sultanpur invites sealed quotations from eligible bidders for supply of goods, equipments for different
departments /central facility of the Institute under TEQIP-II. Separate quotations should be submitted for each package of
various Departments / Central Facility.
2. Quotation opening schedule: (I) Packages of Civil & Mech. Engg. can be submitted on or before 06/08/2015 up to
15.00 hrs and will be opened on same day at 15.30 hrs & (II) Packages of Electrical Engg., Electronics Engg,
Furniture, Air Conditioners with Stabilizers, Server, Printer, Laptop, AV system etc. can be submitted on or before
07/08/2015 up to 15.00 hrs and will be opened on same day at 15.30 hrs.
3. Quotations can be submitted using downloaded forms available on the institute website, along with a Bank Draft of EMD (as
mentioned in the tender document) in favour of the Director, KNIT, Sultanpur, payable at Sultanpur (UP). No document fee
is required for quotations under National Shopping.
For EMD, Specifications, Tender Document and other details visit our website:www.knit.ac.in
Director
KAMLA NEHRU INSTITUTE OF TECHNOLOGY,
SULTANPUR (U.P)- 228118
Phone & Fax - 05362-240454
INVITATION FOR QUOTATION
(Under National Shopping of Goods/Equipments TEQIP-II)
You are invited to submit your most competitive quotation for the following goods with item wise detailed
specifications. Sealed and separate quotations for the different packages of various departments are invited for supply of
items along with earnest money deposit (EMD) in the shape of Demand Draft of PNB/SBI/BOB/BOLLD/CBI/UBI in
favour of Director KNIT Sultanpur Avadh (UP)/ cash receipt of the Institute.
Quotation opening schedule:
(i) Quotations for Packages of Civil and Mechanical Engg. should be submitted on or before 06/08/2015 upto
15.00 hrs and will be opened on same day 06/08/2015 at 15.30 hrs in the committee room of the institute.
(ii) Quotations for packages of Electrical Engg. , Electronics Engg, , Furniture , Air Conditioners with
Stabilizers , Server, Printer, Laptop, AV system etc. should be submitted on or before 07/08/2015 upto 15.00
hrs and will be opened on same day 07/08/2015 at 15.30 hrs in the committee room of the institute.
GENERAL INSTRUCTIONS
1.
Government of India has received a credit from the International Development Association (IDA) towards the cost
of the Technical Education Quality Improvement Programme[TEQIP]-Phase II Project and intends to apply
part of the proceeds of this credit to eligible payments under the contract for which this invitation for quotations
under National shopping is issued.
2.
Each downloaded duly quoted package should be submitted along with nationalized/scheduled bank demand draft
of appropriate amount as an Earnest money deposit (EMD) in favour of “Director, K.N.I.T. Sultanpur (UP), (as
amount mentioned in each package, @2% for each package,), else bid(s) is/are liable for rejection in toto. Separate
draft of EMD should be for each package.
3.
Supplier(s)/Bidder(s) should be manufacturer/distributor/dealer/authorized firm of the mentioned product(s)/goods
and should submit the copies of ST No., company/firm registration or equivalent registration with the Central/State
Government of India if any. Copies of OEM / Latest authorized dealership certificate for respective items should be
enclosed.
4.
The quotation(s)/bid(s) shall be sent in sealed envelope either by courier / post or in person only, within stipulated
time period given in the respective package/bid document. The sealed envelope should clearly indicate on the left
side corner of the envelope the Package no. The bid(s)/quotation(s) shall be submitted to the office of the
Coordinator (Procurement), TEQIP-II Cell, K.N.I.T. Sultanpur-228118 (UP) before the stipulated date and
time. Bidder(s) should ensure that the bids submitted them are reached well within stipulated day and time. Delay
in submission of bid(s) for whatsoever reason will not be considered. Such bids are liable for rejection.
5.
Prices quoted should be inclusive of all taxes. Rate should be quoted “FOR” K.N.I.T. Sultanpur – 228118 (UP).
Rate should be quoted in Indian Rupees inclusive of all Taxes, Duties, Transportation, Insurance, Installation,
Commissioning etc. All duties and other levies payable by the supplier under the contract shall be included in the
unit price. Break up of applicable taxes shall be quoted separately for all items.
6.
Information brochures/ Product catalogue, if any must be accompanied with the quotation clearly indicating the
model quoted for.
7.
The Prices should be quoted in Indian Rupees only. Format for submission of quotation is in Annexure-I.
8.
The contract shall be for the full quantity as described above. Corrections, if any, shall be made by crossing out,
initialing, dating and re writing. Signature of the Supplier should be there on every page of the bid.
9.
The prices quoted by the bidder shall be fixed for the duration of the contract and shall not be subject to adjustment
on any account. Quotation shall remain valid for a period not less than 45 days from date of opening.
10. Evaluation of Quotations: The Purchaser will evaluate and compare the quotations determined to be substantially
responsive i.e. which are properly signed; and confirm to the terms and conditions, and specifications. The
Quotations would be evaluated for all items together for each package.
11. Award of contract: The Purchaser will award the contract to the bidder whose quotation has been determined to be
substantially responsive and who has offered the lowest evaluated quotation price.
(i) Notwithstanding the above, the Purchaser reserves the right to accept or reject any quotations and to cancel the
bidding process and reject all quotations at any time prior to the award of contract.
(ii) The bidder whose bid is accepted will be notified of the award of contract by the Purchaser prior to expiration
of the quotation validity period. The terms of the accepted offer shall be incorporated in the purchase order.
12. Payment shall be made in Indian Rupees as follows:
Satisfactory Delivery Installation and Acceptance - 100% of total cost
13. All supplied items should be under warranty of 12 months from the date of successful acceptance of items.
14. Commissioning / Installation is at suppliers cost. Supplier should provide free demonstration for the equipment /
item provided. At least one hard copy/soft copy (CD) of working manual of each equipment/item(s) should be
provided during the supply of goods at free of cost.
15. (a) Conditional Bid(s)/Quotation(s) will not be accepted. (b) Any breach of term(s) of contract at any stage and/or
non-execution of firm Purchase Order by the supplier(s)/Bidder(s) shall be lead to forfeiture of Earnest money
deposit(s).
16. All legal disputes are subjects to the jurisdiction of Sultanpur (UP) court only.
17. Right to accept or reject any bid or all bids without assigning any reason is reserved with the Institute (or Purchaser).
Sd/Coordinator (Procurement)
On behalf of the
Director, K.N.I.T.Sultanpur(UP) – 228118
Annexure-I
FORMAT FOR QUOTATION SUBMISSION
(In letterhead of the supplier with seal)
Date: _______________
To:
The Director,
K.N.I.T. Sultanpur-228118 (UP)
Sl.
Description of goods
No.
Qty.
Unit
Quoted Unit rate in Rs.
Total
(with full
(Including Sales tax and other taxes payable ,Ex Factory
Price
Specifications)
price, excise duty, packing and forwarding, transportation,
( Rs.)
insurance, other local costs incidental to delivery and
warranty/ guaranty commitments)
Total Cost
*Break up of applicable taxes shall be quoted separately .
Total Cost Rs. ________________
We agree to supply the above goods in accordance with the technical specifications for a total contract price
of Rs. ———————— (Amount in figures) (Rupees ————————amount in words) within the
period specified in the Invitation for Quotations.
We confirm that the normal commercial warranty/ guarantee of ——————— months shall apply to the
offered items and we also confirm to agree with terms and conditions as mentioned in the Invitation Letter.
We hereby certify that we have taken steps to ensure that no person acting for us or on our behalf will engage
in bribery.
Signature of Supplier
Name: __________________
Address: __________________
Contact No: ______________
Department of Civil Engineering,
KNIT, Sultanpur
Geotechnical Engineering Lab
Package Code- TEQIPII/UP/UP2G05/4
PackageName- TEQIP-II/UP/KNIT/CE/GE/Lab/Shopping/01
Earnest Money Deposit (EMD) – Rs. 41000=00
Delivery Period—45 days
S/N
1
Name of Equipment
Triaxial Shear Apparatus,
Electronic
Specifications
Ref: Standard IS : 2720 (Part XI & XII) BS 1377-7, 1924 -2, ASTM
D2850, D4767 AASHTO T296, T297
Supplied with the following:
Load Frame, Motorised, 30 speeds, 50kN (5,000 kgf) capacity 30
fixed speeds between 0.00048 mm/min and 6.00 mm/min. Suitable for
operation on 220 V, 50 Hz, single phase, AC supply.
Triaxial Cell for testing specimens of size 38mm dia x 76mm long
Top loading pad, Perspex, 38 mm dia. 1 No.
Plain Perspex disc 38mm dia x 6 mm thick 1 pair.
Porous Stone 38mm dia x 6 mm thick. 1 pair.
Sheath stretcher for 38 mm dia specimen 1 No.
Two way split former for 38 mm dia specimen 1 No.
Rubber sheath for 38 mm dia specimen 12 Nos.
Drainage tube (short), 38 mm 4 Nos.
Drainage tube (long), 38 mm 4 Nos.
‘O’ rings for 38mm dia specimen 4 Nos.
Split Mould, 38mm dia 1 No.
Top loading pad 38mm (plain) 1 No.
Triaxial Electronic Conversion Kit
Digital Indicator
Mode of Display : Micro controller multi line alpha numeric VFD
Qty
1
display for all simultaneous channel
Power supply Voltage : 220V, 50Hz, Single Phase
Load Cell
Capacity : 10 kN
Max. overload capacity : 10% of the rated
Load Cell excitation : 5 V, DC
Resolution : 0.01 kN
Sensing element : Strain gauges in full bridge configuration
Pore Pressure Transducer
Capacity: 20 bar (20 kg/cm2).
Max. overload capacity : 150% of rated
Pressure Cell Excitation: 5V, DC.
Resolution: 0.01 bar (0.01 kg/cm2).
Sensing element: Strain Gauges in full bridge configuration.
Displacement Transducer
Range : 0-20 mm
Sensing element : LVDT
Equipment should be quoted complete in all respects with necessary
software
2
Consolidation
Test
Apparatus, Electronic
3 gang electronic, total pressure of 10 kg/cm2, fitted with transducer
modules and readout unit having 3-6 channels
Consolidation Apparatus, Three Gang Bench type Model, Electronic.
Ref. Standards : IS:2720 (Part-XV), IS:12287, BS:1377, ASTM D2435
To be supplied with the following:
1.
2.
i.
ii.
iii.
iv.
v.
vi.
vii.
No. of Loading Units mounted on frame 1 No.
Consolidation Cell Assembly should consist of the following:
