Superior
Products, LLC
CATALOG #18
Brass & Stainless Steel
Gas Fittings & Assemblies
gid Pigtails
Pigtails
Flexible & Rigid
Manifolds & Gas Management Systems
Industrial
Hospital
Specialty
www.superiorprod.com
Engineering
table of contents
general information/ordering information .......................................................................................................1-5
table of contents ............................................................................................................................................... 3
,QGXVWULDOJDV¿WWLQJV ................................................................................................................................6-54
Brass Fittings/Regulator Outlets
Cylinder Connections
Pigtails ......................................................................................................................................................56-63
Pigtails
Hose Assemblies
0DQLIROGV¿OOSODQW .................................................................................................................................64-72
Manifolds
Changeover Systems
DLUZDWHU¿WWLQJV .................................18, 19
manifold assemblies ............................................. 69-70
brass ‘y’ connectors .................................46
modular headers........................................................ 68
brass hose ferrules, braces... ..................15
outlet adaptors ...................................................... 49-51
EUDVVKRVH¿WWLQJV.................................. 6-9
pigtail assemblies ................................................. 56-63
EULWLVKVW\OH¿WWLQJV ..............................20,21
SLJWDLOFRQ¿JXUDWRU ................................................ 62-63
cga - regulator inlet nuts & nipples .... 24-42
pin indexed yokes ...................................................... 43
check valves ............................................10
SLSH¿WWLQJV .......................................................... 13, 14
coupler tees & manifold blocks ..........44, 45
power cable nipples & connector assemblies.............17
cradle pack manifolds ........................ 66-67
regulator outlets ........................................................... 9
FU\RJHQLFKRVH¿WWLQJV..........................55
shut-off valves & dust caps.................................. 47, 48
cylinders to regulator adaptors .......... 52-54
yokes ................................................................... 43, 81
ÀDVKDUUHVWRUVTXLFNFRQQHFWRUV ..........11
JHUPDQVW\OH¿WWLQJV........................... 21-22
hose repair kits ........................................16
manifold accessories ......................... 70-72
PROUD MEMBER
2
OF
:
www.superiorprod.com
table of contents
Adaptor
Argon & Inert Arc ...................................... 18
Cryogenic Flare .......................................... 55
Cylinder to Regulator, CGA ...................52-54
Hose, Oxygen / Fuel Gas –
A, B, C & D size .........................................7-9
Liquid CGA-622 x 20 .................................. 40
Manifold Pipeline Outlet, CGA ...............49-51
Pipe Thread ..........................................7-9,14
Braces
Hose ........................................................... 15
British Fittings..................................20-21
Bushings
Manifold Union Bushings ............................ 71
Outlet, Regulator - A, B, C & D size.............. 9
3LSHWKUHDG¿WWLQJV ......... 14
Cable Connectors
Nipples........................................................ 17
Caps
Dust Cap & Chain - CGA & Hose ............... 47
Check Valves
Inline ........................................................... 10
Nipple Type............................................24-42
Tee, CGA ...............................................44-45
Torch, Regulator ......................................... 10
Couplers
Hose - A,B,C,D size ...................................... 9
Hose - Argon & Inert Arc ........................18-19
Tees for Manifold, CGA..........................44-45
Cradle Pack Manifolds
CPR, Long Style.................................. ....... 67
SCMB, Short Style...................................... 64
Cryogenic
Fittings ........................................................ 55
Hose ........................................................... 55
DIN Fittings (German)
Nuts & Nipples............................... ........21-22
Ferrules
Hose ........................................................... 15
Fill Plant
Yokes .......................................................... 43
Filters
Regulator Inlet Nipple ................................. 23
Flash Arrestor, Dry .............................. 64
Call
Pigtail Assemblies
Flash Arrestors
Pigtail ............................................................. 60 Armor Guard ................................................... 60
Torch, Regulator ............................................. 11 Brass, Copper........................................... 56, 58
Flexible, Nylon ........................................... 57-58
Hose Repair Kits ...................................... 16 Flexible, Stainless Braided .................. 57-60, 62
Liquid Cylinder Gas Use ................................. 58
NFPA Hospital ................................................ 58
Inert Arc Fittings
Adaptors ......................................................... 18 3LJWDLO&RQ¿JXUDWRU .............................. 59, 62-63
Couplers .................................................... 18-19 Pigtail Ends................................................ 61-63
Nipples............................................................ 19 Rigid, Stainless Steel...................................... 56
Nuts ........................................................... 18-19 Spring Guard .................................................. 60
Power Cable ................................................... 17
Pipe Thread Fittings
Leak Detector............................................. 15 Brass & Stainless Steel ............................. 13-14
Plugs
Manifolds
Semi-Automatic Changeover.......................... 64 Manifold, Union .............................................. 71
Blocks ............................................................. 45 Pipe Thread ................................................... 14
Fittings ....................................................... 70-71 Plugs, CGA .................................................... 48
Headers, Cradle Pack ............................... 66-67 Plug & Chain, CGA ......................................... 48
Headers, Extension ........................................ 69
Headers, Modular ........................................... 68 Quick Connectors
Manual ....................................................... 69-70 Regulator & Torch ............................................11
Mixers ............................................................. 65
Pipe Lengths................................................... 71 Repair Kits
Hose ............................................................... 16
Mixers............................................................ 65 Crimping Tools ................................................ 16
Splicers
Nipples
Handtight (HT) ........................................... 24-42 Hose ................................................................. 6
Hose, Inert Gas .............................................. 19
Hose, Oxygen/Fuel Gas A, B, C, D .................. 6 Station Drops & Valves.......................... 72
Regulator Inlet, CGA Brass, Stainless & Chrome........................ 24-42 Tees
RPV Style .................................................. 27-38 Manifold, CGA
- Brass, Stainless, Chrome.. ..................... 44-45
Union Nipples - Manifold ................................ 71
Manifold, Brass .............................................. 71 Manifold, Pipe ................................................. 71
Pipe Thread - Brass & Stainless..................... 13
Nuts
Handtight (HT) ........................................... 24-42 Tools
Hose-Argon & Inert Gas ............................ 18-19 Ferrule Crimping, Hand .................................. 16
Hose-Oxygen & Fuel Gas A, B, C & D size .............................................. 6 Tubing
Brass, Copper and Stainless .......................... 56
Regulator CGA
- Brass, Stainless, Chrome ....................... 24-42
Union Nut, Manifold ........................................ 71 Valves
Ball.................................................................. 72
Brass Seat, Shut-Off....................................... 47
Pigtail Assemblies
Armor Guard ................................................... 60 Header ............................................................ 72
Brass, Copper............................................ 56,58 Master Shut-Off .............................................. 72
Flexible, Nylon ........................................... 57-58 Station Drop.................................................... 72
Flexible, Stainless Braided .................. 57-60, 60 “Y” with Valves ................................................ 46
Liquid Cylinder Gas Use ................................. 58
NFPA Hospital ................................................ 58 “Y” Connectors......................................... 46
3LJWDLO&RQ¿JXUDWRU .............................. 59, 62-63
Pigtail Ends................................................ 60-63 Yokes ............................................................. 43
Rigid, Stainless Steel...................................... 56
Spring Guard .................................................. 60 Zero Clearance Fittings ......................... 64
for more information or to place an order ‡ZZZVXSHULRUSURGFRP
3
product description guide
Superior Products, LLC. has made every effort to publish the most helpful and
comprehensive catalog of compressed gas products available. With safety and accurate
SURGXFWVSHFL¿FDWLRQDVWRSSULRULWLHVRXUSURGXFWGHVFULSWLRQVLQFOXGHLQIRUPDWLRQRQ
sizes, operating pressures, application, construction materials, CGA numbers, and all
other relevant information.
CGA numbersLGHQWLI\SURGXFWVLQWHQGHGIRUVSHFL¿FJDVVHUYLFHV$OO6XSHULRU¿WWLQJV
are manufactured to Compressed Gas Association standards.
,Q DGGLWLRQ WR &*$ QXPEHUV PDQ\ SRSXODU ¿WWLQJV DUH FRPPRQO\ UHIHUUHG WR DV
“A”, “B”, “C”, and “D” VL]HG¿WWLQJV)RU\RXUFRQYHQLHQFHWKHVHOHWWHULGHQWL¿FDWLRQV
are also included in our product descriptions as “A”, “B”, “C”, and “D”. Pressure
ratingsRQ$%&DQG'VL]HG¿WWLQJVLQFOXGHGRQWKHVHSDJHVDUHOLPLWHGE\WKH&*$
to 200 PSI (1400 kPa) maximum working pressure. Kilopascals (kPa) are the metric
HTXLYDOHQWRI3RXQGV3HU6TXDUH,QFK36,
gas acronyms used
(not all standard)
CGA
NGO
NPT
UNS
PSI
EXT
INT
CS
RH
LH
WT
HT
QC
CP
ID
OD
Compressed Gas Association
National Gas Outlet
National Pipe Thread
8QL¿HG1XPEHULQJ6\VWHP
3RXQGVSHU6TXDUH,QFK
External
(M - Male Thread)
Internal
(F - Female Thread)
Countersunk
metric conversion
Right Handed
Left Handed
Wrench Tight
Hand Tight
Quick Connect
Chrome Plated
Inside Diameter
Outside Diameter
PSI to kPa to Bar
The following conversions are used throughout this catalog, rounded off for ease
of use. Kilopascals & Bar conversions are provided whenever possible.(1 PSI =
6.89 kPa = .07 Bar
200 PSI = 1379 kPa = 14 Bar
400 PSI = 2758 kPa = 28 Bar
500 PSI = 3400 kPa = 35 Bar
1000 PSI = 6895 kPa = 70 Bar
3000 PSI
4500 PSI
5500 PSI
6000 PSI
=
=
=
=
20685 kPa =
27580 kPa =
37920 kPa =
41370 kPa =
207 Bar
310 Bar
380 Bar
414 Bar
PD[LPXPJDVZLWKGUDZDOUDWHVIRUOLTXLÀHGJDVHV
CRYOGENIC CYLINDERS
CO2 - 110 SCFH
NITROUS OXIDE - 80
SCFH
ARGON, NITROGEN, OXYGEN - 75 SCFH
HIGH PRESSURE W/LIMITED WITHDRAWAL RATE
CO2 50 - SCFH
NITROUS OXIDE - 50
SCFH
SDUWW\SH
Adaptors - Outlet
Bushings - Pipe
Brass Tubing
Cable Connectors
Check Valves
Couplers - Tees
Copper Tubing
Crimping Tools
Dust Caps & Chain
Elbow
Cryogenic Elbow
Cryogenic Flexible Hose
Cryo Hand Tight with Elbow
Cryogenic Phase Separator
Check Valves
Filters
Flare Adaptors
Flash Back Arrestor
Gas Manifold Assemblies
Gas Manifold Fittings
Hand Tight Cyrogenic
Hand Tight Nuts
Hose Repair Kits
Manifold Blocks
Chrome Nuts
Chrome Nipples
Leak Detector
Nipples
Nuts
NPT Male
NPT Female
‘O’ Rings
Pigtails Rigid
Pigtails Flexible
Plastic Tips
Plugs & Chains
Power Cable Holders
Reverse Flow Check Valve
Splicers
Stainless Steel
Snap Rings
Valves
Washers
“Y” Connectors
“Y”’ Connectors with Valves
Acetylene - 1/10 CYL CAPACITY/HOUR
4
OHWWHUSUHÀ[
www.superiorprod.com
A
B
BT
CN
CV
C
CT
KT
CC
EL
CEL
CHF
CHTE
CPS
CV
F
FA
FA
GMA
GMF
HTC
HTN
RK
MB
MN
MNP
LD
NP
N
MNPT
FNPT
OR
PT
PTF
T
PC
PCH
RCV
S
SS
XSR
V
W
Y
YV
new products
NEW FROM SUPERIOR PRODUCTS FEATURED IN THIS CATALOG !
NEW PRODUCTS
PAGE #
Hose Repair Kits w/o Tools
16
Three Hole Vise Grip Tools
16
DIN Fittings
21, 22
Stainless Steel Check Valve Nipples
27-40
RPV Valve Nipples
27-39
CGA 622 & 624 Nut & Nipple
40
CGA 622 & 624 Valve Outlet Adaptors
51
CGA 320-580 One Piece Adaptor
52
CGA 622-320 Adaptor
40
3600 PSI Post Sintered PTFE Hose
61
1/4” FNPT Swivel end Pigtails
60
One Piece Modular Brass Headers
68
90o Manifold Header Union
71
CGA TABLE OF CONTENTS BY GAS & CGA #
CGA #
PAGE #
British
20, 21
DIN
21, 22
CGA 170 Small Bottle
24
CGA 180 Small Bottle
24
CGA 200 Acetylene “MC”
24
CGA 280 Med. Breathing Mix 25
CGA 296 Industrial O2 Mix
25
CGA 300
Acetylene
26
CGA 320 Carbon Dioxide
27
CGA 326
Nitrous Oxide
28
&*$/LTXL¿HG&RUURVLYHV29
CGA 346 Air (up to 3000psi) 29, 30
Call
CGA #
PAGE #
CGA 347 Air (3001- 5500 psi)
CGA 350
Hydrogen
CGA 410 Canadian Acetylene
CGA 415 Canadian Acetylene
CGA 500 Medical Mixtures
CGA 510 Propane/Acetylene
CGA 520
Acetylene
CGA 540
Oxygen
CGA 555 Propane/Butane
CGA 577 Oxygen (3001-4000 psi)
CGA 580
Inert Gases
&*$6XOIXU+H[DÀRXULGH
30
31
32
32
33
34
35
36
37
37
38
39
CGA #
PAGE #
CGA 621 Oil Tolerant Nitrogen
&*$&2/LT:LWKGUDZDO
&*$12/LT:LWKGUDZDO
CGA 660 Refrigerant Gases
CGA 677 Inerts (5501-7500 psi)
CGA 680 Inerts (3001-5500 psi)
CGA 695 Hydrogen/Methane
CGA 701 Oxygen (4001-5500 psi)
CGA 702 Air (5501-7500 psi)
for more information or to place an order ‡ZZZVXSHULRUSURGFRP
39
40
40
40
41
41
42
42
42
5
brass hose nuts, nipples & splicers
Hose Nuts
Oxygen
Thread Size
200 PSI
Hose Nuts
CGA
Part No.
Fuel Gas
020
022
028
024
026
N-10
N-20
N-30
N-34
N-42
“A” 3/8”-24-RH
“B” 9/16”-18-RH
Railroad 41/64”-18-RH
“C” 7/8”-14-RH
“D” 1-1/4”-12-RH
N-20
Barb Hose Nipples
200 PSI
Maximum Pressure 200 PSI
200 PSI
N-21
Thread Size
CGA
Part No.
“A” 3/8”-24-LH
“B” 9/16”-18-LH
Railroad 41/64”-18-LH
“C” 7/8”-14-LH
“D” 1-1/4”-12-LH
021
023
029
025
027
N-11
N-21
N-31
N-35
N-43
Spiral Hose Nipples
200 PSI
NP-10
Size/Length
NP-46
For Hose Size
“A”, 1-7/32”
“B”, 3-1/32”
“B”, 1-7/16”
“B”, 1-7/16”(with ‘O’Ring)
“B”, 1-7/16”
“B”, 1-7/16”(with ‘O’Ring)
“C”, 1-35/64”
“B”, 1-7/16”
“B”, 1-7/16”
“B”, 1-3/4”
“C”, 2”
“C”, 2-1/4”
“C”, 4-9/16”
“D”, 2-1/2”
“D”, 3-1/2”
‘O’Ring for NP-6W & NP-10W
3/16” I.D.
4-5/32” I.D.
3/16” I.D.
3/16” I.D.
1/4” I.D.
1/4” I.D.
1/4” I.D.
5/16” I.D.
3/8” I.D.
3/8” I.D.
3/8” I.D.
1/2” I.D.
1/2” I.D.
1/2” I.D.
3/4” I.D.
Part No.
Size/Length
For Hose Size
NP-4
NP-5
NP-6
NP-6W
NP-10
NP-10W
NP-12
NP-14
NP-18
NP-20
NP-24
NP-28
NP-30
NP-34
NP-36
XOR-002
“A”, 1-1/4”
“B”, 1-5/16”
“B”, 1-19/32”
“B”, 1-5/8”
3/16” I.D.
3/16” I.D.
1/4” I.D.
3/8” I.D.
Part No.
NP-40
NP-42
NP-46
NP-54
Nipples With Threads”B”, ”C” & ”D” Size
NP-605
Size/Length
Thread size
“B”, 1”
“B”, 1-1/2”
“C”, 2”
“C”, 2-1/2”
“D”, 2-1/2”
1/8” MNPT
1/8” MNPT
1/4” MNPT
1/4” MNPT
1/2” MNPT
Part No.
NP-595
NP-596
NP-605*
NP-606*
NP-640
7RRUGHUZLWK¿OWHUDGGVXI¿[³5)´
Hose Splicers
Barb Hexagon Center Stop
S-244
Barb Round Center Stop
S-344
6
200 PSI
200 PSI
For Hose Size
Part No.
For Hose Size
Part No.
Spiral Hexagon Center Stop
3/16” I.D.
1/4” I.D.
5/16” I.D.
3/8” I.D.
S-233
S-244
S-255
S-266
1/4” I.D.
S-544
3/16” I.D.
1/4” I.D.
3/8” I.D.
S-433
S-444
S-466
S-544
3/16” I.D.
1/4” I.D.
5/16”I.D.
3/8” I.D.
1/2” I.D.
S-333
S-344
S-355
S-366
S-388
Barb No Center Stop
S-444
www.superiorprod.com
EUDVVKRVHÀWWLQJV
Maximum Pressure 200 PSI
200 PSI
Brass Thread To Hose Barb Adaptor
Thread Size
Male NPT Thread
A-113
Female NPT Thread Thread
A-151
For Hose Size
Part No.
1/8” MNPT
1/8” MNPT
1/8” MNPT
1/8” MNPT
1/4” MNPT
1/4” MNPT
1/4” MNPT
1/4” MNPT
1/4” MNPT
3/8” MNPT
3/8” MNPT
3/8” MNPT
1/8” I.D.
3/16” I.D.
1/4” I.D.
3/8” I.D.
1/8” I.D.
3/16” I.D.
1/4” I.D.
5/16” I.D.
3/8” I.D.
1/4” I.D.
5/16” I.D.
3/8” I.D.
A-101
A-102
A-103
A-105
A-111
A-112
A-113
A-114
A-115
A-122
A-123
A-124
1/8” FNPT
1/8” FNPT
1/8” FNPT
1/4” FNPT
1/4” FNPT
1/4” FNPT
1/4” FNPT
1/4” FNPT
1/8” I.D.
3/16” I.D.
1/4” I.D.
1/8” I.D.
3/16” I.D.
1/4” I.D.
5/16” I.D.
3/8” I.D.
A-151
A-152
A-153
A-161
A-162
A-163
A-164
A-165
Hose Barb Adaptors
200 PSI
(Standard B Thread)
Thread Size
For Hose Size
Oxygen“B” 9/16”-18-RH-EXT
Fuel Gas“B” 9/16”-18-LH-EXT
Oxygen“B” 9/16”-18-RH-EXT
Fuel Gas “B” 9/16”-18-LH-EXT
A-51
3/16” I.D.
3/16” I.D.
1/4” I.D.
1/4” I.D.
Hose Adaptors
Part No.
A-50
A-51
A-60
A-61
200 PSI
Thread Size
For Hose Size
Part No.
1/4” I.D. Hose
1/4” I.D. Hose
1/4” I.D. Hose
1/4” I.D. Hose
A-250
A-251
A-254
A-255
Swivel Nut to Hose Barb Adaptors
A-254
Oxygen “A” 3/8”-24-RH-INT
Fuel Gas “A” 3/8”-24 LH-INT
Oxygen “B” 9/16”-18 -RH-INT
Fuel Gas “B” 9/16”-18 -LH-INT
Swivel Nut Adaptors
A-193
Call
200 PSI
Part No.
Thread Size
Hose Connection
1/4” MNPT
“B” 9/16”-18-RH-INT
A-192
1/4” MNPT
“B” 9/16”-18-LH-INT
A-193
A-192
for more information or to place an order ‡ZZZVXSHULRUSURGFRP
7
EUDVVKRVHÀWWLQJV
Maximum Pressure 200 PSI
External Hose Nut to Swivel Nut
and Nipple
200 PSI
Pipe Thread to Swivel Nut
and Nipple 2-1/2”
200 PSI
A-300
A-307
A-188
Oxygen
Oxygen
Thread Size
“A” 3/8”-24-RH-EXT
“B” 9/16”-18-RH-EXT
“B” 9/16”-18-RH-EXT
Thread Size
Part No.
“B” 9/16”-18-RH-INT
“A” 3/8”-24-RH-INT
“C” 7/8”-14-RH-INT
A-300
A-306
A-308
Fuel Gas
1/4” MNPT
Thread Size
“B” 9/16”-18-RH-INT
Part No.
A-188
Fuel Gas
Thread Size
“A” 3/8”-24-LH-EXT
“B” 9/16”-18-LH-EXT
Thread Size
Thread Size
Part No.
“B” 9/16”-18-LH-INT
“A” 3/8”-24-LH-INT
A-301
A-307
Female Pipe Thread
to “B” Connections
200 PSI
Thread Size
1/4” MNPT
Thread Size
“B” 9/16”-18-LH-INT
Part No.
A-189
Female NPT
to Internal Swivel Nut
200 PSI
EXT Hose
“B” Coupler
FNPT
INT Hose “B”
Swivel Nut
FNPT
Oxygen
Thread Size
1/8” FNPT
A-238
Thread Size
“B” 9/16”-18-RH-EXT
Part No.
A-238
Oxygen
Thread Size
1/4” FNPT
“B” 9/16”-18-RH-EXT
A-242
1/4” FNPT
A-228
Thread Size
“B” 9/16”-18-RH-INT
Part No.
A-228
Fuel Gas
Thread Size
1/4” FNPT
Thread Size
“B” 9/16”-18-LH-EXT
Part No.
A-243
Fuel Gas
Thread Size
1/4” FNPT
8
www.superiorprod.com
Thread Size
Part No.
“B” 9/16”-18-LH-INT
A-229
EUDVVVWDLQOHVVVWHHOKRVHÀWWLQJVUHJXODWRURXWOHWV
90° External Hose Coupler to
Internal Swivel Nut
200 PSI
90° External Pipe to External
“B” coupler
200 PSI
Standard B
Oxygen Nut
Standard B
Oxygen Hose
Coupler
Standard B
Oxygen Hose
Coupler
MNPT
A-322
Oxygen
A-334
Oxygen
Thread Size
“B” 9/16”-18-RH-EXT
1/4” MNPT
Thread Size
Part No.
“B” 9/16”-18-RH-INT
“B” 9/16”-18-RH-INT
A-322
A-194
Fuel Gas
Thread Size
1/4” MNPT
Thread Size
“B” 9/16”-18-RH-EXT
Part No.
A-334
Fuel Gas
Thread Size
“B” 9/16”-18-LH-EXT
Thread Size
Part No.
“B” 9/16”-18-LH-INT
A-323
Hose Couplers (Brass)
200 PSI
Thread Size
Thread Size
Part No.
1/4” MNPT
“B” 9/16”-18-LH-EXT
A-335
Regulator Outlet Adaptors
C-50
B-28
200 PSI
B-28SS
Oxygen
Oxygen
Thread Size
“A” 3/8”-24-RH-EXT
“B” 9/16”-18-RH-EXT
“B” 9/16”-18-RH-EXT
“C” 7/8”-14-RH-EXT
“D” 1-1/4” - 12-RH-EXT
Thread Size
“A” 3/8”-24-RH-EXT
“A” 3/8”-24-RH-EXT
“B” 9/16”-18-RH-EXT
“C” 7/8”-14-RH-EXT
“D” 1-1/4” - 12-RH-EXT
Part No.
C-10
C-20
C-50
C-80
C-90
Fuel Gas
Thread Size
“A” 3/8”-24LH-EXT
“B” 9/16”-18LH-EXT
“B” 9/16”-18LH-EXT
“C” 7/8”-14-LH-EXT
“D” 1-1/4” - 12-LH-EXT
Call
Thread Size
“A” 3/8”-24-LH-EXT
“A” 3/8”-24-LH-EXT
“B” 9/16”-18-LH-EXT
“C” 7/8”-14-LH-EXT
“D” 1-1/4” - 12-LH-EXT
Part No.
C-11
C-21
C-51
C-81
C-91
Thread Size
1/8” MNPT
1/8” MNPT
1/4” MNPT
1/4” MNPT
1/4” MNPT
3/8” MNPT
1/2” MNPT
1/2” MNPT
3/4” MNPT
Thread Size
“A” 3/8”-24-RH-EXT
“B” 9/16”-18-RH-EXT
“A” 3/8”-24-RH-EXT
“B” 9/16”-18-RH-EXT
“B” 9/16”-18-RH-EXT
“B” 9/16”-18-RH-EXT
“C” 7/8”-14-RH-EXT
“D” 1-1/4” - 12-RH-EXT
“D” 1-1/4” - 12-RH-EXT
Part No.
B-6
B-8
B-26
B-28
B-28SS
B-50
B-66
B-72
B-74
Fuel Gas
Thread Size
1/8” MNPT
1/8” MNPT
1/4” MNPT
1/4” MNPT
3/8” MNPT
1/2” MNPT
Thread Size
“A” 3/8”-24-LH-EXT
“B” 9/16”-18-LH-EXT
“A” 3/8”-24-LH-EXT
“B” 9/16”-18-LH-EXT
“B” 9/16”-18-LH-EXT
“C” 7/8”-14-LH-EXT
for more information or to place an order ‡ZZZVXSHULRUSURGFRP
Part No.
B-7
B-9
B-27
B-29
B-51
B-67
9
check valves
Check Valves
Torch Type Check Valve
Inlet
Flow
Outlet
Part No.
