7
DEMOLITION
1
CONSTRUCTION – GENERAL CONSTRUCTION
2
CONSTRUCTION – QUICK HITCHES & BUCKETS
3
CONSTRUCTION – TILTROTATORS
4
CONSTRUCTION – LANDSCAPING & SNOW REMOVAL
5
CONSTRUCTION – UTILITIES, OIL & GAS
6
SCRAP PROCESSING
7
DEMOLITION
8
MATERIAL HANDLING
9
RAILWAY
10
CUSTOM UNITS
2015
We reserve the right to amend specifications without prior notice. Kinshofer GmbH, 83666 Waakirchen, Germany
kinshofer
Worldwide
What has now become a worldwide operating company once started in a small
garage in the Bavarian uplands. Innovation and quality have made
the company what it is today: a global player in the construction industry.
Kinshofer can count on a range of subsidiaries and sales offices
worldwide to promote its products.
Kinshofer GmbH
DEMAREC B.V.
THE NETHERLANDS
2006
Headquarters Marienstein,
GERMANY
1971
RF-System AB
SWEDEN
2011
Kinshofer UK
UNITED KINGDOM
1984
Kinshofer North America
CANADA
2000
Kinshofer France S.A.R.L.
FRANCE
1986
Kinshofer USA
UNITED STATES OF AMERICA
2013
Kinshofer Aponox Oy
FINLAND
2009
Darda Kinshofer
Construction Machinery Co. Ltd.
PR CHINA
2008
A History of Quality and Success
For more than 40 years we have specialized in the development and construction
of quality attachments for cranes and excavators. Within the industry, our
name has become synonymous for innovation, quality and reliability!
ALWAYS IN MIND – OUR CLIENT‘S NEEDS
KINSHOFER GmbH is one of the leading manufacturers of attachments for loader cranes and hydraulic excavators, as well as for
rotators, Tiltrotators and rotary actuators. The headquarters of the medium-sized company is located in the Bavarian village
Waakirchen/Marienstein, Germany.
Originally named KINSHOFER Maschinenbau Miesbach, the company was founded by Alfred Kinshofer on August 4, 1971 in Miesbach,
Bavaria, Germany.
At the beginning the small business only produced bridge bearings, handrails and accessories for brick factories, such as tunnel kiln
trucks or lifting and lowering devices for tile presses.
Two years after the company‘s founding, the development of the first brick stack grapple began. Just one year later, the construction of a
pallet fork and a clamshell bucket followed. As the capacities of the original factory had been exhausted, a new plant was built in eastern
Miesbach in 1975.
Only two years later, this building had grown too small again, so a second building was constructed with additional office buildings.
In 1979, the company‘s first rotator with 360° endless rotation was developed.
The company changed its name to KINSHOFER Greiftechnik GmbH in 1980, and the first sales activities in the United States and the UK
took place.
In 1984, the first foreign sales subsidiary of the company was founded in Stockport, Cheshire, England: KINSHOFER UK Ltd.
Alfred Kinshofer sold his shares in 1987, but kept being a worthy consultant for the company. The same year, KINSHOFER France was
founded in Strasbourg, France.
Planning began in 1997 for factories in the Austrian village of Gmünd and the Czech České Velenice, and one year later MARS
Greiftechnik was founded and production started.
In the year 2000, KINSHOFER made the step overseas and acquired the Canadian company Liftall which was to become the subsidiary
KINSHOFER North America.
A major milestone for KINSHOFER occurred in 2003: the development of the patented HPXdrive that bestowed the if-Silver Award
for ”Product Design“ in the ”Industry“ branch upon the company.
In 2006, the company finally got its current name: KINSHOFER GmbH. The same year, the Dutch specialist for demolition and recycling
tools Demarec B.V. was acquired.
The worldwide operating Swedish company Lifco AB acquired KINSHOFER GmbH in 2007.
Another logical consequence was the expansion to the east, and so the company Darda KINSHOFER Construction Machinery Co. Ltd.
was founded in 2008 in the Chinese capital of Beijing.
The same year marks the foundation of KINSHOFER Aponox Oy in Hämeenlinna, Finland with the main focus on NOX Tiltrotators.
As the year 2011 came to an end, KINSHOFER acquired the Swedish company RF-System AB, as well as the intellectual property
and distribution rights of New Zealand‘s Wedgelock Equipment Ltd. at the beginning of 2012, further broadening the available
product range.
In 2013, the new KINSHOFER US factory opened in Sanborn in the state of New York.
KINSHOFER counts on a high vertical integration. The products are designed in the proper development department, constructed and
finally tested in the in-house test laboratory. Thus the company retains control not only over the production, but also the product itself.
Constant communication and information exchange between the company and its clients results in further developments and
innovations that keep the company close to the customer.
In the Action Park at the company‘s headquarters, there is also the possibility for dealers and clients to take part in training and tool
demonstrations.
Always close to the client – up front, everywhere ...
THERE IS NO ALTERNATIVE TO QUALITY
Many Applications - One S
Over 40 years of experience as well as involvement w
with the latest engineering tools, have led to K
 Landscaping / Snow Removal
 Road Construction
 Civil Engineering
 Utilities
 Scrap Metal
 Scrap Tires
 Scrap Rails
 Primary Demolition
 Secondary Demolition
 Steel
Within the range of attachments for
construction, you can find different and versatile
tools made by KINSHOFER for tasks from
landscaping to road construction.
Buckets and Clamshell buckets for different operating weights and in different widths, suitable
adapters and quick hitches are part of the product
range as well as smaller demolition and sorting
grabs, multi purpose grabs, rock grabs, augers
and brushes for dirt and snow removal.
Innovations not missed are the unique cylinderless
nox Tiltrotator, the revolutionary HPXdrive –
no hoses, no hydraulic cylinders, easy shell exchange and absolutely maintenance-free – or the
C-VE series with its fast shell exchange system!
Scrap processing has become an increasingly
important concern throughout the world.
Scrap metal has to be cut, broken, handled,
separated, processed and recycled, similar to
plastic, glass, and tires.
Rail scrap processing is just one important part
of the large scrap industry.
At KINSHOFER you will find the perfect
tool for your task, no matter if you want to cut
beams, rails, tires, containers, tanks or entire
ships!
Entrust KINSHOFER with your scrap
processing task – we will find the perfect
solution for you!
No matter if demolishing, breaking,
comminuting or separating – with
attachments for demolition and recycling
you will always have the perfect tool.
With attachments for a broad scope of machines,
reaching from demolition grabs for lighter weight
excavators up to dedicated shears for excavators
of up to 80t operating weight – the perfect solution for each weight and task is available.
Innovations do not fall short: the MQP with
its strong power thanks to the
, making the
cylinder, or the
exchange of jaws possible within only a few
minutes on site!
Solution: kinshofer
with en d users in the development process, combined
KINSHOFER‘s comprehensive product range.
 Waste
 Bulk Material & Dry Cargo
 Timber
 Rail Track Construction
 Rail Track Maintenance
 Scrap Rails
 Construction
 Off-Shore
 Nuclear
 Pipeline / Geothermal
It makes no difference whether you are loading
or discharging boat or train carriages, handling
scrap or wood or performing demolition tasks
– within the KINSHOFER range »Material
Handling« you are sure to find the optimal tool.
Excavators from 11t to 80t operating weight can
be equipped.
Orange peel grabs with different capacities and
designs are part of the available tools as well as
demolition and sorting grabs, re-handling
clamshell buckets or timber grabs.
Outstanding: the extraordinary C80H re-handling clamshell bucket with the incredible volume
of 5000 litres!
There is hardly another invention that has
changed the transport system as much as
the railway. Railroads have, and continue,
to play a large role in the way people and
products are transported around the world.
It is vital that railways are kept operational
and safe.
No matter if it is about the construction,
maintenance or demolition of railroad tracks:
the KINSHOFER range meets every
demand, ranging from sleeper layers and
ballast tampers to large mobile rail cutters.
Find everything you need and more in one
single company!
As the tasks to be accomplished are becoming
more and more complex, the requirements to
be met increase accordingly. Many times, no
standard tool can meet to solve clients‘ demands
and thus, only a custom-made product can solve
the problem.
Our existing products for custom and special
solutions range from tools for off-shore
operations, nuclear tasks to geothermal applications.
You have a certain problem on hand
requiring a special solution?
KINSHOFER will find the perfect answer
for you and your task!
Demolition...
... includes primary and secondary demolition, as well
as the sorting and recycling of the demolished material.
No matter the task, KINSHOFER provides the ideal tool.
As empty building sites become less each day and the recycling of the building materials becomes more and more important,
the demand on more specialised, faster and better tools for the primary and the secondary demolition rise accordingly.
KINSHOFER and DEMAREC, the latter being the Dutch specialist for demolition tools, provide the ideal tools
for your demolition task. The demolition of e.g. buildings, ships or airplanes, the pulverising of concrete constructions, the separation
and cutting of concrete reinforcements and the breaking of steel beams - all this and more is no problem for the KINSHOFER and DEMAREC
attachments for demolition and your task can be realised in a fast and economic way.
