FLUID COMPONENTS
1-320-243-8030 FAX
TABLE OF CONTENTS - FLUID COMPONENTS
a. NYLON & POLYPROPYLENE, FITTINGS p2-10
b. STAINLESS STEEL FITTINGS p11-13
Nylon and polypro fittings including
Pipe fittings, hose barb fittings, and
threaded nozzle fittings.
Stainless steel fittings including elbows,
tees, couplings, nipples, unions, and
plugs.
c. BRASS FITTINGS p14-15
d. BOOMLESS SPRAY NOZZLES p16
Garden hose fittings, hose barb
fittings, and nozzle fittings.
e. VALVES p17-20
Extensive selection
of valves in brass, stainless steel,
polypropylene & plastic 2-way & 3-way
polypropylene valves. Full port brass &
stainless steel ball valves. Mini brass ball
valves.
g. PANEL MOUNT FLOWMETERS p29
f. ACCESSORIES p21-28
Tank lids, bulkhead fittings, clamps,
Polypropylene pipe - Bulk or predrilled for nozzle fittings.
Garden hose shut-off valves. Spot
Sprayer accessories.
h. STRAINERS p30-33
Nylon and Polypropylene line
strainers from 1/4” to 1-1/2”.
Available with clear or solid bowl
and with Viton or EPDM O-rings.
j. SPRAYER PARTS & WHEELS p35-39
i. GAUGES p34
Backpack sprayer, spray guns.
Wheels and Axles.
Dry pressure gauges, 304
stainless steel gauges,
full 304 stainless steel
gauges.
k. COMET PUMPS p40-41
Comet Diaphragm Pumps
and Accessories.
New
l. HOSE REELS p42
1
www.valleyind.com
FLUID COMPONENTS
1-800-864-1649 TOLL FREE
PIPE FITTINGS
Sold in full bag quantities only
NYLON PIPE FITTINGS
NYLON FITTINGS
Our nylon fittings are made from high quality type 6
virgin resin. Nylon fittings are generally acceptable for
use at working pressures up to 150 PSI at normal room
temperatures. At very low pressures, temperatures can
approach 175° F with no degradation.
Nylon is resistant to a broad range of chemicals including most agricultural chemicals, ammonium compounds,
detergents, diesel fuel, ethanol, gasoline, hexane, magnesium sulphate, most sodium compounds, trichloroethylene and zinc sulphate.
Nylon fittings should Not be used with acid-based fertilizers, bromine, chlorine, fluorine, hydrochloric acid, iodine,
nitric acid, phosphoric acid, sulfuric acid and xylene.
Recommended
Use for high structural or
physical strength
Use for temperature from
below 0° F to 200° F
Use Teflon® tape
Not Recommended
Use with acid-based fertilizers
Use with xylene-based chemicals
Use in situations with extreme
exposure to ultraviolet radiation
Physical Properties of Nylon
Specific Gravity
1.12
Heat Distortion
375° F
Rockwell Hardness (R)
120
Izod Impact
1.0 ft. - lbs./in
POLYPROPYLENE FITTINGS
Recommended
Not Recommended
Use at normal ag sprayer
Use impact wrenches
spring and summer field
conditions
Use for acid resistance
Overtighten
Use at very hot or cold temperature
Use for UV resistance, proover 150° F or under 32° F
longed exposure to sunlight.
Polypropylene is resistant to a broad range of chemicals in- Use for cosmetic appearance Use Teflon tape or Teflon sealants
Use with toluene or xylene based
cluding most agricultural chemicals, acid based fertilizers,
ammonium compounds, calcium carbonate, ethanol, hychemicals
drochloric acid, magnesium sulfate, oxalic acid, proprionic
Physical Properties of Polypropylene
acid, phosphoric acid and sodium compounds.
Specific Gravity
0.98
Polypropylene fittings should not be used with aromatic Heat Distortion
285° F
hydrocarbons, carbon tetrachloride, gasoline, hexane, Rockwell Hardness (R)
100
kerosene, nitric acid, sodium hypochlorite, toluene trichlo- Izod Impact
0.8 ft. - lbs./in
roethylene and xylene.
Our polypropylene fittings are made 10% glass polypropylene resin. Polypropylene fittings are generally acceptable for use at working pressures up to 150 PSI at ambient temperatures. As with all thermoplastics, an increase
in working temperature is accompanied by a decrease in
operating pressure.
FEMALE FITTINGS
ABBREVIATIONS
MPS:
FPS:
HB:
MPT:
MGHT:
FGHT:
NPT:
FPT:
FBSP:
Male Pipe Straight
Female Pipe Straight
Hose Barb
Male National Pipe Thread
Male Garden Hose Thread
Female Garden Hose Thread
National Pipe Thread
Female National Pipe Thread
Female British Straight Pipe
2
www.valleyind.com
FPTxHB
x
x
x
x
x
x
x
x
x
x
x
x
x
x
Bag Qty.
50
50
50
50
50
50
50
25
25
25
25
25
25
25
Nylon
A14F
A1438F
A3814F
A38F
A3812F
A1214F
A1238F
A12F
A1258F
A1234F
A3438F
A3412F
A3458F
A34F
PolyPro
3A14F
3A1438F
3A3814F
3A38F
3A3812F
3A1214F
3A1238F
3A12F
3A1258F
3A1234F
3A3438F
3A3412F
3A3458F
3A34F
FLUID COMPONENTS
1-320-243-8030 FAX
Sold in full bag quantities only
PIPE FITTINGS
MALE FITTINGS
MPTxHB
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x1
1x
1x1
1x1
1 x
1 x1
1 x1
1 x1
1 x1
1 x1
2x2
Bag Qty.
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
25
25
25
25
25
25
25
25
25
25
25
1
1
1
1
1
1
1
Nylon
A18316
A1814
A18516
A1838
A14316
A14
A14516
A1438
A1412
A3814
A38516
A38
A3812
A3858
A1214
A1238
A12
A1258
A1234
A3414
A3438
A3412
A3458
A34
A34100
A10034
A100
A100114
A11434
A114100
A114
A114112
A112114
A112
A200
MALE ELBOWS
PolyPro
3A18316
3A1814
3A18516
3A1838
3A14316
3A14
3A14516
3A1438
3A1412
3A3814
3A38516
3A38
3A3812
3A3858
3A1214
3A1238
3A12
3A1258
3A1234
3A3414
3A3438
3A3412
3A3458
3A34
3A34100
3A10034
3A100
3A100114
3A11434
3A114100
3A114
3A114112
3A112114
3A112
3A200
MPTxHB
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x1
1x1
Bag Qty.
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
25
25
25
25
25
25
25
25
25
Nylon
EL1814
EL1838
EL14316
EL14
EL14516
EL1438
EL1412
EL3814
EL38516
EL38
EL3812
EL3858
EL1214
EL1238
EL12
EL1258
EL1234
EL3414
EL3438
EL3412
EL3458
EL34
EL34100
EL100
PolyPro
3EL1814
3EL1838
3EL14316
3EL14
3EL14516
3EL1438
3EL1412
3EL3814
3EL38516
3EL38
3EL3812
3EL3858
3EL1214
3EL1238
3EL12
3EL1258
3EL1234
3EL3414
3EL3438
3EL3412
3EL3458
3EL34
3EL34100
3EL100
FEMALE ELBOWS
FPTxHB
x
x
x
x
x
x
x
x
x
x
x
x
x
Bag Qty.
50
50
50
50
50
50
50
50
25
25
25
25
25
Nylon
EL1814F
EL1838F
EL14316F
EL14F
EL1438F
EL3814F
EL38F
EL3812F
EL1258F
EL1234F
EL3412F
EL3458F
EL34F
PolyPro
3EL1814F
3EL1838F
3EL14316F
3EL14F
3EL1438F
3EL3814F
3EL38F
3EL3812F
3EL1258F
3EL1234F
3EL3412F
3EL3458F
3EL34F
3
www.valleyind.com
FLUID COMPONENTS
1-800-864-1649 TOLL FREE
PIPE FITTINGS
Sold in full bag quantities only
STREET ELBOWS
FPTxMPT
x
x
x
x
Bag Qty.
25
25
25
10
Nylon
SE14
SE38
SE12
SE34
STREET ELBOWS 45°
PolyPro
3SE14
3SE38
3SE12
3SE34
FPTxMPT
x
TEES ¼ GAUGE PORT
FPT
Bag Qty.
25
1
Nylon
GTT1214
GTT3414
TEES
FPT
1
1
1
2
Bag Qty.
25
25
25
1
1
1
1
4
www.valleyind.com
Nylon
TT14
TT12
TT34
TT100
TT114
TT112
TT200
Bag Qty.
10
Nylon
SE3445
PolyPro
3SE3445
REDUCER BUSHINGS
PolyPro
3GTT1214
3GTT3414
New
PolyPro
3TT14
3TT12
3TT34
3TT100
3TT114
3TT112
3TT200
MPTxFPT
x
x
x
x
x
x
x
x
x
1x
1x
2x
Bag Qty.
