General
Specifications
Diaphragm Measurement Systems
For Use With DPharp Family of
Pressure Transmitters
GS SLC21A0-02E-A
■ GENERAL
Our remote seal Diaphragm Measurement System is
commonly used when process-operating conditions
extend beyond the normal operating limits of a pressure
transmitter. In addition, they are used to reduce the
weight of the device at the process connection,
particularly with conventional pressure transmitters.
The lightweight design of DPharp pressure transmitters
combined with a robust direct-mounting system provide
an excellent solution for both close-coupled and remote
seal applications.
For service where one or more of the following
conditions exist:
■ High temperature
■ Clogging potential
■ Frequent cleaning requirements
■ Aggressive or abrasive processes
■ ANSI flanged including flush and extended process
connections
■ NPT threaded process connections
■ Sanitary connections including aseptic, gpc quick
connect, tri-clamp, cherry burrell, and tank spud.
■ Saddle seal for welding into pipe line.
Materials of Construction
Lower Housing (Wetted)
Carbon Steel
Hastelloy C-276
Monel 400
316 Stainless Steel
316L Stainless Steel
Titanium - Grade 4
Tantalum Plate (Wetted
Surface Only)
Seal Process Connections
1/2" through 2" NPT,
1" through 4" flanged,
2-4-6" Extended Diaphragm,
3" to 12" Saddle Weld,
2" and 6" Tank Spud,
Triclamp, Cherry Bushell
and Aseptic Sanitary
Connections
The diaphragm is completely welded, with general
construction conforming to methods described in ASME
standard B20.2-1991 section 2.3.
Upper Housing
Carbon Steel
316 Stainless Steel
Monel 400
Titanium
Connection Ratings
150# RF
300# RF
600# RF
Sanitary
Diaphragm Materials
PTFE Lined 3166
Hastelloy C-276
Monel K500
316L Stainless Steel
Tantalum
Titanium
Flushing Connections
Single and Dual 1/4 NPT
Single and Dual 1/2 NPT
Capillaries and Connections
316SS Armored Capillary
316SS PVC Coated
316SS, 4" Cooling Element
Note: Not all wetted parts materials
are listed in the model numbers. Please
contact your Yokogawa Representative
for further informations.
Yokogawa Corporation of America
2 Dart Road Newnan, Georgia U.S.A. 30265
Tel: 1-800-258-2552 Fax: 1-770-254-0928
GS SLC21A0-02E-A
©Copyright 2004
2nd Edition 1/04
2
■ INTRODUCTION
Advantages include:
The direct-mount seal (DMS) system provides a closecoupled connection to DPharp digital pressure
transmitters meeting process connection requirements
in food and beverage, biotech, pharmaceutical, chemical,
and many other industries. When used with DPharp s
unique auto-level software feature, DMS transmitters
offer a lower cost of ownership than our competitors.
■ For level measurement
The DMS mounting system is designed for direct
mounting to any DPharp pressure capsule body, thus
maintaining standard sealing characteristics while
providing superior structural integrity. The process
connection itself is directly welded to the DMS flange,
thereby eliminating potential leak paths common to
threaded connections utilized on conventional
transmitters. Other DMS expanded capabilities include
a wide variety of exotic alloys and custom flanged or
threaded process connections.
• close coupling to the tank
• reduced temperature effect
• eliminates elevation/suppression calculations
• minimizes start-up and installation
■ For sanitary measurement
• close coupling to the tank, vessel or piping
• reduced weight
• reduced temperature effect
• minimizes start-up and installation
■ For application flexibility and compatibility
• variety of wetted materials selection
• variety of fill fluid selection
■ BENEFITS
Direct-mount systems eliminate the use of filled
capillaries leading to overall performance improvements
and a reduction in installation and maintenance costs.
Minimizing internal fluid volume reduces the amount of
temperature effect as a result of fluid expansion.
Eliminating filled capillaries reduces the need for
supporting mounting peripherals while greatly
minimizing start-up by eliminating the need for
calculation of suppression or elevation due fluid head.
Major DMS benefits include:
■ Direct-mount system for DPharp digital pressure
transmitters
■ Elimination of threaded connections at the
transmitter body
■ COOLING
ELEMENT
■ Maintains transmitter sealing
characteristics
■ Improved structural integrity over typical threaded
designs
■ Universal adaptation for a variety of industry
standard or custom process connections
■ Expanded offering or exotic alloys
2.75"
Available for selection on Threaded seals is a 4" cooling
element for direct-mount. Intended to protect the
EJA530/510 from high or low process temperature. Air
flow across heat exchanging fins reduces or increses the
temperature of the system fill fluid to protect the
transmitter.
The cooling element is recommended for process
temperatures approaching transmitter temperature
limits. It is direct mounted between the EJA530/510
and the diaphragm seal. Silicone fill is recommended.
Effective temperature reductions of 200°F depending
upon ambient conditions. All 316SS construction back
welded to stainless steel upper housing or flange.
3
Functional Specifications
(EJA Pressure Transmitters)
*Refer to specific General Specification for more data
Span and Range Limits (EJA110A)
Measurement
Span and Range
M
Span
Range
H
Span
Range
V
Span
Range
in H2O
4 to 400
-400 to 400
20 to 2000
-2000 to 2000
20 to 2000
-71 to 2000
Max Working
Pressure
2300psi
2300psi
2300psi
Span and Range Limits (EJA430A)
Measurement
Span and Range
A
Span
Range
B
Span
Range
psig
4.3 to 430
-15 to 430
20 to 2000
-2000 to 2000
Max Working
Pressure
430psi
Ambient Humidity Limits:
5 to 100% RH @ 104°F (40°C)
EMC Conformity Standards:
For EMI (Emission) — EN55011
AS/NZS 2460 1/2
For EMS (Immunity) — EN50082-2: 1995
Supply Voltage:
10.5 to 42 VDC for operation, 16.4 to 42 VDC
for digital communications.
Load:
0 to 1335 ohms for operation
250 to 600 ohms for digital communications.
Physical Specifications
(EJA Pressure Transmitters)
Bolting:
SUS630 Stainless Steel
Also available, SUH660S.S.
and SCM435C.S.
2000psi
Zero Adjustment Limits:
Zero can be fully elevated or suppressed,
within the Lower and Upper Range Limits of
the Capsule.
External Zero Adjustment:
External zero is continuously adjustable with
0.01% incremental resolution of span. Span
may be adjusted locally using the digital
indicator with range switch.
Stability:
±0.1% of URL per 60 months
Housing:
Low copper cast aluminum alloy with
polyurethane paint -standard
(Munsell 0.6GY3.1/2.0)
Epoxy paint or SS housing options available
Enclosure Classification:
JIS C0920 (Equivalent to NEMA 4X
and IEC IP67)
Weight:
8.6 lbs. (3.9 kg) without integral indicator,
mounting bracket and process connector.
Data Plate and Tag:
SUS304 Stainless Steel
Output:
Two wire 4 to 20 mA DC output with digital
communications, linear or square root
programmable. BRAIN or HART FSK
protocol is superimposed on the 4 to 20 mA
signal.
