97
the green light
ipso
ipso
DESCRIPTION
Sealsafe® IP 66 public lighting luminaire for lamps
of up to 250 W. The entire luminaire has an IP 66
tightness level.
The body, cover and closure system are made from
die cast high-quality aluminium alloy. The optical
CHARACTERISTICS – LUMINAIRE
compartment consists of a deep drawn, polished and
anodised aluminium reflector and a glass protector
Optical compartment tightness level: IP 66 Sealsafe®(*)
Control gear tightness level:
(flat or slightly curved).
IP 66 (IP 44 as an option) (*)
Aerodynamic resistance (CxS):
0,089 m2
Impact resistance (glass): IK 08 (**)
Electrical insulation class: I or II (*)
The control gear is attached to a removable plate made
from injected synthetic material or galvanised steel.
A reversible mounting piece, also made from die
cast aluminium, allows adjustment of the luminaire
Weight (empty):
7 kg
(*)
inclination.
The design of this luminaire has enabled the
according to standard IEC – EN 60598
according to standard IEC – EN 62262
optimisation of its functionality while maintaining its
(**)
compact size.
ADVANTAGES
Coating: polyester powder
Colour: Any RAL or AKZO colour
• Compact luminaire
• High photometric performance
687
634
• IP 66 Sealsafe® maintained over time
OPTIONS
238
• IP 66 tightness level for the entire luminaire
• High-quality materials: glass and aluminium
• Photoelectric cell
• Reversible mounting system with variable inclination
• Mounting piece for poles of Ø76 mm
• Electrical class II with electrical disconnector
280
DIMENSIONS – MOUNTINGS
Mounted on Ø60 mm poles (Ø76 as an option) using 2 M8
locking screws.
687
280
238
280
Ø60
(Ø76 as an option)
634
308
ALUMINIUM AND GLASS
The body of the Ipso luminaire is made up of two aluminium alloy pieces and a
tempered glass protector offering a consistent level of transparency.
ADJUSTABLE PHOTOMETRY
An adjustment system with various lamp positions enables the light distribution
to be precisely adapted to the parameters of the site to be lit
(width of the road, height of the installation, distance between poles).
In addition, the luminaire inclination can also be adjusted on site (from 0° to
+ 15° for vertical mounting and from 0° to -20° for side-entry mounting).
TOOL FREE ACCESS
A three-point closing lever, on the cover, gives access to the control gear plate,
which is removable without tools.
Lamp access is obtained by a quarter turn on the plug.
SEALSAFE ®
The optical compartment provides an IP 66 tightness level maintained over time
thanks to the Sealsafe® system.
ipso the green light
For some configurations only: please, consult us
ipso
99
ipso
Cover made of die-cast
high-quality aluminium
alloy, painted.
Neoprene gasket gives
an IP 66 tightness level to
the entire luminaire.
Removable control
Prop made of galvanised steel.
gear plate made of
synthetic material or
galvanised steel.
Two stainless steel
Reflector made of deep drawn,
M8 locking screws.
polished and anodised aluminium
sealed by a glass protector (flat or
slightly curved).
Lampholder support
plug. The optical
compartment has
Reversible mounting
an IP 66 (Sealsafe®)
piece made of die-cast
tightness level,
high-quality aluminium
maintained over time.
alloy, painted. It allows
adjustment of the
luminaire inclination
(from 0° to +15° for
Body made of die-
vertical mounting and
cast high-quality
from 0° to -20° for
aluminium alloy,
Three-point
side-entry mounting).
painted.
closing lever.
PHOTOMETRY
ipsolamps — Reflector
Reflector
Protector
glass
Metal halide with
ceramic arc tube
High-pressure sodium
70 W
100 W
✓
✓
1891
Metal halide
150 W
250 W
70 W
100 W
150 W
250 W
✓
✓
✓
✓
✓
✓
500 417 333 250 167
E27/E40
LIGHT DISTRIBUTION
15°/165°
Reflector 1891
90°
270°
500 417 333 250 167
180°
0°
15°/165°
270°
ipso/1891/verreplat/SONT150
ipso/1891/verreplat/SONT150
ipso 101
the right lighting
www.schreder.com
Lighting
roads and
large areas