B
1
2
3
CLIP-IN LUG FOR RETRACTABLE SLIDING SCREEN
70
PATH FOR CLIP-IN LUG FOR RETRACTABLE SLIDING SCREEN
600
600
ALUMINIUM LIPPED CHANNEL EXTENDED CURVATURE
SUPPORTS
ALUMINIUM LIPPED CHANNEL EXTENDED CURVATURE SUPPORTS
OPENINGS IN PERSPEX SHEET FOR HAND GRIP
OPENINGS IN PERSPEX SHEET FOR HAND GRIP
566
200
2,150
30x20mm ALUMINIUM RECT. TUBE FRAME
A
40x15mm ALUMINIUM LIPPED CHANNEL MULLION
1,550
806
40x15mm ALUMINIUM LIPPED CHANNEL MULLION
SEATING BY SPECIALIST
SEATING BY SPECIALIST
SEATING BRACKET BY SPECIALIST
SEATING BRACKET BY SPECIALIST
MOUNTING PLATFORM MANUFACTURED OUT OF MILD
MOUNTING PLATFORM MANUFACTURED OUT OF MILD
STEEL TUBES
CASTORS BY SPECIALIST
NGL
50
2
PLAYERS BENCH TYPICAL SIDE
ELEVATION
Scale 1:10
3
1
B
3
PLAYERS BENCH - TYPICAL
FRONT ELEVATION
Scale 1:10
DETAIL 1 - EDGE OF
FRAME
Scale 1:1
1
30x20mm SQUARE TUBE ALUMINIUM FRAME
575
DETAIL 2-CENTRE OF
FRAME
Scale 1:1
40x15mm LIPPED CHANNEL MULLION
3mm FULL TRANSLUCENT PERSPEX RETRACTABLE SCREEN
CLIP-IN LUG FOR RETRACTABLE SLIDING SCREEN
100
A
NGL
102
NGL
3
2
CLIP-IN LUG FOR RETRACTABLE SLIDING SCREEN
NEOPRENE SEALING STRIPS
GLAZING CLIP WITH SCREW RECESS A
GLAZING CLIP COUNTERSUNK FIXING SCREW
A
40x15mm ALUMINIUM LIPPED CHANNEL MULLION
SETTING BLOCK
ALUMINIUM LIPPED CHANNEL EXTENDED CURVATURE SUPPORTS
4mm FULL TRANSLUCENT PERSPEX STATIC BACK SCREEN
145
CASTORS BY SPECIALIST
NGL
128
STEEL TUBES
145
SEATING BRACKET BY
SPECIALIST
SEATING BY SPECIALIST
MOUNTING PLATFORM MANUFACTURED OUT OF MILD STEEL
TUBES
30x20mm ALUMINIUM RECTANGULAR TUBE FRAME
B
B
1
STEEL PAINT NOTE :
ALL MILD STEELWORK TO BE PRIMED
AND PAINTED WITH 'DULUX' GLOSS
STEEL PAINT. COLOUR TO ARCHITECT.
90 45
Handrail Elevation
Scale 1:10
20 60
20
100
200mm thick masonry
walling finish.
100
400
chrome plated pillar tap
100
8mm thick granite top laid to approval.
40
32mm mortar.
12mm plater.
140
710
45 50 60
60mm DIA, 1,6mm WALL THICKNESS
STAINLESS STEEL ROUND HORISONTAL
HANDRAIL. (BRUSHED)
DOUBLE HORIZONTAL FLATBARS
WELDED TO SIDES OF FLATBAR POSTS
(50x6mm)
50x6mm THICK MILD STEEL DOUBLE
FLATBAR HANDRAIL POSTS WELDED
TO BASEPLATES AND SPACED AT
APPRX. 1050mm C/C DOUBLE FLATBARS
TO BE SPACED 50mm APART
20x20mm MILD STEEL SQUARE TUBE
VERTICAL BARS SPACED
AT APPROX . 120mm CENTRES.
DOUBLE HORIZONTAL FLATBARS
WELDED TO SIDES OF FLATBAR POSTS
(50x6mm)
200x150x8mm STAINLESS STEEL
BASEPLATE FIXED TO CONCRETE
WITH 2x M8 EXPANSION BOLTS
PER VERTICAL.
UNFINISHED LEVEL
20
90
TOP RAIL TO BE STRAIGHT SECTIONS.
SECTIONS TO CHANGE DIRECTION ON
TOP OF VERITAL FLAT BAR POSTS.
120
20
170
600
1,000
1,000
45 50 60
710
200x150x8mm STAINLESS STEEL BASEPLATE
FIXED TO CONCRETE WITH 2x M8 EXPANSION
BOLTS PER VERTICAL.