200 PSI
Oxygen “A” 3/8”-24-RH-EXT
>
“A” 3/8”-24-RH-INT
CV-10R
Fuel Gas “A” 3/8”-24-LH-EXT
>
“A” 3/8”-24-LH-INT
CV-11L
CV-10R
B-Size One Piece Torch Type
CV-20R
Regulator Bushing Adaptor Type
200 PSI
Oxygen “B” 9/16”-18-RH-EXT
>
“B” 9/16”-18-RH-INT
CV-20R
Fuel “B” 9/16”-18-LH-EXT
>
“B” 9/16”-18-LH-INT
CV-21L
Oxygen “B” 9/16”-RH-INT
>
“B” 9/16”-18-RH-EXT
CV-128R
Fuel Gas“B” 9/16”-LH-INT
>
“B” 9/16”-18-LH-EXT
CV-129L
1/4” MNPT
>
“B” 9/16”-18-RH-EXT
CV-28R
1/4” MNPT
>
“B” 9/16”-18-LH-INT
CV-29L
200 PSI
CV-128R
200 PSI
Low Pressure Inline Check Valves
CV-25
1/4” MNPT
>
1/4” MNPT
CV-24
1/4” MNPT
>
1/4” FNPT
CV-25
1/4” FNPT
>
1/4” FNPT
CV-26
High Pressure Inline Check Valves
3000 PSI
1/4” MNPT
>
1/4” MNPT
CV-215
1/4” MNPT
>
1/4” FNPT
CV-219
1/4” FNPT
>
1/4” FNPT
CV-229
1/4” FNPT
>
1/4” MNPT
CV-230
CV-230
6000 PSI
Stainless Steel Inline Check Valves
CV-219SS
10
1/4” MNPT
>
1/4” MNPT
CV-215SS
1/4” MNPT
>
1/4” FNPT
CV-219SS
1/4” FNPT
>
1/4” FNPT
CV-229SS
1/4” FNPT
>
1/4” MNPT
CV-230SS
www.superiorprod.com
ÁDVKDUUHVWRUVTXLFNFRQQHFWRUV
ÀDVKDUUHVWRUV
‡'HVLJQHGIRU³%´WRUFKKRVH¿WWLQJV
‡%XLOWLQFKHFNYDOYHSUHYHQWVUHYHUVHÀRZRIJDV
‡%URQ]HVLQWHUHGHOHPHQWVWRSVPXOWLSOHÀDVKHV
QRUHVHWWLQJUHTXLUHG
‡8//LVWHG
‡3XUFKDVHDV323GLVSOD\SDFNRUDVLQGLYLGXDOFRPSRQHQWV
‡+LJK)ORZ&DSDFLW\
‡36,LVPLQLPXPSUHVVXUHIRUJDVWRÀRZ
*Always leak test system before pressurizing
*Always bleed the system before disconnecting
Description
200 PSI
Part No.
Oxygen/Fuel Gas Set, Regulator Style, POP Display
Oxygen/Fuel Gas Set, Torch Style, POP Display
Individual Oxygen Arrestor, Regulator Style
Individual Fuel Gas Arrestor, Regulator Style
Individual Oxygen Arrestor, Torch Style
Individual Fuel Gas Arrestor, Torch Style
FBK-100
FBK-200
FB-122
FB-123
FB-222
FB-223
TXLFNFRQQHFWRUV
‡'XUDEOHEUDVVFRXSOLQJSLQ
‡'HVLJQHGIRU³%´WRUFKDQGKRVH¿WWLQJV
‡'HVLJQJXLGHGE\,62VDIHW\VWDQGDUGV
‡1RQLQWHUFKDQJHDEOHR[\JHQIXHOJDVFRQQHFWRUVSUHYHQWFURVVFRQQHFWLRQV
‡%XLOWLQDXWRPDWLFJDVFXWRIIVVKXWGRZQXSVWUHDPJDVHVZKHQGLVFRQQHFWHG
*Always leak test system before pressurizing
*Always bleed the system before disconnecting
Oxygen: 200 PSI Max
Description
Oxygen & Fuel Gas Set, Torch Style, POP Display
Oxygen Set, Torch Style
Fuel Gas Set, Torch Style
Oxygen & Fuel Gas Set, Regulator Style, POP Display
Oxygen Set, Regulator Style
Fuel Gas Set, Regulator Style
Oxygen & Fuel Gas Set, Hose Style, POP Display
Oxygen Set, Hose Style
Fuel Gas Set, Hose Style
Replacement Pins for Above Parts:
Male Pin, Oxygen, Torch Style, 9/16-18 RH-INT
Male Pin, Fuel Gas, Torch Style, 9/16-18 LH-INT
Male Pin, Oxygen, Regulator Style, 9/16-18 RH-INT
Male Pin, Fuel Gas, Regulator Style, 9/16-18 LH-INT
Male Pin, Oxygen, Hose Style, 9/16-18 RH-EXT
Male Pin, Fuel Gas, Hose Style, 9/16-18 LH-EXT
Call
Fuel Gas: 50 PSI Max
Part No.
QCT-100
QCT-112
QCT-113
QCR-200
QCR-222
QCR-223
QCH-300
QCH-332
QCH-333
Part No.
QCT-112-PIN
QCT-113-PIN
QCT-222-PIN
QCT-223-PIN
QCH-332-PIN
QCH-333-PIN
for more information or to place an order ‡ZZZVXSHULRUSURGFRP
11
engineering, manufacturing, and logistics
Superior Products is dedicated to providing solutions for all parts of your business: from the
innovative product lines we manufacture, to the new technology we offer as a business solutions
partner.
2XUVWDUWWR¿QLVKVROXWLRQVLQFOXGH
design and engineering, manufacturing, reliable
customer service and logistical support.
MADE TO ORDER (MTO)
Superior Products offers a Made To Order (MTO)
3URJUDPIRUVSHFLDOW\JDV¿WWLQJV$GHGLFDWHG
manufacturing cell can machine and deliver
parts with a reduced lead time - typically within
two weeks. The MTO program is perfect for
managing inventories of low-demand parts,
prototyping parts, and running small volumes of
custom parts.
ENGINEERING EXCELLENCE
Superior Products realizes that not all standard
parts work for all applications. We can
PDQXIDFWXUHSDUWVWR\RXUVSHFL¿FDWLRQVRUKHOS
you design a part to meet your application.
Superior Products designs custom gas
management systems, engineered to:
‡ ,PSURYHHI¿FLHQF\
‡ Work within challenging space constraints
‡ Manage gas usage
‡ Provide the most effective layout
‡ Better meet the application’s overall needs
,I\RXGRQRWVHHZKDW\RXQHHGLQWKLVFDWDORJMXVWFDOODQG
OHWXVKHOS\RXGHVLJQZKDW\RXQHHG
LOGISTICS
)RUDTXRWHRUPRUHLQIRUPDWLRQSOHDVHFRQWDFWRXU
&XVWRPHU&DUHGHSDUWPHQWDW
SUPPLY CHAIN MANAGEMENT
Our online Customer Managements System
allows you to easily manage your supply chain
with around the clock access to:
‡ Part pricing and availability
‡ Shipment tracking
‡ Procurement planning
‡ Inventory management
‡ Quotes
‡ Orders
‡ Invoices
‡ 3DUWVSHFL¿FDWLRQV
‡ Quality Control
‡ Account information
Superior Products offers a number of logistics
solutions for order and inventory needs.
‡ Superior Products can inventory parts and
drop ship/blind drop ship for you.
‡ A Kanban system can be implemented to
ensure you
y have the necessary parts on
hand.
QUALITY
Beyond our ISO 9001:2000 registration, all of
our employees and S.P. teams they support
have committed themselves to delivering the
KLJKHVWTXDOLW\SURGXFWVLQWKHFRPSUHVVHGJDV
industry. Our Superior Products Quality
Teams
ality Tea
ams
DUHFRPPLWWHGWRTXDOLW\,ILWKDVWKH
logo on it you can be assured it is the best.
9LVLWFPVVXSHULRUSURGFRPWRVLJQXSRUOHDUQPRUH
12
www.superiorprod.com
EUDVVVWDLQOHVVVWHHOSLSHWKUHDGÀWWLQJV
Brass: Maximum Pressure 3,000 PSI
Stainless Steel (SS): Maximum Pressure 6,000 PSI
Brass/Stainless Steel Pipe Thread Fittings
Thread Size
90° Elbow
PEL-4HP
Material
Part No.
1/8” FNPT x 1/8” FNPT
Brass
PEL-2HP
1/4” FNPT x 1/4” FNPT
Brass
PEL-4HP
1/2” FNPT x 1/2” FNPT
Brass
PEL-8HP
1/4” FNPT x 1/4” FNPT
SS
PEL-4SS
1/8” FNPT x 1/8” MNPT
Brass
PL-2HP
1/4” FNPT x 1/4” MNPT
Brass
PL-4HP
3/8” FNPT x 3/8” MNPT
Brass
PL-6HP
1/2” FNPT x 1/2” MNPT
Brass
PL-8HP
1/4” FNPT x 1/4” MNPT
SS
PL-4SS
1/8” FNPT x 1/8” MNPT
Brass
PSL-2-2HP
1/4” FNPT x 1/4” MNPT
Brass
PSL-4-4HP
1/4” FNPT x 1/4” MNPT
SS
PSL-4SS
1/8” FNPT
Brass
P-52
1/4” FNPT
Brass
P-54
3/8” FNPT
Brass
P-56
1/2” FNPT
Brass
P-58
1/8” FNPT (3)
Brass
PFT-2HP
1/4” FNPT (3)
Brass
PFT-4HP
1/2” FNPT (3)
Brass
PFT-8HP
1/4” FNPT (3)
SS
PFT-4SS
1/8” FNPT (2) x 1/8” MNPT
Brass
PST-2HP
1/4” FNPT (2) x 1/4” MNPT
Brass
PST-4HP
1/8” FNPT (4)
Brass
PCR-2HP
1/4” FNPT (4)
Brass
PCR-4HP
1/4” FNPT (4)
SS
PCR-4SS
PEL-4SS
90° Street Elbow
PL-4HP
PL-4SS
45° Street Elbow
PSL-4-4HP
PSL-4SS
Cap
P-54
Tee
PFT-4HP
PFT-4SS
Street Tee
PST-4HP
Cross
PCR-4HP
Call
PCR-4SS
PCR 4SS
for more information or to place an order ‡ZZZVXSHULRUSURGFRP
13
EUDVVVWDLQOHVVVWHHOSLSHWKUHDGÀWWLQJV
Brass: Maximum Pressure 3,000 PSI
Stainless Steel (SS): Maximum Pressure 6,000 PSI
Brass/Stainless Steel Pipe Thread Fittings
Hex Brass Nipples
B-241
B-215SS
Hex Head Plug
P-4
Adaptors
Ad
da
B-219
Thread Size
1/8” MNPT x 1/8” MNPT
1/4” MNPT x 1/8” MNPT
1/4” MNPT x 1/4” MNPT
1/4” MNPT x 1/4” MNPT
3/8” MNPT x 3/8” MNPT
3/8” MNPT x 1/4” MNPT
1/2” MNPT x 1/4” MNPT
1/2” MNPT x 3/8” MNPT
1/2” MNPT x 1/2” MNPT
Part No.
B-200
B-206
B-215
B-215SS
B-222
B-239
B-241
B-242
B-243
1/8” MNPT
1/4” MNPT
1/2” MNPT
Brass
Brass
Brass
P-2
P-4
P-8
1/4” FNPT x 1/4” MNPT
1/4” FNPT x 1/4” MNPT
1/8” FNPT x 1/8” MNPT
1/4” FNPT x 1/8” MNPT
3/8” FNPT x 1/4” MNPT
1/2” FNPT x 1/4” MNPT
Brass
SS
Brass
Brass
Brass
Brass
B-219
B-219SS
B-293
B-294
B-296
B-299
1/8” FNPT x 1/8” FNPT
1/4” FNPT x 1/8” FNPT
1/4” FNPT x 1/4” FNPT
1/4” FNPT x 1/4” FNPT
1/2” FNPT x 1/4” FNPT
1/2” FNPT x 1/2” FNPT
Brass
Brass
Brass
SS
Brass
Brass
B-201
B-207
B-218
B-218SS
B-231
B-233
1/4” MNPT x 1/8” FNPT
3/8” MNPT x 1/4” FNPT
1/2” MNPT x 1/4” FNPT
1/2” MNPT x 3/8” FNPT
3/4” MNPT x 1/4” FNPT
3/4” MNPT x 1/2” FNPT
Brass
Brass
Brass
Brass
Brass
Brass
B-280
B-282
B-284
B-285
B-286
B-288
1/8” MNPT, 1.5” Long
1/4” MNPT, 1.5” Long
1/4” MNPT, 2.0” Long
1/4” MNPT, 2.5” Long
1/4” MNPT, 3.0” Long
1/4” MNPT, 3.5” Long
Brass
Brass
Brass
Brass
Brass
Brass
PNP-2-15
PNP-4-15
PNP-4-20
PNP-4-25
PNP-4-30
PNP-4-35
1/8” FNPT x1/8” MNPT, 2.5” Long
1/4” FNPT x 1/4”MNPT, 3.0” Long
Brass
Brass
B-395
B-430
B-219SS
Connectors
B-218
B-218SS
Reducer Bushing
g
B-284
Round Brass Nipples
PNP-4-25
Pipe
p Extension
B-430
14
Material
Brass
Brass
Brass
SS
Brass
Brass
Brass
Brass
Brass
www.superiorprod.com
brass hose ferrules, braces & clamps
Round Brass Hose Ferrules
Oval Brass Dual Hose Braces
Maximum Pressure 200 PSI
Standard Package: 25
Diameter(INT)
.330”
.358”
.380”
.410”
.450”
.478”
.500”
.500”
.525”
.525”
.531”
.548”
.562”
.564”
.575”
.593”
.600”
.625”
.625”
.650”
.656”
.675”
.687”
.700”
.718”
.725”
.750”
.750”
.781”
.812”
.850”
.875”
.900”
.937”
.975”
Length
1/2”
1/2”
1/2”
1/2”
9/16”
11/16”
1/2”
1”
1”
1/2”
1”
31/64”
1”
3/4”
31/64”
1”
1/2”
1/2”
1”
1/2”
1”
33/64”
1”
33/64”
1”
17/32”
17/32”
1”
1”
1”
9/16”
27/32”
27/32”
27/32”
27/32”
Part No.
6231
833
622
620
769
4750
624
7322
7323
625
7324
626
7325
3588
KK
7326
JJ
II
7327
HH
7328
GG
7329
FF
7330
EE
DD
7331
7332
7333
Z
7244A
5029A
7242A
5028A
Dimension(INT)
.448 x .890
.474 x .943
.535 x 1.071
.593 x 1.109
.593 x 1.238
.700 x 1.325
Length
15/32”
15/32”
3/4”
3/4”
3/4”
3/4”
Metal Gauge
.019”
.019”
.024”
.024”
.025”
.025”
Part No.
9116
9979
9940P
9593
453
454
Gas Leak Detector, Oxygen Safe
Description
8 oz. Reusable Plastic Applicators
Part No.
LD-008
*DOORQ&RQWDLQHUIRU5H¿OOLQJ$SSOLFDWRUV LD-128
NOTE: Hose diameters may vary, check for proper
inside diameter of the ferrules.
Call
for more information or to place an order ‡ZZZVXSHULRUSURGFRP
15
hose repair kits
REPAIR KITS:
Hose Connections, Crimping Tools & Pipe Fittings
RK-26
RK-27
Description
Part No.
6XSHULRUKRVHUHSDLUNLWVLQFOXGH¿WWLQJVQXWVQLSSOHVVSOLFHUVFRXSOHUVDQGIHUUXOHVIRUWKHVWDWHGKRVH,'DQGWKUHDGVL]H$OVR
LQFOXGHGZLWKWKHNLWVDUHDRUKROHYLVHJULSFULPSLQJWRROIRUIDVWHDV\DQGUHOLDEOHFULPSLQJRIWKHKRVH¿WWLQJV$OONLWVFRPHLQD
VHFWLRQHGSODVWLFFDVHZLWKLQVWUXFWLRQVDQG¿WWLQJGHVFULSWLRQFKDUWVNEW $OONLWVDUHDYDLODEOHZLWKRXWWKHFULPSLQJWRRODQGMXVWWKH¿WWLQJV
that you need if you already have a crimper. To order the kit you want without a crimping tool, add LT to the back of the kit part number. For
H[DPSOHWKH5./7ZLOOJHW\RXMXVWWKHUHSODFHPHQW¿WWLQJVLQWKHVDPHVHFWLRQHGER[
³%´KRVH¿WWLQJVZLWK.7&ULPSLQJ7RRO&RQWDLQVQXWVQLSSOHVFRXSOHUVVSOLFHUVDQGIHUUXOHVIRU´DQG´,'KRVH
RK-24
³%´KRVH¿WWLQJV¿WWLQJVRQO\QLSSOHVFRXSOHUVVSOLFHUVDQGIHUUXOHVIRU´DQG´,'KRVH
RK-24LT
³$´DQG³%´KRVH¿WWLQJVZLWK.7&ULPSLQJ7RRO&RQWDLQVQXWVQLSSOHVFRXSOHUVVSOLFHUVDQGIHUUXOHVIRU´DQG´,'KRVH
RK-26
³$´DQG³%´KRVH¿WWLQJVRQO\QXWVQLSSOHVFRXSOHUVVSOLFHUVDQGIHUUXOHVIRU´DQG´,'KRVH
RK-26LT
³%´KRVH¿WWLQJVZLWK.7&ULPSLQJ7RRO&RQWDLQVQXWVQLSSOHVFRXSOHUVVSOLFHUVDQGIHUUXOHVIRU´,'KRVH
RK-27
³%´KRVH¿WWLQJVRQO\&RQWDLQVQXWVQLSSOHVFRXSOHUVVSOLFHUVDQGIHUUXOHVIRU´,'KRVH
RK-27LT
³%´KRVH¿WWLQJVZLWK.7&ULPSLQJ7RRO&RQWDLQVQXWVQLSSOHVFRXSOHUVVSOLFHUVDQGIHUUXOHVIRU´´,'KRVH
RK-28
³%´KRVH¿WWLQJVRQO\&RQWDLQVQXWVQLSSOHVFRXSOHUVVSOLFHUVDQGIHUUXOHVIRU´´,'KRVH
RK-28LT
)HUUXOHVRQO\ZLWK.7&ULPSLQJ7RROIRU´DQG´,'KRVH
RK-30
Ferrules only for 1/4” and 3/16” I.D. hose
RK-30LT
³%´KRVH¿WWLQJVRQO\&RQWDLQVQXWVQLSSOHVFRXSOHUVVSOLFHUVDQGIHUUXOHVIRU´DQG´,'KRVH
RK-35LT
,QHUWKRVH¿WWLQJVZLWK.7FULPSLQJWRRO&RQWDLQVQXWVQLSSOHVFRXSOHUVVSOLFHUVDQGIHUUXOHVIRU´,'KRVH
RK-50
,QHUWKRVH¿WWLQJVRQO\&RQWDLQVQXWVQLSSOHVFRXSOHUVVSOLFHUVDQGIHUUXOHVIRU´,'KRVH
RK-50LT
Ferrule Crimping Tools, Vice Grip Type
Description
Part No.
2-Hole Jaws to Crimp
1/2” wide to crimp 3/16” - 1/4” Hose
KT-28
2-Hole Jaws to Crimp
1/2” wide to crimp 5/8” - 11/16” Hose
KT-29
3-Hole Jaws to Crimp
1/2” wide to crimp 5/16”, 11/32”, 27/64” Hose
Diameters 7/16” and 9/16” on Twin or Single Hose
KT-30
KT-28
KT-29
*No hammer, vise, or other tool needed. Insert hose with ferrule and splicer or nut and
QLSSOHLQSURSHUKROH2IIVHWWRRODSSUR[LPDWHO\´IURPHQGRIIHUUXOHDQGVTXHH]H
0DNHWXUQDQGVTXHH]HDJDLQ
KT-30
Description
Part No.
Bench top, 5-die, cripmer
Die sizes for 5/8”, 37/64”, 17/32”, 31/64”, and 11/16” diameters.
SCR-100
16
www.superiorprod.com
SCR-100
power cable nipples & connector assemblies
Brass Nipple & Copper Tube Assembly
Maximum Pressure 200 PSI
Part No.
Description
CN-16
“B” Brass Nipple x .225” O.D. Copper Tube, Max.140” Dia. Cable Hole
CN-16*
“B” Brass Nipple x .322” O.D. Copper Tube, Max.246” Dia. Cable Hole
CN-20*
* use with nuts N-2400 or N-2500
CN-36
“C” Brass Nipple x .263” O.D. Copper Tube & Max.166” Dia. Cable Hole
CN-32*
“C” Brass Nipple x .322” O.D. Copper Tube & Max.246” Dia. Cable Hole
CN-36*
* use with nuts N-3600 or N-3700
“C” Brass Nipple x .225” O.D. Copper Tube & Max.140” Dia. Cable Hole
CN-28*
* use with nuts N-34 or N-35
CN-28
Power Cable Connector w/ Brass Swivel Nut & Nipple Soldered to Copper Tube for Crimping
Description
Part No.
“A” Brass Nipple with 3/8”-24 RH-EXT Brass Nut
x .322” O.D Copper Tube and Max .246” Cable Hole
CN-48
“A” Brass Nipple with 3/8”-24 LH EXT Brass Nut
x .322” O.D. Copper Tube and Max .246” Cable Hole
CN-49
“A” Brass Nipple with 3/8”-24 RH EXT Brass Nut
x .322” O.D Copper Tube and Max .246” Cable Hole
CN-54
CN-54
.21” Dia. Brass Nipple with 1/4”-28 INT Brass Nut
x .225 O.D. Copper Tube and Max .140” Cable Hole
CN-60
CN-60
CN-68
CN-68
.37” Dia. Brass Nipple with 7/16”-20 INT Brass Nut
x .375 O.D. Copper Tube and Max .245” Cable Hole
“B” Brass Nipple with 5/8”-18 EXT Brass Nut
x .468 O.D. Copper Tube and Max .328” Cable Hole
CN-72
CN-48
CN-72
Brass Power Cable Nipples (One Piece)
CN-10
Call
Description
Part No.
“A” Nipple x .250” O.D. Tube
and Max .203” Diameter Cable Hole * use with nuts N-14 or N-15
CN-6*
“B” Nipple x .375” O.D. Tube (.420”O.D. Barbs) Hole
and Max .312” Diameter Cable * use with nuts N-2400 or N-2500
CN-10*
for more information or to place an order ‡ZZZVXSHULRUSURGFRP
17
hose connections for inert arc welders
Maximum Pressure 200 PSI
Air-Water Coupler
Thread Size
Part No.
5/8”-18-RH-EXT x 5/8”-18-RH-EXT
5/8”-18-RH-EXT x 9/16”-18-RH-EXT
5/8”-18-LH-EXT x 9/16”-18-LH-EXT
C-130
C-134
C-135
Thread Size
Part No.
C-134
Air-Water Adaptor
1/8” MNPT x
1/4” MNPT x
1/4” MNPT x
1/4” MNPT x
A-404
5/8”-18-RH-INT
5/8”-18-RH-INT
5/8”-18-LH-INT
5/8”-18-RH-EXT
A-402
A-404
A-405
A-450
Air-Water Hose Adaptors with Swivel Nuts
Thread Size
A-478
A-424
A-462
Part No.
1/4” MNPT 5/8”-18-RH- EXT “B”
1/4” MNPT 5/8”-18-LH- EXT “B”
“B” 5/8”-18-RH-EXT-90 5/8”-18-RH- INT “B”
“B“ 5/8”-18-RH-EXT x “B” 9/16”-18-RH-EXT
“B” 5/8”-18-RH-INT x “B” 9/16”-18-RH-INT
“B” 5/8”-18-RH-INT x “B” 9/16”-18-RH-INT (one piece)
A-414
A-415
A-424
A-462
A-478
A-479
Inert Arc Hose Nuts
Thread Size
N-2400
18
“A” 3/8”-24-RH-EXT
“A” 3/8”-24-LH-EXT
“B” 5/8”-18-RH-EXT
“B” 5/8”-18-LH-EXT
“C” 7/8”-14-RH-EXT
“C” 7/8”-14-LH-EXT
Part No.
Use with:
NP-66, 67, “A” Cable Connectors
NP-66, 67, “A” Cable Connectors
NP-69, 70, 72, 73, 74, 76, “B” Cable Connectors
NP-69, 70, 72, 73, 74, 76, “B” Cable Connectors
NP-606, “C” Cable Connectors
NP-606, “C” Cable Connectors
www.superiorprod.com
N-14
N-15
N-2400
N-2500
N-3600
N-3700
hose connections for inert arc welders
Air-Water Nut
Maximum Pressure 200 PSI
Part No.
Thread Size
5/8”-18-RH-INT
Use with:
NP-595, NP-596
N-26
N-26
Inert Arc Barb Hose Nipples
Description
NP-73
“A”-size
“B”-size
“B”-size
“B”-size
“B”-size
“B” Special 1/4” barb
“B”-size
“B”-size
For Hose Size
1/8” I.D.
1/8” I.D. undersize
1/8” I.D.
3/16” I.D.
1/4” I.D.
1/4” I.D.
5/16” I.D.
3/8” I.D.
Use With Nuts
N-14, N-15
N-2400, N-2500
N-2400, N-2500
N-2400, N-2500
N-2400, N-2500
N-2400, N-2500
N-2400, N-2500
N-2400, N-2500
Inert Arc Hose Couplers
Thread Size
C-124
Call
3/8”-24-RH-INT “A”
3/8”-24-LH-INT “A”
1/4” FNPT
1/4” FNPT
5/8”-18-RH INT “B”
5/8”-18-LH INT “B”
7/8”-14-RH-INT “C”
7/8”-14-LH-INT “C”
Thread Size
Part No.
NP-66
NP-68
NP-69
NP-70
NP-72
NP-73
NP-74
NP-76
Maximum Pressure 200 PSI
Part No.
3/8”-24-RH-INT “A”
3/8”-24-LH-INT “A”
5/8”-18-RH-INT “B”
5/8”-18-LH-INT “B”
5/8”-18-RH INT “B”
5/8”-18-LH INT “B”
7/8”-14-RH-INT “C”
7/8”-14-LH-INT “C”
for more information or to place an order ‡ZZZVXSHULRUSURGFRP
C-118
C-119
C-124
C-125
C-126
C-127
C-144
C-145
19
%ULWLVKVW\OHÀWWLQJV
H.P. Cylinder Connectors
BS-341-3 Oxygen, Inert Gases
Maximum Pressure (300 bar) 4350 PSI
Part
Description
Material
Part No.