50
50
50
50
50
25
25
25
25
25
25
1
Nylon
RB3818
RB3814
RB1218
RB1214
RB1238
RB3418
RB3414
RB3438
RB3412
RB10012
RB10034
RB20034
PolyPro
3RB3818
3RB3814
3RB1218
3RB1214
3RB1238
3RB3418
3RB3414
3RB3438
3RB3412
3RB10012
3RB10034
3RB20034
FLUID COMPONENTS
1-320-243-8030 FAX
Sold in full bag quantities only
PIPE FITTINGS
NIPPLES
MPTxMPT
x
x
x
x
x
1x1
1 x1
1 x1
2x2
Bag Qty.
50
50
50
50
25
25
1
1
1
Nylon
M18
M14
M38
M12
M34
M100
M114
M112
M200
PolyPro
3M18
3M14
3M38
3M12
3M34
3M100
3M114
3M112
3M200
REDUCING NIPPLES
MPTxMPT
x
x
x
x
x
x
x
Bag Qty.
50
50
50
50
50
25
25
FPTxFPT
x
x
1x1
1 x1
1 x1
2x2
Bag Qty.
50
10
10
1
1
1
HEX PLUGS
MPT
1
1
1
2
Bag Qty.
50
50
50
50
25
25
1
1
1
Nylon
F18
F14
F38
F12
F34
F100
F114
F112
F200
Nylon
M1418
M3818
M3814
M1214
M1238
M3438
M3412
PolyPro
3M1418
3M3818
3M3814
3M1214
3M1238
3M3438
3M3412
COUPLINGS
PolyPro
3F18
3F14
3F38
3F12
3F34
3F100
3F114
3F112
3F200
Nylon
FC12
FC34
FC100
FC114
FC112
FC200
PolyPro
3FC12
3FC34
3FC100
3FC114
3FC112
3FC200
5
www.valleyind.com
FLUID COMPONENTS
1-800-864-1649 TOLL FREE
HOSE BARB FITTINGS
Sold in full bag quantities only
HOSE MENDERS
HBxHB
x
x
x
x
x
x
x
1x1
1 x1
1 x1
With Center Stop
Bag Qty. Nylon
50
SHM14
50
SHM38
50
SHM1238
50
SHM12
25
SHM1258
25
SHM58
25
SHM34
25
SHM100
1
SHM114
1
SHM112
TEES
HB xHB
x
x
x
x
x
x
x
x
x
x
1
PolyPro
3SHM14
3SHM38
3SHM1238
3SHM12
3SHM1258
3SHM58
3SHM34
3SHM100
3SHM114
3SHM112
2/3
Bag Qty.
50
50
50
50
25
25
1
1
1
1
Bag Qty.
50
50
50
50
50
50
25
25
6
www.valleyind.com
Nylon
HM14316
HM14
HM516
HM3814
HM1214
HM1238
HM5838
HM58
PolyPro
3T14
3T1438
3T38
3T3812
3T3858
3T1238
3T12
3T58
3T3412
3T34
TEES
HOSE MENDERS
HBxHB
x
x
x
x
x
x
x
x
Nylon
T14
T1438
T38
T3812
T3858
T1238
T12
T58
T3412
T34
PolyPro
3HM14316
3HM14
3HM516
3HM3814
3HM1214
3HM1238
3HM5838
3HM58
MPTxHB
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
Bag Qty.
50
50
50
50
50
50
50
50
50
25
25
25
25
25
25
Nylon
T1814T
T14T
T1438T
T1412T
T3814T
T38T
T3812T
T1238T
T12T
T1258T
T1234T
T3438T
T3412T
T3458T
T34T
PolyPro
3T1814T
3T14T
3T1438T
3T1412T
3T3814T
3T38T
3T3812T
3T1238T
3T12T
3T1258T
3T1234T
3T3438T
3T3412T
3T3458T
3T34T
FLUID COMPONENTS
1-320-243-8030 FAX
Sold in full bag quantities only
HOSE BARB FITTINGS
HOSE FITTINGS
MGHTxHB
x
x
x
x
x
Bag Qty.
25
25
25
25
25
FGHTxMPT
x
Bag Qty.
25
Nylon
D3414
D3438
D3412
D3458
D34
ELBOWS
PolyPro
3D3414
3D3438
3D3412
3D3458
3D34
MGHTxHB
x
x
x
x
x
PolyPro
3H34
MGHTxFPT
x
x
x
ADAPTERS
Nylon
H34
Bag Qty.
25
25
25
25
25
Bag Qty.
50
50
50
50
50
50
25
25
25
25
Nylon
EL14HB
EL3814HB
EL38HB
EL1214HB
EL1238HB
EL12HB
EL58HB
EL3458HB
EL34HB
EL100HB
PolyPro
3ELD3414
3ELD3438
3ELD3412
3ELD3458
3ELD34
ADAPTERS
Bag Qty.
25
25
25
Nylon
G3414
G3412
G34
PolyPro
3G3414
3G3412
3G34
TEES
ELBOWS
HBxHB
x
x
x
x
x
x
x
x
x
1x1
Nylon
ELD3414
ELD3438
ELD3412
ELD3458
ELD34
PolyPro
3EL14HB
3EL3814HB
3EL38HB
3EL1214HB
3EL1238HB
3EL12HB
3EL58HB
3EL3458HB
3EL34HB
3EL100HB
FPTxHB
x
Bag Qty.
25
Nylon
T34F
PolyPro
3T34F
7
www.valleyind.com
FLUID COMPONENTS
1-800-864-1649 TOLL FREE
HOSE BARB FITTINGS
Sold in full bag quantities only
ADAPTERS
MGHTxMPT
x
x
x
Bag Qty.
25
25
25
Nylon
E3438
E3412
E34
ADAPTER COUPLINGS
PolyPro
3E3438
3E3412
3E34
FGHTxFPT
x
PolyPro
3I34
FGHT
Bag Qty.
25
ADAPTERS
MGHTxFGHT Bag Qty.
x
25
Nylon
I34
Nylon
J3412
PolyPro
3J3412
CAPS
Bag Qty.
25
Nylon
N34
PolyPro
3N34
ASSORTED FITTINGS
FLAT SEAT HOSE BARB
FITTINGS
FPTxHB
x
x
Bag Qty.
50
25
Nylon
Q14
Q12
PolyPro
3Q14
3Q12
HB
1
8
www.valleyind.com
For use with B34 & 3B34 Swivel Nuts
Bag Qty.
Nylon
PolyPro
25
C14
3C14
25
C38
3C38
25
C12
3C12
25
C58
3C58
25
C34
3C34
25
C100
3C100
FLUID COMPONENTS
1-320-243-8030 FAX
Sold in full bag quantities only
THREADED NOZZLE FITTINGS
STRAIGHT SWIVEL NUT
STRAIGHT SWIVEL NUT
FGHT
Bag Qty.
25
Nylon
B34
PolyPro
3B34
FPT
1
Bag Qty.
25
MPSxHB
x
x
PolyPro
338D
33812D
Hose barb with nozzle thread “T” standard nozzle
body  Includes B12 Nut
MPSxHB
Bag Qty. Nylon
PolyPro
x
50
NTT38
3NTT38
x
50
NTT12
3NTT12
x
50
NTT58
3NTT58
x
25
NTT34
3NTT34
ELBOWS
Hose barb with nozzle thread “L” standard nozzle
body  Includes B12 Nut
MPSxHB
Bag Qty. Nylon
PolyPro
x
50
NTL14
3NTL14
x
50
NTL38
3NTL38
x
50
NTL12
3NTL12
x
25
NTL58
3NTL58
x
25
NTL34
3NTL34
PolyPro
3B100
TEES
STRAIGHT HB WITH NOZZLE THREAD
 Includes B12 Nut
Bag Qty. Nylon
50
38D
50
3812D
Nylon
B100
HOSE BARB FOR 8027 NUT
HB
Bag Qty.
25
25
25
Nylon
K8414
K8438
K8412
PolyPro
3K8414
3K8438
3K8412
9
www.valleyind.com
FLUID COMPONENTS
1-800-864-1649 TOLL FREE
THREADED NOZZLE FITTINGS
Sold in full bag quantities only
NOZZLE RETAINING NUT
FPS
Bag Qty.
25
Nylon
B12
CROSSES
PolyPro
3B12
MPSxHB
x
x
x
Includes B12 Nut
Bag Qty. Nylon
50
T38C
50
T12C
50
T34C
FPS x FPT
x
Female spray tip adaptor
Bag Qty. Nylon
PolyPro
25
NF1614
3NF1614
PolyPro
3T38C
3T12C
3T34C
NOZZLE NUT
FPS
Bag Qty.
25
Nylon
8027
PolyPro
38027
SPRAY TIP ADAPTER
NIPPLE
MPSxMPT
x
x
Bag Qty.
50
50
Nylon
NB1614
NB1612
PolyPro
3NB1614
3NB1612
NOZZLE CAP
FPS
CROSS 1/4” GAUGE PORT
Gauge Port Bag Qty.
x FNPT
x
25
10
www.valleyind.com
New
Nylon
Black Nylon
GCR1214
GCR1214-BN
Bag Qty.
25
Nylon
3942
PolyPro
33942
FLUID COMPONENTS
1-320-243-8030 FAX
STAINLESS STEEL FITTINGS
STAINLESS STEEL FITTINGS
STAINLESS STEEL FITTINGS
Our stainless steel fittings and pipe nipples are made from 304
or 316 stainless steel. Use with air, water, oil, natural gas, and
steam. Maximum pressure 150 PSI at 72°F.
‘304’ part number prefix designated 304 stainless steel.
