Project:
Type:
Ordering # :
Comments:
ARCHITECTURAL VANITY
MSE
LINEAR FLUORESCENT
• Steel Housing w/ White Powder Coat Finish
• Steel Mounting Pan w/ Hi-Reflectance White Powder Coat Finish
• Steel End Caps w/ White Powder Coat Finish
• Clear Acrylic Lens w/ Ribbed Sides and Prismatic Front
• Mounts Directly to Surface w/ Two Wall Anchors (Not Included)
• Integral EM Battery Available (3’ & 4’ Fixtures Only)
• Lamps Not Included
• Convenience Outlet & Pull Chain Available
• ETL Listed Damp Location
• The FS-505 is an External Motion Sensor Contained in an Attached Compartment
- To be Mounted Horizontally on Wall
(See Page 5 For Manufacturer Specific Application & Coverage Patterns.)
• The HFLUM2-WR is an Internal Microwave Motion Sensor
- May be Mounted on Wall or Ceiling
(See Page 6 For Manufacturer Specific Application & Coverage Patterns)
ORDERING INFORMATION
White is Standard Finish Example : (MD48232E - 120E - SDIM40 - MSE)
PRODUCT SOURCE/WATTAGE
Muirfield
24” Fixture
MD24117E - (1) 17W T8
MD24217E - (2) 17W T8
MD24214E - (2) 14W T5
Muirfield
36” Fixture
Muirfield
48” Fixture
MD36125E - (1) 25W T8
MD36225E - (2) 25W T8
MD36221E - (2) 21W T5
MD48132E - (1) 32W T8
MD48232E - (2) 32W T8
MD48228E - (2) 28W T5
VOLTAGE
120E - 120V Electronic
277E - 277V Electronic
347E - 347V Electronic
DIMMING CONFIG
SDIM10** - Lamps Set at 10% Output w/ No Occupancy & 100% Outout w/ Motion Sensor Occupancy Read
(See Pg. 3) (120V / 277V Only)
SDIM40** - Lamps Set at 40% Output w/ No Occupancy & 100% Outout w/ Motion Sensor Occupancy Read
(See Pg. 3) (120V / 277V Only)
SDIM50** - Lamps Set at 50% Output w/ No Occupancy & 100% Outout w/ Motion Sensor Occupancy Read
(See Pg. 3) (120V / 277V Only)
MS2B - 1 Lamp at 100% Constant
Output, and 1 Lamp Connected to
Motion Sensor (Requires 2 Ballasts)
Please Refer to Page 2 for Step-Dim &
MS2B Specifications, Options, and
Restrictions
FINISH
CH - Chrome Plated
SM - Matte Silver
TB - Textured Black
AC - Antique Copper
AS - Antique Silver
BT - Bronze Mist
CP - Copper
KC - Kenworth Chrome
SN - Sand
SW - Swedish Steel
BZ - Textured Bronze
TW - Textured White
RAL Colors or
Custom Match -
Consult Factory
OPTIONS
F - Fused (120V / 277V Only)
MSE - Watt-Stopper FS505 External Motion
Sensor (Will Add 1 11/16” to Fixture Depth)
MSI - Steinel HFLUM2-WR Internal Motion
Sensor (120V / 277V Only)
MSI is For Use With The Following:
- All 2 Lamp Wattages
EB - Integral Emergency Battery**
(For Use With MS2B Only)
(Consult Factory For
Application Specs / Battery Option)
TP - Tamper Resistant Screws
W2L - Wire 2 Lamps to Integral
Emergency Battery
(T8 Lamping Only)
MSP - Program Start Ballast
(Standard w/ Motion Sensor) ***
R E P L A C E M E N T PA R T S PA R T N O . N O T E S
24” Clear Acrylic Diffuser
36” Clear Acrylic Diffuser
48” Clear Acrylic Diffuser
30909
30907
30904
**Emergency Battery Options
Initial light output in Emergency mode will last for a minimum of 90 minutes. 1 lamp wired
unless ordered otherwise. The following are suitable for indoor and damp locations. Please
refer to Bodine’s specification sheet
EBW: Bodine’s B50 (Electronic) - Temperature Rating (Ambient) 32° F - 131° F
EBR: Bodine’s B30 (T8 Electronic) - Temperature Rating (Ambient) 41° F - 122° F
We reserve the right to revise the design or components of any product due to parts
availability or change in UL standards, without assuming any obligation or liability to modify any
products previously manufactured, and without notice.
*** For Electronic Wattage Fixtures Being Used in Conjunction With an Occupancy Sensor
(Either Provided by us, or Your Own System), a Program Start Ballast is Recommended in
Order to Maximize Lamp Life.
33 Donald Drive Fairfield, OH 45014 ph:(513)858-6004 fax:(513)858-6038 email:sales@teronlight.com web:teronlight.com

