Summary Welcome to ICEM’2012 in Marseille, France ...................................................... 3 Message from the Technical Program Co‐Chairs ................................................. 5 ICEM'2012 Committees ....................................................................................... 7 ICEM Steering Committee ............................................................................ 7 ICEM'2012 Organizing Committee ............................................................... 7 ICEM'2012 National Scientific Committee ................................................... 7 ICEM'2012 Technical Tracks ......................................................................... 8 General information ............................................................................................ 9 Program at a glance ........................................................................................... 13 Conference room distribution ........................................................................... 14 Sunday 2nd of September ...................................................................................15 Tutorials .....................................................................................................15 TU 1: Fault Diagnosis, Prognosis and Reliability of Electrical Drives .........15 TU 2: Life‐Cycle Cost Optimization in Variable‐Speed‐Driven Pump and Fan Systems...............................................................................................15 TU 3: Improving Motor Efficiency and Motor Miniaturization ‐ The Role of Thermal Simulation ...................................................................................15 TU 4: Design and Testing of Insulation for Adjustable Speed Drives ........15 TU 5 ‐ Tutorial: Superconducting Machines ‐ History and Latest Developments of Superconducting Machines ..........................................15 Poster session 1 ........................................................................................15 Monday 3rd of September ..................................................................................23 Poster session 2 ........................................................................................23 TPC5‐1 ‐ Monitoring and diagnosis ...........................................................30 TPC5‐2 ‐ Measurements and testing .........................................................30 TPC1‐1 ‐ Losses, thermal and efficiency analysis ......................................31 TPC3‐1 ‐ Electrical drives 1 ........................................................................32 SS7 ‐ Electrical machines for aerospace applications ...............................32 TPC7‐1 ‐ Grid‐connected and renewable energy applications 1 ..............33 TPC4‐1 ‐ Manufacturing and technological problems ..............................33 TPC6‐1 ‐ Embedded applications 1 ...........................................................34 SS10 ‐ Hybrid excitation synchronous machines ......................................34 SS12 ‐ Education in electro‐mobility .........................................................35 Tuesday 4th of September ..................................................................................36 Poster session 3 ........................................................................................36 TPC4‐2 ‐ Thermal problems ......................................................................43 1
TPC1‐2 ‐ Fractional slot machines .............................................................43 TPC4‐3 ‐ Magnetic materials .....................................................................44 TPC1‐3 ‐ IPM Machines .............................................................................45 TPC3‐2 ‐ Electrical drives 2 ........................................................................45 SS8‐1 ‐ Design of electrical machines for the automotive sector 1 ..........46 SS8‐2 ‐ Design of electrical machines for the automotive sector 2 ..........46 TPC5‐3 ‐ Noise, vibration and high frequency effects...............................47 TPC7‐2 ‐ Grid‐connected and renewable energy applications 2 ..............47 SS9‐1 ‐ Analytical models of electric machines and actuators 1 ...............48 SS9‐2 ‐ Analytical models of electric machines and actuators 2 ...............48 TPC2‐1 ‐ Machines for special applications ..............................................49 TPC6‐2 ‐ Embedded applications 2 ...........................................................49 SS11 ‐ Noise and vibrations in electrical machines ...................................50 SS4 ‐ Condition monitoring for hybrid and electrical vehicles ..................50 SS2 ‐ Energy conservation in transformers and related practices ............51 TPC2‐2 ‐ Magnetic gears and linear machines ..........................................52 SS5 ‐ Modeling and control of high speed motors ....................................52 SS1 ‐ Recent advancements in sensorless control of electrical machines 53 SS6 ‐ Application and optimization of modern signal processing tools in electrical machines ...................................................................................53 Exhibitors .......................................................................................................... 55 2
Welcome to ICEM'2012 in Marseille, France
On behalf of the ICEM’2012 Organizing Committee, I would like to welcome you all in
th
Marseille, the largest city of the South of France for the XX edition of the International
Conference on Electrical Machines (ICEM). It is really a great honour and a pleasure as
well to have the privilege to host this conference in the city where I was born and where I
studied up to the end of the high school. Marseille as well as Corsica has a very special
place in my heart and I did put pressure on the ICEM’2012 Organizing Committee
members to make ICEM’2012 as successful as all the previous editions.
The ICEM has established itself as an influential and recognized international event,
being the only major international conference entirely devoted to electrical machines.
Started in London in 1974, ICEM is now established as a regular biennial event. Very
successful recent editions were held in Helsinki (Finland) in 2000, Bruges (Belgium) in
2002, Cracow (Poland) in 2004, Chania (Greece) in 2006, Vilamoura (Portugal) in 2008
and Roma (Italy) in 2010. Even if ICEM is an independent non-profit organization, it has
started link with the Institute of Electrical & Electronics Engineers, Inc. (IEEE) with a
technical co-sponsorship of societies starting in 2006. This has been the consequence
of a real jump in quality and now ICEM papers are published in one of the most
important scientific data bases in the world, the so-called IEEEXplore. Moreover, ICEM
papers are now more referenced than in the past due to what IEEE is providing in term
of international visibility. For the 2012 edition, ICEM has received the technical cosponsorship of IEEE Industry Applications Society, Industrial Electronics Society, Power
& Energy Society and also of the Institution of Engineering and Technology.
This is the second time ICEM is coming in France after the 1994 edition in Paris. The
choice of Marseille has been based on the fact that it is situated in the second French
area in term of innovation and number of researchers in the field of sciences and
technology. Even if needed, the technical visit will confirm this fact. With its 26 centuries
of history, Marseille is a city full of art and culture which has many wonders to share with
you. Moreover, the city combines tradition and modernity. Marseille is deeply marked by
its past and is constantly digging up the remains of all the cities that have been built on
top of each other over the centuries. It takes the visitor on a journey that begins with its
Greek and Roman origins and leads us past the medieval religious foundations, the 16th
Century fortifications, the rich homes of the 17th and 18th Centuries and the many
prestigious buildings erected in the 19th Century and right up to modern times and the
great architectural achievements of the 21st Century. In 2013, Marseille will be the
European Capital of Culture (MP2013).
The ICEM’2012 Organizing Committee wishes you a very successful conference in
which you will certainly attend interesting technical sessions, you will meet new friends
and colleagues for further collaborations and you will return back home with new ideas
from this exciting technical field of electrical machines.
Enjoy Marseille, enjoy ICEM’2012 and do make it a memorable event!
Gérard-André Capolino
ICEM’2012 General Chair
3
4
Message from the Technical Program Co-Chairs
The XXth edition of ICEM is a major event of the worldwide engineering community
working in the field of electrical machines and their applications. It was therefore a great
honour and a pleasure for us to be responsible for the technical program of ICEM’2012.
This is the fourth time after Chania in 2006, Vilamoura in 2008 and Roma in 2010, that
ICEM proposes its new shape to participants and to authors with the technical cosponsorship of IEEE. For this purpose, it has been asked to submit a full provisional
version of each paper for both regular tracks and special sessions.
For the 2012 edition, the Organizing Committee has proposed to participants:
5 tutorials
7 tracks for regular papers
11 special sessions on “hot” topics
A student forum
A technical exhibition with 10 booths
An exciting technical visit of the ITER project
Altogether, 672 papers have been submitted and 469 will be in the final program
involving around 1,800 authors from 44 countries in the world. The mean number of
reviews per paper has been 2.93 involving close to 1,600 reviewers. In the technical
program, the papers have been splitted in 3 poster sessions of around 100 papers each
and 30 oral sessions of 6 papers each.
The Technical Program represents the integrated effort of many individuals, namely,
authors, reviewers, track co-chairs, special session organizers, and the National
Scientific Committee members, whom we thank for their contributions to the success of
ICEM’2012.
It is our strong opinion that the world's state of the art in electrical machines is well
represented across both technical tracks and special sessions. However, if few words
have to be chosen, then "embedded, grid-connected, design, control and condition
monitoring" are our choices of keywords that summarize the large majority of
presentations. We look forward to the intellectual stimulation of all participants, and
thank you again for attending ICEM’2012.
Bienvenue à Marseille!
Carole Henaux, Aldo Boglietti, Bertrand Nogarede
ICEM’2012 Technical Program Co-Chairs
5
6
ICEM'2012 Committees
ICEM Steering Committee
Gérard-André Capolino (France), Chair
Carlos Lemos Antunes (Portugal), Secretary
Andreas Binder (Germany)
Manuel Pérez Donsión (Spain)
Hulusi Bülent Ertan (Turkey)
Tom Jahns (USA)
Basile Kawkabani (Switzerland)
Antonios Kladas (Greece)
Jorma Luomi (Finland)
Jan Melkebeek (Belgium), Awards Chair
Bertrand Nogarede (France)
Francesco Parasiliti (Italy)
Mircea Radulescu (Romania)
Chandur Sadarangani (Sweden)
Peter Tavner (UK)
Slawomir Wiak (Poland)
Corresponding Members
Jamel Bel Hadj (Tunisia)
Rachid Ibtiouen (Algeria)
Maarten Kamper (South Africa)
Sang-Bin Lee (Korea)
Hiroyuki Ohsaki (Japan)
Pragasen Pillay (Canada)
Ma Weiming (China)
Driss Yousfi (Morocco)
Jianguo Zhu (Australia)
ICEM'2012 Organizing Committee
General Chair: Gérard-André Capolino
Technical Program Co-Chairs: Carole Henaux, Aldo Boglietti, Bertrand Nogarede
Special Session Co-Chairs: Franck Betin, Mohamed Boussak
Tutorial Co-Chairs: Annette Muetze, Sandy Smith, Jean-François Llibre
Exhibition Chair: Richard Grisel
Awards Chair: Jan Melkebeek
Student Forum Co-Chairs: Shahin Hedayati Kia, Babak Nahidmobarakeh
Finance Chair: Humberto Henao
Publication Chair: Laurent Capocchi
Publicity Co-Chairs: Francesco Parasiliti, Basile Kawkabani, Amine Yazidi
Web and Information Co-Chairs: Cyril Drocourt, Antonio Luque
ICEM'2012 National Scientific Committee
Chair: Bertrand Nogarede
Members: Stephan Astier, Seddik Bacha, Georges Barakat, Hamid Ben Ahmed,
Mohamed Fouad Benkhoris, Jean-François Brudny, Jean-Frédéric Charpentier, Maurizio
7
Cirrincione, Guy Clerc, Philippe Enrici, Guy Friedrich, Mohamed Gabsi, Daniel Guyomar,
Patrick Lagonotte, Yvan Lefevre, Vincent Mazauric, Farid Meibody-Tabar, Nacer M'Sirdi,
Rachid Outbib, Marie-Cécile Péra, Daniel Roger, Mounaim Tounzi, Christophe Turpin,
Jean-Claude Vannier, Paul-Etienne Vidal
ICEM'2012 Technical Tracks
TPC-1 Classical rotating field machines (Co-Chairs: Frédéric Gillon, Gianmario
Pellegrino, Dave Dorrell)
TPC-2 Innovative machines and actuators (Co-Chairs: Jean-François Rouchon, Akira
Chiba, Yve Perriard)
TPC-3 Electrical drives (Co-Chairs: Bruno Robert, Radu Bojoi, Peter Omand
Rasmussen)
TPC-4 Design and related problems (Co-Chairs: Noureddine Takorabet, Andrea
Cavagnino, Ayman El-Refaie)
TPC-5 Condition monitoring, diagnosis (Co-Chairs: Raphael Romary, Fabio Giulii
Capponi, Mario Pacas)
TPC-6 Embedded applications (Co-chairs: Christophe Forgez, Chris Gerada, Leila
Parsa)
TPC-7 Grid-connected or emergency applications (Co-chairs: Marc Petit, Marcello
Pucci, Josep Guerrero)
8
General information
Location
ICEM’2012 will be organized in the Palais des Congrès et des Expositions de
Marseille which occupies a 17 hectares in the heart of the city. Just a few minutes from
the Prado beaches and the Old Port, the Parc Chanot benefits from an exceptional
location in the centre of one of the largest metropolitan areas in Southern Europe. The
TGV station and Marseille Provence International Airport mean that access to the city is
comfortably easy.
The Palais des Congrès et des Expositions de Marseille is located at:
SAFIM – Parc Chanot
Rond Point du Prado – 13008 Marseille, France
www.parc-chanot.com
Access from Marseille Provence Airport
In front of terminals 3 and 4, take the bus shuttle to Marseille St Charles train station and
then the metro to station Rond-Point du Prado (direction Sainte-Marguerite Dromel):
around 45 minutes
Access from the Gare St Charles
From the Marseille St Charles train station, take the metro to the station Rond-Point du
Prado (direction Sainte-Marguerite Dromel): around 15 minutes
Access by car
For those coming by car, it is strongly advised to park the car in the surrounding areas
(parking are available) and to reach the Palais des Congrès et des Expositions de
Marseille by the metro. It is very difficult to circulate and to park a car in Marseille
downtown.
Official language
The official language of the conference is English for presentations, discussions and
conference activities. For the individuals having English as mother language, please do
make the effort to be clear enough to be understood by the others.
Attendees’ identification
All public buildings in France have limited access for security reason (Vigipirate). In this
way, all the ICEM’2012 attendees have to bring with them their ID Card or their passport
which has to be shown to any security officer upon request. These documents will be
also mandatory for the technical visit.
Tutorials
All the five tutorials will be organized on September 2, 2012. The access to tutorials is
free for any attendee registered to ICEM’2012 (student or regular). Any tutorial attendee
has to bring his/her own laptop in order to download the tutorial material. No printed
documents will be provided.
Weather
The month of September is just the end of the summer and temperature can be still hot
during the day (25°C-30°C) and a bit cooler in the evening (17°C-20°C). Please do
check to the Marseille forecast before travelling to avoid unexpected inconvenience.
9
Daily conference breaks
Coffee breaks will be served in the morning and in the afternoon on September 2-4 in
the Palais des Congrès et des Expositions (see conference program) close to the poster
sessions and the exhibition (first floor).
Welcome reception
A welcome reception will be organized on Sunday September 2, 2012 in the Palais des
Congrès et des Expositions close to the poster sessions and the exhibition (first floor).
Please don’t miss this informal event you will surely meet new friends and colleagues!
Gala dinner
The gala dinner will be organized on Tuesday September 3, 2012 in the in the Palais
des Congrès et des Expositions (floor 0). The award ceremony and the presentation of
the 2014 edition of ICEM will be held during the gala dinner. Dressing could be casual.
Lunches
Light lunches (French sandwiches) will be provided on September 2-4, 2012 at the first
floor of the Palais des Congrès et des Expositions close to the Poster Sessions.
Attendees are expected to visit the booths of the poster sessions during the lunch time.
Technical visit
A technical visit of the world project ITER has been organized on September 5, 2012. It
is the first time that such a large number of visitors will be accepted inside the ITER site.