45
1,000
20x20mm MILD STEEL SQUARE TUBE VERTICAL
BARS SPACED AT APPROX . 120mm CENTRES.
DOUBLE HORIZONTAL FLATBARS
WELDED TO SIDES OF FLATBAR POSTS (50x6mm)
3
PLAYERS BENCH - SECTION
A-A
Scale 1:10
DRAWING NO.1
60mm DIA, 1,6mm WALL THICKNESS STAINLESS
STEEL ROUND HORISONTAL HANDRAIL. (BRUSHED)
DOUBLE HORIZONTAL FLATBARS WELDED
TO SIDES OF FLATBAR POSTS (50x6mm)
50x6mm THICK MILD STEEL DOUBLE
FLATBAR HANDRAIL POSTS WELDED TO
BASEPLATES AND SPACED AT APPRX . 1050mm
C/C DOUBLE FLATBARS TO BE SPACED 50mm APART
2
'TYFORDS' Galerie countertop basin
500mmx400mm with Panama mixer
100mm thick r.c top to S.E's detail.
water from mains.
TO STEEL FRAME WITH SELF TAPPING SCREWS AND
HOLES TO BE FILLED WITH MERANTI WOOD FILLER.
cabinet base drawer no.1
450
cabinet base drawer no.2
90
600X600MM CERAMIC TILES AS
PER SPEC.
WHB FIXING(SCALE 1:10)
1,000
EXISTING CONCRETE SLAB.
60
50
50
0
85
DOUBLE HORIZONTAL FLATBARS
WELDED TO SIDES OF FLATBAR POSTS
(50x6mm)
135
135
25
200x150x8mm STAINLESS STEEL
BASEPLATE FIXED TO CONCRETE
WITH 2x M8 EXPANSION BOLTS
PER VERTICAL.
UNFINISHED CONC. STAIR LEVEL
Mirror screw with chrome dome.
6mm thick plate glass at 800MMc/c.
2-coats silicone adhesive..
12mm thick plaster on walling.
50
135
135
Typical Stair Handrail Elevation
Scale 1:10
200mm stone masonry walling.
MIRROR FIXING(SCALE 1:10)
ALL TESTING OF PIPES MUST
BE COMPLETED BEFORE
PLASTERING
ALL MECHANICAL WORKS
MUST BE COORDINATED
WITH ELECTRICAL AND ANY
CONFLICT MUST BE CLARIFIED
BEFORE WORK BEGINS
PV DENOTES PERMANENT
50x50x4mm MILD STEEL SQUARE TUBE FRAME FOR
WOODEN SLATS TO BE SPACED AT APPRX. 500mm C/C. FIX VENTILATION
TO WALL WITH APPROPRIATE SIZED EXPANSION BOLTS ELECTRICAL
50
DOUBLE HORIZONTAL FLATBARS
WELDED TO SIDES OF FLATBAR POSTS
(50x6mm)
50x6mm THICK MILD STEEL DOUBLE
FLATBAR HANDRAIL POSTS WELDED
TO BASEPLATES AND SPACED AT
APPRX. 1050mm C/C DOUBLE FLATBARS
TO BE SPACED 50mm APART
20x20mm MILD STEEL SQUARE TUBE
VERTICAL BARS SPACED
AT APPROX . 120mm CENTRES.
1,080
60mm DIA, 1,6mm WALL THICKNESS
STAINLESS STEEL ROUND HORISONTAL
HANDRAIL. (BRUSHED)
STAINLESS
STEEL
BALUSTRADE
DETAIL
5mm FLAT STEEL EDGE PIECE
WELDED TO OPENING.
140
450
Handrail Section
Scale 1:10
40
CLIP-IN LUG FOR RETRACTABLE SLIDING SCREEN
1000
A
50
2,080
1,125
490
PATH FOR CLIP-IN LUG FOR RETRACTABLE SLIDING SCREEN
NOTES
ALL DIMENSIONS ARE IN mm
UNLESS OTHERWISE STATED
DRAWINGS ARE NOT TO BE
SCALED.ALL FIGURED
DIMENSIONS TO BE USED
THE CONTRACTOR MUST CHECK
AND VERIFY ALL DIMENSIONS
Ø50mm STAINLESS STEEL
BEFORE COMMENCEMENT
RAIL AS PER 'ALIWAL' BALUSTRADE
SYSTEM (STEEL STUDIO) OR
OF ANY WORK
EQUAL APPROVED
CONSTRUCTION
ALL SLAB AT GROUND LEVEL TO
BE POURED OVER 1000 GAUGE
POLYTHENE SHEET ON 50MM
THICK MURRAM BLINDING
ON HARDCORE
ALL SOIL UNDER SLAB,AROUND
Ø25mm
INTERMIDIATE
AND UNDER FOUNDATION TO
RAIL
BE POISONED FOR TERMITE
CONTROL
Ø38mm STAINLESS STEEL
CIVIL
POST AS PER 'ALUWAL'
ALL SOIL ON CUT EMBANKMENT
BALUSTRADE SYSTEM OR
30x30x3mm BRUSHED
EQUAL APPROVED AT MAX
TO BE STABILIZED.THE SLOPE
1600mm CENTRES, PIN
STAINLESS STEEL ANGLE
NOT TO EXCEED THE NATURAL
CONNECTION AT TOP, CORE
ANGLE OF REPOSE
DRILLED AND FIXED WITH
STRUCTURAL
EPOXY AT THE BOTTOM.
