This catalogue is designed to be helpful to engineers and contractors in the application and selection of suitable products for construction and maintenance. If a unique application requires a special product not included in this catalogue, SFSP engineering personnel are ready to furnish design, consultation and realistic cost estimates. In addition, know-how are available for your convenience. SFSP provides an economical solution for electrical mechanical and industrial supports with a wide variety of application in the construction industry. For more information visit SFSP Website www.sfsp-ikk.com * IMPORTANT NOTE All products to be supplied in millimeters. Dimensions in inches are given just for information. As a declaration of Unitech’s commitment to quality, the company implemented the Quality Management Concept, and has acquired the ISO 9001:2008 which is an international standard used for the purpose of conformity assessment. It is an organizational method of setting a clear business process through a predefined workflow, in an organized manner. Index & Certificates 3 * INDEX 3 Index & Certificates 4 SFSP Factories 7 Applicable Standards 8 Pipe Clamps & Hangers 18 Uni - Channel the Supporting Systems 23 Threaded Accessories 30 Technical Data 36 Conversion Table 4 SFSP Factories Specialized Factory for Steel Products was first established in KSA in 1989; and it has been expanding ever since through a variety of products and through its geographical presence. Production at the factory is observed using modern practices of manufacturing methods in the steel construction industry with a definite compliance to the international standards of fabrication. SFSP has manufacturing facilities in KSA, UAE, Egypt and Lebanon. SFSP adapts quickly and easily to the market demands and requirements. Quality at SFSP is uncompromised; the factories have been able to acquire ISO 9001: 2008 in Jeddah in Saudi Arabia , 6th of October City in Egypt and in Sigma Factory for Steel Products in DIC as well. SFSP - KSA SFSP / Kingdom of Saudi Arabia Specialized Factory for Steel Products 3rd Industrial City / Jeddah Tel: +966 12 637 4482 Fax: +966 12 636 1963 sfsp.jeddah@ikkgroup.com Specialized Factory for Steel Products - Khumra / Jeddah Tel : +966 12 635 6066 Fax: +966 12 635 5658 sfsp.jeddah@ikkgroup.com SFSP / UAE SIGMA Factory for Steel Products - DIC (Dubai Industrial City) Tel : +971 4 429 7024 Fax: +971 4 429 7028 sfsp.dic@ikkgroup.com SFSP / EGYPT Specialized Factory for Steel Products - 6th of October City, Cairo Tel : +20 2 3831 2477 Fax: +20 2 3831 1036 sfsp.cairo@ikkgroup.com 6 SFSP / LEBANON Specialized Factory for Steel Products / s.a.r.l Tanayel, Bekaa Tel: +961 8 514 290 Fax: +961 8 514 291 sfsp.lebanon@ikkgroup.com Applicable Standards - BS 3974 Specifications for pipe hangers and support - Federal Specifications WW-H-171 E (Hanger and Support) A-A-1192 A (Bracket, Pipe) - Manufacturers Standardization Society (MSS) ANSI/MSS SP-58 Pipe Hangers and Supports - Materials, Design, Manufacture, Selection, Application, and Installation MSS SP-69 Pipe Hangers and Support-Selection and Application MSS SP-77 Guidelines for Pipe Support Contractual Relationships MSS SP-89 Pipe Hangers and Support-Fabrication and Installation Practices MSS SP-90 Guidelines for Terminology for Pipe Hangers and Support MSS SP-127 Bracing for Piping Systems SeismicWind- Dynamic Design, Selection, Application Applicable Standards - ASTM F 708 (standard practice for design and installation of rigid pipe hangers) 7 8 PIPE CLAMP HANG Pipe hangers offered in this section are designed to support pipes allowing for vetical adjustment and limited movement in the piping system. - Material: Carbon Steels are used in the manufacturing of pipe hangers. - Load Data: The load data published includes a safety factor of 4.0 unless noted (safety factor = ratio of ultimate load to the design load). Introduction PS GERS 9 Split Pipe Clamp with Long Nut M8/ M10 without rubber gasket - Material: Steel S235 - Service: Multifunction screw with hexagonal combination head (slot & crosshead), c/ w retaining washer - Finish: Electro Zinc Plated - Applications: - Fresh water distribution pipes - Waste water distribution pipes - Gas distribution pipes - Heating pipes - Industrial pipe fitting - Mechanical installation - Process and control lines Nominal Pipe Size M8/10 S.B. D. O. In Part No. N.P.S. T. W. Outside Diameter mm mm Side Bolt Thickness & Width Load Capacity mm mm KN PC-0010-C-HSPC0500810 1/2 15 20-25 M6x20 2.0x20 1.30 