KFKFSeriesFBallValves
Series P3 BallValves
Superior Fluid Control Products
KF Series P3 Trunnion Mounted Ball Valves
A large trunnion design ensures central positioning
under the highest working pressure. Independent
floating spring loaded seats provide a tight seal even at
low differential pressures. Service and maintenance is
simplified with a bolted body design incorporating
double O-rings or a combination of O-rings and gaskets, suitable for buried or above ground installation.
See page 6 for complete product offering.
General Design Features
• Three-piece body design
• Double block and bleed
• Trunnion supported design reduces operating torque
• Antistatic device for grounding of the ball, stem and body
• Two sets of O-rings plus firesafe stem packing prevents leakage
• Corrosion resistant low friction bearings
• Inconel seat springs
• Sealant injection fittings for emergency stem or seal sealing
• Direct mount topworks pad for actuator or gear operator
• API Spec Q1, 6D, 6FA and 607
• ASME Section III Div. 1-NCA 4000
• BS 5351, 5750 and 6755
• ISO 9001/9002
• CSA- Z245.15-01
• 6" & larger valves are equipped with lifting lugs
• Locking device (lock not included)
• NACE MR0175 /ISO15156
• Anti-blowout trunnion stem design
Contents
General Design Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Technical Seating Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Applicable Standards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Assembly Part Number Codes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Assembly Part Number Buttweld End Pipe Codes and Calculating Pipe Wall Thickness. . . . . . . . . . . . . . . . . . . . . . . . . . 7
Component Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-10
Dimensional Data. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-14
Weights. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Topworks & Stem Torque Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16-17
Engineering Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
2
KF Series P3 Ball Valves
Design Features
Anti-Blowout
Stem Design
Stem seal integrity is
achieved by the use of
three o-rings (or two
o-rings and a graphite
gasket). Upper o-ring
(or graphite gasket)
can be replaced with
the valve in line and
under pressure.
Emergency
Seat Seal
Emergency Sealant
Injection System
Special sealants may be
injected thru fittings that
are located on the
adapter flanges to restore
sealing integrity if seat
sealing surface is damaged. A second internal
check valve provides
backup to the fitting.
The Sealant Injection
System located on the
bonnet can be utilized
in case of emergencies,
o-ring damage, or if
stem leakage occurs.
Double Sealed
Envelope
Connections
HeavyDutyBearings
Double o-rings or a
combination of an
o-ring and firesafe
gasket on body/adapter
connections to ensure
positive sealing. This
makes the P3 suitable
for above or below
ground service.
Stem
Trunnions are supported
by heavy duty Teflon®
coated steel bearings.
Thrust load on the ball
is supported by large
trunnions mounted
within captured trunnion
blocks, resulting in low
operating torque and
seat wear.
6"-12" Cl. 900, 1500 & 2500
14"-24" Cl.150, 300 & 600
Antistatic Device
Ball
Gland
Flange
Heavy Duty
Bearings*
Heavy Duty
Bearings*
Ball
Heavy Duty
Bearings*
Trunnion
A spring between the
trunnion and the ball
or between the stem
and the gland plate
permits electrical
continuity between all
valve components.
*2"-12" Cl. 150, 300 & 600, 2"-4" Cl. 2500
KF Series P3 Ball Valves
3
Technical Seating Features
Double Piston Seat Design
Upstream Seat: Line Pressure acting on
the seat area (A1) does not equalize
against the line pressure acting on the
seat area (A2). The difference in the
area (D1) times the line pressure creates a “piston effect” force which
pushes the seat against the ball surface
resulting in a tight effective seal.
D2
A1
A4
Downstream Seat
PD-Line Pressure
D 2 = A4 - A 3
A3
CLOSED
BALL
FLOWLINE
PB=Body Cavity Pressure
D1
D1
A1
A1
A2
D1
A2
Downstream Seat: When the body cavity pressure is
greater than the downstream pressure, the body cavity
pressure acts on the seal area (A4). The net pressure difference, acting over area (D2), pushes the downstream
seat tightly against the ball creating a positive seal.
Upstream Seat
PL-Line Pressure
D1= A1-A 2
PB=Body Cavity Pressure
Upstream Seat
PL-Line Pressure
D1= A1-A 2
THE ULTIMATE BENEFIT OF USING THE “DOUBLE PISTON SEAT”
DESIGN: In case of upstream seat leakage, the downstream seat maintains a pressure assisted tight shut off by
sealing against the ball surface.
Downstream Seat
PD-Line Pressure
A2
CLOSED
BALL
FLOWLINE
Self Relieving Seat Design
Upstream Seat: The difference in the
area (D1) times the line pressure creates a “piston effect” which forces the
seat against the ball surface. Also the
springs behind the seat adds the force
to the seat which keeps the seat in
contact with the ball surface by providing the tight seal.
Downstream Seat: When the body cavity pressure exceeds the spring pressure, automatic pressure relief will occur by relieving the body cavity pressure
past the downstream seat. This eliminates the need for
the body relief valve.
Double Block and Bleed
The double block and bleed condition
is available in all seat design configurations. When the ball is in the closed
position the body cavity pressure may
be drained down to ‘zero’ by opening
the bleed valve and draining the fluid
by removing the drain plug. Each seat
works independently assuring tight
shut off seal against ball on the
upstream and downstream side.
4
KF Series P3 Ball Valves
Upstream Seat
PL-Line Pressure
PB=Body Cavity Pressure Is ZERO
Cavity Pressure
Is Drained Or Vented
To Atmosphere
CLOSED
BALL
FLOWLINE
Downstream Seat
PD-Line Pressure
KF Series P3 Applicable Standards
The following list contains the most important applicable standards for ball valves. KF valves may be designed,
manufactured and tested in accordance with other
international standards on request.
API-American Petroleum Institute
British Standard
6D
Specification for pipeline valves.
BS 1503
RP6F
Recommended practice for fire testing of valves.
Specification for steel forgings for pressure
purposes.
6FA
Specification for fire testing of valves.
BS 1504
598
Valve inspection and test.
Specification for steel castings for pressure
purposes.
605
Large diameter carbon steel flanges.
BS 1560
Steel pipe flanges and flanged fittings.
607
Fire test for soft seated quarter-turn valves.
BS 2080
Face-to-face, center-to-face, end-to-end, and
center-to-end dimensions of flanged and
butt welding end steel valves for the petroleum, petrochemical and allied industries.
ASME/ANSI-American National Standard Institute
B 16.5
Steel pipe flanges and flanged fittings.
B 16.10
Face-to-face and end-to-end dimensions
of ferrous valves.
BS 4504
Flanges and boltings for pipes, valves and
fittings.
B 16.25
Butt welding ends.
BS 5146
B 16.34
Steel valves- Flanged and butt welding ends.
Inspection and test of steel valves for the
petroleum, petrochemical and allied industries.
B 16.47
Steel Flanges.
BS 5351
B 31.3
Chemical plant and petroleum refinery piping
Steel ball valves for the petroleum,
petrochemical and allied industries.
B 31.4
Liquid petroleum transportation piping systems.
BS 5750
Quality system.
B 31.8
Gas transmission and distribution piping systems.
BS 6755
Testing of valves.
B 46.1
Surface texture.
MSS-Manufacturers Standardization Society
ASTM-American Society for Testing Materials
SP 6
Standard finishes for contact faces of pipe
flanges and connecting- end flanges of
valves and fittings.
ISO-International Organization for Standardization
SP 25
ISO 9001: Quality systems-Model for quality assurance
2000
in design/development, production,
installation and servicing.
Standard marking system for valves,
fittings, flanges and unions.
SP 45
Bypass and drain connection standard.
ISO 5211
NACE-National Association of Corrosion Engineers
Consult factory for details.
Topworks Mounting Dimensions
ISO 15156 For use in H2S containing environments
in oil and gas production.
MR0175
Sulfide stress cracking resistant metallic
materials for oilfield equipment.
KF Series P3 Ball Valves
5
KF Series P3 • Part Number Codes
2" FP- 36" FP, Class 150, 300, 600, 900, 1500 & 2500
Downstream Relieving
Seat Configuration
n
atio
gur
onfi
tC
tion
ec
onn
nd C
E
ea
&S
ess
all
dW
d En
kn
Thic
l
We
ial
ater ce
M
g
an
oltin nform
B
/
o
y
Bod ACE C
N
Trim
S
rt/F
se
at In
Se
l
eria
at
al M
Se
on
uati
Act
Double Piston Seat Configuration
Insert Type
4 • RF x WE
5 • RTJ x WE
1 • RF
2 • RTJ
3 • WE
J • RF x WE
K • RTJ x WE
F • RF
G • RTJ
H • WE
99 • No Weld End
XX • See Weld Chart page 7.