Fixed ring with Guide ring 3 Nos.
Top Porous stone 3 Nos.
Bottom Porous stone 3 Nos.
Pressure Pad 3 Nos.
Channelled base with water inlet 3 Nos
Gasket 3 Nos.
Water jacket 3 nos.
1
viii Set of weights : 7 x 0.05 kg/cm2
5 x 0.1 kg/cm2, 6 x 0.2 kg/cm2,
ix
x
6 x 0.5 kg/cm2, 5 x 1.0 kg/cm2 1 3 1 3 1 3
Water Reservoir with plastic tube, T - connection and a pinch
cock 3 Nos.
Displacement sensor, 0-10mm complete with 3 m long cable
(side entry) mounting bracket 3 Nos.
3 Consolidation Indicator, Three channel 1 No.
To be supplied complete in all respects including the necessary
software to run the equipment.
3
C.B.R. Test
Electronic
Apparatus,
Ref: Standards: IS : 2720 (Part XVI), BS 1377; 1924; EN 13286-47/
ASTM D 1883; AASTHO T 193
1
Should be supplied with the following:
1.
2.
3.
4.
Table Top Load Frame, 50 kN Capacity, Three Speed 1.5,
1.25 & 2.5 mm/min. Light weight and Sturdy.
Mould - Gun Metal 150mm ID x 175 mm H – 1 No.
Perforated Base Plate - Gun Metal, for Mould – 1 No.
Extension Collar - Gun Metal 150 mm ID x 50 mm high
Penetration Piston 50 mm face dia – 1 No.
5.
6.
Adjustable Bracket for Penetration Dial Gauge
Circular Metal Spacer Disc, with detachable handle, 148 mm
dia x 47.7 mm high
7. Annular Metal Weight 2.5 kg, 147 mm dia with 53 mm dia
central hole
8. Slotted Metal Weight 2.5 kg, 147 mm dia, with 53 mm dia
slot
9. Perforated Plate 148 mm dia, with adjustable stem and lock
nut
10. Metal Tripod for Dial Gauge
11. Cutting Collar
12. Rammer 2.6 kg, 310 mm controlled drop
13. Rammer 4.9 kg, 450 mm controlled drop
14. Electronic Outfit for C.B.R. Test Apparatus consisting:
 CBR Test Indicator 1 No.
 Load Cell Universal Type 50 kN 1 No.
Displacement Sensor 1 No.
To be supplied complete in all respects including the necessary
software to run the equipment.
4
Direct Shear
Electronic
Apparatus,
Ref. Standards IS:2720 (Part 13), BS 1377, ASTM D 3080
Should be supplied with the following:
1.
2.
Shear Box Assembly – 1 set
This assembly comprises of :
1
 Halves of the Shear Box 2 Nos.
 Plane Gripper Plate 2 Nos.
 Perforated Gripper Plate 2 Nos.
 Porous Stone 2 Nos.
 Top Loading Pad 1 No.
 Base Plate 1 No.
3. Shear Box Housing with two linear bearing case with steer 1
No.
4. Specimen Cutter 1 No.
5. Surcharge Weights to attain normal stress of 3 kg/cm2 1 Set
6. This surcharge weight set comprises of following weights :
 0.05 kg/cm2 : 4 Nos.
 0.10 kg/cm2 : 1 No.
 0.20 kg/cm2 : 1 No.
 0.50 kg/cm2 : 3 Nos.
 kg/cm2 : 1 No.
Direct/Residual Shear Electronic Conversion Kit
To be supplied complete in all respects including the necessary
software to run the equipment.
5
Unconfined
Test
Apparatus, Electronic
Ref. Standards IS:2720 (Part 10), AASHTO T208
1
Supplied with the following:
 Load Frame 3 speed 50 kN
 S type load cell of 2 kN
 Digital Indicator 1 No.
 Displacement Transducer, 1 No
 Plain Platen with adaptor
 Split Mould 38mm dia x 76mm long
Rubber Sheath for 38mm dia
To be supplied complete in all respects including the necessary
software to run the equipment.
6
Swell Pressure Apparatus
Should be supplied with the following:
1
1.
2.
Load Frame, Hand operated, Capacity 5 kN
Mould 100 mm dia x 127.3 mm height (1,000 ml volume)
with base plate and collar.
3. Proving Ring, 2.5 kN capacity.
4. Dial Gauge 25 mm travel, 0.01 mm least count.
5. Perforated Swell Plate 100 mm dia x 16 mm thick.
6. Spacer 100 mm dia x 12.7 mm thick.
7. Pair of Porous Stones 100 mm dia x 12.7 mm thick.
8. Load Transfer Bar
9. Steel Ball
Soaking Tank, 250 mm dia x 210 mm high
Comlete in all respects to operate the equipment.
7
Permeameters: Constant
head falling head, granular
Ref. Standards IS:2720 (Part 17), IS:11209
1 each
soils
To be supplied with the following:
1.
Stand with three glass tubes of 6 mm, 10 mm and 20 mm dia
approx.
2. Metallic Mould 100 mm dia x 127.3 mm height, 1000 ml
volume.
3. Extension Collar 100 mm dia x 60 mm height.
4. Drainage Base Plate with a recess for Porous Stone and an
Outlet Valve.
5. Metallic Clamping Ring
6. Drainage Cap with recess for a Porous Stone and fitted with
Inlet Valve and Air Release Valve.
7. Dummy Plate to serve as False Bottom during compaction.
8. Porous Stone for Drainage Base Plate.
9. Porous Stone for Drainage Cap
10. Rubber Connection Tube 3m long, with Pinch Cock
11. Overhead Tank, made of steel, approx, 37.5cm dia x 1m high
12. Rammer 2.6kg x 310mm controlled drop.
Rammer 4.9kg x 450mm controlled drop
Complete in all respects to run the equipment.
8
Equipment
Sedimentation
Analysis
for
Sedimentation Analysis Apparatus Andreasen Pipette Stand)
2
Plummet Balance Ref. Standards IS:2720 (Part II), BS:1377
Complete with the following:
1.
2.
3.
Andreasen Pipette, Glass, 10ml. capacity
Sedimentation tube, Glass, 500ml. capacity
High Speed Stirrer New Model, Ref. Standard IS:2720
(Part 4), Dispersion Cup and Baffle
Plummet Balance, Ref. Standard IS:2720 (Part 4)
9
Gas Jar Apparatus
Specific Gravity
for
10
Constant Pressure System
1litre capacity, complete with rubber bung and glass cover, should be
capable of rotating two jars at appx. 50 rpm
2
Constant Pressure System, oil water type with two cells. The
system should consist of an oil pump, driven by an electric motor
during the entire period of operation to maintain the desired pressure.
The unit should be able to provide variable pressure upto 16 bar which
can be increased or decreased simply by turning a control knob. A
transparent oil water interchange vessel should be provided to transmit
water pressure to the test apparatus. Should be supplied complete with
Pressure Gauge, Flow Valves, connecting Pressure Hose. Suitable for
operation on 220 V, 50 Hz, Single Phase, AC supply.
1
Range : 10 kg/cm2
Resolution : 0.1 kg/ cm2
Accuracy : ± 1%of the indicated pressure
Department of Civil Engineering,
KNIT, Sultanpur
Environmental Engg. lab
Package Code- TEQIP-II/UP/UP2G05/69
PackageName- TEQIP-II/UP/KNIT/CE/GE/Lab/Shopping/03(R)
Earnest Money Deposit (EMD) – Rs. 6600=00
Delivery Period—45 days
S/N
1
Specifications
Name of
Equipment
Turbidity meter
For direct measurement of suspended matter (turbidity) in water samples,
Qty
02
(Nephlometer)
2
pH Meter
3
Colour Comparator
Range 0-1000 NTU in at least two ranges, accuracy: +- 2% full scale deflection,
power supply 220 VAC +- 25%, 47-53Hz, should include- ambient light shield;
spare tubes (6 nos.); stand for sensor; dust cover; instruction manual.
Digital display, range- 0-14, resolution 0.01, table model with probe and
automatic temperature control.
Colour comparator discs at Cobalt scale, as per IS specifications.
4
Conductivity meter
Range 0- 1000m Mhos/cm, accuracy: +- FS +- digit, Temp cpmpensation: 00
04
02 set
01
0
100 c, Temp accuracy: +- 1 c, calibration points: 2, pH buffer options: NIST
(4.00/6.86/9.18), Power supply: DC 9 V, AC adaptor: 220 V, 50 Hz. As per IS
specifications.
5
Digital
electronic
Capacity 500g, sensitivity: 0.001 g
01
Digital temp controlled, 15L capacity, double walled, Stainless/mild steel, Temp
01
balance
6
Water Bath
0
range from ambient to 100 c, complete with all the accessories and as oer
relevant IS specifications.
7
Kjeldahl Nitrogen
Assembly
Concealed hot plate type having unit of 6 plates, digitally controlled, rating 500
watts, , to be supplied with capacity flasks with red fume duct and pair of
hangers, should work on 220/230V
01
Department of Civil Engineering,
KNIT, Sultanpur
Surveying / Geoinformatics Lab
Package Code- TEQIPII/UP/UP2G05/4
PackageName - TEQIP-II/UP/KNIT/CE/GI/Lab/Shopping/04
Earnest Money Deposit (EMD) – Rs. 28500=00
Delivery Period—45 days
S.No.
Name of Equipment
1
Vernier Theodolite
Specification
Quantity
1. 20 seconds least count
10
2. with Tubular Magnetic Compass
3. with Optical Plumbing Arrangement complete in Teak
Wood box
4. Telescopic Stand of extruded aluminium section with water
proof cover
2
EDM
Range
500 m
Accuracy
± 1.0 mm
2
Units of Measurement metric and fps system
Battery Life
3
Digital electronic Theodolite
15000 measures
5
Telescope
Image
Erect
Magnification
30x
Objective Aperture
45 mm
Minimum focussing dist.
1.4m
Stadia Ratio
100
1.
Angle Measurement
Encoder System
Absolute Encoding
Display Resolution
1” or 5”
2.
Display
Display side large charater back light lit LCD 6 Nos touch
button functions
Angular Accuracy
2”
Display Units
DEG/ MIL/ GON
3.
Compensator
Inclination Sensor
Automatic Vertical
Compensator Range
+/- 3’
4.
General Specifications
Plummet Type
Laser
Plate Vial Accuracy
30”/2 mm
Circular Vial Accuracy
8’/2 mm
Operating Temperature
-200C to +500C
Battery Backup with AA4 cell- 80 Hours
Standard Accessories to accompany the machine
1.Quick Charger -1no
2.Rechargeable battery -1no and 1 battery AA4 cell Type
3. tool kit
4. aluminum tripod -1no
5. manual
6. rain cover
Desirable Features:
Absolute Encoding
High intensity laser plummet system
Simplified user interface
Big LCD display for easy read-outs
High resolution telescope
Option to use with rechargeable alkaline batteries
Premium quality tribrach base with detachable
Detachable handle for measuring wide angles
4
Total Station
2
(A)
1.
Telescope
Image
Erect
Magnification
30x
Objective Aperture
40 mm
Minimum focussing dist.
Less than 1.8m
10 30’
Field of View
2.
Angle Measurement
Accuracy
1”
Least Count
0.5” or better
Angle Method
Absolute Encoder
3.
Distance Measurement Range
Range with Prism
5000 mor better
Range without Prism
1000 m or better
Accuracy with Prism
2 mm ±2 ppm XD
Accuracy without Prism 5 mm ±2 ppm XD
4.
Compensator
Dual Axis Compensator
Compensator Range
5.
+/- 3’ or better
General Specifications
Plummet Type
Internal Memory
Laser
40000 points or 256 MB
External Memory
64 GB
Battery Backup
36 Hours
Operating Emperature
-200 C to +500 C
Humidity
95% non condensing
Dust and Wter Protection IP 55
Keyboard
Colour touch screen on both sides with
Alphanumeric keyboard with graphical display of survey data
with zoom in zoom out facility import and export dxf/csv, raw
file etc
On board Software Data downloading software with all the
civil engineering capabilities (area calculation, volume
calculation, contouring, level plotting, etc.) as basic features
and also compatible with AUTO CAD
Data Communication via Bluetooth, pen drive, USB data cable
as standard features
Standard Accessories to accompany the machine Tripod,
Pole, prism, Charger, battery, rain cover, data cable,
downloading Software, Pen drive
(B) Surveying Software
5
Hand Held GPS
Inbuilt CAD Platform Import Data from Total station, Auto
Level, Theodolite. Automatic generate contour, grid Plan, L-X
section, Symbol library, Area/Volume, 3D view, traverse
Adjustment by Least square & Bowditch Calculator Lat/long
data to UTM to Lat/Long












