er3 led series - Elite Lighting

advertisement
ER3 LED SERIES
MODERN, ADJUSTABLE,
IC/NON-IC LUMINAIRES
UP TO
2000
ER3
Rotates:
Horizontally
359º
Vertically 45º
Lockable
Horizontal Rotation
Trim’s adjustability:
The central light system is designed to
emerge the center beam of the light source
out of fixture by rotating 359° horizontally
and 45° vertically with a screw driver.
The sytem is lockable at both the vertical
and the horizontal plane.
Vertical Rotation
359º
45º
35º
25º
15º
5º
0º
MX
A VARIETY OF
TRIM OPTIONS:
Open downlight
Lensed
Lensed trimless
Open wall wash
Lensed wall wash
Lensed trimless wall wash
BLANK 2
Pinhole
FUSION ER3 IC SERIES LED DOWNLIGHT
LED ER3 RECESSED
Open downlight
Lensed
Lensed trimless
Pinhole
Rotates:
Horizontally
359º
Vertically 45º
Lockable
Open wall wash
Lensed wall wash
900
ER3
INPUT VOLT. INPUT FREQ.
120/277
120/277
50/60Hz
50/60Hz
Lensed trimless wall wash
INPUT CUR.
INPUT POWER
>0.9
>0.9
900
650
Fixture is designed to ensure the
center beam of the light bulb emerges
out of fixture at any angled position
from 0º to 359° horizontally and 0º
to 45° vertically with a screw driver.
DESCRIPTION:
3” LED Round Recessed directional, accent, and downlight fully adjustable luminaire, is ideal for retail, hospitality, commercial, and high-end residential applications.
Designed for new construction installations and suitable for use in insulation covered. Lighting is smooth and comfortable while using 75% less energy than the
equivalent 65W BR30 & 75W BR30 and 25% less than the common 18W & 26W CFL luminaire. Plus, the eco-friendly Elite LED system features 70% lumen
maintenance at 50,000 hours life, with Energy Star and California Title-24 (compliances pending).
HOUSING:
Thermally protected, specification grade adjustable recessed housing. For
new construction insulated ceilings where housing will be in direct contact
with insulation. Die-formed all aluminum construction matt black painted for
maximum heat dissipation, rust protection and glare free illumination.
F U S I FUSION
O N FC
E RMETAL
3 I C
S E SERIES
R I E S
HALIDE
L E D
443-A
THD POWER FACTOR LUMENS
150mA/65mA 18W(+/-5%) <20%
116mA/50mA 14W(+/-5%) <20%
ADJUSTABILITY
COLLAR BRACKET:
Adjusts vertically and can accommodate any ceiling from ½” up to 1” thickness.
Please consult factory for custom or thicker ceiling applications. Integral laser
beam slots allow the use of guide strings or leveling laser guns to ensure that all
luminaries are installed in an level and straight plane. Collar can be rotated up to
45° once the housing is installed in the ceiling (prior to having drywall installed).
TRIM OPTION:
Post painted powder coated Die-Cast trim ring available in white and chrome.
Please consult factory for custom paint color options. Collar and trim rotate
jointly. Solite Frosted Lens is standard on all trims. Please consult factory for
additional lens options. Available in lensed adjustable downlight or lensed
adjustable wallwash.
TRIM- LESS:
Die-Cast perforated meshcover intended for installation in drywall or plaster
ceilings. Mudding maybe applied right up to the edge of the fixture opening to
provide seamless appearance. Trim-Less accessory is secured to the housing
to prevent fractures in the ceiling and or drywall during and after installation.
AIMING:
Fusion ER3’s proprietary hot aiming system allows the lamp to be positioned
at the perfect setting to ensure the proper position of the beam of light before
trim is installed. Lamp holder is designed to ensure that the center beam of the
light bulb emerges out of fixture at any angled position from 0° to 45°. The lamp
holder contains degree markings, rotates 359° horizontally and 45° vertically
with a screw driver. The lamp holder is lockable at both the vertical and the
horizontal plane. The integrity of the design and lamp positioned are kept during
relamping or servicing the fixture.
ELECTRICAL/ TRANSFORMER:
Junction box and transformer maybe accessed from below the ceiling and above
the ceiling. Junction Box is Listed for through branch circuit wiring,12 AWG
90º C supply Conductors, and has four 1/2” KOs, one 3/4” KO and four Romex
knockouts with true pry-out slots and strain clamps. Transformer supplied is
thermally protected Class II dimming electronic transformer enhanced in heat
dissipating cover attached to junction box cover. De-rated lamp wattage labeling
is available please consult factory.
MOUNTING:
Preinstalled bar hangers allow housing to be positioned and locked at any point
within a 24” joist span. They can be positioned on either the long or short axis of
the housing and can be shortened for 12” joists. They contain a double-headed
real nail for secure attachment into the joist. Bar hanger nails are installed on
a 20º downward angle for better contact, and the 90º pivoting mounting plate
makes installation fast and accurate. Bar hangers can fit onto T-Bar spline with
additional slots and holes for special mounting methods if necessary. Butterfly
brackets are also provided and are constructed from 18-gauge steel and can
be adjusted vertically. Butterfly brackets may be installed with 3/4” or 1-1/2”
lathing channel, 1/2” EMT, or optional C-Channel mounting bars are available.
LABELS:
c-UL-us listed for damp location.
c-UL-us listed for feed Through Wiring.
c-UL-us listed for direct contact with insulation.
WARRANTY:
Fusion ER Recessed luminaries are covered by Fusion’s one year limited
warranty. As a system, we stand behind our entire products from housing to
bar hangers.
WWW.IUSEFUSION.COM • TEL 1-877-375-5555 • FAX 1-877-375-3333
FUSION ER3 IC SERIES LED DOWNLIGHT
LED ER3 RECESSED
Open downlight
1302
Lensed Downlight
1328
Lensed trimless Downlight
ETS
Open wall wash
1363
Lensed wall wash
1307
Lensed trimless wall wash
ETSW
Pinhole
1314
3”
3”
7”
ER3
7”
16”
10”
4”
5-3/8”
F U S I O N
ER3-T-Housing
ER3-F-Housing
3”
4”
ORDERING INFORMATION
E R 3
Example: ER3-F-LED-IC-900L-DIMTR-120-30K-EFS-1302-W-WH
LUMINAIRE SELECTION
IC
HOUSING TYPE
SERIES
FLANGE OPTION
LIGHT SOURCE
ES3
F - (Flanged)
T - (Trimless)
LED
IC - New
construction
insulated ceiling
LUMENS
650L
900L
DIMMING
DIMTR-120
LUTH-120
LUTH-277
DIM10-MVOLT
CCT
ACCESSORIES/OPTIONS
OPTIONS
27K
30K
35K
40K
50K
blank - Standard bar
hangers (included)
BP31 - 27” C-channel
bar hangers
RIF - RIF filter
S E R I E S
LED
I C
ES3
-
TRIM OPTION SELECTION
L E D
TRIM FLANGE OPTION
EFS - Flanged trim
ETS - Trimless Downlight
ETSW - Trimless Wall
Wash
TRIM
1302
1328
1363
1307
1314
TRIM COLOR
- Open Downlight W-WH - White
- Lensed Downlight CL-WH - Chrome
- Open Wall Wash B-WH - Black
- Lensed Wall Wash
- Pinhole
TRIM ACCESSORIES
BP-ES3-MR16-CL - Clear Lens
BP-ES3-MR16-LI - Linear spread Lens
BP-ES3-MR16-SP - Spread/Prismatic Lens
BP-ES3-MR16-SO - Solite Lens
BP-ES3-MR16-UV - Anti UV/Ultraviolet Lens
Due to the changes of constant improvement in lighting technology, all details are subject to change without notice.
Consult factory for up to date information.
443-B
FUSION ER3 NON-IC SERIES LED DOWNLIGHT
LED ER3 RECESSED
Open downlight
Lensed
Lensed trimless
Pinhole
Rotates:
Horizontally
359º
Vertically 45º
Lockable
Open wall wash
2000
ER3
Lensed wall wash
INPUT VOLT. INPUT FREQ.
120/277
120/277
50/60Hz
50/60Hz
Lensed trimless wall wash
INPUT CUR.
INPUT POWER
THD
266mA/115mA
200mA/86mA
32W(+/-5%)
24W(+/-5%)
<20%
<20%
>0.9
>0.9
2000
1200
Fixture is designed to ensure the
center beam of the light bulb emerges
out of fixture at any angled position
from 0º to 359° horizontally and 0º
to 45° vertically with a screw driver.
DESCRIPTION:
3” LED Round Recessed directional, accent, and downlight fully adjustable luminaire, is ideal for retail, hospitality, commercial, and high-end residential applications.
Designed for new construction installations and suitable for use in non insulation covered. Lighting is smooth and comfortable while using 75% less energy than
the equivalent 65W BR30 & 75W BR30 and 25% less than the common 18W & 26W CFL luminaire. Plus, the eco-friendly Elite LED system features 70% lumen
maintenance at 50,000 hours life, with Energy Star and California Title-24 (compliances pending).
HOUSING:
Thermally protected, specification grade adjustable recessed housing. For
new construction insulated ceilings where housing will be in direct contact
with insulation. Die-formed all aluminum construction matt black painted for
maximum heat dissipation, rust protection and glare free illumination.
F U S I O NFUSION
E R 3FC METAL
N O NHALIDE
- I C SERIES
S E R I E S
L E D
443-C
POWER FACTOR LUMENS
ADJUSTABILITY
COLLAR BRACKET:
Adjusts vertically and can accommodate any ceiling from ½” up to 1” thickness.
Please consult factory for custom or thicker ceiling applications. Integral laser
beam slots allow the use of guide strings or leveling laser guns to ensure that all
luminaries are installed in an level and straight plane. Collar can be rotated up to
45° once the housing is installed in the ceiling (prior to having drywall installed).
TRIM OPTION:
Post painted powder coated Die-Cast trim ring available in white and chrome.
Please consult factory for custom paint color options. Collar and trim rotate
jointly. Solite Frosted Lens is standard on all trims. Please consult factory for
additional lens options. Available in lensed adjustable downlight or lensed
adjustable wallwash.
TRIM- LESS:
Die-Cast perforated meshcover intended for installation in drywall or plaster
ceilings. Mudding maybe applied right up to the edge of the fixture opening to
provide seamless appearance. Trim-Less accessory is secured to the housing
to prevent fractures in the ceiling and or drywall during and after installation.
AIMING:
Fusion ER3’s proprietary hot aiming system allows the lamp to be positioned
at the perfect setting to ensure the proper position of the beam of light before
trim is installed. Lamp holder is designed to ensure that the center beam of the
light bulb emerges out of fixture at any angled position from 0° to 45°. The lamp
holder contains degree markings, rotates 359° horizontally and 45° vertically
with a screw driver. The lamp holder is lockable at both the vertical and the
horizontal plane. The integrity of the design and lamp positioned are kept during
relamping or servicing the fixture.
ELECTRICAL/ TRANSFORMER:
Junction box and transformer maybe accessed from below the ceiling and above
the ceiling. Junction Box is Listed for through branch circuit wiring,12 AWG
90º C supply Conductors, and has four 1/2” KOs, one 3/4” KO and four Romex
knockouts with true pry-out slots and strain clamps. Transformer supplied is
thermally protected Class II dimming electronic transformer enhanced in heat
dissipating cover attached to junction box cover. De-rated lamp wattage labeling
is available please consult factory.
