Catalog Number
Notes
Type
FEATURES & SPECIFICATIONS
INTENDED USE
Incandescent Downlighting
Ideal for a wide variety of low- to medium-height ceiling applications including
commercial, retail and hospitality spaces where a baffled fixture is required.
OPTICAL SYSTEM
8” 8VI
Aluminum full reflectors are optically designed to maximize lumen output and
to provide superior glare control. The black or white baffled reflectors have
a semi-specular upper finish with a white painted flange standard.
MECHANICAL SYSTEM
Galvanized steel mounting frame with mechanical trim retention (clips) ensures secure and flush reflector mounting to ceiling. Mounting frame has
cutout section for remodel applications when installation from below is
necessary.
Galvanized bar hangers span up to 24” o.c. and feature built-in T-bar clips
and nailers for T-bar or wood joist installation.
Frames equipped with galvanized junction box UL Listed for through wire
applications.
Maximum 1-1/2” ceiling thickness.
ELECTRICAL SYSTEM
Durable medium-base porcelain socket with nickel-plated copper alloy
screw shell and contact. Integral thermal protector provides protection
against improper use of insulation materials.
BAFFLE
Vertical – A23, PS25, PAR38 or BR40
13
(33.0)
9-1/2
(24.1)
Rated for No. 12 AWG conductor thru-branch wiring. Mimimum 90° supply wire.
Ground wire provided.
14-3/8
(36.5)
12-3/8
(31.4)
9-7/8
(25.1)
13-1/4
(33.7)
Specifications
LISTING
Fixtures are UL Listed for thru-branch wiring, Non-IC recessed mounting,
damp location, and to U.S. and Canadian Safety Standards.
Max. height: 12-3/8 (31.4)
Ceiling opening: 8-7/8 (22.5)
12-3/8
(31.4)
Overlap trim: 9-1/2 (24.1)
Length: 13-1/4 (33.7)
Width: 14-3/8 (36.5)
7-7/8
(20.0)
9-1/2
(24.1)
All dimensions are inches (centimeters).
ORDERING INFORMATION
For shortest lead times, configure product using standard options (shown in bold).
Example: 8VI 8B3
8VI
Series
1
8VI
Reflector/Color 2
8B3
8B3W
Black baffle
White baffle
Options 3
SDT
277V stepdown transformer (277V or to 120V)
Accessories
Order as separate catalog number
Lamp Max. Wattages
NOTES:
1
2
Refer to label included with reflector for lamp type
and maximum wattage availability.
White painted flange standard.
3
For additional options, see www.lithonia.com.
Downlighting and Track
Max.
wattage
Lamp
type
SCA8 Sloped ceiling adaptor. Degree of
slope must be specified (10D, 15D, 20D,
25D, 30D) Ex: SCA8 10D.
200W
250W
A23 or PS25
PAR38 or BR40
CTE8 Ceiling thickness extender is used
when ceiling thickness is greater than
1-1/2 (3.8). Maximum thickness 2 (5.1).
Sheet #: 8VI-BAFFLE
8” 8VI Vertical – A23, PS25, PAR38 or BR40, Baffle
Distribution Curve
Distribution Data
Output Data
Coefficient of Utilization
Illuminance Data at 30” Above Floor for
a Single Luminaire
8VI 8B3, (1) 200W A23 lamp, .87 s/mh, 3930 rated lumens, test no. LTL9955
90
Zone
From 0°
cp.
0°
5°
15°
25°
35°
45°
55°
65°
75°
85°
90°
3116
3037
2525
1592
593
99
5
3
2
1
0
640
1280
1920
2560
3200
Lumens %lamp
0°-30° 1699
0°-40° 2082
0°-60° 2169
0°-90° 2175
90°-180° 0
0°-180° 2175
* Efficiency
43.2
53.0
55.2
55.3
0.0
55.3*
rf
rc
rw
20%
80%
70%
50%
50% 30% 50% 30% 50% 30%
0
1
2
3
4
5
6
7
8
9
10
.66
.62
.58
.54
.51
.48
.45
.43
.40
.38
.36
.66
.60
.55
.51
.48
.45
.42
.39
.37
.35
.33
.64
.60
.57
.53
.50
.47
.45
.42
.40
.38
.36
.64
.59
.55
.51
.47
.44
.42
.39
.37
.35
.33
.61
.58
.55
.52
.49
.46
.44
.42
.39
.38
.36
.61
.57
.53
.50
.47
.44
.41
.39
.37
.35
.33
Initial fc
Mount at beam
height center
8'
10'
12'
14'
16'
103.0
55.4
34.5
23.6
17.1
50%
10%
Beam angle 43.2° Beam angle 70.5°
fc at
fc at
Beam beam
Beam beam
diameter edge
diameter edge
4.4'
5.9'
7.5'
9.1'
10.7'
51.5
27.7
17.3
11.8
8.5
7.8' 10.3
10.6' 5.5
13.4' 3.5
16.2' 2.4
19.1' 1.7
Lithonia Lighting
Sheet #: 8VI-BAFFLE
© 2010 Acuity Brands Lighting, Inc. All rights reserved. Rev. 04/28/10
Downlighting and Track
One Lithonia Way, Conyers, GA 30012
Phone: 800-315-4935 Fax: 770-918-1209
www.lithonia.com