‘316’ part number prefix designated 316 stainless steel.
FITTINGS
CAPS
316 Stainless Steel
NPT x HB
Part#
x
316-A14
x
316-A1438
x
316-A1412
x
316-A38
x
316-A3812
x
316-A12
x
316-A34
x1
316-A34100
1x1
316-A100
1 x1
316-A114
316-A112
1 x1
2x2
316-A200
3x3
316-A300
4x4
316-A400
Stainless Steel
FPT
1
1
1
2
3
4
ABBREVIATIONS
MPS:
FPS:
HB:
MPT:
MGHT:
FGHT:
NPT:
FPT:
FBSP:
Male Pipe Straight
Female Pipe Straight
Hose Barb
Male National Pipe Thread
Male Garden Hose Thread
Female Garden Hose Thread
National Pipe Thread
Female National Pipe Thread
Female British Straight Pipe
CROSSES
Part#
304-CP18
304-CP14
304-CP38
304-CP12
304-CP34
304-CP100
304-CP114
304-CP112
304-CP200
304-CP300
304-CP400
Stainless Steel
FPT
1
1
1
2
3
4
Part#
304-CR18
304-CR14
304-CR38
304-CR12
304-CR34
304-CR100
304-CR114
304-CR112
304-CR200
304-CR300
304-CR400
11
www.valleyind.com
FLUID COMPONENTS
1-800-864-1649 TOLL FREE
STAINLESS STEEL FITTINGS
HEX PLUGS
Stainless Steel
MPT
1
1
1
2
3
4
Part#
304-F18
304-F14
304-F38
304-F12
304-F34
304-F100
304-F114
304-F112
304-F200
304-F300
304-F400
COUPLINGS
Stainless Steel
FPT x FPT
x
x
x
x
x
1x1
1 x1
1 x1
2x2
3x3
4x4
ELBOWS 45°
STREET ELBOW
Stainless Steel
FPT x FPT
x
x
x
x
x
1x1
1 x1
1 x1
2x2
3x3
4x4
Stainless Steel
FPT x NPT
x
x
x
x
x
1x1
1 x1
1 x1
2x2
3x3
4x4
12
www.valleyind.com
Part#
304-LL185
304-LL145
304-LL385
304-LL125
304-LL345
304-LL1005
304-LL1145
304-LL1125
304-LL2005
304-LL3005
304-LL4005
ELBOWS 90°
Part#
304-FC18
304-FC14
304-FC38
304-FC12
304-FC34
304-FC100
304-FC114
304-FC112
304-FC200
304-FC300
304-FC400
Stainless Steel
FPT x FPT
x
x
x
x
x
1x1
1 x1
1 x1
2x2
3x3
4x4
Part#
304-LL18
304-LL14
304-LL38
304-LL12
304-LL34
304-LL100
304-LL114
304-LL112
304-LL200
304-LL300
304-LL400
REDUCER BUSHINGS
Part#
304-SE18
304-SE14
304-SE38
304-SE12
304-SE34
304-SE100
304-SE114
304-SE112
304-SE200
304-SE300
304-SE400
Stainless Steel
MPT x FPT
x
x
x
x
x
x
1x
1x
1 x
1 x1
1 x
1 x1
1 x1
2x1
3x2
4x3
Part#
304-RB1418
304-RB3814
304-RB1218
304-RB1238
304-RB3414
304-RB3412
304-RB10012
304-RB10034
304-RB11434
304-RB114100
304-RB11234
304-RB112100
304-RB112114
304-RB200112
304-RB300200
304-RB400300
FLUID COMPONENTS
1-320-243-8030 FAX
STAINLESS STEEL FITTINGS
SQUARE HEAD PLUGS
TEES
Stainless Steel
MPT
Stainless Steel
FPT x FPT
1
1
1
2
3
4
Part#
304-SP18
304-SP14
304-SP38
304-SP12
304-SP34
304-SP100
304-SP114
304-SP112
304-SP200
304-SP300
304-SP400
1
1
1
2
3
4
UNIONS
Part#
304-TT18
304-TT14
304-TT38
304-TT12
304-TT34
304-TT100
304-TT114
304-TT112
304-TT200
304-TT300
304-TT400
Stainless Steel
FPT x FPT
1
1
1
2
3
4
Part#
304-UN18
304-UN14
304-UN38
304-UN12
304-UN34
304-UN100
304-UN114
304-UN112
304-UN200
304-UN300
304-UN400
NIPPLE
NIPPLE (cont)
NIPPLE (cont)
Stainless Steel, Schedule 40
MPT
Part#
x
304-1834
x1
304-18112
x2
304-18200
x2
304-18212
x3
304-18300
x3
304-18312
x4
304-18400
x5
304-18500
x6
304-18600
x
304-1478
x1
304-14112
x2
304-14200
x2
304-14212
x3
304-14300
x3
304-14312
x4
304-14400
x5
304-14500
x6
304-14600
x1
304-38100
x1
304-38112
x2
304-38200
x2
304-38212
x3
304-38300
x3
304-38312
x4
304-38400
x5
304-38500
x6
304-38600
x1
304-12118
x1
304-12112
Stainless Steel, Schedule 40
MPT
Part#
x2
304-12200
x2
304-12212
x3
304-12300
x3
304-12312
x4
304-12400
x5
304-12500
x6
304-12600
x1
304-34138
x1
304-34112
x2
304-34200
x2
304-34212
x3
304-34300
x3
304-34312
x4
304-34400
x5
304-34500
x6
304-34600
1x1
304-100112
1x2
304-100200
1x2
304-100212
1x3
304-100300
304-100312
1x3
1x4
304-100400
1x5
304-100500
1x6
304-100600
1 x1
304-114158
304-114200
1 x2
1 x2
304-114212
1 x3
304-114300
1 x3
304-114312
Stainless Steel, Schedule 40
MPT
Part#
1 x4
304-114400
304-114500
1 x5
1 x6
304-114600
1 x1
304-112134
304-112200
1 x2
1 x2
304-112212
304-112300
1 x3
304-112312
1 x3
1 x4
304-112400
1 x5
304-112500
1 x6
304-112600
2x2
304-200200
304-200212
2x2
2x3
304-200300
2x3
304-200312
2x4
304-200400
2x5
304-200500
2x6
304-200600
3x2
304-300258
3x3
304-300300
304-300312
3x3
3x4
304-300400
3x5
304-300500
3x6
304-300600
4x2
304-400278
4x4
304-400400
4x5
304-400500
4x6
304-400600
Other nipple lengths
available. Call for details.
13
www.valleyind.com
FLUID COMPONENTS
1-800-864-1649 TOLL FREE
BRASS FITTINGS
BRASS FITTINGS
ABBREVIATIONS
BRASS FITTINGS
MPS:
FPS:
HB:
MPT:
MGHT:
FGHT:
NPT:
FPT:
FBSP:
Our brass fittings are acceptable for most water uses and for most
petroleum applications such as gasoline and diesel fuel. Depending
on the design, brass fittings are usually acceptable for use at relatively high pressure (500 PSI) and at temperatures up to 800° F.
Brass fittings are not acceptable for use with nitrogen
compounds.
HOSE BARB MALE
GARDEN HOSE Q/C
Brass
Size
FGHT x Q/C.
Use with 900.137
MGHT x Q/C.
Use with 900.138
Part#
900.138
Brass
Size
MGHT x
MGHT x
HB x 2”
HB x 2”
Male Pipe Straight
Female Pipe Straight
Hose Barb
Male National Pipe Thread
Male Garden Hose Thread
Female Garden Hose Thread
National Pipe Thread
Female National Pipe Thread
Female British Straight Pipe
HOSE BARB SWIVEL
Part#
900.019
900.047
Brass
Size
FGHT x
FGHT x
HB x 2”
HB x 2”
Part#
900.021
900.034
900.137
900.138
HOSE BARB SWIVELS
Brass
Size
FBSP x
FBSP x
900.137
HB
HB
Part#
604.2A
604.3A
ADJUSTABLE NOZZLE
Brass
Size
FPS, #8
FPS, #18
NPT #18
NPT #8
NPT #24
Part#
900.040-8
900.040-18
900.054-18
900.054-8
900.054-24M
HEX GARDEN HOSE NIPPLE
Brass
Size
MPT x
MGHT
Part#
900.018
NOZZLE BODY ELBOW 90°
Brass
Size
HB x
HB x
14
www.valleyind.com
MPS
MPS
Part#
901.038
900.052
GARDEN HOSE ADAPTER
Brass
Size
FGHT x
FGHT x
MNPT
MNPT
Part#
300.119
300.120
FLUID COMPONENTS
1-320-243-8030 FAX
BRASS FITTINGS
FEMALE NOZZLE BODIES
NOZZLE BODY TEE
Brass
Size
FNPT x
Brass
Size
HB x
HB x
MPS
Part#
900.031
MPS
MPS
Part#
902.038
900.053
NOZZLE BODY CAP
Brass
Size
FPS (short)
FPS (deep)
Part#
900.002
900.006
900.002
900.006
MALE NOZZLE BODIES
Brass
Size
MNPT x
MPS
Part#
900.001
NOZZLE BLANK
NOZZLE CAP
Brass, Nozzle Cap
Size
FPS
Part#
900.025
Brass, Nozzle Body
Block-Off Plate
Part#
900.016
NOZZLE BODY SWIVEL
NOZZLE BODY SWIVEL
NOZZLE BODY SWIVEL
Brass, Single Nozzle
Size
FNPT x
MPS
Brass, Single Swivel
Size
Part#
MNPT x
MPS
900.049
Brass, Double Nozzle
Size
Part#
FNPT x
MPS
900.004
Part#
900.003
NOZZLE BODY SWIVEL
NOZZLE BALL VALVE
Brass, Double Nozzle
Size
Part#
MNPT x
MPS
900.050
Brass
Size
” FNPT x
” MPS
FILTER SCREEN
Part#
BBVL-23220
Nozzle Body Filter Screen
Size
Part#
Brass Filter Screen
900.009
15
www.valleyind.com
FLUID COMPONENTS
1-800-864-1649 TOLL FREE
BOOMLESS NOZZLES
STANDARD PATTERN BOOMLESS NOZZLES
Standard spray nozzles are available in right or left spray. Nozzle delivers a
directional spray pattern with back-spray to ensure overlap coverage when
mounted in pairs. Spray distance value at 36” mounted height. Mounting range
24” - 48”. All standard pattern boomless nozzles are a two piece construction.