Also available, Digital Communication via
Foundation Fieldbus protocol.
Ambient Temperature Limits:
Approval codes may affect temperature
limits -40 to 85°C (-40 to 185°F) -30 to
80°C (-22 to 176°F) with LCD Display
Process Temperature Limits:
Dependent on seal type and fill fluid
selection.
Transmitter Capsule Limits:
-40 to 248°F (-40 to 120°C)
Cover O-Ring:
Buna N
4
Fill Fluids
We provide a wide array of fill fluids, which will encompass the majority of applications. Table 3 below shows the
fill fluids available and the physical parameters of each.
Code
A
B
C
D
E
F
G
H
J
K
L
M
Fill Fluid
Description
Silicone 200-10
Silicone 704
Halocarbon® 6.3
Neobee M-20
Pure Glycerin
Ethylene Glycol
High-Temp Blend
Low-Temp Blend
Silicone 200-350
Vegetable Oil
Flurolube® 6.3
Mineral Oil
Temperature
Limits ºF ≥ 15psig
-40 to 400
30 to 500
-40 to 347
-10 to 400
60 to 462
-30 to 300
-4 to 750
-130 to 356
0 to 572
14 to 400
-40 to 392
5 to 482
Temperature
Limits °F <15psig
-40 to 250
78 to 280
-40 to 176
-10 to 200
N/A
N/A
14 to 392
-130 to 176
N/A
14 to 200
N/A
5 to 340
Specific
Gravity
0.934
1.07
1.97
0.92
1.26
1.12
1.07
0.91
0.97
0.94
1.86
0.88
Thermal
Exp. 1/°C
0.00104
0.0008
0.00084
0.00101
0.0005
0.00062
0.0008
0.00108
0.00096
0.00082
0.00087
0.00065
Viscosity
-cSt@ +77F
10
39
14 (68°F)
9.5
1110 (68°F)
30
39
4 (68°F)
350
66
5 (68°F)
270
Notes
General
HT, Vacuum
See Note 1 & 2
Food Grade
Food Grade
Low Temperature
HT, Vacuum
LT, Vacuum
Food Grade
Food Grade
See Notes 1 & 2
Food Grade
Note 1: Not to be used in contact with aluminum
Note 2: For use when inert liquids are required
Model Numbers
The following shows the structure of various model
numbers in order to create the appropriate seal
configuration for your requirements. Select the
required type of seal, and then proceed through model
number construction. A brief description of the base
models is as follows;
Pressure Rating:
150#, 300#, 600# per ASME B16.5
Suitable Pressure Ranges:
10" H20 to maximum flange rating,
depending on diaphragm size and process
conditions.
Operating Temperature Range:
-130°F to 752°F (-90°C to 400°C)
Standard Features Instrument Connection:
Direct mount or axial capillary up to 30 ft.
(>30 ft. consult factory), SS armored,
SS PVC coated
Process Connection:
150#, 300#, 600# flange per ASME B16.5
Process Connection Sealing Face:
2", 3", or 4" raised face per ASME B16.5
Flange Material: 316L SS
Wetted Material: 316L SS, Monel, Hastelloy
C-276, Tantalum, Titanium
Installation:
Use appropriate gasket, bolts, and nuts, per
ASME B16.5 (not supplied with seal)
Pancake Seal (WIKA 990.28):
This type of seal is usually mounted between
two flange connections. It is effectively
clamped or "sandwiched" between the two
flanges. Typical sizes are 2"-4" with 3" being
the most common.
Pressure Rating:
150# & 300# per ASME B16.5 (higher
pressures available upon request)
Suitable Pressure Ranges:
10" H20 to maximum flange rating,
depending on diaphragm size and process
conditions.
Operating Temperature Range:
-40°F to 752°F (-40°C to 400°C)
Standard Features Instrument Connection:
Radial capillary up to 30 ft. (>30 ft. consult
factory), SS armored
SS PVC coated
Process Connection Sealing Face:
2", 3", or 4" raised face per ASME B16.5
Upper Housing Material: 316SS
Diaphragm Material:
316SS, Hastelloy C-276, Tantalum (572°F),
Monel, Titanium
Installation:
Use appropriate gasket, bolts, nuts, and
blind flange per ASME B16.5 (not supplied
with seal)
Flush Flanged (WIKA 990.27):
This seal provides a direct flange connection,
with the diaphragm welded to the sealing
surface. These are available in 2"-4" process
connections.
Extended Flanged (WIKA 990.29):
Same basic construction as the Flush flanged
except that the diaphragm is attached to an
extended barrel which is typically used on
jacketed tanks. Process connection sizes are
3" and 4" with extensions available in 2", 4"
and 6".
Pressure Rating:
150#, 300#, 600# per ASME B16.5
Suitable Pressure Ranges:
10" H20 to maximum flange rating,
depending on diaphragm size and process
conditions.
Operating Temperature Range:
-130°F to 752°F (-90°C to 400°C)
Standard Features Instrument Connection:
Direct mount or axial capillary up to 30 ft.
(>30 ft. consult factory), SS armored
SS PVC coated
Process Connection:
150#, 300#, 600# flange per ASME B16.5
5
Process Connection Sealing Face:
3", or 4" raised face per ASME B16.5
Diaphragm Extension Lengths:
2" (50mm), 4" (100mm), 6" (150mm),
Schedule 40
Flange Material: 316/316L SS
Extension and Raised Face Material:
316L SS, Hastelloy C-276, Monel, Tantalum
(572°F)
Diaphragm Material: 316L SS, Hastelloy
C-276, Monel, Tantalum (572°F)
Installation:
Use appropriate gasket, bolts, and nuts, per
ASME B16.5 (not supplied with seal)
Remote Flanged (WIKA 990.12.601):
These seals use a lower housing to provide the
process connection. A 2.4" diaphragm is used,
and comes in process connection sizes of .5" to
2" (>2 consult factory)
Pressure Rating:
150#, 300#, 600# per ASME B16.5
Suitable Pressure Ranges:
100" H20 to maximum flange rating,
depending on diaphragm size and process
conditions.
