HGF
Three-phase electric motor
General information file
IEC e NEMA
WEG Equipamentos Elétricos S/A
Av. Prefeito Waldemar Grubba, 3000 - 89256-900 - Jaraguá do Sul - SC - Fone (47) 3276-4000 - Fax (47) 3276-4010 – www.weg.net
The WEG HGF motor line is a product designed for
industrial applications featuring high performance
and reliable for the most severe operating conditions.
Intensive standardization and optimization works
have been carried out by WMO engineering team
with the application of state-of-art tools aiming at
achieving a tough design for easy maintenance. This
development has resulted in a versatile product with
shorter manufacturing lead time, meeting all electric
motor standard requirements and totally aligned with
the word market trends.
New Frame – mechanical resistance aligned to
thermal performance
Cast Iron frame construction – high resistance on all
components
Vertical motors – simple rugged design
for high thrust application
Sleeve Bearings – maximum bearing life and low
maintenance
New cast iron fan cover design – lower noise
levels and higher mechanical resistance
WEG Equipamentos Elétricos S/A
Av. Prefeito Waldemar Grubba, 3000 - 89256-900 - Jaraguá do Sul - SC - Fone (47) 3276-4000 - Fax (47) 3276-4010 – www.weg.net
Foreword
This material contains information for catalogue production and other kinds of advertising material to
HGF lines: General Purpose, Mining, Non-sparking Ex n, Vertical High Thrust and API 541 in the IEC
and NEMA versions. Increased Safety Ex e motors are available on request.
WEG Equipamentos Elétricos S/A
Av. Prefeito Waldemar Grubba, 3000 - 89256-900 - Jaraguá do Sul - SC - Fone (47) 3276-4000 - Fax (47) 3276-4010 – www.weg.net
Introduction
HGF are compact and of simplified construction
electrical machines widely used due to their
high reliability, with makes them suitable to all
kinds of application in the industry.
The frame construction features a high
resistance solid block, with external fins
providing maximum heat dissipation, increasing
in this way motor operating lifetime.
HGF are designed in accordance with IEC
60034-1 standard (in Brazil ABNT NBR 170941; North American and Canadian markets use
NEMA MG1). The mechanical design follows
IEC 60072 standard (in Brazil ABNT NBR
15623 and North American and Canadian
markets NEMA MG1).
HGF are asynchronous squirrel cage motors
with aluminum or copper (to HGF API 541
version) rotors. They are available in IEC
315L/A/B to 630 (NEMA 5006/07/08T to 96)
frames in low and high voltage (up to 6.6 kV).
High voltage motors above 6.6 kV and up to 11
kV are available on request.
They are easily adapted to different application
types due to its flexible design that complies
with the requirements of variable and constant
torque loads, such as fans, pumps, mills,
compressors and others.
HGF motors can operate in -20°C to +40°C
ambient temperatures. WEG can also supply
on special request HGF motors to different
ambient temperature range.
The cooling system consists of an internal and
an
external
fan,
assuring
maximum
performance through a better temperature
balance inside the motor.
HGF Motor Frame 315 C/D/E (5006/7/8T) exploded view
WEG Equipamentos Elétricos S/A
Av. Prefeito Waldemar Grubba, 3000 - 89256-900 - Jaraguá do Sul - SC - Fone (47) 3276-4000 - Fax (47) 3276-4010 – www.weg.net
Codification
HGF motors are codified following the rules
below:
IEC:
To 315, 355 and 400 sizes there are two frame
lengths available, with 3 foot distances each
one. So:
HGF 315L/A/B and HGF 315C/D/E
HGF 355L/A/B and HGF 355C/D/E
HGF 400L/A/B and HGF 400C/D/E
As of 450 size the frame length is unique and
there are 5 foot distances (L/A/B/C/D) to each
one. So frames are shown as:
HGF 450, HGF 500, HGF 560 and HGF 630
NEMA:
To 50, 58 and 68 sizes there are two frame
lengths available, with 3 foot distance each
one. So:
HGF 5006/7/8T and HGF 5009/10/11T
HGF 5807/8/9T and HGF 5810/11/12T