PART #’S
Left Spray Pattern
BN2XP116LSX
BN2XP120LS-NT
BN2XP125LS
BN2XP140LS-NT
BN2XP152LS
BN2XP187LS
Right Spray Pattern
BN2XP116RSX
BN2XP120RS-NT
BN2XP125RS
BN2XP140RS-NT
BN2XP152RS
BN2XP187RS
Orifice Size
.116
.125
.125
.140
.152
.187
Construction
Stainless Steel Cap & Polypro Body
Stainless Steel Cap & Polypro Body
Stainless Steel Cap & Polypro Body
Stainless Steel Cap & Polypro Body
Stainless Steel Cap & Polypro Body
Stainless Steel Cap & Polypro Body
NARROW PATTERN BOOMLESS NOZZLES
Narrow pattern nozzles are available in right or left
spray. Nozzle delivers a concentrated pattern for
narrow band spray applications. Spray distance
value at 18” mounted height. Mounting rage 12” 24”. All narrow pattern boomless nozzles are a two
piece construction.
Left Spray Pattern
BN2XX187LN
Orifice Size
.187
Construction
Stainless Steel Cap
& Body
WIDE PATTERN BOOMLESS NOZZLES
Wide spray nozzles are available in various spray distance values. Nozzle delivers a full spray pattern. Designed for wide
band spray applications from a single mounted nozzle. Spray distance value at 36” mounted height. Mounting height 24”
- 48”. All wide pattern boomless nozzles are a two piece construction.
PART #’S
Full Spray Pattern
BN2XX152FWX
BN2XX187FW
Orifice Size
.152
.187
Construction
Stainless Steel Cap & Body
Stainless Steel Cap & Body
BN2XP116FW
BN2XP152FW
.116
.152
Stainless Steel Cap & Polypro Body
Stainless Steel Cap & Polypro Body
BN2BP088RSX
BN2BB088RSX
.088
.088
BN2BP125FWX
BN2BP125FWX-CS
BN2BP152FWX
BN2BP152FWX-CS
BN2BP187FW30
.125
.125
.152
.152
.187
16
www.valleyind.com
Brass Cap & Polypro Body
Brass Cap & Polypro Body
Brass Cap & Polypro Body
Brass Cap & Polypro Body
Brass Cap & Polypro Body
1-320-243-8030 FAX
FLUID COMPONENTS
BALL VALVES
MINI CHROME-BRASS
NYLON LEVER HANDLED
Inlet/Outlet
FNPT x FNPT
FNPT x MNPT
FNPT x FNPT
FNPT x MNPT
FNPT x FNPT
FNPT x MNPT
FNPT x FNPT
FNPT x MNPT
Part#
S34AX0
S34AZ0
S34BX0
S34BZ0
S34CX0
S34CZ0
S34DX0
S34DZ0
Features
• 200 PSI rating (CWP)
• -4° ► 250° F temperature rating
• Chromed brass body, ball and stem
• Teflon® seat and Viton® seals
BUTTERFLY T-HANDLE
Inlet/Outlet
FNPT x FNPT
FNPT x MNPT
FNPT x FNPT
FNPT x MNPT
FNPT x FNPT
FNPT x MNPT
FNPT x FNPT
FNPT x MNPT
Part#
S34AX1
S34AZ1
S34BX1
S34BZ1
S34CX1
S34CZ1
S34DX1
S34DZ1
Features
• 200 PSI rating (CWP)
• -4° ► 250° F temperature rating
• Chromed brass body, ball and stem
• Teflon® seat and Viton® seals
MINI CHROME-BRASS, ECONOMY
NYLON LEVER HANDLED
Inlet/Outlet
FNPT x FNPT
FNPT x MNPT
FNPT x FNPT
FNPT x MNPT
FNPT x FNPT
FNPT x MNPT
FNPT x FNPT
FNPT x MNPT
Part#
MVL18FF
MVL18FM
MVL14FF
MVL14FM
MVL38FF
MVL38FM
MVL12FF
MVL12FM
Features
• 200 PSI rating (CWP)
• -4° ► 250° F temperature rating
• Chromed brass body, ball and stem
• Teflon® seat and Viton® seals
BUTTERFLY T-HANDLE
Inlet/Outlet
FNPT x FNPT
FNPT x MNPT
FNPT x FNPT
FNPT x MNPT
FNPT x FNPT
FNPT x MNPT
FNPT x FNPT
FNPT x MNPT
Part#
MVT18FF
MVT18FM
MVT14FF
MVT14FM
MVT38FF
MVT38FM
MVT12FF
MVT12FM
Features
• 200 PSI rating (CWP)
• -4° ► 250° F temperature rating
• Chromed brass body, ball and stem
• Teflon® seat and Viton® seals
17
www.valleyind.com
FLUID COMPONENTS
1-800-864-1649 TOLL FREE
BALL VALVES
BRASS BALL VALVE, BUTTERFLY HANDLE
New
BRASS BALL VALVE STANDARD PORT
Inlet/Outlet
FNPT x FNPT
Part#
85-14B
FEATURES
• Investment Cast Body and Cap
• Teflon® seals and seats for smooth operation and proper seating
characteristics
• 1000 PSI rating (W.O.G.)
• -60° ► 450° F operating temperature
• Adjustable stem packing
• Blow-out proof stem and ball are made of 316 stainless steel
• Non-Locking Handle
• 1.5” Long
• One Piece Body
BRASS BALL VALVES
BALL VALVE, FULL PORT BRASS
FPT
1
1
1
2
D
H
7.6 hole
(option)
M
L
18
D
0.39
0.39
0.59
0.78
0.98
1.25
1.57
1.96
L
2.02
2.02
2.44
2.71
3.07
3.42
3.89
4.43
S
3.85
3.85
3.85
4.80
4.80
6.02
6.02
6.37
H
1.75
1.75
1.88
2.28
2.44
3.07
3.34
3.79
Features
• Investment Cast Body and Cap
• Teflon® seals and seats for smooth operation and proper seating
characteristics
• 600 PSI rating (W.O.G.) 100 PSI steam
• -40° to 366° F operating temperature
• Adjustable stem packing
• Blow-out proof stem
• Chrome plated brass ball
S
www.valleyind.com
Part#
BBV-14
BBV-38
BBV-12
BBV-34
BBV-100
BBV-114
BBV-112
BBV-200
FLUID COMPONENTS
1-320-243-8030 FAX
BALL VALVES
86 SERIES, STAINLESS STEEL
2 PIECE, 2000 PSI BALL VALVE
STANDARD PORT 316 STAINLESS STEEL HEAVY WALL
D
0.374
0.374
0.500
0.590
0.787
0.984
1.260
1.500
L
2.047
2.047
2.539
2.697
3.248
3.681
4.350
4.622
S
4.114
4.114
4.114
5.020
5.020
6.575
6.575
7.600
H
2.028
2.028
2.008
2.106
2.283
2.874
3.150
3.327
• Investment Cast Body and Cap
• Teflon® seals and seats for smooth operation and proper seating
characteristics
• 2000 PSI rating (W.O.G.)
• -60° ► 450° F operating temperature
• Adjustable stem packing
• Blow-out proof stem and ball are made of 316 stainless steel
• Locking device on handle
S
7.6 hole
(option)
D
1
1
1
2
Part#
86-14
86-38
86-12
86-34
86-100
86-114
86-112
86-200
H
FPT
L
88 SERIES, STAINLESS STEEL
2 PIECE, 1000 PSI BALL VALVE
FULL PORT 316 STAINLESS STEEL
D
0.456
0.456
0.562
0.787
0.984
1.260
1.496
1.969
2.520
2.992
L
1.831
1.890
2.520
2.913
3.425
3.976
4.331
5.197
5.710
7.362
S
4.094
4.094
4.094
4.843
4.843
6.063
6.063
7.441
9.606
9.606
H
1.890
1.890
2.047
2.402
2.559
3.150
3.307
3.819
5.354
5.709
• Investment Cast Body and Cap
• Teflon® seals and seats for smooth operation and proper seating
characteristics
• 1000 PSI rating (W.O.G.)