COVER PLATE REQUIRED.
ALL BLACK COTTON SOIL TO BE
POSTS TO EXTEND MIN 150mm
8 10 18
REMOVED FROM ALL BUILDINGS
INTO THE BRICKWORK.
AND PAVED SURFACES
MARMORAN FINISH
FOR ALL R.C. WORK REFER TO
ON PLASTER
S.E.'S DETAILS
18 18
230
15
DEPTH OF FOUNDATION TO BE
TIMBER SKIRTING
DETERMINED ON SITE TO S.E.'S
CERAMIC TILE / MARBLE
APPROVAL
FLOOR FINISH
ALL WALLS LESS THAN 150MM
THICK TO BE REINFORCED WITH
HOOP IRON AT EVERY ALTERNATE
REINFORCED CONCRETE
COURSE
SLAB AS PER STRUCTURAL ALL ADJACENT R.C. WORK AND
MASONRY WALLS TO BE TIED
ENGINEER'S DRAWINGS
WITH STRIP IRON AT EVERY
ALTERNATE
6.4mm THICK RHINOBOARD
MECHANICAL
CEILING VOID
TYPE CEILING FIXED TO
ALL PLUMBING AND DRAINAGE
38x38mm S.A. PINE SUSPENDED
TO COMPLY WITH RELEVANT
LOCAL AUTHORITY
SVP DENOTES SOIL VENT PIPE
TO BE PROVIDED AT THE END OF
TIMBER FRAMEWORK WITH
THE DRAINAGE SYSTEM
BRANDERING AT 400mm CONERS
DRAIN PASS BENEATH
NAILED AT 150mm CONERS. APPLY
BUILDINGS AND DRIVEWAYS
'FIBATAPE' OVER ALL JOINTS.
TO BE ENCASED IN 150MM
FIX WITH STAPLES AND APPLY
CONCRETE SURROUND
3-6mm RHINOLITE PLASTER.
STAINLESS
STEEL
STORM DRAIN PIPES TO COMPLY
PAINT AS PER PAINT SPEC.
BALUSTRADE DETAIL
WITH BS556 SPECIFICATIONS
ALL UNDERGROUND FOUL AND
WASTE DRAIN PIPES SHALL BE
uPVC TO COMPLY WITH BS 5255
ALL INSPECTION CHAMBER
COVERS AND FRAMING SHALL
BE CAST IRON
MINIMUM SLOPE IN THE DRAIN
PIPES TO BE IN 100
NO CHASES WILL BE ALLOWED
FOR PIPES ,SLEEVES WILL BE
ALLOWED WITH WRITTEN
CUT LINE
APPROVAL OF STRUCTURAL
ENGINEER.NO CUTTING OF
200mm BRICK WALL WITH ONE COAT PLASTER AND THREE COATS CONCRETE WITHOUT EXPRESS
EMULSION PAINT.
AND WRITTEN INSTRUCTIONS
FROM THE STRUCTURAL
CERAMIC TILES AS PER SPEC.
ENGINEER
40x40mm WATER TREATED PLANED MERANTI SLATS FIXED
85 25 85 25 85 25 110
A
ALL STEELWORK TO BE PRIMED AND PAINTED WITH 2 COATS GLOSS STEEL
PAINT.COLOUR TO BE SPECIFIED.
TYPICAL BENCH DETAIL(INSIDE
THE LOCKEROOMS)
Scale 1:10
DRAWING NO.2
ALL CONDUITS MUST BE LAUD
BEFORE PLASTERING
VALLYVAL LTD.
Street:Popo Street
City:Nairobi
State/Country:Kenya
Postal Code:00100
JOB TITLE:PROPOSED MINI
STADIUM ON LR. NO. 209/18221,
NAIROBI FOR UNIVERSITY OF
NAIROBI P.O BOX 29288-00100
NRB
DETAILS
DRAWING TITLE:
Drawn by
Valentine Makena Munyua
Checked by
Drawing Scale 1:100
JOB NO. LL1/2012
Drawing no.001
Date: 31/5/2012
Date