NACE** III, Cl. III Bolting
NACE** II, Cl. II Bolting
A • A105 /B7 (Black - Std.)*
B • SS/B7 (Xylan)
C • LF2/L7 (Black)
D • SS/ L7 (Xylan)
E • LF2 /B7 (Black)
L • A105/B7 (Xylan)
N • A105/B7M
P • SS/B7M (Xylan)
Q • SS/L7M (Xylan)
R • A105/B7M Cad
S • LF2/ L7M
T • SS/660SS
2 • 316SS
3 • 410SS or CA-15M
6 • CS w/ 3 mil ENP (Std. on 2" & larger)*
7 • LTCS (3 mil ENP)
A • Devlon® / FS (KF Std.)*
B • Teflon® / FS
C • PEEK™ / FS
A • James Walker Viton®
F • ELAST-O-LION 985
G • HNBR (Std.)
2 • Viton® A
4 • EPDM
5 • AFLAS®
4 • Locking Handle (Std. on 2" thru 4" bore)*
6 • Locking Gear Operator (Std. on 6" bore and larger)*
9 • Bare Stem
A • For Actuator
Process Codes
(Last two digits used ONLY when Process Codes are required).
Assembly
Base
Number
VXXX - X XX X X X X X XX
Devlon® is a registered trademark of Devol Engineering, Ltd.
Teflon® is a registered trademark of DuPont.
PEEK™ is a trademark of Victrex Plc.
Viton® is a registered trademark of DuPont Dow Elastomers.
Aflas® is a registered trademark of Asahi Glass.
**Nace indicates compliance to NACE MR0175
Asterisk ( * ) in lieu of dash ( - ) in Assembly Part Number
indicates customer requires source inspection.. (i.e. VXXX * XXXXXXXXXX)
*STANDARD TRIM CONFIGURATION
Series P3 Assembly Base Numbers, 2" FP - 36" FP
Class
Size (in.)
8 FP
10 RP
2 FP
3 RP
3 FP
4 RP
4 FP
6 RP
6 FP
8 RP
150
300
600
900
V111
V211
V311
V411
V112
V212
V312
V412
V113
V213
V313
V413
V114
V214
V314
V414
V115
V215
V315
V415
V116
V216
V316
V416
V117
V217
V317
V417
V118
V218
V318
V418
V119
V219
V319
V419
1500
2500
V511
V611
V512
V612
V513
V613
V514
V614
V515
V615
V516
V616
V517
V617
V518
V618
150
300
600
900
16 FP
V127
V227
V327
V427
18 FP
V129
V229
V329
V429
20 RP
V130
V230
V330
V430
20 FP
V131
V231
V331
V431
22 FP
V133
V233
V333
—
24 RP
V134
V234
V334
V434
24 FP
V135
V235
V335
V435
1500
V527
V529
V530
V531
—
—
V535
Class
10 FP
12 RP
12 FP
14 RP
14 FP
16 RP
V120
V220
V320
V420
V121
V221
V321
V421
V122
V222
V322
V422
V123
V223
V323
V423
V124
V224
V324
V424
V125
V225
V325
V425
V126
V226
V326
V426
V519
V619
V520
V620
V521
V621
V522
V622
V523
V623
V524
—
V525
—
V526
—
Size (in.)
26 FP
V137
V237
V337
V437
28 FP
V139
V239
V339
V439
30 RP
V140
V240
V340
V440
30 FP
V141
V241
V341
V441
32 FP
V143
V243
V343
V443
34 FP
V145
V245
V345
V445
36 RP
V146
V246
V346
V446
36 FP
V147
V247
V347
V447
—
—
—
—
—
—
—
—
Note: Shaded items are not available at this time. (Consult factory for verification)
6
KF Series P3 Ball Valves
KF Series P3 Buttweld End Pipe Code
Pipe Wall Thickness Codes for Assembly Part Number
Pipe
Description
2
Outside Dia. (in.)
(STD) Standard
Schedule 40
XS
Schedule 80
Schedule 160
XXS
—
.154
.218
.218
.343
.436
Pipe
Description
14
Outside Dia. (in.)
(STD) Standard
Schedule 40
XS
Schedule 80
Schedule 160
XXS
Code
3
2.375
Code
3.500
—
08
15
15
31
37
Code
14.000
.375
33
.438
38
.500
39
.750
50
1.406
70
—
—
—
.216
.300
.300
.438
.600
—
14
24
24
38
44
16
Code
16.000
.375
33
.500
39
.500
39
.843
52
1.593
75
—
—
Nominal Pipe Size (in.)/KF Schedule Code
4
Code
6
Code
8
Code
4.500
6.625
8.625
.237
17
.280
22
.322
28
.237
17
.280
22
.322
28
.337
30
.432
36
.500
39
.337
30
.432
36
.500
39
.531
40
.718
49
.906
55
.674
47
.864
53
.875
54
Size (in.)/KF Schedule Code
Code
20
Code
18.000
20.000
.375
33
.375
33
.562
42
.593
43
—
—
—
—
.937
56
1.031
59
1.781
78
1.968
82
—
—
—
—
18
22
Code
22.000
.375
33
—
—
0.500
39
1.125
62
—
—
—
—
10
Code
10.750
.365
32
.365
32
.500
39
.593
43
1.125
62
1.000
58
12
Code
12.750
.375
33
.406
35
.500
39
.687
48
1.312
68
1.000
58
24
Code
24.000
.375
33
.687
47
—
—
1.218
65
2.343
85
—
—
Consult factory for other wall thicknesses.
Calculating Pipe Wall Thickness
Pipe Outside Dia. (O.D.)
To find the “Pipe Wall Thickness” for buttweld valves, subtract the Inside Diameter
from the “Pipe Outside Diameter” for the appropriate size, listed to the right. Then
divide the outcome by two (2).
EXAMPLE: For a 4" valve with a 3.826 Inside Diameter:
Outside Diameter
taken from the chart
at right
Inside Diameter
Given by Customer
4.500 – 3.826
2
= .337
Size (in.)
2
3
4
6
8
10
12
14
16
18
20
24
in.
2.375
3.500
4.500
6.625
8.625
10.750
12.750
14.000
16.000
18.000
20.000
24.000
mm
60.33
88.90
114.30
168.28
219.08
273.05
323.85
355.60
406.40
457.20
508.00
609.60
Once you have determined the “Pipe Wall Thickness”, find that number in the chart
above. The two-digit number to the left should then be used in the “Pipe Wall
Thickness” digits of the valve Assembly Part Number. In this example that would be 30.
KF Series P3 Ball Valves
7
KF Series P31 • Component Parts • 2", 3" & 4" Class 600, 900, 1500 & 2500
26
8
24
2
9
19
25
36
18
30
3
18
28
12
22
5
20
21
30
31
43
42
10
14
36
15
23
4
7
21
7
20
1
22
12
28
11
13
16
9
17
6
2
24
42
43
29
31
27
30
Parts List, KF P3 1
Part No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
8
Description
Body
Adapter
Bonnet
Ball
Stem
Lower Trunnion
Seat Assembly
Top Cover
Seat Springs
Stem Bearing
Lower Trunnion Bearing
Adapter Primary Seal
Adapter Sub-Seal
Bonnet Primary Seal
Bonnet Sub-Seal
Lower Trunnion Primary Seal
Lower Trunnion Sub-Seal
Stem Seal
KF Series P3 Ball Valves
Part No.
19
20
21
22
23
24
25
26
27
28
29
30
31
32
34
36
42
43
Description
Stem Sub-Seal
Seat Seal
Seat Seal Backup
Seat Sub-Seal
Stud, Body
Nut, Body
Cap Screw, Bonnet
Cap Screw, Top Cover
Cap Screw, Lower Trunnion
Thrust Bearing
Bleed/Drain Valve
Injection Fitting
Ball Check
Drain Plug
Key
Alignment Pin, Bonnet
Antistatic Pin
Antistatic Spring
KF Series P32 • Component Parts • 6"-12", Class 600
8
26
25
19
24
36
2
15
18
30
9
13
12
22
31
3
34
21
30
28
5
20
41
14
40
10
36
15
23
4
7
7
1
21
29
20
28
22
16
11
6
12
13
17
9
42
2
24
43
27
31
30
Parts List, KF P3 2
Part No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
Description
Body
Adapter
Bonnet
Ball
Stem
Lower Trunnion
Seat Assembly
Top Cover
Seat Springs
Stem Bearing
Lower Trunnion Bearing
Adapter Primary Seal
Adapter Sub-Seal
Bonnet Primary Seal
Bonnet Sub-Seal
Lower Trunnion Primary Seal
Lower Trunnion Sub-Seal
Stem Seal
Part No.