PC-0015-C-HSPC0750810 3/4 20 26-30 M6x20 2.0x20 1.30 PC-0020-C-HSPC1000810 1 25 32-36 M6x20 2.0x20 1.30 PC-0025-C-HSPC1250810 5/4 32 38-45 M6x20 2.0x20 1.30 PC-0030-C-HSPC1500810 3/2 40 47-51 M6x20 2.0x20 1.30 PC-0035-C-HSPC2000810 2 50 60-64 M6x20 2.0x20 1.30 PC-0040-C-HSPC2500810 5/2 65 74-80 M6x20 2.5x20 1.90 PC-0045-C-HSPC3000810 3 80 87-92 M6x20 2.5x20 1.90 PC-0150-C-HSPC4000810 4 1.90 PC-0155-C-HSPC5000810 5 PC-0160-C-HSPC6000810 6 100 113-118 M6x20 2.5x20 125 138-142 M6x20 2.5x20 150 159-166 M6x30 2.5x20 1.90 1.90 Pipe Clamps Split Pipe Clamp with Standard Nut M8 without rubber gasket - Material: Steel S235 - Service: Economy option - Finish: Electro Zinc Plated - Applications: - Unassembled in plastic bags per 2 sets - M6 screw with cross head Nominal Pipe Size M8 S.B. . .D O T. W. N.P.S. mm Side Bolt mm Thickness & Width Load Capacity In mm mm KN PC-0110-C-SPC05008 1/2 15 20-25 M6x20 2.0x20 1.30 PC-0115-C-SPC07508 3/4 20 26-30 M6x20 2.0x20 1.30 PC-0120-C-SPC10008 1 25 32-36 M6x20 2.0x20 1.30 PC-0125-C-SPC12508 5/4 32 38-45 M6x20 2.0x20 1.30 PC-0130-C-SPC15008 3/2 40 47-51 M6x20 2.0x20 1.30 PC-0135-C-SPC20008 2 50 60-64 M6x20 2.0x20 1.30 PC-0140-C-SPC25008 5/2 65 74-80 M6x20 2.5x20 1.90 PC-0145-C-SPC30008 3 80 87-92 M6x20 2.5x20 1.90 PC-0150-C-SPC40008 4 100 113-118 M6x20 2.5x20 1.90 PC-0155-C-SPC50008 5 125 138-142 M6x20 2.5x20 1.90 PC-0160-C-SPC60008 6 150 159-166 M6x20 2.5x20 1.90 Part No. 10 Outside Diameter NPS: Nominal Pipe Size - OD: Outside Diameter - SB: Side Bolt - T-W: Thickness - Width Split Pipe Clamp with Rubber with Long Nut M8/ M10 - Material: Steel S235 - Service: EPDM rubber insulation for sound reduction compliant with DIN 4109 - Finish: Electro Zinc Plated Nominal Pipe Size In Part No. M8/10 S.B. D. mm Outside Diameter mm Side Bolt mm Thickness & Width Load Capacity mm KN PC-0210-C-HSPCR0500810 1/2 15 20-25 M6x20 2.0x20 1.30 PC-0215-C-HSPCR0750810 3/4 20 26-30 M6x20 2.0x20 1.30 PC-0220-C-HSPCR1000810 25 32-36 M6x20 2.0x20 1.30 PC-0225-C-HSPCR1250810 5/4 32 38-45 M6x20 2.0x20 1.30 PC-0230-C-HSPCR1500810 3/2 40 47-51 M6x20 2.0x20 1.30 PC-0235-C-HSPCR2000810 50 60-64 M6x20 2.0x20 1.30 PC-0240-C-HSPCR2500810 5/2 65 74-80 M6x20 2.5x20 1.90 PC-0245-C-HSPCR3000810 3 80 87-92 M6x20 2.5x20 1.90 PC-0250-C-HSPCR4000810 4 100 1.90 5 125 113-118 M6x20 138-142 M6x20 2.5x20 PC-0255-C-HSPCR5000810 2.5x20 1.90 PC-0260-C-HSPCR6000810 6 150 159-166 M6x30 2.5x20 1.90 1 2 N.P.S. O. T. W. Nominal Pipe Size Part No. . D O. N.P.S. mm mm Thickness & Width mm KN 20-25 M6x20 2.0x20 1.30 PC-0315-C-SPCR07508 3/4 20 26-30 M6x20 2.0x20 1.30 25 32-36 M6x20 2.0x20 1.30 PC-0325-C-SPCR12508 5/4 32 38-45 M6x20 2.0x20 1.30 PC-0330-C-SPCR15008 3/2 40 47-51 M6x20 2.0x20 1.30 50 60-64 M6x20 2.0x20 1.30 65 74-80 M6x20 2.5x20 1.90 87-92 M6x20 2.5x20 1.90 1 2 PC-0340-C-SPCR25008 5/2 PC-0345-C-SPCR30008 3 80 PC-0350-C-SPCR40008 4 100 113-118 M6x20 2.5x20 1.90 PC-0355-C-SPCR50008 5 125 138-142 M6x20 2.5x20 1.90 PC-0360-C-SPCR60008 6 150 159-166 M6x20 2.5x20 1.90 T. W. Load Capacity 15 PC-0335-C-SPCR20008 S.B. mm Side Bolt PC-0310-C-SPCR05008 1/2 PC-0320-C-SPCR10008 M8 In Outside Diameter NPS: Nominal Pipe Size - OD: Outside Diameter - SB: Side Bolt T-W: Thickness - Width Pipe Clamps Split Pipe Clamp with Rubber with Standard Nut M8 - Material: Steel S235 - Service: EPDM rubber insulation for sound reduction compliant with DIN 4109 - Finish: Electro Zinc Plated 11 Omega Conduit & Pipe Clamp - Material: Steel S235 - Service: Designed for hanging conduit (rigid or EMT) to beam clamps, available with or without closure bolt - Finish: Electro Zinc Plated Nominal Pipe Size Outside Diameter Side Bolt Thickness & Width Load Capacity mm mm 20-25 M6x20 2.0x20 1.30 20 26-30 M6x20 2.0x20 1.30 25 32-36 M6x20 2.0x20 1.30 5/4 32 38-45 M6x20 2.0x20 1.30 3/2 40 47-51 M6x20 2.0x20 1.30 PC-0435-C-OMCPC200 2 50 60-64 M6x20 2.0x20 1.30 PC-0440-C-OMCPC250 5/2 65 74-80 M6x20 2.5x20 1.90 PC-0445-C-OMCPC300 3 80 87-92 M6x20 2.5x20 1.90 PC-0450-C-OMCPC400 4 100 113-118 M6x20 2.5x20 1.90 PC-0455-C-OMCPC500 5 125 138-142 M6x20 2.5x20 1.90 PC-0460-C-OMCPC600 6 150 159-166 M6x20 2.5x20 1.90 In mm PC-0410-C-OMCPC050 1/2 15 PC-0415-C-OMCPC075 3/4 PC-0420-C-OMCPC100 1 PC-0425-C-OMCPC125 PC-0430-C-OMCPC150 Part No. mm KN Channel Clamp Pipe Clamps - Material: Steel S235 - Service: For mounting (rigid or EMT) and steel pipes on C-Channels - Finish: Electro Zinc Plated or Hot-dip Galvanized Nominal Pipe Size Part No. mm mm mm T KN 20 25 1.5x28 1.30 3/4 20 26 30 1.5x28 1.30 PC-0520-C-CHC100 1 25 32 40 2.0x28 1.30 PC-0525-C-CHC100 5/4 32 42 