MOUNTING:
Preinstalled bar hangers allow housing to be positioned and locked at any point
within a 24” joist span. They can be positioned on either the long or short axis of
the housing and can be shortened for 12” joists. They contain a double-headed
real nail for secure attachment into the joist. Bar hanger nails are installed on
a 20º downward angle for better contact, and the 90º pivoting mounting plate
makes installation fast and accurate. Bar hangers can fit onto T-Bar spline with
additional slots and holes for special mounting methods if necessary. Butterfly
brackets are also provided and are constructed from 18-gauge steel and can
be adjusted vertically. Butterfly brackets may be installed with 3/4” or 1-1/2”
lathing channel, 1/2” EMT, or optional C-Channel mounting bars are available.
LABELS:
c-UL-us listed for damp location.
c-UL-us listed for feed Through Wiring.
c-UL-us listed for direct contact with insulation.
WARRANTY:
Fusion ER Recessed luminaries are covered by Fusion’s one year limited
warranty. As a system, we stand behind our entire products from housing to
bar hangers.
WWW.IUSEFUSION.COM • TEL 1-877-375-5555 • FAX 1-877-375-3333
FUSION ER3 NON-IC SERIES LED DOWNLIGHT
LED ER3 RECESSED
Open downlight
1302
Lensed Downlight
1328
Lensed trimless Downlight
ETS
Open wall wash
1363
Lensed wall wash
1307
Lensed trimless wall wash
ETSW
Pinhole
1314
3”
3”
7”
ER3
7”
16”
10”
4”
5-3/8”
E R 3
ORDERING INFORMATION
N O N - I C
Example: ER3-F-LED-2000L-DIMTR-120-30K-EFS-1302-W-WH
LUMINAIRE SELECTION
ES3
LED
FLANGE OPTION
LIGHT SOURCE
LUMENS
ES3
F - (Flanged)
T - (Trimless)
LED
1200L
2000L
DIMMING
DIMTR-120
LUTH-120
LUTH-277
DIM10-MVOLT
CCT
ACCESSORIES/OPTIONS
OPTIONS
27K
30K
35K
40K
50K
blank - Standard bar
hangers (included)
BP31 - 27” C-channel
bar hangers
RIF - RIF filter
-
TRIM OPTION SELECTION
S E R I E S
SERIES
TRIM
1302
1328
1363
1307
1314
TRIM COLOR
- Open Downlight
W-WH - White
- Lensed Downlight CL-WH - Chrome
- Open Wall Wash
B-WH - Black
- Lensed Wall Wash
- Pinhole
TRIM ACCESSORIES
L E D
TRIM FLANGE OPTION
EFS - Flanged trim
ETS - Trimless Downlight
ETSW - Trimless Wall
Wash
F U S I O N
ER3-T-Housing
ER3-F-Housing
3”
4”
BP-ES3-MR16-CL - Clear Lens
BP-ES3-MR16-LI - Linear spread Lens
BP-ES3-MR16-SP - Spread/Prismatic Lens
BP-ES3-MR16-SO - Solite Lens
BP-ES3-MR16-UV - Anti UV/Ultraviolet Lens
Due to the changes of constant improvement in lighting technology, all details are subject to change without notice.
Consult factory for up to date information.
443-D
ES3 SERIES
40
30
20
10
0
10
20
30
MODERN
ADJUSTABLE
HIGH PERFORMANCE
DOWNLIGHT
40
Rotates:
Horizontally
359º
Vertically 45º
Lockable
Lamp holder is designed to emerge the center
beam of the light bulb out of fixture by rotating
359° horizontally and 45° vertically with a
screw driver.
10
20
30
40
50
The lamp holder is lockable at both the vertical
and the horizontal plane.
0
Low
Voltage
Metal
Halide
FUSION ES3 IC SERIES LED/LV DOWNLIGHT
LOW VOLTAGE MR16 ES3 SQUARE APERTURE RECESSED
Rotates:
Horizontally
359º
Vertically 45º
Lockable
ADJUSTABILITY
Lamp holder is designed to ensure the center
beam of the light bulb emerges out of fixture at
any angled position from 0º to 359° horizontally
and 0º to 45° vertically with a screw driver.
DESCRIPTION:
The 3 inch Square Recessed directional, accent, and downlight fully adjustable luminaire, is ideal for retail, hospitality, commercial, and high-end residential
applications. Designed around a low voltage MR16 tungsten-halogen lamp is available with different shielding options to maximize performance, and help accomplish
desired lighting environments.
ES3
F U S I O N
E FUSION
S 3 I C FCL METAL
E D /
L O W SERIES
V O LTA
HALIDE
G E
S E R I E S
446
HOUSING:
Thermally protected, specification grade adjustable recessed housing. For
new construction insulated ceilings where housing will be in direct contact
with insulation. Die-formed all aluminum construction matt black painted for
maximum heat dissipation, rust protection and glare free illumination.
COLLAR BRACKET:
Adjusts vertically and can accommodate any ceiling from ½” up to 1” thickness.
Please consult factory for custom or thicker ceiling applications. Integral laser
beam slots allow the use of guide strings or leveling laser guns to ensure that all
luminaries are installed in an level and straight plane. Collar can be rotated up to
45° once the housing is installed in the ceiling (prior to having drywall installed).
TRIM OPTION:
Post painted powder coated Die-Cast trim ring available in white. Please consult
factory for custom paint color options. Collar and trim rotate jointly. Solite Frosted
Lens is standard on all trims. Please consult factory for additional lens options.
Available in lensed adjustable downlight or lensed adjustable wallwash.
TRIM- LESS:
Die-Cast perforated meshcover intended for installation in drywall or plaster
ceilings. Mudding maybe applied right up to the edge of the fixture opening to
provide seamless appearance. Trim-Less accessory is secured to the housing
to prevent fractures in the ceiling and or drywall during and after installation.
AIMING:
Fusion ES3’s proprietary hot aiming system allows the lamp to be positioned
at the perfect setting to ensure the proper position of the beam of light before
trim is installed. Lamp holder is designed to ensure that the center beam of the
light bulb emerges out of fixture at any angled position from 0° to 45°. The lamp
holder contains degree markings, rotates 359° horizontally and 45° vertically
with a screw driver. The lamp holder is lockable at both the vertical and the
horizontal plane. The integrity of the design and lamp positioned are kept during
relamping or servicing the fixture.
ELECTRICAL/ TRANSFORMER:
Junction box and transformer maybe accessed from below the ceiling and above
the ceiling. Junction Box is Listed for through branch circuit wiring,12 AWG
90º C supply Conductors, and has four 1/2” KOs, one 3/4” KO and four Romex
knockouts with true pry-out slots and strain clamps. Transformer supplied is
thermally protected Class II dimming electronic transformer enhanced in heat
dissipating cover attached to junction box cover. De-rated lamp wattage labeling
is available please consult factory.
LAMPS:
GU5.3 Base. Unitized optics solid steel lamp holder grips lamp into place
securely and assures proper lamp to housing alignment. Integral reflector allows
for maximum heat dissipation, cool operation, and extends the life of the lamp.
LED lamps provided with PHILIPS or GE LED MR16.
MOUNTING:
Preinstalled bar hangers allow housing to be positioned and locked at any point
within a 24” joist span. They can be positioned on either the long or short axis of
the housing and can be shortened for 12” joists. They contain a double-headed
real nail for secure attachment into the joist. Bar hanger nails are installed on
a 20º downward angle for better contact, and the 90º pivoting mounting plate
makes installation fast and accurate. Bar hangers can fit onto T-Bar spline with
additional slots and holes for special mounting methods if necessary. Butterfly
brackets are also provided and are constructed from 18-gauge steel and can
be adjusted vertically. Butterfly brackets may be installed with 3/4” or 1-1/2”
lathing channel, 1/2” EMT, or optional C-Channel mounting bars are available.
LABELS:
c-UL-us listed for damp location.
c-UL-us listed for feed Through Wiring.
c-UL-us listed for direct contact with insulation.
WARRANTY:
Fusion ES Recessed luminaries are covered by Fusion’s one year limited
warranty. As a system, we stand behind our entire products from housing to
bar hangers.
WWW.IUSEFUSION.COM • TEL 1-877-375-5555 • FAX 1-877-375-3333
FUSION ES3 IC SERIES LED/LV DOWNLIGHT
LOW VOLTAGE MR16 ES3 SQUARE APERTURE RECESSED
3”
3”
7”
7”
16”
10”
3”
4”
4”
5-3/8”
ES3
1302 - Lensed downlight
1307 - Lensed wall wash
Trimless
ORDERING INFORMATION
E S 3
Example: ES3-F-LV-IC-50W-MR16-E-120-BP31-EFS-1302-W-WH-BP-ES3-MR16-CL
LUMINAIRE SELECTION
IC
HOUSING TYPE
FLANGE OPTION
LIGHT SOURCE
ES3
F - (Flanged)
T - (Trimless)
LV - Low voltage
LED - LED lamp
WATTAGE
BALLAST
20W-MR16
37W-MR16
42W-MR16
50W-MR16
E - (Electronic)
VOLTAGE
120V
277V
ACCESSORIES/OPTIONS
OPTIONS
blank - Standard bar
hangers (included)
BP31 - 27” C-channel
bar hangers
RIF - RIF filter
10W-LED
TRIM FLANGE OPTION
TRIM
TRIM COLOR
1302 - Lensed downlight
1307 - Lensed wall wash
W-WH - White
SI-SI - Silver
TRIM ACCESSORIES
BP-ES3-MR16-CL - Clear Lens
BP-ES3-MR16-LI - Linear spread Lens
BP-ES3-MR16-SP - Spread/Prismatic Lens
BP-ES3-MR16-SO - Solite Lens
BP-ES3-MR16-UV - Anti UV/Ultraviolet Lens
LED MR16, 12VAC, 8-10W
Equivalent to 40-50W Halogen
is available, compatible with this fixtures.
Due to the changes of constant improvement in lighting technology, all details are subject to change without notice.
Consult factory for up to date information.
S E R I E S
EFS - Flanged trim
ETS - Trimless
V O LTAG E
TRIM OPTION SELECTION
LO W
IC - New
construction
insulated ceiling
/
SERIES
E
L E D
LV
I C
ES3
F U S I O N
ES3-T-Housing
ES3-F-Housing
FLOOD (36º)
NARROW FLOOD (25º)
SPOT (20º)
VERY SPOT (10º)
447
FUSION ES3 NON-IC LED/LV SERIES
LED/LOW VOLTAGE MR16 ES3 SQUARE APERTURE RECESSED
Rotates:
Horizontally
359º
Vertically 45º
Lockable
ADJUSTABILITY
Lamp holder is designed to ensure the center
beam of the light bulb emerges out of fixture at
any angled position from 0º to 359° horizontally
and 0º to 45° vertically with a screw driver.
DESCRIPTION:
The 3 inch Square Recessed directional, accent, and downlight fully adjustable luminaire, is ideal for retail, hospitality, commercial, and high-end residential
applications. Designed around a low voltage MR16 tungsten-halogen lamp is available with different shielding options to maximize performance, and help accomplish
desired lighting environments.
ES3
F U S I O N
HOUSING:
Thermally protected, specification grade adjustable recessed housing. For
new construction non-insulated ceilings or where insulation can be kept 3”
from housing. High temperature matt black painted 22 gauge cold rolled steel
construction for maximum heat dissipation, rust protection and glare free
illumination.
E S 3
N O N - I C
COLLAR BRACKET:
Adjusts vertically and can accommodate any ceiling from ½” up to 1” thickness.
Please consult factory for custom or thicker ceiling applications. Integral laser
beam slots allow the use of guide strings or leveling laser guns to ensure that all
luminaries are installed in an level and straight plane. Collar can be rotated up to
45° once the housing is installed in the ceiling (prior to having drywall installed).