For primary and
secondary
demolition:
The DRP
Rotating
Pulverizer
The DRS Mobile Shear is the ideal tool
to break industrial and mixed scrap
Due to the exchangeable jaws
extremely versatile: The MQP Multi-Quick
Processor, here with Combi Jaws
The DSP Static Pulverizer is available as
Standard or stronger Extreme version
The ideal
partner on
every scrap
yard:
The DRS
Mobile Shear
Ideal for sorting and demolition:
The D H-P-series for excavators
with up to 80t operating weight
With six types of exchangeable
jaws a universal shredder:
The MQP Multi-Quick Processor –
here with steel jaws
The DRC 520 is
the optimum
tool for indoordemolition tasks
6
Unbeatable for
the demolition
of wooden
constructions: D20HT 5-Finger
Timber Grab
We reserve the right to amend specifications without prior notice. Kinshofer GmbH, 83666 Waakirchen, Germany
Contents
Summary Listed by Operating Weight of Excavator
8
PremiumLine
9
Demolition and Sorting Grabs
up to 2t / 4400 lbs operating weight with horizontal cylinders: D02H
12
up to 6t / 13200 lbs operating weight with HPXdrive : D03HPX / D05HPX
13
up to 9t / 19800 lbs operating weight with HPXdrive : D09HPX
14
up to 27t / 59400 lbs operating weight with horizontal cylinder: D15H/D20H/D27H with metal rlbs
15
up to 27t / 59400 lbs operating weight with horizontal cylinder: D12H-P / D15H-P / D20H-P / D27H-P with perforated shells
16
up to 80t /176000 lbs operating weight Heavy Duty with horizontal cylinder: D15H-P-75HD / D16H-P-90HD / D19H-P-85HD /
D20H-P100HD / D24H-P100HD / D32H-P-110HD / D40H-P-125HD /
D50H-P-140HD / D70H-P-150HD with perforated shells
17
5-Finger Timber Grab
up to 27t / 59400 lbs operating weight with horizontal cylinder: D15H-T/D20H-T/D27H-T
18
Concrete Crusher
up to 7t / 15400 lbs operating weight: DRC 520
19
Static Pulverisers
20
20
20
Contractor Grabs
up to 54t / 118800 lbs operating weight, Contractor Grapple: CG
21
Rotating Combi Shears / Demolition Shears / Pulverisers
up to 25t / 55000 lbs operating weight, Combi Shear: DLC-25
up to 35t / 77000 lbs operating weight, Combi Shear: DLC-30
up to 50t / 110000 lbs operating weight, Combi Shear: DLC-45
22
22
22
up to 25t / 55000 lbs operating weight, Demolition Shear: DLD-25
up to 35t / 77000 lbs operating weight, Demolition Shear: DLD-30
up to 50t / 110000 lbs operating weight, Demolition Shear: DLD-45
22
22
22
up to 25t / 55000 lbs operating weight, Pulveriser: DLP-25
up to 35t / 77000 lbs operating weight, Pulveriser: DLP-30
up to 50t / 110000 lbs operating weight, Pulveriser: DLP-45
up to 65t / 143000 lbs operating weight, Pulveriser: DLP-60
22
22
22
22
Rotating Combi Shears / Demolition Shears / Pulverisers with DemaPower
up to 25t / 55000 lbs operating weight, Combi Shear with DemaPower: DRC-25
up to 35t / 77000 lbs operating weight, Combi Shear with DemaPower: DRC-30
up to 50t / 110000 lbs operating weight, Combi Shear with DemaPower: DRC-45
23
23
23
up to 25t / 55000 lbs operating weight, Demolition Shear with DemaPower: DRD-25
up to 35t / 77000 lbs operating weight, Demolition Shear with DemaPower: DRD-30
up to 50t / 110000 lbs operating weight, Demolition Shear with DemaPower: DRD-45
23
23
23
up to 25t / 55000 lbs operating weight, Pulveriser with DemaPower: DRP-25
up to 35t / 77000 lbs operating weight, Pulveriser with DemaPower: DRP-30
up to 50t / 110000 lbsoperating weight, Pulveriser with DemaPower: DRP-45
up to 65t / 143000 lbs operating weight, Pulveriser with DemaPower: DRP-60
23
23
23
23
Multi-Quick Processors for Demolition, Cutting & Separating with DemaPower
up to 25t / 55000 lbs operating weight: MQP-25 with DemaPower, five optional jaws
up to 35t / 77000 lbs operating weight: MQP-30 with DemaPower, six optional jaws
up to 50t / 110000 lbs operating weight: MQP-45 with DemaPower, six optional jaws
up to 65t / 143000 lbs operating weight: MQP-60 with DemaPower, six optional jaws
24
25
25
25
25
Mobile Shears
up to 30t / 66000 lbs operating weight, Mobile Shear with 360° Rotation: DRS-25-A
26
up to 35t / 77000 lbs operating weight, Mobile Shear with 360° Rotation: DRS-30-A
26
up to 50t / 110000 lbs operating weight, Mobile Shear with 360° Rotation: DRS-45-A
26
up to 65t / 143000 lbs operating weight, Mobile Shear with 360° Rotation: DRS-60-A
26
up to 50t / 110000 lbs operating weight, Mobile Shear with 360° Rotation: DRS-60-B
26
up to 35t / 77000 lbs operating weight, Mobile Shear with 360° Rotation: DRS-60-C
26
up to 80t / 176000 lbs operating weight, Mobile Shear with 360° Rotation: DRS-75-A
26
up to 65t / 143000 lbs operating weight, Mobile Shear with 360° Rotation: DRS-75-B
26
up to 50t / 110000 lbs operating weight, Mobile Shear with 360° Rotation: DRS-75-C
26
up to 100t / 220000 lbs operating weight, Mobile Shear with 360° Rotation: DRS-90-A
up to 80t / 176000 lbs operating weight, Mobile Shear with 360° Rotation: DRS-90-B
26
26
up to 70t / 154000 lbs operating weight, Mobile Shear with 360° Rotation: DRS-90-C
26
­­ —> Further information about KINSHOFER products can be found on our web site www.kinshofer.com
We reserve the right to amend specifications without prior notice. Kinshofer GmbH, 83666 Waakirchen, Germany
7
Catalog effective January 2015
up to 35t / 77000 lbs operating weight: DSP-30 / DSP-30Extreme
up to 50t / 110000 lbs operating weight: DSP-45 / DSP-45Extreme
up to 65t / 143000 lbs operating weight: DSP-60 / DSP-60Extreme
Summary Listed by Operating Weight of Excavator
Type
Operating Weight of Excavator (t / lbs)
Demolition and Sorting Grabs
1
2
3 5 6
2200 4400
D02H
6600
D03HPX
6600 13200
D05HPX
11000
D09HPX
D12H-P
D15H
D15H-P
D15H-P HD
D16H-P HD
D19H-P HD
D20H-P HD
D20H
D20H-P
D24H-P HD
D27H
D27H-P
D32H-P HD
D40H-P HD
D50H-P HD
D70H-P HD
5-Finger Timber Grab
1
2
3
5
D15H-T
D20H-T
D27H-T
Concrete Crusher
2
4
5
8800 11000
DRC 520
8
9
10
11
17600 19800
17600 19800 22000 24200
24200
24200
22000 24200
8
9
10
6
7
10
13200 15400
12
26400
26400
26400
26400
26400
26400
13
14
15
28600
28600
28600
28600
28600
28600
30800
30800
30800
30800
30800
30800
30800
30800
33000
33000
33000
33000
33000
33000
33000
33000
33000
10
DSP-30
DSP-30Extr.
DSP-45Extr.
DSP-60
DSP-60Extr.
Mobile Shears
10
10
DRS-25-A
DRS-30-A
DRS-45-A
DRS-60-A
DRS-60-B
DRS-60-C
DRS-75-A
DRS-75-B
DRS-75-C
DRS-90-A
DRS-90-B
DRS-90-C
Contractor Grabs
CG 40
CG 50
CG 70
CG 100
20
11
11
11
12
12
12
13
13
13
14
14
14
30800
15
15
15
33000
18
39600
18
18
39600
39600
39600
39600
39600
39600
39600
39600
39600
39600
39600
25
27
44000
44000
44000
44000
44000
44000
44000
44000
44000
52800
52800
52800
52800
55000
55000
55000
55000
55000
25
13
14
15
18
20
24
11
12
13
14
15
18
20
24
20
44000
20
44000
44000
20
44000
44000
22
48400
48400
22
48400
48400
22
48400
48400
25
55000
55000
25
55000
55000
25
55000
55000
55000
60
70
80 100
27
30
40
50
60
70
80 100
32
35
40
…
66000
70400
70400
77000
77000
88000
...
99000 110000
66000
70400
70400
77000
77000
88000
...
99000 110000
70400
70400
77000
77000
88000
...
99000 110000
99000 110000 132000 143000
30
32
35
40
…
66000
70400
70400
77000
77000
88000
...
99000 110000
66000
70400
70400
77000
77000
88000
...
99000 110000
66000
70400
70400
77000
77000
88000
...
99000 110000
99000 110000 132000 143000
32
35
40
…
70400
70400
77000
77000
88000
...
35
...
30
45
45
45
50
50
50
60
60
60
65
65
65
70400
70400
70400
77000
77000
77000
40
42
88000
92400
92400
92400
30
32
35
40
…
70400
70400
70400
70400
70400
77000
77000
77000
77000
77000
77000
77000
77000
88000
88000
88000
...
...
...
99000 110000
99000 110000 132000 143000
99000 110000
88000
88000
88000
...
...
...
88000
...
99000
99000
99000
99000
99000
99000
110000
110000
110000
110000
110000
110000
70400
70
80
100
70
80
100
70
80
100
70
80
99000 110000
99000 110000 132000 143000
66000
66000
66000
66000
66000
66000
66000
66000
66000
32
80 100
50
30
66000
70
40
30
...
...
...
60
30
66000
…
50
27
...
...
...
40
59400 66000
59400
59400
59400 66000 88000
59400 66000 88000 110000
88000 110000 132000
110000 132000 154000 176000
…
…
30
52800
52800 55000
12
66000
21
24
11
55000
44000 46200
46200
20
24200 26400 28600 30800 33000
30800 33000 39600 44000
39600 44000 52800 55000 29400
Rotating Combi Shears / Demolition Shears / Pulverisers
10 11 12 13 14 15 18 20 22 25 …
39600 44000 48400 55000
DLC-25
48400 55000
...
DLC-30
DLC-45
39600
44000
48400
55000
DLD-25
48400 55000
...
DLD-30
DLD-45
39600 44000 48400 55000
DLP-25
48400 55000
...
DLP-30
DLP-45
DLP-60
Rotating Combi Shears / Demolition Shears / Pulverisers with DemaPower
10 11 12 13 14 15 18 20 22 25 …
39600 44000 48400 55000
DRC-25
48400 55000
...
DRC-30
DRC-45
39600 44000 48400 55000
DRD-25
48400 55000
...
DRD-30
DRD-45
39600
44000
48400
55000
DRP-25
48400 55000
...
DRP-30
DRP-45
DRP-60
Multi-Quick Processors with DemaPower
MQP-25
MQP-30
MQP-45
MQP-60
Static Pulverisers
18
45
50
60
65
99000 110000
99000 110000 132000 143000 154000
99000 110000 132000 143000
45
50
60
65
70
80
100
132000 143000 154000 176000
132000 143000
132000 143000 154000 176000 220000
132000 143000 154000 176000
132000 143000 154000
25
26
27
28
29
30
…
35
36
37
38
39
40
…
45
…
48
…
50
…
54
55000
57200
59400
61600
63800
63800
66000
...
77000
79200
81400
83600
85800
88000
88000
...
99000
...
105600
...
110000
...
118800
Legend:
8
horizontal cylinder (H = horizontal)
HPXdrive
DemaPower
others
We reserve the right to amend specifications without prior notice. Kinshofer GmbH, 83666 Waakirchen, Germany



D
E
E
T
N
A
Top Products now with Shorter Delivery Time
R
A
GU Packages
Ready-to-Mount and Optimally Adapted Complete
Professional Tools for Professional Users
Multi-Quick Processors
page
MQP-25 Multi-Quick Processor
complete package with rotation and bolt-on adapter
MQP-30 Multi-Quick Processor
complete package with rotation and bolt-on adapter
MQP-45 Multi-Quick Processor
complete package with rotation and bolt-on adapter
25
25
25
Mobile Shears
DRS-30-A Mobile shear
complete package with rotation and bolt-on adapter
DRS-45-A Mobile shear
complete package with rotation and bolt-on adapter
DRS-60-A Mobile shear
complete package with rotation and bolt-on adapter
DRS-75-A Mobile shear
complete package with rotation
and bolt-on adapter
We reserve the right to amend specifications without prior notice. Kinshofer GmbH, 83666 Waakirchen, Germany
26
26
26
26
9
Demolition and Sorting Grabs with HPXdrive
D05HPX-50 Demolition and sorting grab
complete package with rotator, exchangeable cutting edges
and non-return valve
D09HPX-60 Demolition and sorting grab
complete package with rotator, exchangeable cutting edges
and non-return valve
10
page
13
14
We reserve the right to amend specifications without prior notice. Kinshofer GmbH, 83666 Waakirchen, Germany
D
E
E
 Top Products now with Shorter Delivery Time ANT
 Ready-to-Mount and Optimally AdaptedUComplete
AR Packages
G
 Professional Tools for Professional Users
Heavy Duty Demolition and Sorting Grabs
D15H-P-75HD Heavy duty demolition and sorting grab
complete package with integrated rotation, exchangeable cutting edges
and non-return valve
D16H-P-90HD Heavy duty demolition and sorting grab
complete package with integrated rotation, exchangeable cutting edges
and non-return valve
page
17
17
D19H-P-85HD Heavy duty demolition and sorting grab
complete package with integrated rotation, exchangeable cutting edges
and non-return valve
D20H-P-100HD Heavy duty demolition and sorting grab
complete package with integrated rotation, exchangeable cutting edges
and non-return valve
D24H-P-100HD Heavy duty demolition and sorting grab
complete package with integrated rotation, exchangeable cutting edges
and non-return valve
17
17
17
D32H-P-110HD Heavy duty demolition and sorting grab
complete package with integrated rotation, exchangeable cutting edges
and non-return valve
D40H-P-125HD Heavy duty demolition and
sorting grab
complete package with integrated rotation (2 motors),
exchangeable cutting edges and non-return valve
We reserve the right to amend specifications without prior notice. Kinshofer GmbH, 83666 Waakirchen, Germany
17
17
11
1t
2t
3t
4t
5t
6t
7t
D02H
8t
9t
10 t
11 t
12 t
Demolition and Sorting Grab
Demolition and sorting grab for excavators with 1t / 2200 lbs to
2t / 4400 lbs operating weight – the universal tool for lighter demolition
and sorting tasks of all kinds.
l Perforated skin of shells lets dust and gravel through.
l Extremely robust due to the use of cutting edge material 500 HB steel.
lCutting edges usable both sides.
l Integrated non-return valve guarantees secure retention of loads.
lPrecise positioning through mounted rotator with endless rotation.
l
High closing force achieved by horizontal cylinder (20 kN / 4400 lbf
at 200 bar / 2880 psi operating pressure).
