Bottle Cage Riser
Bottle Cage Riser
Version:
©ICE
2014
Inspired Cycle Engineering Ltd • www.icetrikes.co • info@icetrikes.co • Tel: +44 (0) 1326 378848
Version:1/14
1
2
3
The pack contains, 6 x Washers, 2 x 16mm
Bolts, 2 x 12mm Bolts, 2 x Nuts and the
bottle cage riser.
Using a 12mm bolt, nut and washers, bolt
the bottom of your bottle cage to the tab
on the longest side of the bottle cage riser.
Tighten the bolts so that the cage can
rotate under pressure but not freely.
Using a 16mm bolt and washer connect the
riser mount to the cruciform with the tabs
facing forwards & down. Leave this bolt
slighty loose.
4
5
Using the other 16mm bolt and washer fix
the riser mount to the cruciform and tighten
both 16mm bolts.
Finally rotate the bottle cage and connect it
to the second tab using the 12mm bolt, nut
and washers.
Inspired Cycle Engineering Ltd • www.icetrikes.co • info@icetrikes.co • Tel: +44 (0) 1326 378848
02/13
1
2
3
The pack contains, 6 x Washers, 2 x 16mm
Bolts, 2 x 12mm Bolts, 2 x Nuts and the
bottle cage riser.
Using a 12mm bolt, nut and washers, bolt
the bottom of your bottle cage to the tab
on the longest side of the bottle cage riser.
Tighten the bolts so that the cage can
rotate under pressure but not freely.
Using a 16mm bolt and washer connect the
riser mount to the cruciform with the tabs
facing forwards & down. Leave this bolt
slighty loose.
4
5
Using the other 16mm bolt and washer fix
the riser mount to the cruciform and tighten
both 16mm bolts.
Finally rotate the bottle cage and connect it
to the second tab using the 12mm bolt, nut
and washers.
Version:
©ICE
2014
Inspired Cycle Engineering Ltd • www.icetrikes.co • info@icetrikes.co • Tel: +44 (0) 1326 378848
Version:1/14
02/13