ICEM’2012 participants will not be allowed to register at the last moment since they have
to be identified on site with a list provided long time in advance. The visit program will
start at 8:00am in front of Stade Velodrome (close to the conference centre) and it is
expected to be completed at 7:00pm by returning by buses at the same place. A stop at
the Marseille Provence airport on the way back will be possible upon request.
Paper presentation
In ICEM’2012 Proceedings, there will be no difference in between oral and poster
presentations. All papers will be treated in the same way and will be available in the
IEEEXplore after the conference only if presented.
Oral
All the authors presenting a paper in oral are kindly requested to meet their co-chairs in
the session room 15 minutes before the session schedule in order to download their
presentation in the computer available in the room. They have to provide the co-chairs
with a single PDF file of their presentation bring on a USB key. It is not possible to
change of computer in between presentations. The length of the presentation is
restricted to 20 minutes including questions. The authors presenting a paper are strongly
advised to keep their oral presentation within 15 minutes (15 to 20 slides) and to let 5
minutes for questions. They have to verify that their bio has been printed in their final
version otherwise they have to bring a short printed bio of 10 lines maximum to the
session co-chairs.
Poster
A poster preparation is a difficult but rather interesting exercise. It is not allowed to
simply pin up a simple copy of the published paper. The provided template has a A0
European size (119cm height, 84cm width). Please do remain strictly in these
10
dimensions. Each poster will be hanged by the presenters using material provided by
conference organizers.
A poster display will catch the eye of the viewer (large figures), present a logical
sequence of material in an attractive visual way and does not require the reader to
examine a detailed text. During the schedule breaks (coffee and lunches), authors have
to remain at near their poster in order to engage a direct discussion with the conference
delegates.
Session chairs
All the session chairs (regular and special sessions) are kindly requested to bring their
own laptop with them. The only requirement is to have a laptop with the Adobe Acrobat
Reader® 10.0 or higher with European embedded fonts and a plug to connect the video
projector. They will have the responsibility of downloading the author presentations at
least 15 minutes before the beginning of the session. The authors have to provide them
with a USB Key with their PDF presentation inside and a short bio (max. 10 lines) in
order to be introduced. For poster sessions, the session co-chairs will have to identify
the no-shows and to evaluate poster presentation and attendance being in the place.
The session chairs have the responsibility to make the schedule strictly respected. Each
presentation plus questions have to be presented within a period of 20 minutes. In case
of “no show”, session co-chairs have to wait 20 minutes for the next paper or to close
the session if it is the last paper. Each session chair has to fill a form (one by session
oral/poster) for session evaluation and to bring it back to the registration desk.
All the rooms will be equipped with a video projector and a screen. The session chairs
will be assisted by one conference organization member in each room from the
beginning of the session up to the end. If needed, a laptop will be provided by the
conference organizers.
Internet access
No free internet wireless access will be provided to ICEM’2012 participants. Please do
bring with you a laptop with Wi-Fi facilities. Any participant can purchase a short period
access USB key 3G Internet (by using the French cellular phone network) available in
any Phone shop.
11
12
Program at a glance
13
Conference room distribution
14
Sunday 2nd of September
Tutorials
TU 1: Fault Diagnosis, Prognosis and Reliability of Electrical Drives
Room: Morgiou - Hour: 10:00-12:00
Lecturer: Elias Strangas, USA
TU 2: Life-Cycle Cost Optimization in Variable-Speed-Driven Pump
and Fan Systems
Room: Sormiou - Hour: 10:00-12:00
Lecturers: Jero Ahola, Tero Ahonen, Finland
TU 3: Improving Motor Efficiency and Motor Miniaturization - The
Role of Thermal Simulation
Room: Morgiou - Hour: 13:30-18:00
Lecturer: Dave Staton, UK
TU 4: Design and Testing of Insulation for Adjustable Speed Drives
Room: Sormiou - Hour: 13:30-18:00
Lecturer: Alfredo Contin, Italy
TU 5 - Tutorial: Superconducting Machines - History and Latest
Developments of Superconducting Machines
Room: Riou - Hour: 13:30-18:00
Lecturers: Bogi Bech Jensen, Philippe J. Masson, Denmark/USA
Poster session 1
Room: Poster & Exhibition (first floor) - Hour: 10:00-18:00
Co-chairs: Metin Aydin, Franck Betin, Augusto Di Napoli
FF-001074: A Brushless Doubly Fed Induction Machine with Flat Plane Rotary
Transformers
Mauricio Ruviaro, Fredemar Runcos, Brazil
FF-003816: Analysis of efficiency characteristics of squirrel-cage induction
motor for pump application
Leszek Szychta, Radoslaw Figura, Poland
FF-004286: Use of Infrared thermography for computation of heating curves
and preliminary failure detection in induction motors
15
Maria Jose Picazo-Rodenas, Rafael Royo, Jose Antonino-Daviu, Jose RogerFolch, Spain
FF-005533: Optimal Design of power traction Induction Motor using Response
Surface Method
Kwangdeok Kim, Yun-Ho Jeong, Yong Jae Kim, Kyung-Won Jeon, Sang-Yong
Jung, South Korea
FF-005991: Optimization of a Three Phase Induction Motor with Outer Rotor for
Multi-speed Applications
Bogdan Virlan, Alecsandru Simion, Leonard Livadaru, Seifeddine Ben Elghali,
Rachid Outbib, Romania/France
FF-008451: Realization of a "3 & 6 Phase" Induction Machine
Pierre-Jac Venter, Adisa A. Jimoh, Josiah L. Munda, South Africa
FF-009423: Optimal Sizing of Static Converters for Single Phase Feeding of
Three Phase Induction Motor
Jose Daniel Lara, Ignacio Vieto, Costa Rica
FF-009911: Genetic Algorithm Based Design Optimization of a Three-Phase
Multiflux Induction Motor
S.S. Sivaraju, J.T.E. Ferreira Fernando, N. Devarajan, India/Portugal
FF-012017: Experience in China on the Die-Casting of Copper Rotors for
Induction Motors
Daniel Liang, Jiabin Yu, Xu Yang, Victor Zhou, USA/China
FF-002186: Characteristics Analysis of Matrix-Rotor Induction Motor Using
Parallel Computing System
Yoshihiro Kawase, Tandashi Yamaguchi, Ken Tanaka, Masaki Otsubo,
Naotaka Toida, Koichi Sato, Japan
FF-011347: Dynamic Induction Machine Model Accounting for Stator and Rotor
Slotting
Gojko Joksimovic, Jaksa Riger, Thomas Wolbank, Nedjeljko Peric, Mario
Vasak, Goran Stocic, Vinko Lesic, Montenegro/Austria/Croatia
FF-005932: The magnetic noise of the inverter-fed permanent split-capacitor
induction motor
Andrei Negoita, Abdoul N'Diaye, Abdesslem Djerdir, Romania/France
FF-000035: Loss Reduction of a Canned Switched Reluctance Machine
Qiang Yu, Christian Laudensack, Dieter Gerling, Germany
FF-002917: Basic Consideration of Switched Reluctance Motor with Auxiliary
Windings and Permanent Magnets
Yu Hasegawa, Kenji Nakamura, Osamu Ichinoku, Japan
FF-006092: Evaluation of torque-speed curve of switched reluctance motor with
segmental rotor
M'Hamed Belhadi, Ali Kolli, Guillaume Krebs, Claude Marchand, France
FF006939: Criteria for design of high performance switched reluctance motor
Vandana Rallabandi, Saurabh Nikam, B.G. Fernandes, India
FF-011029: Analysis of Different Winding Topologies for Canned Switched
Reluctance Machines
16
Christian Laudensack, Qiang Yu, Dieter Gerling, Germany
FF-11282: Winding Configurations for a Six Phase Switched Reluctance
Machine
James Widmer, Richard Martin, Christopher Spargo, Barrie Mecrow, Tuncay
Celik, United Kingdom
FF-005681: Electromagnetic Design Optimization of a Low Speed Slotted
Switched Reluctance Machine using Genetic Algorithm
Luc Moreau, France
FF-009245: Impact of Command Parameters on Efficiency, Torque Ripple and
Vibrations for Switched Reluctance Motor
Ali Kolli, Guillaume Krebs, Xavier Mininger, Claude Marchand, France
FF-002542: Design and FEM Analysis of Five-Phase Permanent Magnet
Generators for Gearless Small-Scale Wind Turbines
Ana-Maria Mihai, Seifeddine Benelghali, Alecsandru Simion, Rachid Outbib,
Leonard Livadaru, Romania/France
FF-003611: Determination of equivalent circuit parameters in a direct drive wind
power generator
Frank Brasas, Johannes Germishuizen, Germany
FF-005436: The Fundamental Design Technique of Switched Reluctance
Motors, and Comparison with PMSM
Tomoya Ishikawa, Hideo Dohmeki, Japan
FF-005177: Combined Stator Windings in Electric Machines with Same Coils
Henning Kasten, Wilfried Hofmann, Germany
FF-008834: Design and Implementation of a Variable Speed Wind Turbine
Emulator
Jonathan Nye, Eskom, Jacques de la Bat, Mohamed Khan, Paul Barendse,
South Africa
FF-005622: Characterization of Radial Magnetic Forces in Low-Speed
Permanent Magnet Wind Generator with Non-Overlapping Concentrated
Windings
Mostafa Valavi, Arne Nysveen, Robert Nilssen, Norway
FF-010146: Theoretical study and Experimental Validation of a Wind Energy
Conversion System Control with Three-Level NPC Converters
Tarak Ghennam, Algeria
FF-011576: A Doubly Fed Induction Generator for Wind Stand-Alone Power
Applications (Simulation and Experimental Validation)
Tedjani Mesbahi, Algeria
FF-007986: Variable Speed Wind Turbine Generator-Three Level VSI Interface
Georgios Adamidis, Thomas Nathenas, Greece
FF-001546: New Controller Design for PMSG Based Wind Generator with LCLFilter Considered
Marwan Rosyadi, S. M. Muyeen, Rion Takahashi, Junji Tamura, Japan/United
Arab Emirates
17
FF-003689: Small Signal Stability Analysis of Fixed Speed Wind Generator
including SDBR
Mohammad Hasanuzzaman Shawon, Ahmed Al Durra, S.M. Muyeen, United
Arab Emirates
FF-001791: Design Preliminaries for Direct Drive under Water Wind Turbine
Generator
Krisztina Leban, Ewen Ritchie, Alin Argeseanu, Denmark/Romania
FF-006009: FEM Analysis upon Significance of Different Permanent Magnet
Types Used in a Five-Phase PM Generator for Gearless Small-Scale Wind
Ana-Maria Mihai, Seifeddine Ben Elghali, Leonard Livadaru, Alecsandru
Simion, Rachid Outbib, Romania/France
FF-006351: Flux Density Analysis of Using Halbach Array in MW Level
Permanent Magnet Synchronous Generators for Wind Turbines: A Preliminary
Linear Model
Salem M Alshibani, Rukmi Dutta, Vassilios G Agelidis, Australia
FF-001422: Magnetic Field and Stress Analysis of Interior Permanent Magnet
Motor with Off-Centered Rotor Using 3-D Finite Element Method
Yoshihiro Kawase, Tadashi Yamaguchi, Yuki Ono, Wataru Koyanagi, Masanori
Nakamura, Japan
FF-006947: Inductances Estimation in the d-q Axis for an Interior PermanentMagnet Synchronous Machines with Distributed Windings
Abdessamed Soualmi, Frédéric Dubas, Andry Randria, Christophe Espanet,
France
FF-007846: Impact of bonded magnets adoption on fractional machines
efficiency
Luca Ferraris, Fausto Franchini, Emir Poković, Alberto Tenconi, Italy
FF-008605: Influence of Rotor Magnet Variations in Concentrated Winding
IPMSM
Shah Rahman, Babak Vaseghi, Andrew Knight, Canada
FF-008257: Eddy Current Loss Calculation in Rotor Back Iron for Concentrated
Winding PM Generator
M. Firmansyah, A. Jassal, H. Polinder, D. Lahaye, Netherlands
FF-011096: Design of Stator Core Shape of ‘Magnetic Anisotropic Motor’
Keisuke Fujisaki, Kohei Fujitani, Japan
FF-001333: Comparison of Different Designs of Synchronous Reluctance
Machines with High-Anisotropy Rotors
Erich Schmidt, Austria
FF-007862: Effect of Magnets on Average Torque and Power Factor of
Synchronous Reluctance Motors
Dany Prieto, Benjamin Dagusé, Philippe Dessante, Pierre Vidal, Jean-Claude
Vannier, France
FF-000477: Iterative Procedure for Determination of Synchronous Generator
Load Point Using Finite Element Method
Miroslav Petrinic, Stjepan Car, Ante Elez, Croatia
18
FF-010847: Modification of Synchronous Generator Cooling System Control
Igor Erceg, Damir Sumina, Mario Vrazić, Croatia
FF-005312: An Improved Model of Synchronous Generator Based on Finite
Element Method Analysis
Branko Tomičić, Stjepan Car, Eljko Tih, Croatia
FF-005487: Synchronous Turbo-Generator Model Accounting for Rotor Whirl
Gojko Joksimovic, Montenegro
FF-009571: A Novel and Fundamental Approach towards Field and Damper
Circuit Parameter Determination of Synchronous Machine
Kaushik Mukherjee, Lakshmi Varaha Iyer, Xiaomin Lu, Narayan Kar, Canada