Demolition and Sorting Grab D02H
Type
Width
E
(mm/in)
300 / 11.81
D02H
Package consists of:
Opening
A
(mm/in)
790 / 31.10
Height
C max.
(mm/in)
770 / 30.31
Volume
Self weight
Closing force
(litre/c.y.)
35 / 0.05
(kg/lbs)
115 / 253
(kN/lbf )
20 / 4400
Operating
weight
(t/lbs)
1 - 2 / 2200 - 4400
demolition and sorting grab, KINSHOFER rotator, non-return valve, cutting edges
KINSHOFER Rotator
Continuous rotation and two oil passages. Overload protection is ensured by pressure relief valves.
Type
Upper connection
Torque
(bores/Ø-hole pattern)
(mm/in)
(Nm/ft.lbs)
KM 04 F140/150
10 x M 12 / Ø 150/5.91
850 / 630
Moment of deflection
max.
(Nm/ft.lbs)
3000 / 2215
Accessories
Type
Description
KM 691 2t
KM 690 2t
SW01 rigid
adapter connection plate for specific solutions – up to 2t / 4400 lbs
adapter for rigid mounting – up to 2t / 4400 lbs
bolt-on adapter for Lehnhoff grab exchange systemSW/MS01 with SW01 – up to 2t / 4400 lbs
adapter for quick exchange systems from other manufacturers available
Requirements of Excavator
Operating pressure (open/close):
Recommended oil flow (open/close):
Operating pressure (rotation):
Recommended oil flow (rotation):
max. 20 MPa (200 bar) / 2880 psi
10 - max. 40 l/min / 2.64 - max. 10.57 GPM
max. 32 MPa (320 bar) / 4608 psi
15 - max. 50 l/min / 3.96 - max. 13.21 GPM
Cmax
Technical Drawings
A
12
E
We reserve the right to amend specifications without prior notice. Kinshofer GmbH, 83666 Waakirchen, Germany
1t
2t
3t
4t
5t
6t
7t
8t
9t
Demolition and sorting grab with the maintenance-free HPXdrive for
excavators up to 3t / 6600 lbs or 6t / 13200 lbs operating weight –
the universal tool for all kind of light demolition and sorting work.
lHPXdrive – the revolutionary concept for hydraulically operated grabs!
The rotation of the arms of the grab is generated by two hollow shafts,
which run opposed and have a helix thread, hydraulically driven by a
single piston. No hydraulic cylinder required!
l50% longer life cycle. The drive unit runs in a permanent oil bath –
no lubrication necessary. Resistant against dirt and blows, due
to the compact design.
lConstant closing forces during the entire operation.
lDifferent applications possible through easy exchange system.
lThe perforated skin of the shells lets fine dust and gravel through –
without larger pieces blocking the shell filter system.
lIntegrated non-return valve guarantees secure retention of the loads.
lLong life is ensured due to the use of 500 HB steel in the manufacture
of cutting edges (usable both sides).
E
(mm/in)
400 / 15.75
500 / 19.69
D03HPX-40
D05HPX-50
Package consists of:
A
(mm/in)
975 / 38.39
1135 / 44.69
11 t
12 t
D03HPX / D05HPX
Demolition and Sorting Grabs with HPXdrive
Demolition and Sorting Grabs D03HPX / D05HPX
Type
Width
Opening
10 t
D03HPX
Height
Volume
C max.
(mm/in)
820 / 32.28
920 / 36.22
Self
weight
Load
capacity
(litre/c.y.)
60 / 15.85
100 / 26.42
(kg/lbs)
295 / 649
300 / 660
(kg/lbs)
1000 / 2200
1000 / 2200
Closing
force
Operating
weight
(kN/ft.lbs)
(t/lbs)
26 / 5720
3 / 6600
24 / 5280 3 - 6 / 6600 - 13200
demolition and sorting grab, KINSHOFER rotator, non-return valve, cutting edges
KINSHOFER Rotators
Integrated in a single unit with the HPXdrive, no more connecting hoses. Continous rotation. Overload protection ensured by pressure relief valves.
Type
D03HPX: KM 06 F173/180
D05HPX: KM 10 F173/180
Upper connection
(width/Ø-hole pattern)
(mm/in)
6 x M16 / Ø 180/7.09
6 x M16 / Ø 180/7.09
Torque
(Nm/ft.lbs)
1000 / 740
2000 / 1475
Moment of deflection
max.
(Nm/ft.lbf )
8500 / 6270
12000 / 8850
Accessories
Type
Description
KM 691 8t
KM 690 8t
OQ45
SW03 rigid
adapter connection plate for specific solutions – up to 8t / 17600 lbs
adapter for rigid mounting – up to 8t / 17600 lbs
bolt-on-adapter for Oilquick OQ45 – 5t to 12t / 11000 lbs to 26400 lbs
bolt-on-adapter for Lehnhoff grab exchange system SW/MS03 with SW03 – up to 5t / 11000 lbs
adapter for quick exchange systems from other manufacturers available
solenoid valve for additional oil circuit, up to 26 MPa / 3744 psi, ready for mounting for self installation
solenoid valve for additional oil circuit, up to 26 MPa / 3744 psi, incl. assembly parts and mounting
KM 980-2 2-8t
KM 980-2 2-8t c
Requirements of Excavator
Operating pressure (open/close):
Recommended oil flow (open/close):
Operating pressure (rotation):
Recommended oil flow (rotation):
D03 - D05: max. 32 MPa (320 bar) / 4608 psi; internal pressure 26 MPa (260 bar) / 3744 psi
D03 - D05: 40 - max. 75 l/min / 10.57 - max. 19.82 GPM
D03 - D05: max. 32 MPa (320 bar) / 4608 psi
D03: 15 - max. 50 l/min / 3.96 - max. 13.21 GPM; D05: 20 - max. 50 l/min / 5.28 - max. 13.21 GPM
C max
Cmax
Technical Drawings
420
11°
660
A
D03HPX
E
A
E
D05HPX
We reserve the right to amend specifications without prior notice. Kinshofer GmbH, 83666 Waakirchen, Germany
13
1t
2t
3t
4t
5t
D09HPX
6t
7t
8t
9t
10 t
11 t
12 t
Demolition and Sorting Grab with HPXdrive
Demolition and sorting grab with the maintenance-free HPXdrive for
excavators up to 9t / 19800 lbs operating weight – the universal tool
for all kind of light demolition and sorting work.
lHPXdrive – the revolutionary concept for hydraulically operated grabs!
The rotation of the arms of the grab is generated by two hollow shafts,
which run opposed and have a helix thread, hydraulically driven by a
single piston. No hydraulic cylinder required!
l50% longer life cycle. The drive unit runs in a permanent oil bath –
no lubrication necessary. Resistant against dirt and blows, due
to the compact design.
lConstant closing forces during the entire operation.
lDifferent applications possible through easy exchange system.
lThe perforated skin of the shells lets fine dust and gravel through –
without larger pieces blocking the shell filter system.
lIntegrated non-return valve guarantees secure retention of the loads.
lLong life is ensured due to the use of 500 HB steel in the manufacture
of cutting edges (usable both sides).
Demolition and Sorting Grab D09HPX
Type
Width
E
(mm/in)
600 / 23.62
D09HPX-60
Package consists of:
Opening
Height
A
C max.
(mm/in)
(mm/in)
1400 / 55.12 1010 / 39.76
D09HPX
Volume
Self
weight
Load
capacity
Closing
force
Operating
weight
(litre/c.y.)
150 / 39.63
(kg/lbs)
360 / 792
(kg/lbs)
1000 / 2200
(kN/ft.lbs)
18 / 3960
(t/lbs)
5 - 9 / 11000 - 19800
demolition and sorting grab, KINSHOFER rotator, non-return valve, cutting edges
KINSHOFER Rotator
Integrated in a single unit with the HPXdrive, no more connecting hoses. Continous rotation. Overload protection ensured by pressure relief valves.
Type
Upper connection
(width/Ø-hole pattern)
(mm/in)
10 x M16 / Ø 273/10.75
KM 15 F273/273
Torque
Moment of deflection
max.
(Nm/ft.lbs)
50000 / 36875
(Nm/ft.lbs)
2000 / 1475
Accessories
Type
Description
KM 691 8t
KM 690 8t
OQ45
SW08 rigid
adapter connection plate for specific solutions – up to 8t / 17600 lbs
adapter for rigid mounting – up to 8t / 17600 lbs
bolt-on-adapter for Oilquick OQ45 – 5t to 12t / 11000 lbs to 26400 lbs
bolt-on-adapter for Lehnhoff grab exchange system SW/MS08 with SW08 – up to 12t / 26400 lbs
adapter for quick exchange systems from other manufacturers available
solenoid valve for additional oil circuit, up to 26 MPa / 37.44 psi, ready for mounting for self installation
solenoid valve for additional oil circuit, up to 26 MPa / 37.44 psi, incl. assembly parts and mounting
KM 980-2 2-8t
KM 980-2 2-8t c
Requirements of Excavator
Operating pressure (Open/Close):
Recommended oil flow (Open/Close):
Operating pressure (Rotation):
Recommended oil flow (Rotation):
max. 32 MPa (320 bar) / 4608 psi and internal working pressure of 26 MPa (260 bar) / 3744 psi
40 - max. 75 l/min / 10.57 - max. 19.82 GPM
max. 32 MPa (320 bar) / 4608 psi
20 - max. 50 l/min / 5.28 - max. 13.21 GPM
Technical Drawings
C
A
520
770
14
B
We reserve the right to amend specifications without prior notice. Kinshofer GmbH, 83666 Waakirchen, Germany
8t
9 t 10 t 11 t 12 t 13 t 14 t 15 t 16 t 17 t 18 t 19 t 20 t 21 t 22 t 23 t 24 t 25 t 26 t 27 t
Demolition and Sorting Grabs
D15H / D20H / D27H
Robust multi purpose grab for excavators up to 15t / 33000 lbs /
20t / 44000 lbs / 27t / 59400 lbs operating weight – ideal for demolition
and segmentation of all kinds of building materials. Ideal for separating
building debris and similar material.
l The grab is available with rlbs or a perforated skin – both versions let fine dust and gravel through. The durable cutting edges can retain different materials, using the edge tips.
lLong life is ensured due to the use of 500 HB steel in the manufacture of
replaceable cutting edges.
l Robust, fully integrated rotation with sturdy slewing ring to withstand external forces, with connecting hoses located inside the hub. Hydraulic quick exchange systems are mountable directly. Integrated pressure relief valve against overcharge.
lExceptional closing forces through two horizontally positioned hydraulic
cylinders that are protected by the bucket carrier.
lCylinders are hydraulically cushioned.
