10300002_ZOD_H04_UK_001
8-9-2010
12:55
Pagina 001
Chapter 4
Rear fender extension for the tri-bar LED
running/brake light kit
Chapter 4 is all about lights and electric. Marker
lights, turn signals, taillights, headlights, switches,
batteries, cables and much more. Whatever light
you are looking for Zodiac has got it, whether it is
stock replacement, Classic or the latest space-age
look Custom lights. Many of our turn signal lights,
marker lights and taillights are available with the
classic bulb as well as LED style lights. LED stands
for Light Emitting Diode. The latest LED’s are superbright, while using less power than common bulbs.
LED lights also live much longer than normal bulbs.
In this Chapter you will also find our Wire-Plus
complete wiring harness for stock and custom
bikes, RBS "Xenon" headlights and the latest stock
style taillights with bright shining LED's.
Indian Head fender ornaments feature
a lighted face
"Dancer" chrome billet aluminum headlights
Kellermann EU approved turn signals with
integrated tail & stop light function
10300002_ZOD_H04_UK_2
1-9-2010
17:17
Pagina 002
LED Lights
04
LED SADDLE BAG INTERIOR
LIGHTS
It is so convenient when you open your
saddlebag at night and a light comes on and
Cyron’s LED saddlebag lights make it
happen. The units mount with 2 sided tape
or Velcro. The LED heads go in the bag, the
magnet controlled switches mount on the
top of the bag and you are done. Units
feature 2 bright shining LED’s each, hand
controlled On/Off switches, magnetic
operated switches and include 3 each of
commonly available AG13 button cell
batteries. Units measure 1” x 2” x 5/8”
(25 mm x 50 mm x 17 mm).When you open
the bag the light goes on, when you close
the bag the light goes off.Also great for tool
chests, hatches, drawers, cabinets and
numerous other applications. These LED
saddlebag lights are sold in sets of 2.
740949 LED saddlebag lights (pair)
CYRON’S PROFESSIONAL LED
ACCENT LIGHTING KIT
If you have been looking for that eye
catching look in the evening, CYRON
Professional Accent Lighting Kits truly
compliment your ride. The “Gold” and
“Platinum” kits include everything needed
for a clean, professional install at a very
reasonable price.
Kits contain:
• Wireless On/Off remote control
• 4 x Convex5 LED clusters and 1 Nugett
4 LED cluster in the “Gold” kit
• 6 x Convex5 LED clusters and 2 Nugett
4 LED cluster in the “Platinum” kit
• Wire ties
• Ring terminals
• Butt splices
• Alcohol wipes
CYRON’S MULTICOLOR LED
ACCENT LIGHT KIT
Cyron’s accent light really does it all! Kits
come with 6 pieces of 8” long pre-wired
light bars, providing 18 Multicolor patterns,
12 display modes, including a Music Mode
that pulsates lights to any sound with
5 levels of sound sensitivity. Choose what
parts of the bike you want to light up in any
color you like! Another great feature is that
these kits come with a wireless remote
control. Great for your motorcycle but you
also may consider to install this on your
moped, scooter, RV, car, boat, trailer or any
other vehicle that is equipped with 12VDC.
740962 Cyrom Multicolor LED lighting
kit
In fact it contains all the components &
instructions for a hassle free D.I.Y. install.
All chromed plated LED clusters are ideal for
Harley-Davidson and other types of cruisers.
Kit are available with amber, blue, fuchsia,
green, purple or red LED’s.
“Gold” kit
740950
742901
740952
740953
740954
740955
04-002
“Platinum” kit
740956 Amber LED’s
742900 Blue LED’s
740958 Fuchsia LED’s
740959 Green LED’s
740960 Purple LED’s
740961 Red LED’s
CYRON’S WIRELESS ON/OFF
REMOTE CONTROL UNIT
This remote control unit is exactly the same
one as included in Cyron’s “Gold” and
“Platinum” kits. It allows you to turn your
lighting system on or off from up to 100 feet
(30 meters) away! This is that final touch to
make your LED lighting system 100%
complete and custom. The remote will
replace the on-off switch and making the
system totally invisible and tamper proof.
3 Amp relay contact rating. Not limited for
motorcycle use. RC1-12 can be used to
On/Off any 12VDC electrical device!
740999 Remote Control Unit
10300002_ZOD_H04_UK_3
1-9-2010
17:18
Pagina 003
LED Lights
04
CYRON’S NUGGET4 LED ACCENT
LIGHTS
Four super bright LED’s in a small oval
shaped “pod” style. Approximately half the
size of “the other” product that is widely
sold but has a just as bright light. Made with
wide angle LED’s which light up a larger
area, minimizing the hot spots created with
the cheaper products. Comes with 4 feet of
lead wire installed. Features VHB 3M™ tape
on backside for easy installation. Available
in chrome or mat black finish with Amber,
Blue, Fuchsia, Green, Purple or Red LED’s.
Chrome
740963
740964
740965
740966
740967
740968
Black
740969
N/A
740971
740972
740973
740974
Amber LED’s
Blue LED’s
Fuchsia LED’s
Green LED’s
Purple LED’s
Red LED’s
CYRON CONVEX5 LED CLUSTER
LIGHTS
The Convex5 features 5 wide-angle super
bright LED’s in a smooth convex shaped
housing, making it the brightest and widest
angle “step” light available. Due to their
wide angle light, the Convex5 will project
an even glow of light eliminating the hot
spots caused by average LED’s. Lights come
with 4 feet long lead wires installed and
feature VHB 3M™ tape on backside for easy
installation. Available in chrome or mat
black finish with Amber, Blue, Fuchsia,
Green, Purple or Red LED’s.
Chrome
740975
740976
740977
740978
740979
740980
Black
740981
740982
740983
740984
740985
740986
Amber LED’s
Blue LED’s
Fuchsia LED’s
Green LED’s
Purple LED’s
Red LED’s
CYRON FLEX LED ACCENT LIGHTS
Cyron’s Flex LED lights provide all sorts of
flexibility! This is what every professional
has always asked for. Diffused light similar
to neon but made with LED. Waterproof,
Heat resistant, Extremely flexible, available
in several colors. Flex LED is simply the best
in LED lighting. Flex LED is ideal for accent
lighting. Has two feet automotive grade
jacketed-wire and operates on 12VDC.
Available in 10” long with 24 super bright
LED’s, or 7” long, with 18 super bright LED’s.
Pick your choice from Amber, Blue, Fuchsia,
Green, Purple or Red LED’s.
10” 24-LED
740987
740988
740989
740990
740991
740992
CYRON CONVEX-6 LED LIGHTS
Cyron cliams that their LED lights are brighter
and smaller than all others.The six ultra-bright
LED's in the Convex-6 spread out 120 degrees
of continuous light in every planar direction.
Versatility in mounting allowing it to be
mounted on its back or sides using the included
high grade 3M VHB tape.For added protection
all LEDs have been protected with water proof
potting. Convex-6 lights come pre wired with
4 foot (1.2 meter) cords.
7” 18-LED
740993 Amber LED’s
740994 Blue LED’s
740995 Fuchsia LED’s
740996 Green LED’s
740997 Purple LED’s
740998 Red LED’s
Available in black or chrome finish and sold
in pairs.
742903 Chrome housing with red LED's,
pair
742904 Black housing with amber LED's,
pair
742905 Black housing with blue LED's,
pair
04-003
10300002_ZOD_H04_UK_4
1-9-2010
17:20
Pagina 004
Marker Lights
04
HI-POINT FORK MOUNTED LED
TURN SIGNALS
Hi-Point chrome plated turn signals, feature
TÜV & EC approved clear lenses and bolt
straight on to your forks for a clean look and
easy installation.These turn signals are sold
in pairs and feature 17 bright amber shining
LED’s each and come pre-wired for use as
turn signal only, or as a running and turn
signal combination. They are 3” (7.5 cm)
long and 2” (5 cm) in diameter.Available as
clamp-on for 39 mm forks as used in
Sportster, FXR and Dyna models, clamp-on
for 41 mm forks as used in Dyna Wide Glide,
Softail and Touring models, as well as a bolton version for 41 mm Wide Glide forks as
found on FLH and FLT series models.
165285 Clamp-on style, fits 39 mm
forks
165279 Clamp-on style, fits 41 mm
forks
165283 Bolt-on style, fits FLH and FLT
series models
BULLET MARKER LIGHT
Chrome-plated Bullet lights, with acrylic
lens. Lights are pre-wired. Single filament
includes 12 Volt 10 Watt bulb. Dual filament
includes 12 Volt 21/6 Watt bulb. Dual
filament can be used as running light in
combination with indicator light. For many
Custom applications.
162043 Red, single filament
162051 Red, dual filament
162046 Amber, single filament
162052 Amber, dual filament
162044 Clear, single filament
167370 12V 21/6W dual filament
replacement bulb (10 pack)
BULLET MARKER LIGHT
"WINGED"
Beautifully Chromed die-cast Bullet light
with wings and acrylic lens in two colors.
Light is pre-wired and includes 12 Volt single
filament bulb. Can be used as running light,
turn signal light or wired up to your brake or
taillight.
162025 Red
162026 Amber
BULLET MARKER LIGHT 3 WINGS
Beautifully Chrome-plated die-cast Bullet
lights with three-wings and red or amber
acrylic lens, in dual or single filament
versions. Can be used as running light, turn
signal light or wired up to your brake or
taillight. Light is pre-wired and includes
12 Volt bulb.
162078 Red, single filament
162079 Red, dual filament
162081 Amber, single filament
162085 Amber, dual filament
167370 12V 21/6W dual filament
replacement bulb (10 pack)
BULLET LIGHT MOUNTING KIT
Chrome-plated Bullet light mounting kit for
most swingarm models Big-Twin and
Sportster. This kit includes four Chromeplated mounting blocks and the hardware
to install the Bullet lights on the sides of the
top front fork clamp and rear fender strut.
162249 Bullet light mounting kit
LENSES FOR BULLET LIGHTS
Acrylic replacement lenses for our Bullet and
Winged Bullet lights.
165074 Red lens only
165075 Amber lens only
165076 Clear lens only
165088 Blue lens only
F OR A RLEN N ESS
MARKER LIGHTS
SEE SECTION
04-004
25
10300002_ZOD_H04_UK_5
1-9-2010
17:22
Pagina 005
Marker Lights
04
BULLET LIGHTS WITH VISOR
Our Chrome-plated Bullet lights are also
available with a classic looking visor. This
single filament Bullet light is pre-wired,
includes a 12 Volt 10 Watt bulb and has
acrylic lens red or amber lens. Other color
lenses are available. Usable for many
Custom applications.
162257 With Red lens
162258 With Amber lens
165074 Red lens only
165075 Amber lens only
165076 Clear lens only
165088 Blue lens only
BULLET LIGHTS WITH VISOR
Our Chrome-plated Bullet lights with visor
are also available with TÜV/EU approval.
They feature single filament 12 Volt 10 Watt
bulb are pre-wired and have Amber acrylic
lens. Usable for many Custom applications.
Note: TÜV/EU approved Bullet light lenses
are not interchangeable with non-approved
lenses
239189 With Amber lens, TÜV/"E"
approved
241106 Amber lens only, TÜV/"E"
approved
BULLET LIGHTS WITH MOUNTING
BRACKET
Chrome-plated Bullet lights, with acrylic red
lens and mounting bracket. Has single
filament 12 Volt 10 Watt bulb.Available with
left or right mount for many Custom
applications. Different color lenses are
separately available.
162082 Red Bullet light with left
mounting bracket
162090 Red Bullet light with right
mounting bracket
AUTO GEMS DERINGER LIGHTS
Deringer lights are designed to bolt to the
end of a stock Softail fender strut and
provide the nostalgic look many riders are
looking for. Deringer Lights come with real
glass red lenses, Stainless Steel bezel, are lit
up with a durable incandescent bulb
(0.065 AMPS) and are easy to install.
Separate lenses are available in amber, red,
green and blue. Sold in pairs.
711604 Deringer lights with red lenses
Replacement parts
721326 Amber Jewel lenses
721327 Red Jewel lenses
721328 Green Jewel lenses
721329 Blue Jewel lenses
721331 Replacement bulb, set of 2
BULLET MARKER LIGHTS WITH
EU-APPROVED HONEYCOMB
LENSES
These EU and TÜV approved Chrome-plated
Bullet lights feature the latest "Honeycomb"
amber acrylic lenses. Lights come with single
filament 12 Volt 10 Watt bulb and are prewired.These Bullet marker lights can be used
as running light or turn signal and are
available with 1/4” short or 3/4” long stud.
Sold each.
160457 With long stud
160458 With short stud
AUTO GEMS RETRO JEWELS
By stepping back in time Auto Gems found
the classic marker Jewels, used in the forties.
Auto Gems updated those Jewels by lighting
them up. When you cruise the boulevards,
let those Jewels light the way! Jewels come
with real glass lenses, Stainless Steel bezel
and are lit up with a durable incandescent
bulb (0.065 AMPS) and are easy to install.
Jewels are available in amber, red, green and
blue. Sold in pairs.
721326 Amber Jewel lenses
721327 Red Jewel lenses
721328 Green Jewel lenses
721329 Blue Jewel lenses
721331 Replacement bulb, set of 2
F OR A RLEN N ESS
MARKER LIGHTS
SEE SECTION
25
04-005
10300002_ZOD_H04_UK_6
1-9-2010
17:24
Pagina 006
Marker Lights
04
AUTO GEMS SHOT GUN
Classic Auto Gem Shot Gun come beautifully
Show-Chromed with real glass Jewel inserts.
Shot Gun will give your bike that classic look.
Will bolt straight to the 1992 to present FLT
fender struts but can be used for many
Custom applications. Shot Guns have Jewellike real glass lenses, Stainless Steel bezel
and are lit up with a durable incandescent
0.065 Amp bulb.
721330 Shot Gun Jewel, set of 2
721327 Red Jewel lenses
721331 Replacement bulb, set of 2
AUTO GEMS BABY BULLET
LIGHTS
The smallest Bullet lights on the market as
they measure only 1 1/8" diameter and are
2 1/4" from tip to tip. The Chrome-plated
housing has a 1" long 5/16”-18 mounting
stud. The 1” diameter real glass lenses are
held in position with a compression spring
and retention O-ring system. Baby Bullets
are sold in pairs with red lenses, separate
lenses are available in red, amber, and blue.
711600 Baby Bullet lights with red
lenses, set of 2
711601 Replacement red lenses
711602 Replacement blue lenses
711603 Replacement amber lenses
04-006
MINI OVAL MARKER LIGHTS
Show-chromed Mini Oval Marker Lights that
are very practical for being seen in the dark.
Universal bolt-on construction makes it easy
to fit them to almost any motorcycle.
Features E-approved clear lens and are sold
each.
160653 Mini oval marker light with
clear lens
INFINITY BULLET MARKER
LIGHTS
Chrome-plated marker lights are the
finishing touch for your Custom project.
These "Infinity" Bullet marker lights have a
Chrome-plated finish and are available
Smooth or Ball Milled in your choice of
amber or red lenses. Lights are pre-wired
and come with 12 Volt 21 Watt single
filament bulb or 21/6 CP dual filament bulb
installed. The marker lights with amber
lenses are available with or without TÜV/EU
approval. Lenses are available separately in
different colors. Infinity Bullet Marker lights
are sold in pairs, replacement lenses are sold
each.
“Smooth”, Single filament
162412 Pair, with amber lens
162454 Pair, with amber lens, TÜV/EU
approved
162413 Pair, with red lens
MINI SPEEDER MARKER LIGHTS
Mini Speeder marker lights are only 36 mm
(1 7/16") in diameter and 63 mm (2 1/2")
long, and have a 3/4" long 3/8" UNC stud.
Lights are chrome plated, pre-wired, and
come with your choice of dual or single
filament bulb.Two different styles to choose
from smooth or ball milled. All these lights
are supplied with red, as well as amber
lenses. Sold in sets of 2.
Smooth Style
160588 With single filament bulbs
160640 With dual filament bulbs
Ball Milled Style
160636 With single filament bulbs
160637 With dual filament bulbs
“Smooth”, Dual filament
162462 Pair, with amber lens
162464 Pair, with red lens
“Ball Milled”, Single filament
162414 Pair, with amber lens
162455 Pair, with amber lens, TÜV/EU
approved
162415 Pair, with red lens
“Ball Milled”, Dual filament
162463 Pair, with amber lens
162465 Pair, with red lens
Replacement parts
162416 Amber lens
162456 Amber lens, TÜV/EU approved
162417 Red lens
162418 Blue lens
162419 Clear lens
162457 Bulb, 12 Volt 21 Watt (10 pack)
167370 12V 21/6W dual filament
replacement bulb (10 pack)
10300002_ZOD_H04_UK_7
1-9-2010
17:26
Pagina 007
Marker Lights
JOCKEY MARKER LIGHTS
Die-cast Chrome-plated marker lights.
Available with single filament and with your
choice of red or amber lens. Sold each.
160278 Amber, single filament
160280 Red, single filament
DIAMOND MARKER LIGHTS
Beautiful small marker lights for many
purposes. The die-cast housings have a
perfect Chrome finish and include a single
filament bulb. Available with red or amber
lens. Sold each.
162284 Marker light amber lens
162285 Marker light red lens
EU APPROVED BLACK
LED TURN SIGNAL
Small LED marker light with EU approval.
Features completely pre-wired black housing
to fit most motorcycles. This marker comes
with state of the art amber LED’s, and EU
approved clear lenses. Measures
1 3/8” high, 4 1/4” wide and 1 1/4”deep.
Sold each.
165236 Black LED marker light
MALTESE CROSS MARKER LIGHTS
Die-cast, 4” wide and 4” high marker lights
with show chrome finish. Universal singlebolt mounting that will fit almost any
motorcycle. Available in 1 3/4” short, or
3 1/2” long housing. Lights come pre-wired
and feature a clear lens with EU approval
mark. Sold each.
160657 Short
SKULL MARKER LIGHTS
Detailed, 3 dimensional design with a
chrome finish and red LED lighted eyes.
Lights are 2" high and sold in pairs.
162304 Skull marker lights (pair)
160661 Long
04
BILLET ALUMINUM LED MALTESE
CROSS MARKER LIGHTS WITH
CHROME PLATED FINISH
A great match with the popular Maltese
cross taillight. Housings are CNC machined
from solid aluminum and have a showchrome finish. Each marker light features
45 bright, red shining 12 Volt LED's. Sold in
sets of 2, measure 2 1/2" X 2 1/2", and
come pre-wired.
160609 Chrome billet aluminum
Maltese Cross LED marker
lights, pair
FLUSH MOUNT MARKER LIGHTS
These wedge-shaped marker lights feature
unique styling and heavy die-cast
construction. They have a 12 V single
filament bulb. Available in Chrome or Gold
finish. Lights have black finished side slots.
They come complete with all necessary
hardware and are packed and sold in pairs.
Lights come with a set of amber as well as
a set of red lenses.
165127 Marker light Chrome (set 2)
165131 Marker light gold (set 2)
Lenses only
165134 Red
165136 Amber
165142 Clear
F OR A RLEN N ESS
MARKER LIGHTS
SEE SECTION
25
04-007
10300002_ZOD_H04_UK_8
1-9-2010
17:28
Pagina 008
Marker Lights & Turn Signals
04
EU APPROVED UNIVERSAL LED
MARKER LIGHTS
Features two threaded studs on chromeplated die-cast housing for easy installation
on most flat surfaces. These markers come
pre-wired, feature amber LED’s and EU
approved clear lenses. Dimensions are
1 3/4” high, 2 1/2" wide and 3/4" deep.
Sold in pairs.
165242 Pair LED marker lights
EU APPROVED CHROME LED
TURN SIGNAL
Compact shaped LED marker light with EU
approval. Features pre-wired chrome
housing to fit most motor-cycles.This marker
comes with amber LED’s, and EU approved
clear lenses. Measures 1 5/8” high,
2 3/4” wide and 1 3/8” deep. Sold in pairs.
165247 Chrome LED marker lights, pair
WEDGE-SHAPED LIGHTS
These beautifully Chrome-plated wedgeshaped lights feature unique styling and diecast construction.They’re available with red
or amber lens and have single filament
bulbs. The size is approximately 3.5"
long x 1.25" wide (90 x 30 mm). Sold each.
160077 Wedge light with red lens
160081 Wedge light with amber lens
SIDE MOUNT MARKER LIGHTS
These exclusive die-cast side mount marker
lights feature a unique design. They feature
two 12 V single filament bulbs per light and
are available in chrome finish or gold plated
with black slots. Come with all hardware and
are packed and sold in pairs. Chrome lights
have amber lensen, the gold plated version
comes with a set of amber as well as a set
of red lenses.
165129 Chrome marker lights, pair
165135 Gold marker lights with black
accents, pair
235142 Replacement bulbs (dealer 10pack)
UNIVERSAL FLUSH MOUNT
MARKER LIGHTS
These flush mount lights come with amber
lenses and chrome-plated die-cast housing.
Feature two threaded mounting holes for
easy installation on most flat surfaces such
as fender struts. Dimensions are 1 1/8" high,
5 5/8" wide and 1 3/8" deep. Sold each.
165211 Flush mount marker light
LED MARKER LIGHTS
These LED marker lights are only
3 19/64” (84 mm) long, 1 9/64” (29 mm)
high, and just 15/16” (24 mm) deep. They
feature 2 threaded mounting studs and can
be flush mounted to any flat surface. Lights
come pre-wired and are available with red
or amber E-marked lenses.
160773 With red lens
160774 With amber lens
EU APPROVED BLACK HEART LED
TURN SIGNAL
Small LED turn signal with EU approval.
Features fancy heart shaped pre-wired black
housing to fit most motorcycles.This marker
comes with state of the art amber LED’s, and
EU approved clear lenses. Dimensions are
1 5/8” high, 2 3/4" wide and 1 1/4" deep.
Sold each.
165240 Black heart LED marker light
F OR A RLEN N ESS
MARKER LIGHTS
SEE SECTION
04-008
25
10300002_ZOD_H04_UK_9
1-9-2010
17:30
Pagina 009
Marker Lights & Turn Signals
04
MARKER LIGHT
Show-Chromed die-cast marker light. Our
latest style running light. For many Custom
applications. Light is pre-wired and includes
a 12 Volt single filament bulb. Replacement
lenses are available. Sizes: 60 mm wide,
60 mm deep, 5 mm tall.
MINI MARKER LIGHT
Show-Chromed die-cast mini marker light.
Used for many Custom applications.
Available in 3 colors. Replacement lenses
are available. Sizes: 45 mm wide, 45 mm
deep, 40 mm tall.
Marker lights
162058 Red
162059 Amber
Mini Marker lights
163008 Red
163010 Amber
163012 Clear
Lenses only
165094 Red
165098 Clear
165092 Amber
Lenses only
165134 Red
165136 Amber
165142 Clear
HANDLEBAR MARKER LIGHT
Beautiful die-cast light housing with a
Chromed finish. Will fit any 1" diameter
handlebar. Will also fit 7/8" handlebars if
our reducer sleeves (ZPN 242000) are used.
Sold in pairs.
162295 Marker light, red lens
EU APPROVED COMPACT LED
TURN SIGNAL
This turn signal features amber LED's, clear
lens with EU approval, and compact black
housing.The compact unit measures only 1"
high, 2 1/2" wide and 1 1/2" deep. Sold
each.
165252 LED Turn signal
EU APPROVED LED MINI MARKER
LIGHTS
Almost invisible and in fact one of the
smallest marker lights on the market. These
markers come with pre-wired, feature
chrome-plated stems, state of the art amber
LED’s and EU approved clear lenses. Marker
lights are 7/8” high, 2 7/8” wide and
7/8” deep. Sold in pairs.
165245 Pair LED mini marker lights
DIACON MARKER LIGHTS
These small marker lights have an unique
shape to them. They feature one-piece, diecast housings with integrated pedestal
bases and exceptional Chrome plating. Each
light has a 12-Volt 4 Watt single filament
bulb and is available with your choice of a
red or amber lens which measures1 1/4"
high x 1 7/8" wide. Sold each. Lenses are
separately available.
162087 Diacon light red
162088 Diacon light amber
162097 Red lens only
162099 Amber lens only
RBS LED BILLET BULLET STYLE
TURN SIGNAL KITS
These bullet style turn signal kits feature
bright shining LED's in precision machined
billet aluminum housings. Made in Germany
by RBS. Available in polished, chrome or
black finish. Sold in sets of 4.
722470 Polished
722471 Chrome
722472 Black
04-009
10300002_ZOD_H04_UK_10
1-9-2010
17:33
Pagina 010
Marker Lights & Fender Lights
04
CHROME "OX-EYE" HANDLEBAR
TURN SIGNALS
Easy to mount indicators, the included
mounting hardware allows direct
installation in the ends of 1" diameter
handlebars. Features pre-wired chrome
housing, bulb, and EU approved amber
lenses on both front and rear side. Measure
2" high, 2 1/4" wide, and 2" deep. Sold
each.
165225 Ox-Eye indicators
ROUND LED MINI MARKER
LIGHTS
These 1 1/2" diameter round marker lights
feature four bright shining amber LED's in a
clear housing, or white LED's in an amber
housing. Easy to install in the end of your
handlebar, just punch a slightly smaller hole
in your handlebar grips and insert the light
unit. Unit comes pre-wired. Sold each.
165237 Marker light with clear lens and
amber LED's
165263 Marker light with amber lens
LED 1 5/8" CHROME BEACON
BULLET LIGHTS
These 1 5/8" diameter and only 2 3/4" long,
Chrome-plated die-cast Bullet lights are the
latest on the market. Each light features
13 or 19 LED’s (Light Emitting Diodes).They
have a universal swivel mount to allow easy
installation on any Custom Project.Available
in the 19-LED “Target” design or 13-LED
“Star” design with red or amber lenses, clear
lenses must be ordered separately. Lenses
and LED boards are also separately available
as replacement parts and are also ideal
when you want to make a special Custom
application. Bullet lights and replacement
lenses are sold in sets of 2, all other
replacement parts are sold each.
Universal 1 5/8” LED Bullet
lights, sold per 2
731369 Target design, red
731370 Target design, amber
731371 Star design, red
731372 Star design, amber
LED 2 1/4" CHROME BEACON
BULLET LIGHTS
These die-cast and Chrome-plated Bullet
lights are something brand new.They feature
LED (Light Emitting Diodes) lights instead of
ordinary bulbs. Available in your choice of
stock Harley mount, using the OEM turn
signal or passing light bar and
OEM hardware, or universal mount that
comes with a Chromed steel 3/8” UNC
shouldered mounting post that allows the
wires to be routed through. Both Stock
Mount and Universal Mount Bullet lights are
available in the 40-LED “Target” design or
15-LED “Star” design and can be used as
Single or Dual beam. Lenses and LED boards
are also separately available as replacement
parts and are also ideal when you want to
make a special Custom application. Bullet
lights and replacement lenses are sold in
sets of 2, all other replacement parts are sold
each.
Universal Mount LED Bullet
lights, sold per 2
731352 Target design, red
731353 Target design, amber
731354 Star design, red
731355 Star design, amber
Stock Harley Mount LED Bullet
Lights, sold per 2
731356 Target design, red
731357 Target design, amber
731358 Star design, red
731359 Star design, amber
HI-GLIDE BULLET STYLE LED
MARKER LIGHTS
Hi-Glide bullet marker lights feature
15 bright amber shining LED’s. Lights
are 2 3/4” (7 cm) long, 1 1/2” (4 cm) in
diameter and have 3/4” (2 cm) long
M10 x 1.25 mounting stud. Total width is
2 3/8” (6 cm). Available with or amber and
a clear lens. Both versions are EU approved,
come pre-wired and are sold each.
160920 With amber lens
160922 With clear lens
04-010
Replacement parts
731373 Set of 2 clear lenses
731374 Set of 2 red lenses
731375 Set of 2 amber lenses
731379 Target-board, red
731380 Target-board, amber
731381 Star design LED board, red
Replacement parts
731360 Red lenses, pair
731361 Amber lenses, pair
731365 Red LED board, Star Design
731366 Amber LED board, Star Design
731367 Red LED board, Target Design
731368 Amber LED board, Target
Design
10300002_ZOD_H04_UK_11
1-9-2010
17:35
Pagina 011
Marker Lights & Fender Lights
04
FENDER LIGHT
Perfect reproduction of the early fifties
fender light. Features 12 Volt bulb and
wiring. Die-cast construction, will fit most
fenders. Available with clear or amber lens.
160065 Fender light with amber lens
(OEM 68450-49A)
160067 Fender light with clear lens
(OEM 68455-49W)
EAGLE’S HEAD FENDER
ORNAMENT WITH LIGHT
Die-cast Eagle’s head fender ornament with
or without integrated light for lightning eyes
of the Eagle’s head. Will give a perfect
finishing touch on your front fender.
Available in Chrome only and gold/Chrome
finish.The gold on the gold accented version
is real 24 carat gold.
090221 Chrome finish, with light
090222 Gold/Chrome finish, with light
090219 Chrome finish, without light
090220 Gold/Chrome finish without
light
FENDER LIGHT "OLD STYLE"
An excellent reproduction of the "Old Style"
fender light. Show-Chromed die-cast
construction with concealed mounting bolts.
Fender light comes complete with amber or
clear lens and 12 Volt bulb.
162034 Fender light with amber lens
165138 Fender light with clear lens
165140 Clear lens only
INDIAN HEAD LIGHTED FENDER
ORNAMENTS
These 8" (20 cm) long, die-cast Indian Head
fender ornaments feature a chrome or gold
& chrome finish, concealed mounting and a
lighted face. They come pre-wired and
complete with mounting hardware and
12 Volt bulb.
160343 Gold & Chrome finish
160347 Chrome
LIGHTED FENDER TIPS
Replacement front and rear fender tips
complete with 12 Volt bulb. Fits FL models
1980 thru 1984, FLT and FLST models
1980 to present. Available with amber or
red lens.
090186 Front fender tip with amber lens
(OEM 59082-79)
090187 Rear fender tip with red lens
(OEM 59658-79)
090145 Amber replacement lens
090147 Red replacement lens
"BAD GUYS" SKULL FENDER
ORNAMENTS
Dress-up your front fender with these skull
fender ornaments.Available with or without
lighted eyes, Chrome or gold plated Skull
and your choice of green or red eyes.
A. Large ornament
090253 Skull fender ornament,
gold/Chrome, with red lights
INDICATOR LIGHTS
"Easy mount" EU-approved indicator lights
with expander type mounting for quick fit
inside the end of your handlebars.Available
for both 7/8" and 1" handlebars. Lights
come in sets of 2 with a Chrome finish and
amber lenses. EU-approved lenses are
separately available.
162245 Fits most 7/8" handlebars
162272 Fits most 1" handlebars
162103 Replacement lens, sold each
237108 EU approved lens, sold each
B. Medium ornaments
090239 Chrome with red eyes
090240 Gold with red eyes
090241 Chrome with green eyes
090243 Chrome with red eyes and light
04-011
10300002_ZOD_H04_UK_12
1-9-2010
17:38
Pagina 012
Turn Signals
04
RBS GRIPSETS WITH TURNSIGNALS
Manufactured by RBS from billet aluminum.
