MoistureMaster™ SA Stand Alone Sensor

MoistureMaster™ SA Stand Alone Sensor
Throughputs up to 3,000 lb./hr. (1360 kg/hr.)
Stop Over-Drying and Under-Drying Your Resins!
The MoistureMaster™ sensor is the only online,
real time moisture analyzer to provides moisture
content of hygroscopic plastics in percent*.
Now you can retrofit ANY existing dryer hopper
regardless of the brand – including Conair, UNA-DYN,
AEC, Motan and more with the MoistureMaster™
sensor. Just hook up our Ethernet based control and
begin instantly monitoring actual online pellet moisture.
No more guesswork with dew point and time-based
estimates! No more wasteful over-drying! No more
under-drying because of incoming resin changes!
No more time-consuming offline testing to identify
out-of-spec material after bad parts are produced.
Retrofit MoistureMaster Sensors
On any hopper, silo, material line or
process machine throat.
PLC Control With High Resolution Color
Touch Screen
Monitors material moisture content
and temperature for up to four sensors.
Control Can be Interfaced With
Remote PC’s or Laptops
Enter Upper and Lower Moisture
Content Parameters
Alarm will warn you if moisture
parameters are exceeded.
MoistureMaster™ Series
Features BryScan 100 On-Line Moisture
Sensor Technology.
(International Patent #WO2012/004621)
2-Year warranty
Control Options For Slide Gate and/or
Diverter Valve
Operate customer-supplied slide gate
or diverter valve if “out-of-tolerance”
material is being produced.
Ethernet connectivity provides trend
charts for that all-important verification/
validation process.
The MoistureMaster™ sensor can be
retro-fitted to any hopper, silo or machine
throat regardless of brand.
Application Diagrams for MoistureMaster Stand Alone (SA):
MoistureMaster™ SA Control Offers Options For Diverting Out-Of-Spec Material
Normal Drying Process Loop For ANY Hopper With MoistureMaster™ SA
Under normal drying conditions,
properly dried material is transferred
to process machine.
ANY
Hopper
Under-Dried Process Loop For ANY Hopper With MoistureMaster™ SA
Under-dried material is recirculated
through drying hopper to attain
proper moisture level.
ANY
Hopper
Over-Dried Process Loop For ANY Hopper With MoistureMaster™ SA
Over-dried material is diverted to
a bulk bin where it can be
re-moisturized and reprocessed.
ANY
Hopper
MoistureMaster™ SA Sensor With Control Can Be Used With ANY Silo…
Regardless of Brand Or Mounted On Process Machine Throat
ANY
Silo
MoistureMaster-SA can be mounted under ANY silo to
measure varying moisture content and temperature of
material entering process.
Control Screens For Retrofit MoistureMaster™ – 7” High Resolution Color Touch Screen
Home screen allows access to all
other screens.
After entering drying parameters, the
retrofit MoistureMaster™ monitors
sensors on up to four hoppers.
Trending screens can be transmitted to
any PC or laptop and retained for
verification/validation records.
Standard Package:
MM-SA-4 MoistureMaster Stand Alone System includes:
(1) 7” Touchscreen display MoistureMaster™ control panel (controls up to 4 sensors)
(1) MoistureMaster Sensor
(1) 5 meter cable for connection
Sensing range:
Selectable either 100 - 5000 PPM or 0. 010 - 0. 500%
Accuracy, +/- 50 PPM guaranteed to as low as 100 ppm
Material temp measurement range 50–300° F
Operating environment temp range 40–120° F
Requires 120/1/60 power @ 5 AMPS
12” x 12” x 6” NEMA 12 Enclosure
Accessories:
Part Number
ADP-MM-475-600
Product
Outlet
(inches)
Square B.P.
(inches)
NPH 200-1000
4.125
6.00 x 6.00
4.75 x 4.75
“VTB-4, VPV”
ADP-MM-300
“NPH 15-30, VTB-3”
1.5
3.00 x 3.00
ADP-MM-475
NPH 60-150
2.125
4.75 x 4.75
NPH 1200-6000
6
VTB-8
6
ADP-MM-800
8.00 x 8.00
ADP-MM-975
VTB-9
8
9.75 x 9.75
ADP-MM-1400
ADP-MM-1499
12
14.00 x 14.00
MM-AO MoistureMaster Add On Sensor includes:
(1) MoistureMaster Sensor
(1) Cable T adaptor for panel integration
(1) 5 meter cable for connection
ADP-MM-SCR MoistureMaster Adaptor Flange Set* includes:
(1) Upper flange made to customer specifications
(1) Lower flange made to customer specifications
Painted carbon steel or aluminum
MoistureMaster Shielded Cables:
Sensor Network Trunk and Drop Extension Cables
Lengths of 5, 10, 30 and 50 meters
Male/Female for Easy Coupling
May be combined under 150 meters to get to proper length
MoistureMaster Sensor Dimensions
Adapters for Drying Hoppers:
3”, 4.75”, 6”, 8”, 9.75” and 14”.
Part Number
Description
MM-SA-4
MoistureMaster Stand Alone System
(Expandable to 4 Sensors)
MM-AO
MoistureMaster Add On Sensor
ADP-MM-SCR
MoistureMaster Adaptor Flange Set
econn-004
Additional MoistureMaster
Shielded Cable - 5 meter
econn-005
Additional MoistureMaster
Shielded Cable - 10 meter
econn-006
Additional MoistureMaster
Shielded Cable - 30 meter
econn-007
Additional MoistureMaster
Shielded Cable - 50 meter
© 2014 NOVATEC, Inc.
All rights reserved All information in this
bulletin is subject to change without notice.
Precision Online Moisture Analyzer
222 East Thomas Avenue Baltimore, MD 21225 USA 410-789-4811 | Fax: 410-789-4638
1-800-BESTDRY (800-237-8379) | sales@novatec.com | www.novatec.com
Form# MMSA 29 OCT 2014