D20H
Demolition and Sorting Grabs with metal rlbs D15H / D20H / D27H
Type
Width
Opening Height
Height
Volume
Closing
Weight
Load
Torque
Operating
capacity
weight
E
A
C max.
C min.
force
(mm/in)
(mm/in) (mm/in) (mm/in) (litre/c.y.) (kg/lbs)
(kg/lbs)
(kN/Ibf ) (Nm/ft.lbs)
(t/lbs)
800 /
1540 /
1210 /
1070 /
300 /
655 /
4000 /
3000 /
11-15 /
D15H-80
36 / 7920
31.50
60.63
47.64
42.13
0.39
1441
8800
2215
24200-33000
1000 /
1925 /
1450 /
1235 /
450 /
1050 /
5000 /
4000 /
14-20 /
D20H-100
42 / 9240
39.37
75.79
57.09
48.62
0.59
2310
11000
2950
30800-44000
1150 /
2140 /
1615 /
1410 /
800 /
1585 /
6000 /
5000 /
20-27 /
D27H-115
63 / 13860
45.28
84.25
63.58
55.51
1.05
3487
13200
3690
44000-59400
demolition and sorting grab, integrated rotation with sturdy slewing ring, cutting edges and non-return valve
Package consists of:
Accessories
Type
Description
KM 690 15t
KM 690 20t
KM 690 27t
OQ60
OQ65
OQ70
OQ70/55
SW10 rigid
SW21 rigid
adapter for rigid mounting – up to 15t / 33000 lbs
adapter for rigid mounting – up to 20t / 44000 lbs
adapter for rigid mounting – up to 27t / 59400 lbs
bolt-on adapter for Oilquick OQ60 – 12t to 18t / 26400 lbs to 39600 lbs
bolt-on adapter for Oilquick OQ65 – 14t to 22t / 30800 lbs to 48400 lbs
bolt-on adapter for Oilquick OQ70 – 15t to 28t / 33000 lbs to 61600 lbs
bolt-on adapter for Oilquick OQ70/55 – 18t to 28t / 39600 lbs to 61600 lbs
bolt-on adapter SW10 for Lehnhoff quick change system MS/HS10 for rigid mounting – up to 19t / 41800 lbs
bolt-on adapter SW21 for Lehnhoff quick change system MS/HS21 for rigid mounting – up to 28t / 61600 lbs
adapter for quick exchange systems from other manufacturers available
bolt on side plates
retrofitted plate to close backside for handling of small material
KM 685 09 E
KM 685 10
Requirements of Excavator
Operating pressure (open/close):
Recommended oil flow (open/close):
Hydraulic connection (grab/rotate):
Operating pressure (rotation):
Recommended oil flow (rotation):
D15 - D20: max. 32 Mpa (320 bar) / 4608 psi; D27: max. 35 Mpa (350 bar) / 5040 psi
D15 - D27: 75 - max. 150 l/min / 19.82 - max. 39.63 GPM
D15 - D20: G 3/4“ / G 1/2“; D27: G 1“ / G 1/2“
D15: max. 15 MPa (150 bar) / 2160 psi;
D20 - D27: max. 17 MPa (170 bar) / 2448 psi
D15 - D27: 25 - max. 60 l/min / 6.61 - max. 15.85 GPM
C max
C min
Technical Drawings
D27H
A
E
We reserve the right to amend specifications without prior notice. Kinshofer GmbH, 83666 Waakirchen, Germany
15
8t
9 t 10 t 11 t 12 t 13 t 14 t 15 t 16 t 17 t 18 t 19 t 20 t 21 t 22 t 23 t 24 t 25 t 26 t 27 t
Demolition and Sorting Grabs
D12H-P / D15H-P / D20H-P / D27H-P
Robust multi purpose grab for excavators up to 12t / 26400 lbs
15t / 33000 lbs / 20t / 44000 lbs / 27t / 59400 lbs operating weight –
ideal for demolition and segmentation of all kinds of building
materials. Ideal for separating building debris and similar material.
l The grab is available with rlbs or a perforated skin – both versions let fine dust and gravel through. The durable cutting edges can retain different materials, using the edge tips.
lLong life is ensured due to the use of 500 HB steel in the manufacture of
replaceable cutting edges.
l Robust, fully integrated rotation with sturdy slewing ring to withstand external forces, with connecting hoses located inside the hub. Hydraulic quick exchange systems are mountable directly. Integrated pressure relief valve against overcharge. (D12: KM 15 F273/273)
lExceptional closing forces through two horizontally positioned hydraulic
cylinders that are protected by the bucket carrier.
lCylinders are hydraulically cushioned.
D27H-P-115
Demolition and Sorting Grabs with perforated shells D12H-P / D15H-P / D20H-P / D27H-P
Type
Width
Opening
Height Height
Volume
Closing
Weight
Load
Torque
Operating
capacity
weight
E
A
C max. C min.
force
(mm/in)
(mm/in)
(mm/in) (mm/in) (litre/c.y.)
(kg/lbs)
(kg/lbs) (kN/Ibf ) (Nm/ft.lbs)
(t/lbs)
600 /
1125 /
980 /
3000 /
3000 /
8-12 /
D12H-P-60
1550 / 61.02
225 / 0.29 470 / 1034
36 / 7920
23.62
44.29
38.58
6600
2215
17600-26400
800 /
1210 /
1070 /
4000 /
3000 /
11-15 /
D15H-P-80
1540 / 60.63
300 / 0.39 650 / 1430
36 / 7920
31.50
47.64
42.13
8800
2215
24200-33000
1000 /
1450 /
1235 /
5000 /
4000 /
14-20 /
D20H-P-100
1925 / 75.79
450 / 0.59 1020 / 2244
42 / 9240
39.37
57.09
48.62
11000
2950
30800-44000
1150 /
1615 /
1410 /
6000 /
5000 /
20-27 /
D27H-P-115
2140 / 84.25
800 / 1.05 1485 / 3267
63 / 13860
45.28
63.58
55.51
13200
3690
44000-59400
Package consists of:
demolition and sorting grab, integrated rotation with sturdy slewing ring, cutting edges and non-return valve
Accessories
Type
Description
KM 690 15t
KM 690 20t
KM 690 27t
OQ60
OQ65
OQ70
OQ70/55
SW10 rigid
SW21 rigid
adapter for rigid mounting – up to 15t / 33000 lbs
adapter for rigid mounting – up to 20t / 44000 lbs
adapter for rigid mounting – up to 27t / 59400 lbs
bolt-on adapter for Oilquick OQ60 – 12t to 18t / 26400 lbs to 39600 lbs
bolt-on adapter for Oilquick OQ65 – 14t to 22t / 30800 lbs to 48400 lbs
bolt-on adapter for Oilquick OQ70 – 15t to 28t / 33000 lbs to 61600 lbs
bolt-on adapter for Oilquick OQ70/55 – 18t to 28t / 39600 lbs to 61600 lbs
bolt-on adapter SW10 for Lehnhoff quick change system MS/HS10 for rigid mounting – up to 19t / 41800 lbs
bolt-on adapter SW21 for Lehnhoff quick change system MS/HS21 for rigid mounting – up to 28t / 61600 lbs
adapter for quick exchange systems from other manufacturers available
bolt on side plates
retrofitted plate to close backside for handling of small material
KM 685 09 E
KM 685 10
Requirements of Excavator
Operating pressure (open/close):
Recommended oil flow (open/close):
Hydraulic connection (grab/rotate):
Operating pressure (rotation):
Recommended oil flow (rotation):
D12 - D20: max. 32 Mpa (320 bar) / 4608 psi; D27: max. 35 Mpa (350 bar) / 5040 psi
D12 - D27: 75 - max. 150 l/min / 19.82 - max. 39.63 GPM
D12 - D20: G 3/4“ / G 1/2“; D27: G 1“ / G 1/2“
D12: max. 20 MPa (200 bar) / 2880 psi; D15: max. 15 MPa (150 bar) / 2160 psi;
D20 - D27: max. 17 MPa (170 bar) / 2448 psi
D12 - D27: 25 - max. 60 l/min / 6.61 - max. 15.85 GPM
A
16
C max
C min
Technical Drawings
E
D12H-P-60
We reserve the right to amend specifications without prior notice. Kinshofer GmbH, 83666 Waakirchen, Germany
10 t ... 15 t ... 19 t 20t 21t 22t 22t 23t 24t … 32t … 40 t … 50t … 80 t
Heavy Duty Demolition and Sorting Grabs
Robust multi-purpose grab with perforated shells, for excavators
from 10t / 22000 lbs up to 80t / 176000 lbs operating weight,
the HD D Series grabs are ideal for demolition and sorting of all
kinds of building materials.
lRobust Delta-box frame with dust-proof axle bearing points.
lPerforated shells let fine dust and gravel through without large
pieces getting caught.
l Durable and reversable cutting edges, made of Cracox Plus 450
steel can be used to pick up different materials, with their tips.
l Cutting edges on D19 series and higher can be turned three
ways, reducing replacement costs.
lRobust, fully integrated rotator with sturdy slewing ring to withstand
external forces, with pressure relief valve to ensure overload
protection, and connecting hoses protected inside the hub.
lExceptional closing forces achieved with a horizontally positioned
hydraulic cylinder that is protected by the bucket carrier.
l Cylinder is hydraulically cushioned.
D15H-P HD to D70H-P HD
D70H-P-150HD
Heavy Duty Demolition and Sorting Grabs with perforated shells D15H-P-75HD to D70H-P150HD
Type
Width E Opening A Height C Volume
Weight
Load
Closing force
Torque
Operating weight
(mm/in)
(mm/in)
(mm/in) (litre/c.y.)