Nut
5/8”A-RH-EXT
Brass
BN-341-3
Nut-HT
5/8”A-RH-EXT
Brass, Plastic Grip
Nipple
1/4” NPT-M, 2.5”Long
Brass
Hex Nuts
Handtight Nuts
BNH-341-3
Nipple-Threaded Inlets
BNP-341-3-2.5
Nipple-Handtight
Nipple-HT
1/4” NPT-M, 3.5”Long
Brass
BNP-341-3W-3.5
Replacement Items
“O”Ring
For BNP-341-3W-3.5
Adaptor
Adaptor
From CGA 540 (Oxygen)
From CGA 580 (Inerts)
OR-580
Nitrile
Adaptor
Brass
Brass
BS-341-2 Flammables
Hex Nuts
BA-540
BA-580
Maximum Pressure (300 bar) 4350 PSI
Part
Description
Material
Part No.
Nut
G 5/8 A-LH-EXT
Brass
BN-341-2
Nipple
1/4” NPT-M, 2.5”Long
Brass
BNP-341-3-2.5
Nipple-HT
1/4” NPT-M, 3.5”Long
Brass
BNP-341-3W-3.5
“O”Ring
For BNP-341-3W-3.5
Nitrile
OR-580
Adaptor
From CGA 510
Brass
BA-510
Nipple-Threaded Inlets
Nipple-Handtight
Replacement Items
Adaptor
20
www.superiorprod.com
%ULWLVK*HUPDQVW\OHÀWWLQJV
L.P. Hose Connectors
Part
Description
Maximum Pressure 200 PSI
Material
Part No.
Nut
Nut
3/8” R.H. Oxygen, Inerts
3/8” L.H. Fuel Gas, Combustibles
Brass
Brass
BN-375RH
BN-375LH
Nipple
Nipple
1/4” ID Hose, used for 3/8” Nut
5/16” ID Hose, used for 3/8” Nut
Brass
Brass
BNP-375-4
BNP-375-5
Hex Nuts
Nipple- Hose Barb
German Style Fittings
DIN-477 Connectors
DIN-6 Inert Gases
Maximum Pressure (300 bar) 4350 PSI
Part
Description
Material
Part No.
Nut
W 21.80 x 1/14-RH-INT
Brass
DN-477-06
Nipple
1/4” NPT-M, 3.5”Long
Brass
DNP-477-6-3.5
Washer
For Nipple
Nylon
DW-477-6N
Hex Nuts
Nipple-Threaded Inlets
Replacement Items
Maximum Pressure (300 bar) 4350 PSI
DIN-9 Oxygen
Hex Nuts
Part
Description
Material
Part No.
Nut
R 3/4-RH-INT
Brass
DN-477-09
Nipple
1/4” NPT-M, 3.5”Long
Brass
DNP-477-6-3.5
Washer
For Nipple
Nylon
DW-477-6N
Nipple-Threaded Inlets
Replacement Itemss
Call
for more information or to place an order ‡ZZZVXSHULRUSURGFRP
21
*HUPDQVWDQGDUGÀWWLQJV
DIN-10 Nitrogen
Hex Nuts
Maximum Pressure (300 bar) 4350 PSI
Part
Description
Material
Part No.
Nut
W 24.32 x 1/14-RH-INT
Brass
DN-477-10
Nipple
1/4” NPT-M, 3.5”Long
Brass
DNP-477-6-3.5
Washer
For Nipple
Nylon
DW-477-6N
Nipple-Threaded Inlets
Replacement Items
DIN-12 Nitrous Oxide
Hex Nuts
Maximum Pressure (300 bar) 4350 PSI
Part
Description
Material
Part No.
Nut
R 3/4-RH-EXT
Brass
DN-477-12
Nipple
1/4” NPT-M, 3.5”Long
Brass
DNP-477-6-3.5
Washer
For Nipple
Nylon
DW-477-6N
Nipple-Threaded Inlets
Replacement Items
22
www.superiorprod.com
cga nuts and nipples - basic information
Product specification guide and
ordering information for regulator
inlet nuts and nipples
Superior Products offers nuts and nipples
LQDYDULHW\RIPDWHULDOVDQGVW\OHVWR¿W
DIXOOUDQJHRIJDVVHUYLFHUHTXLUHPHQWV
Seven different types of nut/nipple
combinations are available:
‡%UDVVQXWDQGQLSSOH
‡6WDLQOHVVVWHHOQXWDQGQLSSOH
‡%UDVVFKURPHSODWHGQXWDQGQLSSOH
‡1XWDQGQLSSOHZLWKFKHFNYDOYH
‡1XWDQGQLSSOHUHFHVVHGIRUWXELQJ
‡+DQGWLJKWQXWDQGQLSSOH
‡4XLFNFRQQHFWQXWDQGQLSSOH
Please note that all types may not be
available for every CGA.
Nipples with check valves
Hand tight nuts and nipples
Nipples with integral check valves are
designed to provide additional safety
in gas management systems and other
HTXLSPHQW
Superior Products hand tight nuts are
available in brass or with plastic grips.
‡&KHFNYDOYHQLSSOHVFDQEHEXLOWLQWR
pigtails, tee connections and manifold
EORFNVWRUHVLVWEDFNÀRZRIJDVHVIURP
OLQHVHTXLSPHQWDQGF\OLQGHUV
‡&KHFNYDOYHVDUHIDFWRU\LQVWDOOHGDQG
are 100% tested.
‡$YDLODEOHLQEUDVVDQGVWDLQOHVVVWHHO
‡&KHFNYDOYHVDUHIRUUHYHUVHÀRZV
only - they are not to be used as
ÀDVKEDFNDUUHVWRUV
‡ :KHQXVLQJKLJKSUHVVXUHF\OLQGHU
valve connections you should always
refer to the Compressed Gas
Association V-7 and/or V-7.1 for the
correct method of determining cylinder
valve outlet connection.
‡$OOQXWVDUHPDFKLQHGWR&*$
VSHFL¿FDWLRQVDQGGHVLJQHGZLWKZUHQFK
ÀDWV
‡6RIWWLSRURULQJW\SHQLSSOHVDOZD\V
should be used with hand tight nuts.
‡&*$¿WWLQJVUDWHGRYHU36,GRQRW
KDYHVRIWWLSVDQG¿QDOJDVWLJKWVHDWLQJ
UHTXLUHVDZUHQFKWRWLJKWHQ
ORDERING INFORMATION
INLET NIPPLES FILETERS
Add “RF” to end of nipple part numbers listed
under the CGA numbers for Installed Filters
Most brass and chrome plated nipples may be ordered in
DQ\RIWKHIROORZLQJWZRFRQ¿JXUDWLRQV
([DPSOH13ZLWK¿OWHUEHFRPHV135)
BRASS AND CHROME PLATED BRASS
NIPPLES WITHOUT FILTERS
BRASS AND CHROME PLATED BRASS
NIPPLES WITH INSTALLED FILTERS
‡6LPSO\RUGHUWKHSDUWQXPEHUVDVOLVWHGXQGHUWKH&*$QXPEHUV ‡$GG³5)´WRHQGRIQLSSOHSDUWQXPEHUVOLVWHGXQGHUWKH
CGA numbers
‡3OHDVHQRWHWKDWDOO6XSHULRU3URGXFWVQLSSOHVFRPHVWDQGDUG
‡6RPHQLSSOHVUHTXLUH¿OWHUVWREHLQ137HQGRIQLSSOHV
ZLWK¿OWHUUHFHVVVRD¿OWHUFDQEHDGGHG
Part No.
FILTERS FOR REGULATOR
NIPPLE RETAINING RING
F-7
3RURXVPHWDO¿OWHUVLQWHUHGEURQ]HQLFNHO
plated), rated at 35 microns 6000psi
F-8
3RURXVPHWDO¿OWHUVLQWHUHGEURQ]HQLFNHO
plated), rated at 35 microns 6000psi
XSR-020
C-clip available to hold nut in position and
protect nipple seating area.
CGA check valve nipples are factory
tested and installed in CGA nipples
for additional safety in gas systems,
HWFWRSUHYHQWGDQJHURXVUHYHUVHÀRZ
of gases in lines and other compressed
JDVHTXLSPHQW
NOTE: These check valves protect against
UHYHUVHÀRZRQO\DQGDUHQRWÀDVKEDFN
arrestors.
Also available with the check
valve reversed. Specify “RCV”.
Flow
Part No. NP-210CV
Flow
Part No. NP-210RCV
‡$YDLODEOHLQEUDVVDQGVWDLQOHVVVWHHO
Call
for more information or to place an order ‡ZZZVXSHULRUSURGFRP
23
inlet nuts & nipples
CGA-170 Non-Corrosive Gases In Small Cylinders
Hex Nuts
3,000 PSI
Part
Description
Material
Part No.
Nut
.5625”-18UNF-2B-RH-INT
Brass
N-49
Nut
.5625”-18UNF-2B-RH-INT
SS
N-49SS
Nipple
1/8” NPT, 1.25” Long
Brass
NP-101
Nipple
1/8” NPT, 1.25” Long
SS
NP-101SS
Washer
For Nipple
PTFE
W-60
Nipple-Threaded Inlets
Replacement Items
CGA-180 All Gases In Small Cylinders
Hex Nuts
Nipple-Threaded Inlets
Part
Description
Material
3,000 PSI
Part No.
Nut
.625 -18UNF-2B-RH-INT
Brass
N-50
Nut
.625 -18UNF-2B-RH-INT
CP Brass
MN-050
Nipple
1/8” NPT, 1.75”Long
Brass
NP-109
Nipple
1/8” NPT, 1.75”Long
CP Brass
MNP-109
Washer
For Nipple
PTFE
W-65
Part
Description
Material
500 PSI
Part No.
Nut
.628”-20NGO-RH-INT
Brass
N-57
Nut-HT
.628”-20NGO-RH-INT
Brass, Plastic Grip
HTN-57P
Nipple
1/8” NPT, 1.25”Long
Brass
NP-414
Nipple-HT
1/8” NPT, 2.5”Long
Brass, PTFE
NP-418T3
Replacement Tip
For HT Nipple
PTFE
T418-3
Replacement Items
CGA-200 “MC” acetylene in small cylinders
Hex Nut
Handtight Nut
Nipple-Threaded Inlets
Nipple-Handtight
g
Replacement Item
Add “RF” to end of nipple part numbers listed under the CGA numbers for Installed Filters
24
www.superiorprod.com
inlet nuts & nipples
CGA-280 Medical Breathing Mixtures
Part
Hex Nuts
Description
Material
3,000 PSI
Part No.
Nut
.750” -14NGO-RH-INT
Brass
N-59
Nut
.750” -14NGO-RH-INT
CP Brass
MN-059
Nipple
1/4” NPT, 2.5”Long
Brass
NP-118
Nipple
1/4” NPT, 2.5”Long
CP Brass
MNP-118
Nipple-Threaded Inlets
CGA-296 Industrial Oxygen Mixtures
Hex Nuts
3,000 PSI
Part
Description
Material
Part No.
Nut
.803” -14UNS-2A-RH-EXT
Brass
N-60
Nut
.803” -14UNS-2A-RH-EXT
CP Brass
MN-060
Nut-HT
.803” -14UNS-RH-EXT
Brass
HTN-60
Nipple
1/4” NPT, 3”Long
Brass
NP-123
Nipple
1/4” NPT, 3”Long
CP Brass
MNP-123
Nipple-HT
1/4” NPT, 3”Long w/O-ring
Brass, Nitrile
NP-123W
Nipple-CS
For 5/16” Tube
Brass
NP-122C3
Nipple-CV
1/4” NPT, 3”Long
Brass
NP-123CV
O-Ring
For HT-Nipple
Nitrile
OR-296
Handtight Nut
Nipple-Threaded
Inlets
p
Nipple-Handtight
Nipple-Countersunk
Nipple-Check Valve
Replacement Item
Add “RF” to end of nipple part numbers listed under the CGA numbers for Installed Filters
Call
for more information or to place an order ‡ZZZVXSHULRUSURGFRP
25
regulator inlet nuts & nipples
CGA-300 Ethyl Chlorides (R160) Formerly Commercial Acetylene
Hex Nuts
Handtight Nuts
Nipple-Threaded Inlets
Nipple-Handtight
Nipple-Countersunk
500 PSI
Part
Description
Material
Part No.
Nut
.830”-14NGO-RH-INT
Brass
N-56
Nut
.830”-14NGO-RH-INT
CP Brass
MN-056
Nut-HT
.830”-14NGO-RH-INT
Brass
HTN-56
Nut-HT
.830”-14NGO-RH-INT
Brass, Plastic Grip
HTN-56P
Nipple
Nipple
Nipple
Nipple
1/4” NPT, 2”Long
1/4” NPT, 2.5”Long
1/4” NPT, 3.5”Long
1/4” NPT, 3.5”Long
Brass
Brass
Brass
CP Brass
NP-126
NP-128
NP-130
MNP-130
Nipple-HT
1/4” NPT-2.5”Long
Brass, PTFE
NP-128T3
Nipple-CS
Nipple-CS
Nipple-CS
For 1/4” Tube
For 5/16” Tube
For 3/8” Tube
Brass
Brass
Brass
NP-126C2
NP-126C3
NP-126C4
Nipple-CV
1/4” NPT, 2.5”Long
Brass
NP-128CV
Soft Tip
O-Ring
For HT-Nipple
For O-Ring Nipple
PTFE
Nitrile
T128-3
MR-116
Nipple-Check Valve
Replacement Items
Add “RF” to end of nipple part numbers listed under the CGA numbers for Installed Filters
26
www.superiorprod.com
regulator inlet nuts & nipples
CGA-320 Carbon Dioxide
3,000 PSI
Part
Hex Nuts
Description
Material
Part No.
Nut
.830”-14NGO-RH-INT
Brass
N-61
Nut
.830”-14NGO-RH-INT
SS
N-61SS
Nut
.830”-14NGO-RH-INT
CP Brass
MN-061
Nut-HT
Nut-HT
Nut-HT
.830”-14NGO-RH-INT
.830”-14NGO-RH-INT
.830”-14NGO-RH-INT
Brass
Brass, Plastic Grip
CP Brass, Plastic Grip
HTN-61
HTN-61P
MHN-061P
Nipple-Threaded Inlets
Nipple*
Nipple*
Nipple*
Nipple*
Nipple*
Nipple*
Nipple*
Nipple*
Nipple*
Nipple*
1/4” NPT, 2”Long
1/4” NPT, 2”Long
1/4” NPT, 2”Long
1/4” NPT, 2.5”Long
1/4” NPT, 2.5”Long
1/4” NPT, 2.5” Long
1/4” NPT, 3” Long
1/4”-NPT, 3” Long
1/4” NPT, 3.5” Long
1/2” 27UNS, 2.5” Long
Brass
Brass
CP Brass
Brass
SS
CP Brass
Brass
CP Brass
SS
Brass
NP-147
NP-147SS
MNP-147
NP-150
NP-150SS
MNP-150
NP-151
MNP-151
NP-154SS
NP-152
Nipple-Handtight
Nipple-HT**
Nipple-HT**
Nipple-HT**
1/4” NPT, 2.5” Long
For 1/4” Tube
For 5/16” Tube
Brass
Brass
Brass
NP-150T3
NP-147T3C2
NP-147T3C3
Nipple-CS*
Nipple-CS*
Nipple-CS*
For 1/4” Tube
For 5/16” Tube
For 1/4” Tube
Brass
Brass
SS
NP-147C2
NP-147C3
NP-147C2SS
Nipple-CV*
Nipple-CV*
Nipple-CV*
1/4”NPT, 2.5” Long
1/4”NPT, 2.5” Long
1/4”NPT, 2.5” Long
Brass
CP Brass
SS
NP-150CV
MNP-150CV
NP-150SSCV
Nipple-RPV*
Nipple-RPV-washer*
1/4”NPT, 3” long
1/4”NPT, 3.5” long with
Retractable Pin & Washer
Brass
Brass
NP-151-PIN-SS
NP-154W-RPV
Washer
Washer
Washer
Washer
Pin
For Nipple
For Nipple
For HT-Nipples
For Nipple
For RPV Nipple
Fiber
PTFE
PTFE
Nylon
SS
W-6
W-8
W-10
MYP-011
PIN-NP-SS
*Includes Washer
**Replace washer with W-10 only
Handtight Nuts
Nipple-Countersunk
Nipple-Check Valve
Nipples for use with
Residual Pressure
Valves
Replacement Items
Add “RF” to end of nipple part numbers listed under the CGA numbers for Installed Filters
Call
for more information or to place an order ‡ZZZVXSHULRUSURGFRP
27
regulator inlet nuts & nipples
CGA-326 Nitrous Oxide
Hex Nuts
Handtight Nuts
3,000 PSI
Part
Description
Material
Part No.
Nut
.830”-14NGO-RH-INT
Brass
N-82
Nut
.830”-14NGO-RH-INT
SS
N-82SS
Nut
.830”-14NGO-RH-INT
CP Brass
MN-082
Nut-HT
.830”-14NGO-RH-INT
Brass
HTN-82
Nut-HT
.830”-14NGO-RH-INT
Brass, Plastic Grip
HTN-82P
Nut-HT
.830”-14NGO-RH-INT
CP Brass, Plastic Grip
MHN-082P
Nipple
Nipple
Nipple
Nipple
Nipple
1/4” NPT, 2.125” Long
1/4” NPT, 2.5” Long
1/4” NPT, 2.5” Long
1/4” NPT, 2.5” Long
1/4” NPT, 3” Long
Brass
Brass
SS
CP Brass
Brass
NP-732
NP-733
NP-733SS
MNP-733
NP-734
Nipple-HT
Nipple-HT-CS
1/4” NPT, 2.5” Long
For 1/4” Tube
Brass, PCTFE
Brass, PCTFE
NP-733T1
NP-732T1C3
Nipple-CS
Nipple-CS
Nipple-CS
For 1/4” Tube
For 5/16” Tube
For 3/8” Tube
SS
Brass
Brass
NP-732C2SS
NP-732C3
NP-732C4
Nipple-CV
Nipple-CV
Nipple-CV
1/4” NPT, 2.5”Long
1/4” NPT, 2.5”Long
1/4” NPT, 2.5”Long
Brass
SS
CP Brass
NP-733CV
NP-733SSCV
MNP-733CV
Nipple-RPV-O-Ring
1/4” NPT, 3.5”Long
with Retractable Pin & O-Ring
Brass, EPDM
NP-735W-RPV
Soft Tip
O-ring
For HT-Nipple
For NP-735W-RPV
PCTFE
EPDM
T733-1
OR-326
Nipple-Threaded Inlets
Nipple-Handtight
Nipple-Countersunk
Nipple-Check Valve
Nipples for use with
Residual Pressure
Valves
Replacement Items
Add “RF” to end of nipple part numbers listed under the CGA numbers for Installed Filters
28
www.superiorprod.com
regulator inlet nuts & nipples
3,000 PSI
CGA-330 Non-Corrosive Gases
Part
Hex Nuts
Nipple-Threaded Inlets
Description
Material
Part No.
Nut
.830”-14NGO-LH-INT
Brass
N-62
Nut
Nut
.830”-14NGO-LH-INT
.830”-14NGO-LH-INT
SS
CP Brass
N-62SS
MN-062
Nipple*
Nipple*
1/4” NPT, 2” Long
1/4” NPT, 2” Long
Brass
SS
NP-161
NP-161SS
Nipple*
1/4” NPT, 2.5” Long
Brass
NP-162
Nipple*
Nipple*
Nipple*
1/4” NPT, 2.5” Long
1/4” NPT, 2.5” Long
1/4” NPT, 3.5” Long
SS
CP Brass
SS
NP-162SS
MNP-162
NP-165SS
Nipple*
For 1/4” Tube
SS
NP-161C2SS
Washer
Washer
Washer
Washer
For Nipple
For Nipple
For Nipple
For Nipple
Fiber
PTFE
ETFE
Nylon
W-6
W-8
MYP-010
MYP-011
Nipple-Countersunk
Replacement Items
*Includes Washer
CGA-346 Air
Part
Hex Nuts
Description
Nut
.830”-14NGO-RH-INT
Nut
Nut
3,000 PSI
Part No.
Material
Brass
N-84
.830”-14NGO-RH-INT
CP Brass
MN-084
.830”-14NGO-RH-INT
SS
N-84SS
Nut-HT
.830”-14NGO-RH INT
Brass
HTN-84
Nut-HT
.830”-14NGO-RH INT
Brass, Plastic Grip
HTN-84P
Nut-HT
.830”-14NGO-RH INT
CP Brass, Plastic Grip MHN-084P
Nipple
Nipple
Nipple
Nipple
Nipple
Nipple
1/4” NPT, 2.5” Long
1/4” NPT, 2.5” Long
1/4” NPT, 2.5” Long
1/4” NPT, 3.5” Long
1/4” NPT, 3.5” Long
1/4” NPT, 3.5” Long
Brass
SS
CP Brass
Brass
SS
CP Brass
Handtight Nuts
Nipple-Threaded Inlets
NP-753
NP-753SS
MNP-753
NP-755
NP-755SS
MNP-755
Add “RF” to end of nipple part numbers listed under the CGA numbers for Installed Filters
Call
for more information or to place an order ‡ZZZVXSHULRUSURGFRP
29
regulator inlet nuts & nipples
CGA-346 Air Continued
3,000 PSI
Part
Description
Material
Part No.
Nipple-HT
Nipple-HT-CS
Nipple-HT-CS
1/4” NPT, 2.5” Long
For 1/4” Tube
For 5/16” Tube
Brass, PCTFE
Brass, PCTFE
Brass, PCTFE
NP-753T1
NP-753T1C2
NP-753T1C3
Nipple-CS
Nipple-CS
Nipple-CS
Nipple-CS
For 1/4” Tube
For 1/4” Tube
For 5/16” Tube
For 3/8” Tube
Brass
SS
Brass
Brass
NP-752C2
NP-752C2SS
NP-752C3
NP-752C4
Nipple-CV
Nipple-CV
Nipple-CV
1/4” NPT, 2.5” Long
1/4” NPT, 2.5” Long
1/4” NPT, 2.5” Long
Brass
SS
CP Brass
NP-753CV
NP-753SSCV
MNP-753CV
Soft Tip
O-Ring
For HT-Nipple
For Quicknut Nipple
PCTFE
Polyurethane
T753-1
OR-346
Nipple-Handtight
Nipple-Countersunk
Nipple-Check Valve
Replacement Items
CGA-347 Air
3,001 - 5,500 PSI
Hex Nuts
Part
Description
Material
Part No.
Nut
.830”-14NGO-RH-INT
Brass
N-85
Nut
.830”-14NGO-RH-INT
SS
N-85SS
Nut
.830”-14NGO-RH-INT
CP Brass
MN-085
Nut-HT
Nut-HT
Nut-HT
.830”-14NGO-RH-INT
.830”-14NGO-RH-INT
.830”-14NGO-RH-INT
Brass
Brass, Plastic Grip
SS, Alum. Grip
HTN-85
HTN-85P
HTN-85SS
Nipple
Nipple
Nipple
1/4” NPT, 3” Long
1/4” NPT, 3” Long
1/4” NPT, 3” Long
Brass
SS
CP Brass
NP-765
NP-765SS
MNP-765
Nipple-HT
Nipple-HT
1/4” NPT, 3” Long w/ O-Ring
1/4” NPT, 3” Long w/ O-Ring
SS, Polyurethane
Brass, Polyurethane
NP-765SSW
NP-765W
Nipple-CS
Nipple-CS
For 1/4” Tube
For 1/4” Tube
Brass
SS
NP-765C2
NP-765C2SS
Nipple-Check Valve
Nipple-CV
1/4” NPT, 3” Long
SS
NP-765SSCV
Replacement Items
O-Ring
For HT- Nipple
Polyurethane
OR-347
Handtight Nuts
Nipple-Threaded Inlets
Nipple-Handtight
Nipple-Countersunk
Add “RF” to end of nipple part numbers listed under the CGA numbers for Installed Filters
30
www.superiorprod.com
regulator inlet nuts & nipples
CGA-350 Hydrogen/Methane/Natural Gas
Hex Nuts
3,000 PSI
Part
Description
Material
Part No.
Nut
.830”-14NGO-LH-INT
Brass
N-64
Nut
.830”-14NGO-LH-INT
SS
N-64SS
Nut
.830”-14NGO-LH-INT
CP Brass
MN-064
Nut-HT
Nut-HT
.830”-14NGO-LH-INT
.830”-14NGO-LH-INT
Brass
Brass, Plastic Grip
HTN-64
HTN-64P
Nipple
Nipple
Nipple
Nipple
Nipple
Nipple
Nipple
Nipple
Nipple
1/4” NPT, 2.125” Long
1/4” NPT, 2.5” Long
1/4” NPT, 2.5” Long
1/4” NPT, 2.5” Long
1/4” NPT, 3” Long
1/4” NPT, 3” Long
1/4” NPT, 3.5” Long
1/4” NPT, 3.5” Long
1/4” NPT, 3.5” Long
Brass
Brass
SS
CP Brass
Brass
CP Brass
Brass
SS
CP Brass
NP-167
NP-168
NP-168SS
MNP-168
NP-169
MNP-169
NP-170
NP-170SS
MNP-170
Nipple-HT
1/4” NPT, 2.5” Long
Brass, PTFE
NP-168T3
Nipple-HT-CS
For 1/4” Tube
Brass, PTFE
NP-168T3C2
Nipple-HT-CS
For 5/16” Tube
Brass, PTFE
NP-168T3C3
Nipple-CS
Nipple-CS
Nipple-CS
Nipple-CS
For 1/4” Tube
For 1/4” Tube
For 5/16” Tube
For 3/8” Tube
Brass
SS
Brass
Brass
NP-168C2
NP-168C2SS
NP-168C3
NP-168C4
Nipple-CV
Nipple-CV
Nipple-CV
1/4” NPT, 2.5” Long
1/4” NPT, 2.5” Long
1/4” NPT, 2.5” Long
Brass
SS
CP Brass
NP-168CV
NP-168SSCV
MNP-168CV
Nipple-RPV
Nipple-RPV
Nipple-RPV
1/4” NPT, 2.5” Long
1/4” NPT, 2.5” Long
1/4” NPT, 3.5” Long
Brass, SS Pin
NP-168-PIN-SS
Brass, Monel Pin
NP-168-PIN-M
Brass, Retractable SS Pin NP-170-RPV
Soft Tip
Pin
Pin
For HT-Nipple
SS Pin for NP-168-PIN-SS
Monel Pin for NP-168-PIN-M
PTFE
SS
Monel
Handtight Nuts
Nipple-Threaded Inlets
Nipple-Handtight
Nipple-Countersunk
Nipple-Check
pple Check Valve
Nipples for use with
Residual Pressure
Valves
Replacement Items
T168-3
PIN-NP-SS
PIN-NP-M
Add “RF” to end of nipple part numbers listed under the CGA numbers for Installed Filters
Call
for more information or to place an order ‡ZZZVXSHULRUSURGFRP
31
regulator inlet nuts & nipples
CGA-410 Canadian Acetylene
Hex Nut
500 PSI
Part
Description
Material
Part No.