FF-006378: An Investigation of the Use of Halbach Array in MW Level
Permanent Magnet Synchronous Generators
Salem M Alshibani, Rukmi Dutta, Vassilios G Agelidis, Australia
FF-008869: Influence of the Air Gap Length on the Magnetic Core Loss in
Large Hydro Generator
Ana Aguiar, Arezki Merkhouf, Kamal Al-Haddad, Canada
FF-001651: Prediction of Field Currents in Flux-Modulating Synchronous
Machines under Loaded Conditions
Tadashi Fukami, Kazuo Shima, Toshihiro Tsuda, Mitsuhiro Kawamura, Japan
FF-001104: Effect of Pole and Slot Number Changes on the Performance of a
Surface PM Machine
Chun Tang, Wen L. Soong, Gene S. Liew, Nesimi Ertugrul, Australia
FF-001716: Performance Investigation and Comparison of Line Start-up
Permanent Magnet Synchronous Motor with Super Premium Efficiency
Xueqing Feng, Yaxing Bao, Lijun Liu, USA/China
FF-002178: Permanent Magnet Motors to Change Poles and Machine
Constants
Kazuto Sakai, Hisanori Hashimoto, Japan
FF-003808: d-q Space Vector Analysis for Line-Starting Permanent Magnet
Synchronous Motors
Akeshi Takahashi, Satoshi Kikuchi, Hiroyuki Mikami, Kazumasa Ide, Andreas
Binder, Japan/Germany
FF-003913: An Improved Physical Phase Variable Model for Permanent
Magnet Machines
Martin Mohr, Oszkár Bíró, Andrej Stermecki, Franz Diwoky, Austria
FF-006394: Single-Phase Line-Start Permanent-Magnet Motors with Start-Up
and Synchronization Capabilities under Full-Load Torque
Kazumi Kurihara, Tomotsugu Kubota, Daisuke Nitawaki, Fumiya Nii, Japan
FF-006424: A Method for Optimizing the Design of SPM Type Magnetic Gear
Based on Reluctance Network Analysis
Michinari Fukuoka, Kenji Nakamura, Osamu Ichinokura, Japan
FF-003328: Design, Analysis and Experimental Verification of a Permanent
Magnet AC Servomotor for Mobile Robot Applications
19
Oguzhan Ocak, Baris T. Ertugrul, Eyyup Sincar, Cuneyt Oysu, Metin Aydin,
Turkey
FF-005339: Inset-Consequent and Inset Rotors for Line Start Permanent
Magnet Synchronous Motor
Rajaram Ugale, Bhalachandra Chaudhari, Srinivas Baka, India
FF-008702: Evaluation of Calculation Methods and the Effect of End-Winding
Inductance on the Performance of Non-Overlap Winding PM Machines
Johannes Potgieter, Maarten Kamper, South Africa
FF-010782: Modeling and permanent-magnet shape optimization of an axialflux machine
Adrian Pop, Frederic Gillon, Mircea Radulescu, France/Romania
FF-008567: Analysis of non-uniform circumferential segmentation of magnets
to reduce Eddy-current losses in SPMSM machines
Patxi Madina, Javier Poza, Gaizka Ugalde, Gaizka Almandoz, Spain
FF-011142: Fast computation of ripple torque for PM synchronous traction
machines
Martin Cantegrel, France
FF-006157: Harmonic Wave Model of a Permanent Magnet Synchronous
Machine For Modeling Partial Demagnetization under Short Circuit Conditions
Christian Kral, Anton Haumer, Maxim Bogomolov, Elena Lomonova,
Austria/Netherlands
FF-006599: Design Considerations for an Outer Rotor, Field Wound, Flux
Switching Machine
Michael Galea, Chris Gerada, Tahar Hamiti, United Kingdom
FF-006629: Design and Applications of the Synchronized Motion Controller for
Tapping Processes
Chao-Fu Yeh, Wei-Sheng Huang, Chih-Han Kuo, Pau-Lo Hsu, Taiwan
FF-006785: Analytical Time-Harmonic Approach to Calculate Rotor EddyCurrent Losses due to Stator Harmonics
Xiaoli Cui, Johann Haldemann, Switzerland
FF-001503: Power Oscillations in Hydropower Units
Zlatko Maljković, Ivan Gaparac, Mario Vraić, Croatia
FF-001589: An Advanced Teaching Lab for the Setting up of an Islanded
Production Unit
André Hodder, Basile Kawkabani, Switzerland
FF-001805: A consideration on loss characteristics and annual capacity factor
of offshore wind farm
Naoya Inaba, Rion Takahashi, Junji Tamura, Mamoru Kimura, Akiyoshi
Komura, Kenji Takeda, Japan
FF-002674: On the Development of Flywheel Storage Systems for Power
System Applications: A Survey
Mohamed I. Daoud, Ayman S. Abdel-Khalik, Ahmed M. Massoud, Shehab
Ahmed, Nabil H. Abbasy, Qatar/Egypt
FF-002763: Properties of novel traction polyphase rectifier transformer
20
Andrzej Sikora, Barbara Kulesz, Poland
FF-004928: Study on High-Efficiency of the Reactor used for Boost Converter
Toru Nakanishi, Hideo Dohmeki, Japan
FF-005738: Load identification from Power Recordings at Meter Panel in
Residential Households
Kaustav Basu, Vincent Debusschere, Seddik Bacha, France
FF-008826: Review and Application of Micromachines for Wind Energy
Integration
Ramzi Solomon, Mohamed Khan, Paul Barendse, Pragasen Pillay, Komla
Folly, Canada/South Africa
FF-009466: Advanced Modeling and Control of a Wave Energy Conversion
System
Jerome Leclerc, Philippe Dumee, Nikolaos Kimoulakis, Antonios Kladas,
France/Greece
FF-003883: Comparison of Permanent Magnet Generators for a Very Low
Speed Renewable Energy Application
David G. Dorrell, Sze S. Ngu, Calum Cossar, Australia/United Kingdom
FF-001627: Super-Multipolar Permanent Magnet Reluctance Generator
Designed for Small-Scale Renewable Energy Generation
Kenji Nakamura, Osamu Ichinokura, Japan
FF-006742: Contribution of LCA approach to the choice of rotating electrical
machines for environmental impact minimization
Walid Boughanmi, Jean Paul Manata, Daniel Roger, France
FF-004057: Study and Analysis of an Electromagnetic Energy Recovery
Damper (EERD) for Automotive Applications
Mustapha Zaouia, Nacereddine Benamrouche, Abdesslem Djerdir,
Algeria/France
FF-004596: Design and Optimization of a Permanent Magnet Axial Flux Wheel
Motors for Electric Vehicle Application
Noureddine Takorabet, Jean-Philippe Martin, Farid Meibody-Tabar, Fadi Sharif,
Pascal Fontaine, France
FF-007889: A Rotary-Linear Switched Reluctance Motor for Automotive
Applications
Lorand Szabo, Ioana Bentia, Mircea Ruba, Romania
FF-007145: Design Optimization of 8/14 Switched Reluctance Machine for
Electric Vehicle
Mirsad Cosovic, Senad Smaka, Iris Salihbegovic, Semsudin Masic, Bosnia and
Herzegovina
FF-010375: Outer Rotor Switched Reluctance Motor Design for In-wheel Drive
of Electric Bus Applications
Anas Labak, Narayan C. Kar, Canada
FF-003093: Magnetic Field-Electric Circuit Coupled Method for brush DC motor
simulations
21
Raphael Andreux, Julien Fontchastagner, Noureddine Takorabet, Nicolas
Labbe, Jean-Sebastien Metral, France
FF-005835: Optimal design procedure for an external rotor permanent-magnet
machine
Juan Tapia, Asko Parviainen, Juha Pyrhönen, Pia Lindh, Rogel Wallace,
Chile/Finland
FF-006262: Design study of magnet shapes for axial Halbach arrays using 3D
Finite Element Analyses
Oliver Winter, Christian Kral, Erich Schmidt, Austria
FF-000116: Numerical Simulations of Rotor Dynamic Eccentricity Effects on
Synchronous Machine Vibrations for Full Run Up
Pierre Pellerey, Vincent Lanfranchi, Guy Friedrich, France
FF-000701: Unipolar flux in bearingless two-pole machine
Anssi Sinervo, Tommi Jokela, Antero Arkkio, Finland
FF-001031: Development of a full parameterized FE-modeling tool for efficient
vibration investigations on end windings of Turbo- and Hydro- Generators
Bernd Schlegl, Christian Scheinecker, Andreas Marn, Fritz Neumayer, Mario
Himmelreich, Franz Heitmeir, Austria
FF-002895: Identifying cogging torque harmonics affected by misalignment in
axial flux fractional pitch PMSM
Mark Thiele, Greg Heins, Australia
FF-003271: Cogging Torque Estimation for Sensorless PMSM
Ben Saunders, Greg Heins, Mark Thiele, Friso de Boer, Australia
FF-008133: Magnetic Forces and Vibrational Behavior Analysis for Flux
Switching Permanent Magnet Machines
Julien Boisson, Francois Louf, Javier Ojeda, Xavier Mininger, Mohamed Gabsi,
France
FF-010693: Estimation of relative Magnetostriction and Maxwell’s forces in
stacked Grain Oriented steel structures
Rémi Penin, Jean Philippe Lecointe, Guillaume Parent, Jean-François Brudny,
Thierry Belgrand, France
FF-004413: Reducing the Cogging Torque of PM Transverse Flux Machines by
Discrete Skewing of a Segmented Stator
Florian Dreher, Nejila Parspour, Germany
FF-009504: Research on Vibration Analysis and Noise-Reduction Technique of
PM Motor
Eri Zeze, Kan Akatsu, Japan
FF-005363: Torque Ripple Reduction in Five-Phase Induction Machines Using
Mixed Winding Configurations
Mbika Muteba, Adisa Abdul-Ganiyu Jimoh, Dan Valentin Nicolae, South Africa
FF-008664: Torsional Behaviour of Large Synchronous Machines during
Asynchronous Start-Up and System Disturbances
Michael Freese, Jens Rosendahl, Stefan Kulig, Germany
22
Monday 3rd of September
Registration
Room: Poster & Exhibition (first floor) - Hour: 8:00-10:00
Opening ceremony
Room: Callelongue - Hour: 10:00-12:00
Welcome speeches
Keynote lectures (Co-chairs: Aldo Boglietti, Bertrand Nogarede)
Railway traction motors
Daniel L. Cadet ALSTOM Transport, France
Electricity transportation in Europe
X. Xxxxxxxxxx, RTE, France
Poster session 2
Room: Poster & Exhibition (first floor) - Hour: 10:00-18:00
Co-chairs: Mohamed Boussak, Rosario Miceli, Henk Polinder
FF-010545: Modelling of piezoelectric actuators used in forging processes:
principles and experimental validation
Thanh Hung Nguyen, Christophe Giraud-Audine, Betty Lemaire-Semail, Gabriel
Abba, Régis Bigot, Ensam, France
FF-002097: Scaling studies of High Speed High Temperature Superconducting
Generator
Murtuza Lokhandwalla, Kiruba Sivasubramaniam, James Alexander, USA
FF-002127: Empirical modeling of a squeeze film haptic actuator
Christophe Winter, Miroslav Markovic, Yves Perriard, Switzerland
FF-008923: Comparison of Analytical and FE Modeling of Vernier Hybrid
Machine
Luca Papini, Chris Gerada, Paolo Bolognesi, UK/Italy
FF-000574: Study on Improvement in the Motor Property by the Difference in
the Fabrication Density of the Soft Magnetic Composite
Koji Ikeda, Hideo Dohmeki, Japan
FF-006432: Scaling the virtual air gap principle to high voltage large power
applications
Jesus Avila Montes, Enrique Melgoza Vazquez, Mexico
FF-007978: Energy Transfer on Rotating Shafts Using PM-Printed Winding
Machine
Marco Bassetti, Francesco Braghin, Francesco Castelli-Dezza, Matteo F.
Iacchetti, Matteo M. Maglio, Italy
FF-009474: Large-diameter Ironless Permanent Magnet Generator for Offshore
Wind Power Application
23
Zhaoqiang Zhang, Alexey Matveev, Robert Nilssen, Arne Nysveen, Norway
FF-009016: Design of an arch-shaped FSPM Generator for the Seaquest
Concept
Alberto Serena, Marta Molinas, Norway
FF-003255: Design Optimisation of a Transverse Flux, Short Stroke, Linear
Generator
Louis Joubert, Jacques Schutte, Johannes Strauss, Robert Dobson, South
Africa
FF-005096: Magnet Segmentation in Tubular Linear Motors
Flavio Kalluf, Cristofaro Pompermaier, Mauricio Luz, Aleandro Espindola,
Brazil/Sweden
FF-003077: Transverse Flux Type Cylindrical Linear Synchronous Motor for
Large Thrust Using Generic Armature Cores for Rotary Machinery
Jung-Seob Shin, Takafumi Koseki, Houng-Joong Kim, Korea
FF-003123: Constrainted optimisation of a transverse flux PM linear generator
J Schutte, L.H. Joubert, J.M. Strauss, South Africa
FF-001317: Magnetic Gearbox with an Electric Power Output Port and Fixed
Speed Ratio for Wind Energy Applications
Ayman Abdel-Khalik, Shehab Ahmed, Ahmed Massoud, Ahmed Abbas,
Egypt/Qatar
FF-001325: A Coaxial Magnetic Gearbox with Magnetic Levitation Capabilities
Ayman Abdel-Khalik, Ahmed Massoud, Ahmed Abbas, Shehab Ahmed,
Egypt/Qatar
FF-001821: Analysis of the Bearingless AC Homopolar Motor
Eric L. Severson, Robert K. Nilssen, Tore M. Undeland, Ned Mohan,
USA/Norway
FF-004294: Proposal of an Axial-Type Magnetic-Geared Motor
Noboru Niguchi, Katsuhiro Hirata, Ariff Zaini, Shingo Nagai, Japan
FF-010073: Rotor Structure Suppressing Suspension Force Ripple in an IPM
Type Bearingless Motor with 2-pole Motor Windings and 4-pole Suspension
Windings
Tatsuya Matsuzaki, Masatugu Takemoto, Satoshi Ogasawara, Satoru Ota,
Kazunobu Oi, Daiki Matsuhashi, Japan
FF-002089: Design and optimization of a Permanent Magnet Transverse Flux
Machine
Cristofaro Pompermaier, Lars Sjöberg, Göran Nord, Sweden
FF-005037: A Global Approach for the Design of a Rim-Driven Marine Turbine
Generator for Sail Boat
Laurent Drouen, Jean-Frederic Charpentier, Eric Semail, Stephane Clenet,
France
FF-005746: Novel Rotor Design Optimization of Synchronous Reluctance
Machine for Low Torque Ripple
Reza Rajabi Moghaddam, Freddy Magnussen, Chandur Sadarangani, Sweden
24
FF-006297: Performance Comparison between Switching-Flux and IPM
Machine with Rare Earth and Ferrite PMs
Alessandro Fasolo, Luigi Alberti, Nicola Bianchi, Italy
FF-006467: Design and Optimization of Permanent Magnet Switch Reluctance
Machine for Renewable Energy Application
Hanzhou Liu, Thomas Wu, Jon Harms, Martin Epstein, Tad Chalfant, Louis