Capable of showing instant longitude & latitude. 2
Built in Barometric Altimeter & electronic compass
Battery operated : two AA size battery with 18 hours
life typical.
Color display: 256 colour TFT: 2.2 X 1.6 inch (min)
Receiver Sensitivity: high
Accepts Micro SD card ( min 2 GB included)
More than 100 plus user datums
G-Sensor, E-Compass
USB cable and software for USB & serial interface,
computer cable(if any), user manual & other
accessory.
carrying case
waterproof casing (IP X 7)
Warranty: min 1 year.
5
Department of Civil Engineering,
KNIT, Sultanpur
Hydraulics / Fluid Mechanics Lab
Package Code- TEQIPII/UP/UP2G05/5
PackageName - TEQIP-II/UP/KNIT/CE/FM/Lab/Shopping/05
Earnest Money Deposit (EMD) – Rs. 5000=00
Delivery Period—45 days
S.No.
Name of Equipment
Tilting Flume
Specification



1


Flow Visualisation
Apparatus


2

Self containing water circulating system with
single phase operation
Section 250X200mm, min. 5 m length
Can provide 1 in 25 slope on upward and
downward slope
Having measuring arrangement for flow
velocity
With
notches,
weir,
venture
flume
experimental setup for hydraulic jump and
other models for conducting experiment of
Open Channel Flow
Made of Perplex sheet
Operational with hydraulic bench setup for
visual observation on a very low Reynold’s
number
of Flow pattern around aerofoil, circular,
triangular and sure models
Quantity
1
1
Department of Civil Engineering,
KNIT, Sultanpur
Concrete / Materials Testing Lab
Package Code- TEQIPII/UP/UP2G05/6
PackageName- TEQIP-II/UP/KNIT/CE/MT/Lab/Shopping/06
Earnest Money Deposit (EMD) – Rs. 8000=00
Delivery Period—45 days
S.No.
Name of Equipment
Cement Tensile Testing
M/C
Specification
Ref. standard - EN-196-1
Quantity
1
Loading speed of the single lever system: 10 +/- 2 N/Sec
Loading speed of the double lever system: 50 +/- 10
N/Sec
Flexure jaw diameter of the loading roller: 10mm
1
Supporting roller diameter: 10mm
Supporting roller distance: 100mm
Baffle plate span: 46mm
Accessories:
Briquette mould, single gang with steel base plate
Compression Testing
M/C
Capacity-2000kN, electrically operated with three load
gauges 2000kN, 1000kN, 500kN, to be supplied with in
house NABL Calibration Certificate.
The machine should conform to IS: 516 and IS: 14858
and to be supplied with the following:
Solid Welded Loading Unit.
Pumping unit electrically operated.
2
Suitable set of spacers.
Least count: 10kN
Maximum Clearance Between Platens: 370mm
Maximum Distance Between Side Plates: 340mm
Platen Size: 222.0mm
Piston Dia: 222.2mm
1
Piston Stroke: 50mm
Used to test sample sizes: 100mm, 150mm cube and
100mm, 150mm dia cylinder.
Work on Single Phase AC, 230 V
Concrete Test Hammer
Ref. Std: IS:1331 – 1992 (Part 2) & ASTM C805, D5873
1
Measuring Range: 10 to 70 N/mm sq.
3
Impact Energy: 2.207Nm
Supplied with carrying case, grinding stone and operating
manual with calibration certificate
Concrete core drill
Suitable for operation on 220V, 50Hz, Single Phase, AC
supply.
The equipment consist of the following replaceable
parts :
4






Electrical drill for core case 1 No.
Feed Assembly 1 No.
Hammer drill 8 mm
Anchor bolts 1 Set
Rubber coupling for core case 2 Nos.
Clamp for holding water jacket 1set
Nut & bolts 15 Nos.
Accessories:
1.
2.
3.
Core Bit and Water Jacket 25mm dia x 75mm
long
Core Bit and Water Jacket 38mm dia x 100mm
long
Core Bit and Water Jacket 50mm dia x 100mm
long
1
Department of Civil Engineering,
KNIT, Sultanpur
Transportation Engineering Lab
Package Code- TEQIPII/UP/UP2G05/7
PackageName-TEQIP-II/UP/KNIT/CE/TE/Lab/Shopping/07
Earnest Money Deposit (EMD) – Rs. 8000=00
Delivery Period—45 days
S.No.
1
Name of Equipment
Motorised Bitumen
Extractor
(A) Cannon-Manning
Viscometer
(Complete Absolute
and Kinematic viscosity
testing equipment)
Specification
1. Centrifuge type
2. Capacity 1500 gms
3. 230 Volts A.C. single phase
The equipment consists of the following:
Ref. as per IS 1206 Part I and II