19
20
21
22
23
24
25
26
27
28
29
30
31
32
34
36
42
43
Description
Stem Sub-Seal
Seat Seal
Seat Seal Backup
Seat Sub-Seal
Stud, Body
Nut, Body
Cap Screw, Bonnet
Cap Screw, Top Cover
Cap Screw, Lower Trunnion
Thrust Bearing
Bleed/Drain Valve
Injection Fitting
Ball Check
Drain Plug
Key
Alignment Pin, Bonnet
Antistatic Pin
Antistatic Spring
KF Series P3 Ball Valves
9
KF Series P33 • Component Parts • 6"-12", Class 900, 1500 & 2500
14" & Larger, All Classes
46
6
46
10
36
26
4
11
7
12
8
13
9
2
9
22
20
25
19
30
3
18
15
5
14
2
11
10
20
22
7
32
28
46
6
46
34
31
30
13
12
24
23
1
29
23
24
Parts List, KF P3 3
Part No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
Description
Body
Adapter
Bonnet
Ball
Stem
Trunnion Block
Seat Assembly
Top Cover
Seat Springs
Stem Bearing
Lower Trunnion Bearing
Adapter Primary Seal
Adapter Sub-Seal
Bonnet Primary Seal
Bonnet Sub-Seal
Lower Trunnion Primary Seal
Lower Trunnion Sub-Seal
10 KF Series P3 Ball Valves
Part No.
18
19
20
21
22
23
24
25
26
28
29
30
31
32
34
36
46
Description
Stem Seal
Stem Sub-Seal
Seat Seal
Seat Seal Backup
Seat Sub-Seal
Stud, Body
Nut, Body
Cap Screw, Bonnet
Cap Screw, Top Cover
Thrust Bearing
Bleed/Drain Valve
Injection Fitting
Ball Check
Drain Plug
Key
Alignment Pin, Bonnet
Trunnion Block Pin
31
30
KF Series P3 Class 150 & 300 • Dimensional Data (in., mm)
H
I
G
D
B
C
B1
E
F
A
Dimensional Data,14"FP-24"FP, Class 150
Size
(in.)
14
16
20x16
18
20
24x20
24
A
RTJ
RF
in.
mm
27.0
30.0
36.0
34.0
36.0
42.0
42.0
686
762
914
864
914
1067
1067
in.
B
Dimension (in./mm)
C
D
B1
E
F
G
H
I
WE
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
27.5 698.5 30.0 762 13.3 337 13.3 337 21.0 533.4 15.7
30.5 775 33.0 838 15.3 387.4 15.3 387.35 23.5 596.9 16.7
36.5 927 39.0 991 15.3 387.4 19.3 489 27.5 698.5 16.7
34.5 876 36.0 914 17.2 438 17.2 438 25.0 635.0 19.1
36.5 927 39.0 991 19.3 489 19.3 489 27.5 698.5 21.1
42.5 1080 45.0 1143 19.3 489 23.3 591 32.0 812.8 21.1
42.5 1080 45.0 1143 23.3 591 23.3 591 32.0 813.0 24.3
mm
in.
mm
in.
mm
in.
400
423
423
485
537
537
616
15.3
17.7
17.7
19.5
21.4
21.4
23.2
388.0
450.0
450.0
495.0
542.5
542.5
590.5
25.1
28.0
28.0
31.9
34.1
34.1
40.4
638
710
710
810
865
865
1025
18.5
19.4
19.4
22.3
24.3
24.3
27.8
mm
in.
470 20.4
493 18.7
493 18.7
566 22.6
618 22.6
618 22.6
705 23.3
mm
in.
mm
518
475
475
575
575
575
592
23.6
27.6
27.6
27.6
27.6
27.6
31.5
600
700
700
700
700
700
800
Dimensional Data, 14"FP-24"FP, Class 300
Size
(in.)
14
16
20 x16
18
20
24x20
24
A
RTJ
RF
in.
30.0
33.0
39.0
36.0
39.0
45.0
45.0
mm
762
838
991
914
991
1143
1143
in.
30.6
33.6
39.8
36.6
39.8
45.9
45.9
mm
778
854
1010
930
1010
1165
1165
B
B1
Dimension (in./mm)
C
D
E
F
G
H
I
WE
in.
30.0
33.0
39.0
36.0
39.0
45.0
45.0
mm
762
838
991
914
991
1143
1143
in. mm in. mm in. mm in. mm in.
13.3 337 13.3 337 23.0 584 15.7 400 15.3
15.3 387.4 15.3 387.4 25.5 648 16.7 423 16.7
15.3 387.4 19.3 489 30.5 775 16.7 423 16.7
17.2 438 17.2 438 28.0 711 19.2 488 19.6
19.3 489 19.3 489 30.5 774.7 21.2 538 21.6
19.3 489 23.3 591 36.0 914 21.2 538 21.6
23.3 591 23.3 591 36.0 914 24.6 624 23.4
mm
388
425
425
498
549
549
593.8
in.
25.1
28.0
28.0
32.3
34.4
34.4
40.9
mm
638
710
710
820
874
874
1040
in.
18.5
19.4
19.4
22.4
24.7
24.7
29.3
mm
470
493
493
569
627
627
744
in.
20.4
22.6
22.6
22.6
23.3
23.3
27.3
mm
518
575
575
575
592
592
693
in.
23.6
27.6
27.6
27.6
31.5
31.5
35.4
mm
600
700
700
700
800
800
900
KF Series P3 Ball Valves
11
KF Series P3 Class 600 • Dimensional Data (in., mm)
H
G
I
Lever Operated
2"-6" RP
G
D
B
C
B1
E
F
A
Dimensional Data, 2"FP-36"FP, Class 600
Size
(in.)
2
3x2
3
4 x3
4
6x4
6
8x6
8
10x8
10
12x10
12
14x12
16x12
14
16
20x16
18
20
22
24x20
24
26
30
36
A
RTJ
RF
in.
11.5
14.0
14.0
17.0
17.0
22.0
22.0
26.0
26.0
31.0
31.0
33.0
33.0
35.0
39.0
35.0
39.0
47.0
43.0
47.0
51.0
55.0
55.0
57.0
65.0
82.0
mm
292
356
356
432
432
559
559
660
660
787
787
838
838
889
991
889
991
1194
1092
1194
1295
1397
1397
1448
1651
2083
in.
11.6
14.1
14.1
17.1
17.1
22.1
22.1
26.1
26.1
31.1
31.1
33.1
33.1
35.1
39.1
35.1
39.1
47.2
43.1
47.2
51.4
55.4
55.4
57.5
65.5
82.6
mm
295
359
359
435
435
562
562
664
664
791
791
841
841
892
994
892
994
1200
1095
1200
1305
1407
1407
1461
1664
2099
12 KF Series P3 Ball Valves
B
B1
Dimension (in./mm)
C
D
E
F
G
H
I
WE
in.
11.5
14.0
14.0
17.0
17.0
22.0
22.0
26.0
26.0
31.0
31.0
33.0
33.0
35.0
39.0
35.0
39.0
47.0
43.0
47.0
51.0
55.0
55.0
57.0
65.0
82.0
mm
292
356
356
432
432
559
559
660
660
787
787
838
838
889
991
889
991
1194
1092
1194
1295
1397
1397
1448
1651
2083
in.
2.0
2.0
3.0
3.0
4.1
4.1
6.0
6.0
8.0
8.0
10.0
10.0
12.0
12.0
12.0
13.3
15.3
15.3
17.2
19.3
21.3
19.3
23.3
25.0
29.0
34.5
mm
51.0
51.0
76.2
76.2
103.4
103.4
152.4
152.4
203.0
203.0
254.0
254.0
304.8
304.8
304.8
337.0
387.4
387.4
438.0
489.0
539.8
489.0
591.0
635.0
736.6
876.3
in.
2.0
3.0
3.0
4.0
4.1
6.0
6.0
8.0
8.0
10.0
10.0
12.0
12.0
13.3
15.3
13.3
15.3
19.3
17.2
19.3
21.3
23.3
23.3
25.0
29.0
34.5
mm
51.0
76.2
76.2
101.6
103.3
152.4
152.4
203.2
203.2
254.0
254.0
304.8
304.8
337.0
387.4
337.0
387.4
489.0
438.0
489.0
539.8
591.0
591.0
635.0
736.6
876.3
in.
6.5
8.3
8.3
10.7
10.8
14.0
14.0
16.5
16.5
20.0
20.0
22.0
22.0
23.7
27.0
23.7
27.0
32.1
29.3
32.0
34.3
37.0
37.0
40.0
44.5
51.8
mm
165
210
210
273
273.1
356
356
419.1
419.1
508
508
559
558.8
603
686
603
686
815
743
812.8
870
940
940
1016
1130.3
1314.5
in.