Operating Temperature Range:
Up to 752°F (dependent upon materials)
Standard Features Instrument Connection:
Direct mount for EJA530/510 or axial
capillary up to 30 ft. (>30 ft. consult factory),
SS armored, SS PVC coated
Process Connection:
150#, 300#, 600# flange per ASME B16.5
Process Connection Sealing Face:
.5", 1.0", 1.5", or 2" raised face per ASME
B16.5
Upper Housing Material: 316SS
Diaphragm:
316L SS Hastelloy C-276, Monel, Tantalum
(572°F)
Gasket: (between upper and lower housing)
Viton, Max. temperature 400°F (204°C) used
with 316L dia. (SSS), Teflon, Max.
temperature 500°F (260°C) used with all
others
Lower Housing Material:
316 SS, Hastelloy C-276, Monel, 316 SSTantalum-lined or Titanium
Clamp, Support Ring, Nuts and Bolts:
300 series SS, max. temperature
500°F (260°C)
Threaded Connection (WIKA 990.10.501):
These seals also use a lower housing and come
with a 2.4" diaphragm. Process connection
sizes are available in 1/2", 3/4" and 1" NPT-F
threads. (other sizes may be
accommodated—please call)
Pressure Rating: 3675 PSI
Suitable Pressure Ranges: 15 PSI to 3675 PSI
Operating Temperature:
Up to 752°F (dependent upon materials)
Standard Features Instrument Connection:
Direct mount for EJA530/510 or axial
capillary up to 30 ft. (>30 ft. consult factory),
SS armored, SS PVC coated
Process Connection:
.5" NPT, .75" NPT, 1" NPT (female)
Upper Housing Material: 316 SS
Diaphragm Material:
316L SS, Hastelloy C-276, Monel, Tantalum
(572°F)
Gasket: (between upper and lower housing)
Viton, Max. temperature 400°F (204°C) used
with 316L dia. (SSS), Teflon, Max.
temperature 500°F (260°C) used with all
others
Lower Housing Material:
316 SS, Hastelloy C-276, Monel, or Titanium
Clamp, Support Ring, Nuts and Bolts:
300 series SS, max. temperature 500°F
(260°C)
Sanitary (WIKA 990.22 & 981.22):
These seals are used in processes, which
require quick disconnect for ease of cleaning.
The connection itself does not allow collection
of material, which can potentially create
bacterial growth. Process connections are
available in TriClamp, Cherry Burrell, In-Line
sanitary, Tank Spud, Aseptic, "APC" Quick
connect and GC "H" Line.
Also, these seals allow for Close Coupled
Connection (CCC) to the EJA 530/510 direct
mount transmitters. Refer to GS1C21F1-E
for product information.
Traditional:
Pressure Rating: See table
Process
Connection
1.5"
2"
2.5"
3"
4"
Material
All
All
All
All
All
316SS
316SS
316SS
316SS
316SS
Pressure
Rating
600 PSI
550 PSI
450 PSI
350 PSI
250 PSI
Effective
Diaphragm diameter
1.3"
1.6"
2.1"
2.9"
3.5"
Suitable Pressure Ranges:
15 PSI to 600 PSI (1000 PSI) [by using
the appropriate clamping device.]
Operating Temperature Range:
-22°F to 400°F (-30°C to 205°C)
Standard Features Instrument Connection:
Direct mount or axial capillary up to 30ft.,
SS armored
Process Connection:
1.5", 2", 2.5", 3", & 4 Tri-Clamp CherryBurrell I-Line and Q-Line, Aseptic connection,
APC quick connect, GC H-Line, 4" tank spud
Upper Housing Material:
316L SS, Hastelloy C-276
Diaphragm Material:
316L SS, Hastelloy C-276
In-Line:
Pressure Rating:
6
Low-Range (WIKA 990.40 & 990.41):
These seals are designed for applications
with smaller measurement spans (≤ 150
w.c.). An expanded lower housing is used to
accommodate a 3.5" diaphragm. As with
other lower housing, this can also function
with a flushing ring when a flushing
connection is selected. Process connections
are available in a variety of sizes from 1/2" to
4" in flanged-direct mount, remote flange and
remote flange threaded designs.
Pressure Rating:
150#, 300#, 600# per ASME B16.5, or
1500 PSI-Threaded
Suitable Pressure Ranges:
From 10" H20 to max. flange rating or 1500
PSI-for threaded connection
Operating Temperature Range:
-40°F to 752°F (-40°C to 400°C)
Standard Features Instrument Connection:
Direct mount or axial capillary up to 30 ft.
(>30 ft. consult factory), SS armored,
SS PVC coated
Process Connection:
0.5" to 4.0"
Upper Housing Material: 316 SS
Diaphragm:
316L SS, Hastelloy C-276, Monel, Titanium,
Tantalum (max. 572°C)
Gasket:
Viton, max. temperature 400°F (204°F)
Lower Housing Material:
316 SS, Hastelloy C-276, Monel, Titanium,
Tantalum lined 316
Bolts:
300 series SS, max. temperature 500°F
(260°C)
Saddle (WIKA 910.20):
These seals support a saddle weld process
connection, designed for pipe line pressure
measurement.
Pressure Rating:
1500 PSI; depending on pipe size
Suitable Pressure Ranges:
15 PSI to 1500 PSI
Operating Temperature Range:
0°F to 482°F (-12°C to 250°C)
Standard Features Instrument Connection:
Direct mount for EJA530/510 or axial
capillary up to 30 ft. (>30 ft. consult factory)
Piping Size:
3" to 12" pipe
Transmitter:
Most typical remote seal applications are
supported by the EJA110A (DP) and
EJA430A (Gauge) transmitters. To meet
process requirements, other DPharp
transmitters can be fitted with diaphragm
seals: EJA130A DP cells and
EJA440A/310A/510A/530A GP/AP. Follow
the model code configuration as listed
in the specific instrument s GS sheet.
■ Diaphragm
Size
The error induced in a system can be greatly affected by
differential temperature (between the process and the fill
fluid) and by the spring constant of the diaphragm used.
An error in a filled capillary system can be calculated by
the following equation:
Error (in. H2O) = (˘ T) (Et) (Rs) Vt)
∆T The differential temperature change
Et
The coefficient of thermal expansion of the fill fluid
Rs The diaphragm spring constant
Vt
The volume of the fill fluid subjected to
temperature change
The following graph shows the comparison of two different
diaphragm sizes and their effect on total error induced.
Error vs. Temperature
25
Error H2O
600 PSI (1000 PSI) [by using the appropriate
clamping device]
Suitable Pressure Ranges:
15 PSI to 600 PSI (1000 PSI) [by using the
appropriate clamping device]
Operating Temperature Range:
-130°F to 752°F (-90°C to 400°C)
Standard Features Instrument Connection:
Direct mount for EJA530/510 or axial
capillary up to 30 ft. (>30 ft. consult factory),
SS armored, SS PVC coated
Process Connection:
.75", 1", 1.5", 2", 3", 4", Tri-Clamp
Body: 316L SS, Hastelloy C-276
Diaphragm: 316L SS, Hastelloy C-276
20
15
10
2.5" seal
4.0" seal
5
0
0
10
20
30
40
50
60
70
80
90
100
∆T
This does not necessarily mean that a bigger diaphragm
is required. When a gauge pressure transmitter is being
used at pressures higher than 100psig, a smaller
diaphragm can be used. Also, if a system has a large ∆T
between the process and ambient temperature but the
system is stable, such that this temperature difference is
constant, the two legs of the system will compensate and
the error can be zeroed out of the system. the following is
a quick pick chart for reference.