2






(B) Electronic
Vacuum
Regulator
Canon Manning Capillary Tube of sizes 12 & 13 : 1
No. Each
Canon – Fenske Capillary Tubes of sizes 350 & 400.
1 No. Each
Kinematic Viscometer Bath with a provision for 6
tests.1 No.
The accuracy of viscometer bath is + 0.1 Deg. C.
Vacuum pump.
1 No.
Thermometer of IP – 5C of a range: 2 Deg. C to 300
Deg. C.1 No.
Thermometer of IP – 64C of a range: 20 Deg. C to
102 Deg. C.1 No.
Silicone Oil 25 Ltr. : 1 Can
Digital Stop Watch, range 0.01 sec.: 1 No.
Viscometer holder: 6 Nos.
Heat Resistance Gloves
: 1 Pair
Silicone Rubber Pipe : 1 Meter
Work on 220V AC Supply.
1.
2.
3.
4.
5.
Single lug for pipe connection
Sensor built inside housing
8 kind of units display
Recording of max and min readings
Data storage
Quantity
1
1
Department of Mechanical Engineering,
KNIT, Sultanpur
Engineering Mechanics and Material Testing Lab
Package Code- TEQIP-II/UP/UP2G05/65
PackageName - TEQIP-II/UP/KNIT/ME/EMMT Lab/Shopping/01(R)
Earnest Money Deposit (EMD) – Rs. 37550=00
Delivery Period—45 days
S.No.
1
Name of Equipment
Specification
Quantity
Universal Testing Machine
Computerized, Capacity,
600 kN computer controlled
supplied with Double shear
Attachment, Extensometer
with compatible software
and all accessories
 For Testing TMT bar and re-inforcement bar.
 For Testing of bar from 10 mm to 45 mm.
 Bend Test facility
 Yield Stress test.
 Ultimate Tensile Strength Test.
 Elongation.
Features: Hydraulic Grips, Front Loading, 6 Pillar Frame for
more stability, Fully automatic control, Touchscreen Interface
01
Type
6 pillar/Column type Load
frame for 600kN
Capacity
600kN
Loading
Front Loading
Resolution
0.01kN
Max Clearance for Tensile
Test
50-700mm
Max Clearance for
Compression Test
0-700mm
Effective Clearance between
Columns
585mm
Ram Stroke
20mm
Straining/piston speed at no
load
0-80mm
For Tension Test
10-25mm
Clamping jaws for round
specimens
20-45mm
45-60mm
Clamping Jaws for Flat
Specimens thickness
0-22, 22-44, 44-65mm
Flat Specimen Width
70mm
For Compression Test
220mm
Pair of compression plates
For Transverse Test:
Table with the adjustable
pillars
140mm
Width of rollers
45mm
Dia of rollers
700mm
Max Clearance between
supports
16mm, 22mm
Radius of Punch Tops
2
Brinell cum Rockwell
Hardness Tester
Calibration Counts
20000 Counts
Crosshead Gear Motor
1 HP
Power Pack Motor
3.0HP
Dimensions
860 x 580 x 2260
Weight
4500 KG approx.
Grips
Hydraulic
Interface
Touchscreen type
Control
Load Control
Storage
Via USB
Software
Compatible data analysis
and reporting software


Sturdy & Reliable Design and easy to operate
Accessories should be part of Brinell & Rockwell as
standard outfit.
 Direct reading of Rockwell scales HR-ABC
 Samples upto 230mm high and 155mm Throat depth can
be used
Rockwell Scales – A,B,C Brinell Hardness, Hardness
Resolution – 1.0 of a Rockwell unit
Test Loads :Rockwell – 10 kgf Pre Load/60, 100, 150 kgf
Main Load, Brinell – 10 kgf Pre Load/187.5 kgf Main Load
,Display: Analogue, Accuracy – Conforms to IS 1586 – 2000
(2006)
01
Specimen accommodations: Vertical space – 230mm ,
Horizontal space (from central line) – 155mm
Machine Specifications: Machine Dimensions:- 655mm (H) x
170mm(W)x475mm(D), Machine Wt. – 85 Kg (approx.)
Power Supply – 220V, 1 Ph, 50Hz
3
Fatigue Testing Machine
200kg
4
Impact Testing Machine
5
 Compact simple, light weight
 Table Top model
 Load changing simple – through lever arrangement
Maximum bending moment: Kg.cm – 200, Bending moment
adjustable: Kg.cm – 25-200,Ranges: Kg.cm – 5-125,
Kg.cm – 125-200, Gripping dia of specimen: mm – 12,
Testing dia of specimen: mm – 8, Rotating Speed: rpm – 4200,
Accuracy of applied bending moment: +1%, Digital counter :
8 digit ,Power required: HP – 0.5, Main Supply: 3 Ph, 415V,
50Hz, A.C. ,Overall Size (approx.): mm : 1000L x 500W x
600 H , Weight (approx.): Kg : 120
01
01
Universal Force table
Charpy : 300 Joule
Izod : 170 Joule
MACHINE Should Conforrms to IS 3766-1977, IS
1598-1977, IS 1757-1988 and BS 131 Part I, II, III,
IV standard
complete set with weight & Table
6
Belt Pully Experiment
Combine Coil & Belt Friction Apparatus - With Weights
02
7
Inclined Plane Apparatus
complete set with weights
02
8
Screw Jack Experiment App
Complete Set
02
9
Bell Crank lever
Experiment Models
Complete Set
02
10
Apparatus for Reaction at
support
Complete Set
04
11
Simple Jib Crane
Complete Set
02



03
Department of Mechanical Engineering,
KNIT, Sultanpur
Material Science and Testing Lab
Package Code- TEQIP-II/UP/UP2G05/68
PackageName – TEQIP-II/UP/KNIT/ME/MST Lab/Shopping/02(R)
Earnest Money Deposit (EMD) – Rs. 27600=00
Delivery Period—45 days
S.No.
Name of Equipment
Torsion testing machine
Specification
Capacity: 100 N m .Least count : 0.01 N m, Max clearance between grips: 500 mm
Quantity
01
Grips for square specimens: 5- 15 mm, Grips for flat specimens: 5-12×40 mm
2
3
4
5
Corrosion Analyzing
Instrument
Corrosion Analyzing Instrument Configuration with Rod Electrode ,carrying strap,
protection sleeve for indicating device, transfer cable, USB-serial adapter, operating
instructions, carrying case Rod Electrode accessories Rod electrode with spare parts,
electrode cable 1.5 m (4.9 ft.), cable coil 25 m (82 ft.), PC software on memory stick,
bottle with copper sulphate 250 g
01
Rectangular Muffle
Furnace





Light weight with ceramic fiber wool installation in place of refractory bricks.
Working temperature 1150°C Max. temp 1200°C
Fitted with Temperature Control Programable and PID auto Control.
Heating element are made up of kanthel wire.
Workable on 220V AC 50Hz Single Phase. Inner Muffle Size 300 x 150 x
150 mm.
01
Metallaurgical
Microscope Trinocolor
Computarized with Image
analyser with Compatible
software with all
accessories


Observation Head Inclined at 45°.
Incident light through epi-illuminator, Halogen Bulb 6V 20W controlled by a
variable intensity control knob.
Precise quadruple revolving nosepiece. Co-axial mechanical stage of x-y
movement of specimens upto thickness 65mm.
Must have Magnification Range from 40x to 2000x. for Visual Inspection and
Integrated with a good quality 3 MP Color Camera having Image analyzing
software dedicated for metallurgical application.
01
Metallurgical Microscope
Trinocolor


Rigid and stable body fitted with trinocular observation tube.
Bright field, incident light through epi-illuminator with centring provision,
iris diaphragm and a slot for dropping filters.
Quadruple revolving nosepiece for holding four objectives at a time.
Magnification required up to 1500x.
Must Include 100x Oil Objective.
01





6
End Quench Machine &
Jominy Fixture
To Test the Hardenability of steel. Bu End Quench Test
Vacuum metal melting
Furnace
Melt discharge system
Automatic Open / close mechanism
Power
6 kW
Max. temp
1000 oC
Working temperature
900 oC
Operation
THREE PHASE / AC /230V
Vacuum
10-2 torr
Water circulation
10 lit/min
7
8
9.
Double Disc Polishing
machine
Belt Grinder (Polisher)
Stable and rigid construction, Variable speed as indicated on the front fascia. Water
faucet arrangement & paper holding band., Suitable for wet/ dry grinding. Fitted
with high torque AC Motor. , RPM upto 1400, RPM control by potentiometer. , 8" disc
Dia.
Table Model Suitable foe coarse grinding of metal samples. , Fitted with Motor – ½
01
01
01
01
HP – Single Phase with Dust Tray., Working Window – 4” X 7”, Must Have Emry
Belt – 100mm X 915mm.
10
Grinder