HGF 6806/7/8T and HGF 6809/10/11T
As of 7006/10 size the frame length is
unique and there are 5 foot distance to each
one. So frames are shown as:
HGF 7006/10, HGF 8006/10, HGF 8806/10 and
HGF
9606/10
Examples of Application
- Pulp and Paper
Customer: Cenibra
Country: Brazil
Products: 2 x 810 kW, 6
Poles, 4.0 kV
Application: Crusher
-Steel Industry
Customer:
International
Steel Group
Country: USA
Products: 6 x 800 HP, 8
Poles, 2.3 kV
Application:
Centrifugal
Pumps
Customer: Ebara Corporation (Japan)
Country: Tailand
Products: 4 x 290 kW, 4 Poles,
3.3 kV
Application: Centrifugal Pumps
- Mining
Customer: Ingersoll Dresser / Krupp Robins
Country: Chile
Products:
1 x 350 HP, 4 Poles, 400 V
1 x 450 HP, 4 Poles, 575 V
4 x 1400 HP, 4 Poles, 3.3 kV
Application: Conveyor Belts and
Pumps
WEG Equipamentos Elétricos S/A
Av. Prefeito Waldemar Grubba, 3000 - 89256-900 - Jaraguá do Sul - SC - Fone (47) 3276-4000 - Fax (47) 3276-4010 – www.weg.net
Standards
HGF Motors are designed according to the requirements of the following standards:
Title
IEC Market (other than Brazil)
Standard
Rotating electrical machines, rating and performance
Rotating electrical machines,
Methods for determining losses and efficiency
Dimensions and output series for rotating electrical machines
Terminal markings and direction of rotation for rotating electrical machines
Rotating electrical machines,
Symbols for types of construction and erection
Built-in thermal protection
Rotating electrical machines, methods of cooling
Rotating electrical machines, degrees of protection
Rotating electrical machines, mechanical vibrations
Rotating electrical machines, noise limits (1kW up to 5500kW)
Rotating electrical machines, starting performance of induction cage motors up
to 660V, 50Hz
IEC standard voltages
IEC EN 60034-1
IEC 60034-2
IEC 60072-1 e 2
IEC EN 60034-8
IEC EN 60034-7
IEC 60034-11
IEC EN 60034-6
IEC EN 60034-5
IEC 60034-14
IEC EN 60034-9
IEC EN 60034-12
IEC 60038
Brazilian Market
Máquinas Elétricas Girantes - Motores de Indução - Parte 1: Trifásicos
Máquinas Elétricas Girantes - Parte 1 Motores de Indução Trifásicos – Ensaios
Máquinas Elétricas Girantes - Motores de Indução - Marcação de Cabos
Terminais e Sentido de Rotação
Máquina elétrica girante - Dimensões e séries de potências para máquinas
elétricas girantes - Padronização - Parte 1: Designação de carcaças entre 56 a
400 e flanges entre e flanges entre 55 a 1 080
Máquina elétrica girante - Dimensões e séries de potências para máquinas
elétricas girantes - Padronização - Parte 2: Designação de carcaças entre 355
a 1 000 e flanges entre 1 180 a 2 360
Máquinas Elétricas Girantes - Limites de Ruído
Máquinas elétricas girantes - Graus de proteção proporcionados pelos
invólucros
Máquinas Elétricas Girantes - Classificação das Formas Construtivas e
Montagens
NBR 17094-1
NBR 5383-1
NBR 15367
NBR15623-1
NBR15623-2
NBR 7565
NBR IEC 60034-5
NBR 5031
NEMA Markets
Motors and Generators
NEMA MG1
Non-Sparking Motors
Brasil
Atmosferas Explosivas Parte 0: Equipamentos – Requisitos Gerais
Equipamentos Elétricos para Atmosferas Explosivas – Parte 15: Construção,
ensaio e marcação de equipamentos elétricos com tipo de proteção “n”
ABNT NBR IEC 600790
ABNT NBR IEC 6007915
IEC Market (other than Brazil)
Electrical Apparatus for Explosive Gas Atmospheres – Part 0: General
Requirements
Electrical Apparatus for Explosive Gas Atmospheres – Part 15: Type of
Protection “N”
IEC 60079-0
IEC 60079-15
API 541 Motors
Form-wound squirrel cage induction motors – 500 horsepower and larger
API 541
WEG Equipamentos Elétricos S/A
Av. Prefeito Waldemar Grubba, 3000 - 89256-900 - Jaraguá do Sul - SC - Fone (47) 3276-4000 - Fax (47) 3276-4010 – www.weg.net
Constructive Details
Enclosure
As standard, HGF Motors are totally enclosed
fan cooled machines (IC411), according to IEC
60034-6. They are of IM B3 mounting, following
IEC 60034-7. Flange and vertical mounted
versions are available as an option.