L E D
TRIM OPTION:
Post painted powder coated Die-Cast trim ring available in white. Please consult
factory for custom paint color options. Collar and trim rotate jointly. Solite
Frosted Lens is standard on all trims. Please consult factory for additional lens
options. Available in lensed adjustable downlight or lensed adjustable wallwash.
/
LO W
V O LTAG E
S E R I E S
448
TRIM- LESS:
Die-Cast perforated meshcover intended for installation in drywall or plaster
ceilings. Mudding maybe applied right up to the edge of the fixture opening to
provide seamless appearance. Trim-Less accessory is secured to the housing
to prevent fractures in the ceiling and or drywall during and after installation.
AIMING:
Fusion ES3’s proprietary hot aiming system allows the lamp to be positioned
at the perfect setting to ensure the proper position of the beam of light before
trim is installed. Lamp holder is designed to ensure that the center beam of the
light bulb emerges out of fixture at any angled position from 0° to 45°. The lamp
holder contains degree markings, rotates 359° horizontally and 45° vertically
with a screw driver. The lamp holder is lockable at both the vertical and the
horizontal plane. The integrity of the design and lamp positioned are kept during
relamping or servicing the fixture.
ELECTRICAL/ TRANSFORMER:
Junction box and transformer maybe accessed from below the ceiling and above
the ceiling. Junction Box is Listed for through branch circuit wiring,12 AWG
90º C supply Conductors, and has four 1/2” KOs, one 3/4” KO and four Romex
knockouts with true pry-out slots and strain clamps. Transformer supplied is
thermally protected Class II dimming electronic transformer enhanced in heat
dissipating cover attached to junction box cover. De-rated lamp wattage labeling
is available please consult factory.
LAMPS:
GU5.3 Base. Unitized optics solid steel lamp holder grips lamp into place
securely and assures proper lamp to housing alignment. Integral reflector allows
for maximum heat dissipation, cool operation, and extends the life of the lamp.
LED lamps provided with PHILIPS or GE LED MR16.
MOUNTING:
Preinstalled bar hangers allow housing to be positioned and locked at any point
within a 24” joist span. They can be positioned on either the long or short axis of
the housing and can be shortened for 12” joists. They contain a double-headed
real nail for secure attachment into the joist. Bar hanger nails are installed on
a 20º downward angle for better contact, and the 90º pivoting mounting plate
makes installation fast and accurate. Bar hangers can fit onto T-Bar spline with
additional slots and holes for special mounting methods if necessary. Butterfly
brackets are also provided and are constructed from 18-gauge steel and can
be adjusted vertically. Butterfly brackets may be installed with 3/4” or 1-1/2”
lathing channel, 1/2” EMT, or optional C-Channel mounting bars are available.
LABELS:
c-UL-us listed for Damp location.
c-UL-us listed for feed Through Wiring.
WARRANTY:
Fusion ES Recessed luminaries are covered by Fusion’s one year limited
warranty. As a system, we stand behind our entire products from housing to
bar hangers.
WWW.IUSEFUSION.COM • TEL 1-877-375-5555 • FAX 1-877-375-3333
FUSION ES3 NON-IC LED/LV SERIES
LED/LOW VOLTAGE MR16 ES3 SQUARE APERTURE RECESSED
3”
3”
7”
7”
16”
10”
3”
4”
4”
5-3/8”
ES3
1302 - Lensed downlight
1307 - Lensed wall wash
Trimless
E S 3
ORDERING INFORMATION
Example: ES3-F-LV-N-50W-MR16-E-120-BP31-EFS-1302-W-WH-BP-ES3-MR16-CL
LV
N
E
HOUSING TYPE
WATTAGE
BALLAST
ES3
F - (Flanged)
T - (Trimless)
LV - Low voltage
N - New
construction for
non insulated
ceiling
20W-MR16
37W-MR16
42W-MR16
50W-MR16
71W-MR16
10W-LED
E - (Electronic)
LED - LED Lamp
ACCESSORIES
OPTIONS
blank - Standard bar
hangers (included)
BP31 - 27” C-channel
bar hangers
RIF - RIF filter
VOLTAGE
120V
277V
LO W
LIGHT SOURCE
TRIM OPTION SELECTION
TRIM
TRIM COLOR
1302 - Lensed downlight
1307 - Lensed wall wash
W-WH - White
SI-SI - Silver
TRIM ACCESSORIES
LED MR16, 12VAC, 8-10W
Equivalent to 40-50W Halogen
is available, compatible with this fixtures.
Due to the changes of constant improvement in lighting technology, all details are subject to change without notice.
Consult factory for up to date information.
FLOOD (36º)
NARROW FLOOD (25º)
SPOT (20º)
VERY SPOT (10º)
S E R I E S
BP-ES3-MR16-CL - Clear Lens
BP-ES3-MR16-LI - Linear spread Lens
BP-ES3-MR16-SP - Spread/Prismatic Lens
BP-ES3-MR16-SO - Solite Lens
BP-ES3-MR16-UV - Anti UV/Ultraviolet Lens
V O LTAG E
TRIM FLANGE OPTION
EFS - Flanged trim
ETS - Trimless
/
FLANGE OPTION
L E D
SERIES
N O N - I C
LUMINAIRE SELECTION
ES3
F U S I O N
ES3-T-Housing
ES3-F-Housing
449
FUSION ES3 IC SERIES
MR16 GX10 CMH ES3 SQUARE APERTURE RECESSED
Rotates:
Horizontally
359º
Vertically 45º
Lockable
ADJUSTABILITY
Lamp holder is designed to ensure the center
beam of the light bulb emerges out of fixture at
any angled position from 0º to 359° horizontally
and 0º to 45° vertically with a screw driver.
DESCRIPTION:
The 3 inch Square Recessed directional, accent, and downlight fully adjustable luminaire, is ideal for retail, hospitality, commercial, and high-end residential
applications. Designed around a MR16 GX10 ceramic metal halide lamp is available with different shielding options to maximize performance, and help accomplish
desired lighting environments.
ES3
F U S I O N
E S 3
I C
M E T A L
H A L I D E
S E R I E S
450
HOUSING:
Thermally protected, specification grade adjustable recessed housing. For
new construction insulated ceilings where housing will be in direct contact
with insulation. Die-formed all aluminum construction matt black painted for
maximum heat dissipation, rust protection and glare free illumination.
COLLAR BRACKET:
Adjusts vertically and can accommodate any ceiling from ½” up to 1” thickness.
Please consult factory for custom or thicker ceiling applications. Integral laser
beam slots allow the use of guide strings or leveling laser guns to ensure that all
luminaries are installed in an level and straight plane. Collar can be rotated up to
45° once the housing is installed in the ceiling (prior to having drywall installed).
TRIM OPTION:
Post painted powder coated Die-Cast trim ring available in white. Please consult
factory for custom paint color options. Collar and trim rotate jointly. Solite
Frosted Lens is standard on all trims. Please consult factory for additional lens
options. Available in lensed adjustable downlight or lensed adjustable wallwash.
TRIM- LESS:
Die-Cast perforated meshcover intended for installation in drywall or plaster
ceilings. Mudding maybe applied right up to the edge of the fixture opening to
provide seamless appearance. Trim-Less accessory is secured to the housing
to prevent fractures in the ceiling and or drywall during and after installation.
AIMING:
Fusion ES3’s proprietary hot aiming system allows the lamp to be positioned
at the perfect setting to ensure the proper position of the beam of light before
trim is installed. Lamp holder is designed to ensure that the center beam of the
light bulb emerges out of fixture at any angled position from 0° to 45°. The lamp
holder contains degree markings, rotates 359° horizontally and 45° vertically
with a screw driver. The lamp holder is lockable at both the vertical and the
horizontal plane. The integrity of the design and lamp positioned are kept during
relamping or servicing the fixture.
ELECTRICAL/ TRANSFORMER:
Junction box and transformer maybe accessed from below the ceiling and
above the ceiling. Junction Box is Listed for through branch circuit wiring,12
AWG 90º C supply Conductors, and has four 1/2” KOs, one 3/4” KO and four
Romex knockouts with true pry-out slots and strain clamps. High Performance
and energy efficient power controlled electronic ceramic metal halide ballasts
attached to junction box. De-rated lamp wattage labeling is available please
consult factory.
LAMPS:
MR16 GX10 ceramic metal halide lamp. Unitized optics solid steel lamp holder
grips lamp into place securely and assures proper lamp to housing alignment.
Integral reflector allows for maximum heat dissipation, cool operation, and
extends the life of the lamp.
MOUNTING:
Preinstalled bar hangers allow housing to be positioned and locked at any point
within a 24” joist span. They can be positioned on either the long or short axis of
the housing and can be shortened for 12” joists. They contain a double-headed
real nail for secure attachment into the joist. Bar hanger nails are installed on
a 20º downward angle for better contact, and the 90º pivoting mounting plate
makes installation fast and accurate. Bar hangers can fit onto T-Bar spline with
additional slots and holes for special mounting methods if necessary. Butterfly
brackets are also provided and are constructed from 18-gauge steel and can
be adjusted vertically. Butterfly brackets may be installed with 3/4” or 1-1/2”
lathing channel, 1/2” EMT, or optional C-Channel mounting bars are available.
LABELS:
c-UL-us listed for Damp location.
c-UL-us listed for feed Through Wiring.
c-UL-us listed for direct contact with insulation.
WARRANTY:
Fusion ES Recessed luminaries are covered by Fusion’s one year limited
warranty. As a system, we stand behind our entire products from housing to
bar hangers.
WWW.IUSEFUSION.COM • TEL 1-877-375-5555 • FAX 1-877-375-3333
FUSION ES3 IC SERIES
MR16 GX10 CMH ES3 SQUARE APERTURE RECESSED
3”
3”
7”
7”
16”
10”
3”
4”
4”
5-3/8”
ES3
1302 - Lensed downlight
1307 - Lensed wall wash
Trimless
F U S I O N
ES3-T-Housing
ES3-F-Housing
E S 3
I C
ORDERING INFORMATION
Example: ES3-F-CMH-IC-20W-MR16-E-120-BP31-EFS-1302-W-WH-BP-ES3-MR16-CL
M E T A L
LUMINAIRE SELECTION
ES3
CMH
FLANGE OPTION
F - (Flanged)
T - (Trimless)
LIGHT SOURCE
HOUSING TYPE
CMH - GX10
Ceramic metal
halide
IC - New
construction
insulated ceiling
WATTAGE
20W-MR16
E
BALLAST
VOLTAGE
E - (Electronic)
120V
277V
TRIM OPTION SELECTION
TRIM
1302 - Lensed downlight
1307 - Lensed wall wash
TRIM COLOR
W-WH - White
SI-SI - Silver
TRIM ACCESSORIES
BP-ES3-MR16-CL - Clear
BP-ES3-MR16-LI - Linear spread
BP-ES3-MR16-SP - Spread/Prismatic
BP-ES3-MR16-SO - Solite
BP-ES3-MR16-UV - Anti UV/Ultraviolet
Due to the changes of constant improvement in lighting technology, all details are subject to change without notice.
Consult factory for up to date information.
S E R I E S
TRIM FLANGE OPTION
EFS - Flange trim
ETS - Trimless
ACCESSORIES
blank - Standard bar
hangers included
BP31 - 27” C-channel
bar hangers
H A L I D E
SERIES
ES3
20W-MR16
IC
451
FUSION ES3 NON-IC SERIES
MR16 GX10 CMH ES3 SQUARE APERTURE RECESSED
Rotates:
Horizontally
359º
Vertically 45º
Lockable
ADJUSTABILITY
Lamp holder is designed to ensure the center
beam of the light bulb emerges out of fixture at
any angled position from 0º to 359° horizontally
and 0º to 45° vertically with a screw driver.