ARCHITECTURAL VANITY
MSE
Project:
Type:
Ordering # :
Comments:
• Step-Dimming is available at 10% and 40% for 25W and 32W T8 linear lamps
- Emergency Battery is not available for use with the 10% and 40% Step-Dim option
- Ballast used is the Robertson brand #PSL232T8MV3D
• Step-Dimming is available at 50% for 17W, 25W, and 32W T8 Linear Lamps
- Emergency Battery is available for use with the 50% Step-Dim option
- Ballast used is the Universal brand #B232PUS50-A
• Step-Dimming is available at 50% for 28W T5 Linear Lamps
- Ballast used is the Philips Advance brand #IOP-2S28-95-SC-SD
- Emergency Battery is available for use with the 50% Step-Dim option
• All 3 ballasts meet California’s Title 24 requirement by reducing power by 50% or more
R E P L A C E M E N T PA R T S
24” Clear Acrylic Diffuser
36” Clear Acrylic Diffuser
48” Clear Acrylic Diffuser
PA R T N O .
30909
30907
30904
We reserve the right to revise the design or components of any product due to
parts availability or change in UL standards, without assuming any obligation
or liability to modify any products previously manufactured, and without notice.
N O T E S
Emergency Battery Options
Initial light output in Emergency mode will last for a minimum of 90 minutes.
1 lamp wired unless ordered otherwise. The following are suitable for indoor
and damp locations. Please refer to Bodine’s specification sheet
EB:
Bodine’s B50 (Electronic) - Temperature Rating (Ambient) 32° F - 131° F
Bodine’s LP550 (T5 Electronic) - Temperature Rating (Ambient) 32° F - 122°F
33 Donald Drive Fairfield, OH 45014 ph:(513)858-6004 fax:(513)858-6038 email:sales@teronlight.com web:teronlight.com

HFLUM2-WR
Project Name:
Location:
HF LUM2-WR Specifications
Item No. 65122
Voltage 120/230/277 VAC, 50/60 Hz
Load Rating 0-800 watts @ 120 VAC, 50/60 Hz incandescent, magnetic or electronic ballasts - 1/4 HP
0-1200 watts @ 230/277 VAC, 50/60 Hz magnetic or electronic ballasts
0-650 watts @ 120/230/277 VAC, 50/60 Hz LED
Transmitter Power 1 mW
Power Consumption < 0.5 W
Time Delay Setting 30 seconds to 30 minutes
Light Level Setting 0.2-200 footcandles
2-2000 lux
HF System 5.8 GHz
Coverage 360° adjustable 3.3 to 26 ft reach (1 to 8 m)
Environment requires enclosure temperature -4° F - 185° F, -20° C - 85° C
Dimensions
(LxWxD)
4.2 x 1.7 x 1.8 in
107 x 42 x 44.5 mm
Warranty 5 years
Certifications C-UL-US Listed, RoHS Compliant,
Contains: FCC ID - W8J-SIR13, IC - 8529A-SIR13
The HFLUM2-WR is a line voltage occupancy sensor module that installs in a fixture, adding energy saving lighting control in each fixture location.
The HFLUM2-WR uses STEINEL’s High Frequency (HF) technology to turn lights on and off based on occupancy.
It works by emitting high frequency electromagnetic waves
(5.8 GHz) into the controlled area. Movement in the area causes a change in the waves’ echo, resulting in occupancy detection. The sensor can detect motion through many materials including glass and the lens of a fixture, enabling the sensor to be hidden from view.
Applications
Mounted in either a ceiling or wall lighting fixture, the sensor module is suited to a wide variety of interior spaces including offices, conference rooms and damp or wet locations when mounted inside sealed and gasketed fluorescent IP65 type fixtures.
Key Features:
• 360° coverage; reach is adjustable from 3.3 to 26 ft
• High frequency technology emits 5.8 GHz electromagnetic waves
• Built-in surge protection with auto-reset
• Lamp seasoning feature provides a simple and convenient 4 day burn in as recommended by lamp manufacturers
• Adjustable time delay and light level settings
• Light level feature allows lighting to remain off during daylight, regardless of occupancy (hold off)
• Wiring is streamlined with three terminals
Line Voltage High Frequency Technology 360˚ of Coverage Fixture Integrated 0.2 - 200 fc www.steinel.net

HF LUM2-WR
Controls
Sensitivity
Time delay
Light Level
Coverage
Typical mounting height is 8 to 10 ft
Photocell
Sensor dome antenna
Wire terminations
Mounting tabs
Mounting
3.3 - 26 ft
1 - 8 m
Coverage Adjustments Wiring
107 mm
4.2”
97 mm
3.8”
3.3 - 16.4 ft ca. 1 - 5 m
Mounting screw holes are 3.8 inches
(97 mm) apart
Sensitivity:
Adjusts coverage reach from approximately 3.3 feet to 26 feet
Time delay:
30 seconds to
30 minutes
Light level:
.2 (night) to 200
(day) footcandles
NEUTRAL
HOT
LOAD www.steinel.net (800) 852-4343 9051 Lyndale Avenue South, Bloomington, MN 55420 M-04105-1