These stylish handlebar grips feature state
of the art bright shining "Built-In" turn
signals with EU approved LED lights. Fits all
models 1973 to present except those with
handlebar air reservoirs. They come in four
different styles and are available in polished
aluminum, chrome plated or black coated.
Standard grip set with LED turn
signals
722486 Polished aluminum
722487 Chrome plated
722488 Black coated
V-Style grip set with LED turn
signals
722489 Polished aluminum
722490 Chrome plated
722491 Black coated
Twister-style grip set with LED
turn signals
722492 Polished aluminum
722493 Chrome plated
722494 Black coated
Grooved-style grip set with LED
turn signals
722495 Polished aluminum
722496 Chrome plated
722497 Black coated
04-012
RBS BILLET TURN SIGNAL SET
These high quality turn signals are machined
from Billet aluminum and feature EU
approved lenses. Dimensions are 2 3/4"
long and 1 7/8" in diameter.These sets work
with any stock or stock style flasher unit.
Available in polished, Chrome-plated or
black anodized. When using a 3 1/2 or
5 Gallon tank fork stops must be mounted.
Turn signals are available in sets of 2 for
front application, sets of 2 for rear
application, and full sets with front and rear
turn signals.When you want to use just front
or rear turn signals you have to install two
Special Load Equalizing resistors, otherwise
your turn signals won't blink any longer.
Set of 2, Front
721929 Black anodized
Set of 2, Rear
721931 Chrome plated
721932 Black anodized
Set of 4, 2 Front & 2 Rear
700622 Polished
700623 Chrome plated
700624 Black anodized
Optional & replacement parts
721933 Load equalizing resistor, each
700589 Replacement halogen bulbs
12 Volt/21 Watt
FLH STYLE TURN SIGNALS
Replacement turn signals for all FLH model
1970 thru 1992. Heavy-Duty, Chromeplated die-cast construction.Available with
red or amber lens and your choice of singleor dual filament bulb. Dual filament bulb
type indicators are usually used to have a
combination of running lights and turn
signal.
Fits FLH models 1970 thru 1983
165039 With amber lens and single
filament bulb
(OEM 68557-70A)
160272 With amber lens and dual
filament bulb
(OEM 68552-70A)
160271 With red lens and dual filament
bulb
165041 Amber replacement lens
(OEM 68571-63A)
160401 Red replacement lens
Fits FLH models 1984 thru 1992
160264 With amber lens and single
filament bulb (OEM 68402-86)
160263 With amber lens and dual
filament bulb
160400 Amber replacement lens
(OEM 68440-86)
10300002_ZOD_H04_UK_13
1-9-2010
17:41
Pagina 013
Turn Signals
04
DEUCE STYLE TURN SIGNAL
LENSES
The new Bullet turn signals were introduced
back in 2000 on the Softail Deuce.
Meanwhile they are OEM equipment on
more models. Zodiac has replacement lenses
available in Amber, but for those who want
to add something extra we have them also
in clear, red or smoke. Fits Sportster and
Dyna models 2002 to present, and Softail
2000 to present, except FLSTC. Available
with honeycomb pattern or E-approved
plain amber. Lenses are sold each.
Honeycomb pattern
163062 Amber (OEM 68973-00 &
68907-00)
163061 Clear
163063 Red
163064 Smoke
Plain
162353 Amber, E-approved
(OEM 68907-00 & 68973-00)
KELLERMANN EU APPROVED
MICRO TURN SIGNALS
Great looking, but in fact the smallest turn
signals on the market today. They measure
only 2 5/8" long, including the stem, and
are only 5/8" high. Come with EU approved
lenses and are TÜV approved for use as rear
turn signal. Available in your choice of
chrome plated, satin or black epoxy coated
with Halogen bulb or state of the art LED
lighting. There is even a "Stealth" version
with a black housing and ultra dark lens,
dark as the night but super bright when
working. Turn signals are pre-wired, come
complete with bulb or LED and are sold
each.
With Halogen bulb and amber
lens
731537 Black
731538 Chrome
731539 Satin
741550 Replacement lens, sold each
741553 Replacement bulb, sold each
TURN SIGNAL LIGHT
165043 Fits FX and XL 1973 thru
1986 (OEM 68514-73)
165045 Replacement lens only
(OEM 68483-73)
160063 Fits 1986 thru 1994 FX(R)
models (OEM 68404-86)
160223 Replacement lens only
(OEM 68457-86)
With amber LED and white lens
741555 Black
741556 Chrome
741557 Satin
"Stealth" with amber LED and
dark lens
741729
Black
With white LED and amber lens
741559 Black
741558 Chrome
741560 Satin
KELLERMANN EU APPROVED
MICRO RHOMBUS TURN SIGNALS
Micro Rhombus turn signals are waterproof
and feature LED lighting and a "LonglifeProtection-Guard- Electronics" circuit.
Micro-sized metal body only measures 3"
(7.5 cm) long, 3/4" (2 cm) high, and 1"
(2.5 cm) deep. Transparent lens is EU
approved for front and rear use. Standard
fixation in 8 mm drilled holes. Available in
chromed, black anodized or polished.There
is even a "Stealth" version with a black
housing and ultra dark lens, dark as the
night but super bright when working. Sold
each.
741720 Chrome, front/left or rear/ right
741721 Chrome, front/right or rear/ left
741722 Black, front/left or rear/right
741723 Black, front/right or rear/left
742028
Stealth, black with dark
lens, front/left or rear/right
742029
Stealth, black with dark
lens, front/right or rear/left
741724 Polished, front/left or rear/ right
741725 Polished, front/right or rear/ left
04-013
10300002_ZOD_H04_UK_14
1-9-2010
17:43
Pagina 014
Turn Signals
04
KELLERMANN INDICATORS
Kellermann’s stud mounted turn signals feature TÜV and EU approved
white lenses, a 12 Volt 21 Watt amber halogen bulb and
M10x1.25x20 stud mounts. Available in chrome plated or black
powder coated steel, as well as satin finish Stainless Steel. A perfect
match with Kellermann’s handlebar mounted indicators. Sold each.
741566 Chrome finish steel
741564 Satin finish stainless steel
741565 Black finish steel
KELLERMANN MICRO 1000DF TURN/TAIL LIGHTS
This innovative combination of turn signals with integrated taillight
function is now united in the Micro 1000 housing.The Micro 1000 DF
is the result of constant optimizations & further developments of the
Kellermann Micro 1000 LED series. Due to the integration of the
taillight functions in the turn signals you do not need a taillight in the
center of the bike anymore. This will give your bike a totally new
appearance. The Micro 1000 DF in the beautiful steel housing of the
Micro1000 replaces turn signals and the taillight and now allows
you to try out something completely new when customizing your
bike. Depending on your model it may be required to use an electronic
turn signal flasher unit such as the ZPN 237304 or a Load Equalizer
module like the ZPN 238380 in order to retain the original flashing
sequence of the turn signals and control lights. Micro 1000 DF / turn
signal/taillight combinations are EU-approved for the rear, no need
for TÜV-approval, replaces the brake light, running light and turn
signals. They feature Kellermann's High Power LED-Technology with
a current draw of only 1 Watt for taillight and 1 Watt for brake light.
These LED's are built into a high quality steel housing. Unit measures
approx. 72 mm length (w/o thread), 18 mm height and 17 mm depth,
with a lens size of only 44 mm x 15,5 mm. These turn/tail lights have
replaceable M8- threaded anti-vibration adapters which protect from
damage due to vibrations or vandalism. Sold each in chrome, satin
chrome and black.
741726 Chrome
741728 Satin Chrome
741727 Black
04-014
KELLERMANN HANDLEBAR VIBRATION DAMPER &
INDICATORS
These handlebar mounted indicators are the ultimate form-followsfunction design as they help to reduce handlebar vibrations. They fit
all handlebars with internal diameters from 11.5 mm thru 24 mm
and feature TÜV and EU approved lenses and a 12 Volt/21 Watt
halogen bulb. Available in chrome plated or black powder coated
steel, satin or polished finish Stainless Steel, as well as black anodized,
machined or polished aluminum. Due to their reduced weight, the
aluminum version gives less vibration damping. These handlebar
vibration damper/indicators are sold each. Order two pieces to
complete one motorcycle.
With amber lenses
731530 Chrome plated brass
731533 Black powder coated brass
731532 Satin finish Stainless Steel
731531 Polished finish Stainless Steel
731534 Machined finish aluminum
731535 Polished finish aluminum
731536 Black anodized aluminum
741551 Replacement amber lens front, sold each
741552 Replacement amber lens rear, sold each
741554 Replacement bulb, sold each
With clear lenses
741563 Chrome finish steel
741561 Satin finish Stainless Steel
741562 Black finish steel
HOT SPOT INDICATOR LIGHTS
Hot Spot chrome indicator lights feature streamlined, winged looks.
They are only 15/16” (24 mm) in diameter, have an 3 1/2” (89 mm)
over all length, 3” (76 mm) long base and are 1 1/4” (32 mm) wide.
Hot Spot indicator lights come pre-wired and complete with mounting
studs. Sold in sets of 2.
160736 Hot Spot indicator lights
10300002_ZOD_H04_UK_15
1-9-2010
17:46
Pagina 015
Turn Signals
SIDE MOUNT TURN SIGNALS
You can flush mount these Billet side mount
turn signals to any flat surface to achieve a
Custom look. Single filament operation
packed and sold per pair. Measures
1" x 2" x 3 3/4".
237755 Side Mount turn signals, pair
Chromed
237816 Replacement bulb 10 Watt,
with socket and wire
04
NEW STYLE BULLET MARKER
LIGHTS
Our latest design Bullet Marker lights.
Available in Smooth or Grooved. Both
versions are pre wired, complete with
12 Volt 21 Watt bulb, and amber acrylic lens.
Measures 2 3/8” (60 mm) round and
3 3/8” (86 mm) long. Easy to mount as these
lights have a 5/16” UNC threaded mount.
Lights are TÜV/EU approved. Sold each.
162371 Grooved New Style Bullet
marker light
162369 Smooth New Style Bullet
marker light
162353 Amber replacement lens
(OEM 68973-00)
SIGNAL COVERS BY PRO-ONE
Make your stock turn signals look like a
million bucks. Simply install a set of Pro-One
Billet turn signal covers. They are machined
from solid Billet and Chrome-plated to a
mirror finish. Packed and sold per pair,
includes Chrome mounting screws.
Fits FL models up to 1985, front
237834 Includes red and amber lenses,
pair
Fits FL models up to 1985, rear
237844 Includes red and amber lenses,
pair
CENTER MOUNT TURN SIGNAL
These center mount turn signals are
designed for Custom applications and come
with a center-mounting stud. Machined from
solid Billet aluminum. Single filament
operation. Measures 1" x 2" x 3 3/4".
Packed and sold per pair.
237756 Chrome with amber lens (pair)
237816 Replacement bulb 10 Watt,
with socket and wire
Note: A load Equalizer (ZPN 237331 or
238331) is required when replacing stock
signals on 1991 to present models with self
canceling system.
PRO-ONE VIPER TURN SIGNALS
Pro-One’s incredible Viper Turn Signals are
the ultimate in Custom styling. Machined
from solid Billet aluminum. These universal
Chrome-plated side mount turn signals
feature dual filament operation and include
a set of amber and red lenses. There is
nothing else like them, fits most models.
Measurements: 1 1/2” x 6”.
237944 Viper Turn Signals (pair)
CHROME TURN SIGNAL TRIM
RINGS
The perfect "touch of class" for most early
and late-style turn signals. Made of Chromeplated stamped steel. These easy-to-install
trim rings fit on either OEM or aftermarket
turn signals. Sold in pairs.
160219 Early style, fits all FX, FXR and
Sportster models (except FXRT)
front and rear turn signals from
1973 thru 1985 (OEM 6774190T)
160220 Late style, fits Sportster, FX, FXR
(except FXRT), and Dyna
models, as well as FLST, FLSTF
and FLSTN models from
1986 thru 2001 (OEM 6773990T)
CHROME-PLATED DIE-CAST TURN
SIGNAL VISORS
These unique design visors wrap around the
front or rear turn signals on all 1986 thru
2001 Sportster, FXR, Dyna and Softail
models except FLST and FXRT models. Sold
in pairs and come complete with mounting
hardware.
160387 Turn signal visors
04-015
10300002_ZOD_H04_UK_16
1-9-2010
17:49
Pagina 016
Turn Signal Trim Rings & LED Turn Signals
CHROME-PLATED DIE-CAST TURN
SIGNAL VISORS
The four mounting bosses are at right angles
to each other permitting the installation of
the visors to the stock housings in
90 degrees increments. They fit any models
from 1986 thru 2001 with the original flat
turn signal lenses. Sold in pairs.
160247 Die-cast turnsignal visors
04
SLOTTED CHROME TRIM RINGS
The Chrome-plated turn signal trim rings fit
both OEM and aftermarket turn signals. Easy
to install on most XL, FX and FXR models.
Available for both early and late style turn
signals. Sold in pairs.
160248 Fits all Sportster and FX/FXR
models (except FXRT) front and
rear 1973 thru 1985
160249 Fits all Sportster, FX/FXR models
(except FXRT), FLST, FLSTF Fat
Boy and FXDB Dyna Glide
models 1986 thru 2001
TURN SIGNAL TRIM RINGS
These superb looking trim rings are made
from Chrome-plated stamped steel and
include Chrome mounting hardware. They
fit all Original Equipment and aftermarket
turn signals.Available for both early and late
model flat lenses fitted to the turn signal
assemblies on most “Dresser” models from
1963 to present. Sold as set.
160244 Early style, fits FLH or FLT and
FLHT models from 1963 thru
1985
160245 Late style, fits FXRD, FXRT, FLT,
FLHT, FLHS, Road King and all
Heritage Softail models from
1986 thru 2001
LED TURN SIGNAL UPGRADE KITS
Change your stock Harley turn signals into
something brand new and very exciting.
These LED (Light Emitting Diodes) Turn
Signal Upgrade Kits are very easy to install
with no more tools than a screwdriver. Kits
come with a see-through flat lens to show
the LED’s, which are available in “Target”,
“Galaxy” and “Hexagon” pattern. There
are a number of different style kits
available, one to fit OEM turn signals with
the 3 1/4” diameter flat housing, the other
to fit the OEM 3” diameter football style
housing. Every kit contains two LED panels
and two lenses. Dual Beam kits contain two
LED panels and two lenses are turn
signal/running light combinations and are
available in amber, Single Beam kits replace
single filament turn signals in your choice
of amber or red.LED turn signal upgrade
kits for 3 1/4" diameter OEM Flat Style turn
signals Target design
LED turn signal upgrade kits for
3 1/4” diameter OEM Flat Style
turn signals on 1986 to present
Touring and Heritage Softail
Target design
731383 Amber, Dual Beam
731385 Amber, Single Beam
731387 Red, Single Beam
04-016
Galaxy design
731389 Amber, Dual Beam
731391 Amber, Single Beam
731393 Red, Single Beam
Hexagon design
731395 Amber, Dual Beam
731397 Amber, Single Beam
731399 Red, Single Beam
LED turn signal upgrade kits for
3” diameter OEM Football style
turn signals on 1986 thru 2001
Sportster, FXR, Dyna and Softail
(except Heritage)
Target design
731384 Amber, Dual Beam
731386 Amber, Single Beam
731388 Red, Single Beam
Galaxy design
731390 Amber, Dual Beam
731392 Amber, Single Beam
731394 Red, Single Beam
Hexagon design
731396 Amber, Dual Beam
731398 Amber, Single Beam
731408 Red, Single Beam
10300002_ZOD_H04_UK_17
1-9-2010
17:52
Pagina 017
Turn Signal Lenses
CUSTOM TURN SIGNAL LENSES
These custom turn signal lenses are sold in
sets of 2 for front and/or rear applications.
Most lens kits are available in Red, Amber,
Smoke or Clear. First determine what turn
signals you have and than pick your style
and color.
04
Pop-up style
Lenses are 60 mm (2.36”) in diameter and
are clicked onto the turn signal body. Fits
the stock turn signals on 2002 to present
Sportster, 2001 to present FXDX, 2002 to
present Dyna, 2000 thru 2007 Softail Deuce,
2002 to present Softail, 2002 to present
Road Glide and 2004 Road King Custom.
Also fits V-Rod models equipped with
OEM accessory chrome turn signal kits
(OEM 69374-05 or OEM 69065-05).
FLH style
Lenses are 83 mm (3.27”) in diameter. Fits
the stock turn signals on 1986 to present
FLH/FLT series models and Heritage Softails.
Hi-Hat style
Lenses are 78 mm (3.07”) in diameter. Fits
the stock turn signals on 1986 thru
2001 Sportster, FXR, Dyna and Softail
models (except Heritage Softail).
Smoke Bullet lens kits
Come complete with dual filament amber
glass bulbs for front applications, and
single filament amber glass bulbs for rear
applications.
723343 Pop-up style Rear
723344 Pop-up style Front
723347 Hi-hat style Rear
723348 Hi-hat style Front
723351 FLH style Rear
723352 FLH style Front
Chrome Skull lens kits
FLH style lenses are available with vertical
mount for rear applications and horizontal
mount for front applications.
Red
Amber
723329 723330 Pop-up style
723333 723334 Hi-Hat style rear
N/A
723335 Hi-Hat style front
723338 723339 FLH style rear
N/A
723340 FHL style front
Deco Bullet lens kits
Red
Amber
723312 723313 FLH-style
Chrome Maltese Cross lens kits
Red
Amber
723331 723332 Pop-up style
723336 723337 Hi-hat style
723341 723342 FLH style
Bullet lens kits
Red
Amber
723303 723304
723306 723307
723309 723310
Clear
723305 Pop-up style
723308 Hi-Hat style
723311 FLH-style
Aluminum Finned Bullet lenses
Red
Amber Smoke Clear
723356 723355 723358 723357
Pop-up style
Flame Bullet lens kits
“Bra” flames come from the top of the
lens and are usually used in front
applications, “Campfire” flames arise
from the bottom of the lens and are
usually used in rear applications.
Red
Amber Smoke Clear
723314 723315 723345 723317
Campfire Flame Pop-up style
723319 723320 723349 723322
Campfire Flame Hi-Hat style
723324 723325 723353 723327
Campfire Flame FLH style
N/A
723316 723346 723318
Bra Flame Pop-up style
N/A
723321 723350 723323
Bra Flame Hi-Hat style
N/A
723326 723354 723328
Bra Flame FLH style
04-017
10300002_ZOD_H04_UK_18
1-9-2010
17:55
Pagina 018
LED Turn Signals/LED Lights & LED Bulbs
04
LED BULLET MARKER LIGHTS
Chrome-plated Bullet marker lights are prewired and available with red or amber lens
in Single or Duplex. Duplex can be used as
a combined turn signal and running light.
Usable for many Custom applications and
sold each.
162331 Red, single LED’s
162333 Red, duplex LED’s
162337 Amber, duplex LED’s
LED MINI MARKER LIGHTS
Chrome-plated die-cast LED Mini marker
lights are only 1 3/4” (45 mm) wide,
1 3/4” (45 mm) deep and 1 1/2” (40 mm)
tall. They are pre-wired and feature bright
LED’s and amber lens. Sold each.
162324 Amber LED Mini Marker Light
LED TURN SIGNALS
These Chrome-plated LED turn signals are
a bolt-on stock replacement. FL style fits
FXRD, FXRT, FLH, FLT and all Heritage Softail
models 1986 to present, FX style fits
Sportster, FX, FXR (except FXRT), Dyna, FLST,
FLSTF and FLSTN models 1986 thru 2001.
These turn signals are pre-wired for Duplex
use, so you can use them as running light
and turn signal combination or connect both
the turn signal wire and running light wire
to the turn signal wire on your bike. Sold
each.
162323 FL style turn signal, fits 1986 to
present
162320 FX style turn signal, fits1986
thru 2001
LATE-MODEL TURN SIGNAL
VISORS
A version of our popular turn signal visors
which will fit the late-style front housings
on most “Dresser” and Heritage Softail
models from 1986 to present
(OEM 67734-88T). Sold in pairs.
160225 Turn signal visor
LATE-MODEL TURN SIGNAL
VISOR
Another version of the ever popular turn
signal visors which fits the late-style front
housing of FLT 1988 to present and the rear
of all FLT, FLHT, FLHTC, FLHS, Road King,
FLST(C), FXRD and FXRT models from
1986 thru 2001 (OEM 67737-88T).
160226 Turn signal visor
LED BULBS
Bright shining 12 Volt LED replacement
bulbs. Available in Bright Red that can be
used to replace almost any taillight or
running light bulb and Bright Amber that
can be used to replace turn signal light
bulbs. Bulbs have a thick socket (BA15) and
give a very special light effect. LED lights
use only a fraction of the power normal
bulbs do. Both Red and Amber bulb are
available in single or dual filament.
12 Volt Red LED bulbs
166030 Single filament (10 Pack)
751530 Single filament (each)
166031 Dual filament (10 Pack)
751531 Dual filament (10 Pack)
12 Volt Amber LED bulbs
166032 Single filament (10 Pack)
751532 Single filament (each)
166033 Dual filament (10 Pack)
751533 Dual filament (each)
MINI LED MARKER LIGHT
Multicolored LED’s (red/white/blue) in a
compact chrome housing, can be used as
accent light or as auxiliary turn lights. To be
installed either with two screws or two-sided
tape, depending on the application. Housing
measures only 3/4” high, 1 1/2” wide and
1/2” deep. Sold each.
165238 Mini marker light
RED/WHITE/BLUE LED'S
04-018
TURN SIGNAL VISOR SET
Turn signal visor set for FL models from
1963 thru 1985 (OEM 67786-86T).
160208 Turn Signal visor set
10300002_ZOD_H04_UK_19
1-9-2010
17:58
Pagina 019
LED Lights & LED Bulbs
04
PAUL YAFFE'S BAGGER NATION
SPADE BAG LIGHTS
Super bright LED's that function as taillight,
turn signals and strobing brake lights.
Increase your visibility over 50% while
making your Bagger look 100% cooler.
Machined from 6061 T6 billet then
beautifully chrome plated. When you want
to take things a step further the Frenchy
boxes will just do. CNC machined from ABS
these little guys will make quick work out of
frenching your Spade Bag Lights into your
saddlebags for that truly custom hot rod
look! Just cut a hole for the french box in
your saddlebag, epoxy the boxes in from the
inside, sand the lip down to match the bag
and a little body work and you've got the
trickest taillights in town. Lights are sold
each, Frenchy boxes are sold in pairs.
745011 Spade Light, each
745013 Spade Frenchy boxes, pair
PAUL YAFFE'S BAGGER NATION
WEDGY BAG LIGHTS
Super bright LED's that function as taillight,
turn signals and strobing brake lights.
Increase your visibility over 50% while
making your Bagger look 100% cooler.
Machined from 6061 T6 billet then
beautifully chrome plated. Simple bolt-on
installation. When you want to take things
a step further the Frenchy boxes will just do.
CNC machined from ABS these little guys
will make quick work out of frenching your
Wedgy Bag Lights into your saddlebags for
that truly custom hot rod look! Just cut a
hole for the french box in your saddlebag,
epoxy the boxes in from the inside, sand the
lip down to match the bag and a little body
work and you've got the trickest taillights in
town. Lights and Frenchy boxes are sold in
pairs.
745009 Wedgy Lights, Left and right
745014 Wedgy Frenchy boxes, pair
PAUL YAFFE'S BAGGER NATION
"THE ANSWER BAG" LIGHTS
Paul Yaffe introduced these super slick flush
mount saddlebag lights years ago, but they
are still one of the coolest taillight
conversions around.These oval LED bolt-ins
work as brake lights, taillights, and turn
signals. All you need is a hole and a
screwdriver and these babies are installed.
They feature satin aluminum billet bezels
that are designed for a flawless flush mount
installation. They can be lit with the outer
ring, center ring, or both at the same time.
This allows for many turn signal and brake
light combinations. Works great in hard
saddlebags, fenders or custom applications.
Each is sold with all mounting hardware
included. So if you want to shave your
bagger fender, or you just want to have tons
of LED lights covering your ass, it's in the
bag.
745012 The Answer oval LED light
04-019
10300002_ZOD_H04_UK_20
1-9-2010
18:01
Pagina 020
LED Lights & LED Bulbs
F. Single
360 Degree bulbs
with 18 LED's,
single filament
167452 Clear
167454 Red
167456 Amber
04
G. Single RSL1 bulbs with 1 LED,
single filament
167405 Clear
167413 Red
167421 Amber
H. Single CPR1 bulbs with 1 LED,
single filament
167407 Clear
167415 Red
167423 Amber
LED BULBS
Now you can convert almost any taillight,
turn signal, marker light and numerous
other armature from old style incandescent
into state of the art bright shining LED.
These LED conversion "bulbs" simply
replace the bulb, and that is it! No
electronics to install as everything needed
is build into the socket. LED lights use only
a fraction of the power normal bulbs do and
live much, much longer. These 12 Volt LED
replacement bulbs have a normal
BA15 socket. BA15S versions are to replace
single filament bulbs, whereas BA15D
version are to replace dual filament bulbs,
usually found in stop/taillight combinations
and turn signal/running light applications.
Available in clear, red and amber. Red and
amber LED's are great when used in
combination with clear or smoke lenses.
Sold each.
Note: When used to replace turn signal
bulbs the installation of a Load Equalizer or
electronic turn signal relay may be required.
04-020
A. Single cluster
bulbs with
12 LED's, single
filament
167482 Clear
167484 Red
167486 Amber
I. Single FPR1 bulbs with 1 LED,
single filament
167408 Clear
167416 Red
167424 Amber
B. Single cluster
bulbs with
19 LED's, single
filament
167492 Clear
167494 Red
167496 Amber
J. Single FM3 bulbs with 1 LED,
single filament
167406 Clear
167414 Red
167422 Amber
C. Single compact
LED bulb, single
filament
167442 Clear
167444 Red
167446 Amber
K. Dual Cluster
bulbs with
12 LED's, dual
filament
167481 Clear
167483 Red
167485 Amber
D. Single
360 Degree bulbs
with 13 LED's,
single filament
167462 Clear
167464 Red
167466 Amber
L. Dual Cluster
bulbs with
19 LED's, dual
filament
167491 Clear
167493 Red
167495 Amber
E. Single
360 Degree bulbs
with 15 LED's,
single filament
167472 Clear
167474 Red
167476 Amber
M. Dual Compact
LED bulbs, dual
filament
167441 Clear
167443 Red
167445 Amber
10300002_ZOD_H04_UK_21
1-9-2010
18:05
Pagina 021
LED Bulbs & Turn Signal Brackets
N. Dual 360 Degree
bulbs with
13 LED's, dual
filament
167461 Clear
167463 Red
167465 Amber
04
O. Dual 360 Degree
bulbs with15 LED's,
dual filament
167471 Clear
167473 Red
167475 Amber
P. Dual 360 Degree
bulbs with
18 LED's, dual
filament
167451 Clear
167453 Red
167455 Amber
Q. Dual RSL bulbs
with 1 LED, dual
filament
167401 Clear
167409 Red
167417 Amber
R. Dual CPR bulbs
with 1 LED, dual
filament
167403 Clear
167411 Red
167419 Amber
E-APPROVED ADHESIVE
REFLECTORS
Mandatory or accessory, these reflectors are
DOT and "E" approved and easy to install.
Available in red or amber in various shapes
and sizes.
Amber reflectors
160521 Round, 2.36" (60 mm)
160684 Elliptical, 3.75" x 1.3"
(95 x 33 mm)
160685 Big Rectangular, 3.6" x 1.4"
(92 x 36 mm)
160687 Small Rectangular, 3.7" x 1"
(94 x 26 mm)
160689 Oval, 4" x 1" (100 x 26 mm)
Red reflectors
160520 Round, 2.36" (60 mm)
160686 Big Rectangular, 3.75" x 1.3"
(92 x 36 mm)
160688 Small Rectangular, 3.6" x 1.4"
(94 x 26 mm)
160690 Oval, 4" x 1" (100 x 26 mm)
TURN SIGNAL MOUNTING
BRACKET
Everything necessary for installing ZPN
165039, 160271 or 160272 turn signal
assemblies on the front of FL models from
1968 thru 1992. The universal mounting
clamp permits installation on a variety of
motorcycles.
345158 Complete kit, set of two
(OEM 68518-68)
345163 Standoff only, sold each
(OEM 68519-68)
345164 Clamp only, sold each
(OEM 68795-68)
TURN SIGNAL MOUNT KIT
This chrome plated kit allows you to mount
the front turn signals horizontally to the
handlebar controls. Contains right and left
bracket with swivel adjustment. Fits models
equipped with handlebar mounted bullet
style turn signals. All hardware included.
162113 Turn signal mount kit
S. Dual FPR bulbs
with 1 LED, dual
filament
167404 Clear
167412 Red
167420 Amber
T. Dual FM3 bulbs
with 3 LED's, dual
filament
167402 Clear
167410 Red
167418 Amber
FRONT TURN SIGNAL SUPPORT
Chrome-plated front turn signal support. Fits
FXRS, FXLR and Dyna Glide models
1987 thru 2000 (OEM 68555-87).
162273 Front turn signal support
F OR A RLEN N ESS
PRODUCTS
SEE SECTION
25
04-021
10300002_ZOD_H04_UK_22
1-9-2010
18:09
Pagina 022
Turn Signal Brackets & Flasher Units
04
CHROME TURNSIGNAL SWIVEL
KIT
Chrome plated version of the stock zinc
plated front turn signal swivels as used on
all Sportster models 1988 thru 2003,
1988 thru 1993 FXR's, 1991 to present
Dyna's, 1988 to present FXST Softails
(except 2003 FXSTDSE), and 1997 thru
2003 FLST Softails. Will not work with
OEM turn signal relocation kits. Sold in sets
of 2 (OEM 68185-00).
160469 Chrome turn signal swivel kit
THREE PIECE CLAMP
This unique clamp makes mounting
everything from headlight to seat, foot peg
to spotlight an easy job. Chrome-plated
finish. Available in three sizes.
161140 1" (OEM 50904-85T)
161146 1 1/8" (OEM 50905-85T)
161141 1 1/4" (OEM 50903-85T)
TURN SIGNAL THREADED STUDS
Chrome-plated, threaded studs to mount
rear turn signals. Available in two lengths,
one as an OEM replacement, the other is
1/2” shorter to bring the turn signals closer
to the bike.
346183 Threaded stud, (68493-87)
346184 Threaded stud, 1/2" shorter
04-022
FRONT TURN SIGNAL
RELOCATION BRACKETS
These relocation brackets feature die-cast
construction and beautiful Chrome-plating.
They permit you to move your turn signals
from below your mirrors to the spring
reaction bracket screws on the sides of your
front end. Fits all Springer Softail models
from late 1988 to present and comes
complete with hardware.