Transmitter Span
10 to 100 H2O
100 to 1000 H2O
30 to 200 psi
200 to 1000 psi
Suggested Diaphragm
Size
≥ 3"
≥ 2.4"
≥ 2"
≥ 1"
7
Transmitter Model Codes
Model
EJA110A
Output
Suffix Codes
-D
-E
Measurement
Span
(Capsule)
Wetted Parts
M
H
V
S
Connection
Bolting
Installation
Electrical
Connection
Indication
5
B
-9
2
7*
E
N
Mounting
A
B
N
Description
Differential Pressure Transmitter
4 to 20 mA output with BRAIN protocol
4 to 20 mA output with HART protocol
4 to 400 in H2O
20 to 2000 in H2O
20 to 2000 psid
Hastelloy C-276 diaphragm;
SUS316SS flange, vent & drain
1/4" NPT on cover flange
SUS630 Stainless Steel
Horizontal impulse piping
1/2" NPT Female Electrical Connection, 2 connections
same with SS Blind Plug
LCD digital indicator with range switch
Blind - No Indicator
2" mounting bracket - Carbon Steel
2" mounting bracket - Stainless Steel
No bracket
Example: EJA110A-DMS5B-92EA/FF1/D1/N5 — See next page for typical seal options
(refer to product GS for complete model configurations)
Model
EJA430A
Output
Measurement Span
(Capsule)
Wetted Parts
Connection
Bolting
Installation
Electrical
Connection
Indication
Suffix Codes
-D
-E
A
B
S
5
Mounting
B
-9
2
7*
E
N
A
B
N
Description
Gauge Pressure Transmitter
4 to 20 mA output with BRAIN protocol
4 to 20 mA output with HART protocol
4.3 to 430 psig
20 to 2000 psig
Hastelloy C-276 diaphragm;
SUS316SS flange, vent & drain
1/4" NPT on cover flange
SUS630 Stainless Steel
Horizontal impulse piping
1/2" NPT Female Electrical Connection, 2 connections
same with SS Blind Plug
LCD digital indicator with range switch
Blind - No Indicator
2" mounting bracket - Carbon Steel
2" mounting bracket - Stainless Steel
No bracket
Example: EJA430A-DAS5B-92EA/FF1/D1/N5 — See next page for typical seal options
(refer to product GS for complete model configurations)
*1/2" NPT Female Electrical Connection:
two connectors and a blind plug
8
■
OPTIONAL SPECIFICATIONS (Most commonly selected for North America)
Item
Factory
Mutual (FM)
Canadian
Standards
Association
(CSA)
Lightning
Protector
Oil Prohibited
Use
Calibration
Units*1
Stainless Steel
Amplifier
Housing*2
Body Option *4
Description
FM Explosionproof Approval
Explosionproof for Class I, Division 1, Groups B, C and D
Dust-ignitionproof for Class II/III, Division 1, Groups E, F and G
Hazardous (classified) locations, indoors and outdoors (NEMA 4X)
Temperature class: T6
Amb. Temp.: -40 to 60…C (-40 to 140…F)
Electrical connection: 1/2 NPT female*1
FM Intrinsically safe Approval*3
Intrinsically Safe for Class I, Division 1, Groups A, B, C & D, Class II,
Division 1, Groups E, F & G and Class III, Division 1, Hazardous Locations
Nonincendive for Class I, Division 2, Groups A, B, C & D, Class II, Division 2,
Groups E, F & G, and Class III, Division 1 Hazardous Locations
Enclosure: "NEMA 4X", Temp. Class: T4, Amb. Temp.: -40 to 60…C (-40 to 140…F)
Intrinsically Safe Apparatus Parameters
(Groups A, B, C, D, E, F and G)
Vmax = 30 V, Imax = 165 mA, Pmax = 0.9 W, Ci = 22.5 nF, Li = 730 H
(Groups C, D, E, F and G)
Vmax = 30 V, Imax = 225 mA, Pmax = 0.9 W, Ci = 22.5 nF, Li = 730 H
Electrical connection: 1/2 NPT female*1
Combined FF1 and FS1*3
Electrical connection: 1/2 NPT female*1
CSA Explosionproof Approval
Explosionproof for Class I, Division 1, Groups B, C and D
Dust-ignitionproof for Class II/III, Division 1, Groups E, F and G
Division 2 ’SEALS NOT REQUIRED’, Temp. Class: T4, T5, T6, Encl Type 4x
Max. Process Temp.: T4; 120…C (248…F), T5; 100…C (212…F), T6; 85…C (185…F)
Amb. Temp.: -40 to 80…C (-40 to 176…F)
Electrical connection: 1/2 NPT female*1
CSA Intrinsically safe Approval*3
Class I, Groups A, B, C and D, ClassII and III, Groups E, F and G
Encl Type 4x, Temp. Class: T4, Amb. Temp.: -40 to 60…C (-40 to 140…F)
Vmax = 30 V, Imax = 165 mA, Pmax = 0.9 W, Ci = 22.5 nF, Li = 730 H
Electrical connection: 1/2 female*1
Combined CF1 and CS1*3
Electrical connection: 1/2 female*1
Transmitter power supply voltage: 10.5 to 32 V DC (10.5 to 30 V DC for intrinsically safe type,
9 to 32 V DC for Fieldbus communication type)
Allowable current: Max. 6000 A (1X40 s), Repeating 1000 A (1X40 s) 100 times
Degrease cleansing treatment and with fluorinated oil-filled capsule
Operating temperature -20 to 80…C
P Calibration (psi unit)
Code
Amplifier housing material: SCS14A stainless steel
(equivalent to SUS316 cast stainless steel or ASTM CF-8M)
/E1
Assemble with low volume cover flange for remote diaphragm seal attachment
/N5
*1: Applicable for electrical connection code 2 and 7.
*2: Applicable for Electrical connection code 2, 3, 4, 7, 8 and 9. Not applicable for Optional code Pl and X1.
*3: Applicable for output signal code D and E.
*4: Do Not select this option if attaching one seal to D.P. transmitter or direct-mount on D.P., G.P. or A.P..
For intrinsically safe approval, use a safety barrier certified by the testing laboratories that corresponds with parameter limits.
(BARD-400 is not acceptable.)
/FF1
/FS1
/FU1
/CF1
/CS1
/CUI
/A
/K2
/D1
9
Extended Flanged Type Diaphragm Seals
How to order
Specify the model number by
choosing one code from each
section.
Example:
FLX-3012SSSNOOA05AHDP
Notes
1. Direct-Mount, FXD only.
2. Use with inert fill for O2
service.
3. For wetted parts
material.
4. Select for 1/4" MNPT capillary connection. EJA110/430
requires -7 installation code.
Not valid for direct mount.
5. Standard capillary I.D. is
2.0mm (1.0mm for ≤10ft. capillary).