Nut
.855”-14NGO-LH-INT
Brass
N-66
Nipple
Nipple
Nipple
1/4” NPT, 2.5” Long
1/4” NPT, 3” Long
1/4” NPT, 3.5” Long
Brass
Brass
Brass
NP-168
NP-169
NP-170
Nipple-Threaded Inlets
CGA-415 Canadian Acetylene
Hex Nut
500 PSI
Part
Description
Material
Part No.
Nut
.855”-14NGO-LH-INT
Brass
N-66
Nipple
1/4” NPT, 2.5” Long
Brass
NP-181
Washer
For Nipple
Fiber
W-50
Nipple-Threaded Inlet
Replacement
Part
l
P
Add “RF” to end of nipple part numbers listed under the CGA numbers for Installed Filters
32
www.superiorprod.com
regulator inlet nuts & nipples
CGA-500 Medical Mixtures
Part
Description
Material
3,000 PSI
Part No.
Nut
.880”-14NGO-RH-EXT
Brass
N-67
Nut
.880”-14NGO-RH-EXT
CP Brass
MN-067
Nut-HT
.880”-14NGO-RH-EXT
Brass, Plastic Grip
HTN-67P
Nut-HT
.880”-14NGO-RH-EXT
CP Brass, Plastic Grip
MHN-067P
Nipple-Threaded Inlets
Nipple
Nipple
Nipple
Nipple
Nipple
Nipple
Nipple
1/4” NPT, 2.5” Long
1/4” NPT, 2.5” Long
1/4” NPT, 3” Long
1/4” NPT, 3” Long
1/4” NPT, 3.5” Long
1/4” NPT, 3.5” Long
1/4” NPT, 4.5” Long
Brass
CP Brass
Brass
CP Brass
Brass
CP Brass
Brass
NP-188
MNP-188
NP-189
MNP-189
NP-190
MNP-190
NP-191
Nipple-Handtight
Nipple-HT
Nipple-HT
Nipple-HT
1/4” NPT, 3.5” Long
1/4” NPT, 3.5” Long w/ O-Ring
1/4” NPT, 3.5” Long w/ O-Ring
Brass, PTFE
Brass, Nitrile
CP Brass, Nitrile
NP-190T3
NP-190W
MNP-190W
Nipple-HT-CS
Nipple-HT-CS
For 1/4” Tube
For 5/16”Tube
Brass, PTFE
Brass, PTFE
NP-188T3C2
NP-188T3C3
Nipple-CS
For 1/4” Tube
Brass
NP-188C2
Nipple-CS
Nipple-CS
For 5/16” Tube
For 3/8” Tube
Brass
Brass
NP-188C3
NP-188C4
Nipple-CV
Nipple-CV
Nipple-CV
1/4” NPT, 2.5” Long
1/4” NPT, 2.5” Long
1/4” NPT, 3” Long
Brass
CP Brass
Brass
NP-188CV
MNP-188CV
NP-189CV
O-Ring
For O-Ring Nipple
Nitrile
OR-580
Soft Tip
For HT-Nipple
PTFE
T189-3
Hex Nuts
Handtight Nuts
Nipple-Countersunk
Nipple-Check Valve
Replacement Parts
Add “RF” to end of nipple part numbers listed under the CGA numbers for Installed Filters
Call
for more information or to place an order ‡ZZZVXSHULRUSURGFRP
33
regulator inlet nuts & nipples
CGA-510 Acetylene/Propane/Natural Gas
Hex Nuts
Handtight Nuts
Nipple-Threaded
Inlets
Nipple-Handtight
Nipple-Countersunk
Nipple-Check Valve
Part
Description
Material
500 PSI
Part No.
Nut
Nut
Nut
Nut
.880”-14NGO-LH-EXT(7/8”Hex)
.880”-14NGO-LH-EXT
.880”-14NGO-LH-EXT
.880”-14NGO-LH-EXT
Brass
Brass
SS
CP Brass
N-68
N-69
N-69SS
MN-069
Nut-HT
Nut-HT
.880”-14NGO-LH-EXT
.880”-14NGO-LH-EXT
Brass
Brass, Plastic Grip
HTN-69
HTN-69P
Nipple
Nipple
Nipple
Nipple
Nipple
Nipple
Nipple
Nipple
Nipple
Nipple
1/4” NPT, 2.5” Long
1/4” NPT, 2.5” Long
1/4” NPT, 2.5” Long
1/4” NPT, 3” Long
1/4” NPT, 3” Long
1/4” NPT, 3” Long
1/4” NPT, 3.5” Long
1/4” NPT, 3.5” Long
1/4” NPT, 3.5” Long
1/4” NPT, 4.5” Long
Brass
CP Brass
SS
Brass
CP Brass
SS
Brass
SS
CP Brass
Brass
NP-188
MNP-188
NP-188SS
NP-189
MNP-189
NP-189SS
NP-190
NP-190SS
MNP-190
NP-191
Nipple-HT
Nipple-HT
Nipple-HT
Nipple-HT-CS
Nipple-HT-CS
1/4” NPT, 3” Long (only with HTN-69)
1/4” NPT, 3.5” Long, w/ soft tip
1/4” NPT, 3.5” Long w/ O-Ring
For 1/4” Tube
For 5/16” Tube
Brass, PTFE
Brass, PTFE
Brass, Nitrile
Brass, PTFE
Brass, PTFE
NP-189T3
NP-190T3
NP-190W
NP-188T3C2
NP-188T3C3
Nipple-CS
Nipple-CS
Nipple-CS
Nipple-CS
Nipple-CS
For 1/4” Tube
For 1/4” Tube
For 5/16” Tube
For 5/16” Tube
For 3/8” Tube
Brass
SS
Brass
SS
Brass
NP-188C2
NP-188C2SS
NP-188C3
NP-188C3SS
NP-188C4
Nipple-CV
Nipple-CV
Nipple-CV
Nipple-CV
Nipple-CV
1/4” NPT, 2.5” Long
1/4” NPT, 2.5” Long
1/4” NPT, 2.5” Long
1/4” NPT, 3” Long
1/4” NPT, 3” Long
Brass
SS
CP Brass
Brass
SS
NP-188CV
NP-188SSCV
MNP-188CV
NP-189CV
NP-189SSCV
Soft Tip
O-Ring
For HT-Nipple
For NP-190W
PTFE
Nitrile
T189-3
OR-580
Replacement Items
Add “RF” to end of nipple part numbers listed under the CGA numbers for Installed Filters
34
www.superiorprod.com
regulator inlet nuts & nipples
CGA-520 “B Size” Acetylene In Small Cylinders
Hex Nuts
500 PSI
Part
Description
Material
Part No.
Nut
.899”-18NGO-RH-INT
Brass
N-70
Nut-HT
.899”-18NGO-RH-INT
Brass, Plastic Grip
HTN-70P
Nipple
1/4” NPT, 1.75” Long
Brass
NP-435
Nipple-HT
1/4” NPT, 1.75” Long w/ O-Ring
Brass, EPDM
NP-435W
Nipple-CS
For 1/4”Tube
Brass
NP-435C2
O-Ring
For HT
EPDM
OR-520Z
Handtight Nuts
Nipple-Threaded Inlets
Nipple-Handtight
Nipple-Countersunk
Replacement Parts
Notes:
Add “RF” to end of nipple part numbers listed under the CGA numbers for Installed Filters
Call
for more information or to place an order ‡ZZZVXSHULRUSURGFRP
35
regulator inlet nuts & nipples
CGA-540 Oxygen
Hex Nuts
3,000 PSI
Part
Description
Material
Part No.
Nut
.908”-14NGO-RH-INT.
Brass
N-71
Nut
.908”-14NGO-RH-INT.
SS
N-71SS
Nut
.908”-14NGO-RH-INT
CP Brass
MN-071
Nut-HT
Nut-HT
Nut-HT
.908”-14NGO-RH-INT
.908”-14NGO-RH-INT
.908”-14NGO-RH-INT
Brass
Brass, Plastic Grip
CP Brass, Plastic Grip
HTN-71
HTN-71P
MHN-071P
Nipple
Nipple
Nipple
Nipple
Nipple
Nipple
Nipple
Nipple
1/4” NPT, 2.06” Long
1/4” NPT, 2.06” Long
1/4” NPT, 2.5” Long
1/4” NPT, 2.5” Long
1/4” NPT, 2.5” Long
1/4” NPT, 3” Long
1/4” NPT, 3” Long
1/4” NPT, 3.5” Long
Brass
CP Brass
Brass
CP Brass
SS
Brass
CP Brass
Brass
NP-210
MNP-210
NP-211
MNP-211
NP-211SS
NP-212
MNP-212
NP-213
Nipple-HT
Nipple-HT
Nipple-HT
Nipple-HT
Nipple-HT
1/4” NPT, 2.5” Long w/ O-Ring
1/4” NPT, 2.5” Long w/ O-Ring
1/4” NPT, 2.5” Long
For 1/4” Tube
For 5/16” Tube
Brass/Viton
CP Brass/Viton
Brass/PCTFE
Brass/PCTFE
Brass/PCTFE
NP-211W
MNP-211W
NP-211T1
NP-211T1C2
NP-211T1C3
Nipple-CS
Nipple-CS
Nipple-CS
Nipple-CS
For 1/4” Tube
For 1/4” Tube
For 5/16” Tube
For 3/8” Tube
Brass
SS
Brass
Brass
NP-210C2
NP-210C2SS
NP-210C3
NP-210C4
Nipple-CV
Nipple-CV
Nipple-CV
1/4” NPT, 2.125” Long
1/4” NPT, 2.125” Long
1/4” NPT, 2.5” Long
Brass
CP Brass
SS
NP-210CV
MNP-210CV
NP-211SSCV
Nipple-RPV
Nipple-RPV
Nipple-RPV
Nipple-RPV
1/4” NPT, 2.5” Long
1/4” NPT, 2.5” Long
1/4” NPT, 2.5” Long w/ O-Ring
1/4” NPT, 3.5” Long w/ O-Ring
Brass (Monel Pin)
Brass (SS Pin)
Brass (Monel Pin)
Brass (Retractable SS Pin)
NP-211-PIN-M
NP-211-PIN-SS
NP-211W-PIN-M
NP-213W-RPV
Soft Tip
O-Ring
O-Ring
Pin
Pin
For HT-Nipple
For Nipple
For O-Ring Nipple
For RPV Nipple
For RPV Nipple
PCTFE
Viton
Viton
SS
Monel
T211-1
OR-540
OR-011V7
PIN-NP-SS
PIN-NP-M
Handtight Nuts
Nipples -Threaded Inlets
Nipples - Handtight
Nipples - Countersunk
Nipple - Check Valve
Nipples - Residual
Pressure Valve
Replacement Items
Add “RF” to end of nipple part numbers listed under the CGA numbers for Installed Filters
36
www.superiorprod.com
regulator inlet nuts & nipples
CGA-555 Propane, Butane For Liquid Withdrawal
3,000 PSI
Part
Description
Material
Part No.
Nut
.908”-14NGO-LH-INT
Brass
N-86
Nut
.908”-14NGO-LH-INT
CP Brass
MN-086
Nut-HT
.908”-14NGO-LH-INT
Brass
HTN-86
Nipple-Threaded Inlets
Nipple
Nipple
Nipple
Nipple
Nipple
Nipple
Nipple
1/4” NPT, 2.06” Long
1/4” NPT, 2.06” Long
1/4” NPT, 2.5” Long
1/4” NPT, 2.5” Long
1/4” NPT, 3” Long
1/4” NPT, 3” Long
1/4” NPT, 3.5” Long
Brass
CP Brass
Brass
CP Brass
Brass
CP Brass
Brass
NP-210
MNP-210
NP-211
MNP-211
NP-212
MNP-212
NP-213
Nipple-Handtight
Nipple-HT
Nipple-HT
Nipple-HT
Nipple-HT-CS
Nipple-HT-CS
1/4” NPT, 2.5” Long w/ o-ring
1/4” NPT, 2.5” Long w/ o-ring
1/4” NPT, 2.5” Long
For 1/4” Tube
For 5/16” Tube
Brass, Viton
CP Brass, Viton
Brass, PCTFE
Brass, PCTFE
Brass, PCTFE
NP-211W
MNP-211W
NP-211T1
NP-210T1C2
NP-210T1C3
Nipple-CS
Nipple-CS
Nipple-CS
For 1/4” Tube
For 5/16”Tube
For 3/8” Tube
Brass
Brass
Brass
NP-210C2
NP-210C3
NP-210C4
Nipple-CV
Nipple-CV
1/4” NPT, 2.125” Long
1/4” NPT, 2.125” Long
Brass
CP Brass
NP-210CV
MNP-210CV
Soft Tip
O-Ring
For Soft Tip-Nipple
For O-Ring-Nipple
PCTFE
Viton
T211-1
OR-011V7
Part
Description
Material
Nut
.965”-14NGO-RH-INT
Brass
N-577
Nipple
1/4” NPT, 3” Long
Brass
NP-823
Hex Nuts
Handtight Nuts
Nipple-Countersunk
pp
Nipple-Check Valve
Replacement Parts
CGA-577 Oxygen
Hex Nuts
3,001 - 4,000 PSI
Part No.
Nipple-Threaded Inlets
Add “RF” to end of nipple part numbers listed under the CGA numbers for Installed Filters
Call
for more information or to place an order ‡ZZZVXSHULRUSURGFRP
37
regulator inlet nuts & nipples
CGA-580 Argon, Helium, Nitrogen
Hex Nuts
3,000 PSI
Part
Description
Material
Part No.
Nut
Nut
Nut
.960”-14NGO-RH-EXT
.960”-14NGO-RH-EXT
.960”-14NGO-RH-EXT
Brass
SS
CP Brass
N-73
N-73SS
MN-073
Nut, HT
Nut, HT
.960”-14NGO-RH-EXT
.960”-14NGO-RH-EXT
Brass
CP Brass, Plastic Grip
HTN-73
MHN-073P
Nut, HT
.960”-14NGO-RH-EXT
Brass, Plastic Grip
HTN-73P
Nipple-Threaded Inlets
Nipple
Nipple
Nipple
Nipple
Nipple
Nipple
Nipple
Nipple
Nipple
Nipple
1/4” NPT, 2.5” Long
1/4” NPT, 2.5” Long
1/4” NPT, 2.5” Long
1/4” NPT, 3” Long
1/4” NPT, 3” Long
1/4” NPT, 3” Long
1/4” NPT, 3.5” Long
1/4” NPT, 3.5” Long
1/4” NPT, 3.5” Long
1/4” NPT, 4.5” Long
Brass
SS
CP Brass
Brass
SS
CP Brass
Brass
SS
CP Brass
Brass
NP-188
NP-188SS
MNP-188
NP-189
NP-189SS
MNP-189
NP-190
NP-190SS
MNP-190
NP-191
Nipple-Handtight
Nipple-HT
Nipple-HT
Nipple-HT
Nipple-HT-CS
Nipple-HT-CS
1/4” NPT, 3” Long
1/4” NPT, 3.5” Long
1/4” NPT, 3.5” Long, w/ o’ ring
For 1/4” Tube
For 5/16” Tube
Brass, PTFE
Brass, PTFE
Brass, Nitrile
Brass, PTFE
Brass, PTFE
NP-189T3
NP-190T3
NP-190W
NP-188T3C2
NP-188T3C3
Nipple-Countersunk
Nipple-CS
Nipple-CS
Nipple-CS
Nipple-CS
Nipple-CS
For 1/4” Tube
For 1/4”Tube
For 5/16” Tube
For 5/16” Tube
For 3/8” Tube
Brass
SS
Brass
SS
Brass
NP-188C2
NP-188C2SS
NP-188C3
NP-188C3SS
NP-188C4
Nipple-CV
Nipple-CV
Nipple-CV
Nipple-CV
Nipple-CV
1/4” NPT, 2.5” Long
1/4” NPT, 2.5” Long
1/4” NPT, 2.5” Long
1/4” NPT, 3” Long
1/4” NPT, 3” Long
Brass
SS
CP Brass
Brass
SS
NP-188CV
NP-188SSCV
MNP-188CV
NP-189CV
NP-189SSCV
Nipple-RPV
Nipple-RPV
Nipple-RPV-O-Ring
1/4” NPT, 3.5” Long
1/4” NPT, 3.5” Long
1/4” NPT, 3.5” Long
Brass, SS PIN
Brass, Monel PIN
Brass, Retractable Pin
NP-190-PIN-SS
NP-190-PIN-M
NP-190W-RPV
Soft Tip
O-Ring
Pin
Pin
For Soft Tip-Nipple
For O-Ring-Nipple
For RPV Nipple
For RPV Nipple
PTFE
Nitrile
SS
Monel
T189-3
OR-580
PIN-NP-SS
PIN-NP-M
Handtight Nuts
Nipple-Check Valve
Nipples - Residual
Pressure Valve
Replacement Parts
Add “RF” to end of nipple part numbers listed under the CGA numbers for Installed Filters
38
www.superiorprod.com
regulator inlet nuts & nipples
CGA-590 6XOIXU+H[DÀXRULGH)RUPHUO\,QGXVWULDO$LU
Hex Nuts
Part
Description
Material
3,000 PSI
Part No.
Nut
.960”-14NGO-LH-EXT
Brass
N-74
Nut
.960”-14NGO-LH-EXT
SS
N-74SS
Nut
.960”-14NGO-LH-EXT
CP Brass
MN-074
Nut-HT
Nut-HT
.960”-14NGO-LH-EXT
.960”-14NGO-LH-EXT
Brass
Brass, Plastic
HTN-74
HTN-74P
Nipple
Nipple
Nipple
Nipple
Nipple
Nipple
Nipple
Nipple
Nipple
Nipple
1/4” NPT, 2.5” Long
1/4” NPT, 2.5” Long
1/4” NPT, 2.5” Long
1/4” NPT, 3” Long
1/4” NPT, 3” Long
1/4” NPT, 3” Long
1/4” NPT, 3.5” Long
1/4” NPT, 3.5” Long
1/4” NPT, 3.5” Long
1/4” NPT, 4.5” Long
Brass
SS
CP Brass
Brass
SS
CP Brass
Brass
CP Brass
SS
Brass
NP-188
NP-188SS
MNP-188
NP-189
NP-189SS
MNP-189
NP-190
MNP-190
NP-190SS
NP-191
Nipple-HT
Nipple-HT
Nipple-HT
Nipple-HT-CS
Nipple-HT-CS
1/4” NPT, 3” Long
1/4” NPT, 3.5” Long
1/4” NPT, 3.5” Long, w/ o’ ring
For 1/4” Tube
For 5/16” Tube
Brass, PTFE
Brass, PTFE
Brass, Nitrile
Brass, PTFE
Brass, PTFE
NP-189T3
NP-190T3
NP-190W
NP-188T3C2
NP-188T3C3
Nipple-CS
Nipple-CS
Nipple-CS
Nipple-CS
Nipple-CS
For 1/4” Tube
For 1/4”Tube
For 5/16” Tube
For 5/16” Tube
For 3/8” Tube
Brass
SS
Brass
SS
Brass
NP-188C2
NP-188C2SS
NP-188C3
NP-188C3SS
NP-188C4
Nipple-CV
Nipple-CV
Nipple-CV
Nipple-CV
Nipple-CV
1/4” NPT, 2.5” Long
1/4” NPT, 2.5” Long
1/4” NPT, 2.5” Long
1/4” NPT, 3” Long
1/4” NPT, 3” Long
Brass
SS
CP Brass
Brass
SS
NP-188CV
NP-188SSCV
MNP-188CV
NP-189CV
NP-189SSCV
Soft Tip
For Soft Tip-Nipple
PTFE
T189-3
O-Ring
For O-Ring-Nipple
Nitrile
OR-580
Nipple - Handtight
Nipple-Threaded Inlets
Nipple-Handtight
Nipple-Countersunk
pp
Nipple-Check Valve
Replacement
ent Parts
CGA-621 Oil Tolerant Nitrogen
Hex Nuts
Part
Description
Material
3,001-5,500 PSI
Part No.
Nut
1.035”-14NGO-LH-INT
Brass
N-621
Nipple
1/4” NPT, 3” Long
Brass
NP-621
Nipple-Threaded Inlets
Add “RF” to end of nipple part numbers listed under the CGA numbers for Installed Filters
Call
for more information or to place an order ‡ZZZVXSHULRUSURGFRP
39
regulator inlet nuts & nipples
CGA-622-320 Carbon Dioxide For Liquid Withdrawal
Hex Nut
500 PSI
Part
Description
Material
Part No.
Nut
1.035”-14NGO-RH-INT
Brass
N-622
Nipple
1/4” NPT, 3” Long
Brass
NP-621
Nipple-Threaded Inlet
/LTXLG&\OLQGHUWR+RVH$GDSWRU
Nipple
1.035”-14NGO-RH-INT to CGA 320 Brass
A-622
CGA-624 Nitrous Oxide For Liquid Withdrawal
Hex Nut
Part
Description
Material
500 PSI
Part No.
Nut
1.035”-14NGO-RH-INT
Brass
N-624
Nipple
1/4” NPT, 3” Long
Brass
NP-624
Nipple-Threaded Inlet
CGA-660 Refrigerant Gases
3,000 PSI
Part
Description
Nut
Nut
Nut
1.035”-14NGO-RH-INT
1.035”-14NGO-RH-INT
1.035”-14NGO-RH-INT
Nipple*
Nipple*
Nipple*
Nipple*
Nipple*
Nipple*
1/4” NPT, 1.75” Long
1/4” NPT, 2.5” Long
1/4” NPT, 2.5” Long
1/4” NPT, 2.5” Long
1/4” NPT, 3” Long
1/4” NPT, 3.5” Long
Brass
Brass
SS
CP Brass
SS
SS
NP-236
NP-238
NP-238SS
MNP-238
NP-239SS
NP-240SS
Nipple-CS*
For 1/4” Tube
SS
NP-236C2SS
Nipple-Check Valve
Nipple-CV
1/4” NPT, 2.5”
SS
NP-238SSCV
Replacement Item
Washer
For Nipple
PTFE
W-18
Hex Nuts
s
Nipple-Threaded Inlets
Material
Part No.
Brass
SS
CP Brass
N-77
N-77SS
MN-077
Nipple-Countersunk
Long
*Includes Washer
Add “RF” to end of nipple part numbers listed under the CGA numbers for Installed Filters
40
www.superiorprod.com
regulator inlet nuts & nipples
CGA-677 Argon/Nitrogen/Helium
Part
Hex Nuts
Nipple-Threaded Inlets
5,501-7,500 PSI
Description
Material
Part No.
Nut
1.035”-14NGO-LH-INT
Brass
N-80
Nut
1.035”-14NGO-LH-INT
SS
N-80SS
Nipple
Nipple
Nipple
Nipple
Nipple
Nipple
Nipple
1/4” NPT, 2.5” Long
1/4” NPT, 2.5” Long
1/4” NPT, 3” Long
1/4” NPT, 3” Long
1/4” NPT, 3.5” Long
3/8” NPT, 3” Long
3/8” NPT, 3” Long
Brass
SS
Brass
SS
SS
Brass
SS
NP-246
NP-246SS
NP-247
NP-247SS
NP-248SS
NP-250
NP-250SS
Nipple-CS
For 1/4” Tube
SS
NP-246C2SS
Part
Description
Material
3,001-5,500 PSI
Part No.
Nut
1.040”-14NGO-RH-EXT
Brass
N-680
Nut
1.040”-14NGO-RH-EXT
SS
N-680SS
Nipple
Nipple
Nipple
Nipple
1/4” NPT, 2.5”
1/4” NPT, 2.5”
1/4” NPT, 3”
1/4” NPT, 3.5”
Brass
SS
Brass
Brass
NP-842
NP-842SS
NP-843
NP-844
Nipple-CS
For 1/4” Tube
Brass
NP-842C2
Nipple-Tube Sockets
CGA-680 Argon/Nitrogen/Helium
Hex Nuts
Nipple-Threaded Inlets
Nipple-Tube Sockets
Add “RF” to end of nipple part numbers listed under the CGA numbers for Installed Filters
Call
for more information or to place an order ‡ZZZVXSHULRUSURGFRP
41
regulator inlet nuts & nipples
CGA-695 Hydrogen/Methane
3,001-5,500 PSI
Part
Hex Nut
Description
Material
Part No.
Nut
1.040”-14NGO-LH-EXT
Brass
N-695
Nipple
Nipple
Nipple
1/4” NPT, 2.5”
1/4” NPT, 3”
1/4” NPT, 3.5”
Brass
Brass
Brass
NP-842
NP-843
NP-844
Nipple-CS
For 1/4” Tube
Brass
NP-842C2
Nipple-Threaded Inlets
Nipple-Countersunk
CGA-701 Oxygen
4,001-5,500 PSI
Part
Hex Nut
Description
Material
Part No.
Nut
1.108”-18NGO-RH-INT
Brass
N-701
Nut
1.108”-18NGO-RH-INT
SS
N-701SS
Nipple
1/4” NPT, 3”
Brass
NP-863
Nipple
1/4” NPT, 3”
SS
NP-863SS
Nipple-Threaded Inlet
CGA-702 Air
5,501-7,500 PSI
Hex Nuts
ts
Part
Description
Material
Part No.
