Granada
We reserve the right to revise the design or components of any product without notice.
FULL CUT-OFF WALL PACK FAMILY;
Low Height Wall Mount;
Vandal Resistant HID, CFL, LED
CATALOG #
TYPE
PROJECT/LOCATION
APPROVED BY
SPECIFICATIONS
• EMERGENCY — LED — Remote Only
• HOUSING — Precision die-cast rear housing supplied with two ½” trade size threaded
conduit holes (one top and one bottom). Finished textured architectural bronze powder
coat over chromate conversion coating.
• REFLECTOR — Aluminum reflector.
• LENS — One-piece, high temperature injection molded clear polycarbonate lens finished to match rear housing.
• SOCKET — HID: 4KV Pulse Rated porcelain medium based socket with nickel-plated screw shell. CFL: Plug-in type, GX24Q-4 Base.
• LAMP — HID, CFL, Super-Bright White LED
• MOUNTING — Cast-in template for mounting directly to recessed 3” and 4” trade size
junction boxes.
• COMPLIANCE — Built to comply with U.S. and Canadian safety standards.
Suitable for wet locations.
ARRA
Compliant
DIMENSIONS
10-1/4”
10-1/4”
12”
7-1/2”
9245 W. Ivanhoe St. I Schiller Park, IL 60176
P: 847-260-0333 I F:847-260-0344 I E: quotes@eclipselightinginc.com I W: eclipselightinginc.com
© 2016 Eclipse Lighting Inc.
Eclipse Lighting pg.67 Rev. Jun 9, 2016
Granada
LAMP TYPE/QTY/WATTAGE ❶
Visit www.eclipselightinginc.com for available IES files
Fixture
FULL CUT-OFF WALL PACK FAMILY;
Low Height Wall Mount;
Vandal Resistant HID, CFL, LED
Compact Fluorescent
Double Twin Tube
Compact Fluorescent
Triple Twin Tube
(1)26w
TTT
(1)32/42w
Pulse Start Metal Halide
MH
(1)50/70/100w
Light Emitting Diode
LED
20/30w
FINISH
GN = Granada Series
BK =Black
BZ = Bronze (Standard)
WH = White Finish
REFLECTOR
FT = Forward Throw Distribution
WS = Wide Spread Distribution
OPTIONS
LAMP TYPE/QUANTITY/WATTAGE
Refer to Above Chart
120
277
EBMH
EBU
Voltage: Primary/Emergency Finish Options
GN
SERIES
VOLTAGE
11¾” x 10½” x 9”
DTT
Series Reflector Lamp Type/Qty/Watt Color Temp ORDERING GUIDE:
GRANADA
Dimensions - W x H x D
= 120 Volts
= 277 Volts
= Electronic Ballast for Metal Halide
= Universal Volt (120-277v) Electronic Ballast
9002
9206
9221
9328
ES1
ES2
FUS
GTD
QRS
= Torx Tamperproof Screwdriver
= Photocell – 120V
= Photocell – 277V
= Universal Photocell – 120/277V
= One MR16 2-Pin Emergency Socket (Lamps Not Incl’d)
= Two MR16 2-Pin Emergency Sockets (Lamps Not Incl’d)
= Single Fusing
= Generator Transfer Device (Bodine)
= Quartz Restrike Relay❺
EMERGENCY BATTERY OPTIONS❸
No onsite Emergency Power (AC or DC) is provided
Specify Fixture Voltage: 120V or 277V Power Feed
A=120V or B=277V
F luorescent Emergency Battery
REL2 = Remote: DTT/TTT; 1-2 Lamp; 650 Lms
REL52 = Remote, Cold Weather (Bodine)
DTT/TTT; 1-2 Lamp; up to 1250 Lms
LED COLOR TEMPERATURE
3K=±3000K range (120 Initial LPW)
4K=±4000K range (132 Initial LPW)
5K=±5000K range (140 Initial LPW)
6K=±6500K range (145 Initial LPW)
LED
OPTIONS
D7 = 0-10V low-voltage dimming (100-30% Standard, Consult Factory for Other)
MSE = Motion Sensor External—Single circuit-all on, all off
Specify Finish: White (WH)/Bronze (BZ)
MSE2 = Motion Sensor External—Dual circuit, half on half off
Specify Finish: White (WH)/Bronze (BZ)
MSI = Motion Sensor Integral⓴ Single circuit-all on, all off
MSI2 = Motion Sensor Integral⓴ Dual circuit, half on half off SG = 10KA Surge Protection for LED fixtures
(meets ANSI spec C62.41.2)
LED Emergency Battery REL61 = Remote: LED 12W, ± 720 Lms (Iota)
REL63 = Remote: LED 23W, ± 1290 Lms (Bodine)
REL67 = Remote: LED, Cold Weather,
23W, ± 1290 Lms (Iota)
REL69 = Remote: LED 23W, ± 1290 Lms (Iota)
REL82 = Remote: LED 4W (Fulham)—Factory Recom’d
REL85 = Remote: LED 20W (Fulham)—Factory Recom’d
REL88 = Remote: LED 16W (Fulham)—Factory Recom’d
NOTES:
❶ Consult Factory with requests regarding lamp sources, including LED, color temp., wattages or voltages not shown.
❸ Consult Factory for additional Emergency Battery options not shown.
❺ QRS: 120V Only—DC Bayonet base socket for 70 Watt quartz—Lamp by Others
⓴ Max mounting height of fixture is 10 feet
Max WHIP length with the REL provided by the factory is 8 feet.
Consult Factory for other Voltage
Due to form and fit, final selection of the Battery Pack under discretion of Factory
© 2016 Eclipse Lighting Inc.
pg.68 Eclipse Lighting
Rev. Jun 9, 2016 9245 W. Ivanhoe St. I Schiller Park, IL 60176
P: 847-260-0333 I F:847-260-0344 I E: quotes@eclipselightinginc.com I W: eclipselightinginc.com