Sensors | Maestro wallbox occupancy/vacancy sensors
®
2.94 in (75 mm)
Product family features
Available as a dimmer or switch with sensor
•
Will turn lights on as you enter a room and
off after the room is vacated
•
Occupancy/vacancy (auto-on/auto-off or
manual-on/auto-off) or vacancy-only (manual-on/
auto-off) versions available
•
Vacancy models meet California Title 24
Section 119 ( j) requirements
•
4.69 in (119 mm)
eco-dim® model available
•
120/277 VAC dual voltage switch option
•
Sensor must have unobstructed view and
line-of-sight to room occupants
•
180˚ sensor field-of-view
•
Passive infrared motion detection with dependable
Lutron XCTTM technology for fine motion detection
•
Up to 30 ft x 30 ft major motion and 20 ft x 20 ft
minor motion coverage
•
• Mechanical air-gap to disconnect load power
.30 in
(7.6 mm) (dimmer only)
profile • Not compatible with power boosters
Coordinating Claro®, Satin Colors® and Stainless
Steel wallplates only available separately
•
Shown actual size: Maestro dimmer with
occupancy/vacancy sensor and 1-gang
Claro® wallplate in White (WH).
Engraving and custom colors available, for
additional information, see pg. 164
•
Control types
Single-pole (one location)
-way—available for switch version only
3
(two locations)
Multi-location (up to 10 locations)
Direct load type compatibility
Dimmer
Incandescent/halogen lighting
Switch
Download Maestro sensing dimmer
specification submittal
Download Maestro sensing switch
specification submittal
Download high resolution product image
Incandescent/halogen lighting
Dimmable CFL/LED lighting (screw-base)
Magnetic low-voltage lighting
Electronic low-voltage lighting
Fluorescent lighting
| 1.800.523.9466 | www.lutron.com/specificationguide
Volume 1 P/N 367-1746 REV B
137
Sensors | Maestro wallbox occupancy/vacancy sensors
®
Available finishes
Use BOLD color code in model number (Example: MS-OP600M-MN)
Gloss finishes*
LA
Light Almond
AL
Almond
IV
Ivory
GR
Gray
BR
Brown
BL
Black
SW
Snow
LS
Limestone
BI
Biscuit
ES
Eggshell
PD
Palladium
TP
Taupe
ST
Stone
BG
Bluestone
PL
Plum
SG
Sea Glass
TQ
Turquoise
GS
Goldstone
DS
Desert Stone
GB
Greenbriar
MS
Mocha Stone
TC
Terracotta
SI
Sienna
HT
Hot
MR
Merlot
MN
Midnight
WH
White
Satin finishes*
SS
Stainless Steel
*Coordinating wallplates only available separately. For wallplate information, see pg. 169.
Stainless Steel wallplate includes black plastic trim/adapter, visible from side. Match with separate
Black (BL) or Midnight (MN) controls.
| 1.800.523.9466 | www.lutron.com/specificationguide
Volume 1 P/N 367-1746 REV B
138
Sensors | Maestro wallbox occupancy/vacancy sensors
®
Incandescent/halogen**
Sensors with dimmer
Adjustable timeout—
1, 3, 5, 15, or 30 minutes
•
Occupancy/vacancy
version can be easily
programmed to work as
vacancy (manual-on) sensor
•
Optional off warning dims
the lights by 50%, 30
seconds before the lights
turn off
•
High-low sensitivity
adjustment
•
Standard Maestro dimmer
features: locked preset,
fade-to-on and fade-to-off
•
eco-dim® model
guarantees at least 15%
energy savings and triples
lamp life compared to a
standard switch†
•
Occupancy/vacancy sensor with
digital fade dimmer
Multi-location/single-poleMS-OP600M-XX1
120 V 600 W
Occupancy/vacancy sensor with
eco-dim dimmer†
Multi-location/single-poleMS-OP600GHW-XX 2
120 V 600 W
Vacancy sensor with
digital fade dimmer (CA Title 24 compliant)
Multi-location/single-poleMS-VP600M-XX1
120 V 600 W
Vacancy sensor with
eco-dim dimmer† (CA Title 24 compliant)
Multi-location/single-poleMS-VP600GHW-XX 2
120 V 600 W
Works with up to nine
companion dimmers;
see pg. 55
•
XX1:Gloss and Satin Colors® codes, see pg. 138
XX 2:Available in Gloss White (WH), Ivory (IV),
Almond (AL), Light Almond (LA), see pg. 138
(Wallplates not included.