Nut
1.120”-14NGO-RH-EXT
Brass
N-702
Nut
1.120”-14NGO-RH-EXT
CP Brass
MN-702
Nipple
Nipple
Nipple
Nipple
1/4” NPT, 2.5”
1/4” NPT, 3”
1/4” NPT, 3”
1/4” NPT, 3.5”
Brass
Brass
CP Brass
Brass
NP-842
NP-843
MNP-843
NP-844
Nipple-CS
For 1/4” Tube
Brass
NP-842C2
Nipple-Threaded Inlets
Nipple-Countersunk
Add “RF” to end of nipple part numbers listed under the CGA numbers for Installed Filters
42
www.superiorprod.com
pin indexed yokes
CGA-870 Oxygen
CGA-940 CO2/Oxygen Mixture w/ CO2 Over 7%
Inlet
Part No.
Inlet
Part No.
Yoke w/HT grip x CGA 540 male
Yoke w/T-handle x CGA 540 male
Yoke w/HT grip x 1/4” NPT male
Yoke w/T-handle x 1/4” NPT male
Yoke w/HT grip x 1/2” NPT male
Yoke w/T-handle x 1/2” NPT male
Yoke w/S.S. HT grip x 1/4” NPT male
Yoke w/S.S. HT grip x 1/2” NPT male
MFY-870-1H
MFY-870-1
MFY-870-4H
MFY-870-4
MFY-870-8H
MFY-870-8
MFY-870-4H-M
MFY-870-8H-M
Yoke w/HT grip x 1/4” NPT male
Yoke w/T-handle x 1/4” NPT male
Yoke w/HT grip x 1/2” NPT male
Yoke w/T-handle x 1/2” NPT male
MFY-940-4H
MFY-940-4
MFY-940-8H
MFY-940-8
CGA-880 CO2/Oxygen Mixture w/ CO2 Not Over 7%
CGA-950 Medical Air
Inlet
Part No.
Inlet
Part No.
Yoke w/HT grip x 1/4” NPT male
Yoke w/T-handle x 1/4” NPT male
Yoke w/HT grip x 1/2” NPT male
Yoke w/T-handle x 1/2” NPT male
MFY-880-4H
MFY-880-4
MFY-880-8H
MFY-880-8
Yoke w/HT grip x 1/4” NPT male
Yoke w/T-handle x 1/4” NPT male
Yoke w/HT grip x 1/2” NPT male
Yoke w/T-handle x 1/2” NPT male
MFY-950-4H
MFY-950-4
MFY-950-8H
MFY-950-8
CGA-890 Helium/Oxygen Mixture w/ He Not Over 80%
CGA-960 Nitrogen
Inlet
Part No.
Inlet
Part No.
Yoke w/HT grip x 1/4” NPT male
Yoke w/T-handle x 1/4” NPT male
Yoke w/HT grip x 1/2” NPT male
Yoke w/T-handle x 1/2” NPT male
MFY-890-4H
MFY-890-4
MFY-890-8H
MFY-890-8
Yoke w/HT grip x 1/4” NPT male
Yoke w/T-handle x 1/4” NPT male
Yoke w/HT grip x 1/2” NPT male
Yoke w/T-handle x 1/2” NPT male
MFY-960-4H
MFY-960-4
MFY-960-8H
MFY-960-8
CGA-910 Nitrous Oxide
CGA-973 Medical Gas Mixtures
Inlet
Part No.
Inlet
Part No.
Yoke w/HT grip x 1/4” NPT male
Yoke w/T-handle x 1/4” NPT male
Yoke w/HT grip x 1/2” NPT male
Yoke w/T-handle x 1/2” NPT male
MFY-910-4H
MFY-910-4
MFY-910-8H
MFY-910-8
Yoke w/HT grip x 1/4” NPT male
Yoke w/T-handle x 1/4” NPT male
Yoke w/HT grip x 1/2” NPT male
Yoke w/T-handle x 1/2” NPT male
MFY-973-4H
MFY-973-4
MFY-973-8H
MFY-973-8
Replacement Parts for all Yokes
Part No.
CGA-930 Helium/Oxygen Mixture w/ He Over 80%
Inlet
Part No.
Yoke w/HT grip x 1/4” NPT male
Yoke w/T-handle x 1/4” NPT male
Yoke w/HT grip x 1/2” NPT male
Yoke w/T-handle x 1/2” NPT male
MFY-930-4H
MFY-930-4
MFY-930-8H
MFY-930-8
Call
T-handle
MYP-001
Handtight handle
MYP-002
Inlet bushing 1/4” NPT male
MYP-004
Inlet bushing 1/2” NPT male
MYP-008
ETFE washer
MYP-010
Nylon washer
MYP-011
FKM washer
MYP-012
6LQWHUHGLQOHW¿OWHU
MYP-015
Stainless steel pin
MYP-020
%XVKLQJ&*$RXWOHWPDOHZ¿OWHUMYP-540
S.S. Replacement Hand tight handle
MYP-002Z
for more information or to place an order ‡ZZZVXSHULRUSURGFRP
43
CGA manifold coupler tees
Oxygen
CGA-540
Nut
CGA-540 Outlet
C
CGA-540
MC-540
CGA-540
C-2540CV
C-2580
C
2580
C-2580SS
Brass
CGA No.
296 Industrial Oxygen Mixtures
300 (Ethyl Chloride)
320 (Carbon Dioxide)
326 (Nitrous Oxide)
346 (Air)
347 (Air)
350 (Hydrogen/Methane/Natural Gas)
510 (Acetylene/Methane/Propane)
540 (Oxygen)
555 (Butane/Propane-Liquid Withdrawal)
577 (Oxygen)
580 (Inert Gases)
6XOIXU+H[DÀXRULGH
660 (Refrigerant Gases)
677 (Inert Gases)
680 (Inert Gases)
695 (Flammables)
701 (Oxygen)
702 (Air)
Swivel Connection
.803”-14NGO-RH-EXT
.830”-14NGO-RH-INT
.830”-14NGO-RH-INT
.830”-14NGO-RH-INT
.830”-14NGO-RH-INT
.830”-14NGO-RH-INT
.830”-14NGO-LH-INT
.880”-14NGO-LH-EXT
.908”-14NGO-RH-INT
.908”-14NGO-LH-INT
.965”-14NGO-RH-INT
.960”-14NGO-RH-EXT
´1*2/+(;7
1.035”-14NGO-RH-INT
1.035”-14NGO-LH-INT
1.040”-14NGO-RH-EXT
1.040”-14NGO-LH-EXT
1.108”-14NGO-RH-EXT
1.120”-14NGO-RH-EXT
End Connection
.803”-14NGO-RH-INT (2)
.830”-14NGO-RH-EXT (2)
.830”-14NGO-RH-EXT (2)
.830”-14NGO-RH-EXT (2)
.830”-14NGO-RH-EXT (2)
.830”-14NGO-RH-EXT (2)
.830”-14NGO-LH-EXT (2)
.880”-14NGO-LH-INT (2)
.908”-14NGO-RH-EXT (2)
.908”-14NGO-LH-EXT (2)
.965”-14NGO-RH-EXT (2)
.960”-14NGO-RH-INT (2)
´1*2/+,17
1.035”-14NGO-RH-EXT (2)
1.035”-14NGO-LH-EXT (2)
1.040”-14NGO-RH-INT (2)
1.040”-14NGO-LH-INT (2)
1.108”-14NGO-RH-INT (2)
1.120”-14NGO-RH-INT (2)
PSI
Part No.
3000
500
3000
3000
3000
5500
3000
500
3000
3000
4000
3000
3000
7500
5500
5500
5500
7500
C-2296*
C-2300*
C-2320*
C-2326*
C-2346*
C-2347
C-2350*
C-2510*
C-2540*
C-2555
C-2577
C-2580*
C-2590*
C-2660
C-2677
C-2680
C-2695
C-2701
C-2702
PSI
Part No.
3000
3000
3000
3000
3000
3000
MC-320
MC-326
MC-346
MC-500
MC-540
MC-580
Chrome Plated Brass
CGA No.
320 (Carbon Dioxide)
326 (Nitrous Oxide)
346 (Air)
500 (Medical Mixture)
540 (Oxygen)
580 (Nitrogen/Helium)
Swivel Connection
.830”-14NGO-RH-INT
.830”-14NGO-RH-INT
.830”-14NGO-RH-INT
.880”-14NGO-RH-EXT
.908”-14NGO-RH-INT
.960”-14NGO-RH-EXT
End Connection
.830”-14NGO-RH-EXT (2)
.830”-14NGO-RH-EXT (2)
.830”-14NGO-RH-EXT (2)
.880”-14NGO-RH-INT (2)
.908”-14NGO-RH-EXT (2)
.960”-14NGO-RH-INT (2)
Stainless Steel
CGA No.
320 (Carbon Dioxide)
346 (Air)
347 (Air)
350 (Hydrogen)
540 (Oxygen)
580 (Inert Gases)
677 (Inert Gases)
Swivel Connection
.830”-14NGO-RH-INT
.830”-14NGO-RH-INT
.830”-14NGO-RH-INT
.830”-14NGO-LH-INT
.908”-14NGO-RH-INT
.960”-14NGO-RH-EXT
1.035”-14NGO-LH-INT
End Connection
.830”-14NGO-RH-EXT (2)
.830”-14NGO-RH-EXT (2)
.830”-14NGO-RH-EXT (2)
.830”-14NGO-LH-EXT (2)
.908”-14NGO-RH-EXT (2)
.960”-14NGO-RH-INT (2)
1.035”-14NGO-LH-EXT (2)
*Available with check valve nipple: Add CV to the end of part number.
44
www.superiorprod.com
PSI
Part No.
3000
3000
5500
3000
3000
3000
7500
C-2320SS
C-2346SS
C-2347SS
C-2350SS
C-2540SS
C-2580SS
C-2677SS
coupler tees & manifold blocks
CGA-540
Nut
CGA-580
Port
C
CGA-540
Outlets
O
C-3580
C-4540
CGA-580 Port
CGA-580 Port
Brass Manifold Coupler Tees - 4 way CGA Valve Outlets, Nut & Nipple Inlet
CGA No.
Swivel Connection
320 (Carbon Dioxide)
346 (Air)
510 (Acetylene/Propane)
540 (Oxygen)
580 (Argon/Helium/Nitrogen)
6XOIXU+H[DÀXRULGH .830”-14NGO-RH-INT
.830”-14NGO-RH-INT
.880”-14NGO-LH-EXT
.908”-14NGO-RH-INT
.960”-14NGO-RH-EXT
´1*2/+(;7
End Connections
PSI
Part No.
.830”-14NGO-RH-EXT (3)
3000
C-4320*
.830”-14NGO-RH-EXT (3)
3000
C-4346*
.880”-14NGO-LH-INT (3)
500
C-4510*
.908”-14NGO-RH-EXT (3)
3000
C-4540*
.960”-14NGO-RH-INT (3)
3000
C-4580*
´1*2/+,17 C-4590*
Brass Manifold Coupler Tees - 3 way CGA Valve Outlets
CGA No.
540 (Oxygen)
580 (Argon/Helium/Nitrogen)
End Connections
PSI
Part No.
.830”-14NGO-RH-EXT (3)
.960”-14NGO-RH-INT (3)
3000
3000
C-3540
C-3580
*Available w/ Check Valve:
Add “CV” to end of part number
2” Hex Brass Body (with 6 valve outlets)
Brass/Stainless Steel Manifold Blocks & Assemblies
CGA No.
Swivel Connection
End Connection
Part No.
540 (Oxygen)
.908”-14NGO-RH-INT
.908”-14NGO-RH-EXT (6)
MB-540-7*
580 (Argon/Helium/Nitrogen)
.960”-14NGO-RH-EXT
.960”-14NGO-RH-INT (6)
MB-580-7*
2” Hex Manifold Blocks (with Female Ports)
Connection
Material
1/4” FNPT (6)
1/4” FNPT (6)
1/4” FNPT (7)
1/4” FNPT (7)
1/4” FNPT(6) x 1/2”FNPT(2)
Brass
SS
Brass
SS
Brass
MB-7
PSI
Part No.
3000
6000
3000
6000
4500
MB-6
MB-6SS
MB-7
MB-7SS
GMA-SCMB
GMA-SCMB
MB-6SS
Call
for more information or to place an order ‡ZZZVXSHULRUSURGFRP
45
brass “y” connectors
EZ-YV50
ERGONOMIC DESIGN
EZ-YV51
YV-50
YV-420
“Y” Connectors With Shut-Off Valves
200 PSI
Service
Inlets
Outlets
Part No.
Oxygen
Fuel Gas
Oxygen
Fuel Gas
Argon
Air-Water
“B” 9/16”-18-RH-INT Swivel Nut
“B” 9/16”-18-LH-INT Swivel Nut
“B” 9/16”-18-RH-INT Swivel Nut
“B” 9/16”-18-LH-INT Swivel Nut
“B” 5/8”-18-RH-EXT Swivel Nut
“B” 5/8”-18-LH-EXT Swivel Nut
“B” 9/16”-18-RH-EXT
“B” 9/16”-18-LH-EXT
“B” 9/16”-18-RH-EXT (P.O.P.)
“B” 9/16”-18-LH-EXT (P.O.P.)
“B” 5/8”-RH-INT
“B” 5/8”-LH-INT
YV-50
YV-51
EZ-YV50
EZ-YV51
YV-420
YV-421
Y-80
Y-420
“Y” Connectors Without Shut-Off Valves
Service
Inlets
Oxygen
Oxygen
Fuel Gas
Fuel Gas
Argon
“B” 9/16”-18-RH-INT Swivel Nut
“B” 9/16”-18-RH-INT Swivel Nut
“B” 9/16”-18-LH-INT Swivel Nut
“B” 9/16”-18-LH-INT Swivel Nut
5/8”-18-RH-EXT Swivel Nut
Air-Water
5/8”-18-LH-EXT Swivel Nut
200 PSI
Outlets
Part No.
“B” 9/16”-18-RH-EXT
1/4” FNPT
“B” 9/16”-18-LH-EXT
1/4” FNPT
“B” 5/8”-18-RH-INT
Y-50
Y-80
Y-51
Y-81
Y-420
“B” 5/8”-18-LH-INT
Y-421
Y-224
“Y” Connectors With Pipe Threads
Service
46
Inlets
3,000 PSI
Outlets
Part No.
Non-Corrosive Gases 1/8” FNPT
1/4” FNPT
Y-184
Non-Corrosive Gases 1/4” MNPT
1/4” FNPT
Y-224
www.superiorprod.com
brass shut-off valves & dust caps
Brass Seat Shut-Off Valves
200 PSI
Service
V-88
V-335
Inlet
Outlet
Part No.
Oxygen
Oxygen
Oxygen
Oxygen
Fuel Gas
Fuel Gas
Fuel Gas
Fuel Gas
Fuel Gas
Fuel Gas
Fuel Gas
Argon
Argon
“B” 9/16”-18-RH-EXT
“B”” 9/16”-18-RH-INT Swivel Nut
“B” 9/16”-18-RH-EXT
1/4” MNPT
1/4” NPT-M
“A” 3/8”-24-LH-EXT
“B” 9/16”-18-LH-EXT
“B” 9/16”-18-LH-INT Swivel Nut
“B” 9/16”-18-LH-EXT
“B” 9/16”-18-LH-EXT
“B” 9/16”-18-LH-EXT
5/8” -18-RH-EXT Swivel Nut “B”
1/4” NPT-M
“B” 9/16”-18-RH-EXT
“B” 9/16”-18-RH-EXT
1/4” MNPT
“B” 9/16”-18-RH-EXT
“B” 9/16”-18LH-EXT
1/8” NPT-Male
“B” 9/16”-18-LH-EXT
“B” 9/16”-18-LH-EXT
1/8” MNPT
1/4” MNPT
1/4” FNPT
5/8” -18-RH-INT “B”
5/8” -18-RH-INT“B”
V-50
V-52
V-76
V-88
V-89
V-25
V-51
V-53
V-69
V-77
V-81
V-420
V-454
All Gases
All Gases
All Gases
All Gases
All Gases
1/8” MNPT
1/4” FNPT
1/4” MNPT
1/4” FNPT
1/4” MNPT
1/8” MNPT
1/4” FNPT
1/4” MNPT
1/4” MNPT
1/4” FNPT
3000 PSI
V-301
V-332
V-333
V-334
V-335
Connection
Part No.
“B”9/16” -18-RH-INT
“B”9/16” -18-LH-INT
“C”7/8”-14-RH-INT
“C”7/8”-14-LH-INT
.830”-14NGO-RH-INT
.830”-14NGO-RH-INT
.830”-14NGO-RH-INT
.830”-14NGO-LH-INT
.880”-14NGO-RH-EXT
.880”-14NGO-LH-EXT
.908”-14NGO-RH-INT
´1*2/+,17
.960”-14NGO-RH-EXT
1.035”-14NGO-RH-INT
CC-8020
CC-8021
CC-8034
CC-8035
CC-8300
CC-8320
CC-8346
CC-8350
CC-8500
CC-8510
CC-8540
CC-8555
CC-8580
CC-8660
Dust Cap & Chain Assemblies (Non-Gas Tight)
CGA No.
Dust caps are one-piece blind nuts
used to protect threads and keep some
contamination from cylinder valves.
&*$WKUHDGVSHFL¿FDWLRQVDUHXVHG
but they do not make a gas tight seal.
CC-8540
Oxygen
Call
Gases
022
Oxygen Std.
023
Fuel Gas Std.
024
Oxygen
025
Fuel Gas
300
Ethyl Chloride Acetylene
320
Carbon Dioxide
346
Air
350
Hydrogen/Methane
500
Medical Mixture
510
Acetylene/Propane
540
Oxygen
3URSDQH/LTXLG:LWKGUDZDO
580
Argon, Helium, Nitrogen
660
Refrigeration Gases
for more information or to place an order ‡ZZZVXSHULRUSURGFRP
47
brass plugs & plug & chain assemblies
Two-Piece Assemblies
These two-piece nut and blind
nipple assemblies are made to CGA
standards and make a gas tight seal.
PC-4540
PC-4510
CGA No.
022
023
024
025
026
027
032
033
032
034
326
347
350
510
520
540
555
580
680
Gases
Connection
Gas Seal (PSI)
Oxygen
“B”9/16 -18-RH-INT
Fuel Gas
“B”9/16 -18-LH-INT
Oxygen
“C”7/8”-14-RH-INT
Fuel Gas
“C”7/8”-14-LH-INT
Oxygen
“D”1-1/4”-12-RH-INT
Fuel Gas
“D”1-1/4”-12-LH-INT
Inert Gas
“B”5/8”-18-RH-EXT
Air-Water
“B”5/8”-18-LH-EXT
Inert Gas
“B”5/8”-18-RH-INT
Inert Gas
“C”7/8”-14-RH-EXT
Nitrous Oxide
.830”-14NGO-RH-INT
Air
.830”-14NGO-RH-INT
Hydrogen/Methane .830”-14NGO-LH-INT
Acetylene/Propane .880”-14NGO-LH-EXT
Acetylene
.899”-18NGO-RH-INT
Oxygen
.908”-14NGO-RH-INT
Propane
.908”-14NGO-LH-INT
Argon/Helium/Nitrogen .960”-14NGO-RH-EXT
Argon/Helium/Nitrogen 1.040”-14NGO-RH-EXT
200
200
200
200
200
200
200
200
200
200
3000
5500
3000
500
500
3000
3000
3000
5500
Part No.
PC-4020
PC-4021
PC-4034
PC-4035
PC-4042
PC-4043
PC-4024
PC-4025
PC-4026
PC-4036
PC-4326
PC-4347
PC-4350
PC-4510
PC-4520
PC-4540
PC-4555
PC-4580
PC-4680
One-Piece Assemblies - With Chain
These shorter one-piece plug and chains
can be used, where space is limited, to
seal off cylinder valves and still be able
to install the cylinder valve cap. The part
makes a gas tight seal. Nipples have
replaceable soft tips or o-rings.
PC-580
Argon, Helium,
Nitrogen
CGA No.
Gases
Connection
320
Carbon Dioxide
.830”-14NGO-RH-INT
326
Nitrous Oxide
.830”-14NGO-RH-INT
330
Non-Corrosive Gas
.830”-14NGO-LH-INT
346
Air
.830”-14NGO-RH-INT
350
Hydrogen/Methane
.830”-14NGO-RH-INT
510
Acetylene/Propane
.880”-14NGO-LH-EXT
540
Oxygen
.908”-14NGO-LH-INT
555
Propane
.908”-14NGO-LH-INT
580
Argon/Helium/Nitrogen
.960”-14NGO-RH-EXT
6XOIXU+H[DÀXRULGH,QG$LU.960”-14NGO-LH-EXT
Gas Seal(PSI)
500
3000
3000
3000
3000
500
3000
3000
3000
3000
Part No.
PC-320
PC-326
PC-330
PC-346
PC-350
PC-510
PC-540
PC-555
PC-580
PC-590
PC-540
Oxygen
One-Piece Assemblies - Without Chain
These shorter one-piece plugs (sold
without chains) can be used, where
space is limited, to seal off cylinder
valves and still be able to install the
cylinder valve cap. The part makes a
gas tight seal. Nipples have replaceable
soft tips or o-rings.
P-580
Argon, Helium,
Nitrogen
P-540
Oxygen
48
CGA No.
022
023
024
025
026
027
032
032
033
034
200
300
320
326
330
346
350
510
540
555
580
590
Gases
Connection
Oxygen
Fuel Gas
Oxygen
Fuel Gas
Oxygen
Fuel Gas
Inert
Inert
Industrial Air
Inert
Acetylene “MC”
Acetylene
Carbon Dioxide
Nitrous Oxide
Non-Corrosive Gas
Air
Hydrogen/Methane
Acetylene/Propane
Oxygen
Propane
Argon/Helium/Nitrogen
6XOIXU+H[DÀXRULGH,QG$LU
9/16”-18RH-INT
9/16”-18LH-INT
7/8”-14RH-INT
7/8”-14LH-INT
1.25”-12RH-INT
1.25”-12LH-INT
5/8”-18RH-EXT
5/8”-18RH-INT
5/8”-18LH-EXT
7/8”-14RH-EXT
.625”-20RH-INT
.830”-14NGO-RH-INT
.830”-14NGO-RH-INT
.830”-14NGO-RH-INT
.830”-14NGO-LH-INT
.830”-14NGO-RH-INT
.830”-14NGO-RH-INT
.880”-14NGO-LH-EXT
.908”-14NGO-LH-INT
.908”-14NGO-LH-INT
.960”-14NGO-RH-EXT
.960”-14NGO-LH-EXT
www.superiorprod.com
Gas Seal(PSI) Part No.
200
200
200
200
200
200
200
200
200
200
500
500
500
3000
3000
3000
3000
500
3000
3000
3000
3000
P-022
P-023
P-024
P-025
P-026
P-027
P-032
P-032INT
P-033
P-034
P-200
P-300
P-320
P-326
P-330
P-346
P-350
P-510
P-540
P-555
P-580
P-590
valve outlet adaptors
CGA No.
Male NPT
Valve Outlet Adaptors
Male & Female Pipe Threads
Material
PSI
Part No.
Gas
Connection x NPT
Non-Corrosive
.620”-18UNF-2B-RH-EXT x 1/4 MNPT Brass
3,000
A-518
180
Non-Corrosive
.620”-18UNF-2B-RH-EXT x 1/4 MNPT S.S.
3,000
A-518SS
296
Industrial Oxygen Mixtures
.803” UNS-2B-RH-INT x 1/4 FNPT
Brass
3,000
N-853A
300
Ethyl Chloride (formerly Acetylene)
.825” 14NGO-RH-EXT x 1/4 MNPT
Brass
500
A-531
300
Ethyl Chloride (formerly Acetylene)
.825” 14NGO-RH-EXT x 1/2 MNPT
Brass
500
A-533
320
Carbon Dioxide
.825” 14NGO-RH-EXT x 1/4 MNPT
Brass
3,000
A-541
320
Carbon Dioxide
.825” 14NGO-RH-EXT x 3/8 MNPT
Brass
3,000
A-542
320
Carbon Dioxide
.825” 14NGO-RH-EXT x 1/2 MNPT
Brass
3,000
A-543
320
Carbon Dioxide w/ Check Valve
.825” 14NGO-RH-EXT x 1/2 MNPT
Brass
3,000
A-543CV
320
Carbon Dioxide
.825” 14NGO-RH-EXT x 1/4 MNPT
Brass
3,000
N-854A
330
&DUERQ6XO¿GH
.825” 14NGO-LH-EXT x 1/4 FNPT
Brass
3,000
N-330A
326
Nitrous Oxide
.825” 14NGO-RH-EXT x 1/4 MNPT
Brass
3,000
A-631
326
Nitrous Oxide
.825” 14NGO-RH-EXT x 1/4 MNPT
CP Brass
3,000
MA-631
326
Nitrous Oxide
.825” 14NGO-RH-EXT x 3/8 MNPT
Brass
3,000
A-632
326
Nitrous Oxide w/ Check Valve
.825” 14NGO-RH-EXT x 3/8 MNPT
Brass
3,000
A-632CV
326
Nitrous Oxide
.825” 14NGO-RH-EXT x 1/2 MNPT
Brass
3,000
A-633
326
Nitrous Oxide w/ Check Valve
.825” 14NGO-RH-EXT x 1/2 MNPT
Brass
3,000
A-633CV
326
Nitrous Oxide
.825” 14NGO-RH-EXT x 1/4 FNPT
Brass
3,000
N-811A
326
Nitrous Oxide
.825” 14NGO-RH-EXT x 1/4 FNPT
CP Brass
3,000
MN-326A
346
Air
.825” 14NGO-RH-EXT x 1/4 MNPT
Brass
3,000
A-641
346
Air
.825” 14NGO-RH-EXT x 1/4 MNPT
CP Brass
3,000
MA-641
346
Air
.825” 14NGO-RH-EXT x 1/4 MNPT
S.S.