Brazilian Market
As standard, HGF Motors are totally enclosed
fan cooled machines (TFVE IC41), according to
ABNT NBR 5110. They are B3 mounted,
following ABNT NBR 5031-1, codification I,
Table 1. Flange and vertical mounted versions
are available as an option.
NEMA Market
As standard, HGF Motors are Totally
Enclosed Fan-Cooled Guarded Machines
(IC411) according to NEMA MG1, Part 1.
They are F1 mounted, as per NEMA MG1
Part 4. Flange and vertical mounted
versions are available as an option.
The frame and endshields are manufactured in
FC-200 cast iron. The frame has fins in the
axial direction providing high levels of
mechanical resistance and allowing for
maximum heat dissipation. Motor feet are
integral to the frame, assuring a rugged design.
Motors are fitted with automatic plastic drains
plugs (1) in the lowest part of the frame. The
drain holes are placed according to the
figures below, to horizontal and vertical
mountings.
(1)
Non-sparking Ex n motors are flitted with closed plastic
drain plugs. API 541 motors are supplied with closed
metallic
threaded
drain
plugs.
Drain positions for HGF Motors horizontal and vertical mounted
WEG Equipamentos Elétricos S/A
Av. Prefeito Waldemar Grubba, 3000 - 89256-900 - Jaraguá do Sul - SC - Fone (47) 3276-4000 - Fax (47) 3276-4010 – www.weg.net
The fastening and terminal box mounting bolts
are Class 8.8 (ISSO 898/1), zinc finished.
HGF in the API 541 version are supplied with
SAE 316 stainless steel fastening and terminal
box mounting bolts.
Grounding lugs are supplied in the motor feet
and are placed on both sides of frame. The
terminal boxes also have grounding lugs.
Non-sparking Ex n and API 541 motors are
supplied with an earthing strap connecting
terminal box and frame, as shown in the figure
below.
Earthing strap used in Ex n and API 541 motors.
Fan Cover
HGF motors of IEC frames 315L/A/B to
400C/D/E (NEMA 5006/07/08T to 6809/10/11T)
with anti-friction bearings without forced
ventilation are supplied with cast iron fan cover
to horizontal and vertical mounted motors as
show on the picture below.
400/C/D/E (NEMA 5808/09/10T a 6809/10/11T)
the air intake is of fabricated steel.
Note: It is recommended to fit drip cover to
outdoor vertical application cast iron fan cover
motors.
HGF Motors frames 450 to 630 (NEMA 7006/10
a 9606/10) and all motors fitted with sleeve
bearing are supplied with steel fabricated fan
covers, as shown on the picture below.
HGF Motor frame 315C/D/E (NEMA 5006/7/8)
HGF Motor frame 315L/A/B/ e 315 C/D/E
(NEMA 5006/07/08T e 5009/10/11T) does have
cast iron air intake on frames 355L/A/B to
Fabricated Steel fan cover for sleeve bearing motors
WEG Equipamentos Elétricos S/A
Av. Prefeito Waldemar Grubba, 3000 - 89256-900 - Jaraguá do Sul - SC - Fone (47) 3276-4000 - Fax (47) 3276-4010 – www.weg.net
Terminal Box
Main and auxiliaries terminal boxes of HGF
motors are manufactured in FC-200 cast iron
with adequate room for main and accessories
leads. They allow for 90° rotation. High Voltage
Main terminal boxes feature a pressure relief
device.
Low voltage motors are supplied with 6 leads,
allowing for direct on line (DOL) starting from
the power grid or through Star/Delta starting.
These leads may be mounted on a terminal
block, for an easier installation. This is the case
to the IEC market (except Brazil). The NEMA
market also does not have terminal block as a
standard feature.
Terminal block for low voltage motors (IEC)
Standard Cast-iron HGF main terminal box
NEMA market. Main and auxiliaries terminal
boxes of HGF motors are manufactured in FC200 cast iron with adequate room for main and
accessories leads. They allow for 90° rotation.
High Voltage Main terminal boxes feature a
pressure relief device. When motors are supplied
with connection pins the terminal box is
manufactured in welded steel (NEMA TYPE II).
The leads coming from the winding are split
onto two boxes: one main terminal box for
power connection and one auxiliary with two
segregated compartments for PT-100 and
space heater connections.
