D../CRCW.... e3 Vishay Lead (Pb)-free Thick Film, Rectangular Chip Resistors FEATURES • High volume product suitable for commercial and special applications • Metal glaze on high quality ceramic • Protective overglaze • Lead (Pb)-free solder contacts on Ni barrier layer • Pure tin plating provides compatibility with lead (Pb)-free and lead containing soldering processes • Compatible with “Restriction of the use of Hazardous Substances” (RoHS) directive 2002/95/EC (issue 2004) • Excellent stability (ΔR/R ≤ 1 % for 1000 h at 70 °C) STANDARD ELECTRICAL SPECIFICATIONS SIZE MODEL CRCW0201 INCH METRIC 0201 0525 POWER RATING P70 °C W LIMITING ELEMENT VOLTAGE MAX V≅ 0.05 30 RESISTANCE TEMPERATURE TOLERANCE RANGE E-SERIES COEFFICIENT % Ω ppm/K ± 100 ± 200 ±1 ±5 47R - 1M0 10R - 1M0 24 + 96 24 ±1 ±5 1R0 - 10M 24 + 96 24 ±1 ±5 1R0 - 10M 24 + 96 24 ±1 ±5 1R0 - 10M 24 + 96 24 ±1 ±5 1R0 - 10M 24 + 96 24 ±1 ±5 1R0 - 10M 24 + 96 24 ±1 ±5 1R0 - 2M2 24 + 96 24 ±1 ±5 1R0 - 10M 24 + 96 24 ±1 ±5 1R0 - 10M 24 + 96 24 Zero-Ohm-Resistor: Rmax = 50 mΩ, Imax at 70 °C = 1.0 A D10/CRCW0402 0402 1005 0.063 50 ± 100 ± 200 Zero-Ohm-Resistor: Rmax = 20 mΩ, Imax at 70 °C = 1.5 A D11/CRCW0603 0603 1608 0.10 75 ± 100 ± 200 Zero-Ohm-Resistor: Rmax = 20 mΩ, Imax at 70 °C = 2.0 A D12/CRCW0805 0805 2012 0.125 150 ± 100 ± 200 Zero-Ohm-Resistor: Rmax = 20 mΩ, Imax at 70 °C = 2.5 A D25/CRCW1206 1206 3216 0.25 200 ± 100 ± 200 Zero-Ohm-Resistor: Rmax = 20 mΩ, Imax at 70 °C = 3.5 A CRCW1210 1210 3225 0.33 200 ± 100 ± 200 Zero-Ohm-Resistor: Rmax = 20 mΩ, Imax at 70 °C = 4.0 A CRCW1218 1218 3246 1.0 200 ± 100 ± 200 Zero-Ohm-Resistor: Rmax = 20 mΩ, Imax at 70 °C = 7.0 A CRCW2010 2010 5025 0.50 400 ± 100 ± 200 Zero-Ohm-Resistor: Rmax = 20 mΩ, Imax at 70 °C = 5.0 A CRCW2512 2512 6332 1.0 500 ± 100 ± 200 Zero-Ohm-Resistor: Rmax = 20 mΩ, Imax at 70 °C = 7.0 A Notes • These resistors do not feature a limited lifetime when operated within the permissible limits. However, resistance value drift increasing over operating time may result in exceeding a limit acceptable to the specific application, thereby establishing a functional lifetime • Marking and packaging: see appropriate catalog or web pages • Power rating depends on the max. temperature at the solder point, the component placement density and the substrate material Document Number: 20035 Revision: 05-Mar-07 For technical questions in Europe, contact: ff3cresistors@vishay.com For technical questions in Americas/Asia, contact: ff2bresistors@vishay.com www.vishay.com 107 D../CRCW.... e3 Lead (Pb)-free Thick Film, Rectangular Chip Resistors Vishay TECHNICAL SPECIFICATIONS PARAMETER UNIT CRCW0201 D10/ CRCW0402 D11/ D12/ D25/ CRCW1210 CRCW1218 CRCW2010 CRCW2512 CRCW0603 CRCW0805 CRCW1206 Rated Dissipation at 70 °C3) W 0.05 0.063 0.10 0.125 0.25 0.33 1.0 0.5 1.0 Limiting Element Voltage2) V≅ 30 50 75 150 200 200 200 400 500 Insulation Voltage (1 min) Vpeak 50 > 75 > 100 > 200 > 300 > 300 > 300 > 300 > 300 Thermal Resistance1) K/W ≤ 870 ≤ 550 ≤ 440 ≤ 220 ≤ 140 ≤ 65 ≤ 88 ≤ 65 Insulation Resistance Ω > 109 Category Temperature Range °C - 55/+ 125 (+ 155) Failure Rate h-1 1.10-9 g 0.17 29.5 25.5 40.5 Weight/1000 pcs 0.3 • 10-9 0.65 2 5.5 10 16 Notes 1. For sizes 0402 until 1206 the measuring conditions are in acc. to EN 140401-802. For all other sizes the result depends on the solder pad dimensions. 2. Rated voltage: PxR 3. The power dissipation on the resistor generates a temperature rise against the local ambient, depending on the heat flow support of the printed-circuit board (thermal resistance). The rated dissipation applies only if the permitted film temperature of 155 °C is not exceeded. PART NUMBER AND PRODUCT DESCRIPTION PART NUMBER: CRCW0603562RFKEC1) C MODEL CRCW0201 CRCW0402 CRCW0603 CRCW0805 CRCW1206 CRCW1210 CRCW1218 CRCW2010 CRCW2512 R C W 0 VALUE R = Decimal K = Thousand M = Million 0000 = Jumper 6 0 3 5 6 TOLERANCE F = ± 1.0 % J = ± 5.0 % Z = Jumper PRODUCT DESCRIPTION: D11/CRCW0603 100 562R 1 % ET6 2 R TCR K = ± 100 ppm/K N = ± 200 ppm/K 0 = Jumper S = Special F K E C PACKAGING2) EA, EB, EC, ED, EE, EF, EG, EH, EI, EK, EL, EY SPECIAL up to 2 digits e3 D11/CRCW0603 100 562R 1% ET6 e3 MODEL CRCW0201 D10/CRCW0402 D11/CRCW0603 D12/CRCW0805 D25/CRCW1206 CRCW1210 CRCW1218 CRCW2010 CRCW2512 TCR ± 200 ppm/K ± 100 ppm/K RESISTANCE VALUE 10R = 10 Ω 562R = 562 Ω 10K = 10.0 k Ω 1M = 1 MΩ 0R0 = Jumper TOLERANCE ±5% ±1% PACKAGING2) ET1, ET5 ET6, ET7 EF4, E02 E67, E82 EG1, ET9 E20, E27 LEAD (Pb)-FREE e3 = Pure Tin Termination Finish Notes 1. Preferred way for ordering products is by use of the PART NUMBER 2. Please refer to table PACKAGING, see next page www.vishay.com 108 For technical questions in Europe, contact: ff3cresistors@vishay.com For technical questions in Americas/Asia, contact: ff2bresistors@vishay.com Document Number: 20035 Revision: 05-Mar-07 D../CRCW.... e3 Lead (Pb)-free Thick Film, Rectangular Chip Resistors Vishay PACKAGING REEL MODEL TAPE WIDTH CRCW0201 8 mm D10/CRCW0402 8 mm D11/CRCW0603 8 mm D12/CRCW0805 D25/CRCW1206 CRCW1210 8 mm 8 mm 12 mm DIAMETER PITCH PIECES/ REEL 180 mm/7" 330 mm/13" 180 mm/7" 330 mm/13" 180 mm/7" 2 mm 2 mm 2 mm 2 mm 4 mm 10 000 50 000 10 000 50 000 5000 BULK PACKAGING CODE PACKAGING CODE PART NUMBER PRODUCT DESC. PIECES PART PRODUCT NUMBER DESC. PAPER BLISTER