6.1
6.1
6.7
6.7
8.0
8.0
9.1
9.1
11.4
11.4
13.0
13.0
15.9
15.9
15.9
15.7
17.4
17.4
19.6
22.2
22.1
22.2
24.6
25.1
28.3
32.9
mm
155.0
155.0
170.0
170.0
201.0
201.0
230.0
230.0
290.5
290.5
329.0
329.0
404.7
404.7
404.7
400.0
443.0
443.0
498.0
565.0
561.8
565.0
624.5
638.1
719.2
834.6
in.
4.2
4.2
5.4
5.4
6.4
6.4
9.2
9.2
12.4
12.4
15.7
15.7
17.8
17.8
17.8
15.3
17.6
17.6
20.1
21.3
22.2
21.3
23.5
25.1
31.5
34.1
mm
106.3
106.3
136.3
136.3
162.3
162.3
234.5
234.5
316.0
316.0
399.0
399.0
451.0
451.0
451.0
388.5
445.8
445.8
510.5
542.0
563.0
542.0
596.0
638.6
799.7
865.0
in.
6.5
6.5
9.0
9.0
10.4
10.4
12.6
12.6
17.0
17.0
20.4
20.4
24.5
24.5
24.5
25.1
28.9
28.9
33.1
36.2
36.8
36.2
41.1
43.2
49.4
58.7
mm
165
165
229
229
264
264
319
319
432
432
518
518
622
622
622
638
735
735
840
920
935
920
1045
1097
1254.8
1490
in.
22.8
22.8
27.6
27.6
27.8
27.8
11.2
11.2
13.5
13.5
15.5
15.5
18.7
18.7
18.7
18.9
20.6
20.6
23.1
27.0
26.7
27.0
30.8
29.7
32.9
37.4
mm
580.0
580.0
700.0
700.0
704.9
704.9
285.0
285.0
342.5
342.5
393.0
393.0
474.7
474.7
474.7
481.0
524.0
524.0
587.0
685.0
677.2
685.0
781.5
753.7
834.7
950.2
in.
—
—
—
—
—
—
14.2
14.2
15.0
15.0
16.5
16.5
21.5
21.5
21.5
23.1
22.6
22.6
23.3
27.3
29.7
27.3
37.4
28.6
28.6
28.6
mm
—
—
—
—
—
—
360
360
380
380
418
418
545
545
545
588
575
575
592
693
753
693
950
726
726
726
in.
—
—
—
—
—
—
19.7
19.7
23.6
23.6
23.6
23.6
27.6
27.6
27.6
31.5
27.6
27.6
31.5
35.4
31.5
35.4
27.6
31.5
31.5
35.4
mm
—
—
—
—
—
—
500
500
600
600
600
600
700
700
700
800
700
700
800
900
800
900
700
800
800
900
KF Series P3 Class 900 • Dimensional Data (in., mm)
H
G
I
Lever Operated
2"-6" RP
G
D
B
C
B1
E
F
A
Dimensional Data, 2"FP-26"FP, Class 900
Size
(in.)
2
3x2
3
4 x3
4
6x4
6
8x6
8
10x8
10
12x10
12
14x12
16x12
14
16
18
20
24
26
A
RTJ
RF
in.
14.5
15.0
15.0
18.0
18.0
24.0
24.0
29.0
29.0
33.0
33.0
38.0
38.0
40.5
44.5
40.5
44.5
48.0
52.0
61.0
65.0
mm
368
381
381
457
457
610
610
737
737
838
838
965
965
1029
1130
1029
1130
1219
1321
1549
1651
in.
14.6
15.1
15.1
18.1
18.1
24.1
24.1
29.1
29.1
33.1
33.1
38.1
38.1
40.9
44.9
40.9
44.9
48.5
52.5
61.8
66.0
mm
371
384
384
460
460
613
613
740
740
841
841
968
968
1038
1140
1038
1140
1232
1334
1568
1676
B
B1
Dimension (in./mm)
C
D
E
F
G
H
I
WE
in.
14.5
15.0
15.0
18.0
18.0
24.0
24.0
29.0
29.0
33.0
33.0
38.0
38.0
40.5
44.5
40.5
44.5
48.0
52.0
61.0
65.0
mm
368
381
381
457
457
610
610
737
737
838
838
965
965
1029
1130
1029
1130
1219
1321
1549
1651
in.
2.0
2.0
3.0
3.0
4.1
4.1
6.0
6.0
8.0
8.0
10.0
10.0
12.0
12.0
12.0
12.8
14.8
16.8
18.6
22.5
24.4
mm
50.8
50.8
76.2
76.2
103.3
103.3
152.4
152.4
203.2
203.2
254.0
254.0
304.8
304.8
304.8
324.0
374.7
425.5
473.1
571.5
619.1
in.
2.0
3.0
3.0
4.0
4.1
6.0
6.0
8.0
8.0
10.0
10.0
12.0
12.0
12.8
14.8
12.8
14.8
16.8
18.6
22.5
24.4
mm
50.8
76.2
76.2
101.6
103.3
152.4
152.4
203.2
203.2
254.0
254.0
304.8
304.8
324.0
374.7
324.0
374.65
425.5
473.1
571.5
619.8
in.
8.5
9.5
9.5
11.5
11.5
15.0
15.0
18.5
18.5
21.5
21.5
24.0
24.0
25.3
27.8
25.3
27.8
31.0
33.8
41.0
42.8
mm
215.9
241.3
241.0
292.1
292.0
381.0
381.0
470.0
469.9
546.0
546.0
610.0
609.6
642.0
705.0
641.4
705.5
787.4
857.3
1041.4
1086.0
in.
5.8
5.8
7.0
7.0
8.5
8.5
10.0
10.0
11.7
11.7
13.5
13.5
16.4
16.4
16.4
15.6
18.3
19.5
21.5
24.9
27.0
mm
148.5
148.5
179.0
179.0
216.2
216.2
255.0
255.0
296.0
296.0
342.0
342.0
416.0
416.0
416.0
395.0
465.5
495.0
547.0
632.5
685.2
in.
4.6
4.6
5.7
5.7
6.9
6.9
10.0
10.0
12.6
12.6
16.0
16.0
18.2
18.2
18.2
16.5
19.4
20.4
22.7
29.7
27.1
mm
116.8
116.8
144.3
144.3
176.3
176.3
255.0
255.0
320.0
320.0
406.0
406.0
462.5
462.5
462.5
420.0
491.9
517.6
577.6
754.7
688.3
in.
7.3
7.3
9.3
9.3
11.3
11.3
14.2
14.2
17.3
17.3
20.9
20.9
25.4
25.4
25.4
24.8
29.3
32.0
36.0
42.3
47.0
mm
185
185
237
237
288
288
360
360
440
440
532
532
645
645
645
630
745
812
915
1075
1195
in.
22.8
22.8
27.6
27.6
33.7
33.7
12.1
12.1
14.2
14.2
16.2
16.2
19.6
19.6
19.6
18.7
21.8
25.7
27.7
31.1
31.3
mm
580
580
700
700
856.2
856.2
307
307
360
360
412
412
497
497
497
476
554.5
652.0
704.0
789.5
793.8
in.
—
—
—
—
—
—
14.8
14.8
21.5
21.5
20.4
20.4
23.1
23.1
23.1
23.1
23.3
28.1
28.1
37.4
28.6
mm
—
—
—
—
—
—
377
377
545
545
518
518
588
588
588
588
592
713.7
713.7
950.0
726.4
in.
—
—
—
—
—
—
23.6
23.6
27.6
27.6
23.6
23.6
31.5
31.5
31.5
31.5
31.5
35.4
35.4
27.6
35.4
mm
—
—
—
—
—
—
600
600
700
700
600
600
800
800
800
800
800
900
900
700
900
KF Series P3 Ball Valves
13
KF Series P3 Class 1500 & 2500 • Dimensional Data (in., mm)
H
G
I
Lever Operated
2"-6" RP
G
D
B
C
B1
E
F
A
Dimensional Data, 2"FP-16"FP, Class 1500
Size
(in.)
2
3x2
3
4 x3
4
6x4
6
8x6
8
10x8
10
12x10
12
16
A
RTJ
RF
in.
14.3
18.3
18.3
21.2
21.2
27.4
27.4
32.8
32.8
39.0
39.0
44.5
44.5
54.5
mm
368
470
470
546
546
705
705
832
832
991
991
1130
1130
1384
in.
14.6
18.6
18.6
21.6
21.6
28.0
28.0
33.1
33.1
39.4
39.4
45.1
45.1
55.4
mm
371
473
473
549
549
711
711
841
841
1000
1000
1146
1146
1407
B
B1
Dimension (in./mm)
C
D
E
F
G
H
I
WE
in.
14.5
18.5
18.5
21.5
21.5
27.8
27.8
32.8
32.8
39.0
39.0
44.5
44.5
54.5
mm
368
470
470
546
546
705
705
832
832
991
991
1130
1130
1384
in.
