This year’s candidates
CORE Theatre Worklight
ETC Source Four Dimmer
ETC Source Four LED
Martin Mac Aura
Robert Juliat TIBO
ShowTex Acoustic Baffle
State Automation INCAND-Air
Manufacturer
CORE Lighting
Product
CORE Theatre Worklight
Product Type
Theatre Worklight
Manufacturer’s DescriptionThe CORE Theatre Worklight is a mains dimmable work light for
theatre task lighting that can be dimmed directly from existing
undimmed mains circuits using existing switches. It may also be
switched to blue lighting during performance. The fixtures may
be attached to truss, ceilings or walls and can directly replace
existing fixtures.
Costs are significantly reduced with LED technology improving
light output and providing energy savings using around 1/7th of
the power of halogen fixtures. Dimming mode conserves more
energy. With over 50,000 hours’ life expectancy, bulb replacement
and maintenance are virtually eliminated too.
The units consume around 1/7th of the power of existing halogen
work light fixtures and LED lifespan is many years (over 50,000
hours) compared with a few hundred hours for halogen bulbs.
For a small 10 unit installation this will save around 10,000kWh
per year – or £2,000 in electricity and bulb replacement cost
[7hrs daily/5day week run time]. This justifies replacing existing
fixtures with a payback of between 1 and 2 years. For new
installations the payback is less than 1 year; and of course the
energy saving significantly benefits the ‘green’ energy and carbon
footprint issue.
Lamp/source type
LED
Nominal standby power consumption
in watts
0 Watts
Nominal power consumption at 100% output in watts
95W at 240V AC Input to power supply.
82W into LED circuit.
Rated lamp/source life
50,000Hrs
Weight
4Kg
Primary construction material(s)
Powdercoat Aluminium & Mild Steel
Power connector
Terminal Block – Other connectors available
Disposal method/recycling options
Standard metal recycling & Electronics PCB
recycling systems
Disposal method/recycling options
*p01*
Manufacturer
Electronic Theatre Controls
Product
Source Four Dimmer
Product Type
Single dimmer
Manufacturer’s Description
Get more than 1200W of light from a 575W luminaire With
the addition of a Source Four Dimmer, ETC Source Four
ellipsoidal profiles outperform typical 230V/1200W European
condenser profiles. Our new ES dimming technology regulates
230V input down to 115V output, increasing the brightness by
using 115V HPL lamps without drawing more power. The Source
Four Dimmer can be used to retrofit your current inventory
or as a complete luminaire. Available for Source Four, Source
Four jr, Source Four PAR, Source Four PARNel and Source
Four Fresnel. Product features: Luminaire mounted dimmer;
Boosts output with up to 30% by using 115V HPL lamps;
Stand-alone operation; Convection cooled, no fans; ES technology
provides noise-free operation and output-voltage reduction
for higher efficiency (Lumens per watt); Built-in dimming
curves; DMX/RDM in and thru.
Lamp/source type
Tungsten HPL 115V in 375W, 575W and 750W
Nominal standby power consumption
in watts
3.4 Watts
Nominal power consumption at
100% output in watts
375W, 575W or 750W depending on lamp mounted
Rated lamp/source life
300h (theatre grade) or 1500h (Long life)
Weight
1.9kg
Primary construction material(s)
Extruded aluminium housing w. heatsink
Power connector
Owner’s choice
Disposal method/recycling options
WEEE
*p02*
Manufacturer
Electronic Theatre Controls
Product
Source Four LED
Product Type
Ellipsoidal Profile Spotlight
Manufacturer’s DescriptionSource Four LED™ feature the same size, look, optics and beam
angles as a traditional Source Four®, with an increased efficiency
from typically 13.5 lumens per watt to now between 32 and 42
lumens per watt. Three times higher! The Source Four LED
Lustr®+ luminaire also features the superior capabilities of the
x7 Color System™ to offer the most flexible range of colours
available in current entertainment LED fixtures. From highintensity whites to soft tints and supple, vibrant colours provide
you with theatre-quality colour rendering. The Source Four LED
Lustr+ also produces an adjustable white light that flatters any
skin tone. Source Four LED is also available in 3000K warm
white tungsten and 5600K cool white versions. Lifetime of LED
array estimated to 50,000 hours compared with similar traditional
high-wattage incandescent luminaires limited to between 300
and 1500 hours.
Lamp/source type
LED (Luxeon Rebel)
Nominal standby power consumption
in watts
5.6W (Lustr+), 4.1W (Daylight & Tungsten versions)
Nominal power consumption at
100% output in watts
135.9W (Lustr+), 156.9W (Daylight), 155.7W (Tungsten)
Rated lamp/source life
50,000 hours
Weight
From 9Kg incl. Lens Tube
Primary construction material(s)
Aluminium
Power connector
PowerCon
Disposal method/recycling options
WEEE
*p03*
Manufacturer
Martin Professional
Product
Mac Aura
Product Type
Moving head, wash luminaire
Manufacturer’s DescriptionThe MAC Aura is very efficient, delivering almost 4000 lumens
of output in an ultra-compact 5.6 kg package for a performance
to size ratio that you don’t find in comparable fixtures – more
lumens per watt with a better lumens per watt and lumens per
kilo ratio than competitor fixtures. Current consumption is a low
1.0 amp and the fixture is extremely quiet. That efficient, high
quality LED optical system is unique in another way as well.