Chow, Wei Wu, Yuanli Bai, Yang Hu, Anthony Camarano, USA
FF-007013: Comprehensive Comparison of Novel Stator Surface-mounted
Permanent Magnet Machines
Zhang Yilian, China
FF-000299: Sensorless Variable Speed Single-Phase Induction Motor Drive
System Based on Direct Rotor Flux Orientation
Massimo Caruso, Vittorio Cecconi, Antonino Di Tommaso, Ronilson Rocha,
Italy/Brazil
FF-000868: Discrete Time Sliding Mode Observers for Sensorless Vector
Control of PMSM
Thiago Bernardes, Humberto Pinheiro, Hilton Grundling, Brazil
FF-001813: Speed Sensorless Sliding Mode Observer for Three-Phase
Induction Motor
Cristiane Cauduro Gastaldini, Rodrigo Padilha Vieira, Rodrigo Zelir Azzolin,
Hilton Abílio Grundling, Brazil
FF-002224: Maximum Generation Control System for Sensorless Wind Turbine
Generator
Yoko Amano, Japan
FF-002852: A Novel Starting Method for Sensorless Brushless DC Motors with
Current Limitation
Cassio Luciano Baratieri, Humberto Pinheiro, Brazil
FF-009342: A Sensorless Commutation Technique of a Brushless DC Motor
Drive System Using Two Terminal Voltages in Respect to a Virtual Neutral
Potential
Savvas Tsotoulidis, Athanasios Safacas, Greece
FF-005975: Identification of time-variant high frequency parameters for
sensorless control of PMSM using an internal model principle based HF current
control
Markus Seilmeier, Andreas Boehm, Bernhard Piepenbreier, Ingo Hahn,
Germany
FF-009326: Current Self-Control Applied to Sensorless Permanent Magnet
Synchronous Generators
Daniel Collier, Marcio Ortmann, Marcelo Heldwein, Brazil
FF-005584: Torque Dynamics in Sensorless PMSM Drives
Shuang Zhao, Oskar Wallmark, Sweden
FF-008265: Full Speed Range Sensorless IPM Motor Drives
Adriano Faggion, Silverio Bolognani, Emanuele Fornasiero, Luca Sgarbossa,
Italy
25
FF-009008: Implementation and tuning of the Extended Kalman Filter for a
sensorless drive working with arbitrary stepper motors and cable lengths
Mark Butcher, Alessandro Masi, Michele Martino, Andrea Tacchetti,
Switzerland/USA
FF-009318: Sensorless Speed Control of an Outrunner PMSM drive Connected
to Long Cable for Flying Remote Operative Vehicle
Moussa Bendjedia, Amor Khlaief, Mohamed Boussak, France
FF-011967: Sensorless Speed Control with MRAS for Induction Motor Drive
Youssef Agrebi Zorgani, Yassine Koubaa, Mohamed Boussak, Tunisia/France
FF-000639: An ANN Strategy Applied to Induction Motor Speed Estimator in
Closed-Loop Scalar Control
Tiago Henrique Santos, Alessandro Goedtel, Sérgio Augusto Oliveira Silva,
Marcelo Suetake, Brazil
FF-001295: Energy saving for induction motor control by extremum seeking
Thomas Devos, François Malrait, Rodolphe Sepulchre, France/Belgium
FF-002038: Evaluation of the Rotor Bar and End Ring Current Waveform of a
Brush DC Equivalent Controlled Multiphase Cage Rotor Induction Machine
Nkosinathi Gule, Maarten J. Kamper, South Africa
FF-002569: Torque Ripples Reduction of Five-Phase PMSM using Fractional
Order Regulator
Abdoulaye Dieng, Mohamed Fouad Benkhoris, Mourad Ait-Ahmed, France
FF-002607: Electric braking in BLDC motors with windings partially and
electronically shunted
Aleksander Frechowicz, Poland
FF-003476: Identification of Rotor Resistance and Transient Inductance of
Induction Motors Using Frequency Selection Criterion
Martin Jadric, Bozo Terzic, Marin Despalatovic, Goran Majic, Alojz Slutej, Toni
Simic, Croatia/Sweden
FF-003549: Fault-Tolerant Control Strategies for Quad-Inverter Induction Motor
Drives with One Failed Inverter
Gabriele Grandi, Padmanaban Sanjeevikumar, Yasser Gritli, Fiorenzo Filippetti,
Italy
FF-004251: A Nearly Constant Switching Frequency Current Hysteresis
Controller with Generalized Parabolic Boundaries using 12-sided Polygonal
Voltage Space Vectors for IM drives
K. Gopakumar, Najath Abdul Azeez, Anubrata Dey, Mathew K, Jaison Mathew,
India
FF-004812: Hybrid Control of the Two-Phase Induction Machine
Kenza Bouhoune, Krim Yazid, Mohamed Seghir Boucherit, Algeria
FF-004979: High Performance Controller for Multiphase Brushless DC Motor
Milena Dias, Jean Patric da Costa, Hauke Einfeld, Peter Zacharias, Germany
FF-005185: Dynamic Modeling and Control of a Brushless Doubly-Fed
Induction Generator with a Rotating Power Electronic Converter
Naveed ur Rehman Malik, Chandur Sadarangani, Sweden
26
FF-005193: Behavior of a Brushless Doubly-Fed Induction Generator with a
Rotating Power Electronic Converter during Symmetrical Voltage Sags
Naveed ur Rehman Malik, Chandur Sadarangani, Sweden
FF-005401: Space Vector Modulation Algorithm for Large Electric Drives
Thomas Nathenas, Georgios Adamidis, Greece
FF-005908: A Rotor Resistance MRAS Estimator for Induction Motor Traction
Drive for Electrical Vehicles
Ferdinando Mapelli, Alberto Bezzolato, Davide Tarsitano, Italy
FF-006718: Minimization of Torque Ripple in Switched Reluctance Motor
Drives Using an Enhanced Direct Instantaneous Torque Control
Javier Castro, Pere Andrada, Balduí Blanqué, Spain
FF-006858: Online Identification of Parameters Defining the Saturation
Characteristics of Induction Machines
Mikaela Ranta, Marko Hinkkanen, Finland
FF-007056: Extended Voltage Range AC Drive using a Z Source Indirect Matrix
Converter
Sergio Sousa, Sonia Pinto, Fernando Silva, Jose Maia, Portugal
FF-007838: Torque Ripple Minimization for PMSM using Online Estimation of
the Stator Resistances
Yanhui Xu, Nejila Parspour, Ulrich Vollmer, Germany
FF-008168: Sine Wave Filter For Stepper Motor Drives Working With Long
Cables
Ricardo Picatoste, Mark Butcher, Alessandro Masi, Switzerland
FF-008346: Analysis and Comparison of PWM Modulation Methods in VSI-Fed
PMSM Drive Systems
Maitane Aguirre, Patxi Madina, Javier Poza, Aitor Aranburu, Txomin Nieva,
Spain
FF-008486: Calorimetric Measurement of Variable Speed Induction Motor
Lassi Aarniovuori, Antti Kosonen, Markku Niemelä, Juha Pyrhönen, Finland
FF-008532: Eigenvalues Analysis Applied to the Stability Study of a Variable
Speed Pump Turbine Unit
Michel Han, Basile Kawkabani, Jean-Jacques Simond, Switzerland
FF-009539: A Simplified Characterization Method Including Saturation Effects
for Permanent Magnet Machines
Jorge G. Cintron-Rivera, Andrew S. Babel, Eduardo E. Montalvo-Ortiz,
Shanelle N. Foster, Elias G. Strangas, USA
FF-009598: Parametric Sensitivity in the Analysis and Control of Permanent
Magnet Synchronous Machines
Andrew S. Babel, Shanelle N. Foster, Jorge G. Cintron-Rivera, Elias G.
Strangas, USA
FF-009776: Variable Speed Induction Generator connected to AC Grid using
AC-DC-AC Structures controlled by LQ Current Regulators with Integral Action
Ronilson Rocha, José Silvino, Peterson Resende, Brazil
27
FF-010278: Maximizing the Energy Efficiency of a PMSM for Vehicular
Applications Using an Iron Loss Accounting Optimization Based on Nonlinear
Programming
Ali Rabiei, Torbjörn Thiringer, Johan Lindberg, Sweden
FF-010359: Study on a BLDC Motor Having Higher Winding Inductance: a Key
to Field Weakening
Seray Senol, Ozgur Ustun, UK/Turkey
FF-011355: Performance of two 5 MW Permanent Magnet Wind Turbine
Generators Using Surface Mounted and Interior Mounted Magnets
Poopak Roshanfekr, Torbjörn Thiringer, Mikael Alatalo, Sonja Lundmark,
Sweden
FF-011487: Study of the influence of the leading angle on the operating
characteristics of a current source inverter fed synchronous motor drive system
Vasile Manoliu, Romania
FF-006203: Fine grain commutation: integrated design of permanent-magnet
synchronous machine drives with highest torque density
Arijit Banerjee, Jeffrey H. Lang, James L. Kirtley, USA
FF-010561: Application of Artificial Intelligence Techniques to the Study of
Machine Signatures
Chen Wee-Yuan, Xu Jianxin, Sanjib Kumar Panda, Singapore
FF-006416: Finite Element Transient Thermal Analysis of PMSM for Aerospace
Applications
Themistoklis D. Kefalas, Antonios G. Kladas, Greece
FF-006637: Fault Tolerant Winding Design - A compromise Between Losses
and Fault Tolerant Capability
Puvan Arumugam, Tahar Hamiti, Chris Gerada, United Kingdom
FF-008125: A flexible magnetic circuit dedicated to Hall Effect Thruster
experiment
Carole Henaux, Raphaël Vilamot, Laurent Garrigues, Dominique Harribey,
France
FF-011118: Thermo-mechanical coupling in Nitinol. Application to an electromorphing plate
Maxime Chinaud, Amar Boussaid, Jean Francois Rouchon, Eric Duhayon,
Enrico Deri, Dominique Harribey, Marianna Braza, France
FF-007331: Condition Monitoring of Induction Motors fed by Voltage Source
Inverters. Statistical Analysis of Spectral Data
Oscar Duque-Perez, Luis Angel Garcia-Escudero, Daniel Morinigo-Sotelo,
Pedro Esteban Gardel, Marcelo Perez-Alonso, Spain
FF-011541: Time-Domain Approach for Fault Detection of Synchronous
Generator Broken Damper Bar
Abdelhalim Lalami, René Wamkeue, Canada
FF-002054: Analytical Model tacking account the Cross Saturation for the
Optimal Sizing of IPMSM
28
Sulivan Küttler, Khadija El-Kadri Benkara, Guy Friedrich, Franck
Vangraefschèpe, Abdenour Abdelli, France
FF-001309: Exact Analytical Prediction of Magnetic Field in a Hybrid and
Wound Excitation Synchronous Machine
Kamel Boughrara, Rachid Ibtiouen, Omar Touhami, Algeria
FF-002534: Analytical Modeling of Flux-Switching Machines using Variable
Global Reluctance Networks
Yang Tang, Emilia Motoasca, Johan J. H. Paulides, Elena A. Lomonova,
Netherlands
FF-011789: Analytical model of magnet bars of surface permanent magnet
slotless machine
Youcef Boutora, Rachid Ibtiouen, Noureddine Takorabet, Algeria/France
FF-003751: Mixed FEM2D - Analytical Method to Evaluate EMF and Torque in
Surface PM Synchronous Machines
Antonino Di Gerlando, Giovanni Foglia, Matteo Iacchetti, Italy
FF-005886: Analytical Modeling and Simulation of Highly Utilized Electrical
Machines Considering Nonlinear Effects
Manuel Gaertner, Frieder Schuller, Nejila Parspour, Peter Seibold, Germany
FF-006025: 2D Analytical Solution of Transverse Flux Induction Heating of the
Aluminum Plates
Youcef Ouazir, Ammar Abdi, Hakim Bensaidane, Algeria
FF-006661: A winding function-based model of air-gap eccentricity in saturated
induction motors
Adel Ghoggal, Salah Eddine Zouzou, Mohamed Sahraoui, Hamid Derghal,
Amel Hadri-Hamida, Algeria
FF-009156: Analytical Thermal Modelling of Axial Flux Permanent Magnet
Synchronous Machines
Guillaume Verez, Huguette Tiegna, Georges Barakat, Ghaleb Hoblos, France
FF-009288: Design approach of an axial flux motor for electrical powertrain
vehicle
Guillaume Krebs, Eric de Cecco, Claude Marchand, France
FF-011851: Simulation of Arbitrary Fault-Conditions in PM-Machines by
Generalized Unsymmetrical Modeling
Johann Mayer, Dieter Gerling, Germany
FF-002585: Modeling, Design and Simulation of Fuel Cell Modules for Small
Marine Applications
Nabil Benyahia, Toufik Rekioua, Nacer Benamrouche, Algeria
FF-006459: Oscillating Generator for Hybrid-Electrical and Electrical Vehicles
Sigitas Kudarauskas, Loreta Simanyniene, Lithuania
FF-006106: Flux-Regulation Capability of Hybrid-Excited Flux-Switching
Machines
Hua Wei, China
FF-002879: Influence of Design Parameters on Field Regulation Ability of a
Hybrid Excitation Synchronous Machine with Magnetic Shunt Rotor
29
Zhuoran Zhang, Chao Dai, Yangguang Yan, China
FF-008028: Axial Segmentation and Magnets Losses of SMPM Machines using
2D FE Method
Tofan Fadriansyah, Tennet, Tim Strous, Huisman, Henk Polinder, Netherlands
FF-008362: Multimodal interpolation of 3D finite element results for TPMLS
actuator inductance modeling
Ines Ben Salem, Lilia El Amraoui Ouni, Frederic Gillon, Tunisia/France
FF-001457: Dynamic Characteristics Analysis of Circuit Breaker with Oil
Dashpot Employing Improved Multi-Mesh Modification Method
Satoshi Suzuki, Yoshihiro Kawase, Tadashi Yamaguchi, Shuhei Toyama,
Wataru Koyanagi, Katsuhiro Hirata, Tomohiro Ota, Japan
FF-002291: Sensitivity analysis for phase inductances in Flux-Switching PM
machines
Esin Ilhan, Emilia Motoasca, Johan Paulides, Elena Lomonova, Maarten
Kremers, Netherlands
Oral sessions
TPC5-1 - Monitoring and diagnosis
Room: Callelongue – Hour: 14:00-16:00
Co-chairs: Fiorenzo Filippetti, Raphael Romary
FF-004243: A novel approach to detect short circuits in low voltage induction
motor by stray flux measurement
Lucia Frosini, Alessandro Borin, Luca Girometta, Giuseppe Venchi, Italy
FF-006114: Study of Synchronous Generator Static Eccentricities - FEM
Results and Measurements
Bruno A. T. Iamamura, Yvonnick Le Menach, Abdelmounaïm Tounzi, Nelson
Sadowski, Eilin Guillot, Thierry Jacq, Jérémy Langlet, France
FF-006831: High Performance Single and Multiple Faults Diagnosis in Voltage
Source Inverter fed Induction Motor drives