3,000
A-641SS
346
Air w/ Check Valve
.825” 14NGO-RH-EXT x 3/8 MNPT
Brass
3,000
A-642CV
346
Air
.825” 14NGO-RH-EXT x 1/2 MNPT
Brass
3,000
A-643
346
Air w/ Check Valve
.825” 14NGO-RH-EXT x 1/2 MNPT
Brass
3,000
A-643CV
346
Air
.825” 14NGO-RH-EXT x 1/4 FNPT
Brass
3,000
N-866A
346
Air
.825” 14NGO-RH-EXT x 1/4 FNPT
S.S.
3,000
N-866A-SS
346
Air
.825” 14NGO-RH-EXT x 1/4 FNPT
CP Brass
3,000
MN-346A
347
Air
.825” 14NGO-RH-EXT x 1/4 MNPT
Brass
5,500
A-661
347
Air
.825” 14NGO-RH-EXT x 1/4 MNPT
S.S.
5,500
A-661SS
347
Air
.825” 14NGO-RH-EXT x 1/2 MNPT
Brass
5,500
A-663
180
Female NPT
Male NPT
Male NPT
Female NPT
Male NPT
Female NPT
Male NPT
Female NPT
Male NPT
(347 continue next page)
Call
for more information or to place an order ‡ZZZVXSHULRUSURGFRP
49
valve outlet adaptors
CGA No.
Valve Outlet Adaptors Male & Female Pipe Threads
Gas
Material
PSI
Part No.
Connection x NPT
Female NPT
Male NPT
Female NPT
347
Air
.825” 14NGO-RH-EXT x 1/4 FNPT
Brass
5,500
N-347A
347
Air
.825” 14NGO-RH-EXT x 1/4 FNPT
S.S.
5,500
N-347A-SS
350
Hydrogen/Methane/Natural Gas .825” 14NGO-LH-EXT x 1/4 MNPT
Brass
3,000
A-551
350
Hydrogen/Methane/Natural Gas .825” 14NGO-LH-EXT x 1/2 MNPT
Brass
3,000
A-553
350
Hydrogen/Methane/Natural Gas .825” 14NGO-LH-EXT x 1/4 FNPT
Brass
3,000
N-874A
350
Hydrogen/Methane/Natural Gas .825” 14NGO-LH-EXT x 1/4 FNPT
S.S.
3,000
N-874A-SS
350
Hydrogen/Methane/Natural Gas .825” 14NGO-LH-EXT x 1/4 FNPT
CP Brass
3,000
MN-350A
410
Canadian Acetylene
.850” 14NGO-LH-EXT x 1/4 FNPT
Brass
500
N-836A
500
Medical Mixtures
.885” 14NGO-RH-INT x 1/4 MNPT
Brass
3,000
A-571
500
Medical Mixtures w/ Check Valve
.885” 14NGO-RH-INT x 3/8 MNPT
Brass
3,000
A-572CV
500
Medical Mixtures w/ Check Valve
.885” 14NGO-RH-INT x 1/2 MNPT
Brass
3,000
A-573CV
500
Medical Mixtures
.885” 14NGO-RH-INT x 1/4 FNPT
Brass
3,000
N-807A
500
Medical Mixtures
.885” 14NGO-RH-INT x 1/4 FNPT
CP Brass
3,000
MN-500A
510
Acetylene/Propane/Natural Gas .885” 14NGO-LH-INT x 1/4 MNPT
Brass
500
A-581
510
Acetylene/Propane/Natural Gas .885” 14NGO-LH-INT x 1/2 MNPT
Brass
500
A-583
510
Acetylene/Propane/Natural Gas .885” 14NGO-LH-INT x 1/4 FNPT
Brass
500
N-800A
510
Acetylene/Propane/Natural Gas .885” 14NGO-LH-INT x 1/4 FNPT
CP Brass
500
MN-510A
Brass
500
N-802A
Female NPT
Male
M
l NPT
Female NPT
Male NPT
Female NPT
N-802A
510-90 Acetylene/Propane/Natural Gas .885” 14NGO-LH-INT x 1/4 FNPT
Male NPT
540
Oxygen
.903” 14NGO-RH-EXT x 1/4 MNPT
Brass
3,000
A-591
540
Oxygen
.903” 14NGO-RH-EXT x 1/4 MNPT
S.S.
3,000
A-591SS
540
Oxygen
.903” 14NGO-RH-EXT x 3/8 MNPT
Brass
3,000
A-592
540
Oxygen w/ Check Valve
.903” 14NGO-RH-EXT x 3/8 MNPT
Brass
3,000
A-592CV
540
Oxygen
.903” 14NGO-RH-EXT x 1/2 MNPT
Brass
3,000
A-593
540
Oxygen w/ Check Valve
.903” 14NGO-RH-EXT x 1/2 MNPT
Brass
3,000
A-593CV
540
Oxygen
.903” 14NGO-RH-EXT x 1/4 FNPT
Brass
3,000
N-876A
540
Oxygen
.903” 14NGO-RH-EXT x 1/4 FNPT
S.S.
3,000
N-876A-SS
540
Oxygen
.903” 14NGO-RH-EXT x 1/4 FNPT
CP Brass
3,000
MN-540A
555
Propane/Butane IRU/LTXLG:LWKGUDZDO .903” 14NGO-LH-EXT x 1/4 MNPT
Brass
3,000
A-651
555
Propane/Butane IRU/LTXLG:LWKGUDZDO .903” 14NGO-LH-EXT x 1/2 MNPT
Brass
3,000
A-653
555
Propane/Butane IRU/LTXLG:LWKGUDZDO .903” 14NGO-LH-EXT x 1/4 FNPT
Brass
3,000
N-885A
577
Oxygen
.960” 14NGO-RH-EXT x 1/2 MNPT
Brass
4,000
A-563
577
Oxygen
.960” 14NGO-RH-EXT x 1/4 FNPT
Brass
4,000
N-577A
Female NPT
Male NPT
Female NPT
Male NPT
Female NPT
50
www.superiorprod.com
valve outlet adaptors
CGA No.
Valve Outlet Adaptors Male & Female Pipe Threads
Gas
Male NPT
Material PSI
Part No.
Connection x NPT
580
Argon/Helium/Nitrogen
.965” 14NGO-RH-INT x 1/4 MNPT
Brass
3,000
A-601
580
Argon/Helium/Nitrogen
.965” 14NGO-RH-INT x 3/8 MNPT
Brass
3,000
A-602
Argon/Helium/Nitrogen w/ Check Valve .965” 14NGO-RH-INT x 3/8 MNPT
Argon/Helium/Nitrogen
.965” 14NGO-RH-INT x 1/2 MNPT
Brass
3,000
A-602CV
Brass
3,000
A-603
3,000
A-603CV
580
Argon/Helium/Nitrogen w/ Check Valve .965” 14NGO-RH-INT x 1/2 MNPT
Argon/Helium/Nitrogen
.965” 14NGO-RH-INT x 3/4 MNPT
Brass
Brass
3,000
A-605
580
Argon/Helium/Nitrogen
.965” 14NGO-RH-INT x 1/4 FNPT
Brass
3,000
N-862A
580
580
580
Female NPT
580
Argon/Helium/Nitrogen
.965” 14NGO-RH-INT x 1/4 FNPT
S.S.
3,000
N-862ASS
580
Argon/Helium/Nitrogen
.965” 14NGO-RH-INT x 1/4 FNPT
CP Brass
3,000
MN-580A
590
6XOIXU+H[DÀXRULGH,QGXVWULDO$LU
.965” 14NGO-LH-INT x 1/4 MNPT
Brass
3,000
A-611
590
6XOIXU+H[DÀXRULGH,QGXVWULDO$LU
.965” 14NGO-LH-INT x 1/4 FNPT
Brass
3,000
N-954A
590
6XOIXU+H[DÀXRULGH,QGXVWULDO$LU
.965” 14NGO-LH-INT x 1/4 FNPT
CP Brass
3,000
MN-590A
622
Carbon Dioxide /LTXLG:LWKGUDZDO
1.030” 14NGO-RH-EXT x 3/8 MNPT
Brass
500
A-722
624
Nitrous Oxide /LTXLG:LWKGUDZDO
1.030” 14NGO-RH-EXT x 3/8 MNPT
Brass
500
A-732
660
Refrigerant Gases
1.030” 14NGO-RH-EXT x 1/4 FNPT
Brass
3,000
N-880A
660
Refrigerant Gases
1.030” 14NGO-RH-EXT x 1/4 FNPT
CP Brass
3,000
MN-660A
677
Argon/Helium/Nitrogen
1.030” 14NGO-LH-EXT x 1/4 MNPT
Brass
7,500
A-671
Male NPT
Female NPT
Male NPT
Male NPT
Female NPT
Male NPT
677
Argon/Helium/Nitrogen
1.030” 14NGO-LH-EXT x 1/4 MNPT
S.S.
7,500
A-671SS
677
Argon/Helium/Nitrogen
1.030” 14NGO-LH-EXT x 1/2 MNPT
Brass
7,500
A-673
7,500
A-673SS
677
Argon/Helium/Nitrogen
1.030” 14NGO-LH-EXT x 1/2 MNPT
S.S.
677
Argon/Helium/Nitrogen
1.030” 14NGO-LH-EXT x 1/4 FNPT
Brass
7,500
N-677A
677
Argon/Helium/Nitrogen
1.030” 14NGO-LH-EXT x 1/4 FNPT
S.S.
7,500
N-677A-SS
680
Argon/Helium/Nitrogen
1.045” 14NGO-RH-INT x 1/4 MNPT
Brass
5,500
A-681
5,500
A-683
Female NPT
Male
M
l NPT
680
Argon/Helium/Nitrogen
1.045” 14NGO-RH-INT x 1/2 MNPT
Brass
680
Argon/Helium/Nitrogen
1.045” 14NGO-RH-INT x 1/4 FNPT
Brass
5,500
N-680A
701
Oxygen
1.103” 18NGO-RH-EXT x 1/2 MNPT
Brass
5,500
A-753
701
Oxygen
1.103” 18NGO-RH-EXT x 1/4 FNPT
Brass
5,500
N-701A
702
Air
1.125” 14NGO-RH-INT x 1/2 MNPT
Brass
7,500
A-763
702
Air
1.125” 14NGO-RH-INT x 1/4 FNPT
Brass
7,500
N-702A
Female NPT
Male NPT
Female NPT
Male NPT
Female NPT
Call
for more information or to place an order ‡ZZZVXSHULRUSURGFRP
51
brass cga cylinder to regulator adaptors
CGA 200-300 Part No. CGA 200-510
A-775
500 PSI
A-780
500 PSI
Acetylene
ylinder
nder
Cylinder
G
GA-200)
(CGA-200)
Acetylene Cylinder (CGA-200)
Commercial Acetylene
Regulator (CGA-300)
A-784
A-789
A-800
A-801
500 PSI
Commercial Acetylene
Cylinder (CGA-300)
1 pc. Adaptor
CGA 320-580 Part No. CGA 320-580
A-809
Carbon Dioxide
Cylinder (CGA-320)
Argon, Helium, or Nitrogen
Regulator (CGA-580)
52
3000 PSI
Carbon Dioxide
Cylinder (CGA-320)
1 pc. Adaptor
Argon, Helium, or Nitrogen
Regulator (CGA-580)
Acet lene B
Acetylene
Regulator (CGA-520)
CGA 300-200
250 PSI
CGA 300-510
Part No.
A-802
500 PSI
A-792
500 PSI
Acetylene “MC”
Regulator (CGA-200)
CGA 300-520
3000 PSI
Part No.
A-804
500 PSI
Commercial Acetylene
Cylinder (CGA-300)
510 Acetylene P.O.L.
Regulator (CGA-510)
CGA 346-540
Part No.
Commercial Acetylene
Cylinder (CGA-300)
Commercial Acetylene
Cylinder
ylinder (CGA-300)
Part No.
A-810
A-783
500 PSI
Industrial Air
(CGA-590)
Regulator
Acetylene P
P.O.L.
Regulator (CGA-510)
Acetylene P.O.L.
Regulator (CGA-510)
3000 PSI
A-968
3000 PSI
CGA 200-300
Part No.
Acetylene “MC”
nder
der (CGA(CGA 200))
Cylinder
Medical Breathing Mixtures
Mixtur
Mix
tures
es
Cyli
yl nde
nder
CGA-280 Cylinder
Part No.
CGA 200-520
Acetylene P.O.L.
Regulator (CGA-510)
Oxygen
Ox
Re
Regulator
(C
(CGA-540)
CGA 300-510 Part No. CGA 300-510
0
Commercial Acetylene
Cylinder (CGA-300)
A-781
250 PSIPart No.
PartCGA
No. 200-300
CGA 280-590
3000 PSI
Acetylene B
Regulator (CGA-520)
500 PSI
Part No.
500 PSI
Acetylene P
P.O.L.
OL
Regulator (CGA-510)
Medical Breathing Mixtures
Mi
80 Cylinder
CGA-280
Acetylene “MC”
Cylinder (CGA-200)
CGA 200-510
Acetylene “MC”
Cylinder (CGA-200)
CGA 200-520 Part No. CGA 280-540
500 PSI
Part No.
Part No.
A-930
Acetylene B
Regulator (CGA-520)
CGA 346-580
3000 PSI
Part No.
A-935
Air Cylinder
(CGA-346)
Air Cylinder
(CGA-346)
Oxygen
Regulator
(CGA-540)
www.superiorprod.com
Argon, Helium, or Nitrogen
Regulator (CGA-580)
brass cga cylinder to regulator adaptors
CGA 350-580
Part No. CGA 415-510
A-820
3000 PSI
Hydrogen, Methane
Cylinder (CGA-350)
500 PSI
A-827
500 PSI
Part No.
A-909
3000 PSI
CGA 510-300
Part No.
A-828
500 PSI
Acetylene P.O.L.
Cylinder (CGA-510)
A-830
CGA 510-300
Part No.
A-831
500 PSI
CGA 500-580
Part No.
A-912
3,000 PSI
Medical Mixtures
Cylinder
(CGA-500)
Oxygen
Regulator
(CGA-540)
Acetylene P.O.L.
Regulator (CGA-510)
Part No.
Acetylene P.O.L.
Cylinder (CGA-510)
CGA 500-540
Medical Mixtures
ures
ure
Cylinder (CGA-500)
GA-5
A-500)
00
Canadian L.A.
Acetylene Cylinder
(CGA-415)
Argon, Helium, or Nitrogen
Regulator (CGA-580)
CGA 510-200
Part No.
Acetylene P.O.L.
Cylinder (CGA-510)
Argon, Helium, or Nitrogen
Regulator (CGA-580)
CGA 510-410
Part No.
A-836
500 PSI
Acetylene P.O.L.
Cylinder (CGA-510)
1 pc Adaptor
Acetylene “MC”
Regulator (CGA-200)
CGA 510-510
Part No.
A-838
500 PSI
Commercial Acetylene
Regulator (CGA-300)
CGA 510-520
Acetylene P.O.L.
Cylinder (CGA-510)
Acetylene P.O.L.
Cylinder (CGA-510)
Acetylene P.O.L.
Regulator (CGA-510)
CGA 520-510
Part No.
A-848
500 PSI
Acetylene B
Cylinder (CGA-520)
Acetylene P.O.L.
Regulator (CGA-510)
Call
PartCGA
No. 200-300
CGA 520-200
Part No.
250 PSI
A-840
500 PSI
Acetylene B
Cylinder (CGA-520)
Part No.
A-850
500 PSI
A-842
500 PSI
Acetylene B
nder
der (CGA-520)
Cylinder
Acetylene P.O.L.
Regulator (CGA-510)
CGA 520-300
CGA 540-346
3000 PSI
Part No.
A-844
500 PSI
Acetylene B
Cylinder (CGA-520)
Acetylene “MC”
“MC
“M
Regulator (CGA-200)
Acetylene B
Regulator (CGA-520)
CGA 520-510
Canadian Acetylene
Regulator (CGA-410)
Commercial Acetylene
Regulator (CGA-300)
Part No.
A-866
Commercial Acetylene
Regulator (CGA-300)
CGA 540-580
3000 PSI
Part No.
A-862
Oxygen Cylinder
(CGA-540)
Oxygen Cylinder
(CGA-540)
Air
Regulator
(CGA-346)
Argon, Helium, or Nitrogen
Regulator (CGA-580)
for more information or to place an order ‡ZZZVXSHULRUSURGFRP
53
brass cga cylinder to regulator adaptors
CGA 555-510 Part No. CGA 555-580
A-948
500 PSI
Propane (L.W.)
Cylinder (CGA-555)
3000 PSI
Argon, Helium, or Nitrogen
Regulator (CGA-580)
CGA 580-540 Part No. CGA 580-590
A-876
Argon, Helium, or Nitrogen
Cylinder (CGA-580)
Oxygen Regulator
(CGA-540)
54
CGA 580-320
Part No.
A-870
3000 PSI
Argon, Helium, or Nitrogen
Cylinder (CGA-580)
Propane (L.W.)
Cylinder (CGA-555)
Acetylene P.O.L.
Regulator (CGA-510)
3000 PSI
Part No.
A-952
Part No.
A-879
3000 PSI
Argon, Helium, or Nitrogen
Cylinder (CGA-580)
Industrial Air
Regulator (CGA-590)
CGA 580-346
3000 PSI
A-882
Argon, Helium, or Nitrogen
Cylinder (CGA-580)
Air Regulator
(CGA-346)
Carbon Dioxide
Regulator (CGA-320)
CGA 590-346
Part No.
3000 PSI
Part No.
A-894
Industrial Air Cylinder
(CGA-590)
CGA 590-580
3000 PSI
Part No.
A-892
Industrial Air Cylinder
(CGA-590)
Air Regulator
(CGA-346)
www.superiorprod.com
Argon, Helium, or Nitrogen
Regulator (CGA-580)
FU\RJHQLFKRVHÀWWLQJV
FLARE TUBING ADAPTORS
500 PSI
CGA
FA-4404
Connection
&*$PDOH &*$PDOH &*$PDOH &*$PDOH &*$PDOH &*$PDOH &*$PDOH &*$PDOH &*$PDOH &*$PDOH &*$/+PDOH
Gas
´ÀDUH[´0137
´ÀDUH[´0137
´ÀDUH[´0137
´ÀDUH[´0137
´ÀDUH[´0137
´ÀDUH[´0137
´ÀDUH[´0137
´ÀDUH[´0137
´ÀDUH[´0137
´ÀDUH[´0137
´ÀDUH[´0137
CGA 440 Oxygen Cryogenic Transfer Hose
5HIULJHUDQWV 5HIULJHUDQWV 5HIULJHUDQWV &U\RJHQLF,QHUW
&U\RJHQLF,QHUW &U\RJHQLF,QHUW &U\RJHQLF2[\JHQ
&U\RJHQLF2[\JHQ
&U\RJHQLF2[\JHQ
&U\RJHQLF2[\JHQ
0HWKDQH1DWXUDO*DV
Part No.
FA-1651
FA-1652
FA-1822
FA-2952
FA-2953
FA-2954
FA-4402
FA-4403
FA-4404
FA-4405
FA-4502
CGA 295 Nitrogen Cryogenic Transfer Hose
(B)=Brass Ends (S)=Stainless Steel Ends – Insert type of material. (B)=Brass Ends (S)=Stainless Steel Ends
500 PSI
STAINLESS STEEL
CHS-440-440-72
CGA 440 female both ends 48” long
CGA 440 female both ends 60” long
CGA 440 female both ends 72” long
CGA 440 female both ends 120” long
CGA 440 female both ends 144” long
CH(
CH(
CH(
CH(
CH(
)-440-440-48
)-440-440-60
)-440-440-72
)-440-440-120
)-440-440-144
*Other lengths available. Call for part number.
500 PSI
STAINLESS STEEL
CHS-295-295-72
CGA 295 female both ends 48” long
CH( )-295-295-48
CGA 295 female both ends 60” long
CH( )-295-295-60
CGA 295 female both ends 72” long
CH( )-295-295-72
CGA 295 female both ends 120” long CH( )-295-295-120
CGA 295 female both ends 144” long CH( )-295-295-144
Example - CHS-295-295-72 = CGA Stainless Steel ends 72” long
Quick Connect Tee Handle
Quick Connect Handwheel
500 PSI
STAINLESS STEEL
Oxygen CGA 440 Handwheel
Nitrogen/Inert CGA 295 Handwheel
HTC-440
HTC-295
500 PSI
STAINLESS STEEL
Oxygen CGA 440 Tee Handle
Nitrogen/Inert CGA 295 Tee Handle
Cryogenic Phase Separator
Fill Elbow
500 PSI
STAINLESS STEEL
3/8” female NPT
Call
CHTE-440
CHTE-295
CPS-001
500 PSI
STAINLESS STEEL
Oxygen CGA 440
Nitrogen/Inert CGA 295
for more information or to place an order ‡ZZZVXSHULRUSURGFRP
CEL-440
CEL-295
55
rigid copper & stainless steel pigtails
PTH-4346
PT-4540CV
(Approximately 20” Overall Length)
PT-540CV
PT-540SS
5LJLG3LJWDLO$VVHPEOLHVZLWK6LQJOH'RXEOH/RRS
CGA No.
300
250
3000
320
Standard
Pigtail
3000
510
510-90°
540
580
500
250
Plastic H.T.
Nut-One End
S.S. Tube &
S.S Ends
Copper pigtail
2 loops,brass ends
N/A
*PT-300
PT-320SS
PTW-4326
PTW-4346
PTW-4350
PT-326SS
PT-346SS
PT-350SS
PT-320
PT-326
PTW-4510
PT-510SS
PTH-4540
PTH-4580
*PTW-3510
PTW-4540
PTW-4580
N/A
PT-540SS
PTH-4590
PTW-4590
*PTH-3300
PT-4320
PT-4326
PTH-4320
PTH-4326
PT-4346
PT-4350
PT-4510
*PT-3510
PTH-4346
PTH-4350
PTH-4510
*PTH-3510
PT-4540
PT-4580
PT-4590
3000
3000
3000
Brass Wrench
One End
*PTW-3300
PTW-4320
*PT-3300
3000
3000
326
346
350
590
Operating
Pressure (PSI)
PT-346
PT-350
PT-510
N/A
PT-540
PT-580
PT-580SS
PT-590SS
PT-590
To add check valve to inlet, add “CV”. For reverse check valve on outlet, add “RCV” (see pg. 23 for explanation).
* All pigtails designated for Acetylene service are built with brass tubing.
Annealed Copper Coiled Tubing 3000 psi
Part No.
Seamless copper tubing 1/4”O.D. x .065 wall
CT-44
Seamless copper tubing 5/16”O.D. x .065 wall
CT-45
CT-44
50 ft. Rolls, Not Cleaned for 02 service
NPT ends for copper & brass tubing 3000 psi
Part No.
Male 1/4” NPT x 5/16” O.D. Tubing
XPTE-004C3
Female 1/4” NPT x 1/4” O.D. Tubing
XPTE-005C2
Female 1/4” NPT x 1/4” O.D. Tubing, Stainless Steel
XPTE-005C2SS
Female 1/4” NPT x 5/16” O.D. Tubing
XPTE-005C3
XPTE-005C3
XPTE-004C3
Snap rings for pigtail nut & nipples
Snap Ring - Secures Nut to Nipple
XSR-020
Standard package of 25
56
www.superiorprod.com
XSR-020
min. length=6”
max length=600”
ÁH[LEOHKRVHW\SHV
PTFE/STAINLESS BRAIDED HOSE
EXAMPLE
EXAMPLE:
PTF-580H-580-24
PTF
Hose Type
-
36,:25.,1*35(6685(
580H
Inlet
-
580
Outlet
EXAMPLE
PTFT
Hose Type
-
34I
Inlet
-
34I
Outlet
36,:25.,1*35(6685(
24
Length
For use in Helium and Hydrogen gas service to reduce effusion of lighter than air gases. ETFE Hose
is also good for high purity applications where off gassing of hydrocarbons and low diffusion rate is a
concern. Please note ETFE has a lower diffusion rate than PTFE, although it does not provide zero
effusion. For zero effusion, use rigid copper, brass or stainless steel. Available with Armor Guard or
spring guard.
6SHFL¿FDWLRQV ‡´1RPLQDO,'
‡%UDLGLV7\SHVWDLQOHVVVWHHOOLQLQJLV(7)(
‡7HPSHUDWXUHUDWLQJƒFWRƒF
‡%XUVWSUHVVXUHLV36,DWURRPWHPSHUDWXUH
‡0LQLPXPEHQGUDGLXVRILQFKHVIRUPD[LPXPVDIHW\OLIH
NYLON SYNTHETIC BRAIDED HOSE
EXAMPLE
EXAMPLE:
PTFN-N341-N341-24
24
Length
Superior PTF Series PTFE Lined Stainless Braided Pigtails are designed for 3000 PSI working
pressure for a broad range of applications. Comes standard with stainless steel ferrules for longer
service life. Available with Armor Guard or spring guard.
Not recommened for lighter than
6SHFL¿FDWLRQV ‡´1RPLQDO,'
air gases based on effusion
‡%UDLGLV7\SHVWDLQOHVVVWHHO ‡7HPSHUDWXUHUDWLQJƒFWRƒF
‡%XUVWSUHVVXUHLV36,DWURRPWHPSHUDWXUH
‡0LQLPXPEHQGUDGLXVRILQFKHVIRUPD[LPXPVDIHW\OLIH
ETFE/STAINLESS BRAIDED HOSE
EXAMPLE:
PTFT-34I-34I-24
-
PTFN
Hose Type
-
N 34I
Inlet
-
N34I
Outlet
36,:25.,1*35(6685(
24
Length
For use in Helium and Hydrogen gas service to reduce effusion of lighter than air gases. Please note
synthetic nylon tube has a lower diffusion rate than PTFE, although it does not provide zero effusion.
For zero effusion, use rigid copper, brass or stainless steel. Available with Armor Guard or spring guard.
Not for oxygen service
6SHFL¿FDWLRQV ‡´1RPLQDO,'
‡%UDLGLVV\QWKHWLFILEHUOLQLQJLVH[WUXGHGQ\ORQSRO\XUHWKDQHFRYHU
‡7HPSHUDWXUHUDWLQJƒFWRƒF
‡%XUVWSUHVVXUHLV36,DWURRPWHPSHUDWXUH
‡0LQLPXPEHQGUDGLXVRILQFKHVIRUPD[LPXPVDIHW\OLIH
PTFE/STAINLESS DOUBLE BRAIDED HOSE
EXAMPLE
PTF6
Hose Type
-
680
Inlet
-
641SS
Outlet
36,:25.,1*35(6685(
24
Length
For newer high pressure CGA’s. PTFE lined, stainless braided hose is available with or without Armor
Guard for 6,000 PSI working pressure.