DESCRIPTION:
The 3 inch Square Recessed directional, accent, and downlight fully adjustable luminaire, is ideal for retail, hospitality, commercial, and high-end residential
applications. Designed around a MR16 GX10 ceramic metal halide lamp is available with different shielding options to maximize performance, and help accomplish
desired lighting environments.
ES3
F U S I O N
E S 3
N O N - I C
M E T A L
H A L I D E
S E R I E S
452
HOUSING:
Thermally protected, specification grade adjustable recessed housing. For
new construction non-insulated ceilings or where insulation can be kept 3”
from housing. High temperature matt black painted 22 gauge cold rolled steel
construction for maximum heat dissipation, rust protection and glare free
illumination.
COLLAR BRACKET:
Adjusts vertically and can accommodate any ceiling from ½” up to 1” thickness.
Please consult factory for custom or thicker ceiling applications. Integral laser
beam slots allow the use of guide strings or leveling laser guns to ensure that all
luminaries are installed in an level and straight plane. Collar can be rotated up to
45° once the housing is installed in the ceiling (prior to having drywall installed).
TRIM OPTION:
Post painted powder coated Die-Cast trim ring available in white. Please consult
factory for custom paint color options. Collar and trim rotate jointly. Solite
Frosted Lens is standard on all trims. Please consult factory for additional lens
options. Available in lensed adjustable downlight or lensed adjustable wallwash.
TRIM- LESS:
Die-Cast perforated meshcover intended for installation in drywall or plaster
ceilings. Mudding maybe applied right up to the edge of the fixture opening to
provide seamless appearance. Trim-Less accessory is secured to the housing
to prevent fractures in the ceiling and or drywall during and after installation.
AIMING:
Fusion ES3’s proprietary hot aiming system allows the lamp to be positioned
at the perfect setting to ensure the proper position of the beam of light before
trim is installed. Lamp holder is designed to ensure that the center beam of the
light bulb emerges out of fixture at any angled position from 0° to 45°. The lamp
holder contains degree markings, rotates 359° horizontally and 45° vertically
with a screw driver. The lamp holder is lockable at both the vertical and the
horizontal plane. The integrity of the design and lamp positioned are kept during
relamping or servicing the fixture.
ELECTRICAL/ TRANSFORMER:
Junction box and transformer maybe accessed from below the ceiling and
above the ceiling. Junction Box is Listed for through branch circuit wiring,12
AWG 90º C supply Conductors, and has four 1/2” KOs, one 3/4” KO and four
Romex knockouts with true pry-out slots and strain clamps. High Performance
and energy efficient power controlled electronic ceramic metal halide ballasts
attached to junction box. De-rated lamp wattage labeling is available please
consult factory.
LAMPS:
MR16 GX10 ceramic metal halide lamp. Unitized optics solid steel lamp holder
grips lamp into place securely and assures proper lamp to housing alignment.
Integral reflector allows for maximum heat dissipation, cool operation, and
extends the life of the lamp.
MOUNTING:
Preinstalled bar hangers allow housing to be positioned and locked at any point
within a 24” joist span. They can be positioned on either the long or short axis of
the housing and can be shortened for 12” joists. They contain a double-headed
real nail for secure attachment into the joist. Bar hanger nails are installed on
a 20º downward angle for better contact, and the 90º pivoting mounting plate
makes installation fast and accurate. Bar hangers can fit onto T-Bar spline with
additional slots and holes for special mounting methods if necessary. Butterfly
brackets are also provided and are constructed from 18-gauge steel and can
be adjusted vertically. Butterfly brackets may be installed with 3/4” or 1-1/2”
lathing channel, 1/2” EMT, or optional C-Channel mounting bars are available.
LABELS:
c-UL-us listed for Damp location.
c-UL-us listed for feed Through Wiring.
WARRANTY:
Fusion ES Recessed luminaries are covered by Fusion’s one year limited
warranty. As a system, we stand behind our entire products from housing to
bar hangers.
WWW.IUSEFUSION.COM • TEL 1-877-375-5555 • FAX 1-877-375-3333
FUSION ES3 NON-IC SERIES
MR16 GX10 CMH ES3 SQUARE APERTURE RECESSED
3”
3”
7”
7”
16”
10”
3”
4”
4”
5-3/8”
ES3
1302 - Lensed downlight
1307 - Lensed wall wash
Trimless
F U S I O N
ES3-T-Housing
ES3-F-Housing
E S 3
N O N - I C
ORDERING INFORMATION
Example: ES3-F-CMH-N-20W-MR16-E-120-BP31-EFS-1302-W-WH-BP-ES3-MR16-CL
LUMINAIRE SELECTION
CMH
SERIES
ES3
FLANGE OPTION
F - (Flanged)
T - (Trimless)
LIGHT SOURCE
E
HOUSING TYPE
WATTAGE
N - New
construction for
non insulated
ceiling
20W-MR16
39W-MR16
BALLAST
E - (Electronic)
TRIM OPTION SELECTION
TRIM
1302 - Lensed downlight
1307 - Lensed wall wash
TRIM COLOR
W-WH - White
SI-SI - Silver
TRIM ACCESSORIES
BP-ES3-MR16-CL - Clear
BP-ES3-MR16-LI - Linear spread
BP-ES3-MR16-SP - Spread/Prismatic
BP-ES3-MR16-SO - Solite
BP-ES3-MR16-UV - Anti UV/Ultraviolet
Due to the changes of constant improvement in lighting technology, all details are subject to change without notice.
Consult factory for up to date information.
120V
277V
ACCESSORIES
blank - Standard bar
hangers included
BP31 - 27” C-channel
bar hangers
S E R I E S
TRIM FLANGE OPTION
EFS - Flange trim
ETS - Trimless
VOLTAGE
H A L I D E
CMH - GX10
Ceramic metal
halide
N
M E T A L
ES3
453
FUSION FC LED SERIES
MULTI LAMP ADJUSTABLE RECESSED WITH INFUSION™ GE LED MODULE
2000
PER HEAD
ADJUSTABILITY FUNCTION
The Fusion fixture tilt 45º and
rotate 90º for making setting
consistent simple and effort-less.
DESCRIPTION:
GE InfusionTM LED Module System operating system delivers 1000, 1500 and 2000 lumens per head with 90+ CRI and consistent white light within 2 MacAdams ellipses. Also
available in three standard color options 2700K, 3000K, and 4000K. Guaranteed lumen maintenance of 70% at 50,000hours and tested to LM-79 and LM-80 standards by an
independent laboratory.
HOUSING:
Thermally protected, specification grade multi-lamp recessed luminaire. It is designed
for new construction non-insulated ceilings or where insulation can be kept 3” from
housing. It is available in 1, 2, 3 and 4 lamp linear, and 3 lamp corner or 4 lamp
square configuration. It is fabricated in 18 gauge steel and post painted. The housing
is vented for maximum heat dissipation and cool operation.
FC
High color rendering up to 90CRI, color stabilization within 2 MacAdam ellipses,
three ideal color temperature options, tool free upgrading, and an industry best
variety of beam angle options from 10º to 60º for different applications.
TRIM OPTION:
Post painted powder coated Die-Cast trim ring is available in white. Please consult
factory for custom paint color options.
GE INFUSIONTM
LED MODULE
TRIM- LESS:
All steel perforated meshcover intended for installation in drywall or plaster ceilings.
Mudding may be applied right up to the edge of the fixture opening to provide
seamless appearance.
AIMING:
Fusion FC multi-lamp luminaries are have full adjustable aiming capability which
allows the double gimbal mechanism to rotate 359º and pivot 90º and lock in place
at the desired position.
F U S I O N
F C
ELECTRICAL/ DRIVER:
Junction box and transformer may be accessed from below the ceiling.
Junction Box is Listed for through branch circuit wiring,12 AWG 90º C supply
Conductors, and has four 1/2” KOs, one 3/4” KO and four Romex knockouts
with true pry-out slots and strain clamps. Driver supplied is thermally protected
Class II dimming electronic driver enhanced in heat dissipating cover attached
to junction box cover. De-rated lamp wattage labeling is available, please
consult factory.
L E D
MOUNTING:
Is constructed from 18-gauge steel and can be adjusted vertically. May be installed
with 3/4” or 1-1/2” lathing channel, 1/2” EMT, or optional C-Channel mounting bars
are available.
S E R I E S
LAMPS:
1500L
2000L
DIMMING:
DIM10 (0-10V Dimming)
LUTH (Lutron Dimming)
ACCESSORIES:
The perfect lighting ambience may be accomplished by utilizing the optical accessories
available for Fusion FC multi-lamp luminaries.
LABELS:
c-UL-us listed for Damp location.
c-UL-us listed for feed Through Wiring.
WARRANTY:
Fusion FC multi-lamp luminaries are covered by Fusion’s one year limited warranty.
As a system, we stand behind our entire products from housing to bar hangers.
The GE InfusionTM LED Module System offers a wide array of features including;
ORDERING INFORMATION
Example: FC3-LED-N-1000L-DIM10-120-30K-90-FL-F-WH-BK
FC3-LED
SERIES
FC1-LED
FC2-LED
FC3-LED
FC4-LED
FCL-LED
FCX-LED
454
1000L
N
TYPE
LUMENS
N - (New
1000L - 17W
Construction) 1500L - 26W
2000L - 32W
DIMMING-VOLTAGE
DIM10-120
DIM10-277
LUTH-120
LUTH-277
COLOR
CRI
27K
30K
40K
80+ NS -
90+ FL - WFL - VWFL -
OPTICS
FLANGE OPTION
10º-12º F - (Flanged)
20º-30º T - (Trimless)
30º-40º
50º-60º
WH
BK
TRIM
INTERIOR COLOR
ACCESSORIES
WH - (White)
BK - (Black)
BP31 -27” C-channel
bar hangers
hrs
50,000
RATED LIFE
WWW.IUSEFUSION.COM • TEL 1-877-375-5555 • FAX 1-877-375-3333
FUSION FC LED SERIES
MULTI LAMP ADJUSTABLE RECESSED WITH INFUSION™ GE LED MODULE
DIMENSION
A
A = 13-1/2”
B = 8-1/2”
C* = 12”
D = 17”
E = 8-1/2”
F = 7-1/2”
G = 6-1/2”
H = 5-5/8”
C
H F
B
G
E
D
A
DIMENSION
A = 19-3/8”
B = 8-1/2”
C* = 12”
D = 22-7/8”
E = 14-3/8”
F = 7-1/2”
G = 12-3/8”
H = 5-5/8”
C
G
E
D
C
H F
B
G
E
D
FC
FC3-LED-N
A
C
H F
B
FC4-LED-N
A
F C
C
F U S I O N
G
E
D
DIMENSION
G
D
FCL-LED-N
A
S E R I E S
E
L E D
H F
B
DIMENSION
A = 19-1/4”
B = 14-3/4”
C* = 12”
D = 22-3/4”
E = 14-3/8”
F = 13-5/8”
G = 12-3/8”
H = 11-5/8”
FC2-LED-N
A
DIMENSION
A = 18-1/2”
B = 15-3/4”
C* = 12”
D = 22”
E = 14”
F = 14”
G = 12”
H = 12”
H F
B
DIMENSION
A = 25-1/4”
B = 8-1/2”
C* = 12”
D = 28-3/4”
E = 20-1/4”
F = 7-1/2”
G = 18-1/4”
H = 5-5/8”
A = 31-1/8”
B = 8-1/2”
C* = 12”
D = 34-5/8”
E = 26-1/4”
F = 7-1/2”
G = 24-1/4”
H = 5-5/8”
FC1-LED-N
C
H F
B
E
G
D
FCX-LED-N
* Up to 2 inches may need to be added to the height of the fixtures based on the required ballast or transformer.