160262 Bracket set
TURN SIGNAL FLASHER UNIT
Extra Heavy-Duty flasher unit, built to
stringent Accel specifications. Fits all models
XL, FX, FX, FLT, FXR 1965 to present
(OEM 68543-64B).
231934 Turn signal flasher unit
ELECTRONIC TURN SIGNAL
FLASHER
These electronic flasher units are a must
when using aftermarket indicator lights.This
unit takes over where the OEM unit gives up
and does not flash anymore. It will work with
any combination of indicators, mini markers,
whisker lights etc. with a power draw
minimum 10 Watt and a maximum of
200 Watt.
237304 Electronic turn signal flasher
REAR TURN SIGNAL MOUNTING
BRACKETS
These turn signal brackets make it possible
to mount the lights almost directly at the
rear of the bike. The brackets stand out half
an inch and therefore give a much slender
appearance than the stock mounting bar.
They have a chrome-plated finish. Fits all
4 speed FL models from 1974 thru 1984,
FLSTC models from 1986 to present, as well
as FLT, FLHT, FLHS and FLHR models from
1991 to present.
162115 Rear turn signal bracket set
BADLANDS TURN SIGNAL
COMMAND KIT
Badlands' new Turn Signal Command Kit
allows you to activate your turn signals by
just pushing the button once, NOT holding
it down. Your turn signals will flash
approximately 9 seconds, with the option to
cancel manually. If more time is required you
simply reactivate the system by pushing the
button again. Badlands' Command Kit
features a built-in flasher relay, and built-in
Load Equalizer to operate turn signals from
as low as LED's to up-to 100 Watts per side,
as well as an integrated Emergency Flasher.
So when you are tired of struggling to hold
in your turn signal button, pull in your clutch,
operate your throttle an apply your front
brake all while making a turn, then the
Command Kit is the answer.
237333 Turn signal command kit
10300002_ZOD_H04_UK_23
1-9-2010
18:13
Pagina 023
Turn Signal Brackets & Flasher Units
UNIVERSAL RELAY
A Bosch style relay for 12 Volt systems. Can
be used for many applications, for example
to control your headlight with a single wire
and a push button switch. Capable to switch
up to 40 Amps.
151115 12 Volt universal relay
04
HEADLIGHT SWITCH RELAY
This headlight relay is a favorite among
Custom bike builders. It allows the control
of Hi-Lo beam with one wire to the
handlebar in combination with a horn-type
button, such as Ness “Petite” switches.
722005 Switch relay unit
PRO-ONE "MILLENNIUM"
CHROME BILLET TURN SIGNAL
BARS
These trick signal bars fit between the forks
and mount to the headlight mounting bolt.
Available to fit Wide Glide or Narrow Glide
front ends, these Chrome-plated units come
in Smooth and Ball Milled styles. Match
perfectly with Pro-One's “Millennium” Style
turn signals.
Fits Wide Glide forks
710906 Smooth Millennium Style
710907 Ball Milled Millennium Style
CHROME REAR TURN SIGNAL
MOUNTING BARS
These turn signal mounting bars are
available in shortened and stock
replacement versions. The shortened bars
are 4” narrower than the OEM bars and
make a significant change to the appearance
of your motorcycle.These stamped steel bars
are much stronger than the die-cast Original
Equipment ones.The steel construction also
provides a better base for the beautiful
Chrome plating.
Fits all 4 Speed models from
1974 thru 1984, Heritage Softail
models from 1986 to present as
well as FLT, FLHT, FLHS and Road
King models from 1991 to
present
160267 Shortened version
160268 Stock length (OEM 68510-74B)
Fits all FLT, FLHT and FLHS
models from 1985 thru 1990 and
FXRT and FXRD models from
1983 thru 1992
160269 Shortened version
160270 Stock length
(OEM's 68643-83B &
91778-85)
DIE-CAST REAR TURN SIGNAL
MOUNTING BAR
The casting of these bars have been
strengthened to make them more durable
than the stock OEM pieces. They are
available in stock replacement version as
well as a shortened version. The shortened
bars are 4” narrower than the OEM bars and
make a significant change to the appearance
of your motorcycle. Both versions are
available in either a polished or Chromeplated finish.
Fits all 4 speed FL models from
1974 thru 1984, FLSTC models
from 1986 to present, as well as
FLT, FLHT, FLHS and FLHR models
from 1991 to present
160332 Chrome - short
(OEM 68510-74B)
160333 Polished - short
(OEM 68510-74A)
160330 Chrome - standard
(OEM 68510-74B)
160331 Polished - standard
(OEM 68510-74A)
Fits Narrow Glide forks
710908 Smooth Millennium Style
710909 Ball Milled Millennium Style
WIRE PLUS AUTO-CANCEL LOAD
EQUALIZER FOR TURN SIGNALS
The Wire Plus Auto-Cancel Load Equalizer is
a turn signal module that is a must when
converting from your OEM turn signals to
marker lights or LED's that draw less current
as stock turn signals. This is where the Wire
Plus module kicks in.The module is equipped
with a load equalizer, which is exactly what
is needed to return the amp draw to the
correct level. Fits all models with self
cancelling turn signals.
731940 Wire Plus auto-cancel load
equalizer
Fits all FLT, FLHT and FLHS
models from 1985 thru 1990 and
FXRT and FXRD models from
1983 thru 1992
160334 Chrome - short
(OEM 91778-85)
160336 Polished - short
(OEM 68643-83B)
160335 Polished - standard
(OEM 68643-83B)
04-023
10300002_ZOD_H04_UK_24
1-9-2010
18:16
Pagina 024
Light Accessories
04
BADLANDS LOAD EQUALIZER
When installing aftermarket marker lights
as replacement for the stock turn signals on
Harley-Davidson which have a self canceling
system, the Load Equalizer must be used. It
will return amperage draw to correct factory
specification, as the self canceling Brain Box
must have the correct draw in order to
function properly. Both the Load Equalizer I
and II perform this function, while the Load
Equalizer II has the added feature of
allowing you to retain emergency flasher
capability. It has a built-in thermostat which
retains the resistors heat while your bike is
functioning in the emergency flasher mode.
Note: The load equalizer I and II units are
not designed to be used in parades or with
the bike running for an extended period of
time.The Load Equalizer III unit can be used
in this situation.
237331 Load Equalizer I, for self
canceling turn signals
238331 Load Equalizer II, for self
canceling turn signals and
emergency flasher function
238380 Load Equalizer III, for self
cancelling turn signals and
emergency flasher function,
works with OEM installed TSSM
security/alarm module
04-024
BADLANDS LOAD EQUALIZER III
Badlands developed this solid state Load
Equalizer III for Harley-Davidsons equipped
with the HFSM or TSSM security/alarm
module or the TSM turn signal module. This
module works great with the new
generation of Harley-Davidson modules and
is compatible with virtually any of the
custom turn signals available. Works great
with halogen and LED's too. Unlike others,
this module allows your security system to
work properly all the time. Badlands claims
that if you have a security light that does not
function correctly (stays on all the time) or
your turn signals are blinking erratically, this
module will solve any related problem. This
new solid state module also has solved the
problem of having to use ceramic resistors
that produce unwanted heat.This is the only
Load Equalizer designed for parade use, so
you can run emergency flashers for any
amount of time.
742850 Fits FLH models 1997 to
present, Softail models from
1996 to present including
Deuce, Dyna models from
1997 to present and XL models
from 1999 thru 2003. Does not
fit FXCW Rocker nor FXCWC
Rocker Custom
742851 Fits XL models from 2004 to
present
BADLANDS ILLUMINATOR
If you don’t want to be hit from the back
when braking but want to be seen at all
times you must install the Badlands
Illuminator. The Illuminator gives you two
extra taillights and two extra brake lights by
using your stock, or any custom turn signals
for these functions in combination with their
normal purpose. You should be better safe
than sorry, so get visible by fitting an
Illuminator. This electronic gadget comes
with easy-to-follow do it yourself
instructions.The Illuminator is developed for
use on Harley-Davidson motorcycles but can
be used on any motorcycle with a 12 Volt
system.
238332 Badlands Illuminator
ZODIAC’S “BEAM BOX” HEAD
LIGHT HI/LOW SWITCH RELAY
A must when using mini style push button
switches that are very popular amongst
custom bike builders because their small
dimensions. The same switches can also be
found in PM and Ness “Petite” handlebar
controls. Because they are so small these
switches can not cope with the current flow,
a relay must be used to switch from high
beam to low beam and vice versa. Zodiac’s
High & Low Beam switch relay is designed
the way Custom Bike Builders like it; it is
small enough to fit in almost any head light
as it only measures 1” x 1” x 25/32”
(25 x 25 x 20 mm) and has mounting tabs
to secure it. The “Beam Box” comes prewired and includes easy to follow
installation instructions.
741578 Zodiac's "Beam Box" High &
Low Beam switch relay
10300002_ZOD_H04_UK_25
1-9-2010
18:20
Pagina 025
Light Accessories
04
SWITCH RELAY
This High & Low Beam switch relay is
designed with the needs of today’s Custom
Bike Builder in mind. As the widely used
“petite” and other small handlebar switches
can not cope with the current flow, a relay
must be used. This relay measures only
1 1/4” x 1 1/4” x 5/8” (32 x 32 x 16 mm),
small enough to hide it in almost any head
light. Comes with hardware and
comprehensive instructions.
700894 Mini High Beam & Low Beam
switch relay
BADLANDS PLUG-IN
ILLUMINATOR
Badlands "Plug-In" Illuminator module
triples your visibility in the rear. Install a pair
of red lenses or custom turn signals with red
lenses. Now your bike has 3 running lights
and when you hit your brake you have
3 brake lights.Touch your turn signal button,
and you maintain your turn signal function
while the other side remains a running light,
or if you are braking, a brake light.
The "Plug-In" Illuminator module
features:
• Built-ln Load Equalizer
• Runs your stock OEM turn signals
• Runs custom Incandescent small turn
signals, Halogen and LED's too.
• Easy to follow instructions and connectors
included
• Made in the USA with quality components
239375 Fits FLH and FLT models
1985 thru 1996, Softail and
FXR models 1986 thru 1995,
Dyna models 1995 thru 1996,
and XL models 1986 thru 1998
239376 Fits XL models 2004 to present,
Security System compatible
BADLANDS' ORIGINAL PLUG-IN
ILLUMINATOR
Badlands' Plug-In Illuminator triples your
visibility in the rear. With this module your
bike has 3 running lights. Hit your brake, and
you have 3 brake lights. Touch your turn
signal button, and you maintain your turn
signal function while the other side remains
a running light, or if you are braking, a brake
light.The Illuminator features a built-in Load
Equalizer that allows you to run your stock
turn signals or incandescent small turn
signals, halogens or even LED's. The
Illuminator is also completely compatible
with the stock Security System and comes
with easy to follow instructions. Illuminators
for 1973 thru 1984 models come with
separate connectors, all other models have
connectors installed that plug straight into
your stock wiring. For a limited number of
models these modules are also available
with a pair of red rear turn signal lenses
included.
Illuminator module only
742854 Fits all Big Twin and Sportster
models 1973 thru 1984. Also
fits any motorcycle with
modified wiring or without
factory plugs
742855 Fits FLH models 1985 thru
1996, Softail, FXWG and FXR
models 1986 thru 1995, Dyna
models 1995 thru 1996 and
Sportster models 1986 thru
1998
742856 Fits Dyna models 1997 to
present, Sportster models
1999 thru 2003, Softail models
1996 to present and all FLH
and FLT models 1997 to present
742857 Fits Sportster models 2004 to
present
742853 742853 Fits 2008 to present
FXCW Rocker and FXCWC
Rocker Custom
742852 Fits all 2002 to present V-Rod
models
Illuminator module with red rear
turn signal lenses
742858 Fits FLH and FXRT models
1986 thru 1996 with FLH style
large flat turn signal lenses
742859 Fits Softail, FXWG and FXR
models 1986 thru 1995, Dyna
models 1995 thru 1996 and
Sportster models 1986 thru
1998 with FX style turn signals
742860 Fits all FLH and FLT models
1997 to present with FLH style
large flat turn signal lenses
742861 Fits Dyna models 1997 to
present, Sportster models
1999 thru 2003, Softail models
1996 to present and all FLH
and FLT models 1997 to present
with FX style turn signals
742862 Fits Dyna models 1997 to
present, Sportster models
1999 thru 2003, Softail models
1996 to present and all FLH
and FLT models 1997 to present
with "Deuce" style turn signals
742863 Fits Sportster models 2004 to
present
04-025
10300002_ZOD_H04_UK_26
1-9-2010
18:24
Pagina 026
Light Accessories
04
BADLANDS INTENSIFIER HI-LOW
MODULE
The Intensifier modules convert single
function LED's, Halogen or incandescent
bulbs to High and Low dual functions, such
as Run & Stop, Run & Turn, or High & Low.
Works for taillights, turn signals, marker
lights, fender tip lights, LED accent lighting
or even a pair of driving Lights. Dependent
on the module used you can run up to 50 or
100 watts in total without heat issues.
742864 Will run up to 50 watts. One set
of inputs, one output. One
module will run single or
multiple driving lights for High
& Low, or single or multiple
marker lights for Run & Stop.
Also can do Run & Turn on a
pair of turn signals when you
install 2 of these units
742865 Runs up to 100 watts total.
Features two inputs, two
outputs. Does Run & Stop or
High & Low. Does Run & Turn
for a pair of turn signals with
just one module
BADLANDS ILLUMINATOR PRO
Badlands Illuminator Pro is a custom bike
builders dream. Also works perfectly on a
stock Harley-Davidson or custom V-twin,
which does not have a self-canceling
system. In fact it is a combination of all
Badlands modules built into one unit. This
module controls every feature you would
want your turn signal system to do.
Automatic canceling, front running lights
and turn signals on single filament
incandescent or halogen bulbs, as well as
LED’s, rear running lights, brake light
function and turn signals on single filament
incan-descent or halogen bulbs as well as
LED’s. A built in load equalizer runs
-anything form LED's and up to 70 watts.
You can cancel turn signals at any time for
a quick lane change, and this module has a
built in emergency flasher mode, that does
not build up heat.
The Illuminator Pro features:
• Built-in automatic turn signal canceller
• Built-in load equalizer
• Front/run & turn signal for single filament
or halogen bulbs & LED's
• Rear/run, brake and turn signal functions
like Badlands Illuminator
• Emergency flashers without heat build-up,
even in parade use
• Cancels at any time (quick lane changes)
239377 Badlands Illuminator Pro
THE ZODIAC BRAIN BOX
"The Brain Box" is a trick little box that takes
away all the headaches when wiring your
custom motorcycle. Six micro wires run to
your switches with built in functions that
include start relay, hi low relay, kill switch
relay, and turn signal relay. The Brain Box is
programmable with your handlebar switches
to select if the turn signals operate as selfcanceling or manual canceling.All switches
wire to ground, which reduce the number of
wires and increase the life span of your
switches. The Brain Box measures
1" x 2" x 3" (2.5 x 5 x 7.5 cm), small enough
to be fitted under your tank or seat. Comes
with color-coded wires, and an easy to
follow installation instruction. Saves hours
and keeps wiring to a minimum for a cleaner
look. A must for any Custom Bike Builder.
Electrical Specification
• Power Supply: Motorcycle 12 Volt DC
battery system
• Current consumption: 80 mA.
• Nominal Ignition output: 500mA to 10A
• Headlamp output: 500mA to 10A
• Indicator output: 500mA to 10A
• Horn output: 500mA to 10A
• Starter Solenoid output: Max pull in
current 25A. Max hold in current 5A.
• Module Wires: Thin wall automotive
cable manufactured in accordance with
ISO 6722
Mechanical Specification
• Case: Molded from flame-retardant ABS
plastic (UL94V-0), measures 1" x 2" x 3"
(2.5 x 5 x 7.5 cm)
Warranty
12 months from the date of purchase
741360 Brain Box
04-026
10300002_ZOD_H04_UK_27
1-9-2010
18:27
Pagina 027
Light Accessories & Taillights
04
THE ZODIAC BRAIN BOX "LITE"
The ultimate solution for “Burned-Out” mini
switches. More and more Custom builders
are using the “Petit” or “Mini” handlebar
switches to operate lights etc. These mini
switches can’t handle the current flow if
used in the same way as the stock switches.
The contact area of the mini switches is
simply too small and they will burnout. This
electronic box will eliminate all problems
related to too many Amps flowing through
too little switches. It has 4 electronic relays
build in that can be activated with a
minimum of current flow.This will eliminate
all problems related with burning handlebar
switches. The thin electric wires needed to
connect this relay unit to the handlebar
controls can easily be routed inside the
handlebar. The Mini-Relays box now has a
build-in self-canceling turn signal relay and
measures only 3” long, 2” wide and 1” high,
so can be fitted easily under a tank or side
cover. Comprehensive instructions for ease
of installation are included.
741399 "Auto-off" Mini relays box for
mini switches
MALTESE CROSS TAILLIGHT
Show-Chrome with die-cast housing Light
is pre-wired, features license plate
illumination and includes 12 Volt 21/5 Watt
bulb.
162004 Taillight
165148 Replacement lens only
SPARTO TAILLIGHT NEW STYLE
Sparto taillight with improved lens and lens
fitment. Usable on almost all Custom style
rear fenders. The Chrome-plated version is
available in bulb-style with or without
TÜV/”E” approval, as well as TÜV/”E”
approved with bright shining LED’s.
162071 Sparto taillight without
TÜV/"E" approval, Chrome
plated
241104 Sparto taillight, TÜV/"E"
approved, Chrome-plated
162073 Sparto taillight without "E"
approval, polished aluminum
162151 Sparto LED taillight Eappr.w/licensemnt
Replacement parts
162095 Replacement mounting rubber
165074 Red lens only
241105 Replacement lens, TÜV/"E"
approved
167395 Replacement "large head" light
bulb, 12V 32/3W (10 pack)
167370 Small head dual filament
replacement bulb (10 pack),
12V 21/6W
SPARTO TAILLIGHT WITH
EXTENDED LENS
Chrome plated Sparto taillight with an
extended lens. The longer lens allowed to
incorporate a clear lens for the license plate
illumination. Light comes pre-wired and a
12V 21/5 Watt bulb.
162123 Sparto taillight with extended
lens
"KNIGHT" TAILLIGHT
Beautifully Chromed Custom taillight.
Universal mount for all Custom applications.
Fits our license/taillight brackets. Pre-wired
and includes 12 Volt 21/5 Watt bulb.
162072 Knight taillight
165150 Red lens only
LUCAS STYLE TAILLIGHT
Lucas style taillight with universal mounting
for all Custom applications, available with
or without “E” approval, as well as with or
without Custom mounting bracket. Can be
used in combination with our backing plates
or our exclusive “British style” taillight
bracket (ZPN 301624).
162019 Lucas style taillight
165193 Lucas style taillight, TÜV/EU
approved
165192 Lucas style taillight with
Custom mounting bracket,
TÜV/E approved
301624 British Style taillight bracket
165022 Red lens only
165194 Red lens only, TÜV/EU approved
LED CAT-EYE TAILLIGHT
Custom style Chrome-plated taillight with
universal two bolt mounting and license
plate illumination. Features bright shining
LED’s in stead of ordinary bulbs.
162307 LED Cat-Eye taillight
04-027
10300002_ZOD_H04_UK_28
1-9-2010
18:32
Pagina 028
LED Taillights
04
STOCK STYLE LED TAILLIGHTS
Show Chromed stock style taillights are
available in two models. The Early Style is
used on all models from 1955 thru 1972,
the Late Style is used on all models from
1973 thru 1999. These taillights feature
bright LED's in stead of ordinary bulbs and
can also be used for many Custom
applications.
A. 162195 Early Style LED taillight
B. 162308
Late Style LED taillight
LED MINI TOMBSTONE TAILLIGHT
These Tombstone style taillights are a copy
of the taillight as used on most models from
1940 thru 1954, but in reduced dimensions.
They are just 4 1/2" high and 2 1/2" wide
and feature bright LED's in stead of ordinary
bulbs. Mini Tombstone taillights might be
small in size but are great for custom
applications. Best of all is that these lights
carry lenses with the E-approval sign.
A. 162131 LED mini Tombstone
taillight
B. 162133 LED mini Tombstone
taillight with license plate
bracket
LED CUSTOM FAT BOB TAILLIGHT
This LED Fat Bob taillight features bright
shining LED’s in stead of ordinary bulbs.
Makes a great looking combination when
fitted underneath a Fat Bob rear fender in
combination with the separately available
Custom taillight bracket.
162319 LED Custom Fat Bob taillight
160204 Taillight bracket
HELLFIRE LED TAILLIGHT
This universal 6 1/2" (16.5 cm) wide, 2 1/2"
(6.3 cm) high and 3 1/2" (9 cm) deep
taillight fits to flat surfaces with the two
included studs and nuts. Features 15 LED's
for brake and taillight function and 4 LED's
for license plate illumination. Comes prewired and carries EU approval.
161005 Hellfire taillight
04-028
743336 Rapide Taillight, all chrome
743341 Rapide Taillight, black powder
coat with highlighted brill bars
CRIME SCENE CHOPPERS RAPIDE
LED TAILLIGHT
The Rapide Taillight has 48 super-bright
LED's for unsurpassed visibility.The LED unit
is wired for both "stop" and "run". A
chrome 3-hole fender mount base is
included, along with all stainless hardware.
The Rapide taillight measures approx. 2"
(5 cm) tall, 2 1/2" (6.4 cm) wide and is 2"
(5 cm) deep. A chrome side mount bracket
that takes the taillight as well as your license
plate is available separately.
743335 Rapide Taillight, satin/polished
body with polished brass grill
743337 Chrome plated steel license
plate with mount tabs for
Rapide taillight (not included)
10300002_ZOD_H04_UK_29
1-9-2010
18:36
Pagina 029
Taillights
04
MALTESE CHROME PLATED
BILLET ALUMINUM LED MALTESE
CROSS TAILLIGHT
A complete, re-designed version of the
popular Maltese cross taillight. Housing is
CNC machined from solid aluminum and has
a show-chrome finish. Bright shining 12 Volt
LED's for taillight, brake light and license
plate light. Comes pre-wired and ready to
install on any custom project.
160603 Chrome billet aluminum
Maltese Cross LED taillight
CAT-EYE TAILLIGHT
Custom style, Chrome-plated taillight with
universal two bolt mounting for most
applications. Features license plate
illuminator. The Cat Eye Taillight is also
available with EU/TÜV “E” approval. Lenses
are separately available.
162206 Cat-Eye taillight
239187 Cat-Eye taillight, TÜV/EU
approved
165105 Lens only, red
239188 Lens only, red, TÜV/EU
approved
165107 Lens only, clear
CHROME BILLET MALTESE STYLE
LED TAILLIGHT
Machined from solid billet aluminum, than
polished to perfection and show chromed
foe perfect finish.They feature bright shining
LED's for brake and taillight function, as well
as for license plate illumination. Lights are
4" (10 cm) high, 4" (10 cm) wide and only
0.93" (2.4 cm) deep. They come pre wired
with a red lens or clear lens and are TÜV/EU
approved. Clear lens version has red LED's
for brake- and taillight functions.
162516 Clear lens Maltese LED taillight
162517 Red lens Maltese LED taillight
SUPER SLIM CAT-EYE LED
TAILLIGHT
Updated design of the Classic Cat-Eye
taillight, features super bright shining LED's
for tail light, brake light and license plate
illumination. The chrome-plated housing is
reduced in height to an absolute minimum
of 15 mm. (19/32").Available with a classic
red lens and clear LED's or late clear lens
with red LED's. Both taillights come prewired and with EU/TÜV "E" approval mark.
160634 LED taillight wit red lens
160649 LED taillight with clear lens
160650 Clear Cat-Eye replacement lens
MINI CAT EYE TAILLIGHT
The popular Cat Eye taillight is also available
as a Mini Cat Eye. The lens of the Mini Cat
Eye taillight measures only 2 3/4” wide and
1 11/16” high, but still has TÜV/EC approval.
Lights come pre-wired and complete with
12 Volt, 21/5 Watt dual filament bulb.These
Mini Cat Eyes are available with or without
aluminum mounting bracket.
165183 Mini Cat Eye taillight with
bracket
165184 Mini Cat Eye taillight without
bracket
165185 Replacement red lens
UNIVERSAL DUAL MINI CAT EYE
TAILLIGHT WITH LICENSE
BRACKET
Dual version of the Single Mini Cat Eye
taillight. Lenses measures 2 3/4” (7 cm)
wide and 1 11/16” (43 mm) high. The prewired die-cast license plate bracket is
chrome-plated and equipped with two bolts
to allow easy installation on most Custom
motorcycles. Includes bulbs, license plate
bracket and red lenses with built-in
reflectors. Dimensions of the complete unit
are 2 3/4” (7 cm) high, 6 3/4” (17 cm) wide
and 2” (5 cm) deep. Available with or
without TÜV/EC approval.
165214 Complete unit
165209 Dual mini cateye taillight
w/lic.brck EU
165185 Replacement red lens
04-029
10300002_ZOD_H04_UK_030
29-9-2010
15:05
Pagina 030
Taillights
04
DUAL HI-GLIDE BULLET STYLE
LED TAIL LIGHT
The dual Hi-Glide bullet tail light feature
30 bright red shining LED’s. The individual
lights are 2 3/4” (7 cm) long and
1 1/2” (4 cm) in diameter. Total width is
3 1/2” (9 cm), total height 3” (7.5 cm). EU
approved and comes pre-wired for brake
and taillight functions.
160925 Dual Hi-Glide LED taillight
"STOP!" TAILLIGHT
This universal taillight combines taillight,
stoplight-, and license plate lighting into an
authentic housing. Features two threaded
studs for mounting on most universal license
and taillight brackets.Also includes a round
multi-hole mounting plate to put it wherever
you like it. Comes complete with bulb and
acrylic lens, measures 2 7/8" in diameter
and is 1 7/8" deep.
165215 STOP! Taillight
04-030
CAT HEAD UNIVERSAL TAILLIGHT
Taillight combines tail-, stop-, and license
plate light into a fancy shaped housing.
Features two threaded studs for mounting
on most universal license and taillight
brackets. Complete with bulb and acrylic
lens. Measures 3" high, 4 5/8" wide and
2 1/4" deep.
165217 Cat Head bulb style taillight
CUSTOM TAILLIGHT
This double barrel Custom taillight has
TÜV/EU approved lenses and comes with a
universal bracket to allow installation on
almost any fender. Taillights and lenses are
also sold individually.
165189 Double barrel taillight, TÜV/EU
approved
165190 Custom round taillight, TÜV/EU
approved
165191 Taillight lens only, TÜV/EU
approved
EU APPROVED SKY HAWK
TAILLIGHTS
Custom style flat mount taillight. Available
in your choice of classic bulb style, or LED
style. The classic Sky Hawk features two
duplex bulbs and a red lens, where the LED
Sky Hawk has bright shining red LED's and
a clear lens. Lenses are fitted almost
seamless in the chrome housing. Lights are
6 1/2" wide and nearly 2" high, come prewired, and complete with a rubber seal. Both
the classic and LED styles are EU-approved.
165163 Classic bulb style with red lens
165162 LED style with clear lens
PRO-ONE BILLET SHOW BIKE
TAILLIGHT
Pro-One’s Show-Bike taillight features a
unique “Thin-line” design that is only one
inch thick. CNC machined from a block of
Billet aluminum and Chrome-plated. Mounts
on most backing plates.Measures 2 7/16”x 5”
(6,2 x 12,7 cm).
237802 Show Bike taillight
236115 Long replacement bulb, 10 Watt
236114 Replacement bulb, 5 Watt,
10 pack
10300002_ZOD_H04_UK_31
1-9-2010
18:43
Pagina 031
Taillights
04
UNIVERSAL DIAMOND STYLE
TAILLIGHT
Taillight features two threaded studs for
easy mounting on most flat surfaces. Unit
comes with chrome-plated die-cast frame,
red acrylic lens for stop/taillight section,
blank acrylic lens for license plate
illumination, 12 Volt 21/5 Watt bulb, and is
completely pre-wired. Light is 2 3/4" high,
5 1/2” wide and 2 1/4" deep.
165210 Diamond style taillight
EU APPROVED "SNAKE EYE"
TAILLIGHT
This "Snake Eye" taillight is the stretched
version of the popular Cat-Eye taillight.Wide
and sleek looking, available with or without
aluminum bracket, with classic bulbs and a
red lens or state-of-the-art bright shining
red LED’s with a clear lens. Taillights are
made from Chrome-plated ABS, measures
approx. 6 1/4" wide and are EU approved.
165186 Bulb type, with bracket
165187 Bulb type, without bracket
165197 With clear lens and red LED’s
without bracket
165188 Replacement red lens
CIRCLE STYLE TAILLIGHT
Aggressive styled, CNC machined Billet
aluminum taillight to add that real touch of
class to your tail end.The Circle Style taillight
comes complete with integrated 7 7/8” x
7 7/8” beefy licence plate mounting.
Polished finish.
733150 Circle Style taillight
DIE-CAST BEEHIVE TAILLIGHT
Beautifully Chrome-plated die-cast taillight.
A perfect copy of the Early Style Harley
taillight. Universal fender mount for most
applications. Replaces the OEM taillight on
1939 to 1946 Harley-Davidson.
162196 Beehive taillight, (68002-39)
165151 License lens only clear,
(OEM 68094-39)
165152 Taillight lens red, (68090-39)
STAMPED STEEL BEEHIVE
TAILLIGHT
A perfect copy of the stamped steel Early
Style Harley-Davidson taillight as used on
many models from 1936 thru 1946. Light is
beautifully Chrome-plated and has universal
fender mount for most applications.
Replaces the OEM taillight on 1939 to
1946 Harley-Davidson (OEM 68002-39).
162197 Beehive taillight (68002-39)
165153 Replacement red lens
TOMBSTONE TAILLIGHT
A perfect reproduction of the early style
taillight.This beautifully Chrome-plated diecast light has a universal fender mount for
easy mounting on most Custom fenders.
Includes Chrome license mount, black
rubber mounting gasket and 12 Volt
20/5 Watt bulb.Also available with EU (TÜV)
approval.
165038 Tombstone taillight
(OEM 68003-47T)
241100 Tombstone taillight,
EU approved
165023 Red lens only (OEM 68090-47)
241101 "E" approved red lens only
165062 Clear license light lens
(OEM 68093-47)
165084 Taillight rim (OEM 68086-47)
165083 Gasket lens (10 Pack)
(OEM 68122-47)
04-031
10300002_ZOD_H04_UK_32
1-9-2010
18:47
Pagina 032
Taillights
04
LED TOMBSTONE TAILLIGHT
The Tombstone is a perfect copy of the
taillight as used on most models from
1940 thru 1954 but features bright LED’s in
stead of ordinary bulbs. Can also be used
for many Custom applications. Has a perfect
show Chrome finish.
162311 Tombstone Style LED taillight
ORIGINAL STYLE TAILLIGHT
Fully Chromed original style taillight.
Replaces original on all Twins 1955 to
1973 and for Custom applications.
