208 Series Bus Bar Bus Bar for Power Distribution Distribution of electrical current for aircraft equipment. Designed for aircraft equipment Bus bar allow the connection of circuit breakers. Feeding through cable equipped with terminals. Easy to install Screw mounting. Flight proven Used on major Airbus programs: A320, A321, A319, A318. Airbus qualified Bus bar D0001030 600 - 208S001. 208 Series | Bus Bar Description • Bus bar allowing the connection of circuit breakers. • Feeding through cables equipped with terminals. All information in this document presents only general particulars and shall not form part of any contract. All rights reserved to SOURIAU for changes without prior notification or public announcement. Any duplication is prohibited, unless approved in writing. • Distribution of electrical current for aircraft equipment. Ordering information • Part number: 208S001 Technical features Mechanical • Shell: thermoplastic UL 94V0 • Phase bar: copper • Coating resin: black epoxy Electrical Environmental • Current rating per phase: 164 A • Working temperature: -15°C to +75°C • Withstanding voltage: 1500 Vrms • Damp heat: 21 days / 40°C / 93% RH • Insulation resistance: > 500 MΩ at 500 Vdc • Resistance to salt spray: 48 hours • Termination: for breaker 8-32UNC3B Dimensions 5.5 3 nuts 10.32 UNC 3B A Copper bar thickness: 1.5mm nickel plating 5.3 52 30° WPN208WUSEN01 © Copyright SOURIAU Jan 2014 - SOURIAU is a registered trademark. 15 nuts 8.32 UNC 3B A 22 17.5 17.5 17.5 17.5 17.5 17.5 58 23 Compound 44.2 343.5 Nut-anchor .1380 UNJC 3B floating 8.5 16 Note: All dimensions are in millimeters (mm) For further information contact us at contactmilaero@souriau.com or visit our web site www.souriau.com 2