SmartZone™ Cabinet
S P E C I F I CAT I O N S H E E T
specifications
SmartZone™ Cabinets enable data centers, co-location facilities and remote sites with limited technical expertise and
financial resources, to easily order, rapidly install and deploy fully integrated cabinets. The SmartZone™ Cabinet is
pre-installed with SmartZone™ Power Solutions to provide a range of standardized, factory-integrated intelligent
cabinets with pre-tested, validated access control, power and thermal monitoring capabilities. SmartZone™ Rack
Monitoring Software uses operational data consolidated by the SmartZone™ Gateway and displays it on the intuitive
dashboard to provide a precise and logical reflection of the “actual” power and thermal data as well as the ability to
send alerts to identify rising temperatures or other issues that may impact business resilience.
This ready to deploy cabinet solution provides data centers with a complete DCIM solution that is immediately
ready to begin delivering the transparency and actionable information needed to optimize energy and operational
efficiencies, fully maximize existing capacity and protect the uptime of service.
technical information
Compliance:
EIA-310-E
TIA/EIA-942
UL2416
solution components
Net-Access™ N-Type or S-Type Cabinets with cage nut rails and jumper kit, (RGCBNJ660P22)
SmartZone™ Gateway EPA126
SmartZone™ Rack Monitoring Software
SmartZone™ Temperature Sensors
SmartZone™ Gateway-Enabled Rack PDUs (select from a variety of models including some with options for aggregate
or per outlet monitoring, with or without switching capabilities)
SmartZone™ Electronic Swinghandle with Electronic Keypad
SmartZone™ Door Sensors
key features and benefits
A Complete
DCIM Package
Integrated PDUs and sensors monitor power and thermal conditions through simple dashboards in the
DCIM software.
Physical Access
Security
Swinghandle locks are electronically controlled through included keypads for local access, with the ability
to remotely lock and unlock through a web interface. The DCIM software also enables monitoring and
documenting door access activity for added security.
Reduced time
to deploy
The cabinet is pre-installed with all the SmartZone™ Components including specially designed cabinet
pathways integrated into the door to conceal the cables and looms to the pre-wired and connected
gateway, sensors and PDUs.
Simplicity and
ease of ordering
The SmartZone™ Cabinet uses a single orderable part number for a complete cabinet and DCIM
solution, simplifying procurement and removing the need for developing a complex bill of materials.
applications
The SmartZone™ Cabinet is ideal for government, universities, healthcare facilities, financial institutions, and other segments
who are either building a new data center, or retrofitting a current data center with new cabinets for the purpose of integrating
DCIM locally or across multiple campuses or locations.
By monitoring and documenting power and thermal conditions, via SmartZone™ Rack Monitoring Software, the pre-installed
SmartZone™ Cabinet provides transparency to true power consumption at the cabinet level or down to the individual outlet
(depending upon the rack PDU configured in the cabinet), as well as the thermal conditions within the cabinet. This information
can help users to realize how their power and cooling is being consumed, enabling them to take action to optimize operations,
maximize capacity, or even help support regulatory standards.
In colocation settings, monitoring cabinet and per-outlet levels of power helps to calculate true power consumption to support
detailed billing power. Thermal monitoring and documentation helps to ensure that all operating conditions within the cabinet are
well within service level agreements.
Real-time monitoring and documentation enables all users to proactively identify power or thermal concerns that might impact
reliability of service. If power or thermal levels begin to reach hazardous threshold limits (such as rising temperatures) the DCIM
software can send alerts and notifications to Data Center Operators warning them of potential issues that need to be
addressed, avoiding costly downtime.