Code
FLX
Model
FXD
-30
Connection Size
-40
1
Flange Rating
3
6
2
Extension Length
4
6
SSS
HHC
Wetted, Extension
SHC
Diaphragm
MMM
TTA
Always
N
Always
0
Always
0
A
B
C
Fill Fluid
D
E
G
H
L
Direct Mount
000
Armored Capillary
05A
10A
15A
20A
25A
30A
PVC Coated Capillary 05P
10P
15P
20P
25P
30P
Close Coupled
CCC
HGP
HDP
Seal Connection
DDP
LDP
DGP
/S
/K
/M
Options
/C
/10
/06
/V
/H
/P
/S80
Description
Note
Extended Flanged Connection
Direct Mount Extended Flange
3.0" Connection
4.0" Connection
ANSI 150# Rating
ANSI 300# Rating
ANSI 600# Rating
2.0" Extension
4.0" Extension
6.0" Extension
316SS 316L Diaphragm
Hastelloy C-276 Diaphragm
316SS Hastelloy Diaphragm
Monel/Monel Diaphragm
Tantalum/Tantalum Diaphragm
Non Required Always
Non Required Always
Non Required Always
DC200
DC704
Halocarbon (Inert)
2
Neobee M20
Glycerin
1
High Temperature
Low Temperature
Fluorolube (Inert Fill)
2
Direct Mount Flange (FXD only)
1
5 feet Armored Capillary
10 feet Armored Capillary
15 feet Armored Capillary
20 feet Armored Capillary
25 feet Armored Capillary
30 feet Armored Capillary
5 feet PVC Coated Capillary
10 feet PVC Coated Capillary
15 feet PVC Coated Capillary
20 feet PVC Coated Capillary
25 feet PVC Coated Capillary
30 feet PVC Coated Capillary
Close Coupled Connection for use w/EJA530A/510A
1
High Side G/P
High Side D/P
Both Sides D/P
Low Side D/P
Direct G/P (for use with EJA530A/510A)
Threaded EJA/capillary connection
4
Degreased
2
Mill Certification
3
Calibration/NIST Certification
Smaller, 1.0mm Capillary I.D.
5
Smallest, 0.6mm Capillary I.D.
5
Vacuum Service Fill (over-fill)
Helium Leak Test Certificate
PFA Coated Diaphragm
Schedule 80 Pipe Rating
10
Flush Flanged Type Diaphragm Seals
How to order
Specify the model number by
choosing one code from each
section.
Example:
FLG-301NSSSNO0A05AHDP
Notes
1. Direct-Mount, FGD only.
2. Use with inert fill for O2
service.
3. For wetted parts
material.
4. Select for 1/4" MNPT capillary connection. EJA110/430
requires -7 installation code.
Not valid for direct mount.
5. Standard capillary I.D. is
2.0mm (0.6mm for ≤10ft. capillary).
6. Requires lower housing.
7. Not available on Tantalum
or Titaniam dia. Max temp
150° C.
8. Available wetted mat l
316L SS, Hastelloy C and
Tantalum only, for 2" & 3"
sizes.
9. Not available with option
code /SD.
Code
FLG
Model
FGD
-20
Connection Size
-30
-40
1
Flange Rating
3
6
Always
N
SSS
HHC
Diaphragm and
SHC
Upper Housing/
Wetted Housing/
STA
Diaphragm
SMM
STI
Always
N
0
S
Lower Housing
H
Material
M
E
0
1
Flushing Connection 2
3
4
A
B
C
D
Fill Fluid
E
G
H
L
Direct Mount
000
Armored Capillary
05A
10A
15A
20A
25A
30A
PVC Coated Capillary 05P
10P
15P
20P
25P
30P
Close Coupled
CCC
HGP
HDP
Seal Connection
DDP
LDP
DGP
/S
/K
/M
Options
/C
/10
/06
/T
/SD
/V
/H
Description
Note
Flush Flanged Connection
Direct Mount Flush Flange
2.0" Connection
3.0" Connection
4.0" Connection
ANSI 150# Rating
ANSI 300# Rating
ANSI 600# Rating
Always
316SS/316SS/316L Diaphragm
316SS/Hastelloy C-276/Hastelloy C-276 Dia.
316SS/316SS/Hastelloy C-276 Diaphragm
316SS/Tantalum/Tantalum Diaphragm
316SS/Monel/Monel Diaphragm
316SS/Titanium/Titanium Diaphragm
None-Always
None
316SS
Hastelloy C
Monel
Titanium
None
Single 1/4"
6
Dual 1/4"
6
Single 1/2"
6
Dual 1/2"
6
DC200
DC704
Halocarbon (Inert)
2
Neobee M20
Glycerin
1
High Temperature
Low Temperature
Fluorolube (Inert)
2
Direct Mount Flange (FGD only)
1
5 feet Armored Capillary
10 feet Armored Capillary
15 feet Armored Capillary
20 feet Armored Capillary
25 feet Armored Capillary
30 feet Armored Capillary
5 feet PVC Coated Capillary
10 feet PVC Coated Capillary
15 feet PVC Coated Capillary
20 feet PVC Coated Capillary
25 feet PVC Coated Capillary
30 feet PVC Coated Capillary
Close Coupled Connection for use w/EJA530A/510A
1
High Side Gauge
High Side D/P
Both Sides D/P
Low Side D/P
Direct G/P (for use with EJA530A/510A)
Threaded
4
Degreased
2
Mill Certification
3
Calibration/NIST Certification
Smaller, 1.0mm Capillary I.D.
5
Smallest, 0.6mm Capillary I.D.
5
Teflon (PTFE) lined diaphragm
7
Step-shaped Diaphragm (>500m Bar A)
8
Vacuum Service Fill (over-fill)
9
Helium Leak Test Certificate
11
Remote Flanged Type Diaphragm Seals
How to order
Specify the model number by
choosing one code from each
section.
Example:
FLR-101NSSSNS0A05AHDP
Notes
1. Use with inert fill for O2
service.
2. For wetted parts
material.
3. Not available for flushing
connection.
4. Consult factory for price if
used with Hastelloy or Monel
lower housing.
5. Requires lower housing.
6. Standard capillary I.D. is
2.0mm (0.6mm for ≤ 10ft. capillary).
7. Select for 1/4" MNPT capillary connection. EJA110/430
requires -7 installation code.
Not valid for direct mount.
8. Titanium upper housing
threaded to capillary.
9. Not available on Tantalum or
Titanium diaphragm Max Temp
150°C.