The MAC Aura is the first LED moving head wash light to
combine two LED illumination systems – multicolor beam
LEDs and a mood-generating backlight LED array – that takes
the synthetic, pixelated look out of LED wash lights for
a more natural look.
Lamp/source type
LED – RGBW – Osram Ostar
Nominal standby power consumption
in watts
<15 W
Nominal power consumption at
100% output in watts
260 W
Rated lamp/source life
50,000 hours
Weight
5.6 kg
Primary construction material(s)Aluminium
/ Housing: High-impact flame-retardant
thermoplastic
Power connectorAC
power input: Neutrik PowerCon / AC power
throughput: Neutrik PowerCon
Disposal method/recycling options
*p04*
WEEE
Manufacturer
Robert Juliat
Product
TIBO
Product Type
LED profile spot
Manufacturer’s DescriptionRobert Juliat’s TIBO 85W LED profile spot is a versatile, safe and
powerful fixture. Its superb optical system allows two different
zoom ranges (15°-35° and 15°-45°) in one single unit, saving on
material costs and storage of separate lens tubes. It also ensures
perfect projection and enables the use of plastic gobos. The
addition of a new locking true mains connector guarantees a safe
and easy power connection and cost-effective daisy-chain layouts.
Available in 3 distinct colour temperatures, TIBO’s cool LED
source is safe to use in all public areas. With no UV/IR emissions,
TIBO is ideal for heritage environments or illuminating delicate
and light sensitive objects. TIBO demonstrates outstanding
light output with low energy consumption and running costs.
Continuous 360° rotation of the lens tube gives maximum
flexibility. Bespoke-coloured bodywork options ensure TIBO
fits aesthetically into any application. Smaller, lighter and more
stylish than its predecessor, TIBO lends itself to architectural and
event applications as well as traditional entertainment lighting.
Lamp/source type
LED
Nominal standby power consumption
in watts
5 watts
Nominal power consumption at
100% output in watts
90 watts
Rated lamp/source life
50,000 hours
Weight
10 kg
Primary construction material(s)
Die-cast aluminium housing
Power connector
PowerCon True1
Disposal method/recycling options
WEEE
*p05*
Manufacturer
ShowTex
Product
Acoustic Baffle
Product Type
Acoustic textile
Manufacturer’s DescriptionThe Acoustic Baffle from ShowTex proves ecology and noise
level control can go hand in hand. The new acoustic fabric
panels are made from 100% recycled material compressed
together to optimize sound conditions. Independent laboratory
research confirms the Acoustic Baffle from ShowTex achieves
better absorption of very low frequency sound levels than
any other baffle on the market today with just half the fabric
thickness of other systems. Two baffles installed on a truss with
an air gap of 30 cm. provide maximum sound absorption. The
Flame Retardant Acoustic Baffle comes in 2 sizes (2m long and
3 m long) and can be installed modularly for extra flexibility.
By combining the two standard formats, nearly any height or
area can be covered. The Acoustic Baffle can be installed as a
ceiling lining or around curves and corners. Custom formats and
/or colours are available by request. The panels are finished off
with Velcro for connecting together easily and can be used for
temporary and fixed installations.
Weight
13.8 kg
Primary construction material(s)
100% recycled filling covered in recycled wool
Disposal method/recycling options
Return to supplier for disposal/compostable
*p06*
Manufacturer
State Automation
Product
INCAND-Air 30 LED downlight
Product Type
Theatre House Light LED with ‘Mimic’ Feature
Manufacturer’s DescriptionLumascape’s INCAND-Air 30 is a high-power LED based
downlight system developed for retrofitting into the mounting
hardware of existing high power downlights, or for use as
a complete luminaire for new installations.
INCAND-Air 30 features a specifically developed LED light
engine based on an array of 30 x Red, Green, Blue, White
and Amber Luxeon LEDs.
The INCAND-Air 30 is capable of producing beautiful, highCRI whites of any CCT and accurately replicates the colour
temperature shift that is characteristic of halogen lamps when
dimmed. The use of RGBWA gives the added benefit of an ability
to produce not only excellent whites, but rich, vivid colours.
Light output and LED life have been maximised through the
employment of a highly effective thermal management system
The junction temperatures of the LEDs are maintained at a
lecvel low enough to provide 70% Lumen maintenance after
60,000 hours.
Lamp/source type
LED
Nominal standby power consumption
in watts
0 Watts
Nominal power consumption at
100% output in watts
35 watts (INCANDESCCENT mode)
Rated lamp/source life
60,000
Weight
3.2 kg
Disposal method/recycling options
Return to supplier/manufacturer for disposal
*p07*