162021 Taillight (OEM 68010-64B)
165007 Replacement lens
(OEM 68090-69)
165058 License plate replacement lens
(OEM 68093-55)
CLASSIC TEARDROP TAILLIGHT
Pro-One’s teardrop lights are CNC machined
from solid aluminum, polished and then
perfectly Chrome-plated. They provide that
fashionable “Retro-Look” at the rear section
of your bike. Available with or without blue
dot lens. A recessed bucket is also available
for flush mount. Check available clearance
between tire and fender before installing.
Depth can be trimmed slightly.
239401 Teardrop taillight flush mount
239403 Teardrop taillight Blue dot
239402 Recessed bucket for Teardrop
taillight
BILLET ALUMINUM LED CAT-EYE
TAILLIGHT
Custom style, billet aluminum taillight with
universal two bolt mounting. Features HighTech super-bright LED’s (Light Emitting
Diodes) behind the lens. LED’s use less
electric power and have an almost unlimited
lifetime. Has separate LED’s for license plate
illumination.
160549 Billet LED Cat-Eye taillight
LATE STYLE TAILLIGHT
Chrome-plated die-cast frame with acrylic
lens. Fits all models 1973 thru 1999. Also
usable for Custom applications.
162014 Taillight (OEM 68008-73A)
165037 Lens only (OEM 68027-73 &
68034-77)
CLEAR LENS LED TAILLIGHTS
Add state-of-the-art looks with these clear
lens taillights. The clear lens gives an
unrestricted view on the bright red LED's for
stoplight and taillight, and the clear LED's
for the license plate illumination. Lights are
a bolt-on replacement for the stock taillight,
and come pre-wired for quick and easy
installation. Available for 1973 thru
1998 and 1999 to present models, both in
your choice of with chrome or black Carbon
Look reflector.
Fits 1973 thru 1998 models
160527 With chrome reflector
160528 With black Carbon Look
reflector
Fits 1999 to present models
160525 With chrome reflector
160526 With black Carbon Look
reflector
04-032
10300002_ZOD_H04_UK_33
1-9-2010
18:51
Pagina 033
Taillights
04
HI-GLIDE STREAMLINER BULLET
STYLE TAIL LIGHT
The chrome Hi-Glide streamliner bullet style
tail light is 3 1/2” (9 cm) long and
2 1/4” (6 cm) in diameter. The total height
3” (7.5 cm), including the swivel 2-hole
mounting bracket. Taillight is EU approved,
has license plate illumination and comes
pre-wired for brake and taillight functions.
160927 Hi-Glide Streamliner taillight
REAR TRI BAR LED LIGHTS FOR
STREET GLIDE
Our tri-bar LED light replaces the stock rear
fender mounted running light on 2006 to
present FLHX Street Glides. The LED's glow
in running mode and will increase in
intensity when the brakes are applied. They
come with hardware, wiring and OEM loom
connectors and are available with smoke or
clear lens. Can also be installed on 1999 thru
2008 Touring models when the chrome rear
fender extension ZPN 160805 is installed.
160880 Tri-bar red LED light with smoke
lens
160881 Tri-bar red LED light with clear
lens
160805 Chrome rear fender extension
DIAMOND STYLE LED TAILLIGHT
Diamond Style taillight with bright shining
LED's. Made from billet aluminum and has
chrome finish. Light comes pre-wired for
brake and taillight use and also has a
provision for license plate lighting.
160706 Diamond style LED taillight
STOCK STYLE TAILLIGHT UNITS
These taillights are the lens/reflector units
as used on 1999 thru early 2003 and late
2003 to present models. The 1999 thru
2003 style is also available with a clear lens
for use in conjunction with ZPN 166031 red
dual filament LED bulbs.
160630 Red lens, fits 1999 thru early
2003 models, except FLSTF
Softail Springers (68140-99A)
160631 Clear lens fits 1999 thru early
2003 models, except FLSTF
Softail Springers
166031 Dual filament red LED bulbs
(10 Pack)
160632 Red lens, fits 2003 to present
models except FLSTS Softail
Springers (OEM 68369-03)
NARROW LED CUSTOM
TAILLIGHT
This Custom LED tallight measures only
5 3/4” wide and just 1” high, and is prewired for brake and taillight use and also
has a provision for license plate lighting.The
taillight can be mounted with two bolts on
any flat surface.
160536 Replacement Narrow LED
taillight
160523 Replacement lens
DEUCE & V-ROD TAILLIGHTS
Stock replacement for FXSTD "Deuce"
models. Available for 2000 models as well
as 2001 thru 2005 Deuce and 2002 thru
2006 V-Rod models. Both models are
available with a red lens or a clear lens.
Versions with clear lens are to be used with
our red LED bulbs ZPN 166031.
Fits FXSTD "Deuce" 2000 models
163151 With red lens
(OEM 68931-00A)
163150 With clear lens
Fits FXSTD "Deuce" 2001 thru
2005and 2002 thru 2006 V-Rod
163153 With red lens (OEM 68876-01)
163152 With clear lens
04-033
10300002_ZOD_H04_UK_34
1-9-2010
18:55
Pagina 034
Taillights & License Plate Brackets
FXWG TAILLIGHT VISOR
Gleaming Chrome visor for the inverted style
taillight when used with the Fat Bob fenders.
Fits all XLCR, FXST(C), FXSTS, FLSTB and
4 Speed FXWG models 1977 to present.
302025 Taillight visor
04
UNIVERSAL LED TAILLIGHT WITH
INTEGRATED LED TURN SIGNALS
This smooth looking one piece taillight
integrates a taillight and turn signals into
one unit. Features two threaded studs for
universal mounting on most flat surfaces.
Unit comes completely pre-wired, with
multicolored acrylic lens and clear LED's.
Dimensions are 1 7/8" high, 6 5/8" wide
and 1 1/8" deep.
165232 LED taillight with integrated
turn signals
CHROME STEPPED LED TAILLIGHT
This custom taillight is made from billet
aluminum and has a chrome plated finish.
The housing features a stepped milled,
clover shape design for a stunning look.
Has bright shining LED’s for brake and
taillight functions. Measures 4 1/2" x 2 1/2”
(115 mm x 64 mm).
160720 LED Taillight
EU APPROVED UNIVERSAL LED
CLEAR LENS TAILLIGHT
This EU approved taillight has bright shining
red LED’s and a clear lens. Has two threaded
studs for easy mounting on most flat
surfaces. Taillight is 4 1/2” wide and
1 1/8” high and comes pre-wired.
165248 LED Clear lens taillight
04-034
SIDE MOUNT & FENDER MOUNT
LICENSE PLATE BRACKETS WITH
LED TAILLIGHTS
These “Design” LED taillight and License plate
brackets are the ultimate in design and
function. Both the side mount and rear mount
are machined from Billet aluminum and then
Chrome-plated for a perfect finish. Other
features of LED lights are the use of less
electrical power and live longer than common
bulbs. The narrow LED light that comes with
these brackets is only 5 3/4” wide and just
1” high, and is pre-wired for brake and
taillight use and also has a provision for
license plate lighting. This narrow LED
taillight, as well as all other taillights, is
separately available for Custom applications.
The Side Mount Brackets bolt to the rear axle.
The fender mount license plate bracket comes
with hard rubber fender mount cushion and
hardware. Side mount license plate brackets
are available to take a horizontal or vertical
license plate. The vertical brackets are
available with normal flat license plate frame
or in a curved version. For those looking for a
more classic look we also offer the vertical
mount brackets with a LED Cat-Eye taillight.
With Narrow LED taillight
160530 Horizontal side mount
160531 Vertical side mount flat license
plate bracket
160532 Vertical side mount with curved
license plate bracket
160535 Fender mount
160536 Narrow LED taillight for Custom
use or as a replacement for ZPN
160530, 160531, 160532 and
160535
160523 Replacement lens
With Cat-Eye taillight
160534 Vertical side mount with LED
Cat-Eye taillight
162307 Cat-Eye LED taillight for Custom
use or as a replacement for ZPN
160533 and 160534
10300002_ZOD_H04_UK_35
1-9-2010
18:58
Pagina 035
Taillights & License Plate Brackets
04
UNIVERSAL RED BOLT-ON
REFLECTORS
For your personal safety we have both round
style and square style reflectors in our
program. All reflectors feature acrylic lens
with black bolt-on mounting base. Round
style is 20 mm (approx. 3/4") in diameter.
Square style is 1 3/8" x 1 3/8" (35 x 35 mm).
Both are just 10 mm thick. Sold each.
165222 Red, square reflector
165223 Red, round reflector
FATBOB STYLE TWIN CROSS LED
TAILLIGHT
Custom dual taillight with E-marked clear
lenses and a total of 26 bright shining red
LED’s for brake and taillight functions, as
well as 5 bright shining white LED’s for
license plate illumination. Comes complete
with chrome plated mounting bracket to fit
OEM style FXWG and FXDWG fenders, as
well as Zodiac’s Fat Bob rear fenders.
162467 Twin Cross LED taillight with
bracket
SKULL MANIAC LICENSE PLATE
BRACKETS WITH LED TAILLIGHTS
Taillight and license plate brackets for "Skull
Maniacs". The license plate frame features
no less than 25 different and very detailed
skulls. The skulls in the two top corners, as
well as the one in the bottom center, have
LED lighted eyes. Both the side mount and
rear mount from these LED taillight and
License plate brackets are machined from
billet aluminum and then chrome plated for
a perfect finish. The license frame bracket
measure 7”x 4”. The taillight features
19 bright LED lights that use less electrical
power and live longer than common bulbs.
Lights are pre-wired for brake and taillight
use and also have a provision for license
plate lighting. Side mount license plate
brackets bolt to the rear axle, and take a
horizontal license plate. Fender mount
license plate brackets come with your choice
of straight or compensating angle solid
block mount.
160700 Horizontal side mount
160704 Straight fender mount
160705 Compensating angle mount
CUSTOM FAT BOB TAILLIGHT AND
BRACKET
This great looking taillight fits most Fat Bob
style fenders and fills the entire area
underneath the fender. An adjustable
mounting bracket that is great for use with
fenders from 7" (17.8 cm) up to 9"
(22.9 cm) wide is separately available.
Together, this taillight and bracket will give
your bike a unique individual style.
160161 Chrome Custom taillight
bracket, adjustable
160291 Custom Fat Bob taillight
160316 Replacement red lens
04-035
10300002_ZOD_H04_UK_36
1-9-2010
19:02
Pagina 036
Taillights & License Plate Brackets
04
MIDI CAT EYE TAILLIGHT
The Midi Cat Eye taillight has a lens that measures only 3 1/4" wide
and 2 1/8" high. Light comes complete with dual filament bulb for
tail and brake light and license plate lighting. Our Midi Cat Eyes are
TÜV/EC approved. Available with or without aluminum mounting
bracket.
165180 Midi Cat Eye taillight with bracket
165181 Midi Cat Eye taillight without bracket
165182 Replacement red lens
LICENSE PLATE BRACKETS WITH LED TAILLIGHTS
Both the side mount and rear mount from these LED taillight and
License plate brackets are machined from billet aluminum and then
chrome plated for a perfect finish.The license frame bracket measure
7"x 4". The taillight feature bright LED lights that use less electrical
power and live longer than common bulbs. Lights are pre-wired for
brake and taillight use and also have a provision for license plate
lighting. Side mount license plate brackets bolt to the rear axle, and
take a horizontal license plate. Fender mount license plate brackets
come with your choice of straight or compensating angle solid block
mount.
160701 Horizontal side mount
160702 Straight fender mount
160703 Compensating angle mount
160707 Replacement LED taillight
04-036
DERBY MOUNT LICENSE PLATE BRACKET WITH
DIAMOND STYLE LED TAILLIGHTS
The ultimate "Design" LED taillight. It is a one-piece construction of
a Derby cover with a curved license plate bracket. Machined from
Billet aluminum and then Chrome-plated for a perfect finish. Other
features of LED lights are the use of less electrical power and live
longer than common bulbs. The Diamond Style LED light that comes
with this bracket is pre-wired for brake and taillight use and also has
a provision for license plate lighting. Fits all Big-Twin models from
1970 thru 1999 with 3-hole derby cover. Taillight is also available
without the derby mount.
160551 Diamond Style LED taillight with curved license plate
bracket
160706 Diamond style LED taillight
RBS LED FOG LIGHT
Another innovative product from RBS is this fog light. Ensures your
visibility during bad weather conditions.Available in chrome or glossy
black anodized finish and is pre-wired for easy mounting.This elegant
housing is CNC machined and come complete with clear lens, sold
each.
722513 RBS LED fog light chrome
722514 RBS LED fog light black
10300002_ZOD_H04_UK_37
1-9-2010
19:06
Pagina 037
Taillights & License Plate Brackets
04
LICENSE PLATE BRACKETS WITH DIAMOND STYLE
LED TAILLIGHTS
These "Design" LED taillight and license plate brackets are the
ultimate in design and function. Both the side mount and rear mount
are machined from Billet aluminum and then Chrome-plated for a
perfect finish. Other features of LED lights are the use of less electrical
power and live longer than common bulbs. The Diamond Style LED
light that comes with these brackets is pre-wired for brake and taillight
use and also has a provision for license plate lighting. Side mount
license plate brackets bolt to the rear axle, and are available to take
a horizontal or vertical license plate.The vertical brackets are available
with normal flat license plate frame or in a curved version. Fender
mount license plate bracket comes with your choice of hard rubber
fender mount cushion, or solid block mount.
160570 Horizontal side mount
160571 Vertical side mount flat license plate bracket
160572 Vertical side mount with curved license plate bracket
160573 Rubber fender mount
160574 Block fender mount
Replacement Parts
160706 Diamond style LED taillight
CYCLOPS SIDE MOUNT & FENDER MOUNT LICENSE
PLATE BRACKETS WITH LED TAILLIGHT
Cyclops license plate brackets are CNC machined from 6061-T6
aluminum.Available in various styles in either side- or fender mount.
All Cyclops license plate brackets feature a pre-wired high intensity
LED taillight and are chrome plated. Take US-size 4" (10.2 cm) x 7"
(17.8 cm) license plates. Side mount license plate brackets come
complete with an insert styled spacer, for easy installation on 3/4",
1" and 25 mm rear axle applications.All required mounting hardware
is includes. Taillight is also separately available.
161050 Vertical side mount with LED taillight
161051 Radial side mount with LED taillight
161052 Horizontal side mount with LED taillight
161053 Horizontal fender mount with LED taillight
161054 LED taillight only
ROLAND SANDS DESIGN TRACKER TAG BRACKET
Roland designed the Tracker Tag Bracket with the multi hole gusset
looks, as used on his Vintage handlebars, in mind. Bracket is made
from 3/16" laser cut 1018 steel, the license plate frame from billet
aluminum. It bolts to the passenger foot peg hole and mounts US
size license plates vertically.The LED taillight is dual circuit for taillight
and brake light functions. Available with a chrome or black powder
coated finish and comes with chrome hardware.
740764 Black powder coated
740765 Chrome plated
04-037
10300002_ZOD_H04_UK_38
1-9-2010
19:10
Pagina 038
Taillights & License Plate Brackets
BILLET LICENSE PLATE/TAILLIGHT
KITS WITH TURN SIGNALS
Black aluminium with Mini Billet aluminium
taillight. License plates bracket measures
7 3/4" x 7 3/4" and has a machined groove
to hide the wiring. Lenses are E-approved.
04
SIDEMOUNT LICENSE PLATE
BRACKET WITH GOTHIC LED
TAILLIGHT
Machined from billet aluminum with a
chrome plated finish.Almost 30 brilliant LED’s
are used in the taillight, they will get you
noticed anywhere. Comes pre-wired and is
available in two styles, a flat and a radius
version. The area to mount the licenseplate
measures 4” x 6 11/16” (100 mm x 170 mm).
The LED taillight is also separately available.
160790 Flat bracket with taillight
160791 Radius style bracket with
taillight
160792 Gothic taillight only
RBS CUSTOM LED TAILLIGHTS
WITH LICENSE PLATE BRACKET
FOR V-ROD
Complete to install Custom LED taillight
with license plate bracket that bolts straight
onto your V-Rod. License plate measures
7 3/4" x 7 3/4". License plate and mounting
block are made from Billet aluminum and
have a polished,chromed or black finish.The
Bullet style turn signals come with LED lights
too. Hardware included and ready to install
on V-Rod models 2002 to present. Lenses
are marked with the E-approval sign.
Custom LED taillight with license
plate bracket
722507 Polished
722508 Chrome
722509 Black
Custom LED taillight & turn
signal combo with license plate
bracket
722510 Polished
722511 Chrome
722512 Black
04-038
721937 Billet license plate/taillight kits
with turn signals
CUSTOM LED TAILLIGHT WITH
LICENSE PLATE BRACKET
New version of RBS' custom taillight is
smaller but looks brighter. These billet
aluminum license and taillight brackets are
available with or without turn signals and
come in polished aluminum, chrome or black
coated. Taillight lens carry the E-approval
sign.
722480 Polished with chrome LED
taillight
722481 Chrome plated with chrome
LED taillight
722482 Black coated with black LED
taillight
722483 Polished with chrome LED
taillight and LED turn signals
722484 Chrome plated with chrome
LED taillight and LED turn
signals
722485 Black coated with black LED
taillight and LED turn signals
REBUFFINI VEGA ITALY
SIDEMOUNT LICENSE PLATES
Extremely clean look thanks to internal
wiring. Kits include an E approved taillight
with license plate illumination. They fit
directly on stock swing arms with no
modifications. Hardware kit included.
Available with a short or a long bracket.
Short bracket measures 218 mm, long
bracket measures 288 mm. License plate
backing
plate
measures
6 15/16" x 6 15/16" (17.6 x 17.6 cm).
Fits 1984 thru 1999 Evolution
Softail
746624 Polished, short
746627 Polished, long
746625 Black, short
746628 Black, long
746626 Chrome, short
746629 Chrome, long
Fits 2000 thru 2007 Twin Cam
Softail
746630 Polished, short
746633 Polished, long
746631 Black, short
746634 Black, long
746632 Chrome, short
746635 Chrome, long
Fits 2008 to present FXCW and
FXCWC Rocker
746636 Polished, short
746639 Polished, long
746637 Black, short
746640 Black, long
746638 Chrome, short
746641 Chrome, long
10300002_ZOD_H04_UK_39
1-9-2010
19:14
Pagina 039
Taillights & License Plate Brackets
04
CUSTOM LED TAILLIGHT & TURN
SIGNAL COMBO FOR V-ROD
Billet aluminum 7 3/4" x 7 3/4" license
plate with mounting block, LED taillight and
LED turn signals. The taillight features a
clear, acrylic lens with red LED's, giving hat
special kind of light that makes your bike
stand apart from the crowd.The Bullet style
turn signals feature a LED light too. Comes
complete with hardware, ready to install on
2002 to present V-Rod models and have Eapproval.
722287 Taillight & Turnsignal Combo
TAILLIGHT LENS
Taillight lens and grill kit with blue dot fits
all models from 1973 thru 1999. The blue
dot is centered and securely held in place by
a Chrome mounting ring.
160216 Taillight lens
TAILLIGHT VISOR WITH
EMBOSSED EAGLE LOGO
Show-Chromed taillight visor with an
embossed Eagle logo and a cut out for
license plate illumination. Fits FX 1973 thru
1985, FXR 1982 thru 1994, FLH 1973 to
present (except FLHX and 2009 and later
FLHR) , FLT 1980 to present (except 2009
and later FLTR), most Sportster models 1973
to present (except XL 883 N & XL 1200 N),
FLST Heritage Softail, FLSTC Heritage Softail,
FLSTF Fat Boy, and Dyna models 1991 to
present (except FXDF and 2009 and later
FXDB).
160250 Chrome taillight visor
JEWELED BLUE DOT
The nostalgic blue dot complete with
Chrome mounting ring for secure mounting
on most indicator or taillight lenses (pair).
165154 Jeweled Blue Dot
CUSTOM LED TAILLIGHTS FOR
V-ROD
Complete and ready to install Custom LED
taillight with E-approval that bolts straight
onto your V-Rod. License plate measures
7 3/4" x 7 3/4" and has a machined groove
to hide the wiring. License plate and
mounting block are made from Billet
aluminum and have a black or clear
anodized finish. The LED taillight gives that
extra-ordinary light that matches perfectly
with your bikes styling. Comes complete
with hardware. Fits V-Rod models 2002 to
present.
722288 Clear anodized
722289 Black anodized
TAILLIGHT TRIM RING
Chrome taillight trim ring which fits all
models 1973 thru 1999.
160215 Taillight trim ring
TAILLIGHT VISOR
Show-Chromed taillight visor with a cut out
for license plate illumination. Fits FX 1973
thru 1985, FXR 1982 thru 1994, FLH 1973
to present (except FLHX and 2009 and later
FLHR) , FLT 1980 to present (except 2009
and later FLTR), most Sportster models 1973
to present (except XL 883 N & XL 1200 N),
FLST Heritage Softail, FLSTC Heritage Softail,
FLSTF Fat Boy, and Dyna models 1991 to
present (except FXDF and 2009 and later
FXDB).
301326 Chrome taillight visor
(OEM 68006-83T)
TAILLIGHT BRACKET
Polished casting. Takes Lucas Style taillight
and will fit any Custom rear fender.
301624 British Style taillight bracket
04-039
10300002_ZOD_H04_UK_40
1-9-2010
19:18
Pagina 040
Taillight Covers & Brackets
04
SIDE MOUNT TAILLIGHT BRACKET
Heavy gauge, Chrome-plated sidemount
taillight and license bracket. Fits right and
left side. Takes Custom style taillights like
Cat-Eye, Knight light, Lucas Style etc.
160212 Taillight bracket
PRO-ONE SHOW BIKE LICENSE &
TAILLIGHT BRACKET
This show bike license light and taillight
assembly is CNC machined from Billet
aluminum. Pro-One gave as much attention
to the back as they did to the front. Includes
a unique hidden mounting design that
eliminates any visible bolts on the face of
the license frame. It includes Billet backing
plate, Billet frame, Billet taillight and Billet
wedge bracket to mount the assembly to
your fender. Measures 6 3/4" x 7 1/4".
SLOTTED GRILL FOR LATE STYLE
TAILLIGHT
Beautifully Chrome-plated grill with
decorative horizontal slots. Fits OEM or
aftermarket late style taillights on 1973 thru
1999 models.
160163 Slotted grill for late style
Note: Light not included, must be ordered
separately (ZPN 162019).
237803 Show bike license & taillight
assy
CHROME TAILLIGHT MOUNTING
BLOCK
Billet aluminum mounting block with
1/4 UNC threaded 3-hole fixing and counter
bore mounting holes. Takes most taillights
with 4" center-to-center distance. Comes
complete with hardware.
160972 Layback License plate mounting
bracket
UNIVERSAL LICENSE AND
TAILLIGHT BRACKET
Universal license and taillight bracket
mounts to almost any rear fender and takes
Lucas Style, Knight and Cat-Eye taillights.
Available in plain aluminum or chrome
plated.
095051 Aluminum
095052 Chrome plated
CHEVRON STYLE GRILLS
These Chrome taillight grills were made to
give the rear end of your bike the same look
as many older models with chevrons on the
rear fender.
160210 Chevron-grill for 1955 thru
1972 taillight
160211 Chevron-grill 1973 thru
1999 OEM-style taillight
"SPEAR" CAT-EYE LENS COVERS
These die-cast aluminum covers will slip over
the lens of the Cat-Eye taillights. They are
available in Chrome or gold plated finish and
are a perfect match with our Spear mirrors.
The finishing touch of your “backside”.
302041 Chrome-plated
302042 Gold plated
BILLET FAT BOB LICENSE PLATE
FRAME WITH LIGHT
This frame is the perfect finishing touch for
those of you who have dressed your bike
with some of our other Eagle Spirit covers.
It fits most license plates measuring 7” x 4”.
The red light on the upper part of the frame
really finishes it off.
083016 License frame with light
Chrome/gold
F OR A RLEN N ESS
PRODUCTS
SEE SECTION
04-040
25
10300002_ZOD_H04_UK_41
1-9-2010
19:21
Pagina 041
Taillight Covers & Brackets, Headlight Bulbs
LICENCE AND TAILLIGHT
BRACKET FOR WIDE GLIDE FXWG
Perfect copy of the original equipment
license and taillight bracket. Stock
replacement for FXWG models, will also fit
all Zodiac and other aftermarket Fat Bob
rear fenders. Now available with Chromeplated finish or black painted finish
(OEM 59993-80).
160133 Chrome-plated
160139 Black finish
SPEED NUTS TAILLIGHT MOUNT
Mounting speed nuts for late model HarleyDavidson taillights used on all models from
1973 to present (OEM 7501), 10 pack.
348010 Speed nuts taillight mount
04
MINI LICENSE PLATE LIGHTS
With a diameter of only 5/8" and a length
of 3/4" these are the smallest license plate
lights on the market. Precision CNC
machined from Billet aluminum and mirror
shine polished. Can also be used as a speedo
or tacho light. Comes complete with bulb,
wire, 1/2” nut and rubber boot.Available in
your choice of grooved or smooth finish.
700482 Mini license plate light, grooved
700483 Mini license plate light, smooth
TAILLIGHT LENS SCREWS
Lens screws for late model Harley-Davidson
taillights used on all models from 1973 to
present (OEM 68026-73), 10 pack.
348009 Taillight lens screws
CUSTOM FAT BOB LICENSE AND
TAILLIGHT BRACKET
Zodiac offers a Fat Bob taillight bracket with
slotted mounting holes to allow a great
variety of Custom taillights to be installed.
Will fit the OEM style FXWG as well as the
Zodiac Fat Bob rear fenders.
160204 Taillight bracket
ADJUSTABLE TAILLIGHT
MOUNTING BRACKET FOR FAT
BOB STYLE FENDERS
Go all the way when finishing your Custom
wide fender, wheel and tire additions. This
fully adjustable, Chrome-plated bracket fits
all Fat Bob Style fenders from 7” up to
9” wide.A must when building Fat Tire Bikes.
160161 Chrome Custom taillight
bracket, adjustable
STUDDED LED LIGHTS
Very small LED lights that are fitted on a stud
can be used for many applications, for
example as a license plate light, instrument
light or any place else you can imagine.
These LED's come in bright shining clear, red
or amber and are fitted on a M6 threaded
stud.The 13 mm hex base fits flush on every
flat surface, and the light then sticks out as
little as 18 mm. These studded LED lights
can be used on every vehicle with a 12 Volt
system. Sold in pairs and come pre- wired.
167501 Clear
167502 Red
167503 Amber
BLUE HALOGEN H4 BULB
Installing this blue 12 Volt 60/55 Watt
H4 Halogen bulb gives your light that special
blue beam as now found on expensive cars.
Fits all “H4” marked headlight units. Extraordinary when used in our Diamond Cut
headlights!
160460 H4 bulb 12V 60/55W P43T
Daylight Blue
04-041
10300002_ZOD_H04_UK_042
29-9-2010
15:06
Pagina 042
Headlight Units & Headlight Bulbs
04
ZODIAC’S E-APPROVED H4
HEADLIGHT UNITS
These Zodiac headlight units come complete
with 12 Volt 60/55 Watt Halogen bulb,
12 Volt 5 Watt parking light and pre-wired
fittings. Lights are E-approved. The
5 3/4” (146 mm) units fits our Bates and
most other stock and aftermarket
5 3/4” lights. The 7” (178 mm) units fit all
FL and FLH models and many other stock
and aftermarket headlights.
160357 5 3/4" (146 mm) unit
165202 7" (178 mm) H4 unit
HELLA HEADLIGHT UNITS
Hella headlight units with EC/EU/TÜV
approval. Available for both 5 3/4” and
7” application for use with H4 halogen or
conventional bulb. The 5 3/4” unit fits our
Bates headlights and the larger 7” unit will
fit all FL and FLH models. Bulb not included.
237300 Headlight unit 5 3/4" H4 halogen,
with parking light
231867 Headlight unit 7" H4 Halogen,
with parking light
231866 Headlight unit 7" Conventional,
with parking light
04-042
SATURNUS H7 HEADLIGHT UNIT
Top-quality, EC approved head light unitsfor
use with a halogen H4 bulb. Come complete
with rubber socket cover. Very economically
priced European made quality product.
Available in 7”. Bulb not included. Fits FL
and FLH type headlights.
237885 Headlight unit, 7" for halogen
bulb
H4 BULB FOR HALOGEN
HEADLIGHT
Replacement bulbs for all H4 type light units.
Resistant to vibration and shock. Specially
designed and developed for motorcycle use.
231613 12 Volt 60/55 Watt H4 Halogen
light bulb, EU approved
160617 12 Volt 55/100 Watt
CHROME CUSTOM HEADLIGHT
This custom style headlight with its grooved
housing is made from tough and durable
ABS with a chrome finish. Features bottom
mount and a 4 1/2" E-approved headlight
unit. Comes complete with 12 Volt
60/55 Watt "H4" halogen bulb. Housing is
5" long and 5 3/4" in diameter.
160764 Chrome custom style ABS
headlight
160770 Replacement headlight unit
with bulb
ADJURE CUSTOM HEADLIGHT
HOUSINGS
These chrome plated custom style headlights
feature a bottom mount and are ready to
take your choice of 5 3/4" diameter head
light unit. Housings come complete with rim.
Available in racy flamed or silke smooth
style.
A. 731411
Flamed
B. 731412
Smooth
10300002_ZOD_H04_UK_043
29-9-2010
15:08
Pagina 043
Headlight Units & Headlight Bulbs
CUSTOM STYLE HEADLAMPS BY
ADJURE
Not just great looking, but a real
improvement in nighttime riding.The 7" and
5 3/4" diameter headlamp units use a
12 Volt 55/60 Watt H4 halogen bulb, 4 1/2"
diameter spotlight units come with 12 Volt
35 Watt H3 bulbs. These lights project a
string white beam uniquely directed by a
diamond shape reflector. Resulting in a
focused fan of light, eliminating the dark
center usually associated with the use of
halogen bulbs. These headlights are
designed specifically for use on motorcycles,
making installation simple and straight
forward. No modifications are required for
most models, but some Dressers and Road
Kings require hole enlargement in the stock
backing plate of the fairing. Bikes with
shallow headlight buckets may require
minor wiring modifications using the
supplied connectors. No special bulbs are
required; replacements are as close as your
favorite bike shop. Various styles are
available to complement the styling of your
motorcycle. Units are DOT approved.
04
Diamond Cut -Trillient Tri-Bar lens
731350 7" Head light unit, Blue dot
bulb cover
731405 5 3/4" Head light unit, Blue dot
bulb cover
731406 4 1/2" Spotlight units, Blue dot
bulb cover, pair
Diamond Cut Skull - smooth clear
lens
731410 7" Head light unit, translucent
Skull bulb cover
731409 5 3/4 Head light unit,
translucent Skull bulb cover
Iron Cross Wave Cut - smooth clear
lens
731414 7" Head light unit
731413 7" Head light unit with Skull
bulb cover
Pie Cut - smooth clear lens
731415 4 1/2" Head light unit, Bullet
bulb cover
731351 Replacement 12 Volt
60/55 Watt halogen H4 bulb
Note: Use of high power (100W) bulbs is
not recommended and will void warranty.