Mohamed Trabelsi, Mohamed Boussak, Abdelkader Chaari, France/Tunisia
FF-008443: A Comprehensive Condition Monitoring Solution for the
Transformer
Peter Kung, Lutang Wang, Maria Comanici, Canada
FF-009164: Detection of inter-turn short circuits in induction machines without
the knowledge of the healthy state
Remus Pusca, Raphael Romary, Andrian Ceban, France
FF-010596: Time-Domain Estimation of Sub-harmonic Sinusoidal Disturbance
in Sinusoidal Signal with Applications in Induction Motor Diagnostics
Abhisek Ukil, Switzerland
TPC5-2 - Measurements and testing
Room: Callelongue – Hour: 17:00-19:00
30
Co-chairs: Guy Clerc, Basile Kawkabani
FF-002143:
High
Frequency
Synchronous
Generator
Model
for
Electromagnetic Signature Analysis
Sheppard Salon, Keith Nelson, David Burow, Jan Stein, USA
FF-002208: Measurement and Analysis of In-Plane Eddy Current in Lamination
Steel Using a New Tester
Kazuo Shima, Takeo Murai, Tadashi Fukami, Yoko Furukawa, Akiyoshi
Komura, Japan
FF-003662: Direct Electric Losses Measurement for PM Brushless Machines
Eric Armando, Franco Villata, Paolo Guglielmi, Italy
FF-007943: Capacitance of Bearings for Electric Motors at Variable Mechanical
Loads
Eike Wittek, Michael Kriese, Sven Gattermann, Hans Tischmacher, Bernd
Ponick, Gerhard Poll, Germany
FF-008842: Evaluation of Inductance Measurement Methods for PM Machines
H. Bulent Ertan, Ilker Sahin, Turkey
FF-009547: Testing of Advanced Permanent Magnet Machines for a Wide
Range of Applications
Ayman EL-Refaie, Rebecca Nold, Kiruba Haran, Manoj Shah, Konrad Weeber,
Kum-Kang Huh, James Alexander, Charles Stephens, Steven Galioto, USA
TPC1-1 - Losses, thermal and efficiency analysis
Room: Morgiou – Hour: 14:00-16:00
Co-chairs: Mircea Popescu, Rafal Wrobel
FF-004723: 3-D Eddy Current Analysis in Steel Laminations of Electrical
Machines as a Contribution for Improved Iron Loss Modeling
Paul Handgruber, Andrej Stermecki, Oszkár Bíró, Anouar Belahcen, Emad
Dlala, Austria/Finland/USA
FF-005002: Design and Technology Solutions for High-Efficiency High-Speed
Motors
Fabio Luise, Alberto Tessarolo, Stefano Pieri, Piero Raffin, Massimiliano Di
Chiara, Freddie Agnolet, Maurizio Scalabrin, Italy
FF-006068: Strand-level Finite Element Model of AC Copper Losses in High
Speed Machines
Wenliang Chen, Yujing Liu, Jahirul Islam, Dmitry Svechkarenko, Sweden
FF-006734: The High-Frequency Induction Machine Parameters and Their
Influence on the Common Mode Stator Ground Current
Oliver Magdun, Andreas Binder, Germany
FF-007374: Numerical analysis of heat transfer and flow of stator duct models
Maximilian Schrittwieser, Andreas Marn, Ernst Farnleitner, Gebhard Kastner,
Austria
FF-008893: Electromagnetic Loss Computation in Large Hydroelectrical
Generator Using Different Existing Models
31
Arezki Merkhouf, Claude Hudon, Eilin Guillot, Ana Aguiar, Kamal Al-Haddad,
Canada/France
TPC3-1 - Electrical drives 1
Room: Morgiou – Hour: 17:00-19:00
Co-chairs: Seddik Bacha, Radu Bojoi
FF-000841: Enhanced Decoupling PWM Methods for Five-phase Open-end
Winding Drives
Nandor Bodo, Emil Levi, Martin Jones, United Kingdom
FF-004073: Electric Drive Dimensioning for a Hybrid Work Machine by Using
Virtual Prototyping
Juho Montonen, Finland
FF-004138: Position Control of Six-Phase Induction Machine using FractionalOrder Controller
Franck Betin, Gérard-André Capolino, Mahmood Moghadasian, France
FF-008591: A direct torque and reactive power control approach for doubly fed
induction generator in wind turbine applications
Qian Liu, Kay Hameyer, Germany
FF-006033: Analytical Redundancy for Service Continuity of Doubly Fed
Induction Machine Speed Drive
Mustapha Debbou, Meriem Abdellatif, Maria Pietrzak-David, France
FF-004588: Energy Optimization of Synchronous Generators by Using a Dual
Control
Fayçal Bensmaine, Abdallah Barakat, Slim Tnani, Gérard Champenois, Emile
Mouni, France
SS7 - Electrical machines for aerospace applications
Room: Sormiou – Hour: 14:00-16:00
Co-chairs: Chris Gerada, Antonios Kladas
FF-000752: Torque Enhanced Flux-Switching PM Machine for Aerospace
Applications
Christian Sanabria-Walter, Henk Polinder, Braham Ferreira, Peter Jänker,
Michael Hofmann, Germany/Netherlands
FF-002909: PM Synchronous Machines with Hybrid Excitation Systems and
Voltage Control Capabilities: a Review
Jacek Gieras, USA
FF-004278: Aerospace Actuator Design: a Comparative analysis of Permanent
Magnet and Induction Motor configurations
Panagiotis Kakosimos, Evangelos Tsampouris, Antonios Kladas, Chris Gerada,
Greece/UK
FF-005878: An Optimal Sensor Placement Strategy for Force and Torque
Analytical Models of a Reaction Sphere Actuator for Satellite Attitude Control
32
Leopoldo Rossini, Emmanuel Onillon, Olivier Chételat, Yves Perriard,
Switzerland
FF-007064: A Computationally Efficient Design Procedure for Actuator Motors
using Magnetic Reluctance- and Thermal Resistance Network Models
Michael Rottach, Chris Gerada, Tahar Hamiti, Pat Wheeler, United Kingdom
FF-010065: Electromechanical Actuator for Helicopter Rotor Damper
Application
Marco Villani, Marco Tursini, Giuseppe Fabri, Luca Castellini, Italy
TPC7-1 - Grid-connected and renewable energy applications 1
Room: Sormiou – Hour: 17:00-19:00
Co-chairs: Antonios Kladas, Mircea Radulescu
FF-001643: Impact of High-Penetration Photovoltaic on Synchronous
Generator Stability
Masaki Yagami, Junji Tamura, Japan
FF-006238: Direct Power Control of Variable-speed Micro-Hydropower Plant
Based on propeller turbine
Lakhdar Belhadji, Seddik Bacha, France
FF-001414: Voltage Stability Control of Wind Farm using PMSG based Variable
Speed Wind Turbine
Marwan Rosyadi, Muyeen S. M., Rion Takahashi, Junji Tamura, Japan/UAE
FF-008753: Development of a System for Testing Grid-Connected Permanent
Magnet Wind Generators
Jacques de la Bat, Mohamed Khan, Paul Barendse, South Africa
FF-008788: Control of a micro grid supplied by renewable energy sources and
storage batteries
Emmanouil Bakirtzis, Charis Demoulias, Greece
FF-008435: A methodology for optimization and cost analysis of hybrid
PV/wind/battery/diesel energy system
Lu Zhang, Georges Barakat, Adnan Yassine, France
TPC4-1 - Manufacturing and technological problems
Room: Riou – Hour: 14:00-16:00
Co-chairs: Anouar Belahcen, Sandy Smith
FF-001694: Comparison of the drying times for kraft paper and pressboard in
transformer factory drying
Rafael Villarroel, Diego F. García, Belén García, Juan C. Burgos, Spain
FF-001996: Influence of the Welding Process on the Magnetic Properties of a
Slot-less Permanent Magnet Synchronous Machine Stator Core
Andreas Krings, Shafigh Nategh, Oskar Wallmark, Juliette Soulard, Sweden
FF-002836: Impact of the assembly constraints on a multi-air gap linear motor
Philippe Enrici, Florian Dumas, Daniel Matt, France
33
FF-003603: Effect of Rotor Pole-Shoe Construction on Losses of Inverter-Fed
Synchronous Motors
Paavo Rasilo, Anouar Belahcen, Antero Arkkio, Finland
FF-004154: Effects of Manufacturing Dissymmetry in Axial Flux PM Machines
Antonino Di Gerlando, Giovanni Maria Foglia, Matteo Felice Iacchetti, Roberto
Perini, Italy
FF-009229: Evaluation of stator and rotor lamination materials for thermal
management of a PMaSRM
Shafigh Nategh, Andreas Krings, Zhe Huang, Oskar Wallmark, Mats Leksell,
Magnus Lindenmo, Sweden
TPC6-1 - Embedded applications 1
Room: Riou – Hour: 17:00-19:00
Co-chairs: Cristofaro Pompermaier, Thomas Wolbank
FF-001368: Hybrid Electric Vehicles dynamic power allocation method - Using
Ultracapacitors and Lithium Battery
Mamadou Bailo Camara, Brayima Dakyo, France
FF-003204: Effect of Driving Electric Machine Type on the System Efficiency of
an Industrial Forklift
Tatiana Minav, Lasse Laurila, Juha Pyrhönen, Finland
FF-003409: A Direct Drive Multi-Speed Induction Motor for Electric Traction
Applications
Bogdan Virlan, Seifeddine Ben Elghali, Adrian Munteanu, Alecsandru Simion,
Rachid Outbib, France
FF-004618: An innovative current-limiting device for automotive micro-hybrid
starter motors
Nicolas Labbe, France
FF-007927: Frequency Domain Non-Linear Identification Method for High
Voltage Pulse Transformers
Davide Aguglia, Philippe Viarouge, Carlos Martins, Switzerland/Canada
FF-007854: Design of an Integrated Electromagnetic Actuator for High
Frequency Damping Forces
Jakub Emmrich, Wladimir Bickel, Berend Denkena, Bernd Ponick, Germany
SS10 - Hybrid excitation synchronous machines
Room: En Vau – Hour: 14:00-16:00
Co-chairs: Sami Hlioui, Lionel Vido
FF-001465: Feasibility of different excitation methods of synchronous
generators in island operation
Katteden Kamiev, Janne Nerg, Juha Pyrhönen, Valeriy Zaboin, Juan Tapia,
Finland/Russian Federation/Chile
FF-005045: Comparison of Flux Weakening Capability in Alternative Switched
Flux Permanent Magnet Machines by Mechanical Adjusters
34
Zi-Qiang Zhu, Mahir Al-Ani, Xu Liu, Masahiko Hasegawa, Adam Pride, Rajesh
Deodhar, United Kingdom
FF-005916: Analysis of Electromagnetic Torque in Sinusoidal Excited Switched
Reluctance Machines Having DC Bias in Excitation
Xu Liu, Ziqiang Zhu, Zaiping Pan, United Kingdom/China
FF-008079: Study of a New Hybrid Excitation Synchronous Machine
Boumedyen Nedjar, Sami Hlioui, Michel Lécrivain, Yacine Amara, Lionel Vido,
Mohamed Gabsi, France
FF-009075: Influence of the Ratio of Hybridization on the Performances of
Synchronous Generator with Hybrid Excitation
Aymen Ammar, Alexandru C. Berbecea, Frédéric Gillon, Pascal Brochet,
France
FF-011762: Design and Experimental Evaluation of a Compact Hybrid
Excitation Claw-Pole Rotor
Dan Hagstedt, Avo Reinap, Jonas Ottosson, Mats Alaküla, Sweden
SS12 - Education in electro-mobility
Room: En Vau – Hour: 17:00-19:00
Co-chairs: Luca Ferraris, Alberto Tenconi
FF-007366: Practical experiment for students - winding an induction machine
Cornelia Stuebig, Bernd Ponick, Germany
FF-005266: An Educational Tool for Monitoring Electrical Power Components in
Induction Machines
Merit Cisneros Gonzalez, Marco Antonio Arjona Lopez, Mexico
FF-004049: Teaching Linear Motors and Magnetic Levitation at Graduate Level
Jacek Gieras, Poland
FF-004626: Experiences from a Distance Course in Electric Drives including
on-line Labs and Tutorials
Sonja Tidblad Ali Rabiei, Tarik Abdulahovic, Stefan Lundberg, Torbjörn
Thiringer, Mikael Alatalo, Emma Arfa Grunditz, Christian Du-Bar, Sweden
FF-04111: Electric Vehicles - Educational Aspects
Uwe Schaefer, Germany
FF-004715: Student Learning Projects in Electric Vehicle Engineering
Ewen Ritchie, Krisztina Leban, Denmark
IEEE-IES Technical Committee on Electrical Machines Meeting
Room: Callelongue – Hour: 19:00-20:00
Chair: David Dorrell
35
Tuesday 4th of September
Poster session 3
Room: Poster & Exhibition (first floor) - Hour: 8:00-19:00
Co-chairs: Vincent Debusschere, Antonino Di Gerlando, Pragasen Pillay
FF-000825: Development and Algorithmic Implementation of a New Concept
for the Preliminary Draft of Electrical Machines
Quirin Hecker, Wolfgang Meyer, Philipp Bahr, Hans-Georg Herzog, Germany
FF-001252: Study of Double Cage Induction Motors with Different Rotor Bar
Materials
Konstantinos N. Gyftakis, Dimitrios Athanasopoulos, Joya Kappatou, Greece
FF-001279: The Influence of Semi-magnetic Wedges on the Electromagnetic
Variables and the Harmonic Content in Induction Motors
Konstantinos N. Gyftakis, Panagiotis A. Panagiotou, Joya Kappatou, Greece
FF-004324: Optimization of startup characteristics of medium power
asynchronous motors with short circuit rotor
Aurel Campeanu, Ion Vlad, Sorin Enache, Ladislau Augustinov, Gheorghe
Liuba, Ioan Cautil, Romania
FF-007528: Approach for a Demand Compliant Choice of Induction Machines
Used in Roller Conveyors
Alexander Conradi, Dominique Melot de Beauregard, Burkhard Benthaus,
Leslaw Golebiowski, Poland
FF-011002: Interval arithmetic tool for optimal design of induction machines
Dmitry Samarkanov, Frédéric Gillon, Pascal Brochet, Daniel Laloy, France
FF-002194: Analytical Design Algorithm and FEM Analysis of the dual-rotor
Permanent Magnet Induction Machine
Ana Maria Gazdac, Augustin Mpanda Mabwe, Claudia Martis, Franck Betin,
Karoly Biro, Romania/France
FF-001872: Study on Permanent Magnet Generator for Diesel Electric
Propulsion System
Masahiro Hori, Mamoru Kimura, Akiyoshi Komura, Seikichi Masuda, Daisuke
Koori, Takayuki Koizumi, Japan
FF-001945: Models for sizing and optimization of PMG: designing a set of two
machines
Renato Carlson, Frederic Wurtz, Helio Voltolini, Brazil/France
FF-002712: Optimal Design Approach Developed for Permanent Magnet
Motors
Imen Amdouni, Lilia El Amraoui, Mohamed Benrejeb, Pascal Brochet, Frederic
Gillon, Tunisia/France