Order separately, see pg. 169)
139
Volume 1 P/N 367-1746 REV B
All models must be derated if ganged unless
otherwise noted, see pg. 179.
**Minimum load is 40 W/VA.
†Maximum light output of 85% guarantees
15% energy savings over standard switches.
www.lutron.com/specificationguide | 1.800.523.9466 |
Sensors | Maestro wallbox occupancy/vacancy sensors
®
Sensors with switch
Switches
Occupancy/vacancy sensor with switch
Single-poleMS-OPS2-XX1
120 V 2 A lighting
Multi-location/3-way/MS-OPS5M-XX1
single-pole
120 V 5 A lighting
1/10 HP @ 120 V 3 A fan
Adjustable timeout—
1, 5, 15, or 30 minutes
•
Occupancy/vacancy
version can be easily
programmed to work as
vacancy (manual-on) sensor
•
High-low sensitivity
adjustment
Occupancy/vacancy sensor with
dual voltage switch
Multi-location/3-way/MS-OPS6M2-DV-XX1
single-pole
120 V or 277 V 6 A lighting
1/10 HP @ 120 V 3 A fan
Multi-location/3-way/MS-OPS6M2N-DV-XX1*
single-pole
120 V or 277 V 6 A lighting
1/10 HP @ 120 V 3 A fan
•
6 A (120/277 V) switch
controls incandescent,
halogen, MLV, ELV,
non-dim fluorescent,
non-dim LED, and general
purpose fans
•
2 A and 5 A switches control
incandescent, halogen,
MLV, ELV, non-dim LED and
non-dim fluorescent; 5 A
version also controls general
purpose fans
•
Vacancy sensor with switch
(CA Title 24 compliant)
Single-poleMS-VPS2-XX1
120 V 2 A lighting
Multi-location/3-way/MS-VPS5M-XX1
single-pole
120 V 5 A lighting
1/10 HP @ 120 V 3 A fan
Works with up to nine
companion switches;
see pg. 58
•
Works with a mechanical
3-way switch
•
Vacancy sensor with dual voltage switch
(CA Title 24 compliant)
Multi-location/3-way/MS-VPS6M2-DV-XX1
single-pole
120 V or 277 V 6 A lighting
1/10 HP @ 120 V 3 A fan
Multi-location/3-way/MS-VPS6M2N-DV-XX1*
single-pole
120 V or 277 V 6 A lighting
1/10 HP @ 120 V 3 A fan
XX1:Gloss and Satin Colors® codes, see pg. 138
(Wallplates not included, order
separately, see pg. 169)
All of the above do not need to be derated
if ganged.
For more information on occupancy/vacancy
sensors, visit www.lutron.com/occsensors.
*Requires neutral wire connection.
| 1.800.523.9466 | www.lutron.com/specificationguide
Volume 1 P/N 367-1746 REV B
140
Sensors | Maestro wallbox occupancy/vacancy sensors
®
Connections overview
Load connections*
Incandescent/
Halogen
Switched
Lighting/Fans
Incandescent/
Halogen Dimmer
with Sensor
Switch
with Sensor
Control types (for up to 2 locations)
Switch from 2 locations
Light
Source
Switch or dim from multiple locations (up to 10)
Switch
Mechanical
with Sensor Switch
Light
Source
Download complete Connection Diagrams
141
Volume 1 P/N 367-1746 REV B
Dimmer
Up to 9 Companion
or Switch
Dimmers or Switches
with Sensor
*For illustration purposes only.