Diamond Cut - 3-line clear lens
731349 7" Head light unit
Wave Cut - Trillient Tri-Bar lens
731401 7" Head light unit, Black dot
bulb cover
731400 5 3/4" Head light unit, Black
dot bulb cover
731403 4 1/2" Spotlight units, Black
dot bulb cover, pair
Diamond Cut - smooth clear lens
731348 7" Head light unit, Ice bulb
cover
731404 5 3/4" Head light unit, Ice bulb
cover
731407 4 1/2" Spotlight units, pair
04-043
10300002_ZOD_H04_UK_44
1-9-2010
19:33
Pagina 044
Headlight Units & Headlight Bulbs
04
7" CUSTOM HEADLIGHTS
These Chrome-plated headlights feature a
facet cut reflector for a stronger beam and
give that true Custom Look.The faceted light
units are EU approved is available in your
choice of a hooded or non-hooded rim as
well as side or bottom mount for most
Custom applications. Housings are 7" in
diameter, light units are 6 1/2". All styles
come complete with a 12 Volt 60/55 Watt
H4 halogen bulb.
160510 Bottom mount, plain rim
160511 Bottom mount, hooded rim
160512 Side mount, plain rim
160439 EU/EC/TÜV approved light unit
only
231613 Replacement 12 Volt
60/55 Watt H4 halogen light
bulb
EU APPROVED CHROME BILLET
ALUMINUM HEADLIGHTS
The smooth looks of these Billet aluminum
head lamps add a touch of class to your front
end. Lamps feature a screw-in trim ring and
bottom mount bracket.Available in 5 3/4” or
7” diameter. Come pre-wired and complete
with EU approved lamp unit and 12 Volt
60/55 Watt H4 Halogen bulb.
160561 5 3/4" Chrome Billet headlight
160562 7" Chrome Billet headlight
231613 Replacement 12 Volt
60/55 Watt H4 halogen light
bulb
160357 5 3/4" Light unit with 12 Volt
60/55 Watt H4 halogen bulb,
EU approved
165202 7" replacement lamp unit
04-044
HYDRA-GLIDE STYLE HEADLIGHT
SHELL
Beautiful Chrome-plated headlight shell.
Can be used as OEM replacement on Harley
Big-Twins 1949 to 1959 as well as on later
Wide Glide front ends. Also usable for
Custom applications. Light-unit not
included. Use ZPN 237302/ 237303
(OEM 67701-49).
160004 Headlight shell with inner and
outer rim
160194 Rim (OEM 67726-48)
DANCER BILLET CHROME
HEADLIGHTS
Great looking headlights, manufactured
from billet aluminum with a show chrome
finish. The Moondancer and Sundancer are
an incredible 8" (20 cm) long and 5 3/4"
(14.6 cm) in diameter.The Raindancer is only
4 1/2" (11.4 cm) in diameter but still 7"
(17.8 cm) long. Lamps are pre-wired and
come complete with a SAE approved
Diamond Cut clear lens unit, 12V 60/55W
Halogen bulb and mounting block. Fit all
bottom mount applications.
A. 161204 Moondancer 5 3/4"
headlight
B. 161215 Sundancer 5 3/4" headlight
C. 161214 Raindancer 4 1/2"
headlight
LONG BODY BOTTOM MOUNT
6 1/4” HEADLIGHT
Newly designed bottom mount 6 1/4”diameter
long body headlight with 5 3/4”diameter light
unit. Is triple Chrome-plated, swivel mount, is
pre-wired, and comes complete with H4 unit
including 12 Volt 60/55 Watt halogen bulb.
Available with or without EU/TÜV approval.
Headlight shell is separately available.
160108 Complete 6 1/4” bottom mount
headlight
164001 Complete 6 1/4” bottom mount
headlight, TÜV/EU approved
160109 Headlight shell only
231613 Replacement 12 Volt 60/55 Watt
H4 hologen light bulb
160355 Unit only
160357 5 3/4" Light unit with 12 Volt
60/55 Watt H4 halogen bulb,
EU approved
SPRINGER HEADLIGHT
An exact replica of the original Springer style
head lamp as used on all models from
1936 thru 1954.A superb construction, just
like the original, ensures perfect fit of the
complete unit, or any of the available
replacement parts. Available in the original
style black painted finish with Chrome bezel,
or Chrome-plated.
Chrome headlight assembly
160041 12 Volt
160040 6 Volt (OEM 67701-35)
Black headlight assembly
160043 12 Volt
160042 6 Volt (OEM 67701-35)
166010 Trim ring only, chrome
(OEM 67713-35)
166014 Reflector only (OEM 67741-35)
160348 Rubber ring only, for 6 1/2"
headlight (OEM 67734-35)
165108 Lens only, for 6 1/2" headlight
(OEM 67731-35)
167384 Bulb only 6 Volt
(OEM 67750-35)
167386 Bulb only 12 Volt
160071 Socket with wires
10300002_ZOD_H04_UK_045
29-9-2010
15:09
Pagina 045
Headlight Units & Headlight Bulbs
04
GIUNONE HEADLAMP HOUSING
BY REBUFFINI
The Giunone headlamp housing is machined
from an impressive, 16 kilo weighing block
of solid billet aluminum. It has an integrated
visor and bottom mounts. comes complete
with 2 mounting blocks, one for use with
Rebuffini triple trees, the other one for stock
trees.Takes most 5 3/4" diameter head lamp
units.
746642 Polished
746643 Black
746644 Chrome
SPRINGER STYLE HEADLIGHT
LATE MODEL
An updated version of the original headlight
used on all models from 1936 thru 1954.
Fits all FXWG and Softail models from 1980
to present, as well as any Custom application
where a bottom mount headlight can be
used. Comes with a 12 Volt 55/100 Watt
halogen bulb and all necessary hardware.
160314 Complete headlight
160366 Head light housing only
746644 Reflector only, for 6 1/2”
headlight
160348 Rubber ring only, for 6 1/2"
headlight (OEM 67734-35)
166010 Trim ring only, chrome
(OEM 67713-35)
165108 Lens only, for 6 1/2" headlight
(OEM 67731-35)
160617 H4 bulb 55/100 Watt
231613 Replacement 12 Volt
60/55 Watt H4 hologen light
bulb
CUSTOM LOWERED SPRINGER
5 3/4” HEADLIGHT
This Custom headlight was designed
primarily for use on the Springer Softail, but
can be installed wherever 5 3/4” bottom
mount headlights are used. Mounts the
headlight 2 1/2” lower than a typical bottom
mount headlight. Light unit must be ordered
separately.
160031 Custom lowered Springer
5 3/4” headlight
CHROME SPRINGER STYLE
HEADLIGHT, LATE MODEL WITH
GROOVES AND VISOR
Bottom mount springer style headlight.
Features grooved shell and rim with built-in
visor. This stylish headlight comes complete
with a 12 Volt 60/55 Watt “H4” halogen
bulb and is pre-wired. Available in 6” with
and 6 1/2” without EU/EC/TÜV approval.
Beautifully Chrome-plated and usable for
many Custom applications.
160159 6 1/2” grooved headlight,
complete
160350 6” grooved headlight, complete
with EU/EC/TÜV approved light
unit
160357 5 3/4" Light unit with 12 Volt
60/55 Watt H4 halogen bulb,
EU approved
160355 Unit only, for 6" headlight
160349 Reflector only, for 6 1/2”
headlight
165108 Lens only, for 6 1/2" headlight
(OEM 67731-35)
160348 Rubber ring only, for 6 1/2"
headlight (OEM 67734-35)
231613 Replacement 12 Volt
60/55 Watt H4 hologen light bulb
5 3/4" HEADLIGHT SHELL
Beautifully Chrome-plated replacement
headlight for Harley FX 1975 to present and
XL 1974 to present. Fits to the original
mounting bracket.
160018 Headlight shell
(OEM 67705-74)
160011 Rubber vibration ring
(OEM 67719-63)
160012 Chrome ring (OEM 67725-63)
04-045
10300002_ZOD_H04_UK_46
1-9-2010
19:40
Pagina 046
Headlight Units & Headlight Bulbs
04
CUSTOM BOTTOM MOUNT 5 3/4”
HEADLIGHT ASSEMBLIES AND
TRIM RINGS
These 5 3/4” headlight assemblies will put
a “fresh face” on any bike that can run a
bottom mount headlight. Two innovative
trim ring designs will transform the
appearance of the complete headlight. The
complete headlight unit comes with a flat
lens halogen lamp, including a 55/60 Watt
bulb and is available with or without EU/TÜV
approval. The trim rings are separately
available and include a thick rubber gasket
for a nice, tight seal against the elements.
160318 Headlight assembly with
smooth rim
164002 Headlight assembly with
smooth rim, EU approved
160325 Headlight assembly with
dimpled rim
164003 Headlight assembly with
dimpled rim, EU approved
160258 Smooth rim with gasket
TORPEDO STYLE HALOGEN
HEADLIGHT
Custom headlight for bottom mount
applications has a perfect chrome finish.
Features 4 1/2" diameter E-marked all clear
lens and diamond cut reflector, parking light
and 12V 35/35W H4 halogen bulb. Outer
diameter and over all length are both 5 1/2"
(14 cm). Comes with bulbs and is pre-wired.
161004 Torpedo style headlight
04-046
3 1/2" BOTTOM MOUNT
HEADLIGHT
A very small headlight for any Custom
project. Features Chrome-plated bottom
mount housing and rim, EU approved lamp
unit and comes complete with a 12 Volt
60/55 Watt "H4" halogen bulb.
160514 Complete bottom mount
headlight, EU approved
160672 Replacement light unit, EU
approved
231613 Replacement 12 Volt
60/55 Watt H4 halogen light
bulb
BEEFY 5 3/4" HEADLIGHT TRIM
RINGS
Finally there is an affordable alternative to
give your stock or Bates headlight that beefy
stretched look.This Chrome-plated rim adds
depth to your headlight which gives a classic
hot rod look. Does not fit with headlamp
visor.
160341 Beefy trim ring fits 1996 to
present XL 1200 Custom and
XL 883 Custom models,1993 to
present FXSTS, FXSTSB and
FLSTS models
160342 Beefy trim ring fits 1963 to
present XL models (except XL
1200C and XL 883C models),
also fits our Bates headlights as
well as most other 5 3/4”
headlights.
CHROME LONG BODY BOTTOM
MOUNT 4 1/2" SPOTLIGHT
These 4" long body spotlights provide the
popular stretched look. Housing has bottom
mount for easy fitment on crash bars, light
bars or any other Custom mount. Comes
with 4 1/2" light unit available with or
without EU approval. Includes 12 Volt
55 Watt H3 halogen bulb, has swivel stud
mounting bracket and is pre-wired.
160083 Complete 4 1/2" spotlight
164008 Complete 4 1/2" spotlight, EU
approved
160197 Shell only
160195 Replacement light unit with
bulb, EU approved
167394 Replacement bulb, H3 12 Volt,
55 Watt, halogen
10300002_ZOD_H04_UK_47
1-9-2010
19:44
Pagina 047
Headlights & Spotlights
04
5 1/2" CHROME BATES
HEADLIGHTS
Complete assembled, Show-Chromed,
Custom style headlights with bottom or side
mount. The ultimate headlight for any
Custom builder. Lights come complete with
hardware, available in three models light
unit. One with a conventional 12 Volt
40/45 Watt Bulb (bulb not included), one
with a unit that includes a highpower 12 Volt
100/55 Watt H4 halogen bulb, or one with
a EU approved light unit that is complete
with 12 Volt 60/55 Watt H4 halogen bulb.
Complete headlights
160285 Bottom mount for conventional
40/45 Watt bulb
164004 Bottom mount with light unit
12 Volt 60/55 Watt halogen
bulb, EU approved
160287 Bottom mount with 12 Volt
100/55 Watt halogen bulb
160286 Side mount for conventional
40/45 Watt bulb
164005 Side mount for conventional
40/45 Watt bulb, EU approved
160288 Side mount with 12 Volt
100/55 halogen bulb
Replacement parts
160000 Bottom mount headlight shell
160003 Side mount headlight shell
160039 Rim only (fits bottom and side
mount)
165082 Light unit, for use with
H4 halogen bulb
160357 5 3/4" Light unit with 12 Volt
60/55 Watt H4 halogen bulb,
EU approved
231613 Replacement 12 Volt
60/55 Watt H4 halogen light
bulb
CHROME 4 1/2" EARLY MODEL
SPOTLIGHT
One of our most popular auxiliary spot lights
is now available with "EU" approved light
unit. Features swivel stud mounting, comes
pre-wired and complete with “H3” 12 Volt
55 Watt halogen bulb.
160045 Complete drive light EU/TÜV
approved
160001 Shell only
160195 Replacement light unit with
bulb, EU approved
167394 Replacement bulb, H3 12 Volt,
55 Watt, halogen
4" DUAL BEAM "H4" DRIVE LIGHT
Custom style Chrome-plated drive light. Has
EU/TÜV approved lens and comes complete
with a 12 Volt 60/55 Watt dual beam "H4"
Halogen bulb.Available in bottom mount or
side mount. Lights come pre wired. Sold
each.
160450 4" Side mount "H4" drive light,
TÜV/EU approved
160451 4" Bottom mount "H4" drive
light, TÜV/EU approved
231613 Replacement 12 Volt
60/55 Watt H4 halogen light
bulb
AUXILIARY LIGHTS WITH
DIAMOND CUT REFLECTOR
The unique diamond style faceted reflectors
in these lights not only give a very clear and
concentrated beam but also give your bike
a very classy Custom look. The clear lenses
are EU/TÜV approved. Lights are 4 1/2” in
diameter and come pre-wired, complete
with a “H3” 12 Volt 55 Watt halogen bulb.
These lights are available with three
different design housings: early style
spotlight, late style spotlight, and drive light.
160607 Early style spotlight
160605 Late style spotlight
160606 Drive light
167394 Replacement bulb, H3 12 Volt,
55 Watt, halogen
EU/TÜV APPROVED CHROME 4 1/2"
LATE MODEL SPOTLIGHT
A Chrome-plated reproduction of the late
model spotlight as fitted on the 1962 to
present FL models with EU/TÜV approved
light unit. Comes pre-wired and complete
with "H3" 12 Volt 55 Watt halogen bulb.
160047 Complete spotlight EU/TÜV
approved (OEM 68652-64B)
160062 Spotlight Shell only
160070 Rim only (OEM 68752-62)
160195 Replacement light unit with
bulb, EU approved
167394 Replacement bulb, H3 12 Volt,
55 Watt, halogen
04-047
10300002_ZOD_H04_UK_048
29-9-2010
15:10
Pagina 048
Headlights & Spotlights
04
CHROME 4 1/2" MINI DRIVE
LIGHT
Designed for extra lightning on the safety
bars. Light has high beam indicator and is
available with light unit that includes a
12 Volt dual beam bulb, or EU approved light
unit with 12 Volt 55 Watt H3 halogen bulb.
Light has swivel stud mounting bracket and
is pre-wired.
160289 Drive light complete
164006 Drive light complete, EU
approved
160001 Shell only
160029 Unit with bulb
167377 Bulb, 12 Volt dual beam
160195 Replacement light unit with
bulb, EU approved
167394 Replacement bulb, H3 12 Volt,
55 Watt, halogen
HEADWINDS HOODED
HEADLIGHTS HOUSING
These beautiful Custom headlight housings
are made of thick aluminum sheet to ensure
they remain rigid after the grooves are
milled. The lamp is slightly recessed for a
hooded appearance and is held in position
using a threaded ring, so there are no
exposed rivets or bolts. Also the Billet
aluminum mounting bracket is attached to
the housing, so a very clean look is achieved.
The standard bracket position fits 1980 thru
1986 FXWG and 1984 to present FXST
models with the 3/4” wide mounting block
(not included). These Headwind headlights
are available in three diameters/types being
4 1/2” spotlight, 5 3/4" headlight and 7"
headlight, in your choice of highly polished
or Chrome-plated finish. Light units are not
included and must be ordered separately.
4 1/2” spotlight housing
238127 Polished
238128 Chrome
238141 Seal beam unit 12 Volt
60/60 Watt
EXTENDED LOOK TRIM RING FOR
7" HEAD LIGHT
This chrome plated headlamp trim ring is
longer than the stock trim ring, adding that
extended, beefy look to your headlamp. Fits
all 7" head lights as used on 1983 to
present FLH and FLT series models (except
Tour Glide and Road Glide) as well as bikes
equipped with accessory head light nacelle
such as ZPN 237336.
231662 Beefy 7" head lamp trim ring
(OEM 69627-99)
04-048
5 3/4” headlight housing
238131 Polished
238132 Chrome
7” headlight housing
238137 Polished
238138 Chrome
4 1/2" LATE SPOTLIGHT
Chrome-plated reproduction of the late
model spotlight, fits FL models 1962 to
present. Complete light includes light unit
with bulb and is pre-wired. Available with
unit with or without EU approval.
160290 Spotlight complete
(OEM 6865264B)
160047 Complete spotlight EU/TÜV
approved (OEM 68652-64B)
160062 Spotlight Shell only
160070 Rim only (OEM 68752-62)
4 1/2" EARLY STYLE SPOTLIGHT
Chromed reproduction spotlight for HarleyDavidson, in the long obsolete 1938 thru
1961 style. Now offered in a 12 Volt and
6 Volt version. Light is faithful to the original
design, with toggle switch and clamp. So
accurate in design that any of the
components can be used for restoration of
the original spotlights.
160046 Complete spotlight 12 Volt
(OEM 68649-64)
160034 Complete spotlight 6 Volt
(OEM 68650-38)
165102 Clear glass lens
(OEM 68660-38)
166012 Reflector only (OEM 68676-38)
167378 Replacement bulb 12 Volt
(OEM 68715-64)
167380 Replacement bulb 6 Volt
(OEM 68715-49)
10300002_ZOD_H04_UK_049
29-9-2010
15:12
Pagina 049
Headlights & Spotlights
04
HEADWINDS "VIKING" HOODED
5 3/4" HEADLIGHT HOUSING
This 5 3/4" Viking headlight has the same
sparkling features as the Grooved Hooded
headlight, but with a different groove
pattern on the shell. Mounting block and
light unit not included but must be
purchased separately.
238133 Polished finish
238134 Chrome finish
HEADWINDS "WARRIOR"
ALUMINUM HOODED
HEADLIGHT HOUSING
Another 5 3/4" headlight shell as an
addition to the line of hooded aluminum
headlights.The groove pattern on the lower
part of the shell gives the headlight a more
aggressive look. Mounting block and light
unit not included.
238144 Polished finish
238145 Chrome finish
HEADWINDS ALUMINUM
GROOVED HEADLIGHT HOUSING
Standard style 5 3/4" headlight housing,
made of thick aluminum sheet, with
horizontal grooves. Lamp is held in position
using a split clamp ring. It is bottom
mounted to the standard 3/4” wide HarleyDavidson mounting block. Available in a
polished or Chrome finish. Mounting block
and light unit is not included but must be
ordered separately.
238129 Polished
238130 Chrome
HEADWINDS "MARIAH"
ALUMINUM HEADLIGHT
HOUSING
This 5 3/4" headlight is constructed as the
hooded headlight, but with a visor cut into
the housing. Very sleek and very clean.
Horizontal grooved for the finishing touch.
Mounts to standard 3/4” wide mounting
blocks. Available in a Chrome or polished
finish. Light unit and mounting block not
included.
238135 Polished finish
238136 Chrome finish
TRI-BAR LIGHT UNITS
These light units are available in 5 3/4" and
7" . Both lamps feature clear glass and fluted
Chrome-plated reflectors. The 7" model has
a flat glass, the 5 3/4" model has a convex
shaped lens.The three lug pattern is designed
for easy installation with any Headwinds
headlight bucket, and the three metablades
of the design are securely joined at the center
of the light. Bulbs are separately available.
RBS XENON ALUMINUM
HEADLIGHTS
The Bi-Xenon light technology is normally
only found on the "hi-end" and expensive
cars. RBS now makes very small size billet
aluminum Bi-Xenon headlight kits offer
maximum light exploitation. It is impossible
to explain the difference between an
“ordinary” light and this state of the art
system in print, but you will admit that
Xenon is the brightest light you have ever
seen as soon as you switch it on. RBS BiXenon headlights are available with a
polished or black anodized finish.
Installation of these headlights does not
require any modifications of your bikes
electrical system. Headlights come complete
with lamp unit, Bi-Xenon light and Xenon
controller unit, and a bottom mount
mounting bracket that fits most applications.
For use on V-Rod models a seperate
available optional mounting bracket is
needed.
722295 Polished aluminum headlight
kit
722461 Black anodized aluminum
head-light kit
722460 Polished V-Rod bracket
744299 Black V-Rod bracket
238209 Tri-Bar unit 5 3/4" with convex
lens
238210 Tri-Bar unit 7" with flat glass
238211 Replacement bulb for Tri-Bar light
unit
04-049
10300002_ZOD_H04_UK_50
1-9-2010
19:57
Pagina 050
Headlights, Trims, Mount Blocks & Visors
04
EMBOSSED EAGLE VISORS
These Chrome-plated steel visors feature a
highly detailed embossed eagle emblem.
160251 5 3/4" headlight visor, fits
Bates style headlights
160252 7" headlight visor, fits
aluminum or steel FL headlights
160253 Turn signal visor set, fits FL style
turn signals 1963 thru 1984
BILLET ALUMINUM HEAD LAMP
KITS FOR V-ROD
These double-eye headlamps add an
aggressive Streetfighter look to your V-Rod.
The Bullet style housings are made from
billet aluminum. One lamp is used as Low
beam, the other as High beam. Available as
Ellipsoid style with the extraterrestrial
looking pop-eye lamp units or
4 1/2” diameter flat glass lamp units. These
complete and ready-to-install kits come
complete with lamp units, 12 Volt 55 Watt
H3 Halogen bulbs and mounting bracket
that bolt straight onto the V-Rod triple tree.
Lamps and brackets are mirror shine
polished.
722293 Flat glass style
722294 Ellipsoid style
HEADWINDS MOUNTING BLOCKS
Show Chrome Billet aluminum headlight
mounting blocks. Mounting blocks are
available in Custom, FLST and FXWG style.
A. 721333 FLST headlight mounting
block
B. 721334 FXWG headlight mounting
block
C. 721335 Custom headlight mounting
block
SPOTLIGHT BRACKET SET
Fits all FL type Wide Glide forks. Chrome
finish (OEM 68603-62 & 68604-62).
160172 Spotlight bracket set
04-050
HEADWINDS ALUMINUM NACEL
BEZEL FOR 7" HEADLIGHTS
Give your FLH model front end a longer look
by replacing the nacelle ring with this
aluminum nacelle bezel. Looks great with
the hooded 4 1/2" spotlights or the 5 3/4"
hooded headlights (if used as spotlights).
238140 Nacelle bezel, Chrome
ELLIPSOID BILLET ALUMINUM
HEAD LAMPS
Extra terrestrial looking headlamps to add
that Streetfighter look to your Custom
project. Bullet style housings made from
Billet aluminum. One lamp is used as Low
beam, the other as High beam. Lamps are
sold in pairs, and come complete with popeye lamp units with 12 Volt 55 Watt
H3 Halogen bulbs. The separate available
mounting bracket allows installation on
most Wide Glide triple trees. Lamps and
brackets are available in mirror shine, or
black coated finish.
722277 Head lamp set, polished
722278 Head lamp set, black
722279 Mounting bracket, polished
722280 Mounting bracket, black
10300002_ZOD_H04_UK_51
1-9-2010
20:01
Pagina 051
Headlights, Trims, Mount Blocks & Visors
04
CRIME SCENE CHOPPERS RAPIDE
HEADLIGHT
Crime Scene Choppers found their
inspiration for the design of the Rapide
headlight in vintage sports cars and hot
rods. All Rapide parts share a common
design theme with the grill and raised
scallops, giving your bike a balanced look
from front to back.They look fast just sitting
on the workbench, imagine how they will
look on your bike! All Rapide parts are
available in a variety of finishes, including
chrome, two-tone satin/polished aluminum
with a polished brass grill, and a black
powder coat with high-lighted grill bars.
These parts, like everything Crime Scene
Choppers makes, are 100% hand made in
the USA.The Rapide headlight is a small and
stylish headlight, approx. 5" (13 cm)
tall x 5 1/2" (14 cm) wide and 5" (13 cm)
deep, that looks awesome on a vintage
styled bike. It uses a 4 1/2" (not included)
triple halogen lamp unit with 225 watts of
penetrating candlepower. This unit has a
polished aluminum mounted base that
holds three 12 Volt halogen lamps.All three
lamps are rated at 75 watts. The two used
for the low beam are a wide beam, the high
beam is a narrow 12 degree spot. The
headlight comes complete with the hand
finished body and grill, stainless hardware,
mounting base, gasket and wiring harness.
743333 Rapide Headlight,
Satin/polished body and
polished brass grill
743334 Rapide Headlight, all chrome
743340 Rapide Headlight, black
powder coat with highlighted
grill bars
LIGHT VISORS
Beautifully Chrome-plated visors in all
popular sizes. Give your lights that
‘distinctive’ look. Easy to install.
160123 Light visor for Bullet lights
(OEM 67785-78T)
160121 Light visor for 4 1/2" Spot
lights (OEM 67783-78T)
302012 Light visor for 5 1/2" Bates
lights (OEM67750-88T)
160232 Light visor for Harley-Davidson
FL-FLH 7" light
(OEM 67752-77T)
HEADLIGHT VISOR
Super Chromed as it is always ‘out-front’ for
everyone to see.Will fit Sportster, FX en FXR
models thru present. Available with and
without indicator holes.
301705 Stock replacement for models
with indicator lights
(OEM 67809-75)
301706 Stock replacement for models
without indicator lights
(OEM 67809-70 & 67805-86)
743338 4.5" laser lamp, includes
3 halogen bulbs and wiring
harness
HEADLIGHT VISOR COVER
Chrome-plated steel cover. Fits over the
stock headlight visor of all Sportster and
Superglide models. With and without
cutaway for the indicator lights (does not fit
FXWG).
302002 With cutaway
(OEM 67871-85T)
302003 Without cutaway
(OEM 67884-90T)
04-051
10300002_ZOD_H04_UK_52
1-9-2010
20:05
Pagina 052
Headlight Brackets
04
CHROME HEADLIGHT VISOR
A die-cast "Eyebrow" that will dress up your
motorcycle with lustrous Chrome. Features
four holes for indicator lights. Fits Sportster,
FXR and Dyna models 1986 thru
1991 (OEM 67805-86A & 67863-90).
301235 Chrome headlight visor
FLH BOTTOM MOUNT BRACKET
Custom designed Chrome-plated headlight
bracket for all FL models 1949 thru 1984.
Provides clean and secure support for Bates
style headlights. Also usable for many
Custom applications.
160206 Headlight mounting bracket
BOTTOM MOUNT BRACKET
Chrome-plated universal headlight bracket,
mounts all bottom mount headlights.
Mounting holes are slotted to fit most front
lower pinch bolts.
301165 Bottom mount bracket
DUAL BOTTOM MOUNT BRACKET
Show-Chromed universal dual headlight
bracket. Bolts to most stock stem pinch
bolts. With 5/16" slotted mounting holes.
160103 Dual Bottom mount bracket
LOWERING BRACKET
Chromed lowering bracket for easier
headlight adjustment when extending your
front ends. Fits FX and XL 1971 to present.
160112 Lowering bracket
HYDRA GLIDE HEADLIGHT
MOUNT
Fits Big-Twin models 1949 thru 1959 and
all Wide Glide Forks. Chrome finish
(OEM 67810-48).
160114 Hydra Glide Headlight mount
BOTTOM MOUNT BRACKET
Universal ‘narrow’ Chrome-plated headlight
bracket. Bolts to most front lower pinch
bolts. 130 mm center. Slots are 37 mm.
160129 Bottom mount bracket
FXWG MOUNTING BRACKET
Chrome-plated OEM replace-ment bracket
complete with mounting hardware. Fits
1980 thru 1985 FXWG and 1984 thru
1985 FXST models (OEM 67773-80).
160207 Mounting bracket
04-052
FXWG MOUNTING BRACKET
Super Chrome-plated classic head lamp
mounting bracket for 1980 and later FXWG
and FXST front ends. No drilling or tapping
required.
160128 FXWG Mounting bracket
10300002_ZOD_H04_UK_53
1-9-2010
20:09
Pagina 053
Headlight Brackets
RSD "NOSTALGIA" HEADLIGHT
RELOCATION BRACKET
Roland Sands Designs "Nostalgia"
headlight relocation bracket, made from
polished stainless steel. It relocates the
headlight to the lower shock mount on
Springer forks for a more streamline look.
Fits all shock absorber equipped Springer
forks. Mounting hardware included.
740688 Nostalgia headlight relocation
bracket
IGNITION SWITCH WITH ROUND
KEYS
These switches use the round digit keys as
introduced on the Dyna Glides. They come
in two versions, one with 2 positions
"On-Off" the other with 3 positions
"Off-On-Light" Both switches are exact
replicas of the OEM switches.
370131 Ignition switch 2 positions
(OEM 71428-90A)
370130 Ignition switch 3 positions
(OEM 71427-94)
IGNITION SWITCH
Chrome-plated ignition switch, stock
replacement for FX models 1973 thru
1977 and XL 1975 thru 1977. Can also be
used as replacement on later FX(R) and
Sportster models (OEM 70124-75).
370090 Ignition switch
04
IGNITION SWITCH FOR FAT BOB
MODELS
Show-Chromed ignition switch which
replaces the early and late style OEM switch
as used on Harley Fat Bob dashes 1936 and
later.
370050 5 Post switch, 1936 thru 1972
(OEM 71500-36TA)
370032 6 Post switch 1973 to present
(OEM 71501-73T)
ELECTRONIC IGNITION SWITCH
Exact duplicate of the late model
ignitionswitch. Updated to the smooth
action and super dependability of total
electronic switching without the troubles of
the pole to bar one.Vibration and corrosion
resistant. Fits all 1936 to present models
(71501-73T).
233570 Electronic ignition switch
THREE-WAY IGNITION SWITCH
Very popular as OEM replacement as well
as for universal use. Has "off", "ignition"
and "light" position.
370048 Three-Way Ignition Switch
WIRE PLUS SWITCH HOUSINGS
Billet chrome switch housings, available in
Winged and Semi-elliptical. They mount to
most FXR style top motor mounts with
unthreaded mounting holes and accept a
1996 to present Fat Bob style ignition
switch.
A. 731936 Winged switch housing
731937 Winged switch housing
including momentary start
switch and latching hi/low
switch
B. 731938 Semi-elliptical housing
USA MADE IGNITION SWITCH
A top quality three position replacement
ignition switch from Standard Motor
Products Inc. with the late style round keys.
Fits all 1996 to present Softail models
(OEM 71313-96).