FF-000388: Analytical Optimization and Comparison of Torque Densities
between Permanent Magnet and Electrically Excited Machines
Wenqiang Chu, Ziqiang Zhu, Jintao Chen, China
36
FF-000264: Steady-State and Transient Analysis of an Axial-Field Magnetic
Coupling
Thierry Lubin, Smail Mezani, Abderrezak Rezzoug, France
FF-007897: Optimization and Comparison of Electrical Machines using Particle
Swarm Optimization
M. van der Geest, H. Polinder, J.A. Ferreira, D. Zeilstra, Netherlands
FF-005983: Torque Ripple Reduction in Fractional-Slot Interior PM Machines
Optimizing the Flux-Barrier Geometries
Massimo Barcaro, Nicola Bianchi, Italy
FF-001201: Reducing the permanent magnet content in fractional-slot
concentrated-windings permanent magnet synchronous machines
Peter Sergeant, Alex Van den Bossche, Belgium
FF-007048: Criteria for Optimal Design of Interior Permanent Magnet Motor
Series
Damir Arko, Stjepan Stipetić, Croatia
FF-002364: Design Process of Traction Motor having Tooth Coil Windings
Juho Montonen, Pia Lindh, Juha Pyrhönen, Finland
FF-001678: A Design of Axial-gap Switched Reluctance Motor for In-wheel
Direct-Drive EV
Tohru Shibamoto, Kenji Hiroki Goto, Kenji Nakamura, Osamu Ichinokura,
Japan
FF-002801: Ferrite Assisted Synchronous Reluctance Machines: a General
Approach
Alfredo Vagati, Barbara Boazzo, Paolo Guglielmi, Gianmario Pellegrino, Italy
FF-004952: Design Study and Experimental Analysis of Wound Field Flux
Switching Motor for HEV Applications
Erwan Sulaiman, Takashi Kosaka, Nobuyuki Matsui, Japan
FF-001864: A Study of Permanent Magnet Rotor for Large Scale Wind Turbine
Generator System
Mamoru Kimura, Daisuke Kori, Akiyoshi Komura, Hiroyuki Mikami, Kazumasa
Ide, Tetsuo Fujigaki, Motonobu Iizuka, Masashi Fukaya, Japan
FF-001198: Size Spectrum Investigation of Mini Turbogenerators for Gas
Turbine Units
Viktor Antipov, Irina Kruchinina, Andrey Grozov, Anna Ivanova, Russian
Federation
FF-002798: Theoretical Analysis of the Reversed Claw Poles Alternator
Performances
Felicia Surdu, Ágoston Károly Biró, Claudia Steluţa Marţiş, Raluca Trifa,
Romania
FF-010618: 5MW Direct Drive Wind Turbine Generator Design
Arsalan Hussain Zaidi, Lucille Senn, Iratxe Ortega, Przemyslaw Radecki,
Ireneusz Szczesny, Mustafa Erkec, Ewen Ritchie, Krisztina Leban, Denmark
37
FF-002402: Defining Proper Initial Geometry of an 8 MW Liquid-Cooled DirectDrive Permanent Magnet Synchronous Generator for Wind Turbine
Applications Based on Minimizing Mass
Yulia Alexandrova, Finland
FF-010804: The Concept of Imaginary Machines for Design and Setting of
Optimization Problems: Application to a Synchronous Generator
Frederic Wurtz, Patrick Kuo Peng, Elissa De Carvalho, France/Brazil
FF-001848: Magnetic Stress and Support Plate Deflection of Halbach Array
Magnets
Tetsuzo Sakamoto, Japan
FF-002631: A Design Example of An 8-pole Radial AMB for Flywheel Energy
Storage
Mohamed I. Daoud, Ayman S. Abdel-Khalik, Ahmed M. Massoud, Shehab
Ahmed, Nabil H. Abbasy, Qatar/Egypt
FF-003514: Analytical Analysis of a Radial Flux Air-Cored Permanent Magnet
Machine with a Double-Sided Rotor and Non-overlapping Double-layer
Windings
Peter J. Randewijk, Maarten J. Kamper, South Africa
FF-010812: Planetary Gearbox Effects on Induction Machine in Wind Turbine:
Modeling and Analysis
Zahra Daneshi-Far, Humberto Henao, Gérard-André Capolino, France
FF-007226: Metrological Characterization of an Ironless Position Sensor
Prototype
Alessandro Danisi, Roberto Losito, Alessandro Masi, Yves Perriard,
Switzerland
FF-005576: A Brush Model for detailed Commutation Analysis of Universal
Motors
Matthias Willig, Timothy Miller, Isidro Corral, United Kingdom/Germany
FF-006726: Simulation of electrical machines end effects with reduced length
3D FEM models
Bogdan Funieru, Andreas Binder, Germany
FF-004332: Simulation of Asynchronous Operation in High Power Salient Pole
Synchronous Machines
Aurel Campeanu, Sorin Enache, Ion Vlad, Gheorghe Liuba, Ladislau
Augustinov, Ioan Cautil, Romania
FF-006319: Commutator wear due to drawn arcs
France Pavlovcic, Slovenia
FF-003891: Experimental Identification and Reduction of Acoustic Noise in
Small Brushed DC Motors
Aldo Boglietti, Andrea Cavagnino, Seyedamin Saied, Silvio Vaschetto, Italy/Iran
FF-000108: Interturn Short-circuit Analysis in an Induction Machine by Finite
Elements Method and Field Tests
Martha Amaya Enciso, Dario Diaz Sanchez, Alejandro Paz Parra, Colombia
38
FF-000604: Comparison of different methods to determine defects in the stator
core
Christian Kreischer, Leslaw Golebiowski, Poland
FF-000612: Fault Detection and Diagnosis of Induction Motors Based on
Hidden Markov Model
Abdenour Soualhi, Guy Clerc, Hubert Razik, Abdesselam Lebaroud,
France/Algeria
FF-001155: Diagnosis of Broken Rotor Bar Faults by Using Frequency
Spectrum of Stator Current Envelope
Hayri Arabaci, Osman Bilgin, Turkey
FF-001236: The Influence of the Broken Bar Fault on the Magnetic Field and
Electromagnetic Torque in 3-phase Induction Motors
Dionysios V. Spyropoulos, Konstantinos N. Gyftakis, Joya Kappatou,
Epaminondas D. Mitronikas, Greece
FF-001341: Influence of the Magnetic Steel Encasing of Induction Motors on
the Efficiency of the Rotor Faults Diagnosis based on the Harmonics of the Coil
Sensors Output Voltage
Virgiliu Fireteanu, Petrica Taras, Romania
FF-001538: Ageing Due to Thermal Cycling by Power Regulation Cycles in
Lifetime Estimation of Hydroelectric Generator Stator Windings
Voitto Kokko, Finland
FF-002135: Rotor Fault Diagnosis in a Squirrel-Rotor Cage Induction Machine
Using Support Vector Machines
Samir Hamdani, Hamza Mezerreg, Bilal Boutikar, Lahcène Noureddine, Omar
Touhami, Rachid Ibtiouen, Algeria
FF-002755: Induction Motor Stator Fault Diagnosis Technique Using Park
Vector Approach and Complex Wavelets
Dionysios V. Spyropoulos, Epaminondas D. Mitronikas, Greece
FF-003581: Design of Large Synchronous Turbo-Generator Monitoring System
Marinko Kovacic, Zlatko Hanic, Mario Vrazic, Croatia
FF-005428: Telemetry diagnostic capabilities for asynchronous motors
Adam Decner, Poland
FF-005614: Virtual Instrumentation Use in Static Excitation Systems
Marius Biriescu, Gheorghe Liuba, Ladislau Augustinov, Gheorghe Madescu,
Valentin Nedelea, Martian Mot, Romania
FF-005967: New techniques to simulate and diagnose stator winding faults in
low voltage induction motors
Lucia Frosini, Alessandro Borin, Andrea Albini, Francesco Benzi, Italy
FF-006211: Artificial Neural Networks Based Fault Detection in 3-Phase PMSM
Traction Motor
Saeid Moosavi, France
FF-006327: Three-Level NPC Inverter Fault Diagnosis by the Average Current
Park’s Vector Approach
Mohsen Abadi, André Mendes, Sérgio Cruz, Portugal
39
FF-006475: Current Residue Based Load Independent Eccentricity Detection in
Salient Pole Synchronous Machines
Thirumarai Ilamparithi, Subhasis Nandi, Canada
FF-006483: An Improved Algorithm for Detection of Rotor Faults in Squirrel
Cage Induction Motors Based on a New Fault Indicator
Mohamed Sahraoui, Salah Eddine Zouzou, Adel Ghoggal, Salim Guedidi,
Hamid Derghal, Algeria
FF-007501: Braking torque analysis of PMSM Motor under Stator Winding
Failures
Syed Hossain, Evandro Oliveira, USA/Portugal
FF-007935: Accurate stator fault detection Insensitive to the unbalanced
voltage in induction motor
Monia Bouzid, Gérard Champenois, Tunisia/France
FF-008109: A Geometrical Simple Approach for Power Silicon Devices Fault
Detection and Fault-Tolerant Operation of a Voltage Source Inverter
Antonino O. Di Tommaso, Fabio Genduso, Rosario Miceli, Italy
FF-008524: Impedance Angle Changes Analysis Applied to Short Circuit Fault
Detection
Saeid Moosavi, France
FF-008745: Modelling and Detection of Bearing Faults in Permanent Magnet
Synchronous Motors
Ali Rezig, Abdoul-Ousman N’Diaye, Abdesslem Djerdir, Mohamed Rachid
Mekideche, Algeria/France
FF-011894: An Efficient Architecture of Multi-Stage Neural Network for WoundRotor Induction Generator Short-Circuit Fault Classification
Samuel Toma, Laurent Capocchi, Gérard-André Capolino, France
FF-010367: Fault Detection in Copper-Rotor SEIG System Using Artificial
Neural Network for Distributed Wind Power Generation
Lakshmi Varaha Iyer, Xiaomin Lu, Kaushik Mukherjee, Narayan Kar, Canada
FF-011819: Bearing Fault Diagnosis Based on Autoregressive Modeling and
SVM
Tawfik Thlaidjia, Salah Chenikher, Algeria
FF-009369: Diagnosis of faults in induction generators under fluctuating load
conditions through the instantaneous frequency of the fault components
Francisco Vedreño-Santos, Martin Riera-Guasp, Humberto Henao, Manuel
Pineda-Sanchez, Spain/France
FF-007161: Investigations on bearing currents in converter-fed electrical motors
Hans Tischmacher, Sven Gattermann, Germany
FF-000361: Behavior of a single phase grid transformer during out-of-phase
synchronizations
Zhijun Ye, Christian Kreischer, Stefan Kulig, Germany
FF-000698: Predict the rupture of transformer tanks with static FEM analysis
Alexander Hackl, Peter Hamberger, Austria
40
FF-001082: A Novel Technique for Differential Protection of Power
Transformers
Adel Aktaibi, Azizur Mohamed Rahman, Canada
FF-003638: China Actions in Higher Efficient Transformers Promotion
Lingyu Zhang, Kai Zhao, China
FF-003646: Optimized Methods to Evaluate Efficient Distribution Transformers
Lingyu Zhang, Kai Zhao, Desheng Xu, China
FF-003727: Modeling Continuous Windings under Transients with TLM and
ATP
Sérgio Cabral, Anderson Nunes, Marconi Januário, Geferson Farina, Brazil
FF-006041: Global transformer design optimization using deterministic and
non-deterministic algorithms
Eleftherios Amoiralis, Marina Tsili, Antonios Kladas, Greece
FF-007757: FEM Modeling of Skin and Proximity Effects for Coreless
Transformers
Pascal Meyer, Yves Perriard, Switzerland
FF-008737: Novel procedure for low frequency FRA traces interpretation
Wilder Herrera, Guillermo Aponte, Carlos Gonzalez-Garcia, Jorge Pleite,
Colombia/Spain
FF-010332: 3D Calculation and Modeling of Eddy Current Losses in a Large
Power Transformer
Alexandre Milagre, Mauricio Ferreira da Luz, Glauco Cangane, Alexandre
Komar, Paulo Avelino, Brazil
FF-006548: Terminal Measurements Based Modeling of Single Phase
Transformer for Condition Monitoring
Shnatanav Bhowmick, Subhasis Nandi, Canada
FF-000418: Optimum Design of Electromagnetic Solenoid by Using Artificial
Bee Colony (ABC) Algorithm
Wataru Kitagawa, Takaharu Takeshita, Japan
FF-002259: Integration of an Inductive Position Sensor and a Contactless
Energy Transfer System
J.P.C. Smeets, T.T. Overboom, J.W. Jansen, E.A. Lomonova, Netherlands
FF-008303: Surface Partial Discharges Aging on Thin Polymeric
Nanocomposite Films
Francesco Guastavino, Alessandro Ratto, Laura Della Giovanna, Jose Manuel
Gomez-Elvira, Nuria Garcia, Italy/Spain
FF-008389: Diagnosis of Common Defects Inside Cast Resin Current
Transformers by Digital Partial Discharges Acquisition
Francesco Guastavino, Eugenia Torello, Alessandro Ratto, Andrea Dardano,
Massimo Secci, Federico Ferraro, Diego Pistone, Italy
FF-000078: Core Losses Measurement Technique for High Frequency and
Flux Density of Switched Reluctance Machines
Minh Dinh Bui, Uwe Schaefer, Germany
FF-000256: Progress on formulas for core loss calculations
41
Jemimah Akiror, Canada
FF-000175: Temperature dependency of the efficiency of Line Start Permanent
Magnet Machines
Colin Debruyne, Stijn Derammelaere, Jan Desmet, Lieven Vandevelde,
Belgium
FF-001597: Basic Examination of Eddy Current loss Estimation in SPM Motor
Based on Electric and Magnetic Networks
Yukihiro Yoshida, Kenji Nakamura, Osamu Ichinokura, Japan
FF-001724: Influence of electrical steel grade on the temperature distribution in
direct-drive PM synchronous generators for 5 MW wind turbines
Damian Kowal, Peter Sergeant, Luc Dupre, Lode Vandenbossche, Belgium
FF-001961: A Methodology for Quality Analysis on Stator Cores
Aleandro Espindola, Jean Schlegel, Afranio Junior, Nelson Batistela, Nelson
Sadowski, João Bastos, Patrick Kuo-Peng, Flavio Kalluf, Brazil
FF-009024: Equivalent core-loss resistance identification for interior
permanent-magnet synchronous machines
Ionut Andrei Lar, Mircea Radulescu, Romania
FF-000485: Prediction of Eddy Current Losses of Surface Mounted Permanent
Magnet Servo Motor
Ramia Deeb, Marcel Janda, Zbynek Makki, Czech Republic
FF-001066: Precise Calculation and Optimization of Rotor Eddy Current Losses
in High Speed Permanent Magnet Machine
Mohammad Etemadrezaei, Johan Wolmarans, Henk Polinder, Bram Ferreira,
Netherlands
FF-004847: On the Validity of the Harmonic Superposition Principle for
Computing Rotor Eddy Current Losses in Permanent Magnet Machines