(kg/lbs)
(kg/lbs)
(kN/Ibf )
(Nm/ft.lbs)
(t/lbs)
750
/
1730
/
1295
/
340
/
860
/
5000
/
3000
/
10
– 18 /
D15H-P-75HD
43 / 9460
29.53
68.11
50.98
0.44
1892
11000
2215
22000-39600
900 /
1730 /
1295 /
415 /
900 /
5500 /
3000 /
12 – 20 /
D16H-P-90HD
43 / 9460
35.43
68.11
50.98
0.54
1980
121000
2215
26400-44000
850 /
1755 /
1320 /
365 /
1030 /
6500 /
3000/5700 /
12 – 24 /
D19H-P-85HD
50 / 11000
33.46
69.09
51.97
0.48
2266
14300
2215/4205*
26400-52800
1000 /
1895 /
1400 /
460 /
1120 /
7000 /
3000/5700 /
13 – 25 /
D20H-P-100HD
50 / 11000
39.37
74.61
55.12
0.60
2464
15400
2215/4205*
28600-55000
1000 /
1990 /
1455 /
570 /
1315 /
8000 /
3000/5700 /
15 – 30 /
D24H-P-100HD
56 / 12320
39.37
78.35
57.28
0.75
2893
17600
2215/4205*
33000-66000
1100 /
2195/
1565 /
825 /
1820 /
10500 /
7000 /
20 – 40 /
D32H-P-110HD
70 / 15400
43.34
86.42
61.61
1.08
4004
23100
5165**
44000-88000
1250 /
2355 /
1640 /
960 /
2210 /
13500 /
7000 /
25 – 50 /
D40H-P-125HD
80 / 17600
49.21
92.72
64.57
1.26
4422
29700
5165**
55000 -110000
1400 /
2355 /
1650 /
1075 /
2330 /
16500 /
7000 /
35 – 60
D50H-P-140HD
80 / 17600
55.12
92.72
64.96
1.41
5126
36300
5165**
7700-132000
1500 /
2730 /
1930 /
1660 /
4000 /
23500 /
9000 /
50 – 80 /
D70H-P-150HD
140 / 30800
59.05
107.38
75.98
2.17
8800
51700
6640**
110000-176000
Package consists of: demolition and sorting grab, integrated rotation with sturdy slewing ring, cutting edges and non-return valve
Optional second heavy duty motor for D19H-P HD, D20H-P HD, D24H-P HD
Notes:
* optional with 2 motors for rotation
** second heavy duty hydraulic motor comes standard
Accessories
Type
KM 690 15t
KM 690 20t
KM 690 27t
KM 690 32t
KM 690 40t
KM 690 50t
KM 690 70t
OQ
SW rigid
Description
adapters for rigid mounting – for excavators up to 15t / 33000 lbs
adapters for rigid mounting – for excavators up to 20t / 44000 lbs
adapters for rigid mounting – for excavators up to 27t / 59400 lbs
adapters for rigid mounting – for excavators up to 32t / 70400 lbs
adapters for rigid mounting – for excavators up to 40t / 88000 lbs
adapters for rigid mounting – for excavators up to 50t / 110000 lbs
adapters for rigid mounting – for excavators up to 70t / 154000 lbs
bolt-on adapter for Oilquick OQ – 5t up to 70t / 11000 lbs up to 154000 lbs
bolt-on adapter SW for Lehnhoff quick change system MS/HS for rigid mounting – from 2t / 4400 lbs up to 120t / 264000 lbs
adapters for quick exchange systems from other manufacturers available
Requirements of Excavator
Operating pressure (open/close):
Recommended oil flow (open/close):
Hydraulic connection (grab/rotate):
Operating pressure (rotation:
Recommended oil flow (rotation):
Technical Drawings
D15 - D70: max. 35 MPa (350 bar) / 5040 psi
D15 / D16: max. 80 l/min / max. 21.14 GPM; D19 - D24: max. 100 l/min / max. 26.42 GPM;
D32 - D50: max.120 l/min / max. 31.70 GPM; D70: max. 200 l/min / max. 52.84 GPM
D15 - D24: G 3/4“ / G 1/2“; D32 - D50: G 1“ - 25S / G 1/2“; D70: G 1 1/4“ - 30S
D15 - D70: max. 14 Mpa (140 bar) / 2016 psi
D15 - D24: max. 40 l/min / max. 10.57 GPM; D32 - D70: 40 - max. 60 l/min / 10.57 - max. 15.85 GPM
D40H-P-125HD
We reserve the right to amend specifications without prior notice. Kinshofer GmbH, 83666 Waakirchen, Germany
17
8t
9 t 10 t 11 t 12 t 13 t 14 t 15 t 16 t 17 t 18 t 19 t 20 t 21 t 22 t 23 t 24 t 25 t 26 t 27 t
5-Finger Timber Grab
D15H-T / D20H-T / D27H-T
The robust 5-finger timber grab combines the strength of the demolition
and sorting grabs of the D-series with highly wear resistant timber grab
tines. For excavators of up to 15t / 33000 lbs, 20t / 44000 lbs or 27t /
59400 lbs operating weight – ideal for forestry works, rolled lumber,
special demolition tasks and pile foundations.
lKinematics of tines avoids clamping of material - made of highly wear
resistant material (HB 500).
l Branches with only 100mm diameter can be gripped firmly.
l Robust, fully integrated rotation with sturdy slewing ring to withstand external forces and two motors. Hydraulic quick exchange systems are
mountable directly. Integrated pressure relief valve against overcharge.
lExceptional closing forces through two horizontally positioned hydraulic
cylinders that are protected by the bucket carrier.
lCylinders are hydraulically cushioned.
D20H-5
Timber Grab D15H-T / D20H-T / D27H-T
Type
Width
E
(mm/in)
Opening
A
(mm/in)
Branch Ø
D min.
(mm/in)
Branch Ø
D max.
(mm/in)
Height
C max.
(mm/in)
D15H-T
740 / 29.13 1100 / 43.31
100 / 3.94
500 / 19.69
1040 / 40.94
D20H-T
825 / 32.48 1800 / 70.87
100 / 3.94
580 / 22.83
1350 / 53.15
D27H-T
1000 / 39.37 2100 / 82.68
125 / 4.92
700 / 27.56
1655 / 65.15
Package consists of:
Weight
(kg/lbs)
690 /
1518
1045 /
2299
1665 /
3663
Load
capacity
(kg/lbs)
3000 /
6600
4000 /
8800
6000 /
13200
Closing
force
Torque
Operating
weight
(kN/lbf )
(Nm/ft.lbs)
(t/lbs)
5700 /
11 - 15 /
37 / 8140
4205
24200 - 33000
5700 /
14 - 20 /
42 / 9240
4205
30800 - 44000
5700 /
18 - 27 /
59 / 12980
4205
39600 - 59400
timber grab, integrated rotation with sturdy slewing ring, and non-return valve
Accessories
Type
Description
KM 690 15t
KM 690 20t
KM 690 27t
OQ60
OQ65
OQ70
OQ70/55
SW10 rigid
SW21 rigid
adapter for rigid mounting – up to 15t / 33000 lbs
adapter for rigid mounting – up to 20t / 44000 lbs
adapter for rigid mounting – up to 27t / 59400 lbs
bolt-on adapter for Oilquick OQ60 – 12t to 18t / 26400 lbs to 39600 lbs
bolt-on adapter for Oilquick OQ65 – 14t to 22t / 30800 lbs to 48400 lbs
bolt-on adapter for Oilquick OQ70 – 15t to 28t / 33000 lbs to 61600 lbs
bolt-on adapter for Oilquick OQ70/55 – 18t to 28t / 39600 lbs to 61600 lbs
bolt-on adapter SW10 for Lehnhoff quick change system MS/HS10 for rigid mounting – up to 19t / 41800 lbs
bolt-on adapter SW21 for Lehnhoff quick change system MS/HS21 for rigid mounting – up to 28t / 61600 lbs
adapter for quick exchange systems from other manufacturers available
Requirements of Excavator
D15H-T / D20H-T
max. 32 MPa (320 bar) / 4608 psi
75 - max. 150 l/min / 19.82 - max. 39.63 GPM
G 3/4“ / G 1/2“
max. 17 Mpa (170 bar) / 2448 psi
25 - max. 60 l/min / 6.61 - max. 15.85 GPM
Operating pressure (open/close):
Recommended oil flow (open/close):
Hydraulic connection (grab/rotate):
Operating pressure (rotation):
Recommended oil flow (rotation):
D27H-T
max. 35 MPa (350 bar) / 5040 psi
75 - max. 150 l/min / 19.82 - max. 39.63 GPM
G 1“ / G 1/2“
max. 17 Mpa (170 bar) / 2448 psi
25 - max. 60 l/min / 6.61 - max. 15.85 GPM
C max
Technical Drawings
D min
D max
A
18
D20H-T
E
We reserve the right to amend specifications without prior notice. Kinshofer GmbH, 83666 Waakirchen, Germany
1t
2t
3t
4t
5t
6t
7t
8t
9 t 10 t … 15 t … 20 t … 30 t … 40 t
Concrete Crusher
DRC 520
Kinshofer concrete crusher DRC 520 for excavators up to 7t /
15400 lbs operating weight is extremely productive and strong.
Able to crush concrete and cut through steel reinforcements, the DRC 520
crusher can be used for both, primary and secondary demolition.
l Most appropriate for interior demolition jobs.
l Crushes concrete of 54 cm / 21.26 in thickness.
l Cuts steel reinforcements of 28 mm / 1.10 in diameter.
lStable steel flanks.
lOptional: additional breaking teeth for thinner walls.
l Replaceable breaker tips and reinforcement cutting blades made of of high
tensile steel HB 500.
l Crushing force independent of excavator‘s hydraulic pressure by means of
hydraulic booster.
l Pivot bearing for 360° endless rotation.
Concrete Crusher DRC 520
Type
DRC 520
(t/lbs)
Weight
(w/o / with
adapter plate)
(kg/lbs)
Shearing capacity
(with breaking tips
on opened crusher)
(kN/Ibf )
Cutting force
(of the reinforcing
rod cutter)
(kN/Ibf )
Cutting
capacity
( max.)
(mm/in)
4 - 7 / 8800 - 15400
350/405 / 770/891
466 / 102520
1659 / 364980
28 / 1.10
Height
C max.
(mm/in)
Width
(w/o adapter plate)
(mm/in)
Depth
B
(mm/in)
Jaw width
D
(mm/in)
Jaw depth
F
(mm/in)
960 / 37.80
925 / 36.42
400 / 15.75
540 / 21.26
195 / 7.68
Operating
weight
Dimensions
Type
DRC 520
Hydraulics
Type
Release pressure
min. - max. (MPa/psi)
DRC 520
Opening/Closing
Operating pressure
Flow rate max.
(MPa/psi)
(l/min/GPM)
18 - 27 / 2592 - 3888 psi
Accessories
Type
CP 520 (optional)
50 / 7200 psi
100 / 26.42
Operating cycle (at 70 l/min)
Opening
Closing
(sec)
2,1
2,5
Description
additional breaking teeth (2 pcs.)
F
C max.
B
Technical Drawings
D
E
We reserve the right to amend specifications without prior notice. Kinshofer GmbH, 83666 Waakirchen, Germany
19
15 t 16 t 17 t 18 t 19 t 20 t 21 t 22 t … 25 t … 30 t … 35 t … 50 t … 65 t
DSP
Static Pulverisers
Designed for secondary demolition, Kinshofer static Pulverisers
(standard or Extreme version) can both break up reinforced concrete
structures and separate the steel.
Up to 20% additional power and fast cycle times are achieved using the
patented DemaPower cylinder concept for the Extreme version.
Advantages:
l DemaPower achieves optimal speed and power (Extreme version).
l All teeth and scrapers are exchangeable.
l Exchangeable ground tooth plate and shrouds.
l Bearing points are engineered for optimum load handling
and reduced wear.
l Integrated dual action speed valve.
l Optional: exchangeable cutting blades.
l Wear parts are exchangeable on site.
Static Pulverizers DSP & DSP-Extreme
Type
DSP-30
DSP-30Extreme
DSP-45
DSP-45Extreme
DSP-60
DSP-60Extreme
Dimensions
Type
DSP-30
DSP-30Extreme
DSP-45
DSP-45Extreme
DSP-60
DSP-60Extreme
Hydraulics
Type
DSP-30
DSP-30Extreme
DSP-45
DSP-45Extreme
DSP-60
DSP-60Extreme
Operating weight
excavator (t/lbs)
20-35 / 44000-77000
20-35 / 44000-77000
30-50 / 66000-110000
30-50 / 66000-110000
42-65 / 92400-143000
42-65 / 92400-143000
Jaw opening
A
(mm/in)
885 / 34.84
885 / 34.84
1015 / 39.96
1015 / 39.96
1135 / 44.69
1135 / 44.69
Width
lower jaw B
(mm/in)
490 / 19.29
490 / 19.29
525 / 20.67
525 / 20.67
565 / 22.24
565 / 22.24
Self weight
(kg/lbs)
2135 / 4695
2115 / 4650
2670 / 5875
2645 / 5820
3570 / 7855
3525 / 7755
Width
upper jaw
C
(mm/in)
350 / 13.78
350 / 13.78
400 / 15.75
400 / 15.75
450 / 17.72
450 / 17.72
Open/Close
Pressure max.