700557 Ignition switch
04-053
10300002_ZOD_H04_UK_54
1-9-2010
20:13
Pagina 054
Switches & Brackets
04
IGNITION SWITCH AND
LOCKABLE SCREW-IN GAS CAP
KITS
Handy kits with an ignition switch and
lockable gas caps reduce the number of keys
on your ring as one key fits both the gas
caps, as well as the ignition switch. The
lockable gas caps with ribbed sides and
show quality chrome finish.The lock system
prevents for the gas caps coming loose with
the engine running. Fits all 1982 to present
models dual screw-in style caps, except
those with a fuel level gauge. Available in
your choice of mechanical or electronic
ignition switch.
011924 With 6 post mechanical ignition
switch
011923 With 6 post electronic ignition
switch
WIRE PLUS IGNITION SWITCH
WITH STARTER MOTOR
FUNCTION
Weatherproof ignition switch, which has,
just like in most cars, a turn and jump-back
starter motor engaging function. Comes
with one hooded key, one normal flat key
and installation instructions. Designed for a
maximum power of 12Vdc-20A, 24Vdc-10A.
731946 Weather proof ignition switch
IGNITION SWITCH BRACKET
Mounts FX and universal switches.
301186 Chrome-plated
TRANSMISSION MOUNT SWITCH
PLATE FOR 4 SPEED MODELS
Mounts FX style switches to transmission.
301222 Chrome-plated
CHOPPER IGNITION SWITCH
ASSEMBLY WITH WELD-ON
HOUSING
Housing is designed to be welded on to
1 1/2" tubing but can be modified for use
with other diameter tubing. Kit includes
weld-on housing and a sealed, water tight
switch with built-in starter relay.
236058 Chopper ignition switch
assembly
04-054
IGNITION SWITCH COVER
This handy Chrome-plated cover cleans up
and covers the switch face, bracket, body
and wires. Solid steel construction. Put this
cover over your stock ignition switch. Fits all
Sportster models from 1972 thru
1987 (OEM 71510-72).
301874 Ignition switch cover
CHROME RE-LOCATION IGNITION
SWITCH COVER
This Chrome ignition switch cover is a must
when you relocate the ignition switch on
your Sportster or Big Twin. It covers the
unfinished bottom end of the ignition switch
for a cleaner appearance.
370060 Custom ignition switch cover
MW BILLET IGNITION SWITCH
HOUSINGS
Polished Billet aluminum ignition switch
housings. V shaped housings come with
3 slots on each side for beauty. Designed to
take a 1973 thru 1993 style ignition switch.
This ignition switch housing is designed for
use with all MW top motor mounts (top
motor mount not included). Will also fit
1991 to present OEM or OEM style 2 piece
top motor mount when MW's adapter ZPN
710413 is used.
710412 Billet ignition switch housing
710413 Adaptor for 2 piece OEM style
top motor mount
10300002_ZOD_H04_UK_55
1-9-2010
20:17
Pagina 055
Switches
04
STARTER SWITCH BUTTONS
Heavy-Duty quality starter switch buttons
for your Custom project, available with
round or square housing.
721750 Starter switch button, round
721751 Starter switch button, square
OLD STYLE PUSH BUTTON
SWITCH
Pre-wired Horn/Starter button switch for
V-Twins 1929 to 1972 (OEM 71800-26TA).
370008 Chrome-plated
OLD STYLE HANDLEBAR SWITCH
Hi-Low or Turn-light switch for all models
1929 to 1972. Mounts to 1" handle-bars
(OEM 71840-29T).
370031 Chrome-plated pre-wired
OLD STYLE HANDLEBAR
SWITCHES AND SCREWS
These Chrome-plated old style handlebar
switches are made exactly to the old design,
you even have to solder the wires to the
switches. Can be mounted on both our old
style springer handlebars as well as any
1” handlebar. The push button switch can
be used for horn or starter, the high/low
dimmer switch for the headlight. Screws
come in sets of 4 to mount switches on all
springer handlebars.
720082 Push button switch, pre-wired
(OEM 4760-26NC &
71800-26TA)
720083 High-Low headlight switch
(OEM 4760-29NC &
71840-29T)
720084 Screws, set of 4
(OEM 020 & 1052)
UNIVERSAL TOGGLE SWITCHES
Made by Standard Motorcycle Products, these
toggle switches make Custom connections
easier.Available in 5 versions for use in almost
any application.
A. 722010 Universal 3 position ON-OFFON weather proof toggle
switch with 16 gauge wires.
Fits panels up to 13/16"
thick. 12 Volt 25 Amp. rating.
B. 722011 Universal, 2 position ON-OFF
plastic toggle switch with
1/4" spade type connectors.
12 Volt 10 Amp. rating.
HEAVY DUTY SAFETY TOGGLE
These switches feature a red shroud, which
needs to be lifted to activate the switch.The
shroud also turns off the switch when
flipped back into the closed position. These
heavy duty 20 Amp. ON-OFF switches are
commonly used for “protected” switch
systems such as for example Nitrous Oxide
Systems.
370320 Heavy Duty 12V 20 Amp. Safety
toggle switch.
C. 722012
D. 722013
E. 722014
Universal, 2 position ON-OFF
sealed thermoplastic toggle
switch with 1/4" spade type
connectors. 12 Volt 35 Amp.
rating.
Universal, heavy-duty
2 position ON-OFF toggle
switch with OFF-ON face
plate and 2 screw terminals.
12 Volt 20 Amp. rating.
Universal, 3 position ONOFF-ON toggle switch with
three 1/4" spade type
connectors. 12 Volt 35 Amp.
rating.
04-055
10300002_ZOD_H04_UK_56
1-9-2010
20:20
Pagina 056
Switches & Wiring
04
ROCKER SWITCHES
MSD LOCKING WATERPROOF
ON/OFF SWITCH
A waterproof single-pole, single-throw
switch with a locking handle.To release the
toggle, lift the handle to move it to the other
position. It's a great switch for racing
- it prevents accidental switching. Rated
10-amps at 28 Volt.
711834 Locking waterproof On/Off
switch
EXTENDED HANDLEBAR WIRING
HARNESSES
These 48" long wiring harnesses will replace
the original equipment parts and permit the
installation of taller handlebars.They feature
the correct gauge wires which are colorcoded and then enclosed in vinyl casings.
The early kit has a black casing and includes
14 connectors and 3 terminals.The late style
kit has a gray casing and contains
14 connectors and 4 handlebar wiring
retainer clips.
175122 Fits all models from 1973 thru
1981
370110 Fits most models from 1982 to
1995
A. 370025 Rocker switch Run/Off
(OEM 71547-75)
B. 370030 Rocker switch plain
(OEM 71483-72)
C. 370029 Rocker switch Hi/Low
(OEM 71546-75A)
BUTTON SWITCHES
HANDLEBAR SWITCH HOUSING
Switch housing for use with 1972 thru
1981 handlebar controls. A perfect item for
serious Custom builders. Chrome finish.
370129 Handlebar switch housing
A. 370026 Button switch for starter,
horn, turn signal
(OEM 71484-72)
B. 370027 Button cap short
(OEM 71534-72) (10 pack)
C. 370028 Button cap long
(OEM 71535-72) (10 pack)
HANDLEBAR SWITCH HOUSING
Perfectly Chrome-plated reproductions of
original equipment.The switch housing will
accept both OEM or our rocker and button
switches. For those who want to relocate
their switches we offer a plain cover. Fits
Harley XL, FX, FXE and FL models 1972 thru
1981.
A. 231997 Vertical switch housing
(OEM 71539-73B)
B. 241253 Horizontal switch housing
(OEM 71539-72)
C. 231994 Plain housing
HANDLEBAR STOPLIGHTS
SWITCH
370020 Handlebar stoplights switch
(OEM 72001-69B).
SWITCH HOUSING DECAL KIT
6 Piece decal set for 1972 thru
1981 handlebar switch housing (10 pack)
500124 Switch housing decal kit
04-056
10300002_ZOD_H04_UK_57
1-9-2010
20:24
Pagina 057
Switches & Wiring
UNIVERSAL SWITCHES
Heavy-Duty switches for
applications.
Custom
370017 Universal push button switch,
half Chrome
370016 Universal dimmer-indicator
switch, Chrome
HANDLEBAR WIRING HARNESSES
WITH SWITCHES AND
HARDWARE
These handlebar wiring harnesses are
completely soldered together and ready to
install. The wires are 48” long, to fit the
tallest handlebars, and are color-coded to
match the OEM wires. They fit all Big Twin
and Sportster models from 1972 thru 1981,
and are available with either black or
Chrome switches and button caps. Kits come
complete with wire connectors, buttons,
screws, stop light switch rubber boot and
switch retaining plates, while the soldering
of the switches has already been done.
Available as a complete set and separate
sets for left and right side.
Black switches
370107 Complete set left & right
370109 Left side
370108 Right side
Chrome switches
237102 Complete set left & right
237101 Left side
237100 Right side
370092 Universal dimmer switch and
horn button, half Chrome
combined black symbols, or black with
white symbols in complete kits.According to
the latest European type approval
regulations switches with symbols must be
used on new motorcycles. Lettered switches
are also available individually. Kits include
wire terminals, mounting screws and
instructions. Available for 1996 thru
2006 models and 2007 to present models.
The 2007 to present version has an extra
switch on the clutch lever that operates the
clutch interlock system. Kits do not fit
models with radio controls.
04
Chrome with Black Lettering
370304 Complete kit
Individual Parts
700768 Left turn signal switch
(OEM 71598-96)
700766 Right turn signal
switch(OEM 71591-96)
700770 Horn and dimmer switch
(OEM 71597-96)
700764 Engine start and stop switch
(OEM 71589-96)
700772 Master cylinder stop light
switch (OEM 71590-96)
Individual Parts
700769 Left turn signal switch
(OEM 71598-96)
700767 Right turn signal switch
(OEM 71591-96)
700771 Horn and dimmer switch
(OEM 71597-96)
700765 Engine start and stop switch
(OEM 71589-96)
700772 Master cylinder stop light
switch (OEM 71590-96)
Chrome with combined Black
Lettering/Symbols
370318 Complete kit, fits 1996 thru
2006 models
370199 Complete kit, fits 2007 to
present models
MINI PUSH BUTTON SWITCH
This tiny little stainless steel push button
switch comes with a special radius shaped
spacer to allow mounting in handlebars.
Switch works for turn signal. Starter, horn,
kill or hi-low, must be used with a switch
relay. Requires a 9/32” hole and 5/16” UNF
nut. Switch is less than 1/2” in diameter and
sticks only 1/4” above the handlebar
surface. Of course you can also install this
switch on flat surfaces when you do not use
the radius shaped spacer. Installation
requires a 9/32" drill and a 5/16-24 UNF
tap. Switch comes with two 20” wires
installed.
370314 Push button switch
ERGONOMIC HANDLEBAR
SWITCHES FOR 1996 TO PRESENT
MODELS
These ergonomic switches are for use on
1996 to present bikes with the rounded
handlebar controls. The contoured switch
rockers provide easier operation and
improved recognition, even when wearing
gloves. Switches feature better water
resistance for improved reliability in wet
weather conditions. Switches come
completely pre-wired with color-coded 48"
long wiring harness for easy installation.
Available in Chrome with black lettering or
black with white lettering, Chrome with
Black with combined White
Lettering/Symbols
370317 Complete kit, fits 1996 thru
2006 models
370200 Complete kit, fits 2007 to
present models
Black with White Lettering
370300 Complete kit
04-057
10300002_ZOD_H04_UK_58
1-9-2010
20:28
Pagina 058
Switches, Housing & Wiring
Right side wire harness (OEM 70219-87)
233850 With black switches
233853 With Chrome switches
Dimmer/Horn switch (OEM 71597-92)
233840 Black
233845 Chrome
04
Right turn signal switch (OEM 71591-92)
233843 Black
233848 Chrome
HANDLEBAR SWITCHES
Complete wiring sets and switch assemblies for left and right side
of the handlebar switch housing, fits all Big Twin and Sportster models
1982 thru 1995.The wiring kits are color coded to match OEM wires.
Wires are made long enough for even the tallest handlebars. Not
only has the soldering been done, but all the hard to find wire
connectors, buttons and screws are included.Available as a complete
left and right kit, separate for one side only or per individual switch
assembly. The switches come in either black or Chrome version. All
switches are separately available, switch housings must be ordered
separately.
Left and right wire harness sets
233851 With black switches
233854 With Chrome switches
Left turn signal switch (OEM 71599-92)
233841 Black
233846 Chrome
Engine stop/start switch (OEM 71589-92)
233842 Black
233847 Chrome
Front stoplight switch (OEM 71590-92)
233844 Black (internal)
Chrome-plated switch housings
370122 Left top (OEM 71567-82)
370124 Left bottom (OEM 71568-82A)
370123 Right top (OEM 71564-82)
370125 Right bottom (OEM 71563-82A)
Left side wire harness (OEM 70218-87A)
233849 With black switches
233852 With Chrome switches
CHROME SWITCH HOUSING KIT
Chrome-plated reproduction of the Original Equipment handlebar
switch housings.Accepts both OEM and aftermarket switches without
re-wiring. Zodiac has two versions available, where others only supply
the latest. This latest version has extra holes in the left side switch
housing to accommodate for the Clutch Interlock system as
introduced on the 2007 models. We think you don't want a useless
hole in your chrome, so offer both "early" and "late" styles.
054001 Early style, fits 2002 thru 2006 V-Rod models and
1996 thru 2006 Sportster, Dyna, Softail (except
FXSTDSE) and FLHR Road King (except FLHRSEI) models
(OEM 70222-96)
370198 Late style, fits 2007 to present V-Rod models, 2007 to
present Sportster, Dyna, Softail (except FXSTDSE) and FLHR
Road King (except FLHRSEI) models (OEM 70222-96)
04-058
EXTENDED HANDLEBAR WIRING KITS FOR 1996
THRU 2006 MODELS
Color-coded 48" long wiring harness kit. Ideal for repairs or when the
original wiring is too short to mount your Ape hanger. To take the
guess out of your work these wires are identical color coded as
OEM equipment. Fits all 1996 thru 2006 models, except those with
radio controls.
370351 Extended handlebar wiring kit
10300002_ZOD_H04_UK_59
1-9-2010
20:31
Pagina 059
Switches, Wiring & Electrical
SCREWS FOR HANDLEBAR
SWITCH HOUSING ROCKER
SWITCH
Screws for rocker switches 6-32 x 1/2"
(OEM 2804W) (pack of 25).
370121 Screws for handlebar switchhousing
WIRE TERMINALS SWITCH
HOUSING
Wire terminals for brake-light switch in
handlebar switch housing (pack of 25).
370119 Wire termainals switch-housing
04
COMPLETE WIRING HARNESSES
Often Custom builders consider wiring a
motorcycle as a necessary evil. Today’s
Custom biker is fortunate, we can offer a
refined variety of Custom wiring
components that eliminates the majority of
wiring hassles.The complete wiring harness
includes key switch, flashers and circuit
breakers. It is ready to connect to your lights
and coil. Comes complete with instructions
and an easy to follow diagram. Side mount
harnesses
includes
side
mount
switch/electric box.
239413 Complete wiring harnesses
239414 Complete side mount wiring
harness for use with stock or
4 button switches
HANDLEBAR SWITCH RETAINING
PLATES
Retaining plate for button switches
(OEM 71533-72) (pack of 10).
370087 Handlebar Switch retaining
plates
HANDLEBAR SWITCH HOUSING
RETAINING SCREWS
Screws to mount the retaining plate for
button switches in the handlebar control
switch housings for all models 1972 thru
1981 (OEM 2803W) (pack of 25).
370120 Handlebar Switch housing
retaining screws
ELECTRICAL INSULATION TAPE
Soft black PVC insulation tape for the
professional. It can be used for insulation of
all electrical connection, is safe to use up to
9.0 KV, has high adhesive features and is
resistant to temperature changes. Tape is
0.15 mm thick, 15 mm wide and 10 meter
long. Sold in 10 packs.
239279 Insulation tape
RUBBER BOOT BRAKE LIGHT
SWITCH
Rubber boot for the brake light switch. Sold
in packs of 10 (OEM 27751-69P).
370086 Rubber boot brake light switch
04-059
10300002_ZOD_H04_UK_60
1-9-2010
20:35
Pagina 060
Wire Plus Wiring Systems
04
WIRE PLUS WIRING SYSTEMS
Wire Plus has been providing innovative
high quality products and reliable cutting
edge technology for powersports and
custom bike industry.Wire Plus offers a wide
range of self-diagnostic wiring systems to
fit any stock or custom application. All
systems feature Solid State breaker
technology (breakers that never have to be
replaced anymore). These components are
molded into an epoxy encapsulated module
that is waterproof and vibration resistant.
All systems feature onboard LED’s that
diagnose breakers, start circuits and
momentary switch functions. Connectors are
Deutsch weather proof for their small size
and reliability. Most systems include a
compact pre-assembled harness for ease of
installation.
FLAT SIDE TANK SYSTEMS
Flat side tank systems mount the power
control module under the ignition switch
between both flat side style gas tanks. This
system houses 3-15 Amp circuit breakers
and replaceable start relay including
diagnostic LED's. The module plugs into a
pre-assembled harness. Available in two
versions. Flat Side Tank Systems are
compatible with ZPN 731940 Auto Cancel
Module (sold separately).
731929 Harness for stock style
handlebar controls (with- or
without turn signals) and
separate 30A main breaker
731930 Harness for mini switches (withor without turn signals) and
separate 30A main breaker
731945 Harness for mini switches (withor without turn signals) and
integrated 30A main breaker
731931 Housing only, black anodized
04-060
AUTOMOTIVE MOTOR MOUNT
START SYSTEMS
Chopper style system with chromed billet
housing. Built in automotive style start
switch. Hidden built in switches for turn
signals, high-low beam and horn available
to provide a clean looking handlebar on any
chopper. Bolts directly to FXR style motor
mounts, without threaded mounting holes.
Designed to be used with Top Motor Mounts
brackets ZPN 731921 and ZPN 731922.
These brackets perform chromed billet
construction to relocate the stock coil and
adapt Wire Plus Motor Mount Housings ZPN
731918 thru ZPN 731920. Suits Twin Cam
coils and most new style coils without
electrical connections on the outer-ends
(Crane Hi-4, Dyna 2000i) Systems are
available in the configurations:
731920 Housing with automotive
ignition switch only
731918 Housing with automotive
ignition switch, wiring/
connectors, toggle for headlight
(low-off-high) and momentary
push button for horn
731919 Housing with automotive
ignition switch, wiring/
connectors, individual switches
(start, auto-cancel, hi/low and
horn) and auto cancel module
731946 Replacement automotive
ignition switch only, black
plastic construction, water
resistant
731921 Fits all Twin Cam and Evolution
style engines from 80 to 100ci
731922 Fits stroked Twin Cam and
stroked Evolution style engines
100ci and up
SEAT POST MOUNTED SYSTEMS
Systems include a chromed billet housing
that incorporates the power control module
and a 3 position ignition switch.The housing
mount directly to the seat post coil bracket
on 1941 thru 1984 Big Twins and many
custom frames using the same style coil
bracket. The power control module houses
3-15 Amp breakers, a replaceable start relay
and diagnostic LED's. The LED's can be
monitored through the 6 holes in the front
of the housing.The power module plugs into
a pre-assembled harness.All necessary wires
are included. Two versions available
depending on the style of switches used in
your application. Seat Post Mounted
Systems are compatible with ZPN
731940 Auto Cancel Module (sold
separately).
731923 Housing with harness for stock
style handlebar controls (with
or without turn signals)
731924 Housing with harness for mini
switches (with- or without turn
signals)
WIRE PLUS AUTO-CANCEL LOAD
EQUALIZER FOR TURN SIGNALS
The Wire Plus Auto-Cancel Load Equalizer is
a turn signal module that is a must when
converting from your OEM turn signals to
marker lights or LED's that draw less current
as stock turn signals. This is where the Wire
Plus module kicks in.The module is equipped
with a load equalizer, which is exactly what
is needed to return the amp draw to the
correct level. Fits all models with self
cancelling turn signals.
731940 Wire Plus auto-cancel load
equalizer
10300002_ZOD_H04_UK_61
1-9-2010
20:39
Pagina 061
Wire Plus Wiring Systems
04
AUTOMOTIVE MID FRAME START
SYSTEMS
This pre-assembled harness is configured for
an automotive style start switch. These
systems eliminate start circuit wiring in the
harness. The harness is equipped with a
solid-state breaker pack, breaker that will
never burn out, that measures approx.
1"x1". The breaker pack is molded in
waterproof epoxy.The harness also features
5 LED's for monitoring several functions.All
systems include the required wires
(including indicator and turn signal wires)
and installation materials. Automotive Mid
Frame Start Systems are compatible with
ZPN 731940 (sold separately).
731932 Harness for stock style
handlebar controls (with- or
without turn signals) and
integrated 30A main breaker
731933 Harness for mini control
switches (with- or without turn
signals) and separate 30A main
breaker
731934 Harness for stock style start
switch and stock style
handlebar controls (with- or
without turn signals) and
separate 30A main breaker
731935 Harness for stock style start
switch and mini control
switches (with- or without turn
signals) and integrated 30A
main breaker
731946 Replacement automotive
ignition switch only, black
plastic construction, water
resistant
SHIELD MOTOR MOUNTED
SYSTEMS
Systems provide a chromed billet housing
that mounts directly to most FXR style top
motor mounts. Featuring the same functions
as the Seat Post Mounted Systems. Shield
Motor Mounted Systems are compatible
with ZPN 731940 Auto Cancel Module (sold
separately).
731927 Housing with harness for mini
switches (with- or without turn
signals)
731928 Housing with harness for mini
switches (with- or without turn
signals), start & hi-low switches
and latching module mounted
in billet housing
WIRE+ CLASSIC STYLE SEAT POST
WIRING SYSTEM
A complete wiring harness for custom bikes.
Has color coded wiring to make an easy job
out of connecting headlight, taillight, turn
signal, horn, indicators, starter motor and
so on. Comes with a billet chrome housing
that attaches to the seat post for a clean
custom look. Designed for use with
aftermarket handlebar control switches,
such as PM "Contour", Zodiac's own ZCP
Custom Controls, Ness "Petite" and almost
any other kind of switches equipped with
momentary push buttons. The billet chrome
housing incorporates a car-style ignition
switch, which has, like in most cars, a turn
and jump-back starter motor function. You
will also find the starter relay, main harness
plug and a 15 Amp fuse in the housing.
Comes complete with an easy to follow
installation instruction.
731947 Wire Plus chrome chopper-style
seat post wiring system
TWIN CAM WIRE SETS
These wire sets support the (stock and aftermarket) Twin Cam ignition modules. The
following factors should be considered when
choosing the appropriate wire set:
• Year of motor: 1999 motors feature a cam
position sensor, not used in mid 2000. Use
of a late 2000 after-market ignition
module can eliminate the cam sensor.
• Stock or after market controller. Aftermarket ignition modules do not support
the data link and factory diagnostic
equipment connection.
• Bank Angle sensor, must be used on stock
(and early model after-market) ignition
modules.
• These wire sets are pre-assembled with
2 (black and gray) 12 pin Deutsch
connectors to directly plug into the
ignition modules.All sets include wires for
M.A.P. sensor, crank sensor and ignition
coil.
731910 Wire set to accommodate stock
and after market ignition
modules, also includes wires for
Data Link
731911 Wire set to accommodate
1999 models equipped with
cam positioning sensor and
stock ignition module, also
includes wires for Data Link
731912 Wire set to accommodate after
market ignition modules
04-061
10300002_ZOD_H04_UK_62
1-9-2010
20:43
Pagina 062
Wiring & Electrical
04
ADAPTOR UNIT FOR USE WITH
MINI SWITCHES AND AUTOCANCEL TURN SIGNAL UNITS
Mini switches usually don't work with stock
or aftermarket auto-cancel turn signal
modules. This module provides the mini
switches will work with auto-cancel turn
signals. Measures 2" long, 1 1/4" high and
3/4" wide. Also compatible with Wire+
wiring systems for mini switches.
731943 Auto-cancel switch module
IN LINE FUSE HOLDER
This extra small "In-Line" fuse holder is the
perfect solution for Custom bike builders. It
is so small it can be used anywhere in the
wiring to wire up spot-lights, running lights
etc. Can also be used to replace the
automatic main fuse and in “Easy to Access”
places, it won’t be noticed anyway. The
rubber cap will protect the fuse from moister
and dirt. Replacement fuses are available
from 5 Amp. to 30 Amp.
239235 In line fuse holder (10 pack)
Flat Mini fuses (10 pack)
239210 Fuses 3 Ampere
239211 Fuses 5 Ampere
239212 Fuses 7.5 Ampere
239213 Fuses 10 Ampere
239214 Fuses 15 Ampere
239215 Fuses 20 Ampere
239216 Fuses 25 Ampere
239217 Fuses 30 Ampere
ACCEL SLEEVING KITS
Accel designed these sleeving kits to protect
and improve the appearance of wires, hoses
and cables by enclosing them in a neat, color
coordinated bundle. Sleeves are high
temperature (-40 thru 200+ degrees F), oil
and gasoline resistant and protects against
abrasion. Easy to cut to length with scissors
or a hot knife and held in place with heat
shrink terminating tubing. Each kit contains
10 Feet (3 meter) of 1/4" (6 mm) tubing,
10 Feet (3 meter) of 3/8" (9.5 mm) sleeving,
and 5 Feet (1.5 meter) of 1/2" (12.7 mm)
sleeving, all along with heat shrink
termination tubing. Kits are available in
Chrome, Black, Blue, Clear, Carbon Look,
Orange and Red.
797090 Black
797091 Blue
797092 Chrome
797093 Clear
797094 Carbon Look
797095 Orange
797096 Red
04-062
MULTIPLE ELECTRICAL WIRE
For those that want to make a simple wiring
harness for a Custom built bike we offer a
black outer, multiple inner electrical wire.
The wiring has 7 different color inner wires
which is enough for most Custom wiring
harnesses. Sold in length of 5 meters.
239227 Multiple wiring
ELECTRICAL WIRE
Tired of using "too thick or wrong colored"
electrical wire when making a Custom fit
wiring harness or extending/repairing the
existing wiring harness. Zodiac offers you a
wide variety of high quality electrical wire
with a 0.75 mm 100% copper core specially
for motor-cycle use. Available in lengths of
10 mtr. as well 100 mtr. shop spools.
10 mtr.
239190
239191
239192
239193
239194
239195
239196
239197
239199
239198
100 mtr.
239200
239201
239202
239203
239204
239205
239206
239207
239209
239208
Color
Black
Red
Blue
Yellow
Green
Grey
White
Violet
Brown
Red/Yellow
INSULATING TUBE
Not many shops offer the insulating tube
needed when making a Custom wiring
harness. Zodiac does and in two sizes. This
strong insulating tube is available with a
diameter of 10 mm and a wall thickness of
0.7 mm as well as 16 mm with 1 mm wall
thickness.Available in 5 meter length as well
as a shop pack of 25 meter.
Insulating tube 10 mm outside
diameter
239292 5 Meter
239220 Shop pack of 25 meter
Insulating tube 16 mm outside
diameter
239293 5 Meter
239221 Shop pack of 25 meter
10300002_ZOD_H04_UK_63
1-9-2010
20:48
Pagina 063
Wiring & Electrical
STAINLESS STEEL BRAIDED
WIRING HARNESSES
Namz Custom Cycle Products is
manufacturing stainless steel braided wiring
harnesses for over 8 years. For any stock or
custom motorcycle, a complete line of
stainless steel wiring harnesses for
handlebar controls, headlights, tachometers,
turn signals, regulators, oil sending switches,
ignitions, brake switches and any other
custom application is available. Generally
the harnesses are covered with a nonyellowing crystal clear PVC coating to
protect the bike and to preserve the products
polished finish. All kits and spare parts are
Do It Yourself (DIY).
Braided wire kits for handlebar
switches
Kits are available for internal and external
wired handlebar controls. Both versions
come with all required materials to
successfully braid stock or aftermarket
handlebar switches. Kits include stainless
steel braided wires, clear PVC shrink tubing,
black shrink tubing and sleeves.
701650 External kit 40"
701651 Internal kit 20"
Braided wire kit for regulator
With the Do It Yourself kit it’s easy to
improve the look of the stock black wire that
exits the regulator. Kit includes stainless
steel braided wire, clear PVC shrink tubing,
sleeves and ring terminal.
701657 Regulator kit 48"
04
Braided wire kits for Turn signal,
Headlight and Tachometer
These kits are complete wiring harnesses
measuring various lengths. The external
harness is constructed of braided stainless
steel encapsulated by clear PVC.The internal
16 gauge wires (red/white/black) are
compatible with high wattage bulbs.
701652 Turn signal kit 24"
701653 Turn signal kit 36"
701654 Headlight kit 18"
701655 Tachometer kit 48"
Braided
wire kit for
Oil pressure
switch
This
clear
coated hollow
tube allows to
dress-up single wires from EVO style Oil
pressure switches. Easily slides over your the
stock single wire.
701656 Oil pressure switch kit 16"
Braided
wire kit for
Brake
switch
A complete
wiring harness
that measures
24 inch.The external harness is constructed
of braided stainless steel encapsulated by
clear PVC. The internal 16 gauge wires
(red/orange) come pre-wired with flag
connectors.
701658 Brake switch kit 16"
Stainless steel braiding
DIY roll measuring 25ft of stainless steel
braiding. The highly polished & flexible
stainless steel braiding is clear coated.
Available in two inner diameters (ID).
701660 Stainless steel braiding max.
ID 1/2"
701661 Stainless steel braiding max.
ID 3/4"
Copper
braiding
DIY roll measuring 25 feet of copper
braiding. The flexible braiding is clear
coated. Maximum inner diameter is 1/2".
701662 Copper braiding max. ID 1/2"
Crystal clear PVC heat shrink
DIY roll measuring 25ft of crystal clear PVC
heat shrink. Available in 5 commonly used
diameters.This transparent coating protects
your bike and preserves any braided wire.
This shrink will not fade away or turn yellow.
Shrinks to half of its original size.
701663 Clear shrink max ID 1/4"
701664 Clear shrink max ID 5/16"
701665 Clear shrink max ID 3/8"
701666 Clear shrink max ID 1/2"
701667 Clear shrink max ID 3/4
Braided
wire kit for
Ignition
Another way to
hide the stock
black cable
that
exits
the cam cover. This DIY kit includes
stainless steel braided wire, clear PVC
shrink tubing and sleeves.
701659 Ignition kit 48"
04-063
10300002_ZOD_H04_UK_64
1-9-2010
20:51
Pagina 064
Hardware & Circuit Breaker
04
USA MADE CIRCUIT BREAKERS
Replacement circuit breaker for all Big Twin
and Sportster models 1973 thru 1993.
Available in 15 and 30 Amp. from Accel or
Standard.