45 2.0x28 1.30 PC-0530-C-CHC150 3/2 40 46 50 2.5x28 1.30 PC-0535-C-CHC200 2 50 60 64 2.5x28 1.30 PC-0540-C-CHC250 5/2 65 74 80 2.5x28 1.90 PC-0545-C-CHC300 3 80 86 92 2.8x28 1.90 PC-0550-C-CHC400 4 100 112 118 3.0x28 1.90 PC-0555-C-CHC500 5 125 138 142 3.0x28 1.90 PC-0560-C-CHC600 6 150 160 165 3.0x28 1.90 W OD Load Capacity 15 PC-0515-C-CHC075 Pipe Straps for thin metallic wall conduits (EMT) (Electrical Metallic Tubing) mm Thickness & Width 1/2 PC-0510-C-CHC050 12 In Outside Diameter EMT Rigid NPS: Nominal Pipe Size - OD: Outside Diameter - CB: Closure Bolt T-W: Thickness - Width Pipe Strap Two-Hole Pipe Strap/ U-Clip - Material: Steel S235 - Service: Designed for supporting pipe runs on walls and on C-Channels - Finish: Electro Zinc Plated Nominal Pipe Size Thickness & Width Outside Diameter Hole Size Load Capacity In mm mm mm mm KN PC-0510-C-PSUC050 1/2 15 22 1.5x25 6 1.30 PC-0515-C-PSUC075 3/4 20 28 1.5x25 6 1.30 PC-0520-C-PSUC100 1 25 35 1.5x25 6 1.30 PC-0525-C-PSUC150 Part No. 5/4 32 42 1.5x25 6 1.30 PC-0530-C-PSUC200 3/2 40 54 1.5x25 6 1.30 PC-0535-C-PSUC250 2 50 60 2.0x30 8 1.90 PC-0540-C-PSUC300 5/2 65 75 2.0x30 8 1.90 PC-0545-C-PSUC350 3 80 90 2.0x40 8 1.90 T W OD H - Material: Steel S235 - Service: Designed for supporting standard conduits, cable and steel pipes on walls or sides of beams or on C-Channels - Finish: Electro Zinc Plated Not recommended for use horizontally on ceilings, bottoms of beams and similar installations since the factor of safety is greatly reduced when so used Nominal Pipe Size Thickness & Width Hole Size Load Capacity mm mm mm PC-0610-C-PSST050 1/2 15 1.0x25 6 0.40 PC-0615-C-PSST075 3/4 20 1.0x25 6 0.40 Part No. In KN 25 1.0x25 6 0.40 PC-0625-C-PSST150 5/4 32 1.5x25 6 0.40 PC-0630-C-PSST200 3/2 40 1.5x25 6 0.40 50 1.5x25 8 0.40 65 2.0x25 8 0.45 80 2.5x25 8 0.45 PC-0620-C-PSST100 PC-0635-C-PSST250 1 2 PC-0640-C-PSST300 5/2 PC-0645-C-PSST350 3 NPS T NPS: Nominal Pipe Size - OD: Outside Diameter - T-W: Thickness - Width H: Hole Size W H Pipe Clamps One-Hole Pipe Strap <Snap Type> 13 Noise Suppression Profile SR noise-suppression strip for insertion in clamps and hangers - Material: EPDM. Rubber - Load Data: At normal frequency and pressure range, noise suppression 20 dB(A) & the temperature-resistant from-40 °C to + 100 °C - Electrical values: Specific resistance: 2x109 M ohm cm2 & the Surface resistance: 2 x109 M ohm Dimension Size A B C mm mm mm mm Part No. Rubber DIN 4109 PC-0005-C-RNS 20x6 6 3 20 A B C Pipe Clamps Clevis Hanger - Material: Steel S235 - Finish: Electro Zinc Plated or Hot-dip Galvanized - Application: Designed for suspending pipes Nominal Pipe Size Part No. PC-0710-C-CLH050 PC-0715-C-CLH075 PC-0720-C-CLH100 PC-0725-C-CLH100 PC-0730-C-CLH150 14 RS Hanger rod not included Upper Yoke PC-0735-C-CLH200 PC-0740-C-CLH250 PC-0745-C-CLH300 In mm 1/2 15 3/4 20 1 25 5/4 32 3/2 40 Rod Size Center Line Height mm mm mm mm mm Load Capacity KN M10 44 55 6 3x25 2.70 54 68 6 3x25 2.70 M10 58 75 6 3x25 2.70 M10 80 100 6 3x25 2.70 M10 81 106 6 3x25 2.70 50 M10 86 117 6 3x25 2.70 5/2 65 3 80 M12 106 144 8 3x30 5.00 M12 127 172 8 3x30 5.00 2 PC-0750-C-CLH400 4 100 M16 141 199 10 4x30 6.30 PC-0755-C-CLH500 5 125 M16 159 229 10 4x30 6.30 PC-0760-C-CLH600 6 150 M20 174 257 12 4x40 8.50 H T Thickness & Width M10 CL Lower Yoke Transverse CL: Center Line - H: Height - T: Transverse Adjustable Band Hanger - Material: Steel S235 - Finish: Electro Zinc Plated or Hot-dip Galvanized - Application: Designed for suspending non-insulated stationary pipe line. Knurled nut can be supplied in 8 to 10 mm diameter Nominal Pipe Size mm mm PC-0810-C-ADBH05008 In 1/2 15 M8 PC-0815-C-ADBH07508 3/4 20 M8 PC-0820-C-ADBH10008 1 25 M8 PC-0825-C-ADBH12508 5/4 32 M8 PC-0830-C-ADBH15008 3/2 40 M8 PC-0835-C-ADBH20008 2 50 M8 PC-0840-C-ADBH25010 5/2 65 M10 PC-0845-C-ADBH30010 3 80 M10 PC-0850-C-ADBH40010 4 100 M10 PC-0855-C-ADBH50010 5 125 M10 PC-0860-C-ADBH60010 6 150 M10 Part No. Swivel Hangers with rubber gaskets can be supplied also. RS Hanger rod not included Knurled Nut Height Rod Size Thickness & Width Load Capacity mm mm 54 1.0x25 0.30 1.0x25 0.30 1.2x25 0.30 1.2x25 0.30 1.2x25 0.30 1.2x25 0.30 1.2x25 0.60 1.2x25 0.60 1.2x25 0.60 2.0x25 1.10 2.0x25 1.10 64 72 83 96 113 130 156 215 242 279 KN Offset Pipe Clamp - Material: Steel S235 - Service: Designed for supporting and stabilizing vertical pipe runs - Finish: Electro Zinc Plated or Hot-dip Galvanized Nominal Pipe Size A B C mm mm mm mm PC-0910-C-OFFP050 1/2 15 60 PC-0915-C-OFFP075 3/4 20 60 25 65 32 75 Part No. PC-0920-C-OFFP100 