PAPER BLISTER ED ET7 EE EF4 ED ET7 50 000 EY E27 EE EF4 EA EI ET1 EG1 285 mm/11.25" 4 mm 10 000 EB 330 mm/13" 4 mm 20 000 EC EL ET6 E20 180 mm/7" 4 mm 5000 EA EI ET1 EG1 285 mm/11.25" 4 mm 10 000 EB 330 mm/13" 4 mm 20 000 EC EL EI 180 mm/7" 4 mm 5000 EA 285 mm/11.25" 4 mm 10 000 EB 330 mm/13" 4 mm 20 000 EC 180 mm/7" 4 mm 5000 EA ET5 ET5 ET6 E20 ET1 EG1 EL ET6 285 mm/11.25" 4 mm 10 000 EB ET5 330 mm/13" 4 mm 20 000 EC ET6 10 000 EY E27 E20 12 mm 180 mm/7" 4 mm 4000 EK ET9 12 mm 180 mm/7" 4 mm 4000 EF E02 8 mm 2000 EG E67 4 mm 4000 EH E82 180 mm/7" E27 ET1 CRCW2010 12 mm EY ET5 CRCW1218 CRCW2512 25 000 DIMENSIONS SIZE INCH METRIC L DIMENSIONS [in millimeters] W H T1 0201 0525 0.6 ± 0.05 0.3 ± 0.05 0402 1005 0603 1608 1.0 ± 0.05 0.5 ± 0.05 1.55 + 0.10 0.85 ± 0.1 - 0.05 2012 2.0 + 0.20 0805 - 0.10 1206 3216 3.2 + 0.10 1210 3225 - 0.20 0.35 ± 0.05 0.25 ± 0.05 0.2 ± 0.1 0.45 ± 0.05 0.3 ± 0.2 0.3 ± 0.2 1.25 ± 0.15 0.45 ± 0.05 0.3 + 0.20 0.3 ± 0.2 1.6 ± 0.15 0.55 ± 0.05 0.45 ± 0.2 0.4 ± 0.2 2.5 ± 0.2 0.55 ± 0.05 0.45 ± 0.2 0.4 ± 0.2 4.6 ± 0.15 0.55 ± 0.05 0.45 ± 0.2 0.4 ± 0.2 1218 3246 3.2 ± 0.2 3.2 + 0.10 2010 2512 5025 6332 5.0 ± 0.15 2.5 ± 0.15 6.3 ± 0.2 3.15 ± 0.15 - 0.20 - 0.10 - 0.10 Document Number: 20035 Revision: 05-Mar-07 0.6 ± 0.1 0.6 ± 0.1 0.6 ± 0.2 0.6 ± 0.2 SOLDER PAD DIMENSIONS [in millimeters] REFLOW SOLDERING WAVE SOLDERING METRIC a b l a b l 0525 0.28 0.43 0.23 1005 0.4 0.6 0.5 1608 0.5 0.9 1.0 0.9 0.9 1.0 2012 0.7 1.3 1.2 0.9 1.3 1.3 3216 0.9 1.7 2.0 1.1 1.7 2.3 3225 0.9 2.5 2.0 1.1 2.5 2.2 3246 1.05 4.9 1.9 1.25 4.8 1.9 5025 1.0 2.5 3.9 1.2 2.5 3.9 6332 1.0 3.2 5.2 1.2 3.2 5.2 SIZE T2 + 0.05 0.15 0.23 ± 0.05 0.15 ± 0.05 INCH 0201 0402 0603 0805 1206 1210 1218 2010 2512 0.6 ± 0.2 0.6 ± 0.2 For technical questions in Europe, contact: ff3cresistors@vishay.com For technical questions in Americas/Asia, contact: ff2bresistors@vishay.com www.vishay.com 109 D../CRCW.... e3 Vishay Lead (Pb)-free Thick Film, Rectangular Chip Resistors FUNCTIONAL PERFORMANCE Pulse Load Pmax (W) Single Pulse 1000 2512 1218 2010 1206 0805 0603 0402 100 10 1 0.1 0.01-6 10 10-5 10-4 10-3 10-2 10-1 1 10 Pulse Duration ti (s) Maximum pulse load, single pulse; applicable if P 0 and n ≤ 1000 and U ≤ Umax; for permissible resistance change equivalent to 8000 h operation Continuous Pulse Load Pmax (W) Continuous Pulse 100 1218 1206 0805 10 0603 0402 1 0.10 0.01 -6 10 10-5 10-4 10-3 10-2 10-1 1 10 Pulse Duration ti (s) Maximum pulse load, continuous pulses; applicable if P ≤ P (ϑamb) and Û ≤ Ûmax; for permissible resistance change equivalent to 8000 h operation Pulse Voltage Ûmax (V) Pulse Voltage 2000 2512 1800 1600 2010 1400 