High voltage motors are supplied with 3 leads
and may be mounted in pins inside the terminal
block. On request, high voltage motors may
have an extra terminal box, mounted in the
opposite side of the main terminal box, to
accommodate the neutral point (star point).
Terminal block for high voltage motors (IEC)
Auxiliary Box with segregated compartments
NEMA TYPE II high voltage terminal box
WEG Equipamentos Elétricos S/A
Av. Prefeito Waldemar Grubba, 3000 - 89256-900 - Jaraguá do Sul - SC - Fone (47) 3276-4000 - Fax (47) 3276-4010 – www.weg.net
Stator Winding
The stator has, as standard, class F insulation
with 80K temperature rise, except when
otherwise stated.
Optionally, low voltage motors may be supplied
with Class H insulation with 80K temperature
rise. High voltage motors are supplied with
Class F insulation, and the Class H insulation
option is available on request.
phase temperature monitoring, and 1 set of
space heater.
Low voltage motors are random wound and, in
HGF 315L/A/B up to 450 (NEMA 5006/7/8T up
to 7006/10) frames are impregnated using the
Continuous Resin Flow system.
High voltage motors have pre-formed windings
and are impregnated using VPI system.
The windings of HGF motors are supplied, as
standard, with 2 sets of 3-wire PT-100 for each
Nameplate
HGF motors are supplied with a nameplate that carries performance data, according to the IEC 600341 requirements (Brazilian market follows ABNT NBR 17094-1 and NEMA market follows NEMA MG1).
Additional nameplates with accessories data are also supplied.
The nameplates are made of stainless steel SAE 304 and the information is laser engraved. The motor
serial number and manufacturing date are included in the main nameplate.
All nameplates are firmly fixed to cast iron parts (frame or auxiliary terminal box lid) by pins.
Main Nameplate
Nameplate example - Europe
Nameplate example – Brazil
Nameplate example - NEMA
WEG Equipamentos Elétricos S/A
Av. Prefeito Waldemar Grubba, 3000 - 89256-900 - Jaraguá do Sul - SC - Fone (47) 3276-4000 - Fax (47) 3276-4010 – www.weg.net
Accessories Nameplate
a) PT-100
Warning Nameplates
HGF motors with rated voltage above 1 kV are
supplied with a safety nameplate, warning
about high voltage presence.
Nameplate example - Winding PT-100
Nameplate example - Bearings PT-100
Warning nameplate used in high voltage motors
(Portuguese)
b) Space Heater
Nameplate example – Space Heater
Warning nameplate used in high voltage motors (English)
WEG Equipamentos Elétricos S/A
Av. Prefeito Waldemar Grubba, 3000 - 89256-900 - Jaraguá do Sul - SC - Fone (47) 3276-4000 - Fax (47) 3276-4010 – www.weg.net
Cooling System, Noise and Vibration
Level
Cooling System
As a standard feature, HGF motors are totally
enclosed fan cooled (IC411) according to IEC
60034-6.
The forced ventilation version (IC416) is
available as an option and the non-ventilated
(TENV) and Air Over (TEAO) versions are
available on request. More information about
the IC416 version can be found in the Variable
Frequency Drive section.
Brazilian Market
As a standard feature, HGF motors are totally
enclosed fan cooled (TFVE IC 41) following
ABNT NBR5110. The forced ventilation version
(IC416) is available as an option and the nonventilated (TENV) and Air Over (TEAO)
versions are available on request. More
information about the IC416 version can be
found in the Variable Frequency Drive section.
NEMA Market
As a standard feature, HGF motors are
totally enclosed fan cooled guarded
machines (IC411) following NEMA MG1 Part
1. The forced ventilation version (IC416) is
available as an option and the nonventilated (TENV) and Air Over (TEAO)
versions are available on request. More
information about the IC416 version can be
found in the Variable Frequency Drive
section.
Noise Level
The fans are manufactured in aluminum and
are unidirectional to 2 pole motors and
bidirectional for the other speeds.
Unidirectional motors must have their direction
of rotation defined on the Purchase Ordert.
The tables below show the sound pressure
levels in dB(A) scale measured during the HGF
motor operation at 50 and 60 Hz, fitted with
cast iron fan cover.