10. Direct-mount only.
Code
FLR
Model
FRD
-05
-10
Connection Size
-15
-20
1
3
Flange Rating
6
Always
N
SSS
HHC
SHC
Upper Housing/
Diaphragm
STA
SMM
TTI
Always
N
S
H
Lower Housing
M
Material
T
E
0
Flushing Connection 1
2
A
B
C
Fill Fluid
D
G
H
L
Armored Capillary
05A
10A
15A
20A
25A
30A
PVC Coated Capillary 05P
10P
15P
20P
25P
30P
Close Coupled
CCC
HGP
HDP
Seal Connection
DDP
LDP
DGP
/S
/K
/M
Options
/C
/10
/06
/T
/V
/H
Description
Note
Remote Flanged Connection
Direct Mount Remote Flange
0.5" Connection
1.0" Connection
1.5" Connection
2.0" Connection
ANSI 150# Rating
ANSI 300# Rating
ANSI 600# Rating
Always
316SS/316L Diaphragm
All Hastelloy
316 Upper/Hastelloy C Diaphragm
316SS/Tantalum Diaphragm
316SS/Monel 400 Diaphragm
Titanium/Titanium Diaphragm
8
None-Always
316SS
Hastelloy C-276
Monel
Tantalum Lined 316SS
3
Titanium
None
Single 1/4"
4,5
Dual 1/4"
4,5
DC200
DC704
Halocarbon (Inert)
1
Neobee M20
High Temperature
Low Temperature
Fluorolube (Inert)
1
5 feet Armored Capillary
10 feet Armored Capillary
15 feet Armored Capillary
20 feet Armored Capillary
25 feet Armored Capillary
30 feet Armored Capillary
5 feet PVC Coated Capillary
10 feet PVC Coated Capillary
15 feet PVC Coated Capillary
20 feet PVC Coated Capillary
25 feet PVC Coated Capillary
30 feet PVC Coated Capillary
Close Coupled Connection for use w/EJA530A/510A 10
High Side Gauge
High Side D/P
Both Sides D/P
Low Side D/P
Direct G/P (for use with EJA530A/510A)
Threaded
7,8
Degreased
1
Mill Certification
2
Calibration/NIST Certification
Smaller, 1.0mm Capillary I.D.
6
Smallest, 0.6mm Capillary I.D.
6
Teflon (PTFE) lined diaphragm
9
Vacuum Service Fill (over-fill)
Helium Leak Test Certificate
12
Pancake Type Diaphragm Seals
How to order
Specify the model number by
choosing one code from each
section.
Example:
PNK-301NSSSNO0A05AHDP
Notes
1. Use with inert fill for O2
service.
2. For wetted parts
material.
3. Select for 1/4" MNPT capillary connection. EJA 110/430
requires -7 instqallation code.
Not valid for direct mount.
4. Requires lower housing.
5. Standard capillary I.D. is
2.0mm (0.6mm for ≤ 10ft. capillary).
6. Not available on Tantalum or
Titanium diaphragm Max Temp
150°C.
7. Available wetted mat l
316L SS, Hastelloy C and
Tantalum.
8. Not available with option
code /SD.
Code
PNK
-20
Connection Size
-30
0
Flange Rating
1
3
Always
N
SSS
HHC
Upper Housing/
SHC
Wetted Housing/
STA
Diaphragm
SMM
STI
N
Backup Flange
C
S
0
S
Lower Housing
Material
H
M
0
1
Connection Size
2
3
4
A
B
C
Fill Fluid
D
G
H
L
Armored Capillary
05A
10A
15A
20A
25A
30A
PVC Coated Capillary 05P
10P
15P
20P
25P
30P
Seal Connection
HGP
HDP
DDP
LDP
DGP
/S
/K
/M
Options
/C
/10
/06
/T
/SD
/V
/H
Model
Description
Pancake Seal
2.0" Connection
3.0" Connection
No Backup Flange
ANSI 150# Rating
ANSI 300# Rating
Always
316SS/316SS/316L Diaphragm
All Hastelloy
316/316SS/Hastelloy C-276
316SS/Tantalum/Tantalum
316SS/Monel/Monel
316SS/Titanium/Titanium Diaphragm
None
Carbon Steel
Stainless Steel
No Lower Housing
316SS
Hastelloy C
Monel
None
Single 1/4"
Dual 1/4"
Single 1/2"
Dual 1/2"
DC200-50
DC704
Halocarbon (Inert)
Neobee M20
High Temperature (-4 to 740°F)
Low Temperature (-130 to 356°F)
Fluorolube (Inert)
5 feet Armored Capillary
10 feet Armored Capillary
15 feet Armored Capillary
20 feet Armored Capillary
25 feet Armored Capillary
30 feet Armored Capillary
5 feet PVC Coated Capillary
10 feet PVC Coated Capillary
15 feet PVC Coated Capillary
20 feet PVC Coated Capillary
25 feet PVC Coated Capillary
30 feet PVC Coated Capillary
High Side Gauge
High Side D/P
Both Sides D/P
Low Side D/P
Direct G/P (for use with EJA530A/510A)
Threaded
Degreased (use w/inert fill for O2 service)
Mill Certification for wetted parts material
Calibration/NIST Certification
Smaller, 1.0mm Capillary I.D.
Smallest, 0.6mm Capillary I.D.
Teflon (PTFE) lined diaphragm
Step-shaped Diaphragm (>500 mBar A)
Vacuum Service Fill (over-fill)
Helium Leak Test Certificate
Note
4
4
4
4
4
1
1
3
1
2
5
5
6
7
8
13
Sanitary Type Diaphragm Seals
How to order
Specify the model number by
choosing one code from each
section.
Example:
STC-20SNSSSN00D05AHDP
Notes
1. Sanitary in-line only.
2. Not available on sanitary
in-line.
3. For wetted parts material.
4. Direct Mount only.
5. Select for 1/4" MNPT capillary connection. EJA 110/430
requires -7 installation code.
Not valid for direct mount.
6. TSP and TSD require 2.0" or
6.0" extension length selection.
7. Standard capillary I.D. is 2.0
mm (1.0mm for ≤10ft. capillary).
Code
STC
CBI
CBQ
SNL
TSP
ASP
APC
Model
GCH
STD
CID
CQD
TSD
ASD
APD
GHD
-TB
-TC
-TD
-TE
-TF
Connection Size
-TG
-15
-20
-25
-30
-40
S
Connection Rating
F
L
N
Extension Length
2
6
SSS
Upper Housing/
Diaphragm
HHC
Always
N
0
Tank Spud Sleeve
2
6
Always
0
D
E
Fill Fluid
J
K
M
Direct Mount
000
Armored Capillary
05A
10A
15A
20A
25A
30A
PVC Coated Capillary 05P
10P
15P
20P
25P
30P
Close Coupled
CCC
HGP
HDP
Seal Connection
DDP
LDP
DGP
/S
/M
/C
Options
/10
/06
/P
/A
/V
/H
Description
Note
Sanitary Tri-Clamp
Cherry Burrell "I" Line
Cherry Burrell "Q" Line
Sanitary In-Line
Tank Spud (4" only)
6
Aseptic Connection
"APC" Quick Connect
GC "H" Line
Direct Mount Tri-Clamp
Direct Mount Cherry Burrell "I" Line
Direct Mount Cherry Burrell "Q" Line
Direct Mount Tank Spud (4")
6
Direct Mount Aseptic
Direct Mount "APC"
Direct Mount GC "H"
3/4" (Sanitary In-Line only)
1
1.0" (Sanitary In-Line only)
1
1.5" (Sanitary In-Line only)
1
2.0" (Sanitary In-Line only)
1
3.0" (Sanitary In-Line only)
1
4.0" (Sanitary In-Line only)
1
1.5" Connection
2.0" Connection
2.5" Connection
2
3.0" Connection
4.0" Connection
2
Sanitary
20 RA Finish (Electro-Polish)
Sanitary In-Line - 20RA Finish
1
None
2.0" Extension (TSP/TSD only)
6
6.0" Extension (TSP/TSD only)
6
316SS/316L Diaphragm
All Hastelloy
2
Non required
None
2" ext. Tank Spud Sleeve (TSP/TSD only)
6" ext. Tank Spud Sleeve (TSP/TSD only)
No Lower Housing
Neobee M20
Glycerin
4
DC200 - 350 (Food Grade)
Vegetable Oil
Mineral Oil
Direct Mount Flange
4
5 feet Armored Capillary
10 feet Armored Capillary
15 feet Armored Capillary
20 feet Armored Capillary
25 feet Armored Capillary
30 feet Armored Capillary
5 feet PVC Coated Capillary
10 feet PVC Coated Capillary
15 feet PVC Coated Capillary
20 feet PVC Coated Capillary
25 feet PVC Coated Capillary
30 feet PVC Coated Capillary
Close Coupled Connection for use w/EJA530A/510A
4
High Side Gauge
High Side D/P
Both Sides D/P
Low Side D/P
Direct G/P (for use with EJA530A/510A)
Threaded
5
Mill Certification
3
Calibration/NIST Certification
Smaller, 1.0mm Capillary I.D.