2.0
2.0
3.0
3.0
4.1
4.1
5.7
5.7
7.6
7.6
9.5
9.5
11.4
14.2
mm
50.8
50.8
76.2
76.2
103.3
103.3
146
146
194
194
241
241
289
368.3
in.
2.0
3.0
3.0
4.1
4.1
5.7
5.7
7.6
7.6
9.5
9.5
11.4
11.4
14.2
mm
50.8
76.2
76.2
103.3
103.3
146.0
146.0
194.0
193.7
241.0
241.3
289.0
289.0
368.3
in.
8.5
10.5
10.5
12.2
12.2
15.5
15.5
19.0
19.0
23.0
23.0
26.5
26.5
32.5
mm
215.9
266.7
266.7
311
311
394
394
483
482.6
585
585
673
673
825.5
in.
6.8
6.8
8.6
8.6
9.2
9.2
11.3
11.3
13.7
13.7
15.6
15.6
19.1
20.6
mm
172
172
219
219
234.5
234.5
288
288
347
347
397
397
486
523.9
in.
5.3
5.3
7.1
7.1
7.8
7.8
11.2
11.2
14.5
14.5
17.9
17.9
20.9
21.2
mm
134.3
134.3
180.3
180.3
197.3
197.3
285
285
369
369
455
455
530
539
in.
8.4
8.4
11.8
11.8
13.0
13.0
16.5
16.5
21.2
21.2
24.8
24.8
30.7
34.6
mm
214
214
300
300
330
330
420
420
538
538
630
630
780
877.9
in.
22.0
22.0
27.6
27.6
39.4
39.4
13.9
13.9
16.4
16.4
18.8
18.8
22.3
24.2
mm
558.8
558.8
700
700
1000
1000
352
352
417
417
478
478
567
614.4
in. mm
— —
— —
— —
— —
— —
— —
20.4 518
20.4 518
22.6 575
22.6 575
23.1 588
23.1 588
23.1 588
27.3 693.4
in.
—
—
—
—
—
—
23.6
23.6
27.6
27.6
31.5
31.5
31.5
35.4
mm
—
—
—
—
—
—
600
600
700
700
800
800
800
900
Dimensional Data, 2"FP- 8"RP, Class 2500
Size
(in.)
2
3
4
6x4
6
8x 6
A
RTJ
RF
in.
17.8
22.8
26.5
36.0
36.0
40.3
mm
451
578
673
914
914
1022
in.
17.9
23.0
26.9
36.5
36.5
40.9
mm
454
584
683
927
927
1038
14 KF Series P3 Ball Valves
B
B1
Dimension (in./mm)
C
D
E
F
G
H
I
WE
in.
17.8
22.8
26.5
36.0
36.0
40.3
mm
451
578
673
914
914
1022
in. mm in. mm in. mm
1.8 44.5 1.8 44.5 9.3 235.0
2.5 63.5 2.5 63.5 12.0 304.8
3.5 88.9 3.5 88.9 14.0 355.6
3.5 88.9 5.3 133.4 19.0 482.6
5.3 133.4 5.3 133.4 19.0 482.6
5.3 134.6 7.1 180.3 21.8 552.5
in.
7.2
8.8
9.8
9.8
13.4
13.4
mm in. mm
183 5.1 130
223 6.6 168.5
249 7.1 181
249 7.1 181
341 10.4 265
341 10.4 265
in.
9.4
12.1
13.8
13.8
15.0
15.0
mm
238
308
350
350
380
380
in.
27.6
33.5
12.3
12.3
16.2
16.2
mm
700
850
313
312.4
411
411
in.
—
—
16.5
16.5
22.6
22.6
mm
—
—
418.1
418.1
575.1
575.1
in.
—
—
23.6
23.6
27.8
27.8
mm
—
—
600
600
700
700
KF Series P3 Weights
Valve
Size
(in.)
Port
Weight (lbs.)
ANSI
Valve With GOP
Class
Only Handle Wt.
2
2
2
2
3
3
3
3
3
3
3
3
4
4
4
4
4
4
4
4
6
6
6
6
6
6
6
6
8
8
8
8
8
8
8
10
10
10
10
10
10
12
12
FP
FP
FP
FP
RP
FP
RP
FP
RP
FP
RP
FP
RP
FP
RP
FP
RP
FP
RP
FP
RP
FP
RP
FP
RP
FP
RP
FP
RP
FP
RP
FP
RP
FP
RP
RP
FP
RP
FP
RP
FP
RP
FP
600
900
1500
2500
600
600
900
900
1500
1500
2500
2500
600
600
900
900
1500
1500
2500
2500
600
600
900
900
1500
1500
2500
2500
600
600
900
900
1500
1500
2500
600
600
900
900
1500
1500
600
600
81
114
169
478
96
160
147
216
210
386
539
216
286
288
385
485
617
807
368
498
529
762
816
1157
847
1111
604
992
912
1344
1356
2149
1554
1256
1653
1499
2010
2628
3440
1834
2535
86
38
118 54
173 54
—
65
101 38
168 54
152 54
223 54
214 54
390 45
Consult Factory
—
65
223 54
295 45
296 54
395 45
494 45
—
81
Consult Factory
—
90
377 45
—
84
538 45
—
92
—
81
— 115
—
90
— 168
—
84
—
90
—
92
— 112
— 115
— 196
— 168
—
90
— 115
— 112
— 198
— 196
— 300
— 115
— 288
Weight (kg)
With
GOP
Valve With GOP
Only Handle Wt.
With
GOP
119
168
223
543
134
214
201
270
264
431
37
52
77
217
44
73
67
98
95
175
55
77
101
246
62
98
92
123
120
196
39
18
54
25
79
25
220
30
46
18
76
25
69
25
101
25
97
25
179
21
Consult Factory
604 245 248
30
270
98
101
25
331 130 134
21
342 131 134
25
430 175 179
21
530 220 224
21
698 280 —
37
Consult Factory
897 366 —
41
413 167 171
21
582 226 —
38
574 240 244
21
854 346 —
42
897 370 —
37
1272 525 —
53
937 384 —
41
1279 504 —
76
688 274 —
38
1082 450 —
41
1004 414 —
42
1456 610 —
51
1471 615 —
53
2345 975 —
89
1722 705 —
76
1346 570 —
41
1768 750 —
53
1611 680 —
51
2208 912 —
90
2824 1192 —
89
3740 1560 — 136
1949 832 —
53
2823 1150 — 131
274
123
151
156
196
241
317
407
188
264
261
388
407
577
425
580
312
491
456
661
668
1064
781
611
803
731
1002
1281
136
885
1281
Valve
Size
(in.)
Port
Weight (lbs.)
ANSI
Valve With GOP
Class
Only Handle Wt.
12
12
12
12
14
14
14
14
14
16
16
16
16
16
16
16
16
16
18
18
18
18
20
20
20
20
20
20
20
20
22
24
24
24
24
24
24
24
24
26
26
30
36
RP
FP
RP
FP
FP
FP
RP
FP
FP
RP
FP
RP
FP
RP
FP
RP
FP
FP
FP
FP
FP
FP
RP
FP
RP
FP
RP
FP
RP
FP
FP
RP
FP
RP
FP
RP
FP
RP
FP
FP
FP
FP
FP
900
900
1500
1500
150
300
600
600
900
150
150
300
300
600
600
900
900
1500
150
300
600
900
150
150
300
300
600
600
900
900
600
150
150
300
300
600
600
900
900
600
900
600
600
2226
2865
4156
4012
1781
2380
2491
3020
3339
1610
2799
2332
2870
3042
3791
3947
4596
9393
2921
4634
5742
6614
2667
4805
4909
5608
4785
6130
6549
9614
7762
5343
7680
6063
7960
7475
12,125
12,303
15,500
11,951
17,320
17,960
28,919
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
198
299
300
300
198
198
288
288
198
198
198
198
194
288
293
198
476
842
293
293
476
842
198
289
293
476
646
842
842
842
904
289
476
289
842
842
870
842
870
904
915
915
915
Weight (kg)
With Valve With GOP
GOP Only Handle Wt.
2424
3164
4456
4312
1979
2578
2779
3308
3537
1808
2997
2530
3064
3330
4084
4145
5072
10,235
3214
4927
6218
7456
2865
5094
5202
6084
5431
6972
7391
10,456
8666
5632
8156
6352
8802
8317
12,995
13,145
16,370
12,855
18,235
18,875
29,834
1010
1300
1885
1820
808
1080
1130
1370
1515
730
1270
1058
1302
1380
1720
1790
2085
4261
1325
2102
2605
3001
1210
2180
2227
2544
2170
2781
2971
4361
3521
2424
3484
2751
3611
3391
5500
5581
7031
5421
7856
8147
13,117
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
With
GOP
90 1100
136 1436
136 2021
136 1956
90 898
90 1170
131 1261
131 1501
90 1605
90 820
90 1360
90 1148
88 1390
131 1511
133 1853
90 1880
216 2301
382 4643
133 1458
133 2235
216 2821
382 3383
90 1300
131 2311
133 2360
216 2760
293 2464
382 3163
382 3353
382 4743
410 3931
131 2555
216 3700
131 2882
382 3993
382 3773
395 5895
382 5963
395 7426
410 5831
415 8271
415 8562
415 13,532
Note: All weights listed are estimated. Consult factory for sizes not shown.
