INCANTO SIRIUS
TECHNICAL DATA
Size
285(h) x 360(w) x 400(d)mm
Weight
9 kg
Capacity of water tank
2ltr
Pressure of pump
15 bar
Rating
1250W
Colour
Silver
FEATURES
GUARANTEE
SBS – Saeco Brewing System, which allows to make
coffee in a simple and quick way, for a perfect crema
every time
Two independent stainless steel boilers
Cup heating surface
Coffee beans container lid with gasket for long
lasting “aroma” – seals aroma in
Electric control panel
Adjustable coffee dispensing head in height and in
depth – for use with larger mugs
Removable drip tray and grounds tray for easy
cleaning
Adjustable coffee grinder with regulation of the
quantity of coffee
Water tank easily removable thanks to a handle
Removable brew group
Exclusive new panarello design for the dispensing of
hot water and the easy preparation of creamy
cappuccino
Swivel based support to simplify use and
maintenance
Ceramic grinder blades that lasts five times longer
than ordinary blades.
“Aqua Prima” water filter with filter replacement
indicator light.
Body casing material: stainless steel
12 months
Exclusions are any damage due to
negligence, power surges or loss of water
abuse,
REPAIR PROCEDURE
Customer to try and take machine to nearest Saeco
service centre to shorten the repair period or to
@home store where purchased
Customer to show proof of purchase
Saeco will collect machine from store
Repair shouldn’t take longer than 3 working days and
outlined areas 7 working days
Saeco will return machine to store or client can
collect from Saeco service centre
If customer wants Saeco to collect machine
from their home or office, a collection fee
will be charged
205A Jan Smuts Avenue
Rosebank
Johannesburg
South Africa
Tel: +27 11 447 4703
The Foundry Prestwich Street
Greenpoint
Cape Town
South Africa
Tel: +27 21 425 6169
52 Hannah Road
Congella
Durban
South Africa
Cell: +27 082 410 4774
www.saeco.co.za 08611SAECO (72326)
Fax: +27 11 880 6536
Fax: +27 21 425 6171
Fax: +27 31 206 2049
HOW TO USE THE INCANTO SIRIUS
Bean container
Pre-ground coffee
Water tank
3 programmable
cup sizes
Cup warming plate
Steam knob
SBS
Height and depth
adjustable
dispensing head
Hot water/Steam nozzle
ON/OFF switch
Drip tray
1.
Open the bean grinder and pour in espresso beans.
The grinder has 1 setting:
•
Knob adjust the grind – the coarser ( ) the grind, the weaker the coffee; the finer ( •) the grind, the
stronger the coffee (••
••••)
2.
Adjust the grinder according to desired taste.
Note: the grinder takes approximately 3 grinds (i.e. 3 coffees) to adjust.
3.
Put COLD water into the water reservoir – lift the lid on the tank or remove the tank and take to tap.
4.
Switch the machine on (use the power button at the back of the machine). It takes 60 seconds for the
ready lights to stop flashing and go green. (Don’t leave the machine on for longer than about 2 hours at
a time).
5.
Press one of the 3 cup sizes for the amount of water you want to use – the more water, the weaker the
coffee and the more the volume (i.e. To program the cup sizes you have to press the cup size you want
to program and hold the button in until the coffee starts pouring out, when you are satisfied with the
coffee level, release the button. It will now be permanently programmed on that size until reprogrammed)
6.
Turn the SBS button to adjust the brewing of the coffee. The adjustment can be made while brewing
the coffee. The adjustment will have an immediate effect on the coffee brewed. If you turn the button to
the right, it will give you a strong espresso coffee. If you turn the button to the left it will give you a mild
espresso coffee, and in the middle it will give you a medium espresso coffee.
7.
Check: water is in, machine is ready, beans are in bean hopper and cup is placed under dispensing
head.
8.
Place one or two cups under cup dispensing head and press the one of the cup sizes. If you press the
button twice then you can make two cups at the same time
205A Jan Smuts Avenue
Rosebank
Johannesburg
South Africa
Tel: +27 11 447 4703
The Foundry Prestwich Street
Greenpoint
Cape Town
South Africa
Tel: +27 21 425 6169
52 Hannah Road
Congella
Durban
South Africa
Cell: +27 082 410 4774
www.saeco.co.za 08611SAECO (72326)
Fax: +27 11 880 6536
Fax: +27 21 425 6171
Fax: +27 31 206 2049
9.