7
Smallest, 0.6mm Capillary I.D.
7
Tank Spud Clamp (TSP/TSD only)
EPDM O-Ring (tank spud only)
Vacuum Service Fill (over-fill)
Helium Leak Test Certificate
14
Threaded Off-Line Type Diaphragm Seals
How to order
Specify the model number by
choosing one code from each
section.
Example:
THR-TCTNSSSNS0A05AHDP
Notes
1. Use with inert fill for O2
service.
2. For wetted parts
material.
3. Consult factory for price if
used with Hastelloy on Monel
lower housing.
4. Select for 1/4" MNPT capillary connection. EJA110/430
requires -7 installation code.
Not valid for direct mount.
5. Requires lower housing.
6. Standard capillary I.D. is
2.0mm (1.0mm for ≤10ft.
capillary).
7. Titanium upper housing
threaded to capillary.
8. Not available on Tantalum or
Titanium diaphragm Max Temp
150°C.
9. Direct-mount only.
Code
THR
Model
TRD
-TA
Connection Size
-TB
-TC
T
Flange Rating
M
Always
N
SSS
HHC
SHC
Upper Housing/
Diaphragm
STA
SMM
TTI
Always
N
S
H
Lower Housing
M
E
0
1
Flushing Connection 2
5
6
A
B
C
Fill Fluid
D
G
H
L
Armored Capillary
05A
10A
15A
20A
25A
30A
PVC Coated Capillary 05P
10P
15P
20P
25P
Close Coupled
CCC
Cooling Element
4CE
HGP
HDP
Seal Connection
DDP
LDP
DGP
/S
/K
/M
Options
/C
/10
/06
/T
/V
/H
Description
Threaded Connection
Direct Mount Threaded (for EJA530/510A only)
1/2" Connection
3/4" Connection
1.0" Connection
Threaded NPT-F
Threaded NPT-Male
Non required
316SS/316L Diaphragm
All Hastelloy C-276
316SS/Hastelloy Diaphragm
316S/Tantalum Diaphragm
316SS/Monel
Titanium/Titanium
Non required
316SS
Hastelloy C-276
Monel
Titanium
None
Single 1/4"
Dual 1/4"
Single 1/4" (Hastelloy C)
Dual 1/4" (Hastelloy C)
DC200
DC704
Halocarbon (Inert)
Neobee M20
High Temperature
Low Temperature
Fluorolube (Inert)
5 feet Armored Capillary
10 feet Armored Capillary
15 feet Armored Capillary
20 feet Armored Capillary
25 feet Armored Capillary
30 feet Armored Capillary
5 feet PVC Coated Capillary
10 feet PVC Coated Capillary
15 feet PVC Coated Capillary
20 feet PVC Coated Capillary
25 feet PVC Coated Capillary
Note
Close Coupled Connection for use w/EJA530A/510A
9
9
4" Cooling Element, 316SS (typical 200+°F dissipation)
High Side Gauge
High Side D/P
Both Sides D/P
Low Side D/P
Direct G/P (for use with EJA530A/510A)
Threaded
Degreased
Mill Certification
Calibration/NIST Certification
Smaller, 1.0mm Capillary I.D.
Smallest, 0.6mm Capillary I.D.
Teflon (PTFE) Lined Diaphragm
Vacuum Service Fill (over-fill)
Helium Leak Test Certificate
7
5
5
3, 5
3, 5
1
1
4,7
1
2
6
6
8
15
Low-Range Type Diaphragm Seals
How to order
Specify the model number by
choosing one code from each
section.
Example:
FBD-20TNSSSNS0A05AHDP
Notes
1. Direct mount only.
2. Use with inert fill for O2
service.
3. Requires lower housing.
4. Select for 1/4" MNPT capillary connection. EJA110/430
requires -7 installation code.
Not valid for direct mount.
5. Standard capillary I.D. is
2.0mm (1.0mm for ≤10ft.
capillary).
6. For flanges connection only.
7. Not available on Tantalum or
Titanium diaphragm Max Temp
150°C.
Code
FBD
FBR
FBT
-TA
-TB
-TC
-TD
-TE
-05
Connection Size
-07
-10
-15
-20
-30
-40
T
M
Flange Rating
1
3
6
Always
N
SSS
HHC
SHC
Upper Housing/
WettedDiaphragm
STA
SMM
STI
Always
N
S
M
Lower Housing
H
Material
T
E
0
1
Flushing Connection 2
3
4
A
B
C
D
Fill Fluid
E
G
H
L
Direct Mount
000
Armored Capillary
05A
10A
15A
20A
25A
30A
PVC Coated Capillary 05P
10P
15P
20P
25P
30P
Close Coupled
CCC
Seal Connection
HGP
HDP
DDP
LDP
DGP
/S
/K
/M
/C
Options
/10
/06
/T
/V
/H
Model
Description
Flanged Direct Mount
Remote Flange
Remote Flange Threaded
1/2" (FBT)
3/4" (FBT)
1.0" (FBT)
1.5" (FBT)
2.0" (FBT)
1/2" (FBR)
3/4" (FBR)
1.0" (FBD, FBR)
1.5" (FBD, FBR)
2.0" (FBD, FBR)
3.0" (FBD, FBR)
4.0" (FBD, FBR)
Threaded NPT-F
Threaded NPT-Male
ANSI 150#
ANSI 300#
ANSI 600#
Always
316SS/316L Diaphragm
All Hastelloy
316 Upper/Hastelloy C Diaphragm
316SS/Tantalum Diaphragm
316SS/Monel 400 Diaphragm
Titanium/Titanium Diaphragm
Non required
316SS
Hastelloy C
Monel
Tantalum Plated 316SS
Titanium
None
Single 1/4"
Dual 1/4"
Single 1/2"
Dual 1/2"
DC200
DC704
Halocarbon (Inert)
Neobee M20
Glycerin
High Temperature
Low Temperature
Fluorolube (Inert)
Direct Mount (FBD only)
5 feet Armored Capillary
10 feet Armored Capillary
15 feet Armored Capillary
20 feet Armored Capillary
25 feet Armored Capillary
30 feet Armored Capillary
5 feet PVC Coated Capillary
10 feet PVC Coated Capillary
15 feet PVC Coated Capillary
20 feet PVC Coated Capillary
25 feet PVC Coated Capillary
30 feet PVC Coated Capillary
Close Coupled Connection for use w/EJA530/510A
High Side Gauge
High Side D/P
Both Sides D/P
Low Side D/P
Direct G/P (for use with EJA530A/510A)
Threaded
Degreased
Mill Certification
Calibration/NIST Certification
Smaller, 1.0mm Capillary I.D.