Recommended oil flow
(bar/psi)
(l/min/GPM)
380 / 5472
150 - max. 250 / 39.63 - max. 66.05
380 / 5472
150 - max. 250 / 39.63 - max. 66.05
380 / 5472
200 - max. 300 / 52.84 - max. 79.26
380 / 5472
200 - max. 300 / 52.84 - max. 79.26
380 / 5472
300 - max. 400 / 79.26 - max. 105.68
380 / 5472
300 - max. 400 / 79.26 - max. 105.68
* closing force measured at front tooth
Closing force *
(t)
80
100
110
130
110
150
Height
Jaw depth
D
(mm/in)
2145 / 84.45
2145 / 84.45
2360 / 92.91
2360 / 92.91
2635 / 103.74
2635 / 103.74
E
(mm/in)
840 / 33.07
840 / 33.07
900 / 35.43
900 / 35.43
1000 / 39.37
1000 / 39.37
Length
cutting blades
**
(mm/in)
200 / 7.87
200 / 7.87
200 / 7.87
200 / 7.87
200 / 7.87
200 / 7.87
Cycle times
(open/close)
(sec)
2,5/ 2,5
2,0/ 2,3
2,6/ 2,9
2,0/ 2,9
2,6/ 2,8
2,0/ 2,8
** optional, not included in our standard package
Technical Drawings
20
We reserve the right to amend specifications without prior notice. Kinshofer GmbH, 83666 Waakirchen, Germany
16 t ... 20 t 21 t ... 25 t ... 29 t 30 t ... 35 t … 40 t … 50 t 51 t 52 t 53 t 54 t
Contractor Grapple
CG
Being a robust mechanical contractor grab with five strong,
interlocking tines - for excavators from 16t / 35200 lbs up to
54t /118800 lbs operating weight - the CG-series grapples are
ideal for demolition, material handling and sorting of all kinds
such as rocks, scrap and other debris.
l No additional hydraulics required.
l Available as pin-on attachment (fixed mount) or with pin-grabber
coupler (quick hitch).
l Wear-resistant fine grain steel in the construction of shell
interior and tines.
l Mounting pad and positioning arm included.
l Curved jaws allow for an easy handling of bulky material and a
better penetration and release of scrap and other debris.
l Large opening range.
l Weld in replaceable tine tips.
Contractor Grapples
Type
Opening
range A
(mm/in)
CG 40
2500 / 98
CG 50
2800 / 111
CG 70
3098 / 122
CG 100
3420 / 134
Package consists of:
Dimension
D
(mm/in)
195 / 7
254 / 10
305 / 12
305 / 12
Upper jaw width
E min
(mm/in)
711 / 28
762 / 30
813 / 32
900 / 35
Lower jaw width
E max
(mm/in)
1016 / 40
1118 / 44
1220 / 48
1320 / 55
Weight
Operating weight
(kg/lbs)
1130 / 2491
1500 / 3306
1800 / 4290
2300 / 5010
(t/lbs)
16 – 21 / 35 - 46000
21 – 29 / 46 - 65000
29 – 40 / 65 - 88000
40 – 54 / 88 - 118800
contractor grapple, positioning arm, mounting pad
Technical Drawings
We reserve the right to amend specifications without prior notice. Kinshofer GmbH, 83666 Waakirchen, Germany
21
15 t 16 t 17 t 18 t 19 t 20 t 21 t 22 t … 25 t … 30 t 32 t 35 t … 50 t … 65 t
Rotating Shears
DLC / DLD / DLP
The rotating demolition tools of the new Dedicated Demolition Line
have been developed for primary and secondary demolition. Their jaws
are designed for each application area within a demolition job site:
Combi Crusher DLC, Demolition Crusher DLD or Pulveriser DLP.
Advantages:
lPowerful cylinder with robust pin suspension.
lCylinder in two chamber technique with speed valve.
l Rotation with additional oil passage.
l Twin rotation motors for extra rotation power.
l Swing bearing double pivoted.
l Rotation circuit filters.
l Teeth, shrouds and cutting blades exchangeable.
l Excellent speed/ power to weight ratio.
l DLP: exchangeable ground tooth-plate.
Rotating Combi Crusher DLC
Type
Weight
Operating
weight
excavator
(t/lbs)
(kg/lbs)
18 - 25 /
1880 /
DLC-25
39600-55000
4135
22 - 35 /
2455 /
DLC-30
48400-77000
5400
32 - 50 /
3085 /
DLC-45
70400-110000
6785
Rotating Demolition Crusher DLD
Weight
Type
Operating
weight
excavator
(t/lbs)
(kg/lbs)
18 - 25 /
1905 /
DLD-25
39600-55000
4190
22 - 35 /
2450 /
DLD-30
48400-77000
5390
32 - 50 /
3110 /
DLD-45
70400-110000
6840
Rotating Pulverizer DLP
Type
Weight
Operating
weight
excavator
(t/lbs)
(kg/lbs)
18
25
/
1920 /
DLP-25
39600-55000
4225
22
35
/
2425
/
DLP-30
48400-77000
5335
32 - 50 /
3150 /
DLP-45
70400-110000
6930
45 - 65 /
4100 /
DLP-60
99000-143000
9020
Hydraulics
Type
DLC-25 / DLD-25 / DLP-25
DLC-30 / DLD-30 / DLP-30
DLC-45 / DLD-45 / DLP-45
DLP-60
Pressure max.
(bar/psi)
380 / 5472
380 / 5472
380 / 5472
380 / 5472
Jaw opening
A
(mm/in)
785 /
30.91
875 /
34.45
980 /
38.58
Jaw opening
A
(mm/in)
825 /
32.48
870 /
34.25
990 /
38.98
Jaw opening
A
(mm/in)
790 /
31.10
860 /
33.86
985 /
38.78
1150 /
45.28
DLD-25
Width
lower jaw
B
(mm/in)
390 /
15.35
455 /
17.91
470 /
18.50
Width
Height
Jaw depth
Length
upper jaw
cutting blades
C
D
E
(mm/in)
(mm/in)
(mm/in)
(mm/in)
90 /
800 /
400 /
1995
/
78.54
3.54
31.50
15.75
100 /
900 /
400 /
2150 / 84.65
3.94
35.43
15.75
100 /
990 /
500 /
2365 / 93.11
3.94
38.98
19.69
Width
lower jaw
B
(mm/in)
390 /
15.35
450 /
17.72
470 /
18.50
Width
upper jaw
C
(mm/in)
90 /
3.54
100 /
3.94
100 /
3.94
Width
lower jaw
B
(mm/in)
390 /
15.35
450 /
17.72
470 /
18.50
565 /
22.24
Width
upper jaw
C
(mm/in)
325 /
12.80
350 /
13.78
400 /
15.75
450/
17.72
Height
Jaw depth
D
(mm/in)
2035 /
80.12
2155 /
84.84
2360 /
92.91
E
(mm/in)
800 /
31.50
885 /
34.84
945 /
37.20
Height
Jaw depth
D
(mm/in)
2035 /
80.12
2155 /
84.84
2360 /
92.91
2550 /
100.39
E
(mm/in)
800 /
31.50
885 /
34.84
945 /
37.20
1020 /
40.16
Open/Close
Recommended oil flow
Pressure max.
(l/min/GPM)
(bar/psi)
120 - max. 200 / 31.70 - max. 52.84
140 / 2016
150 - max. 250 / 39.63 - max. 66.05
140 / 2016
200 - max. 300 / 52.84 - max. 79.26
140 / 2016
300 - max. 400 / 79.26 - max. 105.68
140 / 2016
Closing force
front tooth /
splitting tooth
(t/lbs)
70/100 /
154000/220000
80/125 /
176000/275000
110/150 /
242000/330000
Length
Closing force
cutting blades front tooth /
splitting tooth
(mm/in)
(t/lbs)
200 /
75/120 /
7.87
165000/264000
200 /
85/135 /
7.87
187000/297000
200 /
110/160 /
7.87
242000/352000
Length
Closing force
cutting blades front tooth /
splitting tooth
(mm/in)
(t/lbs)
200 /
70/100 /
7.87
154000/220000
200 /
80/125 /
7.87
176000/275000
200 /
110/150 /
7.87
242000/330000
250 /
125/185 /
7.87
275000/407000
Rotation
Cycle times
Recommended oil flow
(open/close)
(l/min/GPM)
40 - max. 60 / 10.57 - max. 15.85
2,5 / 2,5
40 - max. 60 / 10.57 - max. 15.85
2,5 / 2,5
40 - max. 60 / 10.57 - max. 15.85
2,6 / 2,9
40 - max. 60 / 10.57 - max. 15.85
2,6 / 2,8
Technical Drawings
DLC 25
DLC-25
Combi-Crusher
22
DLD-25
Demolition Crusher
DLP-25
Pulveriser
We reserve the right to amend specifications without prior notice. Kinshofer GmbH, 83666 Waakirchen, Germany
15 t 16 t 17 t 18 t 19 t 20 t 21 t 22 t … 25 t … 30 t 32 t 35 t … 50 t … 65 t
Rotating Shears with DemaPower
DRC / DRD / DRP
The rotating demolition tools of the new Dedicated Demolition Line have been
developed for primary and secondary demolition. Their jaws are designed to each
application area within a demolition job site: Combi Crusher DRC, Demolition
Crusher DRD or Pulveriser DRP. The patented DemaPower cylinder concept
provides up to 20% more power and obviously quicker cycle times.
Advantages:
lMaximized working speed with the DemaPower cylinder and robust
pin suspension, four chamber technique and speed valve.
l Rotation head with additional oil passage.
l Twin rotation motors for extra rotation power.
l Swing bearing double pivoted.
l Rotation circuit filters.
l Teeth, shrouds and cutting blades exchangeable.
l Excellent speed/ power to weight ratio.
l DRP: exchangeable ground tooth-plate.
Rotating Combi Crusher DRC
Type
Weight
Operating
weight
excavator
(t/lbs)
(kg/lbs)
18 - 25 /
1880 /
DRC-25
39600-55000
4135
22 - 35 /
2440 /
DRC-30
48400-77000
5370
32 - 50 /
3060 /
DRC-45
70400-110000
6730
Rotating Demolition Crusher DRD
Weight
Type
Operating
weight
excavator
(t/lbs)
(kg/lbs)
18 - 25 /
1905 /
DRD-25
39600-55000
4190
22 - 35 /
2435 /
DRD-30
48400-77000
5355
32 - 50 /
3085 /
DRD-45
70400-110000
6785
Rotating Pulverizer DRP
Weight
Type
Operating
weight
excavator
(t/lbs)
(kg/lbs)
18 - 25 /
1910 /
DRP-25
39600-55000
4200
22 - 35 /
2410 /
DRP-30
48400-77000
5300
32 - 50 /
3125 /
DRP-45
70400-110000
6875
45 - 65 /
4100 /
DRP-60
99000-143000
9020
Hydraulics
Type
Jaw opening
A
(mm/in)
785 /
30.91
875 /
34.45
980 /
38.58
Jaw opening
A
(mm/in)
825 /
32.48
870 /
34.25
990 /
38.98
Jaw opening
A
(mm/in)
790 /
31.10
860 /
33.86
980 /
38.58
1150 /
45.28
Pressure max.