Frame
NEMA
Sound Pressure Levels
dB(A) to 50 Hz
2
4
6
8
poles poles poles poles
IEC
315L/A/B
5006/7/8T e
e
75
75
73
5009/10/11T
315C/D/E
355L/A/B
5807/8/9T e
e
82
79
77
5810/11/12T
355C/D/E
400L/A/B
6806/7/8T e
e
85
79
77
6809/10/11T
400C/D/E
Sound Pressure Levels 50Hz motors
Frame
NEMA
IEC
71
75
75
Sound Pressure Levels dB(A) to
60 Hz
2
4
6
8
poles
poles
poles
poles
315L/A/B e
315C/D/E
5006/7/8T e
5009/10/11T
79
79
77
75
355L/A/B e
355C/D/E
5807/8/9T e
5810/11/12T
86
83
81
79
400L/A/B e
400C/D/E
6806/7/8T e
6809/10/11T
89
83
81
79
Sound Pressure Levels 60Hz motors
WEG Equipamentos Elétricos S/A
Av. Prefeito Waldemar Grubba, 3000 - 89256-900 - Jaraguá do Sul - SC - Fone (47) 3276-4000 - Fax (47) 3276-4010 – www.weg.net
The tables below show the sound pressure
levels in dB(A) scale measured during the HGF
motor operation at 50 and 60 Hz, fitted steel
fabricated fan cover.
Frame
IEC
NEMA
315L/A/B
e
315C/D/E
355L/A/B
e
355C/D/E
400L/A/B
e
400C/D/E
450
500
560
630
5006/7/8T e
5009/10/11T
80
82
80
78
5807/8/9T e
5810/11/12T
82
85
82
80
6806/7/8T e
6809/10/11T
85
85
82
80
7006/10
88
88
82
8006/10
88
92
85
8806/10
88
92
88
9606/10
88
92
92
Sound Pressure Levels 50Hz motors
80
82
82
82
Frame
IEC
315L/A/B
e
315C/D/E
355L/A/B
e
355C/D/E
400L/A/B
e
400C/D/E
450
500
560
630
Sound Pressure Levels dB(A)
to 50 Hz
2
4
6
8
poles poles poles poles
NEMA
Notes:
1. These numbers apply to both 50 Hz and 60
Hz.
2. The sound pressure level is measured at
sinusoidal condition. The increase in the sound
pressure level at VFD varies with the switching
frequency. Anyway, it will be limited to 11
dB(A).
Sound Pressure Levels dB(A)
to 60 Hz
2
4
6
8
poles poles poles poles
5006/7/8T e
5009/10/11T
82
85
82
80
5807/8/9T e
5810/11/12T
86
88
85
82
6806/7/8T e
6809/10/11T
89
88
85
82
7006/10
92
92
88
8006/10
92
92
88
8806/10
92
92
92
9606/10
92
92
92
Sound Pressure Levels 60Hz motors
82
85
85
85
The figures above are for no-load condition.
Under load, the IEC 60034-9 standard defines
an increase in the Sound Power Levels as
shown below.
Shaft
Height H
2 poles
4 poles
6 poles
8 poles
(mm)
H = 315
2
3
5
6
355 ≤ H
2
2
4
5
Maximum power sound level increase under load
WEG Equipamentos Elétricos S/A
Av. Prefeito Waldemar Grubba, 3000 - 89256-900 - Jaraguá do Sul - SC - Fone (47) 3276-4000 - Fax (47) 3276-4010 – www.weg.net
Vibration Level
The vibration level of an electrical machine is
highly related to its installation and, therefore, it
is recommended to monitor the vibration levels
during the scheduled maintenances.
In order to evaluate the vibration of the motor
itself, it is necessary to test it uncoupled and to
follow the procedures described in IEC 6003414 standard (Brazilian market follows ABNT
NBR 11390 and NEMA MG1 Part 7).
For vibration monitoring the endshields HGF
motors have three M8 threaded holes where
vibration sensors can be installed. Optionally,
nipples can be supplied. The threaded holes
are positioned as shown in the figure below.
On request, the vibration sensors can be
supplied together with the motor.
The acceptable vibration levels are defined by
IEC 60034-14, to the uncoupled condition, and
are classified in levels A and B, as per the table
below:
Vibration
Level
A
B
Mounting
Displacement Velocity Acceleration
µm
mm/s
m/s2
Free
45
2.8
suspension
Rigid
37
2.3
mounting
Free
29
1.8
suspension
Rigid
24
1.5
mounting
Vibration Levels - IEC
4.4
3.6
Threaded holes position for vibration monitoring
2.8
2.4
Shaft Displacement Limits
The Level A applies to machines without
special vibration requirements. Level B applies
to
machines
with
special
vibration
requirements.