Due to the changes of constant improvement in lighting technology, all details are subject to change without notice.
Consult factory for up to date information.
455
FUSION FC LED SERIES
LED MR16 MULTI LAMP ADJUSTABLE RECESSED
390
PER HEAD
ADJUSTABILITY FUNCTION
The Fusion fixture tilt 45º and
rotate 90º for making setting
consistent simple and effort-less.
DESCRIPTION:
Developed especially for LED MR16 lamp applications. Crafted for sustainability and environmentally sensitive applications. Five times the life expectancy of halogen
MR16 with 80% energy savings. Small aperture LED MR16 dedicated.
HOUSING:
Thermally protected, specification grade multi-lamp recessed luminaire. It is designed
for new construction non-insulated ceilings or where insulation can be kept 3” from
housing. It is available in 1, 2, 3 and 4 lamp linear, and 3 lamp corner or 4 lamp
square configuration. It is fabricated in 18 gauge steel and post painted. The housing
is vented for maximum heat dissipation and cool operation.
FC
LAMPS:
GU5.3 Base. Each MR16 lamp holder can individually be removed and lamped from
the front. Each lamp holder may be locked in position separately. Snoot is standards
on all lamp holders. Each lamp holder can take up to two optical accessories.
LED lamps provided with GE LED MR16.
TRIM OPTION:
Post painted powder coated Die-Cast trim ring is available in white. Please consult
factory for custom paint color options.
TRIM- LESS:
All steel perforated meshcover intended for installation in drywall or plaster ceilings.
Mudding may be applied right up to the edge of the fixture opening to provide
seamless appearance.
F U S I O N
F C
M R 1 6
L E D
S E R I E S
456
AIMING:
Fusion FC multi-lamp luminaries are have full adjustable aiming capability which
allows the double gimbal mechanism to rotate 359º and pivot 90º and lock in place
at the desired position.
ELECTRICAL/ DRIVER:
Junction box and transformer may be accessed from below the ceiling.
Junction Box is Listed for through branch circuit wiring,12 AWG 90º C supply
Conductors, and has four 1/2” KOs, one 3/4” KO and four Romex knockouts
with true pry-out slots and strain clamps. Driver supplied is thermally protected
Class II dimming electronic driver enhanced in heat dissipating cover attached
to junction box cover. De-rated lamp wattage labeling is available, please
consult factory.
MOUNTING:
Is constructed from 18-gauge steel and can be adjusted vertically. May be installed
with 3/4” or 1-1/2” lathing channel, 1/2” EMT, or optional C-Channel mounting bars
are available.
INPUT VOLT.
INPUT FREQ.
WATT
CRI
COLOR TEMP.
LUMENS
120
50/60Hz
7W
80.0
2700ºK/3000ºK
390
ACCESSORIES:
The perfect lighting ambience may be accomplished by utilizing the optical accessories
available for Fusion FC multi-lamp luminaries.
LABELS:
c-UL-us listed for Damp location.
c-UL-us listed for feed Through Wiring.
WARRANTY:
Fusion FC multi-lamp luminaries are covered by Fusion’s one year limited warranty.
As a system, we stand behind our entire products from housing to bar hangers.
ORDERING INFORMATION
Example: FC3-MR16LED-N-E-120-F-WH-BK
FC3
N
E
SERIES
TYPE
DRIVER
VOLTAGE
FC1-MR16LED N - (New
E - (Electronic) 120V
FC2-MR16LED Construction)
277V
FC3-MR16LED
FC4-MR16LED
FCL-MR16LED
FCX-MR16LED
WH
BK
FLANGE OPTION
TRIM
INTERIOR COLOR
GE 7W LED MR16 LAMP
F - (Flanged)
T - (Trimless)
WH - (White)
BK - (Black)
3000ºK
LED7DMR16/830/15
LED7DMR16/830/25
LED7DMR16/830/35
LED7DMR16/NFL/TP
2700ºK
LED7DMR16/827/15
LED7DMR16/827/25
LED7DMR16/827/35
hrs
50,000
RATED LIFE
ACCESSORIES
BP8MR16-FR
BP8MR16-SP
BP8MR16-SF
BP8MR16-HC
BP8MR16-LI
BP8MR16-SO
BP8MR16-CL
BP8MR16-UV
OPTIONS
- Frosted RIF - RIF filter
- Spread
- Soft focus
- Honey comb
- Linear
- Solite
- Clear
- Ultraviolet
* COLOR FILTERS ALSO AVAILABLE
WWW.IUSEFUSION.COM • TEL 1-877-375-5555 • FAX 1-877-375-3333
FUSION FC LED SERIES
LED MR16 MULTI LAMP ADJUSTABLE RECESSED
DIMENSION
A
A = 11-1/2”
B = 6-1/2”
C = 6-1/2”
D = 16” - 18-3/8”
E = 6-1/2”
F = 5-5/8”
G = 6-1/4”
H = 4-3/8”
C
H F
B
G
E
D
A
DIMENSION
A = 15-1/2”
B = 6-1/2”
C = 6-1/2”
D = 19-3/4 - 22-1/4”
E = 10-1/2”
F = 5-5/8”
G = 10-1/4”
H = 4-3/8”
C
H F
B
G
E
D
A = 19-3/8”
B = 6-1/2”
C = 6-1/2”
D = 23-5/8 - 26”
E = 14-1/2”
F = 5-5/8”
G = 14-1/4”
H = 4-3/8”
C
H F
B
G
E
D
C
H F
G
E
D
FC4-MR16LED
A
F U S I O N
B
F C
DIMENSION
M R 1 6
C
H F
B
G
D
FCL-MR16LED
L E D
E
S E R I E S
A
DIMENSION
A = 15-3/8”
B = 10-3/4”
C = 6-1/2”
D = 20” - 23-1/4”
E = 10-5/8”
F = 9-5/8”
G = 10-1/4”
H = 8-1/2”
FC
FC3-MR16LED
A
DIMENSION
A = 14-1/2”
B = 11-3/4”
C = 6-1/2”
D = 18-1/2” - 21”
E = 10-1/8”
F = 10-1/8”
G = 9-7/8”
H = 9-7/8”
FC2-MR16LED
A
DIMENSION
A = 23-1/4”
B = 6-1/2”
C = 6-1/2”
D = 27-5/8” - 30”
E = 18-3/8”
F = 5-5/8”
G = 18-1/8”
H = 4-3/8”
FC1-MR16LED
C
H F
B
E
G
D
FCX-MR16LED
* Up to 2 inches may need to be added to the height of the fixtures based on the required ballast or transformer.
Due to the changes of constant improvement in lighting technology, all details are subject to change without notice.
Consult factory for up to date information.
457
FUSION FC LOW VOLTAGE SERIES
MR16 MULTI LAMP ADJUSTABLE RECESSED
ADJUSTABILITY FUNCTION
The Fusion fixture tilt 45º and
rotate 90º for making setting
consistent simple and effort-less.
DESCRIPTION:
Fusion FC multi-lamp luminaries are ideal for downlighting, accenting or a combination of both in any retail, hospitality, lobby, residential or commercial space. It’s
unique double gimbal mechanisms locks in position to assure the perfect ambiance and design at all times.
HOUSING:
Thermally protected, specification grade multi-lamp recessed luminaire. It is
designed for new construction non-insulated ceilings or where insulation can
be kept 3” from housing. It is available in 1, 2, 3 and 4 lamp linear, and 3 lamp
corner or 4 lamp square configuration. It is fabricated in 18 gauge steel and post
painted. The housing is vented for maximum heat dissipation and cool operation.
FC
TRIM OPTION:
Post painted powder coated Die-Cast trim ring is available in white. Please
consult factory for custom paint color options.
TRIM- LESS:
All steel perforated meshcover intended for installation in drywall or plaster
ceilings. Mudding may be applied right up to the edge of the fixture opening to
provide seamless appearance.
F U S I O N
AIMING:
Fusion FC multi-lamp luminaries are have full adjustable aiming capability
which allows the double gimbal mechanism to rotate 359º and pivot 90º and
lock in place at the desired position.
F C
L O W
ELECTRICAL/ TRANSFORMER:
Junction box and transformer may be accessed from below the ceiling. Junction
Box is Listed for through branch circuit wiring,12 AWG 90º C supply Conductors,
and has four 1/2” KOs, one 3/4” KO and four Romex knockouts with true pryout slots and strain clamps. Transformer supplied is thermally protected Class
II dimming electronic transformer enhanced in heat dissipating cover attached
to junction box cover. De-rated lamp wattage labeling is available, please
consult factory.
LAMPS:
GU5.3 Base. Each MR16 lamp holder can individually be removed and lamped
from the front. Each lamp holder may be locked in position separately. Snoot
is standards on all lamp holders. Each lamp holder can take up to two optical
accessories.
MOUNTING:
Is constructed from 18-gauge steel and can be adjusted vertically. May be
installed with 3/4” or 1-1/2” lathing channel, 1/2” EMT, or optional C-Channel
mounting bars are available.
ACCESSORIES:
The perfect lighting ambience may be accomplished by utilizing the optical
accessories available for Fusion FC multi-lamp luminaries.
LABELS:
c-UL-us listed for Damp location.
c-UL-us listed for feed Through Wiring.
WARRANTY:
Fusion FC multi-lamp luminaries are covered by Fusion’s one year limited
warranty. As a system, we stand behind our entire products from housing to
bar hangers.
ORDERING INFORMATION
V O L T A G E
Example: FC3-LV-N-50W-MR16-E-120-F-WH-BK
N
E
BK
INTERIOR COLOR
S E R I E S
SERIES
TYPE
WATTAGE
BALLAST
VOLTAGE
FLANGE OPTION
TRIM
FC1-LV
FC2-LV
FC3-LV
FC4-LV
FCL-LV
FCX-LV
N - (New
Construction)
20W-MR16
37W-MR16
42W-MR16
50W-MR16
71W-MR16
E - (Electronic)
120V
277V
F - (Flanged)
T - (Trimless)
WH - (White)
ACCESSORIES
OPTIONS
BP8MR16-FR-Frosted RIF - RIF filter
BP8MR16-SP-Spread
BP8MR16-SF-Soft focus
BP8MR16-HC-Honey comb
BP8MR16-LI-Linear
BP8MR16-SO-Solite
BP8MR16-CL-Clear
* COLOR FILTERS ALSO AVAILABLE BP8MR16-UV-Ultraviolet
LED MR16, 12VAC, 8-10W
Equivalent to 40-50W Halogen
is available, compatible with this fixtures.