(bar/psi)
DRC-25 / DRD-25 / DRP-25
380 / 5472
DRC-30 / DRD-30 / DRP-30
380 / 5472
DRC-45 / DRD-45 / DRP-45
380 / 5472
DRP-60
380 / 5472
Width
lower jaw
B
(mm/in)
390 /
15.35
455 /
17.91
470 /
18.50
Width
upper jaw
C
(mm/in)
90 /
3.54
100 /
3.94
100 /
3.94
Width
lower jaw
B
(mm/in)
390 /
15.35
450 /
17.72
470 /
18.50
Width
upper jaw
C
(mm/in)
90 /
3.54
100 /
3.94
100 /
3.94
Width
lower jaw
B
(mm/in)
390 /
15.35
450 /
17.72
470 /
18.50
565 /
22.24
Width
upper jaw
C
(mm/in)
325 /
12.80
350 /
13.78
400 /
15.75
450/
17.72
Open/Close
Recommended oil flow
(l/min/GPM)
120 - max. 200 / 31.70 - max. 52.84
150 - max. 250 / 39.63 - max. 66.05
200 - max. 300 / 52.54 - max. 79.26
300 - max. 400 / 79.26 - max. 105.68
DRD-25
Height
Jaw depth
D
(mm/in)
2365 / 93.11
E
(mm/in)
800 /
31.50
900 /
35.43
990 /
38.98
Height
Jaw depth
D
(mm/in)
2035 /
80.12
2155 /
84.84
2360 /
92.91
E
(mm/in)
800 /
31.50
885 /
34.84
945 /
37.20
Height
Jaw depth
D
(mm/in)
1980 /
77.95
2155 /
84.84
2360 /
92.91
2550 /
100.39
E
(mm/in)
800 /
31.50
885 /
34.84
945 /
37.20
1020 /
40.16
1995 / 78.54
2150 / 84.65
Pressure max.
(bar/psi)
140 / 2016
140 / 2016
140 / 2016
140 / 2016
Length
cutting blades
(mm/in)
400 /
15.75
400 /
15.75
500 /
19.69
Length
cutting blades
(mm/in)
200 /
7.87
200 /
7.87
200 /
7.87
Length
cutting blades
(mm/in)
200 /
7.87
200 /
7.87
200 /
7.87
250 /
7.87
Closing force
front tooth /
splitting tooth
(t/lbs)
85/120 /
187000/264000
100/150 /
220000/330000
130/185 /
286000/407000
Closing force
front tooth /
splitting tooth
(t/lbs)
90/145 /
198000/319000
105/160 /
231000/352000
130/195 /
286000/429000
Closing force
front tooth /
splitting tooth
(t/lbs)
85/130 /
187000/286000
100/150 /
220000/330000
130/185 /
286000/407000
150/205 /
330000/451000
Rotation
Cycle times
Recommended oil flow
(open/close)
(l/min/GPM)
40 - max. 60 / 10.57 - max. 15.85
2,0 / 2,3
40 - max. 60 / 10.57 - max. 15.85
2,0 / 2,5
40 - max. 60 / 10.57 - max. 15.85
2,0 / 2,9
40 - max. 60 / 10.57 - max. 15.85
2,0 / 2,8
Technical Drawings
DRP 45
DRC-25
Combi-Crusher
DRD-25
Demolition Crusher
We reserve the right to amend specifications without prior notice. Kinshofer GmbH, 83666 Waakirchen, Germany
DRP-25
Pulveriser
23
15 t 16 t 17 t 18 t 19 t 20 t 21 t 22 t … 25 t … 30 t … 35 t … 50 t … 65 t
Multi-Quick Processor
MQP
UNIQUE JAW EXCHANGE SYSTEM
Fast. Easy. Safe.
Rotation with
additional
oil passage
The patented DemaPower cylinder concept provides up to 20% more
power and extremely fast cycle times
Rotation circuit filters
Guide plate at
pivot point for
more precise
alignment and
greater jaw
stability
Twin rotation motors
All
wear parts are exchangeable
on site
Jaw Options:
Combi Jaws
24
With the incorporated
DemaLink the jaw set can
be exchanged on site in
less than 10 minutes
Demolition Jaws
Pulveriser Jaws
Exchanging
Jaws
(Combi style
shown)
Steel Jaws
Tank Jaws
Universal Jaws
We reserve the right to amend specifications without prior notice. Kinshofer GmbH, 83666 Waakirchen, Germany
15 t 16 t 17 t 18 t 19 t 20 t 21 t 22 t … 25 t … 30
27 t … 35 t 40
…t 50 t … 65 t
MQP
Multi-Quick Processor
Used for cutting and crushing concrete with steel reinforcement
and cutting steel structures, the Kinshofer Multi-Quick
Processor with DemaPower and DemaLink was developed for primary
and secondary demolition. It has six convenient jaw options:
Combi, Demolition, Pulveriser, Steel, Tank and Universal jaws
The patented DemaPower cylinder provides up to 20% more power and
reduces cycle times to under 5 seconds.
l Rotation circuit filters.
l Rotation head with additional oil passage.
l Twin rotation motors for extra rotation power.
lGuide plate at pivot point for more precise alignment and greater jaw stability.
l All teeth and cutting blades are exchangeable.
l Bearing points engineered for optimum load handling and reduced wear.
l With the integrated DemaLink the jaw set can be exchanged on site in less than
10 minutes.
l
Multi-Quick Processors / individual yoke
Type
Operating weight
excavator
(t/lbs)
MQP-25-Y
18 - 25 / 39600 - 55000
MQP-30-Y
22 - 35 / 48400 - 77000
MQP-45-Y
32 - 50 / 70400 - 110000
MQP-60-Y
45 - 65 / 99000 - 143000
Multi-Quick Processors / MQP complete
Type
Weight
(complete
with yoke)
Combi Jaws:
(kg/lbs)
MQP-25-C
2060 / 4532
MQP-30-C
2680 / 5896
MQP-45-C
3365 / 7403
MQP-60-C
4525 / 9955
Weight
(upper &
lower jaws)
(kg/lbs)
845 / 1860
1190 / 2620
1540 / 3390
2085 / 4590
MQP with
Pulveriser Jaws
Weight
Height
Width
Depth
(kg/lbs)
1215 / 2675
1490 / 3280
1825 / 4015
2440 / 5370
(mm/in)
1150 / 45.27
1205 / 47.44
1345 / 54.13
1450 / 57.09
(mm/in)
640 / 25.20
720 / 28.35
720 / 28.35
880 / 34.65
(mm/in)
1140 / 44.88
1195 / 47.05
1290 / 50.79
1485 / 58.46
Closing
force *
Cycle times
(open / close)
(sec)
1,5 / 2,3
2,0 / 2,3
2,0 / 2,9
2,0 / 2,8
(t/lbs)
85 / 187000
100 / 220000
130 / 286000
150 / 330000
Jaw
opening
A
(mm/in)
785 / 30.91
870 / 34.25
980 / 38.58
1150 / 45.28
Height
Width
Width
lower jaw upper jaw
B
C
D
(mm/in)
(mm/in)
(mm/in)
375 / 14.76 90 / 3.54 1940 / 76.38
440 / 17.32 100 / 3.94 2155 / 84.84
450 / 17.72 100 / 3.94 2360 / 92.91
480 / 18.90 100 / 3.94 2600 / 102.36
E
(mm/in)
810 / 31.89
920 / 36.22
990 / 38.98
1050 / 41.34
Jaw depth
Demolition Jaws:
MQP-25-D
MQP-30-D
MQP-45-D
MQP-60-D
2085 / 4587
2690 / 5918
3405 / 7491
4495 / 9889
870 / 1915
1200 / 2640
1580 / 3475
2055 / 4520
90 / 198000
100 / 220000
130 / 286000
150 / 330000
815 / 32.09
870 / 34.25
990 / 38.98
1175 / 46.26
460 / 18.11
470 / 18.50
515 / 20.28
550 / 21.65
90 / 3.54 1980 / 77.95
100 / 3.94 2160 / 85.04
100 / 3.94 2355 / 92.72
100 / 3.94 2620 / 103.15
810 / 31.89
900 / 35.43
960 / 37.80
1090 / 42.91
Pulveriser Jaws:
MQP-25-P
MQP-30-P
MQP-45-P
MQP-60-P
2100 / 4620
2665 / 5863
3450 / 7590
4565 / 7590
885 / 1950
1175 / 2585
1625 / 3575
2125 / 4675
85 / 187000
100 / 220000
130 / 286000
150 / 330000
790 / 31.10
880 / 34.65
980 / 38.58
1150 / 45.28
400 / 15.75
470 / 18.50
515 / 20.28
550 / 21.65
325 / 12.80
350 / 13.78
400 / 15.75
450 / 17.72
1980 / 77.95
2165 / 85.24
2355 / 92.72
2620 / 103.15
810 / 31.89
830 / 32.68
945 / 37.20
1090 / 42.91
Steel Jaws:
MQP-25-S
MQP-30-S
MQP-45-S
MQP-60-S
1985 / 4367
2460 / 5412
3130 / 6886
4315 / 9493
770 / 1695 300 / 660000
970 / 2135 340 / 748000
1305 / 2870 415 / 913000
1875 / 4125 465 / 1023000
370 / 14.57
410 / 16.14
465 / 18.31
540 / 21.26
320 / 12.60
355 / 13.98
375 / 14.76
410 / 16.14
100 / 3.94
120 / 4.72
120 / 4.72
120 / 4.72
1750 / 68.90
1910 / 75.20
2105 / 82.87
2335 / 91.93
560 / 22.05
600 / 23.62
700 / 27.56
750 / 29.53
Tank Jaws:
MQP-25-T
MQP-30-T
MQP-45-T
MQP-60-T
2130 / 4686
2710 / 5962
3320 / 7304
4460 / 9812
915 / 2015 295 / 649000
1220 / 2684 360 / 792000
1495 / 3290 460 / 1012000
2020 / 4445 655 / 1441000
330 / 12.99
335 / 13.19
390 / 15.35
400 / 15.75
265 / 10.43
305 / 12.01
305 / 12.01
355 / 13.98
100 / 3.94
120 / 4.72
120 / 4.72
150 / 5.91
1965 / 77.36
2070 / 81.50
2275 / 89.57
2415 / 95.08
570 / 22.44
575 / 22.64
630 / 24.80
660 / 25.98
Universal Jaws:
MQP-30-U
2640 / 5808 1150 / 2530 110 / 242000
590 / 23.23 500 / 19.69 280 / 11.02 2040 / 80.31
MQP-45-U
3195 / 7029 1370 / 3015 145 / 319000
670 / 25.40 525 / 20.67 310 / 12.20 2225 / 87.60
MQP-60-U
4425 / 9735 1985 / 4367 180 / 396000
820 / 32.28 590 / 23.23 340 / 13.39 2470 / 97.24
* closing force for C-, D-, P- and U-jaw measured at front tooth, for S- and T-jaw measured at mid point of inner blade
790 / 31.10
830 / 32.68
880/ 34.65
Requirements of Excavator
Operating pressure (open/close):
Recommended oil flow (open/close):
MQP-25
MQP-30
MQP-45
MQP-60
Operating pressure (rotation):
Recommended oil flow (rotation):
max. 38 MPa (380 bar) / 5472 psi
Technical Drawings
120 - max. 200 l/min / 31.70 - max. 52.84 GPM
150 - max. 250 l/min / 39.63 - max. 66.05 GPM
200 - max. 300 l/min / 52.84 - max. 79.26 GPM
300 - max. 400 l/min / 79.26 - max. 105.68 GPM
max. 14 MPa (140 bar) / 2016 psi
40 - max. 60 l/min / 10.57 - max. 15.85 GPM
MQP with
Combi Jaws
We reserve the right to amend specifications without prior notice. Kinshofer GmbH, 83666 Waakirchen, Germany
25
14 t
…
20 t
…
25 t
…
30 t
…
50 t
…
65 t
…
75 t 80 t 90 t 100 t
Mobile Shears with 360° Rotation
DRS
The Kinshofer DRS Mobile Shear with its 360° rotation has been engineered to
achieve an optimal power to weight ratio. This robust tool can be used for a wide variety
of jobs including concrete and steel structural demolition, scrap yards, conditioning
of industrial mixed scrap and even processing steel-reinforced concrete. With three
different mounting options, the DRS line is available in five different sizes, suitable
for excavators from 14t / 30800 lbs to 100t / 220000 lbs operating weight.
lPowerful cylinder with speed valve – fully protected in the housing.
l Housing made of extremely resistant special steel.
l Heavy duty bearings for reduced bushing wear – without allowance.
l Very high cutting force: optimal power to weight ratio. Robust mouth.
l Optimal mouth design with large opening for scrap and concrete.
l More cutting force by displaced angles of the two cutting blades.
l All wear cutting blades can be turned four times and – whenever
material gets jammed – be loosened from outside.
l Exchangeable, weldable piercing tip.
l Heavy duty 360° rotation with oversized slewing ring, driven by (two)
motors. Also available without rotation.