• -60° ► 450° F operating temperature
• Adjustable stem packing
• Blow-out proof stem and ball are made of 316 stainless steel
• Locking device on handle
S
D
1
1
1
2
2
3
Part#
88-14
88-38
88-12
88-34
88-100
88-114
88-112
88-200
88-212
88-300
H
FPT
L
19
www.valleyind.com
FLUID COMPONENTS
1-800-864-1649 TOLL FREE
VALVES
POLYPROPYLENE 2-WAY BALL VALVE
New
BALL VALVE, POLYPROPYLENE 2-WAY
FPT
Part#
PBV2-38
PBV2-12
PBV2-34
PBV2-100
PBV2-114
PBV2-112
PBV2-200
PBV2-212
1
1
1
2
2
A
2.36
2.36
2.36
2.87
3.15
3.42
4.33
4.84
C
B
1.65
1.65
1.65
1.65
1.65
1.93
1.93
1.77
C
1.65
1.65
1.65
2.09
3.03
3.15
5.12
3.54
D
0.63
0.63
0.63
0.79
0.79
0.79
0.79
0.98
E
2.32
2.32
2.32
2.72
3.23
3.90
4.53
5.71
F (NPT) G
0.91
0.91
0.91
1
0.91
1
0.98
2
1.10
2
1.18
2
1.73
H
1.71
1.71
1.71
1.83
2.11
2.46
2.87
4.06
I
1.75
1.75
1.75
2.05
2.17
2.50
2.97
4.29
L
3.46
3.46
3.46
3.88
4.27
4.96
5.85
8.35
B
D
A
F
E
Features
• Precision molded in glass reinforced polypropylene for strength
and chemical resistance
• Teflon® seats for smooth operation and proper sealing
characteristics
• EPDM o-rings to handle most fertilizers and many chemicals.
Viton® available on request
• Positive handle stops for turning off and on.
• Maximum operating pressure 240 PSI for sizes up to 2”, 150 PSI
for sizes over 2”
G
H
I
L
POLYPROPYLENE 3-WAY BALL VALVE
New
BALL VALVE, POLYPROPYLENE 3-WAY
FPT
1
1
1
2
Part#
PBV3-100
PBV3-114
PBV3-112
PBV3-200
A
2.87
3.15
3.42
4.33
C
B
1.65
1.65
1.93
1.93
C
2.09
3.03
3.15
5.12
B
D
A
F E
G
H
I
L
20
www.valleyind.com
D
0.79
0.79
0.79
0.79
E
2.72
3.23
3.90
4.53
F (NPT)
1
1
2
2
G
0.91
0.98
1.10
1.18
H
1.83
2.11
2.46
2.87
I
2.05
2.17
2.50
2.97
L
3.88
4.27
4.96
5.85
Features
• Precision molded in glass reinforced polypropylene for strength
and chemical resistance
• Teflon® seats for smooth operation and proper sealing
characteristics
• EPDM o-rings to handle most fertilizers and many chemicals.
Viton® available on request
• Positive handle stops for turning off and on.
• Maximum operating pressure 240 PSI for sizes up to 2”, 150 PSI
for sizes over 2”
FLUID COMPONENTS
1-320-243-8030 FAX
TANK ACCESSORIES & PIPE
POLYPROPYLENE VALVES
POLYPROPYLENE VALVE
POLYPROPYLENE VALVE
Part#
PBV-38HB12
Part#
PBV-38HB
Size
1/2” Male NPT x 3/8” HB 150 PSI Max
Size
3/8” HB x 3/8” HB 150 PSI Max
BRACKETS & PIPES
POLYPROPYLENE PIPE
Schedule 80, Black. 20 Foot lengths standard
Part#
NPT
075-8-00P
3/4” no spacing
075-8-10P
3/4” with 10” spacing, 3/8” holes
075-8-20P
3/4” with 20” spacing, 3/8” holes
100-8-00P
1” no spacing
100-8-10P
1” with 10” spacing, 3/8” holes
100-8-20P
1” with 20” spacing, 3/8” holes
ANCHOR BRACKET
Tank tie down strap, anchor bracket 2”
Part#
Description
TD-200
2” Tie down
PIPE CLAMP
Use with Schedule 80 Polypropylene pipe.
Part#
Pipe ID
CPC-075
3/4”
CPC-100
1”
21
www.valleyind.com
FLUID COMPONENTS
1-800-864-1649 TOLL FREE
STANDARD TANK LIDS
STANDARD TANK LIDS
New
Standard Tank Lids
Part#
G-8146000
G-8146002
G-8148000
G-8148002
G-8152000
G-8152002
G-8154000
G-8154002
G-8158000
G-8158002
G-8160000
G-8160002
G-8140000
G-8140002
G-8142000
G-8178000
G-8178001
G-8169004
G-8170008
G-8147002
G-8153001
G-8159000
G-8159001
Description
8” closed lid
8” vented lid
8” lid ring
8” lid ring w/c gasket
12” closed lid
12” vented lid w/fill cap
12” lid ring
12” lid ring w/c gasket
16” closed lid
16” vented lid w/fill cap
16” lid ring
16” lid ring w/c gasket
6” closed fill cap
6” vented fill cap
6” ring for fill cap
6” closed female threaded lid
6” vented female threaded lid
12” hinged lid w/vent
16” hinged lid w/vent
8” strainer basket
12” strainer basket
16” strainer basket
16” strainer basket -de
BULK HEAD FITTINGS AND TANK LIDS
6” LID WITH VENT
Part#
BHF12
BHF34
BHF100
BHF114
BHF112
BHF200
BHF300
BHF400
NPT
”
”
1”
1 ”
1 ”
2”
3”
4”
22
www.valleyind.com
Opening
1 ”
1 ”
2 ”
2 ”
2 ”
3 ”
4 ”
5 ”
Gasket Only
BHF12/34GAS
BHF12/34GAS
BHF100GAS
BHF114/112GAS
BHF112/112GAS
BHF200GAS
BHF300GAS
BHF400GAS
Size
6” Breather
EPDM Gasket
Only
Lid & Gasket
Part#
Height Wk Width Width
TL-6B
2.17”
6.00”
6.77”
TL-6B-GAS
TL-6B-W/GAS
* Tank threads may vary, contact factory for details.
FLUID COMPONENTS
1-320-243-8030 FAX
SPOT SPRAYER ACCESSORIES
New
SPOT SPRAYER FRAMES
LAWN TRAILER FRAME
Part#
SSFK-1525
Description
Lawn Trailer Frame For 15/25 Gal Spot Sprayers
ATV BOOM MOUNTING KIT
Part#
SSFK-ATV
Description
ATV Boom Mounting kit For 15/25 Gal Spot
Sprayers
New
BOOM KITS
BOOM KITS
Part#
SSBK-7
SSBK-10FB
SSBK-NB-2
SSBK-DNB-2
SSBK-DNB-3
SSBK-14FB
Description
2 Nozzle, 7Ft Spray Pattern
3 Nozzle, 10Ft Spray Pattern
Single Nozzle No-Boom, 16 Ft Spray, 2 GPM
Dual Nozzle No-Boom, 16 Ft Spray, 2 GPM
Dual Nozzle No-Boom, 22 Ft Spray, 3 GPM Req.
4 Nozzle, 14ft Spray Pattern, 3 GPM Required
SSBK-DNB-2
SSBK-7
SSBK-14FB
23
www.valleyind.com
FLUID COMPONENTS
1-800-864-1649 TOLL FREE
CLAMPS
T-BOLT CLAMPS
PURPOSE
To provide a quick, yet effective means of clamping a variety
of fittings to a wide range of hose. T-Bolts can be applied with
a standard socket wrench. They provide 360° sealing surface
by using a shoe or formed bridge.
SERVICES
The T-Bolt clamp is a high strength, reliable clamp with
numerous applications in both the commercial and industrial
markets including hose and duct work connections for air, oil,
water and other types of low pressure fluid lines.
PART NUMBERS
Part#
TB-840131
TB-840150
TB-840175
TB-840200
TB-840225
TB-840238
TB-840250
TB-840256
TB-840275
TB-840300
TB-840325
TB-840350
TB-840375
TB-840425
TB-840450
TB-840475
Size
Nominal
1-1/4”
1-1/2”
1-3/4”
2”
2-1/4”
2-3/8”
2-1/2”
2-9/16”
2-3/4”
3”
3-1/4”
3-1/2”
3-3/4”
4-1/4”
4-1/2”
4-3/4”
O.D. Range
From
1-5/32”
1-3/8”
1-5/8”
1-7/8”
2-1/8”
2-1/4”
2-3/8”
2-11/32”
2-17/32”
2-25/32”
3-1/32”
3-9/32”
3-17/32”
4-1/32”
4-9/32”
4-17/32”
To
1-15/32”
1-9/16”
1-13/16”
2-1/16”
2-5/16”
2-7/16”
2-9/16”
2-5/8”
2-13/16”
3-1/16”
3-5/16”
3-9/16”
3-16/16”
4-5/16”
4-9/16”
4-13/16”
FEATURES
• 0.025” band thickness
• ” wide band
• 300 series stainless steel band, bolt and nut material
• Self locking nuts
• 75 in/lb torque rating
24
www.valleyind.com
FLUID COMPONENTS
1-320-243-8030 FAX
CLAMPS
HOSE CLAMPS
HOSE CLAMPS
All 300-Series Stainless Steel, including strap, housing and screw.
