E9-RCL / E9-RCL-CR
Wildlife Lighting
Certification Number
2012-010
E9-RCL:
E9-RCL-CR:
Recessed, rectangular, louvered, brass steplight with
surface-mounted trim.
Recessed, rectangular, louvered, brass steplight with a
CONCRETE RING for recessed trim.
Construction
Solid brass faceplate. Copper outer housing with wiring
compartment, (2) 1/2” NPT end taps in rear, (2) #6-32 black
oxide stainless steel screws.
Lens
Tempered, frosted soda lime glass.
Voltage
12 Volts AC. Remote transformer required.
Recessed in concrete with exposed faceplate.
E9-RCL-CR: Same as E9-RCL but with concrete ring
for fully recessed installation.
Suitable for indoor or outdoor installation. Both fixtures
suitable for installation in wood for LED sources only.
COPPER HOUSING
0.080" [2mm] WALL
E9-RCL
E9-RCL:
S
3.0" [7.6cm]
Lamps
MR16 LED, GU5.3
Cree chipset
Amber (1500K)
Optical
Accessories
__ 5W-A-NFL 5 Watt Amber
25° narrow flood
Wavelength:
597.5 nanometers (dominant)
599.7 nanometers (peak)
__ HL1
__ HL2
__ PR
__ RT
Honeycomb louver, 1/8” [3mm] thick
Honeycomb louver, 1/4” [6mm] thick
Prismatic spread lens
Rectilinear spread lens
4.0" [10.2cm]
0.25" [0.6cm]
5.0" [12.8cm]
E9-RCL-CR
SOLID BRASS FACEPLATE
Finish: Unfinished is standard; no specification required. The fixture will 3.3" [8.3cm]
weather to a natural patina. The patina process is natural with brass and copper.
Rate of patina and eventual color is dependent upon climate and proximity to
the ocean. Thus, Beachside does not guarantee any specific appearance.
4.3" [10.9cm]
0.35" [0.9cm] CONCRETE RING
5.4" [13.7cm]
1/2" NPT
Weight: 4.4 lbs. [2.0 kg]
IP 67
CSA Listed, file #190030
10 year fixture warranty
3 year warranty on MR16 LED lamps
Project
E9-RCL-
Fixture
Ø2.6"
[6.6cm]
(2) SIDE THRU HOLES
FOR OPTIONAL ENTRY
E9 SOLID
BRASS PLUG
MADE IN USA
By
For ordering purposes, please specify (example: E9-RCL-CR―5W-A-NFL―PR)
Lamp
Date
Accessory(ies)
BEACHSIDE LIGHTING ● 800-405-6732 ● www.BeachsideLighting.com
September 2015