Double disc abrasive wheel grinder
Single phase motor
Capacity 0.75 to 1.5 kW
Speed from 2500 to 3000 rpm
01
Department of Mechanical Engineering,
KNIT, Sultanpur
Mechatronics Lab
Package Code- TEQIP-III/UP/UP2G05/64
PackageName – TEQIP-II/UP/KNIT/ME/Mechatro.Lab/shopping/11
Earnest Money Deposit (EMD) – Rs. 34800=00
Delivery Period—45 days
S.No.
Name of Equipment
Specification
Quantity
1
Temp. Development
trainer system
Temperature sensors Lm35,RTD, THERMISTOR, and J type thermocouple sensor,
Switches facility to switch from one sensor to other, The Software for output of the Temp.
Data into Excel Sheet and Plots the Waveforms for Real Time Variable Data.
1
2
Strain gauge
development trainer
Rectangular foil type strain gauge sensor 350 ohm Bonded on a cantilever and flexible
metal strip , connected in wheat stone bridge configuration Operational amplifier and
signal conditioning circuit , LCD 16*2 based unit to display load status , Test points to
measure different signals and voltage
1
3
Load cell trainer system
Capacity of 10kg, Easy to plug and play unit
Power ON/OFF switch with Led indication Operational amplifier and signal conditioning
circuit , LCD 16*2 based unit to display load status.
1
4
Humidity trainer
development system
Humidity sensor module with resistance type, Linear dc Output voltage for 0-100% RH,
The System having the Facility to Log the Data into PC using USB PC interface..
1
5
Proximity trainer
development system
Platform to learn metal detecting facility using proximity metal detector, DC Motor
Mechanism to produce RPM, RPM Count Display facility to observe count results,
Switches Control to Control Direction and Motor Speed, Voltage Control Variac to
speedup, Speed down the Counts, speed, Usb Support to Program the Hardware and
Software changes.
1
6
Colour sensor
development trainer
RGB color sensor. Which can detect different color up to 10 color , On board color strip
provided for experiments, The System having the Facility to Log the Data into PC using
USB PC interface.
1
7
Ultrasonic distance
measurement trainer
Range:6 inches to 15 inches
Accuracy: 1 inch
On Board 5 V Supply
16*2 LCD Display
The System having the Facility to Log the Data into PC using USB PC interface.
1
8
Acceleration
measurement trainer
Onboard3.3V Low Drop Voltage regulator with input range of 3.6V to 6V.
Supply Voltage(Vdd):2.2V to 3.6V@400uA
Sleep mode Current:10uA
1
system
Sensitivity:1.5g:800mV/g
6g:206mV/g
Data Logger with 8 channel
Memory Card for Storage of data using FAT32 Protocol
High rate/Low rate/Trigger Mode/Channel Selection/Buccer Alarm options are
available
600 samples per second to 1 sample per week
Build in Real Time Clock
AC and DC both supply are supported with Battery Facility
Data Output in ms Excel sheet ach records are stored with time and Date Stamp
Real Time Variable Data Logging
4*4 hex keypad and menu driven system to operate the trainer
20*4 LCD Display
Size::162x122x65mm
Enclosure::Hand Held/Wall Mountable.
This Data Logger is PC independent and can be used in Field using its Battery Backup.
9
Portable data logger
2
10
Pressure measurement
trainer
On board pressure sensor kits, with 2 PSI fs, Output is ratio metric to the power supply.,
Facility to generate and monitor pressure on LCD Display , The System having the Facility
to Log the Data into PC using USB PC interface.
1
11
PC based data acquisition
system
Facility for external signal interface with Potentiometer.
1
12
Universal transducer
development board
On board: -LVDT , Microphone, Hall Sensor, Strain Gauge, Ultrasonic Trans receiver,
Temp Sensor(Lm35, NTC, Thermocouple), Humidity sensor ,Buzzer, Voltmeter (0-20v)
Generate square wave of 5v with 555 timer.
1
13
LVDT measurement
trainer system
AC-AC spring loaded 20mm LVDT, PIC microcontroller based system, LCD 16*2
display unit to show LVDT output results , 4.2KHZ Frequency generator with test
points to adjust frequency, Test points for test LVDT calibration using millimetre.
1
14
Touch panel trainer
system
Touch sensor , Output Reading Rate Every 50 Mili Seconds Data Format (fixed length)
22 Byte ASCII The baud rate of output is 9600 bps. It output X,Y and Z values The
XY are co-ordinates of touch and Z is pressure value, Working Voltage 3-5 V DC
1
15
Water flow trainer system
Turbine flow control sensor , 1~12 L/min Flow rate range measurement, Flow control
provision, input flow diversion through valves, Flow rate display unit, On board BNC
socket for CRO connectivity, Provision for measurement of frequency and test points to
measure voltage using Multi meter, Durable water container and water pump
1
16
DC brushless motor
trainer kit
24V/40W DC BLDC motor with Driver, Having Facility of Control by Internal Driver
or Externally by Controlling Switch, Selector Switch for Internal or External Control.
1
17
DC stepper motor trainer
kit
Inbuilt Power Supply of 24VDC/2.5A, Dual Channel 24VDC Stepper Motor Driver and
motor, Switches for controlling the step angles, Switch to control speed and directions
Torque range from 0.5 N m to 3 N m.
1
18
Advance plc trainer
system(analog and digital)
with experimental
modules
Advance PLC (Programmable Logic Control) with Analog Input/ output
Configurable to both 24V DC & 230V AC
1
19
Anemometer system
Hydro-Thermo-Anemometer with UV Light Sensor
1
20
Advance programmable
microcontroller
development
package(8,16,32 bit)
Facility for 8,16,32 Bit processors, with debugging facility and programming.
1
21
Interfacing module
Accelerometer sensor interface on board accelerometer sensor with ±1.5g, ±6g. Three
axis Accelerometer Module and the necessary components required for the
accelerometer.
1
22
Programmable Aurdino
Development package
With various sensors, development boards, practice PCBs USB programming etc. The
total package must contain various arduino family boards , like ardunio uno and mega ,
Along with various shield Like ETHERNET , WI-FI , Bluetooth , wireless shield,motor
shield along with a ,Set of zigbee ( 5 nos ) , GSM , GPS modems , RFID (5 NOS )
Modems Microcontroller ATmega328 Operating Voltage 5V Input Voltage 7-12V
Input Voltage 6-20V Digital I/O Pins14 (of which 6 provide PWM output) Analog
Input Pins6 DC Current per I/O Pin40 mA DC Current for 3.3V Pin50 mA Flash
Memory32 KB (ATmega328) EEPROM1 KB (ATmega328) Clock Speed16 MHz The
system also provide 4x 4 materix key pad, RTC with battery back-up.
1
23
Robotics development
systems
Arm hardware, gripper, and gripper attachment kit,ssc-32 servo controller,DB9
SERIAL cable with USB Conversion with regulated wall pack adaptor having RIOS
arm Control Software for SSC-32..
1
24
Electro pneumatic timer
PLC based trainer system
Manifold 4 Port 1/4" BSP Female, Plasic Silencer 1/8" BSP Female Spares, Mini
Lubroet with Pressure Gauge female , Pressure Gauge 40 MM dial , Male Connector
1/4"X8mm,5/2 way internal Pilot operated spool single solenoid valve 1/4" BSP Female
1
5/2 way internal Pilot operated spool single valve 1/4" BSP Female, 5/3 way internal
Pilot operated spool type double valve 1/4" BSP Female, 5/3 way internal Pilot operated
spool type double solenoid valve 1/4" BSP Female, 3/2 way internal pilot operated
spool type solenoid valve 1/4" BSP Female, Swivel flow control valve, Single Acting
Pneumatic Cylinder, Double Acting Pneumatic Cylinder
25
Solar energy acquisition
trainer system with
applications
3 high performance photovoltaic cell panel , with a typical power of 12W for a 12Vdc
voltage. , Solar Panel mounted on an anodized aluminium structure with wheels for
mobility, and with calibrated cell to measure solar radiation.
1
Maximum nominal power: 10W. , Voltage at maximum power point (Vmpp): 36.0 V,
Current at maximum power point (Impp): 0.33 A., Charge controller 12v dc,invertor
14v, 220 Volt Ac,12v dc loads to study load test, Battery offering optimal performance
with low, power applications. Capacity12V : 7Ah, Measurement Of Intensity::32000
Lux
26
PC based sensor trainer
system
DC Voltage Supply-+-5V, 12V., On Board Amplifier , On Board Speed Measurements
Sensor, LCD 16*2, On Board Ardiuno, USB PC Interface, For Taking Data to the
Matlab or Labview. , On Board Test Points are Provided, With a set Of Interconnecting
Cables, CD Containing User Mannual in soft form as well as in Hard Form.
1
Department of Electronics Engineering
KNIT- Sultanpur
Package Code- TEQIPII/UP/UP2G05/70
PackageName-TEQIP-II/UP/KNIT/EL/Comm.Lab/Shopping/05(R)
Earnest Money Deposit (EMD) – Rs. 22300=00
Delivery Period—45 days
S.No.
Name of Equipment
Specification
01.
Communication kits
Communication Kits(FM,ASK,FSK,PSK,QAM,QPSK, DATA
FORMATTING TECHNIQUES,EDAC)
Based on Xilinx Spartan 3E FPGA BASED
QAM/QPSK.,ASK,FSK,PSK, DATA FORMATTING KITS AND
EDAC TRAINER KITS. THESE SHOULD HAVE OPTIONAL
FACILITY OF REPROGRAMMABLE FEATURE.
8MB SPI Flash for FPGA reconfiguration.
Power supply with +1.2V,+ 2.5V,+3.3V,+ 5V,-5V.
8MHz Crystal oscillator.
On board Hardware Reset switch.
ADC (1 channel, 8 bit, 32MSPS).
DAC (1 channel, 8 bit, 11MSPS).
16x2 LCD Display.
Carrier Generation of 40KHz output with test point.
Digital Clock Generation of 4KHz output
Data Clock and serial data test point.
Test points to measure and test signals
On board programming facility through USB JTAG for
development.
24 bit Data generator Switches.
Tribit encoder with IQ Data generation.
Sine wave generation with 0degree, 90degree, 180degree,
270degree phases.
Selector switches for experiment selection.
On board differential encoder and decoder.
Facility for 8-QAM –modulator /Demodulation circuit using
programmable FPGA
Reprogrammable Based on the FPGA using JTAG Cable for
further Analysis
Videos and power point presentations should be provided for its
operations
SIMILAR ARE FOR THE ASK, FSK, PSK , DATA
FORMATTING, QPSK AND EDAC TRAINER KITS.
Sine Wave Generator
Provides Synchronized Sine waveform output ranging from 300Hz
to 3.4 KHz.
Provision for Amplitude adjustments provided.
FM Modulator, Reactance Modulator., Varactor Modulator.
FM Demodulator
Detuned Resonant detector, Quadrature detector, Fooster Seeley
detector
Ratio detector
Quantity
01
PLL detector
On-board features
Mixer/Amplifier provided to modulate noise before demodulation.
Transmitter frequency of 455 KHz.
Low pass filter with cut off frequency of 3.4 KHz
Switch Faults are provided.
Block Description Screen printed on glassy epoxy PCB.
Interconnections
All interconnections are made using 2mm banana Patch cords.
Test points are provided to analyze signals at various points.
All ICS are mounted on IC Socket.
Bare board Tested Glass Epoxy SMOBC PCB is used.
In-Built Power Supply of +5V / 1.5A, ±12V/250mA with Power
ON indication.
Attractive Wooden enclosures of Light weight Australian Pine
Wood.
Set of 2mm Patch cords for interconnections
User's Manual with sample experimental programs
Video and power point presentation Should be Provided with the
Trainer
02.
CDMA-DSSS
Developer
(Bit error rate measurement, DSSS& FHSS
Modulator/Demodulator
CDMA (DSSS)
















