COOPER LIGHTING - SURE-LITES ®
DESCRIPTION
The XR Series is an efficient, rugged, commercial grade emergency light.
The XR Series, in 6V and 12V models, has the extra capacity to power
remote heads for added application flexibility.
Type
Catalog #
Project
Date
Comments
Prepared by
S P E C I F I C AT I O N F E AT U R E S
- Universal J-Box
Mounting Pattern
- Keyhole Mounting Slots
- White Finish
E l e c t ro n i c
- Dual Voltage Input 120/277
VAC, 60 Hz
- Line-latching
- Solid-state Voltage
Limited Charger
- Solid-state Switching
- Low-Voltage Disconnect
- Brownout Circuit
- Overload/Short
Circuit Protection
- Test Switch/Power
Indicator Light
H e a d / L a m p Da t a
Code Compliance
- UL 924 Listed
- Life Safety NFPA 101
- NEC/OSHA
- Most State and Local Codes
- Two Heads Standard
- Top Mounted - Side
mounting Optional
- Glare-Free Lens
- Fully Adjustable
- Remote Capability
- High Impact - Thermoplastic
- Matches Housing Finish
M o u n t i n g R e q u i re m e n t
- Mount only on a vertical plane
(i.e. wall mount, etc.)
Wa rra n t y
- Unit: 1-year
- Battery: 5-year pro-rata
B a tte r y
- Sealed Lead Calcium,
Recombination
- Maintenance-free, Long-life
- Full Recharge Time,
24 hrs. (max.)
- Polarized Battery Terminals
XR
SERIES
13 1/4"
[337mm]
1 7/8"
[48mm]
R E M OT E C A PAC I T Y
H o u s i n g C o n s t ru c t i o n
7 7/8"
[200mm]
- 22-Gauge DieFormed Steel
- Knockout, Conduit
or Cord Set
D O U B L E H E A D , M E TA L B O DY
6 - VO LT
1 1/4 "
[32mm]
9 3/4" [248mm]
6 1/8"
[156mm]
12 1/4" [311mm]
SEALED LEAD
C A L C I U M B AT T E RY
2 1/2"
[64mm]
E M E R G E N CY L I G H T I N G
5" max.
[127mm]
E L E C T R I C A L R AT I N G S
Model
XR3
XR3347 (2)
XR5
XR7
XR9
XR11
XR11347 (2)
Battery
SLC
SLC
SLC
SLC
SLC
SLC
SLC
Rated Wattage to 87 1/2% of rated D.C. Voltage
DC Voltage 1 1/2 hours 2 hours
3 hours
4 hours
6
27
24
18
14
–
–
6
27
24
6
27
24
18
14
6
36
30
20
16
6
54
48
36
28
6
54
48
36
28
–
–
6
54
48
Lamp Information
Type
Incandescent
Incandescent
Halogen Sealed Beam
Incandescent
Tungsten Halogen
Incandescent
Incandescent
Wattage
9
9
6
9
6
9
9
Number
29-84
29-84
29-37
29-84
29-12
29-84
29-84
SLC=Sealed Lead Calcium Battery
ORDERING INFORMATION
Series
Options 2, 3
MH=Metal Heads
Accessories
V=Voltmeter
SD=Self Diagnostics4
1MSWH=Mounting Shelf, White
XR5
XR7
TDM=Time Delay Monitor
1
XR3
XR3347
5
Mounting Kit
1BRWH=Mounting Brackets (2) White
Protective Housing
WG1=Wire Guard
XR9
VS2=Polycarbonate Vandal Shield
XR11
VS2WP=Polycarbonate Vandal Shield - Weatherproof
XR11347
VK1=Voltmeter
347 = 120/347V.
E N E R G Y D ATA
2
Alternate Lamps, Finishes and Options available. Consult your Cooper Lighting
Representative.
XR3, XR5, XR7, XR9, XR11
3
0,1,3, and 4 Heads also available. Specify after catalog number (i.e., HR-12117379.
Input Current (Max.):
4
SD available on XR15, XR16, XR20, XR21 only.
120V= .12A
5
Order separately.
277V= .05A
Notes: 1
Specifications and dimensions subject to change without notice.
Consult your representative for additional options and finishes.