This is an automatic machine, so the machine will stop once reached desired level, however you can
stop it by repressing the button. Wait for the drips to finish.
FROTHING THE MILK – INCANTO SIRIUS
Steam knob
Steam nozzle
1. Use a heatproof container (a metal or ceramic jug).
2. Fill the container about half full or less with milk.
3. Prime the steam tube first by opening the steam knob (on the right hand side of the machine to let the initial
water out.) Do this until it is only steam coming out.
4. Place the jug with milk under the steam tube and turn the steam knob towards yourself.
5. For the first few seconds, hover the steam nozzle just below the surface of the milk (about 4 cm).
6. After the first few seconds, raise and lower the nozzle into the milk to heat the milk.
7. Once foam has formed, submerge the nozzle into the milk to heat the milk.
8. Close the knob when done. Knock the jug a few times to get the air out, otherwise the froth will collapse.
9. Wipe the steam tube clean with a damp cloth, to prevent milk encrustations.
10. It is easier to froth ice-cold milk (full cream long-life milk is better but a good quality foam can be produced
with 2% low fat or skim milk)
HOW TO PUT THE WATER FILTER INTO THE WATER TANK
1. Remove the filter from the packing container.
2. Adjust the dater to the current month.
205A Jan Smuts Avenue
Rosebank
Johannesburg
South Africa
Tel: +27 11 447 4703
The Foundry Prestwich Street
Greenpoint
Cape Town
South Africa
Tel: +27 21 425 6169
52 Hannah Road
Congella
Durban
South Africa
Cell: +27 082 410 4774
www.saeco.co.za 08611SAECO (72326)
Fax: +27 11 880 6536
Fax: +27 21 425 6171
Fax: +27 31 206 2049
3. Insert the applicator and turn it clockwise to secure it to the filter.
4. Check where the filter positioning and reference mark is.
5. Put the filter into the empty water tank.
6. The reference must be positioned in correspondence with the groove.
7. Press until the end limit.
8. Turn the applicator counter-clockwise and remove it from the tank.
9. Fill the tank with fresh drinkable water.
10. Position a container beneath the steam nozzle and turn the machine on.
11. Press the hot water button and open the knob to dispense water.
12. Empty the water tank out at intervals.
13. When the tank is empty, fill it again with fresh drinkable water.
14. Please note: you do not need the filter to use the coffee machine. The machine can be used without it.
DESCALING THE INCANTO SIRIUS
1. We advise that the machine be descaled every 6 months. Never use vinegar as a descaling agent. You can
use any commercially available non-toxic, non-harmful descaling product for coffee machines. We
recommend using a Saeco descaling agent.
2. First remove the filter.
3. Switch off the machine
4. Fill the water tank and add the descaling solution.
5. Place a large container under the steam nozzle.
6. Switch the machine on.
7. Press the descaling button (last button on the right hand side) for 5 seconds.
8. Open the steam knob. The descaling process starts.
9. The solution will be discharged at intervals.
10. This process takes approximately 45 minutes.
11. The lights will flash to signal descaling is over.
12. Close the knob and remove container.
13. Rinse out the tank and fill it with fresh drinking water.
205A Jan Smuts Avenue
Rosebank
Johannesburg
South Africa
Tel: +27 11 447 4703
The Foundry Prestwich Street
Greenpoint
Cape Town
South Africa
Tel: +27 21 425 6169
52 Hannah Road
Congella
Durban
South Africa
Cell: +27 082 410 4774
www.saeco.co.za 08611SAECO (72326)
Fax: +27 11 880 6536
Fax: +27 21 425 6171
Fax: +27 31 206 2049
14. Place a large container under the steam tube.
15. Open the knob to rinse.
16. When no water is left, turn the knob to close the valve. Remove the container.
17. After descaling is complete, install the filter cartridge again in the water tank.
18. Your machine will now be ready again to make coffee.
205A Jan Smuts Avenue
Rosebank
Johannesburg
South Africa
Tel: +27 11 447 4703
The Foundry Prestwich Street
Greenpoint
Cape Town
South Africa
Tel: +27 21 425 6169
52 Hannah Road
Congella
Durban
South Africa
Cell: +27 082 410 4774
www.saeco.co.za 08611SAECO (72326)
Fax: +27 11 880 6536
Fax: +27 21 425 6171
Fax: +27 31 206 2049