Direct Sequence Spread- Spectrum (DSSS) Modulator,
Demodulator
Programmable chip rates upto 10 Mchi p/s
Spreading codes:
Gold sequences (up to 223-1 chips) Maximal length
sequences
(max length 223 -1 chips)
Barker codes (length 11, 13)
Code modulation: BPSK/QPSK/OQPSK with output
spectral shaping filter: Raised cosine square root filter with
20%, 25%, or 40% roll off.
Internal generation of pseudo-random bit stream and
unmodulated carrier for test purposes.
Built-in channel impairments generation:
Additive White Gaussian Noise
Frequency offset (Doppler)
Sequential code search
4-bit soft-quantized demodulated bits
Extensive monitoring:
Receiver lock
Carrier frequency error
02
03.
Wireless/ Mobile
Communication Trainer
The system must be able to explore MOBILE applications
240 x 128 Graphical LCD, Video Tutorial and soft manuial
Step by step training thru graphical LCD
Facility for learning AT command SET thru LCD Display
And 4 x 4 multiplexed keypad
Alpha numeric keypad for AT command SET
Fixed/variable SMS to any number thru keypad
RS-232 Serial interface
GSM Frequency 850 MHz
Based on Processor Core: 89V51
The system must be supplied with GSM Appliaction
The system will have all GSM modems , and with usb
Connectivity , for GPRS
Data transmission as well as the signal strength meaurement
system.
RF electromagnetic wave field strength measurements
• Mobil phone base station antenna radiation
power density measurement
• Radiation safety level tests
Facility to Locate RF "Hot Spots"
Facility for Microwave oven leakage tests
RF "Electrosmog" detection
Wireless network (Wi-Fi) RF detection
Sensor Type Electric Field
Frequency Range 50MHz to 3.5GHz
Units of Measure mV/m, V/m, µA/m, mA/m, µW/m2,
mW/m2, W/m2, µW/cm2, mW/cm2
Measuring Ranges 20mV/m to 108.0V/m
53µA/m to 286.4mA/m
1µW/m2 to 30.93W/m2
0µW/cm2 to 3.093mW/cm2
Resolution 0.1mVm, 0.1µA/m, 0.001µW/m2, 0.001µW/cm2
Audible Alarm Adjustable threshold with On/Off
Experiments Covered:Study of all AT commands for study of mobile communication.
Experimentation of call making, receiving, rejecting.
Experimentation of message sending, making, reading and
deleting .
Experimentatin of relay control with the help of message by
mobile
This Trainer basically explains the background behind the Mobile
which is involved in making calls with signal strength
measurenment system.
03
04.
Satellite
Communication Trainer
Specifications 2.42GHz synthesized source
Audio, Video & Data Link
Stand alone, Low cost system Simultaneous Communication of
three different signals at each up-linking frequency . 2414-2468
MHz PLL microwave operation . Crystal Control Frequencies .
Communicate Audio, Video, Digital data, PC data, Tone, Voice, .
Function generator waveforms . Communication of external
broadband digital and analogue data and base-band signals ,
Choice of different transmitting and receiving frequencies , Builtin microphone and speaker for Voice and Audio link , Detachable
Dish Antenna at each station , Facility to attach Analogue/Digital
02
communication kits
Peripherals