Smallest, 0.6mm Capillary I.D.
Teflon (PTFE) lined diaphragm
Vacuum Service Fill (over-fill)
Helium Leak Test Certificate
Note
6
3
3
3
3
2
1
2
1
1
4
2
5
5
7
16
Saddle Type Diaphragm Seals
How to order
Specify the model number by
choosing one code from each
section.
Example:
SDL-08NNSSSSNNA05AHDP
1. Select for 1/4" MNPT connection. Transmitter requires
-7 installation code. Not valid
for direct mount.
2. Use with Inert Fill for O2
service.
3. For wetted parts material.
4. Standard capillary I.D. is
2.0mm (1.0mm for ≤ 10ft.
capillary).
5. Direct-mount only.
Description
Remote Saddle
Saddle Close Coupled
(EJA 510/530)
-NA
WIKA retrofit (existing saddle)
-03
3.0" (normal pipe size)
-04
4.0" (normal pipe size)
Connection Size
-06
6.0" (normal pipe size)
-08
8.0" (normal pipe size)
-10
10.0" (normal pipe size)
-12
12.0" (normal pipe size)
Connection Rating
N
1500PSI
Always
N
None
SSS
316SS/316L Diaphragm
SHC 316SS/Hastelloy C Diaphragm
Upper Housing/
Diaphragm
STA 316SS/Tantalum Diaphragm
SMM 316SS/Monel 400
Assembly Hardware S
Stainless Steel
N
None
C
Carbon Steel, Nickel Plated
Lower Housing
Material
S
316SS
H
Hastelloy C-276
Always
N
None
A
DC200
B
DC704
C
Halocarbon (Inert)
Fill Fluid
D
Neobee M20
G
High Temperature
H
Low Temperature
L
Fluorolube (Inert)
Armored Capillary
05A
5 feet Armored Capillary
10A
10 feet Armored Capillary
15A
15 feet Armored Capillary
20A
20 feet Armored Capillary
25A
25 feet Armored Capillary
30A
30 feet Armored Capillary
PVC Coated Capillary 05P
5 feet PVC Coated Capillary
10P
10 feet PVC Coated Capillary
15P
15 feet PVC Coated Capillary
20P
20 feet PVC Coated Capillary
25P
25 feet PVC Coated Capillary
30P
30 feet PVC Coated Capillary
Close Coupled
CCC Close Coupled Connection for use w/EJA530/510A
HGP High Side Gauge
HDP High Side D/P
Seal Connection
DDP Both Sides D/P
LDP Low Side D/P
DGP Close Couples (for use with EJA530A/510A)
/S
Threaded
/K
Degreased
/M
Mill Certification
Options
/10
Smaller, 1.0mm Capillary I.D.
/06
Smallest, 0.6mm Capillary I.D.
/T
Teflon (PTFE) lined diaphragm
/C
Calibration/NIST Certification
/V
Vacuum Service Fill (over-fill)
/H
Helium Leak Test Certificate
Model
Code
SDL
SDD
Note
2
2
5
1
2
3
4
4
17
Extended Flanged Type Diaphragm Seals
Size
3"
4"
Flange Rating
A
150#
7.48
300#
8.27
150#
9.06
300#
10.04
B
6.01
6.63
7.5
7.87
C
5.0
5.0
6.22
6.22
D
2.99
2.99
3.7
3.7
E
2.83
2.83
3.5
3.5
F
0.94
1.14
0.94
1.26
G
0.06
0.06
0.06
0.06
2
L
4
6
2
4
6
Flush Flanged Style Diaphragm Seals
Size
2"
3"
4"
Flange Rating
150#
300#
600#
150#
300#
600#
150#
300#
600#
A
5.9
6.5
B
4.74
5.0
7.48
8.27
6.0
6.63
9.06
10.04
10.83
7.5
7.87
8.5
C
D
3.62
2.32
5.0
E
0.77
0.89
1.26
0.94
1.14
1.51
0.94
1.26
2.00
3.5
6.22
3.5
F
0.625
G
0.79
0.25
0.625
0.25
0.625
0.25
0.79
0.91
0.79
0.91
1.02
Remote Flange Type Diaphragm Seals
G2 Process
D1
H
G3
Weight
150#
4.25
1.66
4x1/2" – 13 UNC
4.4lbs.
300#
3.74 4.88
1.79
4x1/2" – 11 UNC
8.5lbs.
150#
5.00
1.7
4x3/4" – 13 UNC
6.9lbs.
1.5"
300#
3.74 6.12
3"
600#
1"
Pressure
Rating
D
600#
4x3/4" – 10 UNC
2.1
10.8lbs.
11.5lbs.
Pancake Style Diaphragm Seal
Size
Pressure
A
B
C
D
E
2"
3"
150 to 2500
4
2.32
0.78
4
0.629
150 to 2500
5.28
3.50
0.78
4
0.629
18
Threaded Off-Line Diaphragm Seals
Sanitary Tri-Clamp Diaphragm Seals
Size
G2 Process Connection
D
1/2"
3/4"
1"
3.74
Weight
A
C
D
E
1.5"
1.33lbs.
1.5
1.71
1.97
1.38
H
2"
1.67lbs.
1.5
2.22
2.52
1.38
1.18
2.2
3"
2.00lbs.
2.52
2.78
3.05
1.38
1.41
2.36
1.77
3.46
D1
Tank Spud Diaphragm Seals
19
Saddle Diaphragm Seals
Connection
C
1/4”
or 1/2”
NPT female
Radius R
in
mm
1.49
38
1.77
45
2.24
57
2.76
70
3.35
85
4.31
109.5
5.37
136.5
6.38
162
7.0
177.8
To Fit Pipe Size
in
mm
2.5
65
3.0
80
100
4.0
5.0
125
6.0
150
8.0
200
10.0
250
12.0
300
14.0
350
Pipe Outer Diameter
in
mm
3.00
76.1
3.50
88.9
4.50
114.3
5.5
139.7
6.63
168.3
8.63
219.1
10.75
273.0
12.75
323.8
14.75
374.6
20
Printed in USA
01/04 IMP
FIBU 0017