KF Series P3 Ball Valves
15
KF Series P3 Topworks (in.) & Stem Torque Data (in.-lbs.)
Stem Detail
Topworks
Detail
Sq. Key • 8"- 24"
Flatted Stem • 2"- 6"
CLOSED
C
A
A
W
Valve
Bore Sz.
(in.)
2
2
2
2
3
3
3
3
4
4
4
4
6
6
6
6
8
8
8
10
10
10
12
12
12
14
14
14
14
16
16
16
16
16
18
18
18
18
20
20
20
20
22
24
24
24
24
26
26
30
36
W
ANSI
Class
A
600
900
1500
2500
600
900
1500
2500
600
900
1500
2500
600
900
1500
2500
600
900
1500
600
900
1500
600
900
1500
150
300
600
900
150
300
600
900
1500
150
300
600
900
150
300
600
900
600
150
300
600
900
600
900
600
600
0.871
0.871
1.103
1.378
1.378
1.378
1.493
1.493
1.497
1.497
1.774
1.774
1.931
1.992
2.493
2.493
2.870
2.870
2.870
3.240
3.240
3.240
3.994
3.994
3.990
3.240
3.240
3.240
3.240
3.240
3.240
4.333
4.333
3.541
4.333
4.333
4.333
4.742
4.333
4.323
4.333
4.742
4.723
4.333
4.333
4.725
5.741
4.723
5.904
5.904
5.904
B
N
E
K
D
J
G
F
M
B
C
D
E
—
1.319 3.760 0.709
—
1.345 3.858 0.709
—
1.988 4.094 1.063
—
2.089 5.118 0.787
—
2.010 4.429 0.787
—
2.000 4.941 0.945
—
1.973 4.921 1.181
—
1.890 4.921 0.591
—
1.687 5.020 1.220
—
1.687 5.020 1.220
—
2.402 5.925 1.220
—
2.303 6.713 1.299
—
2.179 4.921 1.299
—
1.991 4.921 1.378
—
2.795 6.299 1.181
—
2.874 7.087 1.378
3.191 3.588 6.297 1.732
3.191 3.780 6.496 1.575
3.191 3.299 6.496 1.575
3.613 3.581 6.900 0.986
3.617 3.972 7.096 1.260
3.617 3.775 7.490 1.457
4.426 4.244 8.500 1.319
4.426 4.210 9.051 1.813
4.426 4.210 9.445 1.813
3.613 3.603 8.071 1.299
3.613 3.603 8.071 1.299
3.613 3.603 8.071 1.299
3.613 3.287 7.874 1.457
3.613 3.838 8.228 1.299
3.613 3.838 8.228 1.299
4.749 4.114 8.898 1.299
4.749 4.568 8.543 1.000
3.743 5.785 9.071 1.299
4.749 3.996 9.055 1.299
4.749 3.996 9.055 1.299
4.749 3.996 9.055 1.299
5.284 3.267 11.807 1.000
4.749 4.528 9.248 1.000
4.749 4.449 9.248 1.417
4.749 4.382 9.839 1.000
5.284 5.118 11.807 1.000
5.003 7.340 10.055 1.496
4.749 4.429 9.248 1.417
4.749 4.429 9.248 1.417
5.257 4.331 11.020 2.362
6.391 6.259 12.386 1.181
5.003 7.264 10.055 1.496
6.223 8.915 13.205 1.496
6.223 8.935 12.614 1.496
6.223 6.592 12.614 1.496
* Stem with Double 'D' Flat Style
16 KF Series P3 Ball Valves
H • Stud Size
I • Hole Dia.
L • No. of Holes
Center
Flow
Line
OPEN
Dowel Pins:
Not Provided By
Actuator Supplier
H
I
L
M
N
Max Stem Break
Torq.Express. (1)
StudSz. Hole
J
K
No. Of C. Line Bore
W
SheerTorq. Torq.
For P<=2160
UNC
Dia.
Holes
Bore Depth
ft.-lbs. in.-lbs.
PSI in.-lbs. (2)(3)
5.906 4.921 1/2 -13 0.531
—
—
4
0.787 0.512 *0.558
134
1314
5.906 4.921 1/2 -13 0.531
—
—
4
0.787 0.512 *0.558
135
1616
0.409*P+708.20
5.906 4.921 1/2 -13 0.531
—
—
4
0.787 0.551 *0.746
306
2224
8.287 6.496 3/4-10 0.827
—
—
4
—
— *0.994
3769
5213
0.507*P+2170.91
6.240 5.433 1/2 -13 0.531
—
—
4
—
— *0.994
405
4151
6.713 5.433 1/2 -13 0.531
—
—
4
0.807 0.500 *0.994
630
5452
1.758*P+1548.75
6.693 5.512 5/8-11 0.657
—
—
4
1.024 0.650 *0.993
726
8062
8.268 6.496 3/4-10 0.827 5.124 0.157
4
—
— *0.993
5551 13,957 1.892*P+2604.56
6.890 5.512 5/8-11 0.657 3.939 0.118
4
0.984 0.630 *0.996
725
6043
6.890 5.512 5/8-11 0.657 3.939 0.118
4
0.984 0.630 *0.996
728
7759
2.319*P+2610.75
8.268 6.496 3/4-10 0.787 5.120 0.118
4
1.181 0.787 *1.247
1337 11,203
11.811 10.000 5/8-11 0.650 7.880 0.118
8
—
— *1.247
9094 17,387 2.319*P+3472.74
6.909 5.512 5/8-11 0.657 3.939 0.118
4
1.000 0.669 *1.247
1624 14,580
8.287 6.496 3/4-10 0.787 5.120 0.118
4
1.181 0.787 *1.247
1695 20,090 7.446*P+3559.47
11.811 10.000 5/8-11 0.669 7.880 0.118
8
—
— *1.747
3722 31,147
11.811 10.000 5/8-11 0.669 7.880 0.118
8
—
— *1.747 14,702 48,687 6.957*P+6945.48
8.287 6.496 3/4-10 0.787 5.120 0.157
4
1.165 0.787 0.750
7460 22,628
11.811 10.000 5/8-11 0.669 7.877 0.157
8
—
—
0.750
7460 31,164 11.535*P+5556.03
11.811 10.000 5/8-11 0.669 7.877 0.118
8
—
—
0.750
7460 48,293
11.319 10.000 5/8-11 0.657 7.877 0.118
8
—
—
0.875 10,631 29,042
11.811 10.000 5/8-11 0.657 7.877 0.118
8
—
—
0.875 10,631 39,699 14.402*P+ 7726.94
11.811 10.000 5/8-11 0.669 7.877 0.118
8
—
—
0.875 10,631 61,086
12.000 10.000 5/8-11 0.657 7.877 0.118
8
—
—
1.000 20,315 34,639
13.780 11.732 3/4-10 0.787 9.057 0.199
8
—
—
1.000 20,315 46,923 16.6*P+10071.30
13.780 11.732 3/4-10 0.787 9.057 0.199
8
—
—
1.000 20,315 71,574
11.811 10.000 5/8-11 0.657 7.875 0.118
8
—
—
0.875
7444 25,000
11.811 10.000 5/8-11 0.657 7.875 0.118
8
—
—
0.875
7444 37,886
28.32*P+16929.17
13.780 11.732 3/4-10 0.787 9.057 0.118
8
—
—
0.875 10,631 58,843
3
13.780 11.732 /4-10 0.827 9.057 0.118
8
—
—
0.875 10,631 79,800
11.811 10.000 5/8-11 0.657 7.875 0.118
8
—
—
0.875 10,631 33,602
11.811 10.000 5/8-11 0.657 7.875 0.118
8
—
—
0.875 10,631 50,655
13.228 11.732 3/4-10 0.787 9.057 0.118
8
—
—
1.000 26,103 78,390 37.48*P+22919.73
13.780 11.732 3/4-10 0.787 9.057 0.118
8
—
—
1.000 26,103 106,125
16.339 14.016 M30-3.5 1.299
—
—
8
—
—
0.984 24,849 157,839
13.228 11.732 3/4-10 0.787 9.057 0.118
8
—
—
1.000 26,103 45,663
13.228 11.732 3/4-10 0.787 9.057 0.118
8
—
—
1.000 26,103 74,210
62.74*P+27781.92
13.780 11.732 3/4-10 0.787 9.057 0.118
8
—
—
1.000 26,103 120,637
18.701 15.984 1 1/2-8 1.575 11.819 0.315
8
—
—
1.250 60,984 167,065
13.386 11.732 3/4-10 0.787 9.057 0.118
8
—
—
1.000 26,103 57,608
13.780 11.732 3/4-10 0.787 9.057 0.118
8
—
—
1.000 26,103 99,405
91.86*P+31428.12
13.780 11.732 3/4-10 0.787 9.057 0.118
8
—
—
1.000 26,103 167,381
18.701 15.984 1 1/2-8 1.575 11.819 0.315
8
—
—
1.250 60,984 235,357
13.386 11.732 M20-2.5 0.866
—
—
8
—
—
1.260 47,841 214,061 116.82*P+45840.34
13.780 11.732 3/4-10 0.787 9.057 0.118
8
—
—
1.000 26,103 110,228
13.780 11.732 3/4-10 0.787 9.057 0.118
8
—
—
1.000 26,103 174,487
141.23*P+69976.95
18.701 15.984 1 1/2-8 1.575 11.819 0.394
8
—
—
1.250 33,100 278,997
1
18.701 15.984 1 /2-8 1.575 11.817 0.118
8
—
—
1.500 108,306 383,508
16.339 14.016 M30-3.5 1.299
—
—
8
—
—
1.260 47,841 311,407
152.59*P+9167.15
18.701 15.984 M36-4 1.535
—
—
8
—
—
1.417 75,721 421,272
18.701 15.984 M36-4 1.535
—
—
8
—
—
1.417 75,721 370,245 176.69*P+115811.10
18.701 15.984 M36-4 1.535
—
—
8
—
—
1.417 75,721 462,561 222.41*P+142290.30
Note: (1) Torque at maximum differential pressure are tabulated
Pressure ratings are according to API 6D/ASME 16.34
(2) Torques expressions are suggested for other differential pressure Class 150 P = 285
Class 900
P = 2220
(3) Differential pressure “P” in torque expressions is in PSI
Class 300 P = 740
Class 1500 P = 3705
Class 600 P = 1480
F
G
KF Series P3 Topworks (mm) & Stem Torque Data (Nm)
Stem Detail
Topworks
Detail
Sq. Key • 8"- 24"
Flatted Stem • 2"- 6"
CLOSED
C
A
W
A
W
N
E
K
D
J
G
F
M
B
Valve
Bore Sz. ANSI
A
B
C
D
E
F
Class
(in.)