PART NUMBERS
Part#
5/16” Band
350-004
350-005
350-006
350-008
350-010
350-012
350-016
350-020
” Band
620-006
620-008
620-010
620-012
620-016
620-020
620-024
Size
”
”
”
”
”
”
1”
1 ”
”
”
”
”
1”
1 ”
1 ”
Part#
Size
” Band (continued)
620-028
1 ”
620-032
2”
620-036
2 ”
620-040
2 ”
620-044
2 ”
620-048
3”
620-052
3 ”
620-056
3 ”
620-060
3 ”
620-064
4”
620-072
4 ”
620-080
5”
620-088
5 ”
620-096
6”
620-104
6 ”
HOSE & MOUNTING CLAMPS
SNAPPER HOSE CLAMPS, DOUBLE TOOTH
Part#
SHC-A
SHC-AA
SHC-BB
SHC-C
SHC-D
SHC-E
SHC-F
SHC-G
SHC-H
SHC-J
SHC-L
SHC-M
SHC-N
SHC-R
SHC-V
Min Diameter
0.228”
0.256”
0.351”
0.402”
0.449”
0.516”
0.616”
0.666”
0.702”
0.779”
0.985”
1.044”
1.123”
1.338”
1.730”
Max Diameter
0.356”
0.319”
0.394”
0.485”
0.511”
0.619”
0.707”
0.784”
0.801”
0.899”
1.135”
1.198”
1.296”
1.566”
2.010”
NOZZLE BODY BOOM CLAMPS
Part#
BCR-34
BCR-100
BCS-100
New
Tube Diameter
” Round
1” Round
1” Square
Mounting clamps in other sizes
available soon. Call for details.
Other sizes
available on
request
25
www.valleyind.com
FLUID COMPONENTS
1-800-864-1649 TOLL FREE
SEALANT & GARDEN HOSE VALVES
SEALANTS
PIPE SEALANT
Part#
25790
25631
25551
25431
28651
28541
TEFLON TAPE
Size
#5 Rectorseal, 1.75 oz. tube
#5 Rectorseal, pint can
pint can
#5 Rectorseal,
#5 Rectorseal, 1 pint can
# 21 black jack, pint can
# 21 black jack, 1 pint can
Part#
12-260
12-520
Width/Length
” by 260”
” by 520”
#/box
100
100
GARDEN HOSE VALVES
NYLON SHUT-OFF VALVES
Size
FGHT (inlet) x
FGHT (inlet) x
MGHT (2 outlets)
MGHT (1 outlet)
Part#
GHV-2-BLK
GHV-1-BLK
FEATURES
• 60 PSI maximum operating pressure
• Black nylon construction
GHV-2-BLK
GHV-1-BLK
WASHERS
WASHERS (OD x ID)
OD x ID
1x
1x
10373
W406V
26
www.valleyind.com
Bag Qty.
100
100
Description
Black vinyl washer
Black vinyl washer
with 50/60 mesh
screen
Part#
W406V
10373
FLUID COMPONENTS
1-320-243-8030 FAX
STRAINERS
BASKET STRAINERS
New
BASKET STRAINERS
Part#
TLS-5D
TLS-5D-CSK
Description
5” Diameter Basket Strainer (Fits 6” lid)
5” Diameter Basket Strainer (Fits 6” lid)
Clamshelled
New
SNAPPER HOSE CLAMPS, CLAMSHELLED
SNAPPER HOSE CLAMPS, 6 PACKS
Part#
SHC-F-CSK
SHC-J-CSK
SHC-M-CSK
Min Diameter
0.616”
0.779”
1.044”
Max Diameter
0.707”
0.899”
1.198”
Fits
3/8” Hose
1/2” Hose
3/4” Hose
27
www.valleyind.com
FLUID COMPONENTS
1-800-864-1649 TOLL FREE
WIRE HARNESS
WIRE HARNESS
New
WIRE HARNESS WITH CLAMPS
Part#
33-103233-CSK
Description
10 ft long wire w/ 2 pin connector
Clamshelled, 16 Gauge Wire
EXTENDED LENGTH TO REACH NEW TRACTOR
MODELS!
WIRE HARNESS WITH DC PLUG
Part#
33-103260-CSK
28
www.valleyind.com
Description
10 ft Long wire, fused, 2 pin,
max 7 amps, Clamshelled, 16 Gauge
FLUID COMPONENTS
1-320-243-8030 FAX
FM SERIES FLOW METERS
PANEL MOUNT FLOW METERS
FM Series panel mount flowmeters are
rotameters made of high quality transparent
acrylic (polymethyl methacrylate).
They are mainly used in chemical industries,
petroleum, light industry, medicine, fertilizer,
food, papermaking and scientific research etc.
to measure the single-phase, non pulse flow of
liquid and gas. These panel mounted flowmeters
feature high transparency, distinct reading, light
weight, durable perfor-mance, long life and
convenient installation.
PART NUMBERS
Part #
FM-0020
FM-0050
FM-2010
FM-2020
Flow Range
0 - 2 GPM
0 - 7 LPM
0 - 5 GPM
0 - 10 LPM
2 - 10 GPM
5 - 35 LPM
2 - 20 GPM
4 - 70 LPM
Length
6.5”
Connections
1/4” FNPT
6.5”
1/2” FNPT
9”
1” FNPT
9”
1” FNPT
FEATURES
• Clear Acrylic Body
• 316 Stainless Steel Float & Spindle
FM-0020 & FM-0050
SPECIFICATIONS
Accuracy
Repeatability
Maximum Pressure
Maximum Temperature
Body Material
Float Material
Guide Rod Material
Fastening Screw Material
Upper/Lower Adapter Bearing
O-Ring Material
_ 4% FS
+
_ 0.25% FS
+
1MPa / 150 psig
80°C / 176°F
Acrylic (polymethyl methacrylate)
316L (stainless steel)
316L (stainless steel)
Copper
F46
Silastic
FM-2010 & FM-2020
29
www.valleyind.com
FLUID COMPONENTS
1-800-864-1649 TOLL FREE
LINE STRAINERS
NYLON LOW-PROFILE STRAINERS
LOW PROFILE NYLON MPT LINE STRAINERS
Nylon Bowl
Part#
Size
14644
”
11474
”
12992
”
17933
”
”
11215
11043
”
17934
”
12546
”
12815
”
”
11109
12171
”
”
10923
Gasket
EPDM
EPDM
EPDM
Viton
Viton
Viton
EPDM
EPDM
EPDM
Viton
Viton
Viton
Mesh
20
40
80
20
40
80
20
40
80
20
40
80
A
B
D
Clear Bowl
Part#
Size
14656
”
11633
”
11469
”
10910
”
”
10911
10912
”
12379
”
11434
”
13090
”
”
10924
10925
”
”
10981
Gasket
EPDM
EPDM
EPDM
Viton
Viton
Viton
EPDM
EPDM
EPDM
Viton
Viton
Viton
Dimensions
A
B
C
D
Filter Area
3.06”
2.42”
1.86”
1.98”
4.27 sq”
Mesh
20
40
80
20
40
80
20
40
80
20
40
80
C
POLYPROPYLENE LOW-PROFILE STRAINERS
LOW PROFILE POLYPROPYLENE MPT LINE STRAINERS
Polypropylene Bowl
Part#
Size
Gasket
”
EPDM
17912
11642
”
EPDM
14591
”
EPDM
17913
”
Viton
13914
”
Viton
13915
”
Viton
”
EPDM
17917
17918
”
EPDM
17919
”
EPDM
17920
”
Viton
17921
”
Viton
17922
”
Viton
Mesh
20
40
80
20
40
80
20
40
80
20
40
80
A
B
D
C
30
www.valleyind.com
Clear Bowl
Part#
Size
”
14628
14629
”
14630
”
17916
”
12326
”
12678
”
”
14637
12250
”
12397
”
18456
”
17923
”
12410
”
Gasket
EPDM
EPDM
EPDM
Viton
Viton
Viton
EPDM
EPDM
EPDM
Viton
Viton
Viton
Dimensions
A
B
C
D
Filter Area
3.06”
2.42”
1.86”
1.98”
4.27 sq”
Mesh
20
40
80
20
40
80
20
40
80
20
40
80
FLUID COMPONENTS
1-320-243-8030 FAX
LINE STRAINERS
STANDARD LINE STRAINERS
STANDARD NYLON FPT LINE STRAINERS
Nylon Bowl
Part#
Size
11407
”
11297
”
11298
”
11300
”
10962
”
Gasket
EPDM
EPDM
EPDM
EPDM
Viton
Mesh
40
20
40
80
80
Clear Bowl
Part#
Size
17935
”
17936
”
12553
”
10949
”
”
10946
12460
”
11299
”
11301
”
10985
”
”
10986
Gasket
EPDM
EPDM
EPDM