Consult model number pages for specific
voltage and capacity information.
www.lutron.com/specificationguide | 1.800.523.9466 |
Sensors | Maestro wallbox occupancy/vacancy sensors
®
Accessories
Wallplates
4.75 in (121 mm)
Shown actual size:
2-gang Claro® wallplate
in White (WH).
For more information
about Designer wallplates,
see pg. 169.
4.69 in (119 mm)
.30 in
(7.6 mm)
profile
Coordinated electrical devices
For more information
about coordinated
Designer electrical
devices, see pg. 172.
Tamper resistant
GFCI receptacle
Customizable
6-port frame
Cable jack
| 1.800.523.9466 | www.lutron.com/specificationguide
Volume 1 P/N 367-1746 REV B
142
Sensors | Radio Powr Savr wireless occupancy/vacancy sensors
TM
3.57 in (91 mm)
Product family features
Simple installation with no wiring
•
Requires compatible receiving device
(sold separately)
•
Communicates via Lutron reliable Clear
Connect® Radio Frequency (RF) technology
to Lutron wireless devices including: Maestro
Wireless® (pg. 73), PowPak® modules (pg.
131), PowPak plug-in modules (pg. 125), and
PowPak stairwell fixtures (pg. 133)
•
Exclusive Lutron XCTTM Technology for fine
motion detection, 360º coverage
•
Comes with masking to restrict degrees of
coverage
•
1.30 in
(33 mm)
profile
Also compatible with Lutron systems and
international devices found in Specification
Guide Volumes 2 and 3
•
Operates at 434 mHz
•
Shown actual size: Radio Powr Savr wireless
ceiling-mount occupancy/vacancy sensor in White
(LRF2-OCR2B-WH)
Occupancy/vacancy has auto-on/auto-off,
manual on/auto-off, or auto-on low light/
auto-off control
•
Vacancy model has manual on/auto-off
control to meet California Title 24 section 119 (j)
requirements
•
Installation
Timeout options include 1, 5, 15, and
30 minutes
•
Multiple sensors can be added for extended
coverage—refer to receiving device product
specification submittals to determine system
limits
•
Can be recess mounted
(recess mounting bracket sold separately)
For indoor use only; temperature: 32° F­­–104° F
(0° C–40° C)
•
Battery included; 10-year battery life design
•
Available in White (WH)
•
Recommended for 8–12 ft (2.4–3.7 m) ceilings
•
Mount within 60 ft (18 m) line-of-sight
or 30 ft (9.1 m) through walls of the
receiving devices
•
Can be recess or surface mounted to solid
or drop ceilings (recess mounting bracket
sold separately)
•
Download specification submittal
Download high resolution product image
143
Volume 1 P/N 367-1746 REV B
www.lutron.com/specificationguide | 1.800.523.9466 |
Sensors | Radio Powr Savr wireless occupancy/vacancy sensors
TM
Occupancy/vacancy sensor
Vacancy sensor
Auto-on/auto-off,
manual on/auto-off or
auto-on low light/auto-off
Manual on/auto-off only
•
•
California Title 24
compliant
•
360° field-of-view
•
Ceiling-mount sensor
360° field-of-view
•
Occupancy/vacancy sensor LRF2-OCR2B-P-WH
Ceiling-mount sensor
Vacancy sensor LRF2-VCR2B-P-WH
Accessories
Accessory kit Recess-mounting bracket L-CMDPIRKIT
L-CRMK-WH
Wireless ceiling-mount sensor coverage range
Ceiling height
Maximum room dimensions
for complete floor coverage
Square feet
8 ft (2.4 m)
18 x 18 ft (5.5 x 5.5 m)
324 ft2 (30.2 m2)
9 ft (2.7 m)
20 x 20 ft (6.1 x 6.1 m)
400 ft2 (37.2 m2)
10 ft (3.0 m)
22 x 22 ft (6.7 x 6.7 m)
484 ft2 (44.9 m2)
12 ft (3.7 m)
26 x 26 ft (7.9 x 7.9 m)
676 ft2 (62.4 m2)
| 1.800.523.9466 | www.lutron.com/specificationguide
Volume 1 P/N 367-1746 REV B
144