In 1 PC-0925-C-OFFP125 5/4 PC-0930-C-OFFP200 2 PC-0935-C-OFFP250 5/2 10 3x30 0.90 8x40 175 10 3x30 0.90 8x40 190 10 3x30 0.90 8x40 200 10 3x30 0.90 50 80 10x50 225 12 4.5x30 1.20 65 85 10x50 250 12 4.5x30 1.20 95 10x50 275 12 4.5x30 1.20 PC-0945-C-OFFP400 4 14 5x40 1.80 PC-0950-C-OFFP600 6 150 130 12x50 400 14 5x40 1.80 8 200 160 12x50 450 14 5x40 1.80 Hole Size W 8x40 150 105 12x50 300 T-W: Thickness - Width T KN 80 A C mm 100 PC-0955-C-OFFP800 B mm 3 PC-0940-C-OFFP300 TW Hole Size Thickness Load Capacity & Width Pipe Clamps & Hangers H 15 Beam Clamps Beam Clamps offered in this section are designed to provide attachment of hanger rods to structures without drilling or welding. A wide range of types and sizes are available for various applications. C-Clamp - Material: Malleable Cast Iron Zinc plated Beam Clamps Casting tolerance according to DIN 1684 GTA/17 with hexagon head screw DIN 933 8.8, threaded end with cup point according to EN ISO 4753 and locknut DIN 439 for sprinkler systems, heating, ventilation and air conditioning, acoustic tubes and sanitary installation machines and steel constructions. Safety Factor D B F C 16 E H A B Part No. mm mm C mm PC-1105-C-MCC06 20 19 35 PC-1110-C-MCC08 21 19 35 PC-1115-C-MCC08 29 21 45 PC-1120-C-MCC10 23 21 PC-1125-C-MCC12 35 23.5 54 30 29.5 58 PC-1130-C-MCC16 42 A D E mm mm M6 ø7 F mm G mm H mm Load Capacity KN 35 M8 17 36 1.1 M8 ø9 35 M8 18 38 1.2 M8 ø9 41 M10 23 50 2.5 M10 ø11 41 M10 20 44 2.5 M12 ø13 48 M10 26 58 3.5 M16 ø17 55.5 M12 28 58.3 5.5 The Load Data the Load data includes a safety factor of 4, (safety factor = ratio of ultimate load divided to the design Load : Safety factor 4:1 G Steel Beam Clamp Open - Material: Steel S235 - Service: Designed for attaching hanger rods to the top or bottom flange of a beam - Finish: Hot-dip Galvanized - Ordering: Specify flange width and thickness - Steel Size: 5X30 mm (Center of bolt to bottom of beam flange) TxW A Part No. PC-1160-C-SBCO0530 C Bolt Size B Bolt and Nut included Steel Beam Clamp Closed - Material: Steel S235 - Service: Designed for attaching hanger rods to the top or bottom flange of a beam - Finish: Hot-dip Galvanized - Ordering: Specify flange width and thickness - Steel Size: 5X30 mm, 5X40 mm (Center of cross bolt to bottom of side of hanger rod nut) TxW B RS (rod size) Hanger rod not included Bolt and Nut included Window Beam Clamp - Material: Steel S235 - Service: Designed for attaching C-Channel to a top or bottom flange of a beam - Finish: Electro Zinc Plated - Steel Size: 6x90 mm 12x40 45 90 6 90 Beam Clamps C Part No. PC-1170-C-SBCC0530 17 18 The Supporting Systems SFSP is a leading manufacturer and fabricator of steel and aluminum products used for the support of equipments for industrial, commercial, utility and OEM installations. Our customers have access to the most complete support systems offered in the industry including metal framings, cable trays, pipe hangers, slotted angles, fasteners and others. * IMPORTANT NOTE For more information on Uni-Channel Systems , Uni-Metal technical staff will be ready to assist you with all necessary details. www.unimetal-ikk.com 19 Z Z Z Y Y Y Channel Y Y Y Y Y Y Y Z Z Y Y Y Y SFSP’s metal framing channel is cold formedY on modern rolling 41.0 Y 21.0 Y Z machines from low carbon steel manufactured according to BS Z Z 6946:1988. A continuous slot provides the ability to make attachments Z Z Z 41.0 at any point. Z Z Z Lengths Z Standard length: 3000mm with ± 3.2mm length tolerance. Z Custom lengths are available upon22.0 request. Z Finishes 21.0Z Y 21.0 Y 21.0 Y 21.0 Y Y 7.0 41.0 41.0 Y Y 41.0 Y 41.0 Y 22.0 22.0 21.0 Channel Dimensions CCH - 220/221 Height “H” Width “W” 21.0 mm 41.0 mm 41.0 mm 41.0 mm 1.5 mm 21.0 mm 41.0 mm 2.0 mm CCH - 340/341 41.0 mm 41.0 mm 2.0 mm CCH - 420/421 21.0 mm 41.0 mm 2.5 mm CCH - 440/441 41.0 mm 41.0 mm 2.5 mm 22.0 41.0 41.0 41.0 22.0 7.0 7.0 7.0 7.0 82.0 82.0 41.0 PT Type Channel ST Type Channel 22.0 7 7.0 7.0 7 22.0 41.0 82.0 13 30 41.0 41.0 41.0 Channel Hole Patterns ST Slotted Type 22.0 22.0 41.0 13 50 13 50 30 30 41.0 13 13 30 30 B2B Type 20 Thick. mm. Height “H” CCH-220 1.5 21.0 CCH-240 1.5 CCH-320 2.0 CCH-340 Part No. 7 7 41.0 82.0 Channel Patterns 0 - PT 1 - ST 2 - B2B 22.0 41.0 41.0 82.0 42.0 41.0 41.0 41.0 41.0 41.0 42.0 PT Plain Type 7.0 7.0 41.0 22.0 22.0 50 50 Part No. Y 41.0 22.0 42.0 42.0 22.0 41.0 7.0 41.0 0 Size 2 - 21/41 mm 4 - 41/41 mm 7.0 7.0 21.0 50 Material Thickness 2 for 1.5 mm 3 for 2.0 mm 4 for 2.5 mm Y 22.0 22.0 7.0 22.0 7.0 41.0 42.041.0 1.5 mm CCH - 