Viton
Viton
EPDM
EPDM
EPDM
Viton
Viton
Mesh
20
40
80
40
80
20
40
80
40
80
A
B
D
Dimensions
Size A
”
3.64”
”
3.64”
B
5.35”
5.35”
C
2.95”
2.95”
D
4.80”
4.80”
F.Area
19 sq”
19 sq”
C
STANDARD POLYPROPYLENE FPT LINE STRAINERS
Polypropylene Bowl
Part#
Size
Gasket
14577
”
EPDM
11354
”
EPDM
11385
”
EPDM
”
Viton
12375
”
Viton
17924
11262
”
EPDM
11263
”
EPDM
11264
”
EPDM
12573
”
Viton
”
Viton
11376
11277
”
Viton
Mesh
20
40
80
40
80
20
40
80
20
40
80
Clear Bowl
Part#
Size
14687
”
12356
”
14688
”
”
17925
”
17926
13752
”
14689
”
12262
”
14466
”
”
17927
17928
”
14323
”
Gasket
EPDM
EPDM
EPDM
Viton
Viton
Viton
EPDM
EPDM
EPDM
Viton
Viton
Viton
Mesh
20
40
80
20
40
80
20
40
80
20
40
80
31
www.valleyind.com
FLUID COMPONENTS
1-800-864-1649 TOLL FREE
LINE STRAINERS
LARGE LINE STRAINERS
LARGE NYLON FPT LINE STRAINERS
Nylon Bowl
Part#
Size
11303 1”
11304 1”
11305 1”
10999 1”
11001 1”
11002 1”
17938 1 ”
11308 1 ”
11309 1 ”
11021 1 ”
11023 1 ”
11019 1 ”
17939 1 ”
11606 1 ”
11528 1 ”
11432 1 ”
11360 1 ”
11518 1 ”
Gasket
EPDM
EPDM
EPDM
Viton
Viton
Viton
EPDM
EPDM
EPDM
Viton
Viton
Viton
EPDM
EPDM
EPDM
Viton
Viton
Viton
Mesh
20
40
80
20
40
80
20
40
80
20
40
80
20
40
80
20
40
80
Clear Bowl
Part#
Size
14674 1”
12165 1”
12324 1”
11005 1”
11007 1”
11003 1”
13716 1 ”
12166 1 ”
12430 1 ”
11026 1 ”
11028 1 ”
11024 1 ”
11538 1 ”
12138 1 ”
12325 1 ”
11145 1 ”
11054 1 ”
11186 1 ”
Gasket
EPDM
EPDM
EPDM
Viton
Viton
Viton
EPDM
EPDM
EPDM
Viton
Viton
Viton
EPDM
EPDM
EPDM
Viton
Viton
Viton
Mesh
20
40
80
20
40
80
20
40
80
20
40
80
20
40
80
20
40
80
A
B
D
Dimensions
Size A
1”
4.62”
5.00”
1 ”
5.16”
1 ”
B
6.36”
7.10”
8.10”
C
4.00”
4.00”
4.00”
D
5.60”
6.10”
6.93”
F.Area
33 sq”
36 sq”
39 sq”
C
LARGE POLYPROPYLENE FPT LINE STRAINERS
Polypropylene Bowl
Part#
Size
Gasket
11265 1”
EPDM
11266 1”
EPDM
11267 1”
EPDM
12338 1”
Viton
11378 1”
Viton
12336 1”
Viton
EPDM
11268 1 ”
11269 1 ”
EPDM
11270 1 ”
EPDM
Viton
17637 1 ”
11379 1 ”
Viton
12337 1 ”
Viton
11271 1 ”
EPDM
11272 1 ”
EPDM
11273 1 ”
EPDM
12572 1 ”
Viton
Viton
11380 1 ”
11381 1 ”
Viton
32
www.valleyind.com
Mesh
20
40
80
20
40
80
20
40
80
20
40
80
20
40
80
20
40
80
Clear Bowl
Part#
Size
12943 1”
12488 1”
12465 1”
17929 1”
17930 1”
14915 1”
13740 1 ”
12415 1 ”
12389 1 ”
17741 1 ”
17931 1 ”
14916 1 ”
13850 1 ”
14460 1 ”
14464 1 ”
17932 1 ”
13539 1 ”
13751 1 ”
Gasket
EPDM
EPDM
EPDM
Viton
Viton
Viton
EPDM
EPDM
EPDM
Viton
Viton
Viton
EPDM
EPDM
EPDM
Viton
Viton
Viton
Mesh
20
40
80
20
40
80
20
40
80
20
40
80
20
40
80
20
40
80
FLUID COMPONENTS
1-320-243-8030 FAX
STRAINERS & PRESSURE RELIEF VALVES
Y-STRAINER, 316 STAINLESS STEEL
CLASS 800 Y-STRAINER
FPT
1
1
Part#
316-YS38
316-YS12
316-YS34
316-YS100
316-YS112
L
2.559
2.559
3.150
3.453
4.724
A
0.748
0.748
0.905
1.063
1.614
H
1.811
1.811
2.283
2.717
3.346
Features
• Investment Cast Body
• 800 PSI maximum pressure
• 230° F maximum working temperature
PRESSURE RELIEF VALVES
PRESSURE RELIEF VALVES
Part#
RV34-300B
Description
300 PSI Brass
Features
• 300 PSI max. operating pressure
• ” MPT inlet
• ” FPT discharge
• Solid brass construction
PRESSURE RELIEF VALVES
Part#
RV2064-06-58
RV2066-01-58
RV2066-06-58
PSI
400
150
400
Inlet Port (MPT)
1/2”
3/4”
3/4”
Features
• 400 PSI max. operating pressure
• ” FPT discharge
• Polypropylene & Brass Construction
33
www.valleyind.com
FLUID COMPONENTS
1-800-864-1649 TOLL FREE
GAUGES
DRY PRESSURE GAUGE
ASK ABOUT OUR NEW
GAUGE DISPLAY!
MODEL 24 GAUGES, SINGLE SCALE
Part #
1124DAB60
1124DAB100
1124DAB160
1124DAB200
2124DAB60
Size
2”
2”
2”
2”
2½”
PSI
60
100
160
200
60
Part #
2124DAB100
2124DAB160
4124DSB60
4124DSB100
Size
2½”
2½”
4”
4”
PSI
100
160
60
100
Size
4”
4”
4”
PSI
60
160
400
• Bottom mount, 1/4” MNPT fitting
• ABS casing, brass bourdon tube, and connection
• 2, 2 ½, or 4” face
MODEL 80 GAUGES, SINGLE SCALE
Part #
2180DSX60
2180DSX160
2180DSX400
CONTACT VALLEY
INDUSTRIES FOR
MORE INFO ON A
COMPLETE LINE OF
GAUGES.
Size
2½”
2½”
2½”
PSI
60
160
400
Part #
4180DSX60
4180DSX160
4180DSX400
• Bottom mount, 1/4” MNPT fitting
• Enameled steel casing, stainless steel bourdon tube, and
connection
• 2 ½, or 4” face
GLYCERIN PRESSURE GAUGE
MODEL 41 GAUGES, SINGLE SCALE
Part #
2141GXB60
2141GXB100
2141GXB160
Size
2½”
2½”
2½”
PSI
60
100
160
Part #
2141GXB200
2141GXB300
2141GXB5000
Size
2½”
2½”
2½”
PSI
200
300
5000
• Bottom mount, 1/4” MNPT fitting
• 304 stainless steel casing, brass bourdon tube, and connection
• 2½” face
MODEL 54 GAUGES, STAINLESS STEEL
CONTACT VALLEY
INDUSTRIES FOR
MORE INFO ON A
COMPLETE LINE OF
GAUGES.
34
www.valleyind.com
Part #
2154GXX60
Size
2½”
PSI
60
Part #
2154GXX100
Size
2½”
• Bottom mount, 1/4” MNPT fitting
• Stainless steel casing, bourdon tube, and connection
• 2½” face
PSI
100
FLUID COMPONENTS
1-320-243-8030 FAX
New
Flat Fan Spray tip
Conical Spray Tip
PART NUMBER
Part#
BPS-405
BACKPACK SPRAYER
Description
4 Gallon Capacity, 15-90 PSI
Repair Kit BPS-400K
Features
• Two standard spray tips and two bonus spray tips.
Choose between the flat fan a conical spray tip or the
BONUS 4-hole adjustable spray tip or dual conical tip,
• Ergonomically designed tank.
• Wide-mouthed tank lid opening for less spillage.
• Easily convert from left hand to right hand operation.
• Lever action piston pump.
• Built-in carry handle lid for easy transport.
• Lance clips to side of tank for convenient storage.
• Built-in strainers and screen to help prevent clogging.
• Quick fitting shoulder harness.
• Quality Viton seals.
• Complete spare parts kit.
Dual Conical Spray Tip
4-Hole Adj. Spray Tip
Comes with complete spare
parts and quality Viton seals.