1200 1000 800 1206/1210/1218 600 400 0805 0603 200 0 -6 10 0402 10-5 10-4 10-3 10-2 10-1 1 10 Pulse Duration ti (s) Maximum pulse voltage, single and continuous pulses; applicable if P ≤ Pmax; for permissible resistance change equivalent to 8000 h operation www.vishay.com 110 For technical questions in Europe, contact: ff3cresistors@vishay.com For technical questions in Americas/Asia, contact: ff2bresistors@vishay.com Document Number: 20035 Revision: 05-Mar-07 D../CRCW.... e3 90 80 0402 0603 0805 1206 1210 70 60 50 Rated Power in % Temperature Rise in °C Lead (Pb)-free Thick Film, Rectangular Chip Resistors 2010 Vishay 120 100 80 60 40 2512 30 40 1218 20 20 10 0 0.1 0.2 0.3 Non-Linearity A3 in dB Temperature Rise 0.4 Power in Watts 110 100 90 80 1206 0805 0603 0402 70 60 0 - 55 0.5 50 - 25 0 25 50 Derating Current Noise in µV/V 0 75 100 125 150 175 70 Ambient Temperature in °C 100 2 040 10 3 060 5 080 6 120 1 40 30 20 10 0.1 100 1K Non-Linearity Document Number: 20035 Revision: 05-Mar-07 10K 100K 1M 10M Resistance Value in Ω 100 1K 10K Current Noise For technical questions in Europe, contact: ff3cresistors@vishay.com For technical questions in Americas/Asia, contact: ff2bresistors@vishay.com 100K 1M 10M Resistance Value in Ω www.vishay.com 111 D../CRCW.... e3 Lead (Pb)-free Thick Film, Rectangular Chip Resistors 140 140 120 120 Temperature rise in ϑü °C Vishay 100 02 04 05 08 6 03 06 120 80 60 40 100 ϑü 40 80 C °C 60 °C 80 60 °C 0° C 10 40 0° 20 20 C C 0° 14 0 20 0 0.4 0.3 0.2 0.1 0 40 60 80 100 120 140 160 180 Film temperature ϑs in ° C Load in W 0.01 0 10 0 00 0.1 h h 0 00 0 h 10 500 00 h 20 00 10 0.01 Resistance change [ΔR/R] in % after 1000 h ΔR/R (t) = f [ΔR/R (t = 1000 h)] Parameter: time t= =2 12 ϑü = f [P]] Parameter: size 0.5 0° ϑü = f [ϑs] Parameter: ϑu ≤1 0K ≤1 M 0.1 ≤1 0M ΔR/R [t = 1000 h] = f [ϑs] Parameter: resistance value h 1 10 1 Resistance change ΔR/R % 0.1 1 20 0.01 40 60 80 120 ϑü =[°C] Stability nomogram typical values (for handling see general explanations) 100 120 140 160 180 Film temperature ϑs in ° C 100 C 0° ϑu =2 80 C 0° ϑ u =4 60 0.25 W C 0° ϑu =6 40 C 0° 0.125 W ϑu =8 20 0.0625 W 00 ϑu 1 2 3 5 7 10 2 3 number of mounted resistors [pcs] 5 7 100 2 3 5 7 60 80 =1 °C 20 ϑu =1 °C 100 120 140 surface temperature ϑs [°C] Power rating as a function of packaging density (guideline) www.vishay.com 112 For technical questions in Europe, contact: ff3cresistors@vishay.com For technical questions in Americas/Asia, contact: ff2bresistors@vishay.com Document Number: 20035 Revision: 05-Mar-07 D../CRCW.... e3 Lead (Pb)-free Thick Film, Rectangular Chip Resistors Vishay TEST PROCEDURES AND