320/321 2 21.0 21.0 Thickness CCH - 240/241 3 22.0 Y Y 22.0 22.0 Part No. Z 41.0 Selection Chart The Supporting Systems Y Y Y Z Z 21.0 Standard Finishes: Pre-Galvanized finish (ASTM A653M coating41.0 G90 Z 41.0 Z after fabrication Z and G60). Hot Dip Galvanized (ASTM A123 or BSEN Z 41.0 41.0 Z Z 41.0 Z 41.0 41.0 ISO1461:1999) . Other custom coatings are available upon request. Z 41.0 Metal Framing Channels CCH 320 Z Z 41.0 B2B Type Channel Thick. mm. Height “H” Part No. Thick. mm. Height “H” CCH-221 1.5 21.0 CCH-222 1.5 42.0 41.0 CCH-241 1.5 41.0 CCH-242 1.5 82.0 21.0 CCH-321 2.0 21.0 CCH-322 2.0 42.0 2.0 41.0 CCH-341 2.0 41.0 CCH-342 2.0 82.0 CCH-420 2.5 21.0 CCH-421 2.5 21.0 CCH-422 2.5 42.0 CCH-440 2.5 41.0 CCH-441 2.5 41.0 CCH-442 2.5 82.0 Cantilever Arm Brackets - SCA CCH421 41x21x2.5 Length Allowable Load A (mm) F1* A F2* F** 150 1.10 0.60 3.10 300 0.60 0.30 3.10 450 0.40 0.20 3.10 600 0.30 0.10 3.10 700 0.20 0.10 3.10 800 0.20 0.10 3.10 900 0.20 0.10 3.10 1000 0.20 0.10 3.10 Base plate: height (h) x width (b) x thickness (t) 120 50 8 - In the case of concrete support, use anchor M10. - In the case of C-channel frame, use bolt and spring nut M8. CCH441 41x41x2.5 Length Allowable Load A (mm) F1* A Base plate: height (h) x width (b) x thickness (t) 140 50 10 - In the case of concrete support, use anchor M16. - In the case of C-channel frame, use bolt and spring M8. F2* F** 150 3.10 1.50 7.50 300 1.50 0.80 7.50 450 1.00 0.50 7.50 600 0.80 0.40 7.50 700 0.70 0.30 7.50 800 0.60 0.30 7.50 900 0.50 0.30 7.50 1000 0.50 0.20 7.50 The Supporting Systems ** Connection force (pull out force) : 3.1 (KN) ** Connection force (pull out force) : 7.5 (KN) 25 or F2 h-50 h F1 Fz 1/2 A 1/2 Length A (mm) 25 FD b t Fv =F1 or F2 * IMPORTANT NOTE Given Loads are always in [kN] “ Allowable characteristic live load “ A 21 Cantilever Arm Bracket B2B - SCA CCH422 41x21x2.5 B2B Length A (mm) A Allowable Load F1* F2* F ** 150 2.50 1.30 4.80 300 1.30 0.60 8.48 450 0.80 0.40 4.80 600 0.60 0.30 4.80 700 0.50 0.30 4.80 800 0.50 0.20 4.80 900 0.40 0.20 4.80 1000 0.40 0.20 4.80 Base plate: height (h) x width (b) x thickness (t) 140 50 10 - In the case of concrete support, use anchor M12. - In the case of C-channel frame, use bolt and spring nut M8. Length Allowable Load A (mm) F1* A Base plate: height (h) x width (b) x thickness (t) 180 60 12 In the case of concrete support, use anchor M16. In the case of C-channel frame, use spring nut M10. ** Connection force (pull out force) : 8.3(KN) 25 h F1 Fz or F2 h-50 22 CCH442 41x41x2.5 B2B FD 25 The Supporting Systems ** Connection force (pull out force) : 4.8 (KN) b t 1/2 A 1/2 Length A (mm) Fv =F1 or F2 * IMPORTANT NOTE Given Loads are always in [kN] “ Allowable characteristic live load “ A F2* F** 150 7.00 3.50 8.30 300 3.50 1.80 8.30 450 2.30 1.20 8.30 600 1.80 0.90 8.30 700 1.50 0.80 8.30 800 1.30 0.70 8.30 900 1.20 0.60 8.30 1000 1.10 0.50 8.30 THREADED ACCESSORIES Accessories offered in this section are designed to reduce installation time. - Material: For maximum loading design, carbon steel is used in the manufacturing of threaded accessories. Stainless steel and other material are available. - Finish: Standard finishes are plain steel and Electro Plated zinc (ASTM B633 SCI) (BS 1706) - Load Data: The load data published includes a safety of 5.0 unless noted (safety factor = ratio of ultimate load to the design load) . 23 Anchor Bolts J - Bolt - Material: Steel S235 - Service: Designed for attaching to beam flange or purlin and as a concrete insert - Finish: Electro Zinc Plated Part No. Sp ec ify Thread Size Length mm mm Radius mm Load Capacity KN PC-1220-C-JB1050 10 50 13.0 1.00 PC-1225-C-JB1250 12 50 16.0 1.90 PC-1230-C-JB1660 16 60 19.0 3.10 PC-1235-C-JB2060 20 60 22.1 4.60 PC-1240-C-JB2260 22 60 25.1 6.50 PC-1245-C-JB2575 25 75 35.0 7.00 L Radius Size Threaded Accessories Length L - Bolt - Material: Steel S235 - Service: Designed for use as an anchor embedded in concrete - Finish: Electro Zinc Plated Part No. 24 Sp ec Ra di us ify Thread Size Length mm mm Radius mm Load Capacity KN PC-1320-C-AB1050 10 50 50 1.00 PC-1325-C-AB1250 12 50 50 1.90 PC-1330-C-AB1660 16 60 60 3.10 PC-1335-C-AB2060 20 60 70 4.60 PC-1340-C-AB2260 22 60 75 6.50 PC-1345-C-AB2575 25 75 90 7.00 L Size Length * IMPORTANT NOTE Other sizes are available on special order. Light Duty U - Bolt - Material: Steel S235 - Finish: Electro Zinc Plated - Application: Designed as a support, guide, or anchor for light - duty pipes Part No. Ra diu s Size Nominal Pipe Size In mm Thread Size Length mm mm