DRS-25-A
2150 / 4730
2740 / 107.87
500 / 19.69
460 / 18.11
180/280 / 7.09/11.02
DRS-30-A
3100 / 6820
2975 / 117.13
580 / 22.83
490 / 19.29
200/300 / 7.87/11.81
DRS-45-A
4100 / 9020
3290 / 129.53
625 / 24.61
540 / 21.26
225/330 / 8.89/12.99
DRS-60-A
5550 / 12210
3725 / 146.65
720 / 28.35
620 / 24.41
250/380 / 9.84/14.96
DRS-60-B
5640 / 12410
4135 / 162.80
720 / 28.35
620 / 24.41
250/380 / 9.84/14.96
DRS-60-C
4850 /10670
3285 / 129.33
720 / 28.35
620 / 24.41
250/380 / 9.84/14.96
DRS-75-A
6950 / 15290
4085 / 160.83
825 / 32.48
720 / 28.35 300/440 / 11.81/17.32
DRS-75-B
7050 / 15510
4575 / 180.12
825 / 32.48
720 / 28.35 300/440 / 11.81/17.32
DRS-75-C
6200 / 13640
3660 / 144.10
825 / 32.48
720 / 28.35 300/440 / 11.81/17.32
DRS-90-A
8500 / 18700
4800 / 188.98
960 / 37.80
815 / 32.09 350/480 / 13,78/18.90
DRS-90-B
8600 / 18920
4920 / 193.70
960 / 37.80
815 / 32.09 350/480 / 13,78/18.90
DRS-90-C
7700 / 16940
4005 / 157.68
960 / 37.80
815 / 32.09 350/480 / 13,78/18.90
*cutting force calculated at a distance of 120 mm / 4.72 in (DRS-25) / 140 mm / 5.51 in (DRS-30) /
DRS-25
DRS-30
DRS-45
DRS-60
DRS-75
DRS-90
Operating
Operating
weight (boom) weight (dipper)
(kN/lbf)
(t/lbs)
(t/lbs)
14
20
/
20
- 30 /
4975 / 1094500 30800 - 44000
44000 - 66000
18 - 25 /
25 - 35 /
6750 / 1485000 39600
- 55000
55000 - 77000
25 - 35 /
32 - 50 /
8210 / 1806200 55000
- 77000
70400 - 110000
30 - 50 /
45 - 65 /
10990 / 2417800 66000
- 110000 99000 - 143000
30 - 50 /
10990 / 2417800 66000
- 110000
25
35
/
10990 / 2417800 55000 - 77000
35 - 65 /
60 - 80 /
14270 / 3139400 77000
- 143000 132000 - 176000
35 - 65 /
14270 / 3139400 77000
- 143000
30 - 50 /
14270 / 3139400 66000
- 110000
45
80
/
75
100
/
19450 / 4279000 99000 - 176000 165000 - 220000
45 - 80 /
19450 / 4279000 99000
- 176000
40
70
/
19450 / 4279000 88000 - 154000
160 mm / 6.30 in (DRS-45 to DRS-90) from center of pin
Open/ Close
Rotate
Pressure max.
Recommended oil flow
Pressure max.
Recommended oil flow
(bar/psi)
(l/min / GPM)
(bar/psi)
(l/min / GPM)
380 / 5472
150 - max. 250 / 39.63 - max. 66.05 140 / 2016
40 - max. 60 / 10.57 - max. 15.85
380 / 5472
200 - max. 300 / 52.84 - max. 79.26 140 / 2016
40 - max. 60 / 10.57 - max. 15.85
380 / 5472 300 - max. 400 / 79.26 - max. 105.68 140 / 2016
40 - max. 60 / 10.57 - max. 15.85
400 - max. 600 /
380 / 5472
200
/
2880
max. 60 / 15.85
105.68 - max. 158.52
600
max.
800
/
380 / 5472
200 / 2880
max. 60 / 15.85
158.52 - max. 211.36
700
max.
1000
/
380 / 5472
200 / 2880
max. 60 / 15.85
184.94 - max. 264.20
525
150
Hydraulics
Type
Cutting force*
Back pressure
max.
(bar/psi)
10 / 144
(drain line required)
Working cycle
open/close
(sec)
2.4 / 2.3
2.9 / 3.0
3.7 / 2.2
3.0 / 2.2
1165
Mobile Shears with 360° Rotation DRS / rigid mount (without Rotation)
Jaw opening Jaw depth
Primary
Type
Weight
Length A
(w/o adapter) (w/o adapter)
B
C
cutter length
(kg/lbs)
(mm/in)
(mm/in)
(mm/in)
(mm/in)
10 / 144
3.0 / 2.5
10 / 144
3.5 / 2.5
(drain line required)
(drain line required)
Technical Drawings
C
720
B830
1685
DRS-75-A
A
4100
26
We reserve the right to amend specifications without prior notice. Kinshofer GmbH, 83666 Waakirchen, Germany
14 t
…
20 t
…
25 t
…
30 t
…
DRS
Performance Data
Type
DRS-25
DRS-30
DRS-45
DRS-60
DRS-75
DRS-90
50 t
…
65 t
…
75 t 80 t 90 t 100 t
Mobile Shears with 360° Rotation
Narrow
I-beam
IPE 450
IPE 500
IPE 600
IPE 700
IPE 800
IPE 900
Middle
I-beam
INP 320
INP 400
INP 450
INP 500
INP 550
INP 600
Narrow
H-beam
HEA 280
HEA 340
HEA 400
HEA 500
HEA 600
HEA700
Middle
H-beam
HEB 200
HEB 260
HEB 300
HEB 360
HEB 400
HEB 450
Wide
H-beam
HEM 100
HEM 140
HEM 160
HEM 180
HEM 200
HEM 220
Type
Round
Hot rolled
Hot rolled
Sheet steel
Steel tube
angle steel
round steel
square steel
thickness
Ø x thickness
DRS-25
200 x 200 x 15 / 7.87 - 7.87 x 0.59
Ø 75 / 2.95
65 x 65 / 2.56 x 2.56
15 / 0.59
254 x 9 (16“) / 10.00 x 0.35
DRS-30
250 x 250 x 20 / 9.84 x 9.84 x 0.79
Ø 90 / 3.54
80 x 80 / 3.15 x 3.15
20 / 0.79
304 x 10 (12“) / 11.97 x 0.39
DRS-45
250 x 250 x 25 / 9.84 x 9.84 x 0.98
Ø 100 / 3.94
90 x 90 / 3.54 x 3.54
25 / 0.98
406 x 10 (16“) / 15.98 x 0.39
DRS-60
300 x 300 x 25 / 11.81 x 11.81 x 0.98
Ø 115 / 4.53
100 x 100 / 3.94 x 3.94
25 / 0.98
457 x 10 (18“) / 17.99 x 0.39
DRS-75
300 x 300 x 30 / 11.81 x 11.81 x 1.18
Ø 130 / 5.12
120 x 120 / 4.72 x 4.72
30 / 1.18
559 x 10 (22“) / 22.01 x 0.39
DRS-90
350 x 350 x 30 / 13.78 x 13.78 x 1.18
Ø 150 / 5.91
135 x 135 / 5.31 x 5.31
35 / 1.38
609 x 10 (24“) / 23.98 x 0.39
Dimensions: standardized wide flange beams (HEA, HEB, HEM) and section steel (IPE, INP) according to DIN EN 10 034 or cross section / sheet
thickness in mm / in
Note: The capability to cut the above profiles assumes the tensile strength of the steel 370 N/mm² as well as the shear
operating pressure of 350 bar / 5040 psi. In borderline cases, we recommend an actual test cut is made to determine whether
the profile in question can be cut. Larger beams can be often cut in two steps.
Technical Drawings
DRS-75-A
rotating, for mount on dipper or boom with a bolt-on adapter**
DRS-75-B
rotating, for mount on boom with a weld-on adapter**
DRS-75-C
non-rotating, for mount on boom with a weld-on adapter**
**note: adapters are not inclusive
We reserve the right to amend specifications without prior notice. Kinshofer GmbH, 83666 Waakirchen, Germany
27
EXA-KIN-DEM-E-0115
Hauptsitz Deutschland:
Kinshofer GmbH
Hauptstrasse 76
83666 Waakirchen
Tel.: +49 (0)8021 – 88 99 0
Fax: +49 (0)8021 – 88 99 37
Email: info@kinshofer.com
www.kinshofer.com
United Kingdom:
Kinshofer UK Ltd.
4 Milton Industrial Court
Horsfield Way, Bredbury
Stockport, Cheshire, SK6 2TA
Tel.: +44 (0)161 – 406 7046
Fax: +44 (0)161 – 406 7014
Email: sales@kinshofer.co.uk
www.kinshofer.com
France:
Kinshofer  France S.A.R.L.
B.P. 20100
F-67213 Obernai Cedex
Tel.:   +33(0) 3 88 39 55 00
Fax:  +33(0) 3 88 79 06 75
Email: sales-france@kinshofer.com
www.kinshofer.com
Canada:
Kinshofer North America
5040 Mainway Drive, Unit #11
Burlington, ON L7L 7G5
Tel.: +1 (905) 335 2856
Fax: +1 (905) 335 4529
Toll Free (North America):
1 (800) 268 9525
Email: sales-northamerica@kinshofer.com
www.kinshofer.com
United States of America:
Kinshofer USA
6420 Inducon Drive
Suite G
Sanborn, NY, 14132
Tel.: +1 (716) 731 4333
Toll Free (North America):
1 (800) 268 9525
www.kinshofer.com
中国:
Darda Kinshofer Construction
Machinery Co. Ltd.
Unit #306, Landmark Tower 2
8 Dongsanhuan Road
Beijing 100004
Tel.: +86 (10) 6590 6422
Fax: +86 (10) 6590 6423
Email: info@darda.com.cn
www.darda.com.cn
Suomi (valid until February 2015):
Kinshofer Aponox Oy
Laajamäentie 1
FI-13430 Hämeenlinna
Tel.: +358 (0)75 7540 200
Fax: +358 (0)75 7540 210
Email: sales-finland@kinshofer.com
www.kinshofer.com
Suomi (valid from February 2015):
Kinshofer Finland Oy
Realparkinkatu 9,
FI-37570 Lempäälä
Tel.: +358 (0)75 7540 200
Fax: +358 (0)75 7540 210
Email: sales-finland@kinshofer.com
www.kinshofer.com
Sverige:
RF System AB
Furutorpsgatan 6
SE-288 34 Vinslöv
Tel.: +46 (0)44 817 07
Fax: +46 (0)44 859 63
Email: info@rf-system.se
www.rf-system.se
www.kinshofer.com
Upfront, everywhere
KINSHOFER is an
ISO 9001 certified Company.
DVS ZERT is a registred trademark
of DVS ZERT® e.V., Düsseldorf.
We reserve the right to amend specifications without prior notice. Kinshofer GmbH, 83666 Waakirchen, Germany