Alberto Tessarolo, Mario Mezzarobba, Mauro Bortolozzi, Italy
FF-010391: Use of Time-Harmonic FE Analysis to Compute Rotor EddyCurrent Losses in Synchronous Machines Subject to Distorted Stator Currents
Fabio Luise, Alberto Tessarolo, Freddie Agnolet, Mario Mezzarobba, Italy
FF-008001: Improvement and Validation of an Iron Loss Model for
Synchronous Machine
Anthony Frias, Afef Kedous-Lebouc, Christian Chillet, Laurent Albert, Lionel
Calegari, France
FF-005843: Negative Sequence Losses in Turbine Generator Rotors
Christopher P. Riley, United Kingdom
FF-000663: Thermal Modelling of a Claw-Pole Car Alternator - Steady-State
Computation and Identification of free Convection coefficients
Olivier Maloberti, Anthony Gimeno, Alejandro Ospina, Guy Friedrich, Loic
Charbonnier, Khadija El-Kadri Benkara, France
FF-002577: Thermal Modeling of Directly-Oil-Cooled Permanent Magnet
Synchronous Machine
Pavel Ponomarev, Maria Polikarpova, Juha Pyrhönen, Finland
42
FF-003115: Robust Thermal Model for the Estimation of Rotor Cage and Stator
Winding Temperatures of Induction Machines
Christian Kral, Anton Haumer, Sang Bin Lee, Austria/Korea
FF-004901: Thermal Analysis of Duplex 3-Phase Induction Motor Under Fault
Operating Conditions
Mircea Popescu, David Dorrell, Luigi Alberti, Nicola Bianchi, David Staton,
Douglas Hawkins, United Kingdom/Australia/Italy
FF-003166: Coupled fluid-thermal network modeling approach for electrical
machines
Matthias Centner, Ilja Sabelfeld, Germany
FF-005258: Characterization and Application of Forced Cooling Channels for
Traction Motors in HEVs
Zhe Huang, Francisco Marquez, Mats Alakua, Jinliang Yuan, Sweden
FF-006823: Compensation of Speed Dependency in Sensorless Rotor
Temperature Estimation for Permanent Magnet Synchronous Motor
Martin Ganchev, Christian Kral, Thomas Wolbank, Austria
Oral sessions
TPC4-2 - Thermal problems
Room: Morgiou - Hour: 8:00-10:00
Co-chairs: Andrea Cavagnino, Christian Kral
FF-001228: Thermal Design and Analysis of a Direct-Water Cooled Direct Drive
Permanent Magnet Synchronous Generator for High-Power Wind Turbine
Application
Maria Polikarpova, Pekka Royta, Julia Alexandrova, Scott Semken, Janne
Nerg, Juha Pyrhonen, Finland
FF-006882: Estimation of Equivalent Thermal Parameters of Electrical
Windings
Nick Simpson, Phil. H Mellor, Rafal Wrobel, United Kingdom
FF-007005: Characterizing the convective wall heat transfer on convoluted
shapes in the end-region of an induction machine
Martin Hettegger, Alice Reinbacher-Köstinger, Oszkár Bíró, Austria
FF-004855: Calorimetric Measurement of Stator Core Losses
Deepak Singh, Antero Arkkio, Finland
FF-007714: Scaling of AC Copper Loss in Thermal Modeling of Electrical
Machines
Rafal Wrobel, Antonio Griffo, Phil Mellor, United Kingdom
FF-009997: Thermal Analysis of an Axial Flux Permanent Magnet Machine
Ângela Ferreira, Artur Costa, Portugal
TPC1-2 - Fractional slot machines
Room: Morgiou - Hour: 10:30-12:30
43
Co-chairs: Jean-Frederic Carpentier, Zi-Qiang Zhu
FF-000647: Simple and Accurate Analytical Estimation of Slotting Effect on
Magnet Loss in Fractional-Slot Surface-Mounted PM Machines
Z. X. Fang, United Kingdom
FF-000779: Effect of Segmentation on Eddy-Current Loss in PermanentMagnets of Axial-Flux PM Machines using a Multilayer-2D - 2D Coupled Model
Hendrik Vansompel, Peter Sergeant, Luc Dupré, Belgium
FF-001406: Study of Special Winding for Reduction of Space Flux Harmonics
Caused by Fractional-Slot
Kazuma Tsujikawa, Tadashi Tokumasu, Mikio Kakiuchi, Daisuke Hiramatsu,
Takashi Ueda, Masafumi Fujita, Masayuki Ichimonji, Kazunori Ikeda, Toru
Otaka, Japan
FF-001619: A Novel 12-Teeth/10-Poles PM Machine with Flux Barriers in
Stator Yoke
Gurakuq Dajaku, Dieter Gerling, Germany
FF-006572: Modelling of Surface PM Machine Using Soft Magnetic Composites
and a Bonded Magnet Ring
Chun Tang, Wen L. Soong, Gene S. Liew, Nesimi Ertugrul, Australia
FF-011673: Fractional-Slot Concentrated-Winding Axial-Flux PermanentMagnet Machine with Tooth-Wound Coils
Fabio Giulii Capponi, Giulio De Donato, Antonio Rivellini, Federico Caricchi,
Italy
TPC4-3 - Magnetic materials
Room: Morgiou - Hour: 14:00-16:00
Co-chairs: Andy Knight, Peter Osmand Rasmussen
FF-000426: Rotational Core Loss Measurements in Clockwise and
Counterclockwise Directions
Natheer Alatawneh, Pragasen Pillay, Canada
FF-000434: Estimation of Magnetic Properties and Damaged Area Width Due
to Punching Process: Modeling and Experimental Research
Zbigniew Gmyrek, Andrea Cavagnino, Luca Ferraris, Italy
FF-002844: An Examination of Magnetic Property Variation of SpecificationAcceptable Electrical Steel
Steve Sprague, USA
FF-008141: Interior PM Machines using Ferrite to Substitute Rare-Earth
Surface PM Machines
Massimo Barcaro, Nicola Bianchi, Italy
FF-006793: Rotor Design for PM Generators Reflecting the Unstable
Neodymium Price
Sandra Eriksson, Hans Bernhoff, Sweden
FF-010014: Design of a Permanent Magnet Synchronous Motor with Grain
Oriented Electrical Steel for Direct-Drive Elevators
44
Stefano Cicalè, Luciano Albini, Francesco Parasiliti, Marco Villani, Italy
TPC1-3 - IPM Machines
Room: Morgiou - Hour: 17:00-19:00
Co-chairs: Jacek Gieras, Noureddine Takorabet
FF-004707: Design of Direct-Driven Permanent Magnet Synchronous Motors
for an Electric Sports Car
Janne Nerg, Finland
FF-005541: Design Characteristics of PMa-SynRM and Performance
Comparison with IPMSM Based on Numerical Analysis
Yun-Ho Jeong, Kwangdeok Kim, Yong-Jae Kim, Byung-Sup Park, Sang-Yong
Jung, Korea
FF-006904: Performances Characteristics of Interior Permanent-Magnet
Synchronous Machines with Distributed Windings: Railway Application
Abdessamed Soualmi, Frédéric Dubat, Andry Randria, Christophe Espanet,
France
FF-008613: Influence of Steel BH Characteristics on IPMSM Performance
Shah Rahman, Babak Vaseghi, Andrew Knight, Canada
FF-009393: Multi-Objective Optimization of an Interior PM Motor for a HighPerformance Drive
Nicola Bianchi, Dario Durello, Emanuele Fornasiero, Italy
FF-011134: Optimal Rotor Shape with Third Harmonic for Maximizing Torque
and Minimizing Torque Ripple in IPM Motors
K Wang, Z.Q Zhu, G Ombach, W. Chlebosz, United Kingdom/Germany
TPC3-2 - Electrical drives 2
Room: Sormiou - Hour: 8:00-10:00
Co-chairs: Hamid Ben Hamed, Andreas Binder
FF-000167: Sensorless Vector Control for Hermetic Refrigeration Compressor
Rodrigo Z. Azzolin, Rodrigo P. Vieira, Cristiane C. Gastaldini, Hilton A.
Gründling, Brazil
FF-007358: Inclusion of Magnetic Saturation in Dynamic Models of
Synchronous Reluctance Motors
Zengcai Qu, Toni Tuovinen, Marko Hinkkanen, Finland
FF-011797: Comparative performance analysis of field-oriented control and
direct torque control for a fractional-slot concentrated winding interior
permanent magnet synchronous machine
Dai Nguyen, Rukmi Dutta, Fazlur M Rahman, Australia
FF-010413: Towards the automatic tuning of MTPA algorithms for IPM motor
drives
Riccardo Antonello, Matteo Carraro, Mauro Zigliotto, Italy
FF-010588: Position Control of Six-Phase Induction Motor using Fuzzy Logic :
Application to Electric Power Steering
45
Franck Betin, Gérard-André Capolino, Arnaud Sivert, France
FF-011959: Maximum Torque-per-Ampere Control of Permanent Magnet
Synchronous Machines
Wei Wang, Babak Fahimi, Morgan Kiani, USA
SS8-1 - Design of electrical machines for the automotive sector 1
Room: Sormiou - Hour: 10:30-12:30
Co-chairs: Malcolm McCulloch, Avoki Omekanda
FF-003387: Sensorless-Oriented Design of Concentrated-Winding IPM Motors
for HEV Drive Application
Yoshiaki Kano, Takashi Kosaka, Nobuyuki Matsui, Masami Fujitsuna, Japan
FF-008656: Design and Evaluation of Electrical Machine for Parallel Hybrid
Drive for Heavy Vehicles
Rasmus Andersson, Avo Reinap, Mats Alaküla, Sweden
FF-003778: A Computationally Efficient Design Technique for Electric Vehicle
Traction Machines
Panagiotis Lazari, Jiabin Wang, Liang Chen, United Kingdom
FF-008397: A Novel Interior Permanent Magnet Motor Design with a SelfActivated Flux-Weakening Device for Automotive Applications
Alberto Tessarolo, Mario Mezzarobba, Roberto Menis, Italy
FF-006769: New Hybrid Reluctance Motor Drive
Pere Andrada, Balduí Blanqué, Eusebi Martínez, Marcel Torrent, Spain
FF-009903: Design and Evaluation of Moulded Powder-Core Machine for InWheel Drive Application
Avo Reinap, Leif Svensson, Mats Alaküla, Mats Andersson, Sweden
SS8-2 - Design of electrical machines for the automotive sector 2
Room: Sormiou - Hour: 14:00-16:00
Co-chairs: Ayman El-Refaie, Malcolm McCulloch
FF-009415: A Review of High Power Density Switched Reluctance Machines
Suitable for Automotive Applications
Yuan Gao, Malcolm McCulloch, United Kingdom
FF-007668: Redesign of an Electrical Rear Wheel Drive (E-RWD) for a Hybrid
Vehicle in a given drive cycle
Francisco J. Márquez-Fernández, Zhe Huang, Mats Alaküla, Sweden
FF-007609: Design of a Transverse Flux Permanent Magnet Excited Machine
as a Near-Wheel Motor for the Use in Electric Vehicles
Peter Seibold, Manuel Gaertner, Frieder Schuller, Nejila Parspour, Germany
FF-006084: Design optimisation of permanent magnet assisted synchronous
reluctance machines for electric vehicle applications
Liang Chen, Jiabin Wang, Patrick Lombard, Panagiotis Lazari, Vincent Leconte,
United Kingdom/France
FF-003433: Innovative Design for Flux Leakage Reductin in IPM Machines
46
Maddalena Cirani, Sture Eriksson, Jonas Thunberg, Sweden
FF-010235: Liquid Cooled Permanent-Magnet Traction
considering Temporary Overloading
Konstantinos I. Laskaris, Antonios G. Kladas, Greece
Motor
design
TPC5-3 - Noise, vibration and high frequency effects
Room: Sormiou - Hour: 17:00-19:00
Co-chairs: Chandur Sadarangani, Hans Tischmacher
FF-000655: Vibration Monitoring for Wound Rotor Induction Machine Winding
Fault Detection
Sinisa Djurovic, Damian Vilchis-Rodriguez, Alexander Smith, United Kingdom
FF-007072: Experimental Investigation of the 3D Vibrational Behaviour of an
Induction Machine
Bernhard Weilharter, Oszkar Biro, Hermann Lang, Georg Ofner, Siegfried
Rainer, Austria
FF-010839: A comparative study of acoustic, vibration and stator current
capabilities for gear tooth fault diagnosis
Shahin Hedayati Kia, Humberto Henao, Gérard-André Capolino, France
FF-007811: High Frequency Equivalent Circuit Model of the Stator winding in
Electrical Machines
Sara Mahdavi, Kay Hameyer, Germany
FF-007293: Influence of Bearing Currents on the Bearing Lifetime for Converter
Driven Machines
Michael Kriese, Eike Wittek, Hans Tischmacher, Sven Gattermann, Bernd
Ponick, Gerhard Poll, Germany
FF-003085: Additional Harmonic Losses of Induction Motors by PWM Inverters:
Comparison between Result of Finite Element Method and IEC/TS 60034
Katsumi Yamazaki, Satoshi Kuramochi, Japan
TPC7-2 - Grid-connected and renewable energy applications 2
Room: Riou - Hour: 8:00-10:00
Co-chairs: H. Bulent Ertan, David Dorrell
FF-000329: Optimization of the Start-up Time of a Variable Speed PumpTurbine Unit in Pumping Mode
Yves Pannatier, Basile Kawkabani, Christophe Nicolet, Alexander Schwery,
Jean-Jacques Simond, Switzerland
FF-007498: High Altitude Wind Power Systems: A Survey on Power Kites
Mariam Ahmed, Ahmad Hably, Seddik Bacha, France
FF-006343: Maximising Output Power of Self-Excited Induction Generators for
Small Wind Turbines
Nicholas Batt, Colin Coates, Australia
FF-008907: Sizing and Topology of a small-scale Sustainable Wind Energy
Capture and Storage System
47
Hartmut Jagau, Mohamed Khan, Paul Barendse, South Africa
FF-011169: Real Time Marine Current Turbine Emulator: Design, Development
and Control Strategies
George Caraiman, Cristian Nichita, Brayima Dakyo, Viorel Minzu, Chul Hee Jo,
France/Romania/Korea
FF-007196: Development of Tools for DER Components in a Distribution
Network
Lucian Mihet-Popa, Cosmin Koch-Ciobotaru, Fridrik Isleifsson, Henrik Bindner,
Denmark/Romania
SS9-1 - Analytical models of electric machines and actuators 1
Room: Riou - Hour: 10:30-12:30
Co-chairs: Elena Lomonova, Georges Barakat
FF-003743: FEM2D Based Analytical Model of the Air Gap Magnetic Field in
Surface PM Synchronous Machines
Antonino Di Gerlando, Giovanni Foglia, Matteo Iacchetti, Italy
FF-002267: Accurate Analytical Computation of Magnetic Flux Density of
Spherical Permanent Magnet Arrays
B. van Ninhuijs, T.E. Motoasca, E.A. Lomonova, Netherlands
FF-003824: Analytical Investigation of Open-Circuit Eddy Current Loss in
Windings of PM Machines
L.J. Wu, Z.Q. Zhu, United Kingdom
FF-004669: Calculation of Radial Forces in Surface PM Motors with
Asymmetric Stator Windings
Nicolas Velly, Noureddine Takorabet, Babak Nahidmobarakeh, Farid MeibdyTabar, France