w w w. p a n d u it.c o m
SmartZone™ Cabinet
solution components
Gateway EPA126 collects
data and sends to software
DCIM Power and Environmental
Monitoring Software
Door Sensor
that indicates open
and close status
Door Access Control
that indicates lock and
unlock status and allows
remote entry
Thermal Sensor
that monitors temperature
and can send alerts
Integral Pathways that conceal
unsightly cables and looms
SmartZone™ Cabinet N-Type or
S-Type Cabinets are integrated with
SmartZone™ Hardware Components
Mesh common bonding
network (MCBN) jumper kit
Gateway-Enabled Rack PDUs that
depending on the configuration chosen,
can provide per outlet or aggregate
monitoring and/or switching capabilities
Component
Capability
(1) Net-Access™ Cabinet
A choice of Net-Access™ N-Type or S-Type Cabinets with modified front single hinge
doors and split rear doors specifically designed to conceal SmartZone™ cabling and
components. An integrated cable management tray behind installed gateway keeps
cables and cords well organized. Cage nut rails are included for easy installation
of equipment.
(1) SmartZone ™ Gateway EPA126
Consolidates all data captured from the connected power devices, sensors, and
door access controls through one IP address.
(1) SmartZone ™ Rack Monitoring Software
Uses operational data consolidated by the SmartZone™ Gateway. The
easy-to-understand dashboard provides a precise and logical reflection of the “actual”
power and thermal data as well as alerting to identify rising temperatures or other
issues that may impact business resilience.
(4) SmartZone ™ Temperature Sensors
Enables data capture of relative temperature conditions at both the front and the rear of
the cabinet.
(2) SmartZone ™ Gateway-Enabled Rack PDUs
A choice of SmartZone™ Gateway-Enabled Rack PDUs that include models with
options for aggregate or per outlet monitoring, as well as switching capabilities.
(2) SmartZone™ Electronic Swinghandles with
(1) Electronic Keypad
Provides access control to cabinet doors.
(2) SmartZone™ Door Sensors
Used to detect the physical open/close status of a cabinet door.
(1) Jumper Kit RGCBNJ660P22
Allows the cabinets to be easily grounded
ww w. pa n d u it.c o m
SmartZone™ Cabinet
solution components
Configurations
without side panels
16A, 1Ø
Monitor only
32A, 1Ø
Monitor only
32A, 1Ø
Monitor & Control
(Switchable)
32A, 1Ø
Monitor per outlet &
Control (Switchable)
32A, 3Ø
Monitor only
Includes (2) PDUs
GM-A0262BL
GM-A0265BL
GMS-A0281BL
GMSPO-A0290BL
GM-A0258BL
42RU
S6229BXZ1
S6229BXZ2
S6229BXZ3
S6229BXZ4
S6229BXZ5
45RU
S6529BXZ1
S6529BXZ2
S6529BXZ3
S6529BXZ4
S6529BXZ5
48RU
S6829BXZ1
S6829BXZ2
S6829BXZ3
S6829BXZ4
S6829BXZ5
42RU
S8229BXZ1
S8229BXZ2
S8229BXZ3
S8229BXZ4
S8229BXZ5
45RU
S8529BXZ1
S8529BXZ2
S8529BXZ3