Accel
Standard
231698 700582 Breaker assy
15 Amp.
(OEM 74589-73)
231699 700581 Breaker assy
30 Amp.
(OEM 74559-77)
USA MADE DUAL OUTPUT
CIRCUIT BREAKERS
Forget the unreliable double nut power
attachment method as these new design
circuit breakers feature dual 1/4" spade
terminals. Spade terminals are less prone to
vibration and corrosion and allow for cleaner
wiring. Made in the USA by Standard
Motorcycle Products and available in 30 and
40 Amp.
722007 Dual output breaker assy
30 Amp.
722008 Dual output breaker assy
40 Amp.
TRAY SHRINK SOCKET TUBES
Complete assortment of insulating shrink
socket tubes. Shrink sockets are a must
when making a soldered wire to wire
connection or clamp-on wire to plug
connections that are out in the open. It will
reinforce the connection and stop moisture
from coming in. Each assort-ment box
contains 130 pieces in 8 sizes for electrical
wires from 1.2 mm to 12.7 mm. Comes
complete with lighter. Refill packs are
available separately.
239219 Assortment tray with shrink
sockets
Refill packs, sold per 10 pack
236166 Shrink sockets 1.2 mm
236167 Shrink sockets 1.6 mm
236168 Shrink sockets 2.4 mm
236169 Shrink sockets 3.2 mm
236162 Shrink sockets 4.8 mm
236163 Shrink sockets 6.4 mm
236164 Shrink sockets 9.5 mm
236165 Shrink sockets 12.7 mm
USA MADE CIRCUIT BREAKERS
Top quality circuit breakers from Standard
Products. Fit all models 1994 to present.
Extra Heavy Duty quality to replace the stock
50 and 15 Amp. circuit breakers.The 40 and
50 Amp. circuit breakers are stud-type, the
15 Amp. circuit breakers are spade-type.
700580 Breaker assy, 50 Amp.
(OEM 74600-94)
722160 Breaker assy, 40 Amp.
(OEM 74600-97A)
722006 Breaker assy, 15 Amp.
(OEM 74587-94)
CIRCUIT BREAKER CLIPS
Reproduction of the OEM part. Clips are zinc
plated and come complete with aluminum
rivet. Used to hold the breaker assembly
and flasher unit on FL/FX/XL models
(OEM 9952).
144471 Circuit breaker clips
CABLE CONNECTOR TRAY
For the professional bike builder we offer a
workshop assortment of connectors, eyelets,
plugs, scotchlocks, etc. Tray contains
12 different connectors (320 pieces in total)
and the special crimping pliers.
239243 Starters assortment tray
04-064
10300002_ZOD_H04_UK_65
1-9-2010
20:55
Pagina 065
Connectors
04
ELECTRICAL PLUGS, EYELETS, CONNECTORS
We would like to give some advice to those that want to make a wiring
harness for their Custom build bike or are doing electric wiring repairs.
From experience we know that using cheap products is the wrong way.
Don’t cut corners when fixing electrical wiring on your expensive
motorcycle. If you do, you may end up at the side of the road with all
kinds of electrical failure.We have seen Burned-out alternators because
of poor wiring and cheap connectors. Blown-up batteries and burned
starter motors because of cheap wiring and poor quality eyelets etc.
Therefore we only offer cable plugs, eyelets, connectors etc. that are
DIN and ISO 9001 certificated. These connectors may be a little more
expensive than others but they do the job and guarantee you troublefree riding.
Red connectors for use with 0.25 to 1 mm2 (10 packs)
1. 239247 Eyelet with 4 mm hole
2. 239248 Eyelet with 5 mm hole
3. 239249 Eyelet with 6 mm hole
4. 239250 Eyelet with 8 mm hole
5. 239251 Eyelet with 10 mm hole
6. 239244 Flat plug female
7. 239245 Flat plug female, isolated
8. 239246 Flat plug male
9. 239267 Cable connector
Blue connectors for use with 1.5 to 2,5 mm2 wire
10. 239255 Eyelet with 3.5 mm hole
11. 239256 Eyelet with 4 mm hole
12. 239257 Eyelet with 5 mm hole
13. 239258 Eyelet with 6 mm hole
14. 239259 Eyelet with 8 mm hole
15. 239260 Eyelet with 10 mm hole
16. 239252 Flat plug female
17. 239253 Flat plug female, isolated
18. 239254 Flat plug male
Yellow connectors, for use with 4 to
6 mm2 wire(10 packs)
20. 239262 Eyelet with 4 mm hole
21. 239263 Eyelet with 5 mm hole
22. 239264 Eyelet with 6 mm hole
23. 239265 Eyelet with 8 mm hole
24. 239266 Eyelet with 10 mm hole
Scotch-Lock cable connector (10 packs)
25. 239239 For use with 1 to 2.5 mm2 electrical wire
26. 239238 For use with 0.25 to 1 mm2 electrical wire
Screw connector (per strip of 12)
27. 239241 For electrical wire up to 4 mm2
28. 239240 For electrical wire up to 2.5 mm2
Flat connector with hole, male (10 packs)
29. 239224 With 4 mm hole, single
30. 239225 With 5 mm hole, single
31. 239226 With 6 mm hole, double
Soldering eyelets for starter cables (10 packs)
32. 239236 With 6 mm hole
33. 239237 With 8 mm hole
Plug wire to coil connector (10 packs)
34. 239222 Clamp on connector
35. 239223 Screw in connector
04-065
10300002_ZOD_H04_UK_66
1-9-2010
20:59
Pagina 066
Connectors
04
DEUTSCH CONNECTOR SYSTEM
The greatest invention since electric cables! Ideal for custom wiring
or as replacement on OEM wiring harnesses. Best proof of the quality
from these connectors is that many OEM manufacturers including
the Factory in Milwaukee use them. Our wide variety of components
leaves nothing else to wish for. The waterproof connectors feature a
special design lock-up system to secure the connectors and avoid
accidental separation.Available for 2, 3, 4, 6, 8 and 12 pin connectors.
All parts to make up a complete connector have to be ordered
separately.
For example you want to connect 5 cables, in order to do this
you need:
1 x 6 Pin receptacle ZPN 741519
1 x 6 Pin plug ZPN 741522
1 x Wedge for 6 pin plug ZPN 741523
1 x Wedge for 6 pin receptacle ZPN 741520
Pin and socket contacts are available for 0.5-1.0 mm2 or
1.0-2.0 mm2 wires.
For 0.5-1.0 mm2 wires:
5 x Single pin contact ZPN 741536
5 x Single socket contact ZPN 741537
Deutsch Connector 3 pin
741506 3 Pin grey receptacle
741507 3 Pin black receptacle
741508 Wedge for 3 pin receptacle
741536 Single pin contact 0.5/1.0 mm2 wire, 10 pack
741538 Single pin contact 1.0/2.0 mm2 wire, 10 pack
741509 3 Pin grey plug
741510 3 Pin black plug
741511 Wedge for 3 pin plug
741537 Single socket contact 0.5/1.0 mm2 wire, 10 pack
741539 Single socket contact 1.0/2.0 mm2 wire, 10 pack
For 1.0-2.0 mm2 wires:
5 x Single pin contact ZPN 741538
5 x Single socket contact ZPN 741539
Note: This is just an example. If a different number of wires is
used, a different combination of component is used.
Deutsch Connector 2 pin
741500 2 Pin grey receptacle
741501 2 Pin black receptacle
741502 Wedge for 2 pin receptacle
741536 Single pin contact 0.5/1.0 mm2 wire, 10 pack
741538 Single pin contact 1.0/2.0 mm2 wire, 10 pack
741503 2 Pin grey plug
741504 2 Pin black plug
741505 Wedge for 2 pin plug
741537 Single socket contact 0.5/1.0 mm2 wire, 10 pack
741539 Single socket contact 1.0/2.0 mm2 wire, 10 pack
04-066
Deutsch Connector 4 pin
741512 4 Pin grey receptacle
741513 4 Pin black receptacle
741514 Wedge for 4 pin receptacle
741536 Single pin contact 0.5/1.0 mm2 wire, 10 pack
741538 Single pin contact 1.0/2.0 mm2 wire, 10 pack
741515 4 Pin grey plug
741516 4 Pin black plug
741517 Wedge for 4 pin plug
741537 Single socket contact 0.5/1.0 mm2 wire, 10 pack
741539 Single socket contact 1.0/2.0 mm2 wire, 10 pack
10300002_ZOD_H04_UK_67
1-9-2010
21:03
Pagina 067
Connectors
04
Deutsch Connector 6 pin
741518 6 Pin grey receptacle
741519 6 Pin black receptacle
741520 Wedge for 6 pin receptacle
741536 Single pin contact 0.5/1.0 mm2 wire, 10 pack
741538 Single pin contact 1.0/2.0 mm2 wire, 10 pack
741521 6 Pin grey plug
741522 6 Pin black plug
741523 Wedge for 6 pin plug
741537 Single socket contact 0.5/1.0 mm2 wire, 10 pack
741539 Single socket contact 1.0/2.0 mm2 wire, 10 pack
Deutsch Connector 8 pin
741524 8 Pin grey receptacle
741525 8 Pin black receptacle
741526 Wedge for 8 pin receptacle
741536 Single pin contact 0.5/1.0 mm2 wire, 10 pack
741538 Single pin contact 1.0/2.0 mm2 wire, 10 pack
741527 8 Pin grey plug
741528 8 Pin black plug
741529 Wedge for 8 pin plug
741537 Single socket contact 0.5/1.0 mm2 wire, 10 pack
741539 Single socket contact 1.0/2.0 mm2 wire, 10 pack
Deutsch Connector 12 pin
741530 12 Pin grey receptacle
741531 12 Pin black receptacle
741532 Wedge for 12 pin receptacle
741536 Single pin contact 0.5/1.0 mm2 wire, 10 pack
741538 Single pin contact 1.0/2.0 mm2 wire, 10 pack
741533 12 Pin grey plug
741534 12 Pin black plug
741535 Wedge for 12 pin plug
741537 Single socket contact 0.5/1.0 mm2 wire, 10 pack
741539 Single socket contact 1.0/2.0 mm2 wire, 10 pack
Mounting brackets for Deutsch Connectors
These mounting brackets slip into the guide on the receptacle for a
perfect fixture of the connector on theframe. Brackets can be screwed
or glued onto the frame.
741541 Grey mounting bracket 2-3-4-6-12 pin receptacle
741542 Black mounting bracket 2-3-4-6-12 pin receptacle
741543 Grey mounting bracket for 8 pin receptacle
741544 Black mounting bracket for 8 pin receptacle
Tools for Deutsch connectors
Professionals use professional tools, as they know that the right tool
is half the job.
741540 Professional hand crimp tool
741545 Removal tool
04-067
10300002_ZOD_H04_UK_68
1-9-2010
21:07
Pagina 068
Connectors
04
POSI-PRODUCTS ADVANCED
CONNECTORS
These patented connectors provide vibration
proof connections, making them extremely
good for use on motor-cycles.All connectors
are reusable, suit AC/DC standard wires up
to 600 VAC, and accept operation conditions
between -23°C and 120°C. Requires no
other special tools than a common wire
stripping tool.
Posi-Lock connectors (A)
These patented In-line connectors deliver a
superior connection to crimping. Wire ends
of single-core cables are easily locked
between opposing cone shapes by hand.
701240 Red connector 0.2mm2 1.0mm2, 9 pack
701241 Blue connector 1.0mm2 2.5mm2, 9 pack
701242 Yellow connector 2.0mm2 5.0mm2, 7 pack
701243 Red/Blue/Yellow connector
assortment, 9 pack
Posi-Tab connectors (B)
These tab-connectors power up to 4 wire
ends at once. If 2 or more wire ends are
tapped into the connector, wire twisting is
recommended.
701244 Grey connector 0.2mm2 1.0mm2, 6 pack
701245 Blue connector 1.0mm2 2.5mm2, 6 pack
701246 Black connector 2.0mm2 5.0mm2, 6 pack
701247 Red/Blue/Yellow connector
assortment, 6 pack
04-068
Posi-Twist connectors (C)
When In-line connectors are not needed,
these patented connectors deliver the same
superior connection as the Posi-Lock
connectors. A superior connection at very
attractive prices. Posi-Twist is completely
manufactured from Nylon 66. Resistance is
80% less than standard crimp connectors.
701248 Grey connector 0.2mm2 1.0mm2, 25 pack
701249 Amber connector 0.2mm2 2.5mm2, 18 pack
701250 Red connector 0.5mm2 5.0mm2, 12 pack
701251 Grey/Amber/Blue/Red
connector assortment,
Posi-Seal connectors (D)
This hi-tech and patented design moulds
and seals connections much better than any
other type of connection. Both areas of
intrusion, threads and wire insulation are
sealed eliminating the need for heat shrink
or dielectric grease.This results in a weather
and vibration proof connection. Connectors
are available for single-core cables only.
701252 Red connector 0.5mm2 1.0mm2, 4 pack
701253 Blue connector 1.0mm2 2.5mm2, 4 pack
701254 Yellow connector 2.5mm2 4.0mm2, 4 pack
701255 Green connector 3.5mm2 5.0mm2, 4 pack
Posi-Tite connectors (E)
Although no crimps needed, a waterproof
connection is delivered by this patented
technology. The connectors exceed
SAE/USCAR submersion tests. Very useful
for any all-weather motorcyclists.
701256 Red connector 0.5mm2 1.0mm2, 3 pack
701257 Blue connector 1.0mm2 2.0mm2, 3 pack
Posi-Fuse connectors (F)
Two versions to combine connector with
fuse holder. The blade-type fuse holder
incorporates the Posi-Lock no crimp
technology with universal fuse coverage.
This unique fuse holder features ATC, ATO
and Mini Fuse capacities. The round fuse
holder incorporates a universal fit for full
coverage of fuses and wire gauges to
connect wire ends directly to the fuse holder.
This Round version is a UL recognized
component. Both models accept 2.0mm2 5.0mm2 standard wires and feature Nylon
66 housings.
701258 Black connector with integrated
blade type fuse holder 30 Amp,
2 pack
701259 White connector with
integrated round type fuse
holder 30 Amp, 3 pack
10300002_ZOD_H04_UK_69
1-9-2010
21:11
Pagina 069
Connectors
04
STATOR SOCKET CONNECTOR
FOR TWIN CAM
Replacement connectors for stators as used
on Twin Cam models.These all weatherproof
sockets meet OEM specifications. Socket
housing, secondary lock and seal pins must
be ordered separately.
740435 Stator socket housing
(OEM 72614-01BK)
740436 Secondary lock (72654-01)
740437 Seal pin (OEM 72195-94)
JUNCTION BLOCKS AND
CONNECTORS
To help the Custom Bike Builder Zodiac
offers top quality junction blocks and
connectors with brass or brass-nickel plated
links and terminal screws. Designed for
severe use up to 30 Amps they will easily
take the job on your 6 or 12 Volt system.
Mounting holes are 7/32” diameter.
700553 Four terminal block, mounting
holes are 2 3/4" center to
center
700554 Six terminal block, mounting
holes are 3 5/16" center to
center
700552 Eight terminal block, mounting
holes are 5 1/16" center to
center
FLAT TERMINAL AND MULTIPLE
FLAT CONNECTOR
Isolated terminals for safely connecting and
splitting the wiring on your motorcycle. For
use with all colors non isolated flat
connectors.
239232 Flat connector (strip of 12 each)
239233 Flat connector 3 way (10 pack)
239234 Flat connector 4 way (10 pack)
2 POLE NEOPRENE MOLDED
CONNECTORS
Keep your Custom wiring clean and weather
proof with these 2 pole neo-prene molded
connectors. They come with 12” long
18 gauge wire and are sold in sets with one
plug and one receptacle.
722015 Neoprene molded plug and
receptacle set
BULK PACK BLACK CABLE TIES
Heavy-Duty high tensile strength nylon cable
ties in a shop pack of 100 pcs. Available in
11" or 15" length. Black only.
235500 Shop pack cable ties 11"
235501 Shop pack cable ties 15"
HEAVY-DUTY CABLE TIES
These 11" long cable ties are made of high
tensile strength nylon. They come in display
bubble pack of 12 per pack.
235506 Heavy Duty cable ties
COOLANT TEMPERATURE
SENSOR FOR V-ROD
U.S.A. made coolant temperature sensor.
Stock replacement for all V-Rod models
2001 to present.
701392 Temperature sensor
(OEM 32315-01)
04-069
10300002_ZOD_H04_UK_70
1-9-2010
21:15
Pagina 070
Stoplight Switches
USA MADE HYDRAULIC
STOPLIGHT SWITCHES
These hydraulic stoplight switche meet or
exceed stock quality and assure proper
functioning in all situations.
04
UNIVERSAL STOPLIGHT SWITCH
Usable for many Custom applications.
370013 Heavy-Duty construction.
700574 1951 thru 1973 Servi Car and
1958 thru 1970 Big-Twins
(OEM 72002-51A)
STOPLIGHT SWITCH KIT
Fits Big Twin models 1937-1957, 45" WL
models 1937-1957 and Servicar models
1937-1950. Includes all mounting
hardware. Pull-on type. Can be used for
Custom applications.
370039 Chrome switch kit
XL STOP-LIGHT SWITCH
Fits 1967 thru 1974 XL models. Chromeplated. Push off type (OEM 72004-70).
370041 Stop-light switch
04-070
HYDRAULIC STOPLIGHT
SWITCHES
Accel’s high quality, American made
stoplight switches ensure reliable
performance in the most severe
environments. Make sure your stoplight is
on when you hit the brakes. Feature HeavyDuty contacts, brass terminals, bright finish
plated shells, with top quality bakelite
insulators.
231931 Fits 1951 thru 1973 Servi Cars
and 1958 thru 1970 FL
(OEM 72002-51A)
231932 Fits all Big-Twins 1971 to
present (except FX 1973 thru
1977) and all Sportster 1979 to
present (OEM 72023-51A)
700575 Fits most Big-Twins 1971 to
present, all Sportster and Buell
models 1979 to present
(OEM 72023-51A)
742019
Fits Big Twins, Sportster and
Buell models 2000 to present
and V-Rod 2002 to present
BANJO BOLT WITH INTEGRATED
BRAKE LIGHT SWITCH
The ultimate solution for Custom Projects
are these stainless steel banjo bolts with
integrated brake light switch. You can use
these banjo bolts on master cylinder, brake
line T or Caliper. Come pre wired and are
available in 3/8” UNF threaded, 7/16-24 TPI
as well as M10x1.00 and M10x1.25. Sold
each.
741060 3/8-24 UNF
741062 7/16-24 TPI
741747 M10x1.00
741748 M10x1.25
10300002_ZOD_H04_UK_71
1-9-2010
21:18
Pagina 071
Oil Pressure & Stoplight Switches
ACCEL OIL PRESSURE SWITCHES
Harley-Davidson owners demand high
quality, reliable parts that perform.Therefore
Zodiac offers a complete American made
program of precision calibrated oil pressure
switches covering Harley-Davidson from
1941 to present. These high quality
replacement parts feature Heavy-Duty
contacts, brass pressure ferrules, thermoplastic insulators and bright finished plated
steel shells. All Accel oil pressure switches
for Harley are designed and tested to ensure
consistently accurate pressure thresholds.
We suggest that oil pressure switches be
replaced with each engine overhaul or
rebuild.
USA MADE OIL PRESSURE
SWITCHES
Standard Motor Products Oil Pressure
Switches are made of the finest materials
available to ensure maximum life time and
accurate performance.
04
NEUTRAL SWITCHES
Replacement neutral switches available for
most models. Switches meet or exceed
OEM specifications.
700571 Fits all Big-Twins 1941 thru
1984 (except Evolution),
K Models and Sportster
1954 thru 1976
(OEM 26552-72)
Fits 1965 thru 1970 FL models,
has dual blade type connectors
721749 USA made (OEM 71507-65)
Fits 1971 thru 1973 FX, FL and
FLH models, has screw type
connectors
721748 USA made (OEM 71507-71)
231925 Fits all Big-Twin models
1941 thru 1984 (except
Evolution) and Sportster and K
models 1954 thru
1976 (OEM 26552-72)
700572 Fits all Sportster models
1977 to present and Buell
(OEM 26554-77)
231926 Fits all Sportster and Buell
models 1977 to present
(OEM 26554-77)
700573 Fits all Evolution Big-Twins
1984 to present, except models
with electric oil pressure gauge
(OEM 26561-84)
Fits late 1979 thru 1984 FX and
FL models, 1984 thru 1985 FLST
models and 1985 thru 1986 FX,
FXWG, FXB and FXSB
722009 USA made (OEM 33901-79)
Fits 1986 thru 1997 Evolution
Sportster models, 1959 thru
1964 FL models, late 1973 to
early 1979 FX models and all
5 speed Big-Twin models
1980 thru 1997, has single
connector
721794 USA made (OEM 33900-59)
231520 Japanese Import
(OEM 33900-59)
Fits Evolution Sportster 1998 to
present, FLH/FLT models
1998 thru 2000 and Softail
models 1998 thru 1999, has dual
connectors
722031 USA made (OEM 33902-98)
Fits FLH/FLT models 2001 to
present and Softail models
2000 to present, has dual
connectors
722032 USA made (OEM 33904-00)
231927 Fits all Big-Twin Evolution
models 1984-up (except
models with electric oil
pressure gauge)
(OEM 26561-84)
742017
Fits Twin Cam 1999 to present
and V-Rod 2002 to present
(OEM 26561-99)
04-071
10300002_ZOD_H04_UK_72
1-9-2010
21:22
Pagina 072
Horns
04
12 VOLT HORN SET
Chrome horn set, can be used as
replace-ment for black face horn set on
many makes or models or for Custom
applications. Horns are approx. 3 1/2" in
diameter. Sold in sets of 2.
173023 12V Horn set
CHROME HORNS
Chrome plated "Universal use" 12V horn
work with all 12 Volt bikes. Available with
a grooved or classic style cover. Don't let
the small size fool you, these horns produce
100 Decibels.
EARLY STYLE ELECTRIC HORN
A perfect reproduction of Harley's early style
horn but with chrome grill. Heavy-Duty
construction. Horn is 5 5/16" in diameter.
Available in 6 and 12 Volt for stock
replacement and Custom applications.
173012 Horn 6 Volt (OEM 69020-31)
173015 Horn 12 Volt (OEM 69005-85T)
CUSTOM ELECTRIC HORN 12 VOLT
Custom style electric horn with chrome face.
Usable as OEM replacement on most 12 Volt
motorcycles. Horn is approx. 3 1/2" in
diameter.
173027 Custom Horn
04-072
CHROME 2.5" MINI HORN
Universal 12 volt chrome plated mini horn.
Only 2.5" (63 mm) in diameter but still able
to generate 102dB. Mounting bracket is
included.
173087 Chrome RS mini horn
X-STYLE HORNS
These 12-volt horns don't only sound good
they look good too. Chrome plated finish
with design pattern cover. Feature heavyduty brackets.Available in 3 1/2", as well as
2 1/4" diameter.
173084 2 1/4" diameter
173085 3 1/2" diameter
A. 173080
B. 173081
C. 173082
Grooved cover, single
bracket, 65 mm
Classic cover, dual bracket,
80 mm
Grooved cover, dual
bracket, 100 mm
HORN RELOCATION KIT FOR
SOFTAIL MODELS
When the coil is Custom-mounted between
the cylinder heads, this relocation kit permits
you to install a horn where the coil originally
used to be. After the installation, you can
cover the new horn with your old coil cover.
Kit includes a bracket, wiring, hardware and
a universal 12 Volt horn that measures
approx. 3 1/2" in diameter.
173014 Horn with relocation kit
10300002_ZOD_H04_UK_73
1-9-2010
21:26
Pagina 073
Horns & Sirens
04
STEBEL TWIN ELECTRIC HORNS
High decibel (107dB) Stebel Show-Chrome horn set. Comes complete
with relay, universal brackets and hardware. Ideal for motorcycles
where mounting space is limited.
173035 Stebel Twin Electric Horns
1936 STYLE REAR WHEEL SIRENS FOR SWINGARM,
SOFTAIL AND HARDTAIL MODELS
These "Sterling" rear wheel sirens are an exact reproduction of the
1936 police sirens. According to the old accessory catalog "Sirens
are positive in action and streamlined for Beauty". Covers are made
of polished cast aluminum. Bracket and foot lever are chrome plated
drop forged steel. Available 1936 thru 1957 hardtail models,
1958 thru 1986 swingarm models, and 1985 thru 2001 and 2002 to
present Softail models. Sirens come complete with all necessary
mounting brackets, foot lever cable or rod.
710116 Complete set, fits 1936 thru 1957 Big-Twin models with
Hardtail frames
710117 Complete set, fits 1958 thru 1986 Big-Twin swingarm
models
710118 Complete set, fits Softail models thru 2001
710172 Complete set, fits Softail models 2002 to present
710119 Replacement cable for Softail models
TRUMPET HORN KIT FOR SOFTAIL MODELS
Re-designed version of the 'Early Style' electric horn to fit all Softail
models 1984 to present.Will provide your Softail that nostalgic look.
Kit has complete Show-Chromed finish. Comes with detailed fitting
instructions.
173048 Softail trumpet horn kit
HORN MOUNTING BRACKET
Triple Chrome-plated horn mounting brackets. Replace the Original
Equipment brackets on Softail and FLT models.
173051 Fits Softail models 1987 thru 1990 (OEM 69118-84)
173050 Fits Softail and FLT models 1991 to present
(OEM 69120-91)
CHROME HORN BRACKET
Chromed version of the OEM horn bracket as used on 2004 to present
XL 883, XL 883 C and XL 1200 R Sportster models.
173047 Chrome horn bracket (OEM 69135-04)
04-073
10300002_ZOD_H04_UK_74
1-9-2010
21:30
Pagina 074
Horn Covers & Battery Cushions
04
HORN MOUNT RUBBER
Getting tired of broken horn brackets on
your custom motorcycle. Sometimes small
things can make the difference. Mount your
horn with this rubber to the frame and
vibrations from frame to horn will be
eliminated. Suitable for OEM replacement
and many custom applications. Studs are
5/16 x 1/2” UNC (OEM 6912392).
358221 Horn mount rubber
CHROME HORN COVERS
Chrome-plated replacement horn covers.
173018 Fits the low note horn on
Sportster models 1976 thru
1985 and FX models 1976 thru
1980 (OEM 69140-76T)
173019 Fits the high note horn on all
Big Twin models 1970 thru
early 1976 (OEM 6914170T)
173020 Fits the high note horn on all
Big Twins late 1976 thru
1990 and Sportster models
1976 thru 1985
(OEM 69017-76T)
302179 Fits all FXST/FLST models
1993 thru 2006 and
XL1200 models 1993 to
present (OEM 69012-93A)
04-074
A. CHROME HORN COVERS
Chrome-plated replacement horn covers
with the old-style embossed bird logo. An
addition to our line of “Bird Logo”
accessories.
173031 Fits the high note horns on all
models from 1970 thru early
1976 (OEM 69141-70)
173029 Fits the low note horns on FX
models from 1976 thru
1980 and Sportster models
from 1976 thru
1985 (OEM 69140-76)
173030 Fits the high note horns on all
Big-Twin models from late
1976 thru 1990 and 1976 thru
1985 Sportster models
(OEM 69017-76)
B. LOUVERED CHROME HORN
COVERS
Beautifully Chromed and louvered horn
covers.Will perfectly fit to the stock mounts
without any adjustments. A perfect match
with our other louvered covers.
173034 Fits the high note horns on all
models from 1970 thru early
1976 (OEM 69141-70)
173032 Fits the low note horns on FX
models from 1976 thru
1980 and Sportster models
from 1976 thru
1985 (OEM 69140-76)
173033 Fits the high note horns on all
Big-Twin models from late
1976 thru 1990, and 1976 thru
1985 Sportster models
(OEM 69017-76)
BADLANDS BILLET ALUMINUM
HORN
The styling of this horn complements the VTwin “Motor and Fin” design perfectly. This
USA made Badlands product features a
single tone horn. Chrome fasteners are
included, so it comes ready to bolt on.
Milled from 6061 Billet aluminum
with Chromeplated finish. Measures
5 1/2” (14 cm) high and 6 1/2” (16.5 cm)
wide.
238333 Billet aluminum horn
BATTERY TRAY CUSHION RUBBER
Battery tray cushion rubbers as used on most
models from 1997 to present. Made from
oil, acid and heat resistant NBR rubber.Also
fits most aftermarket and Custom made
battery trays for Softail, FXR and Dyna
models (OEM 66210-97).
013205 Battery tray cushion rubber
SOFTAIL BATTERY CUSHION
Replacement battery cushion for Softail
models. Cushion is oil and heat resistant,
absorbs engine vibration and protects the
battery against cracking thus leakage.
Fits 1986 to present Softail models
(OEM 66210-85B).
013200 Softail Battery cushion
10300002_ZOD_H04_UK_75
1-9-2010
21:33
Pagina 075
Batteries
04
YUASA BATTERIES
Yuasa Battery Co. is the worlds largest Original Equipment battery
supplier in the motorcycle industry. Since many years they also supply
Harley-Davidson with private label batteries. Zodiac offers the same
top-quality batteries at very competitive prices. For most models we also
offer a high output battery. High output batteries have more cold
cranking Amps and are highly recommended for high compression
motors. All Yuasa batteries come dry charged from the factory and,
where applicable, only have to be filled with the acid supplied with
the battery before use.
Fits FX and Sportster, kickstart only models
1970 thru 1978 (OEM 66006-70)
710185 Stock replacement battery 12N74A (B)
Fits FL and FLH 4 speed models 1965 thru 1984 and
electric start Sportsters models 1967 thru
1978 except XLCR (OEM 66005-65A)
710184 Stock replacement battery YHD12 (B)
Fits all 5 speed FLT, FLHT, FLHS and Road King models
1980 thru 1996 (OEM 66010-82)
710187 Stock replacement battery Y50N18LA (A)
710183 High output battery Y50N18LACX (A)
Replaces the stock maintenance free battery in all
FLT and FLH models 1997 to present
710193 Conventional battery YB30L-B (A)
Fits Dyna Glide and Softail models 1991 to present
(OEM 65989-90A). Can also be used in Sportster
models 1997 thru 2003 when the rubber bumpers in
the battery tray are removed
710186 Stock replacement battery YB16LB (A)
710180 High output battery YB16HLACX (A)
Fits all electric start FX models 1973 thru 1978, XLCR
models 1977 thru 1978, Sportster models 1979 thru
1996, FXR models 1982 thru 1994 and Softail models
1984 thru 1990 (OEM 65991-75 & 65991-82)
710181 Stock replacement battery YB16B (B)
710182 High output battery YB16BCX (B)
04-075
10300002_ZOD_H04_UK_76
1-9-2010
21:37
Pagina 076
Batteries
04
ZODIAC'S ECONOMY BATTERIES
Very economically priced batteries. There may be lower priced
alternatives, but for sure they won't be produced to the same high
quality standards as Zodiac's Economy batteries. Most models are
available in Conventional, Maintenance Free, High Output and Factory
Sealed versions.
Conventional
Conventional lead/acid batteries are supplied dry charged and include
an easy to use non-spill acid pack that fills every cell with exactly the
required acid volume. When the fluid level lowers in use you have to
top the cells to the indicated maximum level with distilled water.