FF-005924: On Load Analytical Modelling of the Magnetic Field in Axial Flux
Surface-Inset Permanent Magnet Machines with Semi-Closed Slots
Adel Bellara, Huguette Tiegna, Yacine Amara, Georges Barakat, France
FF-007595: Rotor Losses for PMS Machines with Concentrated Windings
Ernest Matagne, Bruno Dehez, François Baudart, Belgium
SS9-2 - Analytical models of electric machines and actuators 2
Room: Riou - Hour: 14:00-16:00
Co-chairs: Yacine Amara, Johannes Paulides
FF-004162: Steady-State and Transient Parameter Computation for Wound
Field Synchronous Machines
Dingsheng Lin, Ping Zhou, Bo He, Nancy Lambert, USA
FF-006556: Exact special 2D spectral expression of the magnetic field in air
gap with skewed source
Ernest Matagne, Bruno Dehez, Kouider Ben-Naoum, Belgium
FF-006866: Analytical Computation of Flux Concentration PM Machines: Study
of the Influence of the Magnets Shape
48
Lamia Belguerras, Larbi Hadjout, Thierry Lubin, Smail Mezani, Abderrezak
Rezzoug, France
FF-007919: Modeling of a Finite, Rectangular, Conducting Plate in an Eddy
Current Damper
K.J.W. Pluk, B.L.J. Gysen, J.L.G. Janssen, E.A. Lomonova, J.W. Jansen,
Netherlands
FF-001732: 25 W linear PM oscillo-motor (PM-LOM): general and optimal
design, with FEM validation and controlled dynamics
Ion Boldea, Lucian Tutelea, Sorin-Cristian Agarlita, Cristofaro Pompermaier,
Irineu Setter, Romania/Brazil
FF-002771: Analytical Method for Predicting the Air-Gap Flux Density of DualRotor Permanent-Magnet (DRPM) Machine
Wei Xie, Gurakuq Dajaku, Dieter Gerling, Germany
TPC2-1 - Machines for special applications
Room: Riou - Hour: 17:00-19:00
Co-chairs: Haran Karmaker, Juha Pyrhonen
FF-000027: Stator Design Concepts for an 8 MW Direct Drive Superconducting
Wind Generator
Haran Karmaker, Edward Chen, William Chen, George Gao, USA
FF-005118: Design, comparison of two multi-disc permanent magnet motors for
aeronautical
Florian Dumas, Philippe Enrici, Daniel Matt, France
FF-008583: Design of an Eddy-Current Coupling for Slip-Synchronous
Permanent Magnet Wind Generators
Zac Mouton, Maarten Kamper, South Africa
FF-010723: Stator Winding Connection Mode Management in Line-Start
Permanent Magnet Motors to Improve their Efficiency and Power Factor
Fernando J. T. E. Ferreira, Anibal T. De Almeida, Ge Baoming, Portugal/China
FF-007773: Numerical modeling of an electromagnetic micro-motor using 3DFEM
Julien Moeneclaey, Abdelmounaim Tounzi, France
FF-007706: Linear Permanent Magnet Electric Generator for Free Piston
Engine Applications
Claudiu Oprea, Lorand Szabo, Claudia Martis, Romania
TPC6-2 - Embedded applications 2
Room: En Vau - Hour: 8:00-10:00
Co-chairs: Philippe Enrici, James Kirtley
FF-001058: Analytical determination of the orthotropic Material behavior of
stator bars in the range of the end windings and determination of the material
characteristics of the orthotropic composite space brackets via experimental
modal analysis and FE- calculation
49
Bernd Schlegl, Florian Schönleitner, Andreas Marn, Fritz Neumayer, Franz
Heitmeir, Austria
FF-003859: Ultracapacitor Storage for a 50t Capacity Gantry Crane
Augusto Di Napoli, Artan Ndokaj, Italy
FF-004936: An Integrated Split-Phase Dual-Inverter Permanent Magnet Motor
Drive and Battery Charger for Grid-Connected Electric or Hybrid Vehicles
Saeid Haghbin, Torbjörn Thiringer, Ola Carlson, Sweden
FF-003247: Performance Analysis of a Hybrid Dual Rotor Motor for Electric
Vehicle
Application
Mohammed Nasir Ansari, Amit Kumar Singh, Praveen Kumar, India
FF-010626: A Comparison between Soft Magnetic Cores for Axial Flux PM
Synchronous Machines
Roberto Di Stefano, Fabrizio Marignetti, Italy
FF-002003: Quasistatic piezomotor using resonant structures dedicated to
electroactive lubrication effect
Jean-François Rouchon, Céline Cénac-Morthé, Dominique Harribey, France
SS11 - Noise and vibrations in electrical machines
Room: En Vau - Hour: 10:30-12:30
Co-chairs: Michel Hecquet, Vincent Lanfranchi
FF-003786: Vibroacoustic simulation of an electric motor: methodology and
focus on the structural FEM representativity
Jean-Baptiste Dupont, Pascal Bouvet, Louis Humbert, France
FF-005827: Comparative Study of Vibration and Acoustic Noise between
Classical and Mutually Coupled Switched Reluctance Motors
Xiaobin Liang, Guangjin Li, Javier Ojeda, Mohamed Gabsi, Zhuoxiang Ren,
France
FF-006173: Modeling Spatial Harmonics and Switching Frequencies in PM
Synchronous Machines and their Electromagnetic Forces
Matthias Boesing, Markus Niessen, Tobias Lange, Rik De Doncker, Germany
FF-006963: Influence of the Inverter’s Modulation Technique on the Audible
Noise of Electric Motors
Ioannis Tsoumas, Hans Tischmacher, Germany
FF-008966: Material parameters for the structural dynamic simulation of
electrical machines
Michael van der Giet, Knut Kasper, Rik W. De Doncker, Kay Hameyer,
Germany
FF-009296: Characterisation of radial vibration force and electromagnetic noise
behaviour of a PWM-fed permanent magnet synchronous machine
Nicolas Bracikowski, France
SS4 - Condition monitoring for hybrid and electrical vehicles
Room: En Vau - Hour: 14:00-16:00
Co-chairs: Chiara Boccaletti, Antonio Marques Cardoso
50
FF-005169: A Voltage-Based Approach for Open-Circuit Fault Diagnosis in
Voltage-Fed SVM Motor Drives without Extra Hardware
Nuno Freire, Jorge Estima, António Cardoso, Portugal
FF-005215: Efficiency Evaluation of Fault-Tolerant Operating Strategies
Applied to Three-Phase Permanent Magnet Synchronous Motor Drives
Jorge Estima, A. J. Marques Cardoso, Portugal
FF-009032: Development of an On-Board Unit for the Monitoring and
Management of an Electric Fleet
Gianluca Fabbri, Fabiana Calenne, Marco London, Chiara Boccaletti, Antonio
Cardoso, Fabio Mascioli, Italy/Portugal
FF-011312: Analysis of Demagnetization Faults in Surface-Mounted Permanent
Magnet Synchronous with Inter-turns and Phase-to-Ground Short-Circuits
Julio Urresty, Jordi Riba, Luis Romeral, Harold Saavedra, Spain
FF-011363: Demagnetizations diagnosis for permanent magnet synchronous
motors based on advanced wavelet analysis
Yasser Gritli, Claudio Rossi, Domenico Casadei, Luca Zarri, Fiorenzo Filippetti,
Italy
FF-011584: Real-time Demagnetization Assessment of PM Synchronous
Machine
Ali Sarikhani, Osama Mohammed, USA
SS2 - Energy conservation in transformers and related practices
Room: En Vau - Hour: 17:00-19:00
Co-chairs: Georgios Loizos, Xose Lopez-Fernandez
FF-000973: A Dual-Topology ICPT Applied to an Electric Vehicle Battery
Charger
Christophe Auvigne, Paolo Germano, Yves Perriard, Switzerland
FF-006246: Experimental Validation of a New Methodology to Reduce Hot
Spots on the Screws of Power Transformer Tanks
Juan Carlos Olivares-Galván, Salvador Magdaleno-Adame, Rafael EscarelaPerez, Rodrigo Ocon-Valdez, Pavlos Georgilakis, George Loizos,
Mexico/Greece
FF-007994: Modeling and Dimensioning of High Voltage Pulse Transformers
for Klystron Modulators
Philippe Viarouge, Davide Aguglia, Carlos Martins, Jérôme Cros,
Canada/Switzerland
FF-009199: Design Optimization of High Frequency Transformer for Dual
Active Bridge DC-DC Converter
Khoa Dang Hoang, Jiabin Wang, United Kingdom
FF-011827: Transformer Tertiary Stabilizing Windings. Part I: Apparent Power
Rating
Patricia Penabad-Duran, Xose M. Lopez-Fernandez, Casimiro Alvarez-Mariño,
Spain
51
FF-011843: Transformer Tertiary Stabilizing Windings. Part II: Overheating
Hazard on Tank Walls
Patricia Penabad-Duran, Casimiro Alvarez-Mariño, Xose M. Lopez-Fernandez,
Spain
TPC2-2 - Magnetic gears and linear machines
Room: Sugiton - Hour: 8:00-10:00
Co-chairs: Sheppard Salon, Mounaim Tounzi
FF-000744: Contactless power supply for magnetically levitated elevator
systems
Rüdiger Appunn, Björn Riemer, Kay Hameyer, Germany
FF-000957: Torque Ripple Analysis of a Magnetic-Geared Motor
Noboru Niguchi, Katsuhiro Hirata, Japan
FF-006602: Independently Controllable Electromagnetic Spherical Actuator
Shuhei Maeda, Katsuhiro Hirata, Noboru Niguchi, Japan
FF-007285: Design of a Magnetic Lead Screw for Wave Energy Conversion
Rasmus Koldborg Holm, Nick Ilsoe Berg, Morten Walkusch, Peter Omand
Rasmussen, Rico Hjerm Hansen, Denmark
FF-008419: A Linear Magnetic Gear
Robert C. Holehouse, Kais Atallah, Jiabin Wang, United Kingdom
FF-011983: A High Absolute Thrust Permanent Magnet Linear Actuator for
Direct Drive of Ship's Steering Gears: Concept and FEM Analysis
Claudio Bruzzese, Italy
SS5 - Modeling and control of high speed motors
Room: Sugiton - Hour: 10:30-12:30
Co-chairs: Fabio Giulli Caponi, Martin Novak
FF-005207: Performance characteristics of a high-speed energy-saving
induction motor with an amorphous stator core
Maria Dems, Krzysztof Komeza, Poland
FF-005894: Modeling and optimal control of a hybrid excitation synchronous
machine by Combining Analytical and Finite Element Models
Abdeljalil Daanoune, Albert Foggia, Lauric Garbuio, Jean-Claude Mipo, Li Li,
France
FF-006645: Modeling and Comparison of Machine and Converter Losses for
PWM and PAM in High-Speed Drives
Lukas Schwager, Arda Tuysuz, Christof Zwyssig, Johann W. Kolar, Switzerland
FF-007455: A Complex Frequency Domain Analysis of a Closed Loop
Controlled Pseudo Direct Drive
Mohammed Bouheraoua, Jiabin Wang, Kais Atallah, United Kingdom
FF-007781: Experimental Verification of High-Speed Permanent Magnet
Synchronous Motor Model
Martin Novak, Jaroslav Novak, Jan Chysky, Czech Republic
52
FF-011258: Vector control of very-high-speed PM machines
Aleksandar Borisavljevic, Maikel Brands, Elena Lomonova, Netherlands
SS1 - Recent advancements in sensorless control of electrical machines
Room: Sugiton - Hour: 14:00-16:00
Co-chairs: Frederik De Belie, Jan Melkebeek
FF-000205: Saliency Investigation of Switched-Flux PM Brushless AC Machine
for Saliency-Tracking-Based Sensorless Control
T.C. Lin, L.M. Gong, Z.Q. Zhu, United Kingdom
FF-004944: On-line Parameter Estimation for Improved Sensorless Control of
Synchronous Motors
Omar Scaglione, Miroslav Markovic, Yves Perriard, Switzerland
FF-008915: Improved Rotor Position Estimation of Salient PMSM Using High
Frequency Carrier Signal Injection
Ouiza Mansouri-Toudert, H Zeroug, François Auger, Arezki Chibah,
Algeria/France
FF-011274: Small-Signal Finite-Element Modeling of Synchronous Machines
for Sensorless Applications
Luigi Alberti, Johan Gyselinck, Nicola Bianchi, Mattia Morandin, Silverio
Bolognani, Italy/Blegium
FF-009407: A Full-Sensorless Permanent Magnet Synchronous Motor Drive
with an Enhanced Phase-Locked Loop Scheme
Carlo Olivieri, Marco Tursini, Francesco Parasiliti, Italy
FF-010006: Sensorless Position Estimation of Permanent-Magnet Synchronous
Motors Using a Nonlinear Magnetic Saturation Model
Al Kassem Jebai, François Malrait, Philippe Martin, Pierre Rouchon, France
SS6 - Application and optimization of modern signal processing tools in
electrical machines
Room: Sugiton - Hour: 17:00-19:00
Co-chairs: Jose A. Antonino-Daviu, Martin Riera-Guasp
FF-002593: Smart Sensor for Electrical Machine Monitoring through Statistical
Analysis
Eduardo Cabal-Yepez, Arturo A. Fernandez-Jaramillo, Rene J. RomeroTroncoso, Arturo Garcia-Perez, Roque A. Osornio-Rios, Mexico
FF-003735: A Novel Condition Monitoring Scheme for Bearing Faults based on
Curvilinear Component Analysis and Hierarchical Neural Networks
Miguel Delgado, Giansalvo Cirrincione, Antoni García, Juan Antonio Ortega,
Humberto Henao, Spain/France
FF-005231: Rotor Fault Diagnosis in Asynchronous Machines via Analysis of
the Start-Up Transient into Intrinsic Mode Functions
George
Georgoulas,
Ioannis
Tsoumas,
Epaminondas
Mitronikas,
Chrysostomos Stylios, Athanasios Safacas, Greece
53
FF-006777: Vibration Transient Detection of Broken Bars by PSH Sidebands
Vicente Climente-Alarcon, Jose Alfonso Antonino-Daviu, Francisco VedreñoSantos, Ruben Puche-Panadero, Spain
FF-06998: Neural network broken bar detection using time domain and current
spectrum data
Pedro Esteban Gardel Sotomayor, Daniel Moríñigo-Sotelo, Oscar DuquePerez, Marcelo Perez-Alonso, Luis A. Garcia-Escudero, Spain
FF-011207: Inter Turn Short Circuit Detection at Higher Modulation Indexes
Including Six Step Operation
Goran Stojcic, Gojko Joksimovic, Mario Vasak, Nedjeljko Peric, Thomas
Wolbank, Austria/Montenegro/Croatia
54
Exhibitors
Booth Number
1
2
3
4
5
6
7
8
9
10
Company Name
CEDRAT - France
CST - France
Kienle + Spiess GmbH - Germany
Infolytica Europe - United Kingdom
Cobham Technical Services - United Kingdom
Vesta System - France
Motor Engineer SARL - France
Université de Picardie « Jules Verne » - LTI/EESA - France
JMAG Software - France
Advanced MotorTech LLC - USA
55
56