Outside Diameter mm Load Capacity KN PC-1410-C-LDUB05006 1/2 15 6 20 22 0.40 PC-1415-C-LDUB07506 3/4 20 6 30 28 0.40 PC-1420-C-LDUB10006 1 25 6 30 35 0.40 PC-1425-C-LDUB12506 5/4 32 6 30 43 0.40 PC-1430-C-LDUB15006 3/2 40 6 35 50 0.40 PC-1435-C-LDUB20006 2 50 6 35 61 0.40 PC-1440-C-LDUB25008 5/2 65 8 35 78 0.90 PC-1445-C-LDUB30008 3 80 8 40 92 0.90 PC-1450-C-LDUB40010 4 100 10 50 116 1.00 PC-1455-C-LDUB60012 6 150 12 50 170 2.00 Length Outside Diameter Eye Rod - Material: Steel S235 - Finish: Electro Zinc Plated - Application: Designed for use in hanger supports to eliminate possible bending of threaded rod Part No. Size Sp ec ify L Length Eye Load Capacity KN mm 6 40 8 0.50 PC-1515-C-ERD0810 8 40 10 0.80 PC-1520-C-ERD1012 10 50 12 1.00 PC-1525-C-ERD1216 12 50 16 2.00 PC-1530-C-ERD1620 16 50 20 3.10 PC-1535-C-ERD2022 20 75 22 4.70 PC-1540-C-ERD2225 22 90 25 6.50 PC-1545-C-ERD2528 25 100 28 8.60 PC-1550-C-ERD2830 28 115 30 10.80 PC-1555-C-ERD3034 30 130 34 14.00 PC-1510-C-ERD0608 Eye ID Thread Size Length mm mm Threaded Accessories Hex Nuts included 25 Rod Size Hanger Rod not included Buckle Turnbuckle - Material: Steel S235 - Finish: Electro Zinc Plated Rod Size mm Part No. 3’’ (76.2) Rod Take Out 6 ’’ (152.4) PC-1605-C-TBKL06 6 PC-1610-C-TBKL08 8 PC-1615-C-TBKL10 10 PC-1620-C-TBKL12 12 PC-1625-C-TBKL16 16 PC-1630-C-TBKL20 20 PC-1635-C-TBKL22 22 PC-1640-C-TBKL25 25 PC-1645-C-TBKL25 25 PC-1650-C-TBKL25 25 PC-1655-C-TBKL25 25 PC-1660-C-TBKL25 25 - Available in Zinc Plated Thread & Stainless Steel Thread 26 - Material: Grade 4.6 - Finish: Electro Zinc Plated - Application: Designed as per DIN 933/ EN 24017 Tool Size Threaded Accessories Screws Hex Head Cap Screw Size mm Tool Size DIN EN mm mm M6x12 10 10 M6x25 10 10 M8x25 13 13 M8x40 13 13 M10x20 17 16 M10x30 17 16 M10x45 17 16 M10x60 17 16 M10x70 17 16 M12x22 19 18 M12x25 19 18 M12x30 19 18 M12x40 19 18 M12x50 19 18 M12x60 19 18 M12x80 19 18 M12x90 19 18 M16x40 24 24 M16x60 24 24 M16x90 24 24 - Available in Zinc Plated Dimension & Stainless Steal Dimension Hex Head Bolts used in combination with channel nuts. Square Head Cone Point Set Screw Size mm 10x40 10x50 12x40 12x50 Slotted Hex Head Machine Screw Size mm 6x20 6x30 6x40 8x30 8x40 10x30 10x40 Size mm 6x20 6x30 6x40 8x30 8x40 10x20 10x30 10x40 10x50 10x60 Slotted Flat Head Machine Screw Size mm 6x20 8x25 10x40 10x50 10x60 12x30 12x40 Coach Screw Size mm M8x90 M10x120 Threaded Accessories Slotted Round Head Machine Screw 27 Threaded Rods - Material: Forged Steel, Grade 4.6 - Finish: Electro Zinc Plated - Application: Designed as per DIN 975 Threaded Rod Threaded Accessories Size mm 28 Length mm Load Capacity KN M6 1 4.0 M6 2 4.0 M6 3 4.0 M8 1 8.0 M8 2 8.0 M8 3 8.0 M10 1 12.0 M10 2 12.0 M10 3 12.0 M12 1 18.0 M12 2 18.0 M12 3 18.0 M14 1 24.0 M14 2 24.0 M14 3 24.0 M16 1 34.0 M16 2 34.0 M16 3 34.0 M20 1 53.0 M20 2 53.0 M20 3 53.0 D - Available in Zinc Plated Thread & Stainless Steal Thread Rod Coupling Size Size mm Length Length Load Capacity mm KN M6 15 2.0 M8 20 4.0 M10 25 6.0 M12 30 9.0 M16 40 17.0 M20 50 27.0 - Available in Electroplated Thread & Stainless Steel Thread d D 9021 M 8 M 8 2 9021 M 10 M 10 3 440 M 12 9021 M 12 M 12 3 9021 M 16 M 16 5 4 Order Example: WA - ZP - M 12 - DIN T Round Washer M 6 M 8 Outside Diameter mm d Size mm d D M 6 - Application: Designed as per DIN 975 Inside Diameter mm Thickness mm 12 M 10 M8 16 6.4 1.6 8.4 1.6 21 M 12 M12 24 10.5 2.0 13 2.5 17 3.0 M6 M10 M16 M 3016 M 8 M 10 M 12 M 16 D: Outside Diameter - d: Inside Diameter - T: Thickness D [mm 12 Threaded Accessories S Washers Zinc Plated Stainless Steel - Material: Forged Steel - Finish: Zinc-Plated for Bolt and Stainless Steel for for bolt forbolt washers - ZP 16 21 24 30 Order Example: WA - ZP - M 12 - DIN E M Tool Size Nuts Hex Nut - Material: Forged Steel - Finish: Zinc-Plated - Application: Designed as per DIN 934/ ISO 4032 (DIN EN 24032) Size mm M6 Tool Size S/M(DIN) S/M(EN) mm mm 10/ 5 E mm 10/ 6 11.5 M8 13/ 6.5 13/ 7.5 15.0 M10 17/ 8 17/ 9.5 19.6 19/ 12 21.9 M12 19/ 10 M16 24/ 13 24/ 15.5 27.7 - Available in Zinc Plated Thread & Stainless Steel Thread 29 30 TECHNICA AL DATA Rigid Steel Conduit (Heavy Wall Conduit) Nominal Conduit Size In mm Nominal Inside Diameter In mm Minimum Weight with Couplings Attached Lbs/100 Ft. Kg/10 m 16.0 79.0 11.6 0.83 21.3 105.0 15.8 33.4 1.06 27.0 153.0 23.1 1.66 42.2 1.39 35.4 201.0 30.4 1.90 48.3 1.62 41.3 249.0 37.6 2 50 2.37 60.3 2.08 52.9 332.0 50.2 5/2 65 2.87 73.0 2.48 63.2 527.0 79.7 3 80 3.50 88.9 3.09 78.5 682.6 103.2 7/2 90 4.00 101.6 3.57 