S8529BXZ4
S8529BXZ5
48RU
S8829BXZ1
S8829BXZ2
S8829BXZ3
S8829BXZ4
S8829BXZ5
42RU
N8219BEXZ1
N8219BEXZ2
N8219BEXZ3
N8219BEXZ4
N8219BEXZ5
45RU
N8519BEXZ1
N8519BEXZ2
N8519BEXZ3
N8519BEXZ4
N8519BEXZ5
48RU
N8819BEXZ1
N8819BEXZ2
N8819BEXZ3
N8819BEXZ4
N8819BEXZ5
42RU
N8229BEXZ1
N8229BEXZ2
N8229BEXZ3
N8229BEXZ4
N8229BEXZ5
45RU
N8529BEXZ1
N8529BEXZ2
N8529BEXZ3
N8529BEXZ4
N8529BEXZ5
48RU
N8829BEXZ1
N8829BEXZ2
N8829BEXZ3
N8829BEXZ4
N8829BEXZ5
Configurations with side panels
16A, 1Ø
Monitor only
32A, 1Ø
Monitor only
32A, 1Ø
Monitor & Control
(Switchable)
32A, 1Ø
Monitor per outlet &
Control (Switchable)
32A, 3Ø
Monitor only
Includes (2) PDUs
GM-A0262BL
GM-A0265BL
GMS-A0281BL
GMSPO-A0290BL
GM-A0258BL
42RU
S6222BXZ1
S6222BXZ2
S6222BXZ3
S6222BXZ4
S6222BXZ5
45RU
S6522BXZ1
S6522BXZ2
S6522BXZ3
S6522BXZ4
S6522BXZ5
48RU
S6822BXZ1
S6822BXZ2
S6822BXZ3
S6822BXZ4
S6822BXZ5
42RU
S8222BXZ1
S8222BXZ2
S8222BXZ3
S8222BXZ4
S8222BXZ5
45RU
S8522BXZ1
S8522BXZ2
S8522BXZ3
S8522BXZ4
S8522BXZ5
48RU
S8822BXZ1
S8822BXZ2
S8822BXZ3
S8822BXZ4
S8822BXZ5
42RU
N8212BEXZ1
N8212BEXZ2
N8212BEXZ3
N8212BEXZ4
N8212BEXZ5
45RU
N8512BEXZ1
N8512BEXZ2
N8512BEXZ3
N8512BEXZ4
N8512BEXZ5
48RU
N8812BEXZ1
N8812BEXZ2
N8812BEXZ3
N8812BEXZ4
N8812BEXZ5
42RU
N8222BEXZ1
N8222BEXZ2
N8222BEXZ3
N8222BEXZ4
N8222BEXZ5
45RU
N8522BEXZ1
N8522BEXZ2
N8522BEXZ3
N8522BEXZ4
N8522BEXZ5
48RU
N8822BEXZ1
N8822BEXZ2
N8822BEXZ3
N8822BEXZ4
N8822BEXZ5
S-Type: 600 mm wide x 1200 mm deep
S-Type: 800 mm wide x 1200 mm deep
N-Type: 800 mm wide x 1070 mm deep
N-Type: 800 mm wide x 1200 mm deep
S-Type: 600 mm wide x 1200 mm deep
S-Type: 800 mm wide x 1200 mm deep
N-Type: 800 mm wide x 1070 mm deep
N-Type: 800 mm wide x 1200 mm deep
To find out more about world class Panduit DCIM solutions and SmartZone™ Power Hardware, please visit http://www.panduit.com/smartzone or contact your sales
representative who will be happy to arrange a consultation with you. Individual spec sheets for each of the hardware components are available on www.panduit.com
WORLDWIDE SUBSIDIARIES AND SALES OFFICES
PANDUIT CANADA
Markham, Ontario
cs-cdn@panduit.com
Phone: 800.777.3300
PANDUIT EUROPE LTD.
London, UK
cs-emea@panduit.com
Phone: 44.20.8601.7200
PANDUIT SINGAPORE PTE. LTD.
Republic of Singapore
cs-ap@panduit.com
Phone: 65.6305.7575
PANDUIT JAPAN
Tokyo, Japan
cs-japan@panduit.com
Phone: 81.3.6863.6000
PANDUIT LATIN AMERICA
Guadalajara, Mexico
cs-la@panduit.com
Phone: 52.33.3777.6000
PANDUIT AUSTRALIA PTY. LTD.
Victoria, Australia
cs-aus@panduit.com
Phone: 61.3.9794.9020
For a copy of Panduit product warranties, log on to www.panduit.com/warranty
For more information
Visit us at www.panduit.com
Contact Customer Service by email: cs@panduit.com
or by phone: 800.777.3300
©2015 Panduit Corp.
ALL RIGHTS RESERVED.
PVSP124--WW-ENG
8/2015