2
600
22.1
—
33.5
95.5
18.0 150.0
2
900
22.1
—
34.2
98.0
18.0 150.0
2
1500
28.0
—
50.5 104.0 27.0 150.0
2
2500
35.0
—
53.1 130.0 20.0 210.5
3
600
35.0
—
51.1 112.5 20.0 158.5
3
900
35.0
—
50.8 125.5 24.0 170.5
3
1500
37.9
—
50.1 125.0 30.0 170.0
3
2500
37.9
—
48.0 125.0 15.0 210.0
4
600
38.0
—
42.9 127.5 31.0 175.0
4
900
38.0
—
42.9 127.5 31.0 175.0
4
1500
45.1
—
61.0 150.5 31.0 210.0
4
2500
45.1
—
58.5 170.5 33.0 300.0
6
600
49.0
—
55.3 125.0 33.0 175.5
6
900
50.6
—
50.6 125.0 35.0 210.5
6
1500
63.3
—
71.0 160.0 30.0 300.0
6
2500
63.3
—
73.0 180.0 35.0 300.0
8
600
72.9
81.1
91.1 159.9 44.0 210.5
8
900
72.9
81.1
96.0 165.0 40.0 300.0
8
1500
72.9
81.1
83.8 165.0 40.0 300.0
10
600
82.3
91.8
91.0 175.3 25.0 287.5
10
900
82.3
91.9 100.9 180.2 32.0 300.0
10
1500 82.3
91.9
95.9 190.2 37.0 300.0
12
600
101.4 112.4 107.8 215.9 33.5 304.8
12
900
101.4 112.4 106.9 229.9 46.1 350.0
12
1500 101.3 112.4 106.9 239.9 46.1 350.0
14
150
82.3
91.8
91.5 205.0 33.0 300.0
14
300
82.3
91.8
91.5 205.0 33.0 300.0
14
600
82.3
91.8
91.5 205.0 33.0 350.0
14
900
82.3
91.8
83.5 200.0 37.0 350.0
16
150
82.3
91.8
97.5 209.0 33.0 300.0
16
300
82.3
91.8
97.5 209.0 33.0 300.0
16
600
110.1 120.6 104.5 226.0 33.0 336.0
16
900
110.1 120.6 116.0 217.0 25.4 350.0
16
1500
89.9
95.1 146.9 230.4 33.0 415.0
18
150
110.1 120.6 101.5 230.0 33.0 336.0
18
300
110.1 120.6 101.5 230.0 33.0 336.0
18
600
110.1 120.6 101.5 230.0 33.0 350.0
18
900
120.4 134.2 83.0 299.9 25.4 475.0
20
150
110.1 120.6 115.0 234.9 25.4 340.0
20
300
109.8 120.6 113.0 234.9 36.0 350.0
20
600
110.1 120.6 111.3 249.9 25.4 350.0
20
900
120.4 134.2 130.0 299.9 25.4 475.0
22
600
120.0 127.1 186.4 255.4 38.0 340.0
24
150
110.1 120.6 112.5 234.9 36.0 350.0
24
300
110.1 120.6 112.5 234.9 36.0 350.0
24
600
120.0 133.5 110.0 279.9 60.0 475.0
24
900
145.8 162.3 159.0 314.6 30.0 475.0
26
600
120.0 127.1 184.5 255.4 38.0 415.0
26
900
150.0 158.1 226.4 335.4 38.0 475.0
30
600
150.0 158.1 227.0 320.4 38.0 475.0
36
600
150.0 158.1 167.4 320.4 38.0 475.0
Note: (1) Torque at maximum differential pressure are tabulated
(2) Torques expressions are suggested for other differential pressure
(3) Differential pressure “P” in torque expressions is in MPa
H • Stud Size
I • Hole Dia.
L • No. of Holes
G
125
125
125
165
138
138
140
165
140
140
165
254
140
165
254
254
165
254
254
254
254
254
254
298
298
254
254
298
298
254
254
298
298
356
298
298
298
406
298
298
298
406
298
298
298
406
406
356
406
406
406
Center
Flow
Line
H
I
L
M
N
StudSz. Hole
J
K
No. Of C. Line Bore
UNC
Dia.
Holes
Bore Depth
1/2-13 13.5
—
—
4
20.0
13.0
1/2-13 13.5
—
—
4
20.0
13.0
1/2-13 13.5
—
—
4
20.0
14.0
3/4-10 21.0
—
—
4
—
—
1/2-13 13.5
—
—
4
—
—
1/2-13 13.5
—
—
4
20.5
12.7
5/8-11 16.7
—
—
4
26.0
16.5
3/4-10 21.0
130.1
4.0
4
—
—
5/8-11 16.7
100.1
3.0
4
25.0
16.0
5/8-11 16.7
100.1
3.0
4
25.0
16.0
3/4-10 20.0
130.0
3.0
4
30.0
20.0
5/8-11 16.5
200.2
3.0
8
—
—
5/8-11 16.7
100.1
3.0
4
25.4
17.0
3/4-10 20.0
130.0
3.0
4
30.0
20.0
5/8-11 17.0
200.2
3.0
8
—
—
5/8-11 17.0
200.2
3.0
8
—
—
3/4-10 20.0
130.0
4.0
4
29.6
20.0
5/8-11 17.0
200.1
4.0
8
—
—
5/8-11 17.0
200.1
3.0
8
—
—
5/8-11 16.7
200.1
3.0
8
—
—
5/8-11 16.7
200.1
3.0
8
—
—
5/8-11 17.0
200.1
3.0
8
—
—
5/8-11 16.7
200.1
3.0
8
—
—
3/4-10 20.0
230.0
5.0
8
—
—
3/4-10 20.0
230.0
5.0
8
—
—
5/8-11 16.7
200.0
3.0
8
—
—
5/8-11 16.7
200.0
3.0
8
—
—
3/4-10 20.0
230.0
3.0
8
—
—
3/4-10 21.0
230.0
3.0
8
—
—
5/8-11 16.7
200.0
3.0
8
—
—
5/8-11 16.7
200.0
3.0
8
—
—
3/4-10 20.0
230.0
3.0
8
—
—
3/4-10 20.0
230.0
3.0
8
—
—
M30-3.5 33.0
—
—
8
—
—
3/4-10 20.0
230.0
3.0
8
—
—
3/4-10 20.0
230.0
3.0
8
—
—
3/4-10 20.0
230.0
3.0
8
—
—
1 1/2-8 40.0 300.2
8.0
8
—
—
3/4-10 20.0
230.0
3.0
8
—
—
3/4-10 20.0
230.0
3.0
8
—
—
3/4-10 20.0
230.0
3.0
8
—
—
1 1/2-8 40.0 300.2
8.0
8
—
—
M20-2.5 22.0
—
—
8
—
—
3/4-10 20.0
230.0
3.0
8
—
—
3/4-10 20.0
230.0
3.0
8
—
—
1 1/2-8 40.0 300.2 10.0
8
—
—
1 1/2-8 40.0 300.2
3.0
8
—
—
M30-3.5 33.0
—
—
8
—
—
M36-4 39.0
—
—
8
—
—
M36-4 39.0
—
—
8
—
—
M36-4 39.0
—
—
8
—
—
Pressure ratings are according to API 6D/ASME 16.34
Class 150 P = 1.96
Class 900
P = 15.32
Class 300 P = 5.11
Class 1500 P = 25.53
Class 600 P = 10.21
OPEN
Dowel Pins:
Not Provided By
Actuator Supplier
Max Stem Break
Torq.Express. (1)
SheerTorq. Torq.