90.7 831.0 125.6 4 100 4.50 114.3 4.05 102.9 972.3 147.0 5 125 5.56 141.3 5.07 128.9 1313.6 198.6 6 150 6.62 168.3 6.09 154.8 1745.3 263.9 In mm Outside Diameter 10 0.67 17.1 0.49 12.5 1/2 15 0.84 21.3 0.63 3/4 20 1.05 26.7 1 25 1.31 5/4 32 3/2 40 3/8 51.5 7.8 Pipe Comparison Data Technical Data Nominal Pipe Size In 3/8 1/2 3/4 1 5/4 3/2 2 5/2 3 7/2 32 4 5 6 8 10 12 14 16 18 20 24 28 32 36 40 mm Outside Diameter DIN(mm) ISO(mm) 10 14 17.2 15 20 21.3 20 25 26.9 25 30 33.7 32 38 42.4 40 44.5 48.3 50 57 60.3 65 76.1 76.1 80 88.9 88.9 90 101.6 101.6 100 108 114.3 125 133 139.7 150 159 168.3 200 216 219.1 250 267 273.0 300 318 323.9 350 368 355.6 400 419 406.4 450 459 457.2 500 521 508.0 600 622 609.6 700 720 711.2 800 820 812.8 900 920 94.4 1000 1020 1016.0 Intermediate Metal Conduit (IMC) In mm 3 -6 In mm Minimum Weight with Couplings Attached In mm 15 0.81 20.7 0.74 18.9 3/4 20 1.02 26.1 0.95 24.2 82.0 12.4 1 25 1.29 32.7 1.20 30.6 116.0 17.5 5/4 32 1.63 41.6 1.55 38.9 150.0 22.6 3/2 40 1.88 47.8 1.79 45.5 182.0 27.3 Lbs/100Ft. 60.0 Kg/10 m 0.7 2 50 2.36 59.9 2.26 57.5 242.0 36.5 5/2 65 2.85 72.5 2.72 69.2 401.0 60.6 3 80 3.47 88.3 3.34 85.0 493.0 74.5 7/2 90 3.97 100.8 3.84 97.5 573.0 86.6 4 100 4.46 113.4 4.33 110.1 638.0 96.4 Maximum Support Span mm Feet 10 15 - 20 25 32 - 40 50 - 65 80 -150 Conduit plus weight of heaviest conductor combination as specified by the National Electrical Code. Rigid and Intermediate Metal Conduit shall be supported at least every 10 feet (3.05m) and within 3 feet (914mm) of each outlet box, junction box, cabinet, or fitting. Except for straight runs of conduit connected with couplings which may be supported in accordance with NEC Article 345 and 346, provided such supports prevent transmission of stresses to termination where conduit is deflected between supports. Meters 3.00 12 3.60 14 4.30 16 4.90 20 6.00 Electrical Metallic Tubing (EMT) Thinwall Conduit Conduit plus weight of heaviest conductor combination as specified by the National Electrical Code. Electrical Metallic tubing shall be supported at least every 10 feet and within 3 feet (914mm) of each outlet box, junction box, cabinet, or fitting. See NEC Article 348. Nominal Conduit Size In Dimensions taken from ANSI C80.3-1977 1/2 - 3/4 1 5/4 - 3/2 2 - 5/2 Nominal Inside Diameter 1/2 Conduit Size In Outside Diameter mm Outside Diameter In Nominal Inside Diameter mm Minimum Weight with Couplings Attached mm In 3/8 10 0.57 14.7 0.49 12.5 Lbs/100 Ft. 23.0 3.4 Kg/10m 1/2 15 0.70 17.9 0.62 15.8 28.5 4.3 3/4 20 0.92 23.4 0.82 20.9 43.5 6.5 1 25 1.16 29.5 1.04 26.6 64.0 9.6 5/4 32 1.51 38.3 1.38 35.1 95.0 14.3 3/2 40 1.74 44.2 1.61 40.9 110.0 16.6 2 50 2.19 55.8 2.06 52.5 140.0 21.1 5/2 65 2.87 73.0 2.73 69.4 205.0 31.0 3 80 3.50 88.9 3.35 85.2 250.0 37.8 7/2 90 4.00 101.6 3.83 97.4 325.0 49.1 4 100 4.50 114.3 4.33 110.1 370.0 55.9 Technical Data Nominal Conduit Size 33 Rigid Aluminum Conduit Dimensions taken from ANSI C80.5-1977. Nominal Conduit Size Outside Diameter Conduit Size Technical Data In 34 In mm In mm In 15 0.84 21.3 0.63 16.1 27.4 5.3 3/4 20 1.05 26.7 0.83 21.2 36.4 12.4 1 25 1.31 33.4 1.06 27.0 53.0 17.5 5/4 32 1.66 42.2 1.39 35.4 69.6 22.6 3/2 40 1.90 48.3 1.62 41.2 82.2 27.5 50 2.37 60.3 2.08 52.9 115.7 36.5 65 2.87 73.0 2.48 63.2 182.5 60.6 3 80 3.50 88.9 3.09 78.5 238.9 74.5 7/2 90 4.00 101.6 3.57 90.7 287.7 86.6 4 100 4.50 114.3 4.05 102.9 340.0 51.4 5 125 5.56 141.3 5.07 128.9 465.4 70.3 6 150 6.62 168.3 6.09 154.8 612.5 92.6 Meters 3.00 25 12 3.60 5/4 - 3/2 32 - 40 14 4.30 2 - 5/2 50 - 65 16 4.90 3-6 80 -150 20 6.00 1 Kg/10m 2 10 15 - 20 Lbs/100 Ft. 5/2 Feet 1/2 - 3/4 mm Minimum Weight with Couplings Attached 1/2 Maximum Support Span mm Nominal Inside Diameter Conduit plus weight of heaviest conductor combination as specified by the National Electrical Code. Aluminum Rigid Conduit shall be supported at least every 10 feet (3.05m) and within 3 feet (914mm) of each outlet box, junction box, cabinet, or fitting. Except for straight runs of conduit connected with couplings which may be supported in accordance with NEC Table 346-12, provided such supports prevent transmission of stresses to termination where conduit is deflected between supports. Copper Tubing, Type L In mm Outside Diameter In mm Nominal Inside Diameter In Minimum Weight with Couplings Attached mm Lbs/100 Ft. Kg/10 m 3/8 10 0.67 17.1 0.49 12.5 57.0 8.6 1/2 15 0.84 21.3 0.62 15.8 85.0 12.8 3/4 20 1.05 26.7 0.82 20.9 113.0 17.1 1 25 1.31 33.4 1.04 26.6 168.0 26.0 5/4 32 1.66 42.2 1.38 35.1 227.0 34.3 3/2 40 1.90 48.3 1.61 