EXAMPLE:
PTF6-680-64ISS-24
6SHFL¿FDWLRQV ‡´1RPLQDO,'
‡%UDLGLV7\SHVWDLQOHVVVWHHO ‡7HPSHUDWXUHUDWLQJƒFWRƒF
‡%XUVWSUHVVXUHLV36,DWURRPWHPSHUDWXUH
‡0LQLPXPEHQGUDGLXVRILQFKHVIRUPD[LPXPVDIHW\OLIH
POST SINTERED, DOUBLE BRAIDED, PTFE HOSE
EXAMPLE
PTF36
Hose Type
-
34I
Inlet
-
34I
Outlet
36,:25.,1*35(6685(
24
Length
For newer high pressure CGA’s. PTFE lined, stainless braided hose is available with or without Armor
Guard for 3,600 PSI working pressure.
EXAMPLE:
PTF36-34I-34I-24
Call
6SHFL¿FDWLRQV ‡´1RPLQDO,'
‡%UDLGLV7\SHVWDLQOHVVVWHHO ‡7HPSHUDWXUHUDWLQJƒFWRƒF
‡%XUVWSUHVVXUHLV36,DWURRPWHPSHUDWXUH
‡0LQLPXPEHQGUDGLXVRILQFKHVIRUPD[LPXPVDIHW\OLIH
for more information or to place an order ‡ZZZVXSHULRUSURGFRP
57
NFPA compliant hospital pigtails
NFPA Replacement Pigtails for Hospital Medgas Systems
|__________________________________________ Aprox. 20”
‡ 304 Stainless Steel Braid
‡37)(&RUH
‡36,:RUNLQJ3UHVVXUH
‡/HDN7HVWHG%DJJHG
Inlet/Outlet Threads
&DUERQ'LR[LGH 1LWURXV2[LGH
0HGLFDO$LU
0HGLFDO0L[WXUH 1LWURJHQ+HOLXP Oxygen
Nitrous Oxide
&*$)HPDOH1XW
&*$)HPDOH1XW
&*$)HPDOH1XW
&*$0DOH1XW
&*$0DOH1XW
CGA 540 Female Nut
CGA 326 Female Nut
ends per NFPA code
Hose Materials
|
‡ Annealed Copper Tubing
‡´2'[ZDOO
‡6LOYHU%UD]HG(QG)LWWLQJV
‡36,:RUNLQJ3UHVVXUH
‡3HUPDQHQWQRQUHPRYDEOH&*$¿WWLQJ
‡3HUPDQHQWQRQUHPRYDEOH&*$¿WWLQJHQGVSHU1)3$FRGH
‡6WDLQOHVV6WHHO%UDLGQRWIRUXVHZLWK2[\JHQ
Gas Service
______________________________
6WDLQOHVV6WHHO7HÀRQ
6WDLQOHVV6WHHO7HÀRQ
6WDLQOHVV6WHHO7HÀRQ
6WDLQOHVV6WHHO7HÀRQ
6WDLQOHVV6WHHO7HÀRQ
Copper/Brass ends
Copper/Brass ends
72” Liquid Cylinder Gas Use Pigtails
Part No.
PTFP-320-24 or 36
PTFP-326-24 or 36
PTFP-346-24 or 36
PTFP-500-24 or 36
PTFP-580-24 or 36
PT-4540
PT-4326
‡ Black polyester blend perforated cover
‡´,'1\ORQ&RUH
‡36,:RUNLQJ3UHVVXUH
‡7HPSHUDWXUHUDWLQJ)WR)
‡ Permanent non removable CGA
for use with Dewar manifold systems
¿WWLQJHQGVSHU1)3$FRGH
Gas Service
Inlet/Outlet Threads
Hose Material
Part No.
Carbon Dioxide
Nitrous Oxide
Medical Air
Medical Mixture
Oxygen
Nitrogen, Helium
CGA 320 Female Nut
CGA 326 Female Nut
CGA 346 Female Nut
CGA 500 Male Nut
CGA 540 Female Nut
CGA 580 Male Nut
3/8” I.D. Nylon Tube
3/8” I.D. Nylon Tube
3/8” I.D. Nylon Tube
3/8” I.D. Nylon Tube
3/8” I.D. Nylon Tube
3/8” I.D. Nylon Tube
PFSL-320-72
PFSL-326-72
PFSL-346-72
PFSL-500-72
PFSL-540-72
PFSL-580-72
7KHSLJWDLOVRQWKLVSDJHDUHVSHFLDOO\GHVLJQHGWRPHHWWKHUHTXLUHPHQWVRI1)3$IRU+RVSLWDOPHGJDVPDQLIROGV\VWHPV7KH
PDMRUIHDWXUHEHLQJ1)3$¶VUHTXLUHPHQWIRUSHUPDQHQWDI¿[HGHQGVWRDYRLGFURVVFRQQHFWLRQWKURXJKPRGL¿FDWLRQRUVZLWFKLQJ
RIWKHQXWDQGQLSSOHWRKRRNXSDGLIIHUHQWJDVWKDQDV\VWHPZDVGHVLJQHGIRU7KHRWKHUUHTXLUHPHQWLVDPDQGDWRU\FRSSHU
SLJWDLOIRUXVHLQKLJKSUHVVXUHR[\JHQVHUYLFH6RPHVWDWHVDOVRUHTXLUHWKDWEHFDXVH1LWURXV2[LGHLVDQR[LGL]HUFRSSHULV
DOVRUHTXLUHG
58
www.superiorprod.com
ÁH[LEOHSLJWDLOV
STANDARD 1/4 Inch Flexible PIGTAILS
‡6WDLQOHVV6WHHO%UDLG
‡37)(RU(7)(&RUH
‡RU36,:RUNLQJ3UHVVXUH
‡3UHVVXUH7HVWHG
‡&OHDQHGEDJJHGIRUR[\JHQVHUYLFH
‡6WDLQOHVV6WHHO&ROODU
PTF-34I-34I-24
PTF6-64ISS-64ISS-24
Stainless Steel Braided PTFE or ETFE with 1/4” NPT Female Brass Ends
Materials
Inlet Threads
Outlet Threads
Length
Part No.
PTFE core/SS braid, brass ends
1/4”NPT female
X
1/4”NPT female
18”
PTF-34I-34I-18
PTFE core/SS braid, brass ends
1/4”NPT female
X
1/4”NPT female
24”
PTF-34I-34I-24
PTFE core/SS braid, brass ends
1/4”NPT female
X
1/4”NPT female
36”
PTF-34I-34I-36
PTFE core/SS braid, brass ends
ETFE core/SS braid, brass ends
ETFE core/SS braid, brass ends
1/4”NPT female
1/4”NPT female
1/4”NPT female
X
X
X
1/4”NPT female
1/4”NPT female
1/4”NPT female
48”
18”
24”
PTF-34I-34I-48
PTFT-34I-34I-18
PTFT-34I-34I-24
ETFE core/SS braid, brass ends
1/4”NPT female
X
1/4”NPT female
36”
PTFT-34I-34I-36
ETFE core/SS braid, brass ends
1/4”NPT female
X
1/4”NPT female
48”
PTFT-34I-34I-48
Stainless Steel Double Braided PTFE with 1/4” NPT Female Stainless Steel Ends
Materials
Inlet Threads
Outlet Threads
Length
Part No.
PTFE core/SS braid, SS ends
1/4”NPT female
X
1/4”NPT female
18”
PTF6-64ISS-64ISS-18
PTFE core/SS braid, SS ends
1/4”NPT female
X
1/4”NPT female
24”
PTF6-64ISS-64ISS-24
PTFE core/SS braid, SS ends
1/4”NPT female
X
1/4”NPT female
36”
PTF6-64ISS-64ISS-36
PTFE core/SS braid, SS ends
1/4”NPT female
X
1/4”NPT female
48”
PTF6-64ISS-64ISS-48
SPECIAL CONFIGURED PIGTAILS
Ordering Information
6XSHULRU¶VÀH[LEOHKRVHDVVHPEOLHVDUHPDGHWRRUGHUWHVWHGDQGLQGLYLGXDOO\EDJJHG(DFKFRQ¿JXUHGSDUWQXPEHU
consists of four elements: (see below) The 1stSODFHKROGHUVSHFL¿HVWKHW\SHRIKRVH37)HWF7KH2nd place holder
VSHFL¿HVWKHLQOHW¿WWLQJDQGRUDFFHVVRULHVVXFKDV+ R[\JHQZLWKDKDQGWLJKWQXWQLSSOHRQWKHLQOHW7KH3rd
SODFHKROGHUVSHFL¿HVRXWOHWFRQQHFWLRQDQGRUDFFHVVRULHV7KH4th place holder designates the length of hose in inches.
TYPE OF HOSE
PTF
3,000 PSI
PTFT PTFN
3,000 PSI
3,000 PSI
PTF6
PTF36
6,000 PSI
3,600 PSI
PTFE TUBE ETFE TUBE NYLON TUBE PTFE TUBE
TUBE
Stainless Steel Stainless Steel
BRAID
BRAID
Synthetic
BRAID
Stainless Steel
DOUBLE BRAID
Post Sintered PTFE
END CONNECTION
& ACCESSORIES
STATED AS CGA &
OPTIONS PG. 65
END CONNECTION
& ACCESSORIES
STATED AS CGA &
OPTIONS PG. 65
LENGTH OF HOSE
STATED IN INCHES
Stainless Steel
DOUBLE BRAID
540 reverse
ÀRZ&9
540 handtight
nut
24”
FLOW
length in inchess
len
Final part # for example:
PTF-540H-540RCV-24
Call
for more information or to place an order ‡ZZZVXSHULRUSURGFRP
59
available hose options and features
Spring Guard is available for Superior’s PTF, PTFT, PTF36,
PTF6, and PTFN Series hoses. Spring Guard provides
SURWHFWLRQIURPNLQNLQJDQGDEUDVLRQRI\RXUÀH[LEOHKRVH
The crimped ends offer whip protection if the hose is severed.
6SHFL¿FDWLRQ'HSHQGHQWRQWKHW\SHRIKRVHEHLQJXVHG
(see available hoses on the previous page)
Spring Guard
Braided
Female NPT
Armor Guard
Protection
xxx
34I
Male NPT
xxx
34E
Female CGA’s
xxx
540
Male CGA’s
xxx
580
Check Valve Nipple
CV
Reverse Flow
Check Valve Nipple
RCV
Elbow
60
PTFSG
Armor guard Is available for Superior’s PTF, PTFT, PTF36,
PTF6, and PTFN Series Stainless hoses. Armor Guard
provides protection from cutting, kinking, abrasion, or crushing
\RXUÀH[LEOHKRVH7KHFULPSHGHQGVRIIHUZKLSSURWHFWLRQLIWKH
hose is severed.
6SHFL¿FDWLRQV'HSHQGHQWRQWKHW\SHRIKRVHEHLQJXVHGVHH
available hoses on the previous page)
PTFG
1/4” FNPT Swivel
FLOW
FLOW
SW
Male CGA
Handtight
H
Female CGA
Handtight
H
Flash Arrestor
FA
O2 Adibiatic
Heat Sink End
HS
Valves
L
www.superiorprod.com
V
pigtail end options
Male NPT
Female NPT
Brass 1/8” Female NPT
Brass 1/4” Female NPT
Stainless Steel 1/4” Female NPT
Brass 3/8” Female NPT
Brass 1/2” Female NPT
=
=
=
=
=
32I
34I
34ISS
36I
38I
Brass 1/8” Male NPT
Brass 1/4” Male NPT
Stainless Steel 1/4” Male NPT
Brass 3/8” Male NPT
Brass 1/2” Male NPT
=
=
=
=
=
32E
34E
34ESS
36E
38E
Handtight
Female CGA
CGA 280
=
280
CGA 300
=
300H
CGA 300
CGA 320
CGA 326
CGA 330
CGA 346
CGA 350
=
=
=
=
=
=
CGA 326
CGA 346
CGA 347
=
=
=
=
=
CGA 350
CGA 520
CGA 540
CGA 555
=
=
=
=
326H
346H
347H*
350H**
CGA 577
CGA 701
300
320
326
330
346
350**
577*
701*
* Only on 6,000 PSI Hose (PTF6)
** Only with ETFE or Nylon Hose (PTFT/PTFN)
520H
540H
555H
* Only on 6,000 PSI Hose (PTF6)
** Only with ETFE or Nylon Hose (PTFT/PTFN)
Handtight
Male CGA
CGA 296
=
296
CGA 500
CGA 510
CGA 580
=
=
=
500
510
580**
** For Helium Use, ETFE or Nylon hose is recommended (PTFT/PTFN)
CGA 296
CGA 500
CGA 510
CGA 580
CGA 590
=
=
=
=
=
296H
500H
510H
580H**
590H
* Only with 6,000 PSI (PTF6)
** For Helium Use, ETFE or Nylon hose is recommended (PTFT/PTFN)
Female CGA Valve Outlets
Male CGA Valve Outlets
CGA 5
54
540
CGA 580
58
80
CGA 300
=
300M
CGA 500
=
500F
CGA 320
CGA 326
CGA 346
CGA 347
CGA 350
CGA 540
CGA 555
=
=
=
=
=
=
=
CGA 510
CGA 580
CGA 590
CGA 680
=
=
=
=
510F
580F**
590F
680F*
CGA 577
CGA 701
=
=
320M
326M
346M
347M*
350M**
540M
555M
577M*
701M*
* Only on 6,000 PSI Hose (PTF6)
** For Helium Use, ETFE or Nylon hose is recommended (PTFT/
PTFN)
* Only on 6,000 PSI Hose (PTF6)
** Only with ETFE or Nylon Hose (PTFT/PTFN)
$OO+DQGWLJKW1XWVDUHSODVWLFKDQGOHVZLWKEUDVVLQVHUW$OOEUDVV+DQGWLJKW1XWVDYDLODEOHRQVSHFLDOUHTXHVW
Call
for more information or to place an order ‡ZZZVXSHULRUSURGFRP
61
pigtail ordering matrix
1. Pick Your Hose Type
2. Guard Option
PTF, PTFT, PTFN, PTF6, PTF36
PTFE,
ETFE,
SYNTHETIC
TUBE
6000 PSI,
POST SINTERED 3600
PTFE DOUBLE BRAID
G = Armor Guard
SG=Spring Guard
PTFSG
EXAMPLE:
PTF-580H-580-36
EXAMPLE:
PTFSG-G341-G341-24
PTFG
EXAMPLE:
PTFT-34I-34I-36
Armor guard
minimum
length 24”
EXAMPLE:
PTFG-G341-G341-24
EXAMPLE:
PTFN-N341-N341-24
EXAMPLE:
PTF6-680-64ISS-36
EXAMPLE:
PTF36-34I-34I-24
3. CGA or NPT Thread at Inlet
END CONNECTION STATED AS THE CGA
OF THE GAS YOU WISH TO USE IN THE
HOSE OR THE TYPE OF TANK
34E
34ESS
34I
34ISS
36I
38I
44I
FEMALE CGA
280
300
320
326
330
346
347
350**
410
415
520
540
555
577*
660
701*
FEMALE CGA HT 300H
320H
326H
346H
347H*
350H**
520H
540H
555H
MALE CGA 296
500
510
580**
590
680*
MALE CGA HT 296H
500H
510H
580H**
590H
Brass 1/4 Male NPT
Stainless Steel 1/4 Male NPT
Brass 1/4 Female NPT
Stainless Steel 1/4 Female NPT
Brass 3/8 Female NPT
Brass 1/2 Female NPT
Brass 1/4 Female NPT, 3600 psi
* Only on 6,000 PSI Hose (PTF6)
** Only with ETFE or Nylon Hose (PTFT/PTFN) CGA
62
www.superiorprod.com
pigtail ordering matrix
4. Options for either end
ADDITIONAL OPTIONS OR
ENHANCEMENTS
S U C H A S C H E C K VA LV E S ,
VA LV E S , E L B O W S , S W I V E L ,
BRASS WRENCH, HEAT SINK
CV
FLOW
RCV
FLOW
L
V
SW
PW
FA
5. CGA or NPT thread at outlet
END CONNECTION STATED AS THE CGA
OF THE GAS YOU WISH TO USE IN THE
HOSE OR THE TYPE OF TANK
Brass 1/4 Male NPT
Stainless Steel 1/4 Male NPTE
Brass 1/4 Female NPT
Stainless Steel 1/4 Female NPT
Brass 3/8 Female NPT
Brass 1/2 Female NPT
Brass 1/4 Female NPT, 3600 psi
34E
34ESS
34I
34ISS
36I
38I
44I
6. Length of hose (in inches)
STANDARD LENGTHS SHOWN
CUSTOM LENGTHS AVAILABLE TOO
Max - 50 ft (600”)
Not cleaned for oxygen service past 20 ft.
Superior Product’s Online
3LJWDLO&RQ¿JXUDWRU
FEMALE CGA 280
One more way to order your custom pigtails
00
320
326
330
346
347
350**
410
415
520
540
555
577*
660
701*
FEMALE CGA HT 300H
320H
326H
346H
347H*
350H**
520H
540H
555H
MALE CGA 296
500
510
580**
590
680*
from www.superiorprod.com
&RQ¿JXUH\RXUFXVWRPSLJWDLOVE\VHOHFWLQJ
-Hose type
-Hose length
-Inlet connection
,QOHW¿WWLQJV
-Inlet thread material
-End options inlet
-Outlet connection
6L]HRIRXWOHW¿WWLQJV
-Outlet thread material
-End options outlet
MALE CGA HT 296H
MA
MAL
(Acetylene only, 500 PSI)
500H
510H
580H**
590H
HS
Call
for more information or to place an order ‡ZZZVXSHULRUSURGFRP
63
Semi-Automatic Changeover Fuel Gas & Manifold Accessories
ZERO CLEARANCE FITTINGS
1,000 PSI
‡=HURFOHDUDQFHIRUHDV\UHPRYDORISLSHGFRPSRQHQWV‡$OOWKUHDGVL]HVFDQEHPL[HGDQGPDWFKHG
‡/DUJHVWSRVVLEOHWKURXJKKROHVIRUPD[LPXPÀRZ
Flange Part No.
FL-ZC-04
FL-ZC-06
FL-ZC-08
FL-ZC-12
Nut Part No.
Thread
N-ZC-001
1/4"-18NPT-M
3/8"-18NPT-M
1/2"-14NPT-M
3/4"-14NPT-M
Nut for all zero
clearance sets
O-Ring Part No. *Boss includes O-Ring
Boss Part No. Thread
N-ZC-04A
N-ZC-06A
N-ZC-08A
N-ZC-12A
OR-024B7
O-ring for all zero
clearance sets
1/4"-18NPT-F
3/8"-18NPT-F
1/2"-14NPT-F
3/4"-14NPT-F
FUEL GAS
SEMI-AUTOMATIC CHANGEOVER
DRY TYPE FLASH BACK
ARRESTORS GMA-FK series
GMA-SA HIGH PRESSURE SERIES
'HVLJQHGWRUHJXODWHÀRZIURPKLJKSUHVVXUH
cylinders (up to 3,000 PSI), the GMA-SA series or
GMA-SAHP series provides an uninterrrupted gas
supply when changing from the "In Use" side to the
"Reserve" side, Line delivery pressure remains
constant to the pipeline during the changeover cycle.
The SA series is perfect for fuel gas as it comes with
a NEMA 4 explosion proof cabinet. The SA series
LVHDV\WRRSHUDWH$OOWKDWLVUHTXLUHGDIWHUF\OLQGHU
change out is to move the lever to selected primary
gas supply bank for the manifold. The SA series is
a mechanical pressure differential system that does
QRWUHTXLUHSRZHUWRRSHUDWH9LVXDODQGDXGLEOH
alarms are available if power at the site is available.
6XSHULRU
VÀDVKDUUHVWRUNLWSURYLGHVÀDVKEDFN
UHYHUVHÀRZDQGSUHVVXUHUHOLHISURWHFWLRQLQ
one compact device. This unit is included with a
Superior Products acetylene manifold for more
than 2 cylinders. It is also available as an option
for use with hydrogen or propane manifolds.
‡1RZDWHURUÀXLGWRFKHFNRUUHSOHQLVK
‡$SSURYHGVDIHW\GHYLFHXQGHU$16,=
‡+HOSPHHW26+$1)3$VDIHW\VWDQGDUGV
UGV
‡%XLOWLQUHOLHIYDOYHPHHWV1)3$UHTXLUHPHQWV
Part No.
Type
GMA-FKA
GMA-FKP-40
GMA-FKP-60
GMA-FKH
Acetylene
Propane
Propane
Hydrogen
Capacity
Inlet/Outlet
Relief Valve
300
300
300
300
1/2” NPT
1/2” NPT
1/2” NPT
1/2” NPT
15 PSIG
40 PSIG
60 PSIG
40 PSIG
How to Order
Control Type + Gas/CGA Service + Total # of Cylinders
Ex. GMA-SA or SAHP-580-4
Semi-Automatic changeover, inert service, 4 tanks
64
www.superiorprod.com
PROPORTIONAL GAS MIXERS
PRO-MIX GAS MIXERS
GMA-MX series
Proportional Gas Mixer
6XSHULRU3URGXFW
V30;PL[HUVDUHVXLWHGIRUDOODSSOLFDWLRQVZKHUHSUHFLVHJDVPL[WXUHVDUHUHTXLUHG7KHVHQRQDGMXVWDEOH
KLJKPL[DFFXUDF\IXOOVFDOHRIF\OLQGHUSUHVVXUHRIIHUDSULFHDGYDQWDJHRYHUOHVVDFFXUDWHDGMXVWDEOHPRGHOV7KH
0;VHULHVUHTXLUHVNO SURGE TANK to maintain mixture accuracy. The panel is a small wall mounted unit that is easy
WRLQVWDOODQGUHTXLUHVQRHOHFWULFLW\RQJRLQJPDLQWHQDQFHRUDGMXVWPHQW
Features
‡ Tamper proof
‡+LJKO\DFFXUDWH
‡/RZVWDUWXSFRVW
‡ Compact
‡1RVXUJHWDQNUHTXLUHG(MX2000)
0L[HU6SHFL¿FDWLRQV *0$0;series
Inlet pressure range
Outlet pressure
Flow rate
Mixture accuracy
,QOHW¿OWHUV
Dimensions
Weight
110-150 PSIG
0-100 PSIG adjustable
300 SCFH or 900 SCFH
± 2% (3 to 900 SCFH)
50 Micron
8”W x 10”H x 4.5”D
8 lbs.