For P<=10.21
Nm
Nm
MPa-Nm (2)(3)
*14.17 181.7 148.45
*14.17 183.0 182.70
6.702*P+80.022
*18.95 414.9 251.12
*25.25
5110
589
8.308*P+245.31
*25.25 549.1 469.13
*25.25 854.2 616.34
28.808*P+175
*25.22 984.3 910.47
*25.22
7526
1577
31.004*P+294.32
*25.30 983.0 682.99
*25.30 987.0 877.18
38.001*P+295
*31.67 1812.7 1265.17
*31.67 12330
1964
38.001*P+392.42
*31.67 2201.8 1648
*31.67 2298.1 2271.52 122.018*P+402.2
*44.37 5046.4 3517.32
*44.37 19933
5501 114.004*P+787.84
19.05 10,114.4 2557.74
19.05 10,114.4 3523.65 189.024*P+627.8
19.05 10,114.4 5453.58
22.23 14,413.7 3282.72
22.23 14,413.7 4488.71 236.006*P+873.101
22.23 14,413.7 6898.33
25.40 27,543.4 3915.37
25.40 27,543.4 5305.41 272.024*P+1138
25.40 27,543.4 8082.77
22.23 10,092.7 2822.50
22.23 10,092.7 4284.35
464.080*P+1912.901
22.23 14,413.7 6651.16
22.23 14,413.7 9022.61
22.23 14,413.7 3793.60
22.23 14,413.7 5728.29
25.40 35,390.9 8860.63 614.185*P+2589.8
25.40 35,390.9 11,999.11
24.99 33,691.0 17,833
25.40 35,390.9 5154.32
25.40 35,390.9 8392.89
1028.12*P+3139.2
25.40 35,390.9 13,636.31
31.75 82,683.2 18,890
25.40 35,390.9 6501.61
25.40 35,390.9 11,243.33
1505.31*P+3551.2
25.40 35,390.9 18,920.42
31.75 82,683.2 26,612.55
32.00 64,864.0 24,186 1914.329*P+5179.96
25.40 35,390.9 12,443.10
25.40 35,390.9 19,733.26
2314.356*P+7907
31.75 44,877.6 31,536.37
38.10 146,843.2 43,362.63
32.00 64,864.0 35,184
2500.492*P+1035.8
35.99 102,664 47,597
35.99 102,664 41,832 2895.419*P+13086.65
35.99 102,664 52,262 3644.633*P+16078.80
* Stem with Double 'D' Flat Style
W
KF Series P3 Ball Valves
17
KF Series P3 Engineering Data
Flow Coefficient (C v)
Size (in.)
2
3x2
3
4x3
4
6x4
6
8x6
8
10 x 8
10
12 x 10
12
14 x 12
16 x 12
14
16 x 14
16
20 x 16
18
20
22
24
26
30
36
285 psi
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
32,600
14,780
44,700
14,870
57,825
74,775
—
113,284
—
—
—
Method of Calculating Flow
740 psi
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
30,900
14,750
42,600
14,860
56,225
71,800
—
109,414
—
—
—
Cv Value
1480 psi
350
190
1000
560
1850
800
4400
2150
8450
4500
14,250
8000
22,790
13,990
—
28,600
14,720
39,250
14,850
57,410
65,463
81,305
98,963
114,650
158,900
226,300
2220 psi
320
185
910
505
1760
730
4300
2010
8400
4160
14,160
7300
21,230
—
—
26,600
14,690
36,600
14,830
48,665
62,239
—
93,993
102,940
—
—
3705 psi
330
187
830
510
1660
742
4167
2033
8013
4051
13,309
7117
17,073
—
—
—
—
33,215
—
—
—
—
—
The Flow Coefficient “Cv” of a valve is the flow rate of water
(gallons/minute) through a fully opened valve, with a pressure
drop of 1 psi across the valve. To find the flow of liquid
through valve from the Cv, use the following formulas:
Liquid Flow
QL = flow rate of liquid (gal./min.)
∆P = differential pressure across the valve (psi)
G = specific gravity of liquid (for water, G=1)
Gas Flow
®
V
˚F
-20
-40
˚C
-29
-40
18 KF Series P3 Ball Valves
Seat Material
Devlon V
PEEK™
Teflon®
˚F
-50
-50
-50
˚C
-46
-46
-46
lon ®
***
1000 Class 300
Aflas®, EPDM**
Seal Material
Viton®
HNBR
Tef
Class 600
Viton®, Viton® GF, JW Viton®
HNBR
Differential Pressure-PSI
™
Class 900
K
3000
lon
Class 1500
PEE
˚C
-29
-46
-46
}
Dev
Nylon/Buna N & LT Buna N, EPDM*
4000
Low Temperature Limits
˚F
-20
-50
-50
{
6000 Class 2500
2000
Body Material
A105
LF2
F316
For non-critical flow
P
<1.0
P2
6500
5000
ANSI Cl.150 ANSI Cl. 300 ANSI Cl. 600 ANSI Cl. 900 ANSI Cl.1500
285
740
1480
2220
3705
275
720
1440
2160
3600
P2 P
g
Pressure Temperature Chart (Carbon Steel )
Note: Consult factory for sizes not shown.
Material
A105, LF2
F316
G
QL=Cv
Qg=61Cv
Qg = flow rate of gas (CFH at STP)
P2 = outlet pressure (psia)
g = Specific gravity of gas (for air, g=1.000)
—
—
Pressure Rating (psig)
P
Class 150
0
100
200
* Chemical Service
** Water & Steam service only
*** Teflon® not offered for Class 1500.
300
Temperature-˚F
400
500
600
KF Series P3 Ball Valves
19
Worldwide Sales Offices
KF Valves, a leading brand of CIRCOR Energy Products, Inc.
reaches into every corner of the globe serving the oil & gas and industrial marketplace.
Supplying an extensive range of product offerings
through a worldwide network of manufacturer representatives and distributors,
KF Valves is the right choice for all your flow control needs.
World Headquarters
US Industrial
Canada
KF Valves
1500 S.E. 89th Street
Oklahoma City, OK 73149 USA
Phone: (405) 631-1533
Fax: (405) 631-5034
E-mail: sales@circorenergy.com
www.circorenergy.com
Contromatics
1500 S.E. 89th Street
Oklahoma City, OK 73149 USA
Phone: (405) 631-1533
Fax: (405) 631-5034
E-mail: sales@circorenergy.com
www.circorenergy.com
KF Valves
9430-39th Avenue, Edmonton
Alberta, Canada T6E 5T9
Phone: (780) 463-8633
Fax: (780) 461-1588
E-mail: kfinfo@circorenergy.com
www.circorenergy.com
Licensed for Manufacture
in accordance with API 6A
& 6D and Firetest
to API 6FA and 607
Registered to the ISO 9001
Quality System Standard,
accredited by U.K., Dutch
and German qualifying
authorities.
www.circorenergy.com
KF-P3-April-08-HP • ©2008 CIRCOR Energy Products, Inc. • KF Valves is a CIRCOR Energy Products Brand • KF reserves the right to change designs, materials or specifications without notice or without obligation to furnish or install such changes on products previously or subsequently sold. • Viton® is a registered trademark of DuPont DowElastomers. • Teflon® is a registered trademark of DuPont. • PEEK™
is a trademark of Victrex Plc.• Devlon® is a registered trademark of Devol Engineering, Ltd. • Aflas® is a registered trademark of Asahi Glass.