458
WH
BK - (Black)
FLOOD (36º)
NARROW FLOOD (25º)
SPOT (20º)
VERY SPOT (10º)
WWW.IUSEFUSION.COM • TEL 1-877-375-5555 • FAX 1-877-375-3333
FUSION FC LOW VOLTAGE SERIES
MR16 MULTI LAMP ADJUSTABLE RECESSED
DIMENSION
A
A = 11-1/2”
B = 6-1/2”
C = 6-1/2”
D = 16” - 18-3/8”
E = 6-1/2”
F = 5-5/8”
G = 4-3/8”
H = 3-1/2”
C
H F
B
G
E
D
A
DIMENSION
A = 15-1/2”
B = 6-1/2”
C = 6-1/2”
D = 19-3/4 - 22-1/4”
E = 10-1/2”
F = 5-5/8”
G = 8-3/4”
H = 3-1/2”
C
H F
B
G
E
D
A = 19-3/8”
B = 6-1/2”
C = 6-1/2”
D = 23-5/8 - 26”
E = 14-1/2”
F = 5-5/8”
G = 13-1/4”
H = 3-1/2”
C
H F
B
G
E
D
C
FC
G
E
D
FC4-LV-N
F U S I O N
H F
B
F C
A
DIMENSION
L O W
C
H F
E
G
D
FCL-LV-N
A
S E R I E S
C
H F
B
E
V O L T A G E
B
DIMENSION
A = 15-3/8”
B = 10-3/4”
C = 6-1/2”
D = 20” - 23-1/4”
E = 10-5/8”
F = 9-5/8”
G = 8-3/4”
H = 8-3/4”
FC3-LV-N
A
DIMENSION
A = 14-1/2”
B = 11-3/4”
C = 6-1/2”
D = 18-1/2” - 21”
E = 10-1/8”
F = 10-1/8”
G = 8-3/4”
H = 8-3/4”
FC2-LV-N
A
DIMENSION
A = 23-1/4”
B = 6-1/2”
C = 6-1/2”
D = 27-5/8” - 30”
E = 18-3/8”
F = 5-5/8”
G = 17-1/4”
H = 3-1/2”
FC1-LV-N
G
D
FCX-LV-N
* Up to 2 inches may need to be added to the height of the fixtures based on the required ballast or transformer.
Due to the changes of constant improvement in lighting technology, all details are subject to change without notice.
Consult factory for up to date information.
459
FUSION FC MR16 CMH NON-IC SERIES
MR16 METAL HALIDE MULTI LAMP ADJUSTABLE RECESSED
ADJUSTABILITY FUNCTION
The Fusion fixture tilt 45º and
rotate 90º for making setting
consistent simple and effort-less.
DESCRIPTION:
Fusion FC multi-lamp luminaries are ideal for downlighting, accenting or a combination of both in any retail, hospitality, lobby, residential or commercial space. It’s
unique double gimbal mechanisms locks in position to assure the perfect ambiance and design at all times.
HOUSING:
Thermally protected, specification grade multi-lamp recessed luminaire. It is
designed for new construction non-insulated ceilings or where insulation can
be kept 3” from housing. It is available in 1, 2, 3 and 4 lamp linear, and 3 lamp
corner or 4 lamp square configuration. It is fabricated in 18 gauge steel and post
painted. The housing is vented for maximum heat dissipation and cool operation.
FC
TRIM OPTION:
Post painted powder coated Die-Cast trim ring is available in white. Please
consult factory for custom paint color options.
TRIM- LESS:
All steel perforated meshcover intended for installation in drywall or plaster
ceilings. Mudding may be applied right up to the edge of the fixture opening to
provide seamless appearance.
F U S I O N
AIMING:
Fusion FC multi-lamp luminaries are have full adjustable aiming capability which
allows the double gimbal mechanism to rotate 359º and pivot 90º and lock in
place at the desired position.
F C
C M H
ELECTRICAL:
Junction box and transformer may be accessed from below the ceiling. Junction
Box is Listed for through branch circuit wiring,12 AWG 90º C supply Conductors,
and has four 1/2” KOs, one 3/4” KO and four Romex knockouts with true pryout slots and strain clamps. De-rated lamp wattage labeling is available, please
consult factory.
LAMPS:
Metal Halide MR16. Each lamp holder can individually be removed and lamped
from the front. Each lamp holder may be locked in position separately. Snoot
is standards on all lamp holders. Each lamp holder can take up to two optical
accessories.
MOUNTING:
Is constructed from 18-gauge steel and can be adjusted vertically. May be
installed with 3/4” or 1-1/2” lathing channel, 1/2” EMT, or optional C-Channel
mounting bars are available.
ACCESSORIES:
The perfect lighting ambience may be accomplished by utilizing the optical
accessories available for Fusion FC multi-lamp luminaries.
LABELS:
c-UL-us listed for Damp location.
c-UL-us listed for feed Through Wiring.
WARRANTY:
Fusion FC multi-lamp luminaries are covered by Fusion’s one year limited
warranty. As a system, we stand behind our entire products from housing to
bar hangers.
M R 1 6
ORDERING INFORMATION
S E R I E S
Example: FC3-CMH-MR16-N-39W-120-F-WH-BK
N
50W
120
SERIES
TYPE
WATTAGE
VOLTAGE
FC1-CMH-MR16
FC2-CMH-MR16
FC3-CMH-MR16
FC4-CMH-MR16
FCL-CMH-MR16
FCX-CMH-MR16
N - (New
Construction)
20W
39W
120V
WH
BK
FLANGE OPTION
TRIM
INTERIOR COLOR
F - (Flanged)
T - (Trimless)
WH - (White)
BK - (Black)
* COLOR FILTERS ALSO AVAILABLE
460
ACCESSORIES
BP8MR16-FR
BP8MR16-SP
BP8MR16-SF
BP8MR16-HC
BP8MR16-LI
BP8MR16-SO
BP8MR16-CL
BP8MR16-UV
- Frosted
- Spread
- Soft focus
- Honey comb
- Linear
- Solite
- Clear
- Ultraviolet
WWW.IUSEFUSION.COM • TEL 1-877-375-5555 • FAX 1-877-375-3333
FUSION CMH MR16 NON-IC SERIES
METAL HALIDE MR16 MULTI LAMP ADJUSTABLE RECESSED
DIMENSION
A
A = 11-1/2”
B = 6-1/2”
C = 6-1/2”
D = 16” - 18-3/8”
E = 6-1/2”
F = 5-5/8”
G = 4-3/8”
H = 3-1/2”
C
H F
B
G
E
D
A
DIMENSION
A = 15-1/2”
B = 6-1/2”
C = 6-1/2”
D = 19-3/4 - 22-1/4”
E = 10-1/2”
F = 5-5/8”
G = 8-3/4”
H = 3-1/2”
C
H F
B
G
E
D
A = 19-3/8”
B = 6-1/2”
C = 6-1/2”
D = 23-5/8 - 26”
E = 14-1/2”
F = 5-5/8”
G = 13-1/4”
H = 3-1/2”
C
H F
B
G
E
D
C
FC
H F
G
E
D
FC4-CMH-MR16
F C
A
C M H
C
H F
B
G
D
FCL-CMH-MR16
S E R I E S
A
DIMENSION
M R 1 6
E
F U S I O N
B
DIMENSION
A = 15-3/8”
B = 10-3/4”
C = 6-1/2”
D = 20” - 23-1/4”
E = 10-5/8”
F = 9-5/8”
G = 8-3/4”
H = 8-3/4”
FC3-CMH-MR16
A
DIMENSION
A = 14-1/2”
B = 11-3/4”
C = 6-1/2”
D = 18-1/2” - 21”
E = 10-1/8”
F = 10-1/8”
G = 8-3/4”
H = 8-3/4”
FC2-CMH-MR16
A
DIMENSION
A = 23-1/4”
B = 6-1/2”
C = 6-1/2”
D = 27-5/8” - 30”
E = 18-3/8”
F = 5-5/8”
G = 17-1/4”
H = 3-1/2”
FC1-CMH-MR16
C
H F
B
E
G
D
FCX-CMH-MR16
* Up to 2 inches may need to be added to the height of the fixtures based on the required ballast or transformer.
Due to the changes of constant improvement in lighting technology, all details are subject to change without notice.
Consult factory for up to date information.
461
FUSION FC HID SERIES
PAR30 CMH MULTI LAMP ADJUSTABLE RECESSED
ADJUSTABILITY FUNCTION
The Fusion fixture tilt 45º and
rotate 90º for making setting
consistent simple and effort-less.
DESCRIPTION:
Fusion FC multi-lamp luminaries are ideal for downlighting, accenting or a combination of both in any retail, hospitality, lobby, residential or commercial space. It’s
unique double gimbal mechanisms locks in position to assure the perfect ambiance and design at all times.
HOUSING:
Thermally protected, specification grade multi-lamp recessed luminaire. It is
designed for new construction non-insulated ceilings or where insulation can
be kept 3” from housing. It is available in 1, 2, 3 and 4 lamp linear, and 3 lamp
corner or 4 lamp square configuration. It is fabricated in 18 gauge steel and post
painted. The housing is vented for maximum heat dissipation and cool operation.
FC
TRIM OPTION:
Post painted powder coated Die-Cast trim ring is available in white. Please
consult factory for custom paint color options.
TRIM- LESS:
All steel perforated meshcover intended for installation in drywall or plaster
ceilings. Mudding may be applied right up to the edge of the fixture opening to
provide seamless appearance.
F U S I FUSION
O N FFCC METAL
P A HALIDE
R 3 0 SERIES
C M H
S E R I E S
462
AIMING:
Fusion FC multi-lamp luminaries are have full adjustable aiming capability
which allows the double gimbal mechanism to rotate 359º and pivot 90º and
lock in place at the desired position.
LAMPS:
Each lamp holder can individually be removed and lamped from the front. Each
lamp holder may be locked in position separately.
MOUNTING:
Is constructed from 18-gauge steel and can be adjusted vertically. May be
installed with 3/4” or 1-1/2” lathing channel, 1/2” EMT, or optional C-Channel
mounting bars are available.
ACCESSORIES:
The perfect lighting ambience may be accomplished by utilizing the optical
accessories available for Fusion FC multi-lamp luminaries.
LABELS:
c-UL-us listed for Damp location.
c-UL-us listed for feed Through Wiring.
WARRANTY:
Fusion FC multi-lamp luminaries are covered by Fusion’s one year limited
warranty. As a system, we stand behind our entire products from housing to
bar hangers.
ELECTRICAL:
Junction box and transformer may be accessed from below the ceiling. Junction
Box is Listed for through branch circuit wiring,12 AWG 90º C supply Conductors,
and has four 1/2” KOs, one 3/4” KO and four Romex knockouts with true pryout slots and strain clamps. De-rated lamp wattage labeling is available, please
consult factory.
ORDERING INFORMATION
Example: FC3-PAR30-CMH-N-20W-120-F-WH-BK
N
20W
120
SERIES
TYPE
WATTAGE
VOLTAGE
FC1-PAR30-CMH
FC2-PAR30-CMH
FC3-PAR30-CMH
FC4-PAR30-CMH
FCL-PAR30-CMH
FCX-PAR30-CMH
N - (New
Construction)
FC3-PAR30-CMH
20W
39W
70W
120V
277V
WH
BK
FLANGE OPTION
TRIM
INTERIOR COLOR
F - (Flanged)
T - (Trimless)
WH - (White)
BK - (Black)
ACCESSORIES
BP31 -27” C-channel bar
hangers
WWW.IUSEFUSION.COM • TEL 1-877-375-5555 • FAX 1-877-375-3333
FUSION FC HID SERIES
PAR30 CMH MULTI LAMP ADJUSTABLE RECESSED
DIMENSION
A
A = 13-1/2”
B = 8-1/2”
C = 12”
D = 17”
E = 8-1/2”
F = 7-1/2”
G = 6-1/2”
H = 5-5/8”
C
H F
B
G
E
D
A
DIMENSION
A = 19-3/8”
B = 8-1/2”
C = 12”
D = 22-7/8”
E = 14-3/8”
F = 7-1/2”
G = 12-3/8”
H = 5-5/8”
C
H F
B
G
E
D
A = 25-1/4”
B = 8-1/2”
C = 12”
D = 28-3/4”
E = 20-1/4”
F = 7-1/2”
G = 18-1/4”
H = 5-5/8”
C
H F
B
G
E
D
C
FC
H F
B
FC4-PAR30-CMH
A
F U S I O N
G
E
D
F C
DIMENSION
P A R 3 0
C
H F
B
G
D
FCL-PAR30-CMH
S E R I E S
A
C
H F
B
E
C M H
E
DIMENSION
A = 19-1/4”
B = 14-3/4”
C = 12”
D = 22-3/4”
E = 14-3/8”
F = 13-5/8”
G = 12-3/8”
H = 11-5/8”
FC3-PAR30-CMH
A
DIMENSION
A = 18-1/2”
B = 15-3/4”
C = 12”
D = 22”
E = 14”
F = 14”
G = 12”
H = 12”
FC2-PAR30-CMH
A
DIMENSION
A = 31-1/8”
B = 8-1/2”
C = 12”
D = 34-5/8”
E = 26-1/4”
F = 7-1/2”
G = 24-1/4”
H = 5-5/8”
FC1-PAR30-CMH
G
D
FCX-PAR30-CMH
* Up to 2 inches may need to be added to the height of the fixtures based on the required ballast or transformer.