ADX041005 pc
2011-07-11 13:15:11
XR SERIES
P H OTO M E T R I C S
Horizontal Distribution
Ve r t i c a l D i s t r i b u t i o n
10
FEET
LEFT
10
FEET
LEFT
1FC
0
0.5
0.3
0.2
0.1
LAMP
AXIS
0
10
20
30
40
50
60
1FC
0
FEET
RIGHT
10
70
FEET FROM LAMP (Measured on axis)
0.5
0.3
0.2
0.1
LAMP
AXIS
FEET
RIGHT
10
0
10
20
30
40
50
60
70
FEET FROM LAMP (Measured on axis)
Lamp No. 29-37 or 29-84
Initial Lumens – 29-37 @ 107
29-84 @ 132
Lamp No. 29-37 or 29-84
T E C H N I C A L DATA
Heads
S o l i d - S t a te C h a rge r
The lamp housing is constructed of flame- and
impact-resistant injection molded thermoplastic
with matching finish. The three dimensional
swivel assembly permits approximate aiming
adjustment from 80° vertical and 358° rotation.
The placement is secured with a lockable pivot
mounted on a rotating base ring.
Supplied with a 120/277 VAC, voltage regulated
solid-state charger. Immediately upon
restoration of AC current after a power failure,
the charger provides a high charge rate. The
charge circuit reacts to the condition of the
battery and alters the rate of charge in order to
maintain peak battery capacity and maximize
battery life. Solid-state construction recharges
the battery following a power failure in
accordance with UL 924.
Lamps
Designed specifically for emergency lighting
applications, the PAR 36 sealed beam type
design insures optimum glare-free light
distribution along with horizontal and vertical
adjustment by rotating the lens within the
housing. Tungsten halogen lamps (XR5, XR9)
maximize light output with lower wattage.
Housing
The rugged 22-gauge die-formed cold rolled
steel housing is finished with white corrosionresistant polyester powder coat paint. Cabinet
has keyhole mounting slots and knockouts in
top, rear and side for AC/DC wiring connections
and has universal mounting pattern.
L i n e - L a t ch e d
Sure-Lites' line-latched electronic circuitry
makes installation easy and economical. A labor
efficient AC-activated load switch prevents the
lamps from turning on during installation to a
non-energized AC circuit. Line-latching
eliminates the need for a contractor's return to a
job site to connect the batteries when the
building's main power is permanently turned
on.
O ve rl o a d a n d S h o rt - C i rc u i t P ro te c t i o n
The solid-state overload monitoring device in
the DC circuit disconnects the lamp load from
the battery should excessive wattage demands
be made and automatically resets when the
overload or short-circuit is removed. This
overload current protective feature eliminates
the need for fuses or circuit breakers for the DC
load.
relays. The switching circuit is designed to
detect a loss of AC voltage and automatically
energizes the lamps. Upon restoration of the AC
power, the emergency lamps will switch off and
the charger will automatically recharge the
battery.
L ow- Vo l t a ge D i s c o n n e c t
When the battery's terminal voltage falls below
80% of the rated voltage, the low-voltage
circuitry disconnects the lighting load. The
disconnect remains in effect until normal utility
power is restored, preventing deep battery
discharge.
Te s t Sw i t ch / Powe r I n d i c a to r L i g h t
Conveniently located combination Test
Switch/Power Indicator Light allows for manual
verification of proper operation of the transfer
circuit and emergency lamps.
S e a l e d L e a d C a l c i u m B a tte r y
B row n o u t C i rc u i t
The brownout circuit in Sure-Lites' units
monitors the flow of AC current to the unit and
activates the emergency lighting system when a
predetermined reduction of AC power occurs.
This dip in voltage will cause most ballasted
fixtures to extinguish causing loss of normal
lighting even though a total power failure has
not occurred.
S o l i d - S t a te Tra n s fe r
The unit incorporates a solid-state switching
transistor which eliminates corroded and pitted
contacts or mechanical failures associated with
The fully sealed, long-life, maintenance-free
lead calcium battery is ideal for emergency
lighting applications. These recombinant cycle
batteries typically provide eight to ten years of
life and may be operated in any position.
Wa rra n t y
All Sure-Lites' units are backed by a firm oneyear warranty against defect in material and
workmanship (excluding lamps). Maintenancefree, long-life, sealed lead calcium batteries
carry a five-year pro-rata warranty.
Specifications and dimensions subject to change without notice.
Sure-Lites • Customer First Center • 1121 Highway 74 South • Peachtree City, GA 30269 • TEL 770.486.4800 • FAX 770.486.4801
ADX041005 pc
2011-07-11 13:15:11
2011-07-11 14:07:29