REQUIREMENTS EN 60115-1 REQUIREMENTS PERMISSIBLE CHANGE (ΔR/R) TEST (clause) CONDITIONS OF TEST STABILITY CLASS 1 STABILITY CLASS 2 OR BETTER OR BETTER SIZE 0201 ONLY REQUIREMENTS PERMISSIBLE CHANGE (ΔR/R) stability for product types: D../CRCW....e3 1 Ω to 10 MΩ 1 Ω to 10 MΩ 10 Ω to 1 MΩ ±1% ±5% ± 1 %; ± 5 % ± 100 ppm/K ± 200 ppm/K ± 200 ppm/K ± (0.25 % R + 0.05 Ω) ± (0.5 % R + 0.05 Ω) ± (1 % R + 0.05 Ω) Resistance (4.5) - Temperature coefficient (4.8.4.2) 20/- 55/20 °C and 20/125/20 °C Overload (4.13) U = 2.5 × (P70 × R)1/2 ≤ 2 × Umax; Duration: according the style Solderability (4.17.5) Aging 4 h at 155 °C, dryheat Solder bath method; 235 °C; 2 s Visual examination Resistance to soldering heat (4.18.2) Solder bath method; (260 ± 5) °C; (10 ± 1) s ± (0.25 % R + 0.05 Ω) ± (0.5 % R + 0.05 Ω) ± (1 % R + 0.05 Ω) Rapid change of temperature (4.19) 30 min. at LCT = - 55 °C; 30 min. at UCT = 125 °C; 5 cycles ± (0.25 % R + 0.05 Ω) ± (0.5 % R + 0.05 Ω) ± (0.5 % R + 0.05 Ω) Damp heat, steady state (4.24) (40 ± 2) °C; 56 days; (93 ± 3) % RH ± (1 % R + 0.05 Ω) ± (2 % R + 0.1 Ω) ± (2 % R + 0.1 Ω) Climatic sequence (4.23) 16 h at UCT = 125 °C; 1 cycle at 55 °C; 2 h at LCT = - 55 °C; 1 h/1 kPa at 15 °C to 35 °C; 5 cycles at 55 °C U = (P70 × R)1/2 U = Umax; whichever is less severe ± (1 % R + 0.05 Ω) ± (2 % R + 0.1 Ω) ± (2 % R + 0.1 Ω) Endurance at 70 °C (4.25.1) U = (P70 × R)1/2 U = Umax; whichever is less severe 1.5 h on; 0.5 h off; 70 °C; 1000 h ± (1 % R + 0.05 Ω) ± (2 % R + 0.1 Ω) ± (3 % R + 0.1 Ω) Extended endurance (4.25.1.8) Duration extended to 8000 hours ± (2 % R + 0.1 Ω) ± (4 % R + 0.1 Ω) ± (4 % R + 0.1 Ω) Endurance at upper category temperature (4.25.3) UCT = 125 °C; 1000 h ± (1 % R + 0.05 Ω) ± (2 % R + 0.1 Ω) ± (2 % R + 0.1 Ω) Good tinning (≥ 95 % covered) no visible damage APPLICABLE SPECIFICATIONS • EN 60115-1 Generic Specification • EN 140400 Sectional Specification • EN 140401-802 Detail Specification • IEC 60068-2-X Variety of environmental test procedures • IEC 60286-3 Packaging of SMD components Document Number: 20035 Revision: 05-Mar-07 For technical questions in Europe, contact: ff3cresistors@vishay.com For technical questions in Americas/Asia, contact: ff2bresistors@vishay.com www.vishay.com 113 Legal Disclaimer Notice Vishay Notice Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc., or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies. Information contained herein is intended to provide a product description only. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Vishay for any damages resulting from such improper use or sale. Document Number: 91000 Revision: 08-Apr-05 www.vishay.com 1