Default Menu Functions
Use selection keys on the left of the screens to chose functions.
General Description .
ATM Saving Banking machine with clock , the features as the following:
Real time clock & date.
Alarm time .
12/24-hour format .
4-digit PIN code security system.
Target Savings function.
Coins Deposit function.
Notes Deposit function.
Balance Checking & Withdrawal.
Happy Birthday & Merry Christmas music will be heard for these special day.
Function
Button
LED Light Panel
Screen
Balance
Setting Alarm Clock:
ATM card is not required for this function.
To set alarm press CODE/ALARM button. Alarm time will appear on LCD
clock screen. Press and to hold the
button for 2 seconds, you will hear
a beep sound and time column will start to flash. Using the
up
down
and
sideways arrows on the keypad to set the hour and minutes, Then
press
to comfirm.
Speaker
Target
Check Balance
Go to Default Menu and press BALANCE selection key. The following screen
will display your current balance. To return to Default Menu press any key
corresponding to a blank screen. If no key is pressed for 10 seconds, screen
will return automatically to Default Menu .
Balance
Coin slot
Cash door
OPEN button
Sound On / Off
ATM card is not required for this function. SOUND ON / OFF function can only be
adjusted when ATM Bank in Standby mode.
To adjust sound mode press
button. The screen will display sound
mode either ON or OFF. Press
button again to change mode displayed.
Notes Feeder
When in SOUND OFF mode, all announcements, melodies and sound
( except for clock alarm ) will be deactivated. The alarm will still function when
the alarm is activated.
Money Vault Door
Keypad
ATM card
Go to Default Menu and press TARGET. Select SET TARGET , enter
target amount and press ENTER. The screen will return to TARGET menu
automatically. If no other selection is pressed for 10 seconds, the screen
will return to Default Menu automatically.
Traget
Note: The alarm clock will only be functioned when the ALARM mode is “ ON ”.
In Alarm mode press
up and
down keys to set the ALARM ON or
OFF display in the functions screen. The bell symbol will appear on LCD clock screen
when alarm is “ON”.
Alarm will sound for 1 minute. Press any key to stop alarm.
ATM card slot
Deposit Button
Keypad
withdrawal
Setting Target
COINS : To deposit coins, simply insert the coins to the Coin Slot. The coin
Slot will recognizes the amount of each coin and count it into the balance. A
real coin dropping sounds will be heard when you deposit the coins.
Note: The ATM Bank will accept coins of :10p, 2p, 50p, 20p, 1p, 5p, 1, 2
NOTES: To deposit a note , press DEPOSIT key, LCD display text DEPOSIT
and then insert the notes to the Note Feeder, it will be rolling into the bank
automatically and LCD will display NOTE when the note rolling into the bank.
Press the buttons on the keypad to input the note value when LCD displays
ENTER AMOUNT, and then process ENTER to confirm.
And it will be counted into the balance.
NOTE: The ATM Bank will accept notes of : 5, 10, 20, 50.
Set Up
Note 1: Reaching target announcement will be shown on LCD when target is
reached. If no other action is made or blank selection key is
pressed for 5 seconds the screen will return to MAKE DEPOSIT
screen. If no further action is made for 5 seconds or blank selection
key is pressed the screen will return to Default Menu.
Note 2: Maximum target set is “999.99” pound.
Note 3: To check your target press SHOW TARGET on TARGET menu.
Note 4: To check balance owing to target amount press OWE TARGET
on TARGET menu. Owe target announcement will be shown on LCD.
Miscellaneous.
STANDBY MODE: ATM Bank will return to standby mode when card is removed.
If card is not removed and no key is pressed for 3 minutes
the ATM Bank will automatically be reverted to standby mode.
CHANGING PIN CODE: Activate ATM Bank with existing pin code then press
button for 2 seconds then repeat steps
outlined in instructions above for Creating New
Pin code.
Insert card and follow instructions on the screen.
Enter factory default pin code “0000” and then press ENTER to confirm.
Make Withdrawal
Installing The Batteries .
Entering your Name:
Using keypad enter your name by pressing
button after each letter to save.
THE ATM Bank runs on total of 3 AA batteries.
Insert 3 AA batteries into the battery compartment as
indicated by the polarity symbols ( + and -) marked inside .
Replace the cover and secure with the screw.
Go to Default Menu and press WITHDRAW selection key. Enter amount
on the amount screen then Press
The red open button will start
to light up. Press lighting button to open ATM door and to take the money
which is equivalent to the entered withdrawal amount value. The screen
will automatically go back to Default Menu when door is closed.
Alarm will be “ON” if door is left open for more than 20 seconds.
Withdrawal
Eg. VERONICA.
V SET E SET R SET O SET N SET I SET C SET A SET then press ENTER to save.
Entering your birthdate :
Using the up down
and sideways
the keypad to set the date and month. Press SET to save.
arrows on
Note 1: Opening door mechanism can only be functioned when you make
withdrawal.
Note 2: Make sure the amount you withdraw is same as the amount that has
been entered otherwise the ATM will not show a correct balance.
Setting The Clock:
After installing the batteries, the LCD will display the date and time mode.
Creating New Pincode:
Using the key pad to enter your new pin code which must be made up of any
4 numbers and then press SET to save. Enter your new pin code again to reconfirm.
To set the date and time, press and hold the
button for 2 seconds. The date
column will start to flash. Using the
up and
down arrows
on the keypad to enter the date and move to the month column using the
sideway arrows. Repeat the above process to set the correct year, hour and minutes.
If all settings are correct, Press
to confirm all settings.Press the
button
to change the clock format to 12 hour or 24 hour mode. In the 12 hour format the
AM/PM will shown on the display.
Battery Precautions
1. Alkaline battery recommended.
2. Do not use rechargeable battery.
3. Non-rechargeable battery are not to be recharged.
4. Rechargeable accumulators / batteries are to be removed from the ATM
before being charged.
5. Rechargeable accumulators / batteries are only to be charged under adult supervision.
6. Different types of batteries or new and used accumulators / batteries are not to be mixed.
7. Only batteries of the same or equivalent type as recommended are to be used.
8. Batteries are to be inserted with the correct polarity.
9. Exhausted batteries are to be removed from toy.
10.The supply terminals are not to be shot-circuited.
CHANGING BATTERIES: The ATM must be reset after batteries have
been replaced. Press reset button at the back
of the ATM Bank then re-enter all data again.
Press ENTER to return to Default Menu after birthday and Merry
Chirstmas music.
ATM Bank FULL announcement has been set at 999.99 pound + first coin.
The announcement will activate at the drop of the first coin that will tip
the balance over 999.99 pound limit. At the end of the message screens
will display MAKE WITHDRAW 999.99 pound. Press ENTER then
press lighting red OPEN button. The ATM must be completely emptied*
so that balance will revert back to zero. ATM will not allow other functions
unless this procedure is followed. The ATM will automatically revert back
to Default Menu when door is closed.
Reset Key : If your ATM bank is not working properly or does not respond
to your input, press reset key on the back of the ATM bank.
All setting will clear, you must set the time, date, user name
and user birthday.
* Damage can be caused to you ATM Bank if continuously deposit
when the capacity of the ATM Bank is fill.
Model No. 2961