35
www.valleyind.com
FLUID COMPONENTS
1-800-864-1649 TOLL FREE
BACKPACK & HANDHELD SPRAYERS
SPOT SPRAY GUNS
SPOT SPRAY GUN
Part#
SG-4200-18
Description
Spray gun with #18 orifice
GC-100
Features
• •30”
length
60”overall
Maximum
extended length
• •Chromed
aluminum
Chromed aluminumspray
spraylance
lance
” hose
connection
• • Filter
in barb
Handle
• •Filter
handle
3/8” in
Hose
barb connection
• •Contact
us about nozzle and connection options
#18 orifice
SG-42ASSY-18
Options
• GC-100 optional spray gun mounting clip
• GC-100-kit , includes 2 clips,10-24 x ½” machine screws
• SG-42ASSY-18, replacement spray tip
SPOT SPRAY GUN
Part#
SG-4507F
Description
Spray gun with #18 orifice
GC-100
Features
• 30” overall length
• Chromed aluminum spray lance
• ” hose barb connection
• Filter in handle
• Contact us about nozzle and connection options
SG-45ASSY-18
Options
• GC-100 optional spray gun mounting clip
• GC-100-kit , includes 2 clips,10-24 x ½” machine screws
• SG-45ASSY-18, replacement spray tip
TELESCOPING SPRAY GUN
Part#
SG-500T
Description
Spray gun, telescoping
FEATURES
• 40” Maximum extended length
• Chromed aluminum spray lance
• Filter in Handle
• 3/8” Hose barb connection
• #18 orifice
36
www.valleyind.com
GC-100
SG-45ASSY-18
Options
• GC-100 optional spray gun mounting clip
• GC-100-kit , includes 2 clips,10-24 x ½” machine screws
• SG-45ASSY-18, replacement spray tip
FLUID COMPONENTS
1-320-243-8030 FAX
SPRAY GUNS
PISTOL SPRAY GUNS
PART NUMBERS
Part#
SG-5518-09
SG-5518-18
SG-5518-24
Description
9” pistol spray gun, #18 tip
18” pistol spray gun, #18 tip
24” pistol spray gun, #18 Tip
Features
• Brass valve
• 350 PSI Max Pressure
• ” Hose Barb Connection • 7 GPM Max Flow
• Adjustable spray nozzle
PISTOL SPRAY GUN
PISTOL GRIP SPRAY GUN
Part#
SG-2218-18
Description
18” pistol spray gun with #18 tip
Repair Kit SG-2200KIT
Features
• Brass valve
• ” Hose Barb Connection
• Adjustable spray nozzle
• Ergonomic fit
• Locking spray grip
• Field repairable
• 250 PSI Max Pressure
• 7 GPM Max Flow
PISTOL SPRAY GUN
SPRAY GUN
Part#
SG-5524-00
Features
• Brass valve
• ” MNPT inlet
• Adjustable spray nozzle
Description
Spray Gun, #24 Tip
• Ergonomic fit
• Locking spray grip
37
www.valleyind.com
FLUID COMPONENTS
1-800-864-1649 TOLL FREE
SPRAY GUNS
ADJUSTABLE SPRAY GUN
PART NUMBER
Part#
SG-2200
FEATURES
Description
Adjustable Spray Gun
Repair Kit SG-2200KIT
New
Options
• SW-12BS Swivel, Brass 1/2” BSPT Male x Female
• One-hand spray pattern adjustment from cone mist to
long, straight streams.
• Excellent for vineyard, nursery and greenhouse
applications
• Includes 3/8” hose barb inlet
• 15 GPM Maximum / 5 GPM Minimum
• 700 PSI Maximum / 100 PSI Minimum
• 16” overall length
• 1.5 lbs.
• Call for spray tip sizing and availability
LONG RANGE SPRAY GUN
PART NUMBER
Part#
SG-3200
FEATURES
Description
Long Range Spray Gun,
400 PSI Max Pressure,
3 GPM Max Flow
New
Options
• SW-12BS Swivel, Brass 1/2” BSPT Male x Female
38
www.valleyind.com
• Continuous spray pattern adjustment from cone mist to
long, straight streams.
• Ergonomic handle with hand guard and trigger lock
• Includes 1/2” hose barb inlet
• 25 GPM Maximum / 5 GPM Minimum
• 850 PSI / 100 PSI Minimum
• 26 ” overall length
• 3.5 lbs.
• Call for spray tip sizing and availability
1-320-243-8030 FAX
FLUID COMPONENTS
TIRE & WHEEL ASSEMBLIES
HEAVY DUTY TIRE ASSEMBLY
TIRE ASSEMBLIES
New
15” TIRE ASSEMBLY
SPECIFICATIONS
Part #
Description
TWA-18X7-8/4HOLE
18” Tire and Wheel Assembly
SPECIFICATIONS
Part #
Description
TWA15x600-6
15” Tire & Wheel Assembly
FEATURES
• 4-ply Tires
• 4 Hole Bolt Pattern with 4” Spacing
• 9” Rim
• 7” Tread Width
• Max Load 785 lbs. at 26 PSI
FEATURES
• 2-ply Tires With ‘Turf Tread’
• 3/4” ID Steel Ball Bearing
• 6” Rim
• 4-1/2” Tread Width
• 3-1/8” Hub Width
10 & 13” TIRE ASSEMBLIES
New
New
OPTIONS
Part #
33-103150
33-103243
Description
4” Hub PCD x 4 Stud with dust cap and
Bearing
Spindle, 1 1/4” x 8.25 Hub
SPECIFICATIONS
Part #
Description
Size
Tread
Bearing ID
Ball Bearing
Rim Size
Tread Width
Hub Width
TWA410/350-4
10” Tire & Wheel
410/350-4
2-ply ‘Turf Tread’
5/8” ID
Steel
4” Diameter
2-5/8”
2-1/4”
TWA13X5-6
13” Tire & Wheel
13.0 X 5.00 -6.00
2-ply ‘Turf Tread’
3/4” ID
Steel
6 3/8” Diameter
4”
2-1/4”
39
www.valleyind.com
FLUID COMPONENTS
COMET DIAPHRAGM PUMPS
SERIES
1-800-864-1649 TOLL FREE
New
DESCRIPTION
Low pressure pumps with plastic (BP75) or plastic coated aluminum heads,
BP Series
glass filled nylon manifolds and stainless steel wet parts for excellent corrosion
resistance. Great for low pressure agricultural spraying, as well as high volume
hydrostatic testing.
Low to medium pressure diaphragm pumps with plastic (MC8/18) or anodized
MC Series
aluminum (MC25) bodies. Great for agricultural spraying, as well as gardening, pest
control, lawn care, mold removal and insulation.
Medium pressure internal manifold pumps with anodized aluminum heads for less
MP Series
leak points. Great for lawn care, pest control, agriculture, insulation and heavy duty
industrial applications.
Plastic (P36) or plastic coated aluminum (P48) heads with plastic manifolds for
P Series
premium corrosion resistance. Great for mild acids and mold removal agents, as
well as agriculture, lawn care and pest control.
High pressure internal manifold pumps with anodized aluminum heads for less
APS Series
leak points. Great for lawn care, pest control, hydrostatic testing and agricultural
spraying.
High pressure pumps with brass heads and bronze external manifolds for excellent
IDS Series
corrosion resistance in high pressure applications such as orchard, vegetable and
vineyard spraying, de-icing and circuit board washing.
• Call for pricing and availability
SMART START™
New
FEATURES
• Oil Monitoring drain plug, which shuts off a gas engine or
trips an alarm upon diaphragm failure.
• Designed for use with Honda GX engines.
• Available for select models
40
www.valleyind.com
VISIT WWW.COMETPUMPUSA.COM FOR MORE INFORMATION
FLUID COMPONENTS
1-320-243-8030 FAX
New
GAS ENGINE PUMPING UNITS
FEATURES
• Complete pumping units with the diaphragm pump and
pressure regulator of your choice mounted to gas engine.
• Several models are compatible with out Smart Start™
Sensor
• Call for availability
New
ELECTRIC PUMPING UNITS
FEATURES
• Featuring heavy duty 12 and 115 volt electric motors for
heavy duty industrial applications where extra durability is
needed
• Shaft cover or protector is recommended with all male
shaft applications
• Call for availability
New
CONTROL UNITS AND COMPONENTS
FEATURES
• Control units specifically designed for direct or remote
mount to Comet diaphragm pumps.
• Assortment of compatible pulleys, shaft kits, adapters, and
shaft covers available.
• Call for availability
VISIT WWW.COMETPUMPUSA.COM FOR MORE INFORMATION
41
www.valleyind.com
FLUID COMPONENTS
1-800-864-1649 TOLL FREE
HOSE REELS
75 FOOT HOSE REEL
PART NUMBERS
Size
75 ft. capacity hose reel
Part#
HR-75
FEATURES
• 75 ft. capacity ” ID spray hose
• Powder coated steel frame
• Swivel included
• 3000 PSI Max.
• 160° F Max temperature
100 FOOT HOSE REEL
PART NUMBERS
Size
100 ft. capacity hose reel
200 ft. capacity hose reel
Part#
HR-100
HR-200
FEATURES
• 3/8” ID Spray Hose
• Powder coated steel frame
• Swivel included
• 3000 PSI Max.
• 160° F Max temperature
200 & 400 FOOT HOSE REELS
PART NUMBERS
Size
200 ft. capacity hose reel
400 ft. capacity hose reel,
with garden hose fittings
FEATURES
• 200/400 ft. capacity ” ID spray hose
• Powder coated steel frame
• 8 GPM swivel included
• 3000 PSI Max.
• Easy assembly
42
www.valleyind.com
Part#
HRG-200FT
HRG-400FT-FIT
1-320-243-8030 FAX
FLUID COMPONENTS
ACCESSORY DISPLAY PROGRAMS
Enhance Your
Point Of Sale
With Valley’s
Display
& Packaging
Solutions!
COMPLETE JACK DISPLAY
COMPLETE DISPLAY FOR
AGRICULTURAL COMPONENTS
GAUGE DISPLAY
PRESSURE WASHER
ACCESSORY DISPLAYS
43
www.valleyind.com