40.9 272.0 41.1 2 50 2.37 60.3 2.06 52.5 365.0 55.2 5/2 65 2.87 73.0 2.46 62.7 579.0 87.5 3 80 3.50 88.9 3.06 77.9 758.0 114.6 7/2 90 4.00 101.9 3.54 90.1 911.0 137.6 4 100 4.50 114.3 4.02 102.3 1079.0 163.1 5 125 5.56 141.3 5.04 128.2 1462.0 221.0 6 150 6.62 168.3 6.06 154.1 1897.0 286.8 8 200 8.62 219.1 10.02 202.7 2855.0 431.6 10 250 10.75 27.1 7.98 254.5 4048.0 612.0 12 300 12.75 323.1 12.00 304.8 4956.0 749.3 14 350 14.00 355.6 13.25 336.6 5457.0 825.1 16 400 16.00 406.4 15.25 387.4 6258.0 946.2 18 450 18.00 457.2 17.20 438.2 7059.0 1067.3 20 500 20.00 508.0 19.25 489.0 7860.0 1188.4 24 600 24.00 609.6 23.25 590.6 9462.0 1430.6 Schedule 40 PVC Plastic Pipe Nominal Conduit Size In 1/8 mm 3 Outside Diameter In 0.40 mm Nominal Inside Diameter In 10.3 0.26 mm 6.8 Minimum Weight with Couplings Attached Lbs/100 Ft. Kg/10 m 4.7 0.7 9.2 1/4 6 0.54 13.7 0.36 8.2 1.2 3/8 10 0.67 17.1 0.49 12.5 10.9 1.6 1/2 15 0.84 21.3 0.62 15.8 16.4 2.4 3/4 20 1.05 26.7 0.82 20.9 21.8 3 1 25 1.31 33.4 1.04 26.6 32.1 4.8 5/4 32 1.66 42.2 1.38 35.1 43.4 6.5 3/2 40 1.90 48.3 1.61 40.9 51.8 7.8 2.37 60.3 2.06 52.5 69.5 10.3 62.7 109.6 16.5 77.9 143.5 21.7 2 50 5/2 65 2.87 73.0 2.46 3 80 3.50 88.9 3.06 7/2 90 4.00 101.6 3.54 90.1 175.6 26.5 4 100 4.50 114.3 4.02 102.3 204.3 30.9 5 125 5.56 141.3 5.04 128.2 281.7 42.6 6 150 6.62 168.3 6.06 154.1 360.9 54.5 8 200 8.62 219.1 7.98 202.7 545.3 82.4 10 250 10.75 273.1 10.02 254.5 791.3 119.6 12 300 12.75 323.9 11.93 303.2 1035.2 156.5 Technical Data Nominal Conduit Size 35 In.To convert From Multiply by To Foot2 square meter (m2) 9.290304X10-2 Inch2 square meter (m2) 6.451600 x 10-4 sq centimeter (cm2) square meter (in2) 1.550003 x 10-1 square meter (m2) foot2 1.076391 x 10+1 square meter (m2) inch2 1.550003 x 10+3 square meter (m2) circular mil 1.973523 x 10+9 Temperature degree Fahrenheit degree Celsius degree Celsius t°C = (t°F 32)/1.8 degree Fahrenheit t°F = 1.8 t°C +32 Force newtons (N) 4.448222 x 10° foot (ft) meter (m) 3.048000 x 10-1 inch (in) meter (m) -2 inch (in) micrometer (μm) pounds-force (lbf) Length 2.540000 x 10 2.540000 x 10+4 meter (m) foot (ft) meter (m) inch (in) 3.937008 x 10 micrometer (μm) inch (in) 3.937008 x 10-5 cubic meter (m3) 2.831685 x 10-2 cubic meter (m3) 1.638706 x 10-5 Volume foot3 inch3 3 cubic centimeter (cm ) 3.280840 3 cubic inch (in ) cubic meter (m3) foot3 cubic meter (m3) inch3 gallon (U.S. liquid) cubic meter (m3) 6.102374 x 10 4 6.102376 x 10 S (m3) modulus of elasticity E (psi) E (Pa) 6.894757 x 10+3 moment of inertia I (m ) modulus of elasticity E (Pa) Bending Moment or Torque 4 3 S (in ) 6.102374 x 10+4 I (in4) 2.402510 x 10+6 E (psi) 1.450377 x 10-4 lbf . ft newton meter (N . m) 1.355818 lbf . in newton meter (N . m) 1.129848 * 10-1 N.m lbf . ft 7.375621 * 10-1 N.m lbf . in 8.850748 ounce (avoirdu pois) kilogram (kg) 2.834952 * 10-2 pound (avoirdu pois) kilogram (kg) -1 4.535924 * 10 kilogram (kg) ounce (avoirdu pois) 3.527396 * 10+1 kilogram (kg) pound (avoirdu pois) 2.204622 lb/ ft kilogram per meter (kg/ m) 1.488164 lb/ in kilogram per meter (kg/ m) 1.785797 * 10+1 kg/ m lb/ft 6.719689 * 10-1 kg/ m lb/in 5.599741 * 10-1 Mass Per Unit Length kilogram per cubic meter (kg/ m3) 3 lb/ ft 3 3 kilogram per cubic meter (kg/ m ) lb/ in kg/ m3 lb/ft3 kg/ m3 lb/in3 lbs/ ft3 lbs/in3 Mass Per Unit Area lb/ft2 2 kg/m Pressure or Stress lbf/ in2 (psi) 2 kip/ in (ksi) lbf/ in2 (psi) pascal (Pa) pascal (Pa) megapascals (MPa) 1 gallon (U.S) weighs 8.335 Lbs. 1 Liter weighs .999 Kg. kilogram per square meter (kg/ m2) pound per square foot (lb/ ft2) N/ mm2 2 N/ mm +4 6.242797 * 10-2 3.612730 * 10 S.F.: Safety Factor Pre-galv: Pre-galvanized Steel K Factor: Deflection divided by loads in LBS/FT o.c.: On Center PVC: Poly Vinyl Chloride 1.601846 * 10+1 2.767990 * 10 Abbreviations Defl.: Deflection Ft.: Feet Mass Mass Per Unit Volume 1 cubic meter of water weighs 999.972 Kg. 1.638706 x 10-5 4.162314 x 10-7 4 1 cubic ft. of water weighs 62.41 Lbs 3.785412 x 10-3 I (m ) section modulus S (m ) Conversion Table +4 moment of inertia I (in ) 3 36 -2 3.531466 x 10+1 Section Properties section modulus S (in3) +1 Metric Conversion Chart Dimensions taken from ASTM A53-82 In: Inch psi: Pound per Square Inch kg: Kilogram N: Newton KN: Kilonewton Pa: Pascal MPa: Megapascal -5 1.728000 * 10+3 4.882428 2.048161 * 10-1 6.894757 * 10+9 6.894757 * 10+12 megapascals (MPa) 6.894757 * 10-3 N/ mm2 1.019350 * 10-6 kip per square inch (ksi) 1.450377 * 10-7 lbf/ in2 (psi) 1.450377 * 10+2 Metric Symbols m: meter cm: centimeter mm: mellimeter μm: micrometer