05.
Wireless Sensor
Network Kit
Uplink Transmitter
Downlink Receiver
Transponder
Helical Antenna(3 LHCP, 2 RHCP)
Video Camera
Video interface card
Microphone
Speaker
Audio/Video cables
Data cable for RS232 interface
AC power cables
PC Serial communication
Cables SMA (m) to SMA (m)
Software CD
The system should be based on arm7-2148 on IEEE 802.15.14
with a complete set of coordinators , routers , End device ,
intelligent end device with real time sensors , signal conditioners
etc the system must be supplied with win based utility software
for real time viewing , of the networks in star , ring and mesh
networks , and configuration of software Bee configured as per
bellow specifications) .Graphical Interface with packet Data Loss
for Analysis.
This wireless sensor network Deployment system consists of the
1 Co-ordinator and 2 non-intelligent end nodes, 2 intelligent end
nodes and 1 routers.
Zig Bee Coordinator ( at 2.4 Ghz & 866 Mhz range
)Supporting various Network Topology with
Zig Bee Coordinator
the coordinators must be designbed around advance processors
and must act as gateway with other wireless connectivity etc
Zigbee 2.4 Ghz/ 865 Mhz with external antenna
Coordinator based on ARM 7 LPC2148
Supporting various Network Topology with RF data rate 250
kbps/80 kbps
On board relays with isolated Output & one Buzzer for alarm
activation
On boards 20X4 LCD display for display for end device status
Facility to store the data SD Card for Storage
Data entry using 4X4 Hex Keypad digital Input
On Board USB Communication for PC Data transfer ,
Facility for switch selection for radio configuration , with /
without processors
On boards facility for GSM/GPRS & Bluetooth
For data transfer
On Board Power supply (5V, 3.3V)
with rechargeable battery back up, enclouser,
with configurable device software , for GUI based , along with
02
testing utility , RF data rate 250 KBPS
With software selectable Data rate, with input / output range 100Ft
/300Ft. for support of 2.4 ghz and 865 Mhz .With power supply
2.8V.
Zig Bee Intelligent End Devices
The Zig Bee Intelligent End Device with USB interface, with
ARM advance Processor Based
Zigbee 2.4 Ghz/ 865 Mhzwith external antenna
Supporting various Network Topology with RF data rate 250
kbps/80 kbps
On board 6V relays with isolated Output & one Buzzer
On board 16X2 LCD display.
4 digital Input
On Board Power supply (5V, 3.3V)
Can Connect with any digital Sensor* 0-5V or with analog sensors
,
The Zig Bee router Device with USB interface, with ARM
advance Processor Based
Zigbee 2.4 Ghz/ 865 Mhzwith external antenna
The device must act as router as well as intellgent device , with on
boards radio , and pc transfer
Supporting various Network Topology with RF data rate 250
KBPS,
With software selectable Data rate, with input / output range 100Ft
/300Ft.
With power supply 2.8V.
4Channel A/D,8 Digital Input / Output,2-PWM Output
Zig Bee Non Intelligent Device with sensors Zigbee 2.4 Ghz/
865 Mhz with external antenna.
On Board Configuration facility with USB
End Devices to connect with sensor* in range 0 to 3.3 V analog or
digital
On Board Power supply (5V, 3.3V)
Field deployable ready to use
USB Powered/ Battery for zigbee
In Build features of Zigbee for 2.4 GHz:
Supporting various Network Topology with RF data rate 250 kbps
With software selectable Data rate, with input / output range 10100* meter.
4 Channel 10 bit internal A/D, 8 Digital Input / Output
In Build features of Zigbee four 865 MHz:
Supporting various Network Topology with RF data rate 80 kbps
With software selectable Data rate, with input / output range 1001000* meter
4 Channel 10 bit internal A/D, 8 Digital Input / Output
The system must be supplied with following sensors 2 unit , each
.
Sensors: tempo sensors , Humidity, PIR, vibration, Magnetic,
Smoke etc.
Note::--- 2.4 Ghz and 865Mhz modems can’t be communicate
with each other.
Department of Electronics Engineering
KNIT- Sultanpur
Package Code- TEQIPII/UP/UP2G05/30
PackageName-TEQIP-II/UP/KNIT/EL/Comm.Lab/Shopping/06
Earnest Money Deposit (EMD) – Rs. 21000=00
Delivery Period—45 days
S.No.
Name of Equipment
Specification
Quantity
01.
DSP Based Development
Boards
1 TMS320F2833x, TMS320F2823x DSCs
1.1 Features
123
• High-Performance Static CMOS Technology • Enhanced
Control Peripherals
– Up to 150 MHz (6.67-ns Cycle Time) – Up to 18 PWM
Outputs
– 1.9-V/1.8-V Core, 3.3-V I/O Design – Up to 6 HRPWM
Outputs With 150 ps MEP
• High-Performance 32-Bit CPU (TMS320C28x) Resolution
– IEEE-754 Single-Precision Floating-Point – Up to 6 Event
Capture Inputs
Unit (FPU) (F2833x only) – Up to 2 Quadrature Encoder
Interfaces
– 16 x 16 and 32 x 32 MAC Operations – Up to 8 32-Bit
Timers
– 16 x 16 Dual MAC (6 for eCAPs and 2 for eQEPs)
– Harvard Bus Architecture – Up to 9 16-Bit Timers
– Fast Interrupt Response and Processing (6 for ePWMs and 3
XINTCTRs)
– Unified Memory Programming Model • Three 32-Bit CPU
Timers
– Code-Efficient (in C/C++ and Assembly) • Serial Port
Peripherals
• Six-Channel DMA Controller (for ADC, McBSP, – Up to 2
CAN Modules
ePWM, XINTF, and SARAM) – Up to 3 SCI (UART)
Modules
• 16-Bit or 32-Bit External Interface (XINTF) – Up to 2
McBSP Modules (Configurable as
– Over 2M x 16 Address Reach SPI)
• On-Chip Memory – One SPI Module
– F28335, F28235: – One Inter-Integrated-Circuit (I2C) Bus
256K x 16 Flash, 34K x 16 SARAM • 12-Bit ADC, 16
Channels
– F28334, F28234: – 80-ns Conversion Rate
128K x 16 Flash, 34K x 16 SARAM – 2 x 8 Channel Input
Multiplexer
– F28332, F28232: – Two Sample-and-Hold
64K x 16 Flash, 26K x 16 SARAM – Single/Simultaneous
Conversions
– 1K x 16 OTP ROM – Internal or External Reference
03
• Boot ROM (8K x 16) • Up to 88 Individually
Programmable,
– With Software Boot Modes (via SCI, SPI, Multiplexed
GPIO Pins With Input Filtering
CAN, I2C, McBSP, XINTF, and Parallel I/O) • JTAG
Boundary Scan Support (1)
– Standard Math Tables • Advanced Emulation Features
• Clock and System Control – Analysis and Breakpoint
Functions
– Dynamic PLL Ratio Changes Supported – Real-Time
Debug via Hardware
– On-Chip Oscillator • Development Support Includes
– Watchdog Timer Module – ANSI C/C++
Compiler/Assembler/Linker
• GPIO0 to GPIO63 Pins Can Be Connected to – Code
Composer Studio™ IDE
One of the Eight External Core Interrupts – DSP/BIOS™
• Peripheral Interrupt Expansion (PIE) Block That – Digital
Motor Control and Digital Power
Supports All 58 Peripheral Interrupts Software Libraries
• 128-Bit Security Key/Lock
– Protects Flash/OTP/RAM Blocks
– Prevents Firmware Reverse Engineering
(1) IEEE Standard 1149.1-1990 Standard Test Access
Port and
4 Peripherals
The integrated peripherals of the 2833x/2823x devices are
described in the following subsections:
• 6-channel Direct Memory Access (DMA)
• Three 32-bit CPU-Timers
• Up to six enhanced PWM modules (ePWM1, ePWM2,
ePWM3, ePWM4, ePWM5, ePWM6)
• Up to six enhanced capture modules (eCAP1, eCAP2,
eCAP3, eCAP4, eCAP5, eCAP6)
• Up to two enhanced QEP modules (eQEP1, eQEP2)
• Enhanced analog-to-digital converter (ADC) module
• Up to two enhanced controller area network (eCAN)
modules (eCAN-A, eCAN-B)
• Up to three serial communications interface modules (SCIA, SCI-B, SCI-C)
• One serial peripheral interface (SPI) module (SPI-A)
• Inter-integrated circuit module (I2C)
• Up to two multichannel buffered serial port (McBSP-A,
McBSP-B) modules
• Digital I/O and shared pin functions
• External Interface (XINTF)
TMS320C6713 DSP Starter Kit (DSK)
 C6713 DSP Development Board with 512K Flash
and 16MB SDRAM
 C6713 DSK Code Composer Studio™ IDE including
the Fast Simulators and access to Analysis Toolkit
on Update Advisor
 Quick Start Guide
 Technical Reference
 Customer Support Guide
 USB Cable
 Universal Power Supply
 AC Power Cord(s)
 MATLAB compatible
Features
The DSK features the TMS320C6713 DSP, a 225 MHz
device delivering up to 1800 million instructions per second
(MIPs) and 1350 MFLOPS. This DSP generation is designed
for applications that require high precision accuracy. The
C6713 is based on the TMS320C6000 DSP platform
designed to needs of high-performing high-precision
applications such as pro-audio, medical and diagnostic. Other
hardware features of the TMS320C6713 DSK board include:
 Embedded JTAG support via USB
 High-quality 24-bit stereo codec
 Four 3.5mm audio jacks for microphone, line in,
speaker and line out
 512K words of Flash and 16 MB SDRAM
 Expansion port connector for plug-in modules
 On-board standard IEEE JTAG interface
 +5V universal power supply
Software - Designers can readily target the TMS32C6713
DSP through TI´s robust and comprehensive Code Composer
Studio™ DSK development platform. The tools, which run on
Windows© 98, Windows 2000 and Windows XP, allow
developers to seamlessly manage projects of any complexity.
Code Composer Studio features for the TMS320C6713 DSK
include:
 A complete Integrated Development Environment
(IDE), an efficient optimizing C/C++ compiler
assembler, linker, debugger, an a advanced editor
with Code Maestro™ technology for faster code
creation, data visualization, a profiler and a
flexible project manager
 DSP/BIOS™ real-time kernel
 Target error recovery software
 DSK diagnostic tool
 "Plug-in" ability for third-party software for
additional functionality
02.
Analog, Digital, Symbolic,
RF, HDL, MCU and MixedMode Circuit Simulation &
PCB Design Software
Simulation Mixed Signal SPICE 3F5/XSPICE mixedsignal circuit simulation (with PSpice® compatibility).
05
Signal Integrity – Schematic Level Pre-layout generation.
signal integrity analysis – includes full analysis engine, uses
defaults for PCB parameters.PCB – Layout High productivity
PCB Layout editor differential pairs, interactive/ auto
placement, pin/part swapping, obstacle avoidance during drag
operations. Signal Integrity – Layout Level Post-layout signal
integrity analysis supports reflection and crosstalk analysis
Schematic Viewer Open, view and print schematic documents
and libraries, PCB Viewer, Open, view and print PCB
documents, with 3D PCBs, Schematic – Soft Design Editing
All schematic and schematic library editing capabilities
(except in PCB Projects and Free Documents), netlist
generation, Simulation – VHDL VHDL simulation engine,
integrated debugger and waveform viewer, with third-party