Due to the changes of constant improvement in lighting technology, all details are subject to change without notice.
Consult factory for up to date information.
463
FUSION FC HID SERIES
CMH MULTI LAMP ADJUSTABLE RECESSED
ADJUSTABILITY FUNCTION
The Fusion fixture tilt 45º and
rotate 90º for making setting
consistent simple and effort-less.
DESCRIPTION:
Fusion FC multi-lamp luminaries are ideal for downlighting, accenting or a combination of both in any retail, hospitality, lobby, residential or commercial space. It’s
unique double gimbal mechanisms locks in position to assure the perfect ambiance and design at all times.
HOUSING:
Thermally protected, specification grade multi-lamp recessed luminaire. It is
designed for new construction non-insulated ceilings or where insulation can
be kept 3” from housing. It is available in 1, 2, 3 and 4 lamp linear, and 3 lamp
corner or 4 lamp square configuration. It is fabricated in 18 gauge steel and post
painted. The housing is vented for maximum heat dissipation and cool operation.
FC
F U S I O N
F C FC
M METAL
E T A LHALIDE
H A SERIES
L I D E
FUSION
S E R I E S
464
TRIM OPTION:
Post painted powder coated Die-Cast trim ring is available in white. Please
consult factory for custom paint color options.
TRIM- LESS:
All steel perforated meshcover intended for installation in drywall or plaster
ceilings. Mudding may be applied right up to the edge of the fixture opening to
provide seamless appearance.
AIMING:
Fusion FC multi-lamp luminaries are have full adjustable aiming capability
which allows the double gimbal mechanism to rotate 359º and pivot 90º and
lock in place at the desired position.
LAMPS:
Each lamp holder can individually be removed and lamped from the front. Each
lamp holder may be locked in position separately.
MOUNTING:
Is constructed from 18-gauge steel and can be adjusted vertically. May be
installed with 3/4” or 1-1/2” lathing channel, 1/2” EMT, or optional C-Channel
mounting bars are available.
ACCESSORIES:
The perfect lighting ambience may be accomplished by utilizing the optical
accessories available for Fusion FC multi-lamp luminaries.
LABELS:
c-UL-us listed for Damp location.
c-UL-us listed for feed Through Wiring.
WARRANTY:
Fusion FC multi-lamp luminaries are covered by Fusion’s one year limited
warranty. As a system, we stand behind our entire products from housing to
bar hangers.
ELECTRICAL:
Junction box and transformer may be accessed from below the ceiling. Junction
Box is Listed for through branch circuit wiring,12 AWG 90º C supply Conductors,
and has four 1/2” KOs, one 3/4” KO and four Romex knockouts with true pryout slots and strain clamps. De-rated lamp wattage labeling is available, please
consult factory.
ORDERING INFORMATION
Example: FC3-CMH-T6-N-39W-120-F-WH-BK
N
20W
120
SERIES
TYPE
WATTAGE
VOLTAGE
FC1-CMH-T6
FC2-CMH-T6
FC3-CMH-T6
FC4-CMH-T6
FCL-CMH-T6
FCX-CMH-T6
N - (New
Construction)
FC3-PAR30-CMH
39W
70W
120V
277V
WH
BK
FLANGE OPTION
TRIM
INTERIOR COLOR
ACCESSORIES
F - (Flanged)
T - (Trimless)
WH - (White)
BK - (Black)
BP31 -27” C-channel
bar hangers
WWW.IUSEFUSION.COM • TEL 1-877-375-5555 • FAX 1-877-375-3333
FUSION FC HID SERIES
CMH MULTI LAMP ADJUSTABLE RECESSED
DIMENSION
A
A = 13-1/2”
B = 8-1/2”
C = 12”
D = 17”
E = 8-1/2”
F = 7-1/2”
G = 6-1/2”
H = 5-5/8”
C
H F
B
G
E
D
A
DIMENSION
A = 19-3/8”
B = 8-1/2”
C = 12”
D = 22-7/8”
E = 14-3/8”
F = 7-1/2”
G = 12-3/8”
H = 5-5/8”
C
H F
B
G
E
D
A = 25-1/4”
B = 8-1/2”
C = 12”
D = 28-3/4”
E = 20-1/4”
F = 7-1/2”
G = 18-1/4”
H = 5-5/8”
C
H F
B
G
E
D
C
B
G
E
D
FC4-CMH
F C
A
M E T A L
C
H F
G
FCL-CMH
D
A
S E R I E S
DIMENSION
C
H F
B
E
H A L I D E
B
E
F U S I O N
H F
DIMENSION
A = 19-1/4”
B = 14-3/4”
C = 12”
D = 22-3/4”
E = 14-3/8”
F = 13-5/8”
G = 12-3/8”
H = 11-5/8”
FC
FC3-CMH
A
DIMENSION
A = 18-1/2”
B = 15-3/4”
C = 12”
D = 22”
E = 14”
F = 14”
G = 12”
H = 12”
FC2-CMH
A
DIMENSION
A = 31-1/8”
B = 8-1/2”
C = 12”
D = 34-5/8”
E = 26-1/4”
F = 7-1/2”
G = 24-1/4”
H = 5-5/8”
FC1-CMH
G
D
FCX-CMH
* Up to 2 inches may need to be added to the height of the fixtures based on the required ballast or transformer.
Due to the changes of constant improvement in lighting technology, all details are subject to change without notice.
Consult factory for up to date information.
465
FUSION FC LED LAMP/ INCANDESCENT SERIES
PAR30 MULTI LAMP ADJUSTABLE RECESSED
ADJUSTABILITY FUNCTION
The Fusion fixture tilt 45º and
rotate 90º for making setting
consistent simple and effort-less.
DESCRIPTION:
Fusion FC multi-lamp luminaries are ideal for downlighting, accenting or a combination of both in any retail, hospitality, lobby, residential or commercial space. It’s
unique double gimbal mechanisms locks in position to assure the perfect ambiance and design at all times.
HOUSING:
Thermally protected, specification grade multi-lamp recessed luminaire. It is
designed for new construction non-insulated ceilings or where insulation can
be kept 3” from housing. It is available in 1, 2, 3 and 4 lamp linear, and 3 lamp
corner or 4 lamp square configuration. It is fabricated in 18 gauge steel and post
painted. The housing is vented for maximum heat dissipation and cool operation.
FC
F U S I O N
F C
L E D
L A M P / I N C A N D E S C E N T
S E R I E S
466
TRIM OPTION:
Post painted powder coated Die-Cast trim ring is available in white. Please
consult factory for custom paint color options.
TRIM- LESS:
All steel perforated meshcover intended for installation in drywall or plaster
ceilings. Mudding may be applied right up to the edge of the fixture opening to
provide seamless appearance.
AIMING:
Fusion FC multi-lamp luminaries are have full adjustable aiming capability
which allows the double gimbal mechanism to rotate 359º and pivot 90º and
lock in place at the desired position.
LAMPS:
Each lamp holder can individually be removed and lamped from the front. Each
lamp holder may be locked in position separately.
MOUNTING:
Is constructed from 18-gauge steel and can be adjusted vertically. May be
installed with 3/4” or 1-1/2” lathing channel, 1/2” EMT, or optional C-Channel
mounting bars are available.
ACCESSORIES:
The perfect lighting ambience may be accomplished by utilizing the optical
accessories available for Fusion FC multi-lamp luminaries.
LABELS:
c-UL-us listed for Damp location.
c-UL-us listed for feed Through Wiring.
WARRANTY:
Fusion FC multi-lamp luminaries are covered by Fusion’s one year limited
warranty. As a system, we stand behind our entire products from housing to
bar hangers.
ELECTRICAL:
Junction box may be accessed from below the ceiling. Junction Box is Listed
for through branch circuit wiring,12 AWG 90º C supply Conductors, and has
four 1/2” KOs, one 3/4” KO and four Romex knockouts with true pry-out
slots and strain clamps. De-rated lamp wattage labeling is available, please
consult factory.
ORDERING INFORMATION
Example: FC3-INC-N-75W-PAR30-120-F-WH-BK
FC3-INC
N
75W
120
SERIES
TYPE
WATTAGE
VOLTAGE
FC1-INC
FC2-INC
FC3-INC
FC4-INC
FCL-INC
FCX-INC
N - (New
Construction)
75W-PAR30
10W-PAR30-LED
12W-PAR30-LED
120V
277V
FLANGE OPTION
F - (Flanged)
T - (Trimless)
WH
BK
TRIM
INTERIOR COLOR
ACCESSORIES
BK - (Black)
BP31 -27” C-channel
bar hangers
WH - (White)
WWW.IUSEFUSION.COM • TEL 1-877-375-5555 • FAX 1-877-375-3333
FUSION FC LED LAMP/ INCANDESCENT SERIES
PAR30 MULTI LAMP ADJUSTABLE RECESSED
DIMENSION
A
A = 13-1/2”
B = 8-1/2”
C = 8-1/2”
D = 17”
E = 8-1/2”
F = 7-1/2”
G = 6-1/2”
H = 5-1/2”
C
H F
B
G
E
D
A
DIMENSION
A = 19-3/8”
B = 8-1/2”
C = 8-1/2”
D = 22-7/8”
E = 14-3/8”
F = 7-1/2”
G = 12-3/8”
H = 5-1/2”
C
H F
B
G
E
D
A = 25-1/4”
B = 8-1/2”
C = 8-1/2”
D = 28-3/4”
E = 20-1/4”
F = 7-1/2”
G = 18-1/4”
H = 5-1/2”
C
H F
B
FC3-INC
C
F U S I O N
A
H F
F C
B
FC4-INC
C
H F
B
E
G
D
FCL-INC
A
DIMENSION
C
S E R I E S
H F
B
E
G
D
Due to the changes of constant improvement in lighting technology, all details are subject to change without notice.
Consult factory for up to date information.
L E D / I N C A N D E S C E N T
A
P A R
G
E
D
DIMENSION
A = 19-1/4”
B = 14-3/4”
C = 8-1/2”
D = 22-3/4”
E = 14-3/8”
F = 13-5/8”
G = 12-3/8”
H = 11”
FC
G
E
D
DIMENSION
A = 18-1/2”
B = 15-3/4”
C = 8-1/2”
D = 22”
E = 14”
F = 14”
G = 12”
H = 11”
FC2-INC
A
DIMENSION
A = 31-1/8”
B = 8-1/2”
C = 8-1/2”
D = 34-5/8”
E = 26-1/4”
F = 7-1/2”
G = 24-1/4”
H = 5-1/2”
FC1-INC
FCX-INC
467
FUSION MX SERIES - MR16
LOW VOLTAGE MULTI LAMP RECESSED LUMINAIRE
ADJUSTABILITY FUNCTION
The Fusion fixture tilt 45º and
rotate 90º for making setting
consistent simple and effort-less.