How to Order
Mixers available for the
following Gases:
Argon
Nitrogen
Helium
CO2
Oxygen
Hydrogen
Gas Mixer Assembly
GMA-MX
GMA-MX900
GMA-MX2000
580A
580N
580H
320
540
350
-
CGA - % - CGA - %
XXX - % - XXX - %
XXX - % - XXX - %
XXX - % - XXX - %
Example: GMA-MX2000-580A-75-320-25 Mixer for Argon-75% & CO2-25%
* +LJKHUÀRZUDWHVDYDLODEOHXSRQUHTXHVW
increase in 300 SCFH increments up to 2000 SCFH
* 7KUHHJDVPL[HUVDYDLODEOHXSRQUHTXHVW
GMA-MX2000 series
Proportional Gas Mixer /High Capacity
Features
‡ Tamper proof
‡+LJKO\DFFXUDWH
‡/RZVWDUWXSFRVW
‡ Compact
‡1RVXUJHWDQNUHTXLUHG
Call
0L[HU6SHFL¿FDWLRQV *0$0;series
Inlet pressure range
Outlet pressure
Flow rate
Mixture accuracy
,QOHW¿OWHUV
Dimensions
,QOHW2XWOHW¿WWLQJV
120 PSIG
0-100 PSIG adjustable
2000 SCFH
± 2% (2 to 2000 SCFH)
50 Micron
20”W x 22”H x 6”D
1/4" NPFT
for more information or to place an order ‡ZZZVXSHULRUSURGFRP
65
CRADLE PACK MANIFOLDS FOR 6, 12 & 16 CYLINDER
SCMB Series
6XSHULRU¶V 6&0% VHULHV LV WKH LGHDO ORZ FRVW UHSODFHPHQW KHDGHU WR ¿W PRVW FRPPHUFLDOO\ DYDLODEOH
cylinder cradles. The body is machined from 1 1/2” yellow brass bar stock. Includes proper CGA valves
RU539YDOYHVDQG´ÀH[LEOHVWDLQOHVVVWHHOSLJWDLOV37)(OLQHGIRUVWDQGDUGJDVVHUYLFHRU(7)(OLQHG
for high purity and lighter than air gases (hydrogen and helium) or 3,600 PSI Post Sintered PTFE. Also
DYDLODEOHZLWKDUPRUJXDUGHGÀH[SLJWDLOVIRUKHDY\GXW\VHUYLFH7KHPRGXODUGHVLJQDQGUHPRYDEOH
ÀH[LEOHSLJWDLOVDOORZIRUTXLFNHDV\UHSDLUV
Available
to order
Available
to order
6
6
6
6
pack, stainless steel PTFE lined pigtails
pack, stainless steel ETFE lined pigtails
pack, single loop copper pigtails
pack, stainless steel 3,600 PSIG PTFE Lined Pigtail
GMA-SCMB-XXX-06
GMA-SCMB-XXXTZ-06
GMA-SCMB-XXX-06-RGD
GMA-SCMB-XXX-36-06
12
12
12
12
pack, stainless steel PTFE lined pigtails
pack, stainless steel ETFE lined pigtails
pack, single loop copper pigtails
pack, stainless steel 3,600 PSIG PTFE Lined Pigtail
GMA-SCMB-XXX-12
GMA-SCMB-XXXTZ-12
GMA-SCMB-XXX-12-RGD
GMA-SCMB-XXX-36-12
16
16
16
16
pack, stainless steel PTFE lined pigtails
pack, stainless steel ETFE lined pigtails
pack, single loop copper pigtails
pack, stainless steel 3,600 PSIG PTFE Lined Pigtail
GMA-SCMB-XXX-16
GMA-SCMB-XXXTZ-16
GMA-SCMB-XXX-16-RGD
GMA-SCMB-XXX-36-16
* For ArmorGuard Option add “AG” to part number
Example: GMA-SCMB-XXXAG-06-PTFE
*0$6&0%;;;7=$*(7)(
GMA-SCMB-XXX36AG-06-PTFE 3,600 PSI
* For Residual Pressure Valve add “RPV” to part number
Example: GMA-SCMB-XXXRPV-06
Please Note 3,600 PSIG PTFE is Post Sintered
‡2WKHU&*$¶VDYDLODEOHXSRQUHTXHVW
‡2SWLRQDO7HHZLWKJDXJHDYDLODEOHEHWZHHQYDOYHDQGEORFN
66
Available for the following gases,
replace XXX in part number with CGA#
Carbon Dioxide
Nitrous Oxide
Air
Hydrogen
Propane/Acetylene
Oxygen
Inert Gases
www.superiorprod.com
CGA 320
CGA 326
CGA 346
CGA 350
CGA 510
CGA 540
CGA 580
CRADLE PACK MANIFOLDS FOR 6, 12 & 16 CYLINDER
CPR Series
6XSHULRU¶V&35VHULHVLVDFUDGOHSDFNUHSODFHPHQWKHDGHUWR¿WPRVWFRPPRQVL]HF\OLQGHUFUDGOHV
The body is machined from 1 1/2” yellow brass bar stock. Includes proper CGA valves or RPV valves,
´ÀH[LEOHVWDLQOHVVVWHHOSLJWDLOV37)(OLQHGIRUVWDQGDUGJDVVHUYLFH(7)(OLQHGIRUKLJKSXULW\DQG
lighter than air gases (hydrogen and helium) or 3,600 PSIG Post Sintered PTFE. Also available with
DUPRUJXDUGHGÀH[LEOHSLJWDLOVIRUKHDY\GXW\VHUYLFH7KHPRGXODUGHVLJQDQGUHPRYDEOHÀH[LEOHSLJWDLOV
DOORZIRUTXLFNHDV\UHSDLUV
Availabletotoorder
order
Available
6
6
6
6
pack, stainless steel PTFE lined pigtails
pack, stainless steel ETFE lined pigtails
pack, stainless steel 3,600 PSIG PTFE lined pigtails
pack, single loop copper pigtails
GMA-CPR-XXX-06
GMA-CPR-XXXTZ-06
GMA-CPR-XXX-36-06
GMA-CPR-XXX-06-RGD
12
12
12
12
pack, stainless steel PTFE lined pigtails
pack, stainless steel ETFE lined pigtails
pack, stainless steel 3,600 PSIG PTFE lined pigtails
pack, single loop copper pigtails
GMA-CPR-XXX-12
GMA-CPR-XXXTZ-12
GMA-CPR-XXX-36-12
GMA-CPR-XXX-12-RGD
16
16
16
16
pack, stainless steel PTFE lined pigtails
pack, stainless steel ETFE lined pigtails
pack, stainless steel 3,600 PSIG PTFE lined pigtails
pack, single loop copper pigtails
GMA-CPR-XXX-16
GMA-CPR-XXXTZ-16
GMA-CPR-XXX-36-16
GMA-CPR-XXX-16-RGD
* For ArmorGuard Option add “AG” to part number
Example: GMA-CPR-XXXAG-06-PTFE
*0$&35;;;7=$*(7)(
GMA-CPR-XXX36AG-06-PTFE 3,600 PSI
* For Residual Pressure Valve add “RPV” to part number
Example:
GMA-CPR-XXXRPV-06
*Please Note 3,600 PSIG PTFE is Post Sintered
Call
‡2WKHU&*$¶VDYDLODEOHXSRQUHTXHVW
Available for the following gases,
replace XXX in part number with CGA
Carbon Dioxide
Nitrous Oxide
Air
Hydrogen
Propane/Acetylene
Oxygen
Inert Gases
CGA 320
CGA 326
CGA 346
CGA 350
CGA 510
CGA 540
CGA 580
for more information or to place an order ‡ZZZVXSHULRUSURGFRP
67
HEADERS & OPEN STYLE MANIFOLDS
MODULAR NON-BRAZED SIMPLEX HEADERS
FOR INDUSTRIAL, SPECIALTY GAS & HOSPITAL MANIFOLD SYSTEMS
Modular simplex manifold headers are a single unit design manufactured from free cutting brass bar stock. This design
eliminates all brazed joints. Each unit is tested to full operating pressure and cleaned for oxygen service per CGA-G4.1.
0DQLIROGKHDGHUVFDQEHVKLSSHGFRPSOHWHZLWKPDVWHUYDOYHLQGLYLGXDOFKHFNYDOYHLQOHWVÀH[LEOHVWDLQOHVVVWHHORU
rigid copper pigtails, mounting hardware, and CGA inlet connections. Systems available include simplex, MHV series
ZLWKÀH[LEOHVWDLQOHVVSLJWDLOV&0+9ZLWKULJLGFRSSHUSLJWDLOV0+(DQG&0+(VHULHVKHDGHUH[WHQVLRQV+HDGHUVDUH
RUGHUHGLQRUF\OLQGHUFRQ¿JXUDWLRQVWRDUULYHDWWKHGHVLUHGQXPEHURIF\OLQGHUV&XVWRPFRQ¿JXUDWLRQVDUHDOVR
DYDLODEOHIRU8VKDSHGDQG/VKDSHGWRPHHW\RXUVSDFHUHTXLUHPHQWV+HDGHUVDUHDYDLODEOHZLWKDQRSWLRQDOPDQLIROG
regulator. To order, add an R to the type of manifold ex. GMA-MHVR-540-02.
&RQ¿JXUDWLRQ6\VWHPVDUHDYDLODEOHLQWKUHHGLIIHUHQWEDVLFFRQ¿JXUDWLRQVIRURUF\OLQGHUVHFWLRQV)LYHLQFKFHQWHUWRFHQWHU
spacing is standard. To order 90 degree elbow sections separately, specify GMF-3710. See page 70.
HOW TO ORDER
11.
Start with Blank Header
Machined.
Not brazed joints.
Machined.
Not brazed joints.
3/8 NPT
1 - 111/2 NPS Thread
for expansion
3/8 NPT
both sides
GMA4
GMA2
(4 port - Crossover)
(2 port)
GMA3
GMA6
(3 port)
(6 port - Crossover)
over)
22.
33.
Choose Inlet
MHV = Master Header Valve
Choose Gas
Male Outlets
Female Outlets
CGA 300 - Ethyl Chlorides (formerly Acetylene)
CGA 320 - Carbon Dioxide
CGA 326 - Nitrous Oxide
CGA 346 - Air
CGA 350 - Hydrogen
CGA 540 - Oxygen
CGA 555 - Propane
CGA 577 - Oxygen
CGA 500 - Medical Mixtures
CGA 510 - Acetylene
CGA 580 - Inert Gases
CGA 590 - Sulfur HexaFlouride (formerly Industrial Air)
2
CONFIGURED
MANIFOLD
EXAMPLE
MHE = Master Header Extension
* Pigtails sold separately
For check valve outlets add “CV” after CGA number
1
3
1
2
3
*0$MHE&9
3 Cylinder CGA 540 with Header Extension and check valve outlets
68
www.superiorprod.com
HEADERS & OPEN STYLE MANIFOLDS
GAS MANIFOLD ASSEMBLIES
ORDERING INFORMATION:
(DFKPDQLIROGSDUWQXPEHUFRQVLVWVRIIRXUVHFWLRQV7KH¿UVWVHFWLRQGHQRWHVD*DV0DQLIROG$VVHPEO\*0$7KH
VHFRQGVHFWLRQGHQRWHVWKHW\SHRIPDQLIROGDQGLWVFRQ¿JXUDWLRQRQO\IRUGXSOH[PDQLIROGVRWKHUZLVHGRQRWXVH
FRQ¿JXUDWLRQQXPEHU7KHWKLUGVHFWLRQGHQRWHVWKH&*$QXPEHURUW\SHRIJDVDQGWKHODVWVHFWLRQGHQRWHVWKH
number of outlets or cylinders. The example below is for a twelve cylinder Oxygen duplex manifold in a standard
FRQ¿JXUDWLRQZLWKRXWOHWDGDSWRUZLWKFKHFNYDOYHVLQVWHDGRIKHDGHUYDOYHV
GMA
*DV0DQLIROG$VVHPEO\
-
Type of Manifold
6'6LPSOH'XSOH[0DQXDO
606LPSOH[0DQXDO
'0'XSOH[0DQXDO
+(/+HDGHU([WHQVLRQOHIWVLGH
+(5+HDGHU([WHQVLRQULJKWVLGH
DM
-
540CV
-
12
7\SHRI0DQLIROG&RQ¿JXUDWLRQ&*$1XPEHU 1XPEHURI&\OLQGHU2XWOHWV
Type of&RQ¿JXUDWLRQType of Gases
6WDQGDUG&RQ¿JXUDWLRQ
&URVVRYHU&RQ¿JXUDWLRQ
/6KDSHG&RQ¿JXUDWLRQ
86KDSHG&RQ¿JXUDWLRQ
6WDJJHUHG&RQ¿JXUDWLRQ
&RPPHUFLDO$FHW\OHQH$FHW\OHQH3URSDQH
&DUERQ'LR[LGH
2[\JHQ
1LWURXV2[LGH
1LWURJHQ+HOLXP$UJRQ
$LU
,QGXVWULDO$LU
+\GURJHQ
SIMPLE DUPLEX MANIFOLDS
The simple duplex manifold is an economical system with a two
cylinder capacity, one per side. The unit is furnished with two
header valves and two pigtails with check valves or two outlet
adaptors with check valves and two regular pigtails, 1/2" NPT
tee, a union and a mounting bracket. Manifolds for Acetylene
JDVZLOOLQFOXGHSLJWDLOVZLWKGU\W\SHÀDVKEDFNDUUHVWRUV
GMA-SD-320-02
GMA-S
SIMPLEX MANIFOLDS WITH MANUAL CONTROLS
The simplex manifold has a master shut off valve with a single
row of cylinder modules. Each module consists of 1/2" piping,
1/2" tees, header valves and pigtails with check valves or outlet
adaptors with check valve and regular pigtails, a union, a CGA
end plug and mounting brackets. The last module willll have a
plug and chain connected to an adaptor that allows for
fo
or future
H[SDQVLRQ3URSHU&*$¿WWLQJVZLOOEHIXUQLVKHGIRUWKHVSHFL¿HG
VSHFL¿HG
gas. Manifolds for Acetylene gas will include a Hydraulic
ulic Flash
Arrestor and pigtails with dry type arrestors.
GMA-SM-346-02
MANIFOLD HEADER EXTENSION ASSEMBLIES
Header extensions are shipped ready for addition to
existing manifolds. Unit includes CGA inlet, CGA end
plug, 1/2" piping, 1/2" tees, header valves and pigtails
with check valves or outlet adaptors with check valves and
ÀH[LEOHSLJWDLOVDQGDPRXQWLQJEUDFNHW7KHODVWPRGXOH
will have a plug and chain connected to an adaptor that
allows for future expansion. Specify right side extension
(HER) or left side extension (HEL).
Call
GMA-HER-540-02
for more information or to place an order ‡ZZZVXSHULRUSURGFRP
69
HEADERS & OPEN STYLE MANIFOLDS
DUPLEX MANIFOLDS WITH MANUAL CONTROLS
The duplex manifold has two master shut off valves allowing replacement of the exhausted bank of cylinders while the full
bank of cylinders is in operation. The center section accommodates a single regulator. The manifold is shipped with 1/2"
piping, 1/2" tees, header valves and pigtails with check valves or adaptor outlets with check valve and regular pigtails,
a union, a CGA end plug and mounting brackets are included with each module. Modules are furnished with a plug and
FKDLQRQWKHODVWPRGXOHWKDWDOORZVIRUIXWXUHH[SDQVLRQ3URSHU&*$¿WWLQJVZLOOEHIXUQLVKHGIRUVSHFL¿HGJDV0DQLIROGV
for Acetylene gas will include a Hydraulic Flash Arrestor and pigtails with dry type arrestors.
GMA-DM-580-04
BRASS MANIFOLD PIPE AND PIPE FITTINGS
Fittings Are Machined From CDA-360 Brass, Stress Relieved and Cleaned For Oxygen Service
PIPE ELBOWS
GMF-301
GMF-3011
3,000 PSI
GMF-3012
PIPE CROSSES
3,000 PSI
GMF-3013
GMF-3043
GMF-3041
G
GMF-3042
Part No.
Ref. A
Ref. B
Ref. F
GMF-3011
GMF-3012
GMF-3013
1/2"-14 NPT 1/2"-14 NPT 1-5/16"
1/2"-14 NPT .843"-.847" 1-5/16"
.843"-.847" .843"-.847" 1-5/16"
Ref.G
rt No
Part
No.
3/4"
3/4"
3/4"
GMF-3041
GMF-3042
GMF-3043
Ref
Ref. A
Ref. B
Ref.C & D
1/2"-14 NPT 1/2"-14 NPT 1/2"-14 NPT
.843"-.847" 1/2"-14 NPT 1/2"-14 NPT
.843"-.847" Slip Thru 1/2"-14 NPT
PIPE TEES
GMF-3021
70
Ref.E
1-1/2"
1-1/2"
1-1/2"
3,000 PSI
GMF-3023
GMF-3022
Part No.
Ref. A
GMF-3021
GMF-3022
GMF-3023
1/2"-14 NPT 1/2"-14 NPT 1/2"-14 NPT 1-1/2"
1/2"-14 NPT 1/2"-14 NPT .843"-.847" 1-1/2"
.843"-.847" 1/2"-14 NPT 1/2"-14 NPT 1-1/2"
Ref. B
Ref. C
Ref.E
GMF-3034
GMF-3033
Part No.
Ref. A
Ref. B
Ref. C
GMF-3033
GMF-3034
.843"-.847"
.843"-.847"
Slip Thru
Slip Thru
1/2"-14 NPT 1-1/2"
.843"-.847" 1-1/2"
www.superiorprod.com
Ref. E
MANIFOLD FITTINGS & PIPING
3,000 PSI
PIPE NIPPLES, THREADED ENDS
PIPE LENGTHS, PLAIN ENDS
-Cleaned For Oxygen Service
-Suitable For Acetylene
-Machined From CDA 360 Brass
-Cleaned For Oxygen Service
-Suitable For Acetylene
-Made From CDA 360 Brass
-Special Lengths Available
8SRQ5HTXHVW
GMF-3214
GMF
3214
Part No.
Thread Size Length
GMF-3211
GMF-3212
GMF-3213
GMF-3214
GMF-3215
GMF-3216
1/2"-14 NPT
1/2"-14 NPT
1/2"-14 NPT
1/2"-14 NPT
1/2"-14 NPT
1/2"-14 NPT
1-1/2"
2"
4"
6"
9-3/4"
12-3/4"
GMF-3224
Part No.
Pipe Size
Length
GMF-3222
GMF-3223
GMF-3224
GMF-3225
GMF-3226
1/2" Nom.
1/2" Nom.
1/2" Nom.
1/2" Nom.
1/2" Nom.
2"
4"
6"
9-3/4"
12-3/4"
PIPE LENGTHS, PLAIN ENDS
UNION 900
-127&/($1(' For Oxygen Service
-Suitable For Acetylene
-Made From CDA 360 Brass
GMF 3710
GMF-3710
P Part No.
UNION PLUG
Part No.
GMF-3236
GMF-3237
Thread
Pipe Size
Length
1/2" Nom.
1/2" Nom.
6 FT.
12 FT.
NOTE: GMF-3237 Must ship via Common Carrier
GMA-RH-PLUG 1"-11-1/2 NPS RH-INT.
GMA-LH-PLUG 1"-11-1/2 NPS LH-INT.
UNION NIPPLES
UNION NUTS
Part No.
GMF-3311
GMF-3312
GMF-3326
Thread
1"-11-1/2 NPS RH-INT.
1"-11-1/2 NPS LH-INT.
GMF-3311
Part No.
Thread
GMF-3321
GMF-3326
3/8"-18 NPT
1/2"-14 NPT
Length
2.40"
2.94"
UNION BUSHINGS
GMF-3333
GMF-33
3
UNION BUSHINGS WITH FILTER
Part No.
Thread
3,000 PSI
UNION BUSHINGS WITHOUT FILTER
Pipe Thread Length
GMF-3333
GMF-3334
GMF-3337
GMF-3338
1"-11-1/2 NPS RH
1"-11-1/2 NPS RH
1"-11-1/2 NPS LH
1"-11-1/2 NPS LH
GMF-3341
GMF-3342
Replacement Filter
Replacement Snap-Ring
Call
GMF-3332
G
GM
3/8"-18 NPT
1/2"-14 NPT
3/8"-18 NPT
1/2"-14 NPT
3.125"
2.187"
3.125"
2.187"
Part No.
GMF-3331
GMF-3332
GMF-3335
GMF-3336
Thread
1"-11-1/2 NPS RH
1"-11-1/2 NPS RH
1"-11-1/2 NPS LH
1"-11-1/2 NPS LH
3,000 PSI
Pipe Thread Length
3/8"-18 NPT
1/2"-14 NPT
3/8"-18 NPT
1/2"-14 NPT
for more information or to place an order ‡ZZZVXSHULRUSURGFRP
3.125"
2.187"
3.125"
2.187"
71
LINE STATION DROPS, LINE STATION VALVES & BALL VALVES
LINE STATION DROPS & LINE STATION VALVES
200 PSI
Part No.
Gas Service
GMA-SSD-022V-01
GMA-SSD-022V-02
GMA-SSD-023V-01
GMA-SSD-023V-02
GMA-SSD-024V-01
GMA-SSD-024V-02
GMA-SSD-025V-01
GMA-SSD-025V-02
Oxygen
Oxygen
Fuel Gas
Fuel Gas
Oxygen
Oxygen
Fuel Gas
Fuel Gas
No. Of Outlets
Single
Double
Single
Double
Single
Double
Single
Double
Part No.
Operating
Pressure
GMV-1024
GMV-1025
200 psi
200 psi
Outlet Size
9/16"-18 RH "B" size valve
9/16"-18 RH "B" size valve
9/16"-18 LH "B" size valve
9/16"-18 LH "B" size valve
7/8"-14 RH "C" size valve
7/8"-14 RH "C" size valve
7/8"-14 LH "C" size valve
7/8"-14 LH "C" size valve
CGA
Outlet
Valve Inlet
CGA-024
CGA-025
1/2"-14 NGT
1/2"-14 NGT
GMV-1024
Inlet & Outlet size
1/4” female NPT
1/2” female NPT
3/4” female NPT
GMV-1025
Part No.
BALL
VALVES
GMV-334
GMV-338
GMV-3312
MANIFOLD VALVES
M
Brass body, hot forged brass ball valve, 600 psi rated
Safe for use with acetylene
MASTER SHUT-OFF VALVES
* = Residual Pressure Valve
3,000 PSI
No Safety Relief Devices
GMV-1580
Part No.
-Forged Brass Body
-PTFE Packing
-Kel-F Seat
GMV-1001
GMV-1341
Part No.
Inlet
Outlet
GMV-1001 1/2"-14 NPT
1/2"-14 NPT
GMV-1341 1"-11-1/2 NPS RH-EXT 1"-11-1/2 NPS RH-INT.
GMV-1300
GMV-1320
GMV-1326
GMV-1346
GMV-1350
GMV-1510
GMV-1540
GMV-1580
GMV-1590
GMV-3346
GMV-3350
GMV-3540
GMV-3540RPV*
GMV-3580
GMV-3580RPV*
GMV-3660SS
GMV-3680
GMV-3702
GMV-1540
Operating
Pressure
CGA
Outlet
250 psi
3,000 psi
3,000 psi
3,000 psi
3,000 psi
250/500 psi
3,000 psi
3,000 psi
3,000 psi
3,000 psi
3,000 psi
3,000 psi
3,000 psi
3,000 psi
3,000 psi
3,000 psi
4,700 psi
6,400 psi
CGA-300
CGA-320
CGA-326
CGA-346
CGA-350
CGA-510
CGA-540
CGA-580
CGA-590
CGA-346
CGA-350
CGA-540
CGA-540
CGA-580
CGA-580
CGA-660
CGA-680
CGA-702
* Residual Pressure Valve
SS = Stainless Steel
72
www.superiorprod.com
Valve Inlet
1/2"-14 NGT
1/2"-14 NGT
1/2"-14 NGT
1/2"-14 NGT
1/2"-14 NGT
1/2"-14 NGT
1/2"-14 NGT
1/2"-14 NGT
1/2”-14 NGT
3/4”-14 NGT
3/4”-14 NGT
3/4”-14 NGT
3/4”-14 NGT
3/4”-14 NGT
3/4”-14 NGT
3/4”-14 NGT
3/4”-14 NGT
3/4”-14 NGT
warranty
LIMITED WARRANTY
WARRANTY:
The manufacturer warrants the products sold hereunder to be free
from defects in material and workmanship at the date of shipment.
Please note the distinction between “defects” and “damage” as used
in this warranty: defects are covered because we, the manufacturer,
are responsible: however, we have no control over damage caused
by such things as misuse or improper installation. Therefore, damage
for any reason is not covered under this warranty.
WHAT THE MANUFACTURER WILL DO:
,I\RXWKH%X\HUPHHWWKHHOLJLELOLW\UHTXLUHPHQWVDQGREOLJDWLRQV
listed below, then we shall, within thirty (30) days of receipt of a
timely claim and the parts claimed to be defective, inspect the
parts and repair or replace, at our option, any parts
which we determine were defective at the time of shipment from us.
However, if we determine that the parts were defective and
also that circumstances are such as to prevent us from remedying the
warranted defects by repair or replacement, then we may at our
option, refund you the purchase price of the parts.
ELIGIBILITY REQUIREMENTS & OBLIGATIONS OF BUYER:
You are eligible to obtain service under this warranty if you are the
original consumer purchaser, either from us directly or from a seller
who stocks our product for resale. However, in order for you to
obtain service under this warranty, you must do the following:
1. Send a claim in writing along with samples of the parts
claimed to be defective to us freight prepaid.
2. Have your claim and sample parts delivered within ninety (90)
days from the date of shipment of the parts from our factory.
However, if you bought the parts for resale, or if you bought
the parts from someone who bought them for resale, then you
must deliver the claim and the parts to us within ninety (90)
days from the date of re sale–except under no circumstances
shall we honor any claim which fails to be delivered to us with the parts
within one hundred and eighty (180) day from the date of
shipment of the parts from our factory.
Your claim should be in typed or printed form and include the following information:
1. Your name and address; and
2. The name and address of the seller of the parts; and
3. The date of purchase of the parts; and
4. A short description of the alleged defect; and
5. Proof of the purchase of the parts, for example, a receipt or canceled check.
WHAT IS NOT COVERED UNDER THIS WARRANTY (LIMITATION OF LIABILITY):
As stated above, damage for any reason is not covered under this warranty. Furthermore NO OTHER WARRANTY,
WHETHER EXPRESS OR IMPLIED, INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE, SHALL EXIST IN CONNECTION WITH THE SALE OR USE OF OUR
PRODUCTS. However, some states do not allow limitations on how an implied warranty lasts, so this limitation
may not apply to you. Also, since this is a limited warranty, WE SHALL NOT, UNDER ANY CIRCUMSTANCES, BE
LIABLE FOR ANY OTHER CHARGES, LABOR COSTS, OR ANY OTHER INCIDENTAL OR CONSEQUENTIAL
LOSSES OR DAMAGES OF ANY KIND OR DESCRIPTION WHATSOEVER ARISING OUT OF, OR IN ANYWAY
RELATING TO, ANY BREACH OF THIS WARRANTY OR CLAIMED DEFECT IN, OR NON-PERFORMANCE OF,
OUR PRODUCTS. +RZHYHUVRPHVWDWHVGRQRWDOORZWKHH[FOXVLRQRUOLPLWDWLRQRILQFLGHQWDORUFRQVHTXHQWLDO
damages, so this limitation or exclusion may not apply to you. This warranty also excludes commercial and
other non-consumer purchasers other than the original consumer purchaser.
WE HAVE NO AGENTS:
We do not authorize any person to create for us any obligation of liability in connection with our products.
LEGAL RIGHTS:
7KLVZDUUDQW\JLYHV\RXVSHFL¿FOHJDOULJKWVDQG\RXPD\DOVRKDYHRWKHUULJKWVZKLFKYDU\IURPVWDWHWRVWDWH
(province to province in Canada).
Your claim, along with the sample part or parts, should be sent to:
Superior Products, LLC.
3786 Ridge Road
Cleveland, Ohio 44144-1175
ATTN: QCA DEPT.
Retail Price $8.00
Superior
Products, LLC
Industrial
Call
Hospital
Specialty
Engineering
for more information or to place an order ‡ZZZVXSHULRUSURGFRP
V
VISIT WWW.SUPERIORPROD.COM
TO LEARN MORE ABOUT OUR OTHER PRODUCT LINES
Medical Gas Fittings and Accessories
‡&\OLQGHU)LWWLQJV5HJXODWRU
‡'HPDQG9DOYHV
‡',66)LWWLQJV
‡4XLFN&RQQHFWRUV
((DISS, Ohmeda, Chemetron, Puritan, Oxequip)
‡'XSOH[RU&RXSOHUV
‡)ORZPHWHUV
‡*DXJHV
‡+RVHV
‡+RVH)LWWLQJVDQG$FFHVVRULHV
L
‡3LJWDLOV
‡1373LSH)LWWLQJV
‡9DOYHV
‡<&RQQHFWRUV
‡<RNHV
Macro Technologies LNG Fueling Systems
‡
‡
‡
‡
CryoMac2TM LNG Fueling Nozzles
Cryogenic hoses for LNG Fueling
Quick disconnect vent couplers
Breakaway couplings
‡
‡
Tank receptacle
Receptacle cap
ZZZPDFURWHFKQRORJLHVFRP
Industrial
Hospital
Specialty
Engineering
3786 Ridge Rd. | Cleveland, OH | 44144 | Ph. 800-651-9490 | Fx. 216-651-4071
Catalog 18 - 2/17/2014