Maintenance Free
These are conventional lead acid batteries, just like the Conventional,
but have an improved vent system that reduces the evaporation of
water so drastically that, except when there is something really wrong
with your charging system, it is hardly ever necessary to add distilled
water.
High Output
These batteries feature special plates and separators that fully absorb
the supplied high gravity acid from the acid pack.The high gravity acid,
the special plates and separators also increase the Cold Cranking
Amperage, which makes them great for use in bikes with Big Inch or
High Compression motors.
Factory Sealed
Top of the bill batteries that come filled from the factory and are built
to perform.They feature Absorbed Glass Mat technology. Maintenancefree sealed batteries are designed to resists vibration damage, a very
low self-discharge rate and provide higher Cold Cranking Amps than
Conventional wet type batteries.
04-076
Fits all 2002 thru 2006 V-Rod and 2007 VRSCR Street
Rod
(B) L=15 cm, H=14.6cm, W=8.7 cm (OEM 65948-00)
738026 Maintenance Free battery, 12 AH
738037 Factory Sealed battery, 12 AH
Fits Buell 1987 thru 1996
(B) L=17.3 cm, H=15.5 cm, W=10 cm (OEM 65991-75TC & 65991-82)
738024 Conventional battery with increased output, 19 AH
738028 Low Maintenance battery, 19 AH
Fits Buell S1 Lightning 1996 thru 1999, XB9S
Lightning 2002 thru 2003 and XB9R Firebolt
2002 thru 2003
(B) L=15 cm, H=14.6cm, W=8.7 cm (OEM 65948-00)
738026 Maintenance Free battery, 12 AH
738037 Factory Sealed battery, 12 AH
Fits Buell S1, M2 and S3 models 1997 to present
(A) L=17.5 cm, H=15.5 cm, W=8.7 cm (OEM 65989-90B)
738025 Conventional battery, 19 AH
738032 Low Maintenance battery, 19 AH
738040 Factory Sealed battery, 19 AH
Fits electric start Sportster 1967 thru 1978 (except
XLCR)
(B) L=20 cm, H=16 cm, W=13 cm (OEM 66006-65TA & 66007-84)
738022 Conventional battery, 28 AH
Fits kickstart-only Sportster models 1970 thru 1978
(B) L=13.5 cm, H=13.5 cm, W=7.5 cm (OEM 66006-70T)
738021 Conventional battery, 7 AH
10300002_ZOD_H04_UK_77
1-9-2010
21:40
Pagina 077
Batteries
Fits electric start Sportster XLCR models 1977-1978
(B) L=17.3 cm, H=15.5 cm, W=10 cm (OEM 65991-75TC & 65991-82)
738023 Conventional battery, 16 AH
738033 Maintenance Free battery, 18 AH YTX20H-BS
Fits Sportster 1979 thru 1996
(B) L=17.3 cm, H=15.5 cm, W=10 cm (OEM 65991-75TC & 65991-82)
738024 Conventional battery with increased output, 19 AH
738028 Low Maintenance battery, 19 AH
Fits Sportster 1997 thru 2003
(A) L=17.5 cm, H=15.5 cm, W=8.7 cm (OEM 65989-90B)
738025 Maintenance Free battery, 18 AH
738032 Maintenance Free High Performance battery, 18 AH
738040 Factory Sealed battery
Fits all electric start FX models 1973 thru 1986, all
FXR models 1982 thru 1994 and Softail models
1984 thru 1990
(B) L=17.3 cm, H=15.5 cm, W=10 cm (OEM 65991-75TC & 6599182)
738023 Conventional battery, 16 AH
738024 Conventional battery with increased output, 19 AH
738028 Low Maintenance battery, 19 AH
04
(B) L=17.5 cm, H=15.5 cm, W=8.7 cm
738033 Maintenance Free battery, 18 AH YTX20H-BS
(B) L=17.5 cm, H=15.5 cm, W=10 cm
738039 Factory Sealed battery, 16 AH YB16B (S)
Fits Sportster 1997 thru 2003, slightly larger than
stock, installation requires removal of the stock
rubber bumpers from the battery tray
(A) L=17.5 cm, H=15.5 cm, W=10.0 cm
738030 Conventional battery, 19 AH
738027 Low Maintenance battery, 19 AH
738041 Factory Sealed battery, 19 AH
Fits Sportster 2004 to present
(A) L=15cm, H 14.6cm, W=8.7 cm
738031 Maintenance Free battery, 14 AH
738038 Factory sealed battery, 14 AH
Fits FXR 1982 thru 1994 and Softail 1986 thru 1990
(B) L=17.3 cm, H=15.5 cm, W=10 cm (OEM 65991-75TC & 65991-82)
738024 Conventional battery with increased output, 19 AH
738028 Low Maintenance battery, 19 AH
Fits Softail 1991 to present and Dyna 1997 to present
(A) L=17.5 cm, H=15.5 cm, W=8.7 cm (OEM 65989-90B)
738025 Maintenance Free battery, 18 AH
738032 Maintenance Free High Performance battery, 18 AH
738040 Factory Sealed battery
Fits FL and FLH 4 Speed models 1965 thru 1984
(B) L=20 cm, H=16 cm, W=13 cm (OEM 66006-65TA & 66007-84)
738022 Conventional battery, 28 AH
SEALED MAINTENANCE FREE BATTERIES
Sealed batteries were originally developed for use in the space
industry as they could be used in any position and were holding
Voltage better than regular lead acid batteries. These Sealed
Maintenance Free batteries come ready to use. You will no longer
have to check the acid level again nor top-it-up with distilled water
again. These batteries are attractively priced and come with a 1 year
limited warranty.
251274 Softail models 1991 to present, FXD and Buell S1 models
1997, M2 and S3 models and Sportster 1997 thru
2003 (A) L=17.5 cm, H=15.5 cm, W=8.7 cm
251273 FXR models 1982 thru 1994, Softail models 1986 thru
1990, Sportster models 1979 thru 1996, Buell models
1987 thru 1996 (B) L=17.5 cm, H=15.5 cm, W=8.7 cm
251275 FLT, FLH and Road King models 1980 thru 1996 (A)
L=20.5 cm, H=16 cm, W=9 cm
Fits FL, FLH and FLT series models 1980 thru 1996
(A) L=20.5 cm, H=16.2 cm W=9.0 cm (OEM 66010-82)
738020 Conventional battery
738029 Low Maintenance battery, 20 AH
738036 Maintenance Free battery, 21 AH
Fits FLH and FLT series models 1997 to present
(A) L=16.8 cm, H=17.4 cm, W=12.6 cm (OEM 66010-97B)
738035 Conventional battery, 30 AH
Fits kickstart-only FX models 1970 thru 1978
(B) L=13.5 cm, H=13.5 cm, W=7.5 cm (OEM 66006-70T)
738021 Conventional battery, 7 AH
04-077
10300002_ZOD_H04_UK_78
1-9-2010
21:44
Pagina 078
Batteries
04
BATTERIES FOR HARLEY-DAVIDSONS
Harley riders demand the best and Zodiac batteries have it. These
low priced batteries meet or exceed OEM requirements and have a
6 months limited warranty.
251205 Fits FL and FLH 4 Speed models 1965 thru 1984 and
Sportster with electric start (except XLCR) 1967 thru
1978 (OEM 66006-65TA & 66007-84) (CH4-12)
251199 Fits all FX and Sportster models with kickstart only
1970 thru 1978 (OEM 66006-70T) (12N7-4A)
251208 Fits all electric start FX models 1973 thru 1978, XLCR
models 1977-1978 (OEM 65991-75TC) (12 N16-4B)
251209 HIGH OUTPUT, fits all electric start FX models 19731986, all Sportster models 1979 thru 1996, XLCR
1977 thru 1978, all FXR models 1982 thru 1994 and
Softail models 1984 thru 1990 (OEM 65991-75TC &
65991-82) (YB16-B)
251184 Fits FLT, FLHT, and FLHS 5 Speed models 1980 thru
1996 (OEM 66010-82) (Y50-N18L-A)
251272 Fits all Dyna and Softail Models 1991 to present, and
Sportster models 1997 thru 2003 (OEM 65989-90A)
ZPN
251199
251205
251272
251209
251184
251208
Volt
12
12
12
12
12
12
Amp.
7
32
16
16
20
17
Lenght
13.5
20
17
17.3
20.5
17.3
Width
7.5
13
10
10
9
10
Height
13.5
16
15.5
15.5
16
15.5
+top
B
B
A
B
A
B
YUASA "V-FORCE" HIGH OUTPUT MAINTENANCE
FREE BATTERIES
V-Force Maintenance Free batteries are high-output batteries and
are holding voltage better than regular lead-acid batteries. The 200,
310 and 350 cranking Amp batteries come dry with a special easyto-use highgravity battery acid pack. Once filled from this special
pack, the acid is totally absorbed in the special plates and separators.
The battery is then permanently sealed with the included plug off
strip, never to be opened again and ready for use. Because of the
permanent seal, there is no need for the Yuasa V-Force batteries to
check the acid level, nor topping-up with distilled water again. VForce batteries have been tested and proven on Big Inch and High
Compression motors. Even engines with 14:1 compression can be
easily started.
Fits Sportster 2004 to present
(A) L=15cm, H 14.5cm, W=8.7 cm
710232 200 Cranking Amps battery
Fits FXR 1982 thru 1994, Softail 1986 thru 1990,
Sportster 1979 thru 1996. and Buell 1987 thru 1996
(B) L=17.5 cm, H=15.5 cm, W=8.7 cm
710178 310 Cranking Amps battery
710342 High Performance 350 Cranking Amps battery
Fits Softail 1991 to present, Dyna 1997 to present,
Buell S1, M2 and S3 models 1997 to present,
Sportster 1997 thru 2003 and VRSC V-Rod models
2007 to present, except 2006 thru 2007 Street Rod
(A) L=17.5 cm, H=15.5 cm, W=8.7 cm
710179 310 Cranking Amps battery
710341 High Performance 350 cranking Amps battery
Fits FL, FLH and FLT all models 1980 thru 1996
(A) L=20.5 cm, H=16.2 cm W=8.7 cm
700758 310 Cranking Amps battery
Fits FLH and FLT all models 1997 to present
(A) L=16.6 cm, H=17.5 cm, W= 12.6 cm
710192 335 Cranking Amps battery
Fits all VRSC V-Rod models 2002 thru 2006 and
VRSCR Street Rod 2006 thru 2007
(B) L=15 cm, H=14.5cm, W=8.7 cm
700802 200 Cranking Amps battery
Note: These High Power batteries will need longer charging time
than normal lead-acid batteries. You should ride the bike for 50 to
60 miles to fully recharge the battery after starting. If this is not done
the use of our AccuMate Trickle Charger (ZPN 238436) is
recommended when the bike is stored. On some models minor
modification of the battery hold down system may be necessary.
04-078
10300002_ZOD_H04_UK_79
1-9-2010
21:47
Pagina 079
Batteries & Battery Chargers
04
GENUINE AGM BATTERIES
These “Genuine” batteries are exactly the
same as installed by “The Factory”. They
offer the latest technology for higher cold
cranking amps, long life and improved
rechargeability. Featuring the latest AGM
(Absorbed Glass Matt) separator technology
for a durable, long lasting and trouble free
service time. Batteries come ready to install,
just charge them before the first time you
want to start the bike to get the full extend
of the battery life time. Batteries have the
Harley-Davidson Bar and Shield logo molded
into the case.
750797 Fits 1977 thru 1996 Sportster
(OEM 65991-82B)
750796 Fits 1997 thru 2003 Sportster
(OEM 65989-97A)
750794 Fits 2004 to present Sportster
(OEM 65958-04)
750793 Fits all 2002 thru 2006 V-Rod
and 2007 VRSCR Street Rod
(OEM 65948-00)
750796 Fits VRSC V-Rod models
2007 to present, except
2006 thru 2007 Street Rod
(OEM 65989-97A)
750797 Fits 1973 thru 1994 FX and
FXR and 1984 thru 1990 Softail
(OEM 65991-82B)
750795 Fits 1991 thru 1996 Dyna and
Softail (OEM 6598990B)
750796 Fits 1997 to present Dyna and
Softail (OEM 6598997A)
750798 Fits 1980 thru 1996 FLH & FLT
series models
(OEM 66010-82B)
750799 Fits 1997 to present FLH & FLT
series models
(OEM 66010-97A
ACCUMATE PRO SMART BATTERY
CHARGER
Suitable for all types of batteries (lead-acid,
absorbed acid, Gel, etc.) with a capacity of
more than 10Ah.Very easy to use - Connect
to battery and mains power. The rest is fully
automatic. In addition to its quick charging
ability, AccuMate PRO is ideal for long term
maintenance of the batteries of irregularly
or seasonally used vehicles & appliances,
“old-timer”, veteran & collectors vehicles.
The easily detachable handle incorporating
a cable storage reel and clamp storage can
be mounted above the main housing (for
carrying) or below (for wall-mounted
application, by means of 2 pear-slots in the
rear of the housing which engage on two
screws in the wall). The compact charger
dimensions of 5 1/2” x 6 3/8” x 6” high
include the handle. Intelligent electronic
protections against inverse polarity, shortcircuit, over-heating with built in spark
suppression. Additional fuse protections
provided for eyelet connection set,AC input,
and a thermal fuse protects the transformer.
Complete with instructions.
238480 AccuMate Pro Smart battery
charger
ZODIAC 'ACCUMATE'
AUTOMATIC BATTERY CHARGER
When you have used the starter motor,
specially high torque starter motors, to start
your Harley-Davidson motorcycle it takes a
ride of at least 50 Miles to recharge the
battery fully.As a result, a few starts without
putting some mileage on, can very easily
flatten the battery. On the other hand, a
constant charge from a normal charger may
overcharge your battery and kill it. As the
best solution we have had a fully automatic
trickle battery charging system developed
by AccuMate.This private label Zodiac Trickle
Charger, will cure your starting problems and
extend the battery life. It can be used for
both 6 and 12 V, including lead acid
batteries, Gel batteries and Maintenance
Free batteries. This 3-stage “IUoU” Power
Charging System not only charges a low
battery, it also maintains a battery in top
condition, automatically recharging the
battery when the current drops under
200 mA. The AccuMate is extremely easy to
operate having only one switch to select
either 6 or 12 V. Electronic automatic fuses
prevent short circuiting or wrong polarity.
The AccuMate also has 5 LED’s to warn you
for:
• Power On
• Charging
• Voltage Selection
• Wrong Polarity
• Fully Charged
Separately available is an additional eyelet
connection cable set, as supplied with the
charging device, making it possible to
maintain the batteries of more than one
vehicle.
238436 AccuMate automatic battery
charging system
238437 Eyelet connection cable set
743160
Eyelet connection cable
set, water proof
04-079
10300002_ZOD_H04_UK_080
29-9-2010
15:14
Pagina 080
Batteries & Battery Chargers
04
ZODIAC ACCUMATE-V BATTERY
CHARGER
The Zodiac AccuMate V is a 1,8 Amp
versatile, 4-step, automatic charger and
maintainer for sealed and filler cap 12V
lead-acid batteries. It will charge and
maintain any size battery, although best
suited to batteries of capacity from 7Ah to
about 90Ah. It comes with detachable
battery clips and a fused battery snap cord
with weatherproof connector for easy onvehicle charging. The Accumate-V keeps
your battery in ready-to-start-your-bike
condition as it features an advanced 4-step
charging program:
STEP 1: Boost - Constant current charging
at 1,8A until the rising voltage
reaches14,3V.
STEP 2: Absorption - Voltage held at 14,3V
until the current drawn by the battery falls
to 200mA.
STEP 3: Maintenance - Float mode : the
voltage is held at 13,5V for ideal long-term
battery care.
STEP 4: Interactive standby - Monitors if
current exceeds 200mA during long term
maintenance charging. If it does, it cycles
between steps 2 and 3 to prevent the battery
from losing any charge due to permanently
connected devices such as an alarm or
parasitic drain caused by aged or faulty
vehicle wiring. A bracket for mounting the
charger on a vertical surface is separately
available. It mounts the charger under a
45° angle, providing optimal visuals of the
LED indicators and access to charger cable.
It also provides you with a cable wind &
storage area for charge cable and battery
clips. Includes screws and plugs for wall
mounting and fixing charger to the bracket.
238478 Zodiac Accumate-V automatic
battery charger
238479 Optional wall mount bracket
04-080
ACCUMATE BATTERY CHARGER
FOR ODYSSEY BATTERIES
This professional battery charger is a Dual
program type.The first program is specifically
to charge and maintain Odyssey and other
AGM and deep-cycle batteries. The second
program is for all types of batteries (leadacid, absorbed acid, Gel, etc.) with a capacity
of more than 20Ah. Very easy to use Connect to battery and mains power. The
rest is fully automatic. In addition to its quick
charging ability, AccuMate PRO is ideal for
long term maintenance of the batteries of
irregularly or seasonally used vehicles &
appliances, "old-timer", veteran &
collectors‘ vehicles. The easily detachable
handle incorporating a cable storage reel
and clamp storage can be mounted above
the main housing (for carrying) or below (for
wall-mounted application, by means of
2 pear-slots in the rear of the housing which
engage on two screws in the wall). The
compact charger dimensions of 14 x 16 x
15 cm (5 1/2" x 6 3/8" x 6") high include
the handle. Intelligent electronic protections
against inverse polarity, short-circuit, overheating with built in spark suppression.
Additional fuse protections provided for
eyelet connection set, AC input, and a
thermal fuse protects the transformer.
Complete with instructions.
236402 AccuMate Pro Dual Program
battery charger
DIGITAL BATTERY TESTER
No more guessing, the TestMate is an easyto-use portable battery tester specifically
developed for all 12V starter batteries from
2 to 30Ah (SAE) rated capacity. Batteries of
various different types of construction can be
accurately tested, by way of 2 selectable
programs. Program 1 is for batteries with
filler caps, Program 2 for VRLA (Valve
Regulated Lead Acid), GEL (Starter batteries
with gel electrolyteas from Panasonic,
Mareg and Fiamm), and AGM (Absorbent
Glass Mat separator type whether drycharged or “wet”, factory-filled, of the types
made by Yuasa and GS Battery and their
equivalents like East Penn (Harley), and
Hawker’s “Odyssey”) Selections are made
on large touch-pad keys, with their functions
clearly described to the left. Information is
displayed on a double line dot- matrix LCD
screen. Upon connection to a 12V starter
battery the TestMate will power up
automatically and display the battery
voltage, indicating if the battery has
sufficient charge to ensure an effective test.
(It is always important to charge a battery
prior to testing for accurate results.)
Selection of battery type (SLI or
VRLA/GEL/AGM) followed by Amp-hour
rating (2 to 30Ah) concludes user input.
Quick, accurate and reliable. Has one year
limited warranty.
238477 TestMate digital battery tester
10300002_ZOD_H04_UK_81
1-9-2010
21:54
Pagina 081
Batteries
04
ODYSSEY "HIGH CRANKING POWER". DRYCELL
BATTERIES BY HAWKER ENERGY
Wherever superior cranking power, dependability and longevity is
required, Hawker’s Odyssey batteries lead the field. These batteries
outperform conventional, calcium and Gel batteries.They have double
or triple the cranking power of conventional batteries and will recharge
in less than half the time. Even after repeated starts they will still crank
a high compression engine, therefore we strongly recommend them for
large displacement or high compression engines. These batteries will
easily peak to over 500 Amps cranking Power. Odyssey batteries are
100% sealed, absolutely maintenance free and can be shipped and
handled as .Non Hazardous. goods. They are shipped fully charged,
simply install the battery, switch the ignition on, push the starter button
and you are ready to go.
Other features are:
• Ultra low self-discharge rate eliminates maintenance during storage
• Superior Vibration resistant (designed for Harley use)
• Mounting flexibility, can be mounted in any orientation without
sacrificing performance
• Fast recharge (can be returned to 95% in 30 minutes)
• Long life, up to four times longer than conventional batteries
• Operation temperature range -40° Celsius to + 60° Celsius
• Full 2 Years limited warranty
The Odyssey battery is NOT a gel battery. It is a true dry battery (no acid
spill even when split open) that’s why it’s called a Drycell Battery and
it produces more power and for a longer time than a gel battery. The
dimensions of these batteries may differ from stock dimensions, check
for the correct size before ordering.
720346 Odyssey 535, fits 1973 thru 1986 FX electric start models,
Sportster 1979 to present, FXR 1982 thru 1994 and Dyna
models 1991 thru 1997. Not recommended for Softails.
535 crank amps. Length 167 mm, Height 156 mm, Width
99 mm. (B)
720347 Odyssey 545MJ, fits Softail models, lower than stock
battery (OEM strap is too long). 545 crank amps. Length
178 mm, Height 131 mm, Width 86 mm. (A)
720348 Odyssey 680MJ, fits 1981 thru 1996 Dresser models
FL(H)T(R) models. 80 crank amps. Length 185 mm, Height
169 mm, Width 79 mm. (A)
720349 Odyssey 925MJ, fits 1997 to present Dresser FL(H)T(R)
models. 925 crank amps. Length 175 mm, Height
128 mm, Width 169 mm. (A)
720364 Odyssey 925LMJ, same as ZPN 720349 but with reverse
polarity for custom applications (B)
04-081
10300002_ZOD_H04_UK_82
1-9-2010
21:58
Pagina 082
Battery Cables & Accessories
04
THERMOTEC BATTERY WRAP
HEAT BARRIER
This battery wrap gives you the ultimate
protection against leaking battery fluid.The
black felt material is treated with a
proprietary material that neutralizes acid. It
is also a big help for you custom builders
wanting to protect delicate parts of the bike
against excessive heat.The highly reflective
surface of this wrap is capable of
withstanding radiant temperatures in excess
of 1050°C.V-Rod owners especially want to
take a good look at this, since their battery
is flat mounted and therefore more
vulnerable. The kit consists out of an
8" x 40" acid-absorbing and neutralizing
felt wrap, an 8" x 40" aluminized thermal
barrier and an 8" x 12" acid absorbing/
neutralizing felt mat.
741373 Thermotec battery wrap heat
barrier.
BATTERY CABLES
Replacement battery cables for most Harley
models from 1965 to present.
8 1/2” cable with 5/16” (8 mm) and
3/8” eyelet (OEM 70209-65A,
70461-67 & 70011-81). Used on FL
models 1965 and later, FXE models
1973 and later and XL models 1981 and
later as a battery ground strap.
238676 8 1/2" cable
11” cable with 5/16” and 3/8”eyelet
(OEM 70097-75). Used as a positive
battery cable on Sportster models late
1975 to present as well as negative
battery cable for Sportster models
1979 to present and solenoid to starter
cable on FLT models 1980 to present.
238677 11" cable
11 3/4” cable with 5/16” and
3/8” eyelets (OEM 70078-91). Fits
Softail models.
238678 11 3/4" cable
15 1/2” cable with 5/16” and
3/8”eyelets (OEM 70069-65A &
70083-82). Used as a positive battery
cable on Sportster models 1967 thru
early 1975 as well as Sportster models
1982 to present and as a battery to
solenoid and solenoid to starter cable
on FL models 1965 to present.
238679 15 1/2" cable
ACCEL'S BATTERY ELIMINATOR
This trick part eliminates the use of a battery
on kick-start models with magneto ignition.
Boosts spark Voltage at cranking and
eliminates flickering lights at low engine
RPM's. Includes shock-resistant mounting
clamp and attachment hardware. Made in
the USA Must be used with either
ZPN 731513 or ZPN 233722.
231903 Accel battery eliminator
04-082
BATTERY MOUNT STUD FOR XL
Heavy-duty rubber battery tray stud mount
stud for XL from 1995 to present. Has one
5/16 x 1/2" UNC, and one 1/4 x 1/2" UNC
threaded stud (OEM 62569-94).
358220 Battery stud 5/16-18x1/2"
RUBBER BATTERY STRAP
Fits 1991 to present FXST & FLST, 1980 thru
1992 FL(H)T, 1977 thru 1978 XLCR
&1979 XL (OEM 66105-77).
301777 Battery strap
STAINLESS STEEL BATTERY HOLD
DOWN STRAPS
Polished battery straps manufactured from
18-gauge stainless steel to exceed
OEM specifications. Includes nuts and
washers.
301361 Fits FL 1965 thru
1969 (OEM 66383-65T)
301363 Fits FL 1970 thru
1984 (OEM 66383-70T)
301367 Fits FX and XL kickstart models
1970 thru 1978
(OEM 66470-70T)
301364 Fits electric start FX(R) models
(except Softail) 1973 thru
1986 and Sportster models
1982 thru 1997
(OEM 66476-73T)
301533 Fits Sportster models 1998 to
present (OEM 66476-98)
10300002_ZOD_H04_UK_83
1-9-2010
22:02
Pagina 083
Battery Cables & Accessories
BATTERY CABLES AND
HARDWARE
Bad battery or starter motor cables cause
usually starting problems. There can be a
tremendous Voltage drop due to a bad
cable, a bad connection of the cable to the
eyelet or in the connection of the eyelet and
the user.Therefore battery cables should be
regularly checked and if needed renewed.
These battery cable kits allow you to make
a low resistance, high quality cable at any
length. These kits are ideal for Custom Bike
builders and anyone else who wants to use
a different model battery or wants to
relocate the battery carrier. Kits are available
in classic copper cable with high insulating
black covering as well as in super flexible
easy-to-bend silicone jacket cable.The easyto-bend cable has 4 gauge leads, build from
very thin strands. Because of the large
number of these very thin strands there is
less air between the individual strands,
which means that there is more pure copper
to conduct the power from your battery.
Easy-to-bend cables are available in your
choice of translucent black or trans-lucent
red. Our convenient shop kits contain
5 meter of battery cable and a unbreakable
plastic box with 10 eyelets with 1/4” eyes,
10 eyelets with 5/16” eyes and 10 black
shrink sockets to give the finishing touch to
your Custom build cables.The battery cables
are separately available in 5 meter length.
The easy-to-bend translucent cable comes
also in 30 meters. Eyelets and shrink-socket
tubes are separately available in 10 packs.
Shop kits
741180 Kit with 5 meters of classic
black covered copper, cable
741181 Kit with 5 meters of easy-bend
translucent black cable
741182 Kit with 5 meters of easy-bend
translucent red cable
Custom Battery & Starter cable
239231 Classic black covered copper
cable, 5 meter
741185 Easy-bend translucent black,
5 meter
741183 Easy-bend translucent black,
30 meter
741186 Easy-bend translucent red,
5 meter
741184 Easy-bend translucent red,
30 meter
Eyelets and shrink-socket tubes
239236 Eyelets with 1/4" hole, 10 pack
239237 Eyelets with 5/16" hole,
10 pack
236164 Shrink sockets, 9.5 mm,
10 pack
700990 Assortment box, only
BATTERY CARRIER TRAYS
Chrome-plated battery carrier complete with
battery pad, rubber mounting studs, brackets
and all other mounting hardware necessary
for installation.
013108 Fits FL 1970 thru
1984 (OEM 66204-74)
013110 Fits electric start FX (except
FXST) models 1973 thru
1986 (OEM 66191-73)
FLAT BRAIDED GROUND CABLE
Flat braided ground cable with 1/4" and
3/8" hole (OEM 70235-67A, 70461-67 and
70011-81), (6 packs).
238582 Flat braided ground cable
04
WRAP-AROUND BATTERY COVER
The unique designed one-piece battery
cover has the top and side in one and can
be used on both 1991 thru 1996 Dyna Glide
models, as well as 1997 to present Dyna
Glide models. Installs in no time and has a
Show-Chrome finish with black accents
(OEM 66192-99).
301513 Wrap-around battery cover
PLAIN BATTERY COVERS
Show-Chromed covers for electric start FL,
FX, Dyna and Sportster models.
301252 Fits 1973 thru 1985 FXE,
1980 thru 1986 FXWG,
1991 thru 1996 Dyna and
1982 thru 1999 Sportster,
features cell viewing window
(OEM 66070-83T)
301162 Fits all 4 Speed FL models
1970 thru 1984
(OEM 66074-83T)
04-083
10300002_ZOD_H04_UK_84
1-9-2010
22:06
Pagina 084
Battery Accessories
04
BATTERY
COVER
Show-Chromed battery covers with
additional non functional allen screws.These
covers are a perfect match with our other
Racers Only Allen Screw accessories.
301841 Fits all 4 Speed FL and FLH
models from 1970 thru 1984
BATTERY
TOP COVER
Fits electric start FX models 19731986 (except Softails) and all Sportster
models 1982 to present (OEM 66367-73T).
301159 Battery Top cover
BATTERY
TOP COVER
Fits all Dyna Glide models from 1991 thru
1996.
302063 Battery top cover
301834 Fits 1973 thru 1985 FXE, 1980
thru 1986 FXWG, 1991 thru
1996 Dyna and 1982 thru 1999
Sporster
LOUVERED
CHROME
BATTERY
COVERS
301200 Fits all 4 Speed FL and FLH
models from 1970 thru 1984
301202 Fits 1973 thru 1985 FXE,
1980 thru 1986 FXWG,
1991 thru 1996 Dyna and
1982 thru 1999 Sportster
RAISED STYLE BATTERY COVER
Show-Chrome battery cover, features raised
panel and oval cell viewing windows
(OEM 66347-91)
301883 Fits 1973 thru 1985 FXE,
1980 thru 1986 FXWG,
1991 thru 1996 Dyna and
1982 thru 1999 Sportster
04-084
BATTERY
COVER
Show-Chrome battery cover, fits 1997 to
present Dyna Glide models (OEM 66375-97).
301515 Battery cover
BATTERY
COVER
If you are tired of the battery sticking out
above your oil tank and under your seat on
your Softail, here's something that will stop
you bothering about it. This Chrome-plated
cover slips over the battery and dresses up
that area of your motorcycle. Fits all Softail
models from 1984 thru 1990.
301831 Battery Cover
TOP COVER
Chrome-plated battery top cover for electric
start Sportster models 1967-1978
(OEM 66369-67).
301257 Top Cover
BATTERY
HOLD
DOWN KIT
AND
FENDER
ACCESSORIES
Completely Chrome-plated hold down kit
for early 6 Volt Big Twins with Horse-Shoe oil
tank. All parts are inter-changeable with
OEM parts.
301534 Complete kit (as shown)
(OEM 66390-36)
301360 Rod set (OEM 66390-58 &
66393-58)
301233 Top cover (OEM 66373-54TA)
310213 Bottom plate (OEM 62575-36)
011335 Bottom plate bracket
(OEM 62585-36)
CHROME IGNITION MODULE
COVER
This show Chromed ignition module cover
replaces the black Original Equipment part
on all 1991 and later Dyna Glide models.
Covers are available in your choice of plain,
slotted or louvered (OEM 66333-90).
302054
Plain Ignition
module cover
302055
Ignition
module cover
with Louvers
BATTERY TOP COVERS
Battery top covers for Big-Twins.
301158 Fits FL models 19651984 (OEM 66370-65TE)
302056
Ignition
module cover
with black
slots