DESCRIPTION:
The Fusion proprietary MX-FLEX system makes the possibility of accent, task, downlighting and wall washing by only utilizing one recessed luminaire a reality. You
are empowered to design the ideal lighting atmosphere. Fusion MX multi-lamp luminaries are ideal for downlighting, accenting or a combination of both in any retail,
hospitality, lobby, residential or commercial space. Fusion MX luminaires are uniquely designed for shallow plenum ceilings .
MX
HOUSING:
Thermally protected specification grade multi-lamp recessed luminaire. For new
construction non-insulated ceilings or where insulation can be kept 3” from
housing. Available in 1, 2, 3, 4 and 6 lamp linear configuration. Fabricated in 18
gauge steel and post painted. Housing is vented for maximum heat dissipation
and cool operation.
LAMPS:
GU5.3 Base. Each MR-16 lamp holder can be individually be removed and
lamped from the front. Baffle is standards on all lamp holder, snoot and or cross
blade option is also available. Each lamp holder may take up to two optical
accessories.
LED lamps provided with PHILIPS or GE LED MR16.
TRIM OPTION:
Post painted powder coated Die-Cast trim ring available in white. Please consult
factory for custom paint color options.
MOUNTING:
Is constructed from 18-gauge steel and can be adjusted vertically. May be
installed with 3/4” or 1-1/2” lathing channel, 1/2” EMT, or optional C-Channel
mounting bars are available.
TRIM- LESS:
All steel perforated meshcover intended for installation in drywall or plaster
ceilings. Mudding may be applied right up to the edge of the fixture opening to
provide seamless appearance.
F U S I O N
M X
L O W
V O L T A G E
S E R I E S
468
AIMING:
Fusion MX-FLEX multi-lamp luminaries have full adjustable aiming capability
which allows the double gimbal mechanism to rotate 359 degrees and pivot 90
degrees.
ELECTRICAL/ TRANSFORMER:
Junction box and transformer may be accessed from below the ceiling. Junction
Box is Listed for through branch circuit wiring,12 AWG 90º C supply Conductors,
and has four 1/2” KOs, one 3/4” KO and four Romex knockouts with true pryout slots and strain clamps. Transformer supplied is thermally protected Class
II dimming electronic transformer enhanced in heat dissipating cover attached
to junction box cover. De-rated lamp wattage labeling is available please
consult factory.
ACCESSORIES:
Three different Light Directing Elements are available through the Fusion
proprietary MX-FLEX system: Snoot, Cross Blade, Baffle.
The perfect lighting ambience may be accomplished by utilizing the optical
accessories available for Fusion MX-FLEX multi-lamp luminaries.
BAFFLE-Provided as
standard option
MX-BLADE-Crossblade
MX-SNOOT-Snoot
LABELS:
c-UL-us listed for Damp location.
c-UL-us listed for feed Through Wiring.
WARRANTY:
Fusion MX-FLEX multi-lamp luminaries are covered by Fusion’s one year limited
warranty. As a system, we stand behind our entire products from housing to
bar hangers.
ORDERING INFORMATION
Example: MX3-LV-N-50W-MR16-E-120-F-WH-BK
SERIES
TYPE
WATTAGE
BALLAST
MX1-LV
MX2-LV
MX3-LV
MX4-LV
MX6-LV
N - (New
Construction)
20W-MR16
37W-MR16
42W-MR16
50W-MR16
71W-MR16
E - (Electronic)
VOLTAGE
120V
277V
FLANGE OPTION
TRIM
INTERIOR COLOR
F - (Flanged)
T - (Trimless)
WH - (White)
BK - (Black)
ACCESSORIES
OPTIONS
Blank - Standard Baffle RIF - RIF filter
MX-BLADE - Crossblade
MX-SNOOT - Snoot
OPTICAL ACCESSORIES
BP8MR16-FR
BP8MR16-SP
BP8MR16-SF
BP8MR16-HC
BP8MR16-LI
- Frosted
- Spread
- Soft focus
- Honey comb
- Linear
BP8MR16-SO - Solite
BP8MR16-CL - Clear
BP8MR16-UV - Ultraviolet
* COLOR FILTERS ALSO AVAILABLE
WWW.IUSEFUSION.COM • TEL 1-877-375-5555 • FAX 1-877-375-3333
FUSION MX SERIES - MR16
LOW VOLTAGE MULTI LAMP RECESSED LUMINAIRE
DIMENSION
A
A = 10-5/8”
B = 5-1/8”
C = 5-1/2”
D = 17-3/4”
E = 4-7/8”
F = 4-7/8”
G = 4”
H = 3-1/2”
C
H F
B
G
E
D
A
DIMENSION
A = 14”
B = 5-1/8”
C = 5-1/2”
D = 21-1/8”
E = 8-1/8”
F = 4-7/8”
G = 7-3/4”
H = 3-1/2”
C
H F
B
G
E
D
DIMENSION
MX
C
H F
B
MX3-LV-N
M X
A
L O W
C
H F
G
E
D
MX4-LV-N
V O L T A G E
B
M X
DIMENSION
F U S I O N
G
E
D
DIMENSION
A
C
S E R I E S
A = 30-5/8”
B = 5-1/8”
C = 5-1/2”
D = 38”
E = 22-7/8”
F = 4-7/8”
G = 22-1/8”
H = 3-1/2”
MX2-LV-N
A
A = 16-1/2”
B = 5-1/8”
C = 5-1/2”
D = 24-1/2”
E = 11-3/4”
F = 4-7/8”
G = 11”
H = 3-1/2”
A = 21-1/2”
B = 5-1/8”
C = 5-1/2”
D = 28-1/2”
E = 15-1/2”
F = 4-7/8”
G = 14-5/8”
H = 3-1/2”
MX1-LV-N
H F
B
G
E
D
Due to the changes of constant improvement in lighting technology, all details are subject to change without notice.
Consult factory for up to date information.
MX6-LV-N
469
FUSION MX SERIES - MR16
METAL HALIDE MULTI LAMP RECESSED LUMINAIRE
ADJUSTABILITY FUNCTION
The Fusion fixture tilt 45º and
rotate 90º for making setting
consistent simple and effort-less.
DESCRIPTION:
The Fusion proprietary MX-FLEX system makes the possibility of accent, task, downlighting and wall washing by only utilizing one recessed luminaire a reality. You
are empowered to design the ideal lighting atmosphere. Fusion MX multi-lamp luminaries are ideal for downlighting, accenting or a combination of both in any retail,
hospitality, lobby, residential or commercial space. Fusion MX luminaires are uniquely designed for shallow plenum ceilings .
HOUSING:
Thermally protected specification grade multi-lamp recessed luminaire. For new
construction non-insulated ceilings or where insulation can be kept 3” from
housing. Available in 1, 2, 3, 4 and 6 lamp linear configuration. Fabricated in 18
gauge steel and post painted. Housing is vented for maximum heat dissipation
and cool operation.
MX
F U S I O N
M X
M E T A L
H A L I D E
S E R I E S
470
TRIM OPTION:
Post painted powder coated Die-Cast trim ring available in white. Please consult
factory for custom paint color options.
TRIM- LESS:
All steel perforated meshcover intended for installation in drywall or plaster
ceilings. Mudding may be applied right up to the edge of the fixture opening to
provide seamless appearance.
LAMPS:
GX10 Base. Each CMH lamp holder can be individually be removed and lamped
from the front. Baffle is standards on all lamp holder, snoot and or cross blade
option is also available. Each lamp holder may take up to two optical accessories.
MOUNTING:
Is constructed from 18-gauge steel and can be adjusted vertically. May be
installed with 3/4” or 1-1/2” lathing channel, 1/2” EMT, or optional C-Channel
mounting bars are available.
ACCESSORIES:
Three different Light Directing Elements are available through the Fusion
proprietary MX-FLEX system: Snoot, Cross Blade, Baffle.
The perfect lighting ambience may be accomplished by utilizing the optical
accessories available for Fusion MX-FLEX multi-lamp luminaries.
AIMING:
Fusion MX-FLEX multi-lamp luminaries have full adjustable aiming capability
which allows the double gimbal mechanism to rotate 359 degrees and pivot 90
degrees.
ELECTRICAL/ TRANSFORMER:
Junction box and transformer may be accessed from below the ceiling. Junction
Box is Listed for through branch circuit wiring,12 AWG 90º C supply Conductors,
and has four 1/2” KOs, one 3/4” KO and four Romex knockouts with true pry-out
slots and strain clamps. High Performance and energy efficient power controlled
electronic ceramic metal halide ballasts attached to junction box. De-rated lamp
wattage labeling is available please consult factory.
BAFFLE-Provided as
standard option
MX-BLADE-Crossblade
MX-SNOOT-Snoot
LABELS:
c-UL-us listed for Damp location.
c-UL-us listed for feed Through Wiring.
WARRANTY:
Fusion MX-FLEX multi-lamp luminaries are covered by Fusion’s one year limited
warranty. As a system, we stand behind our entire products from housing to bar
hangers.
ORDERING INFORMATION
Example: MX3-CMH-N-20W-MR16-E-120-F-WH-BK
SERIES
MX1-CMH
MX2-CMH
MX3-CMH
MX4-CMH
MX6-CMH
TYPE
N - (New
Construction)
WATTAGE
20W-MR16
39W-MR16
BALLAST
E - (Electronic)
VOLTAGE
120V
277V
FLANGE OPTION
F - (Flanged)
T - (Trimless)
TRIM
INTERIOR COLOR
WH - (White)
BK - (Black)
ACCESSORIES
Blank - Standard Baffle
MX-BLADE - Crossblade
MX-SNOOT - Snoot
OPTICAL ACCESSORIES
BP8MR16-FR
BP8MR16-SP
BP8MR16-SF
BP8MR16-HC
BP8MR16-LI
- Frosted
- Spread
- Soft focus
- Honey comb
- Linear
BP8MR16-SO - Solite
BP8MR16-CL - Clear
BP8MR16-UV - Ultraviolet
* COLOR FILTERS ALSO AVAILABLE
WWW.IUSEFUSION.COM • TEL 1-877-375-5555 • FAX 1-877-375-3333
FUSION MX SERIES - MR16
METAL HALIDE MULTI LAMP RECESSED LUMINAIRE
A
DIMENSION
A = 10-5/8”
B = 5-1/8”
C = 5-1/2”
D = 17-3/4”
E = 4-7/8”
F = 4-7/8”
G = 4”
H = 3-1/2”
C
H F
B
G
E
D
A
DIMENSION
A = 14”
B = 5-1/8”
C = 5-1/2”
D = 21-1/8”
E = 8-1/8”
F = 4-7/8”
G = 7-3/4”
H = 3-1/2”
C
H F
B
G
E
D
MX
C
H F
B
G
E
D
DIMENSION
MX3-CMH
M X
A
M E T A L
C
H F
B
MX4-CMH
C
S E R I E S
A
H F
B
G
E
D
Due to the changes of constant improvement in lighting technology, all details are subject to change without notice.
Consult factory for up to date information.
H A L I D E
G
E
D
DIMENSION
F U S I O N
A = 16-1/2”
B = 5-1/8”
C = 5-1/2”
D = 24-1/2”
E = 11-3/4”
F = 4-7/8”
G = 11”
H = 3-1/2”
A = 30-5/8”
B = 5-1/8”
C = 5-1/2”
D = 38”
E = 22-7/8”
F = 4-7/8”
G = 22-1/8”
H = 3-1/2”
MX2-CMH
A
DIMENSION
A = 21-1/2”
B = 5-1/8”
C = 5-1/2”
D = 28-1/2”
E = 15-1/2”
F = 4-7/8”
G = 14-5/8”
H = 3-1/2”
MX1-CMH
MX6-CMH
471
Download