support for ModelSim and Active-HDL. Schematic – Editing
All schematic document and library editing capabilities,
netlist generation, Library Management Unified library
management based on a single data store for all component
models and linked data such as 3D models, data sheets and
supplier links
03.
Miscellaneous
DSO, DMM, DFG,
Digital Multimeter:
Specification:
5 3/4-Digit Display (480,000 Counts)
Simultaneous Display of 3 Measurements, e.g. DC + AC +
Statistics
Up to 200 Measurements per Second
DC Basic Accuracy 0,015%
1 2 Measurements Functions: DCV, DCI, True RMS, ACV
and ACI, Frequency, 2- and 4-Wire Resistance, Capacitance,
Continuity, Diode Test, Temperature, Power R Crisp color
TFT display for excellent readability
Resolution: 1µV, 100 nA, 1mΩ, 1pF, 1Hz, 0,1 °C
True RMS Measurement AC, AD + DC
M athematic Functions: Limit Testing, Minimum/Maximum,
Average, Offset, DC Power, dB, dBm
Temperature Measurements with Platinum Sensors
(PT100/PT500/PT1000) R Data Logging in .CSV-Format to
Internal Memory or USB-Stick
Interfaces: USB-TMC and Ethernet (LXI in Preparation)
05 each
12.5 MHz Arbitrary Function Generator
Specification:
Frequency Range: 10­mHz…12.5­MHz Resolution:
5­digit,­max.­10­mHz Accuracy: ±(1­digit­+­5­m)
FrequencyRange: 10 MHz…12.5MHz R
Output Voltage:10mVpp-10Vpp (into
50Ω)
Waveforms:
Sine
Wave, Square Wave,
Triangle,
Pulse,
Sawtooth, and Arbitrary
Rise and Fall
Time: <10ns
Pulse width Adjustment:100 ns-80s
Arbitrary
Waveform Generator
40MSa/s
Burst, Gating, External Triggering,
Sweep External Amplitude
Modulation
(Bandwidth 20
kHz)
Intuitive Operation with one touch of
a Button
Quick Change of Signals
Isolated
USB/RS-232
Dual-Interface
60/70MHz 2/4 Channel DigitalOscilloscope
Specification:
R2GSa/s Real
Time, Low Noise Flash A/D Converter
(Reference Class)
2 MPts Memory,
Memory
oom
up to 50,000:1 MSO
(Mixed Signal Opt. O3508)with
8 Logic Channels Serial Bus Trigger and Hardware
accelerated
Decode incl. List View. Options:I2C +SPI +
UART/RS-232, CAN/LIN Automatic Search for User
defined Events Pass/Fail Test based on Masks
Vertical Sensitivity 1 mV/div. 12 div. x-Axis Display Range,
20
div.
y-Axis Display Range
(VirtualScreen) Trigger Modes:Slope,
Video,
Pulsewidth, Logic, Delayed, Event Component
Tester,
6
Digit
Counter, Automeasurement: max.
6 Parameters incl.Statistic,
Formula
Editor,
Ratiocursor,
FFT: 64kPts Fan:
Silence
redefined 3xUSB for Mass Storage, Printer and
Remote Control
Department of Electrical Engineering
KNIT, Sultanpur
POWER SYSTEM LAB
Package Code- TEQIPII/UP/UP2G05/32
PackageName-TEQIP-II/UP/KNIT/EE/PS/Lab/Shopping/01
Earnest Money Deposit (EMD) – Rs. 9900=00
Delivery Period—45 days
S.No.
Name of Equipment
Specification
Quantity
DC network Analyser
DC network Analyser
1
Transmission line model:
22V, 2Amp with different type of loads and meters
1
3
I.D.M.T. over current relay
With all accessories to determine its characteristics.
1
4
Distance relay study Trainer
with accessories like auto transformer ,meters and loading
rheostat / transformer
1
5
Percentage Differential Relay
with all accessories to determine is characteristics
1
Power Quality Analyzer
True RMS voltage, THD, power factor, VAR, power
harmonics voltage and current wave form
1
1
2
6
Department of Electrical Engineering
KNIT, Sultanpur
Package Code- TEQIPII/UP/UP2G05/33
PackageName-TEQIP-II/UP/KNIT/EE/ED/Lab/Shopping/02
Earnest Money Deposit (EMD) – Rs. 11800=00
Delivery Period—45 days
S.No.
1
2
3
4
Name of Equipment
Specification
Four quadrant dc motor
Converter control trainer
For single phase and Tree
phase circuits
Power Supply, Single phase: 230V, 50 Hz , Three phase: 400V, 50Hz, - Single phase
full wave/half wave controlled, Converter circuits,- Three phase full wave/half wave
controlled , Converter circuits, Dual converter, DC shunt/separately excited machine,
220V, 250W, 3000 rpm, Single phase switched capacitive load, 50 µF switched in
step of 10µF, Variable inductive load 230V,1A,600 mH,50Hz, Friction Brake torque
output in both directions up to 2Nm., Experimental manual
Voltage
Source
Inverter/PWM
Inverter
fed
Three
phase
induction motor control
unit
Input supply: Single phase: 230V, 50 Hz, Three Phase: 400V, 50 Hz, Voltage source
inverter, Three phase squirrel cage induction motor 400V, 1KW, 50Hz, Pendulum
machine with control unit suitable for Loading purpose, Gyrating mass 200 Kg cm2 ,
Experimental manual
Field Oriented Frequency
Inverter fed Three phase
induction motor control
unit
Input Supply: Single phase: 230V, 50Hz Three phase: 400V, 50Hz Field oriented
Frequency Inverter Three phase squirrel cage induction motor 400V, 300w, 50Hz
Friction brake suitable for loading purpose Experimental manual
AC Voltage controller unit
:
Single phase AC voltage controller with inductive load, Three phase AC voltage controller
with star/Delta , Connector load Burst Firing controller. Experimental manual
1
DC chopper unit
2.5 KHz GTO Chopper 10KHz Power Transistor chopper 5 KHz IGBT Chopper 15 KHz
MOSFET Chopper 400 Hz thyristor chopper DC shunt motor 220V, 300W, 3000rpm
DC stabilized power supply 220V, 5A DC tachogenerator Output voltage: ±
20V/1000rpm Experimental manual
1
1
5
6
SCR Commutation circuit
Trainer
Line commutation circuit Forced commutation circuit, Self commutation circuit Voltage
commutation circuit, Current commutation circuit Complementary commutation circuit
Experimental module of
modified series Inverter
Experimental module of modified series Inverter
7
Experimental module of
single phase three phase
current source inverter
Experimental module of single phase three phase current source inverter
8.
Quanti
ty
1
1
1
1
1
Department of Electrical Engineering
KNIT, Sultanpur
Package Code- TEQIPII/UP/UP2G05/35
PackageName-TEQIP-II/UP/KNIT/EE/VI/Lab/Shopping/04
Earnest Money Deposit (EMD) – Rs. 4200=00
Delivery Period—45 days
S.No.
1
Name of Equipment
Polarity tester
operated for CTs
battery
Specification
Polarity tester battery operated for CTs
Transducer Kits :
Thermo couple, strain gauge, LVDT, Load
cell, Thermistor, RTD with display unit
Process Instrumentation
Trainer
Process Instrumentation Trainer
3
Temperature Process
Control Trainer
Temperature Process Control Trainer
4
2
Quantity
1
1 each
1
1
Kamla Nehru Institute of Technology, Sultanpur
Central Shopping (A.C.)
Package Code- TEQIPII/UP/UP2G05/49
PackageName
TEQIP-II/UP/KNIT/AC/Shopping/02
Earnest Money Deposit (EMD) – Rs. 11000=00
Delivery Period—45 days
S.No.
Name of Equipment
AC with stabilizer
1
1.5 Ton AC with stabilizer
2
Specification
2.0 Ton Split AC ( Of Standard Make
with all specifications and Make
should be mentioned ) with
stabilizer (90-250V)
1.5 Ton AC ( Of Standard Make with all
specifications and Make should be
mentioned ) with stabilizer (90-250V)
Quantity
08
02
Kamla Nehru Institute of Technology, Sultanpur
CENTRAL SHOPPING (Furniture)
Package Code- TEQIP-II/UP/UP2G05/53
PackageName
TEQIP-II/UP/KNIT/CE/Furniture/Shopping/13
Earnest Money Deposit (EMD) – Rs. 3400=00
Delivery Period—45 days
S.No.
1
Name of Equipment
Computer Furniture
Specification
Quantity
Computer Table and Chairs
15 each
KNIT, Sultanpur
Package Code- TEQIP-II/UP/UP2G05/63
PackageName
TEQIP-II/UP/KNIT/Central/AV System/Shopping/4
Earnest Money Deposit (EMD) – Rs. 2000=00
Delivery Period—45 days
S.No.
1
Name of Equipment
Specification
Audio visual System
Audio visual System
Quantity
02
KNIT, Sultanpur
Package Code -
TEQIP-II/UP/UP2G05/57
PackageName - TEQIP-II/UP/KNIT/Central/Printer/Shopping/3
Earnest Money Deposit (EMD) – Rs. 2600=00
Delivery Period—45 days
S.No.
1
.
Name of Equipment
Specification
Printers
Laser jet Printers , B/w,12 ppm
Scanners
2
.
Scanner type : Flatbed
Resolution (dpi) : 2400 X 4800
Task speed -10 x 15 cm (4 x 6 in) color photo to file
(200 dpi, 24-bit, tiff): about 21 sec for single image scan
Quantity
10
02
KNIT, Sultanpur
Package Code-TEQIP-II/UP/UP2G05/56
PackageName -TEQIP-II/UP/KNIT/Central/Server/Shopping/2
Earnest Money Deposit (EMD) – Rs. 39200=00
Delivery Period—45 days
S.No.
Name of
Equipment
Server
1
.
Specification
Quantity
Quad Core Processor, 08 GB RAM, 1TB HDD, hot swappable redundant
power supplies must populated with at least 2 power supplies. with windows
server 2012
06
AMD OPteron 6100 series processor with quad core(or equivalent) or higher
High End
Server
The server should have hot-swappable, SAS, SATA or SSD drives with total
capacity of 1TB HDD . ,The server RAID controller should support the
following configurations RAID 0, 1, 5, 6, 10 , 50 and 60 support
Should have 64 GB memory expandable upto 256 GB,Support for advanced
memory redundant technologies like Advanced error-correcting code (ECC)
and memory mirroring , Should have 2 * 10 GbE Lan NICs for network
connectivity ,Rack mounted with rack mounting assembly
The integrated management controller should support web user interface for
server management; remote keyboard, video, and mouse (KVM); virtual
media; and administration with Virtual media support for remote KVM and
CD and DVD drives as if local
2
.
17” TFT Monitor Key Board Mouse , DVD writer, Should have the
following ports for server connectivity
● 1 serial port
● 2 USB ports
● 1 VGA video port
Supports hot swappable redundant fans
Supports hot swappable redundant power supplies must populated with at
least 2 power supplies., Operating Temperature support from 41 to 104°F (5
to 40°C) and Non-operating Temperature from -40 to 149°F (-40 to 65°C)
Operating Humidity from 10 to 90% non condensing , Loaded with Windows
server 2012. Original media CDs of windows server 2012 must be supplied
along the server.
Specifications Specifications mentioned are minimum higher specifications
are acceptable
02
KNIT, Sultanpur
Package Code- TEQIP-II/UP/UP2G05/51
PackageName - TEQIP-II/UP/KNIT/Central/DC/01
Earnest Money Deposit (EMD) – Rs. 45100=00
Delivery Period—45 days
S.No.
Name of Equipment
Laptop
1.
Specification
Quantity
LAPTOP Lastest version with i7 processor
Processor intel core i7, speed 2.4 GHz or above, RAM 8GB
DDR3 1600MHz, USB Port 2x 3.0 USB ports, HDMI port 1,
LAN 100/1000 Mbps, Wifi 802.11 b/g/n/ac, Hard disc 1TB
HDD, Bluetooth, Video Camera, Sound Card, Optical Drive
DVD R/w, Screen size 15” or above, Windows 8.1 Pro/
Windows 10 with o.s. media CD and driver CDS with laptop
carry case
41
Download