All rotors are dynamic balanced with half key
and complies, as standard, to the Level A (3).
Level B is available under special request.
(3) API 541 motors comply with vibration level B
Synchronous Rotational
Limiting
speed
Frequency vibration speed
zero-peak
[rpm]
[Hz]
[pol./s] [mm/s]
3600
60
0.15
3.8
1800
30
0.15
3.8
1200
900
720
20
15
12
0.15
0.12
0.09
3.8
3.0
2.3
600
10
0.08
2.0
According to IEC 60034-14 (Brazilian market
uses ABNT NBR 11390) the shaft displacement
measurement is only recommended to sleeve
bearing machines with nominal speed
in
excess of 1200 rpm and with rated output
above 1000 kW.
They are designed for proximity sensor
assembly and supplied with the API 541 motor
line as standard item. For other motor line,
contact WEG.
The sensor reading is influenced by mechanical
factors and magnetic interferences of the shaft,
generally designated as runout. The NEMA
MG1 standard specifies that the runout should
be measured at low speeds (100 to 400 rpm),
since the unbalanced forces are negligible in
this condition.
Vibration Levels – NEMA
WEG Equipamentos Elétricos S/A
Av. Prefeito Waldemar Grubba, 3000 - 89256-900 - Jaraguá do Sul - SC - Fone (47) 3276-4000 - Fax (47) 3276-4010 – www.weg.net
The limits of shaft vibration of standard
machines with sleeve bearing, considering the
electrical and mechanical runout shall not
exceed the limits below:
Maximum
displacement
Runout (µm)
relative to the (peak to peak)
shaft (µm)
> 1800
65
16
A
≤ 1800
90
23
> 1800
50
12.5
B
≤ 1800
65
16
Maximum displacement relative to the shaft
Vibration
Level
Speed
range
(rpm)
According to NEMA MG1, the vibration limits on
the motor shaft are only valid for machines
supplied with non-contact proximity sensors.
The table below shows the vibration limits for
standard and special machines.
Limits for Special Machines:
The limits of shaft vibration of rigidly mounted
special machines with sleeve bearing,
considering the electrical and mechanical
runout shall not exceed the limits below:
Synchronous
speed (rpm)
Maximum relative shaft
displacement
(peak to peak)
1801 – 3600
0.0020” (50µm)
1201 – 1800
0.0028” (70µm)
≤ 1200
0.0030” (75µm)
Maximum shaft displacement to special machines
So, for a good probe reading the shaft runout
shall not exceed 6.4µm peak-to-peak (0.0005
inch peak-to-peak), or 25% of the vibration
displacement limit, whichever is greater.
Limits for Standard Machines:
The limits of shaft vibration of standard
machines with sleeve bearing, considering the
electrical and mechanical runout shall not
exceed the limits below:
Synchronous speed
(rpm)
Maximum relative shaft
displacement
(peak to peak)
1801 – 3600
0.0028” (70µm)
≤ 1800
0.0035” (90µm)
Maximum shaft displacement to standard machines
WEG Equipamentos Elétricos S/A
Av. Prefeito Waldemar Grubba, 3000 - 89256-900 - Jaraguá do Sul - SC - Fone (47) 3276-4000 - Fax (47) 3276-4010 – www.weg.net
Shaft, Bearings and Loads
Shaft
The standard shaft material is AISI 4140 and
the dimensions are in accordance with IEC
60072 (Brazilian market uses ABNT NBR
15323 and NEMA market use NEMA MG1 Part
4). All HGF motors have shaft with threaded
center bore according to DIN 332 (NEMA
market use NEMA MG1 Part 4) to ease the
maintenance and load coupling services. The
dimensions can be found in the Mechanical
Section of this catalogue.
Motors with standard shaft dimensions are
supplied with type “C” key as per DIN 6885.
WEG can also supply, under special request,
HGF motors with special shaft dimensions
meeting customer requirements.
A second shaft end extension and other
materials can also be supplied on request. The
second shaft extension dimensions are shown
in the Mechanical Section.
HGF Bearing
HGF motors for vertical mounting can be
supplied
with
two
different
bearing
configurations: a standard version for low
thrust loads formed by an antifriction ball
bearing on drive end and an angular contact
ball bearing on non-drive end and another
version for high thrust loads formed by grease
lubricated ball bearings on drive end and oil
lubricated spherical roller thrust bearing on nondrive end, comprising an oil bath system with
natural cooling.
Bearings
Horizontal HGF Motors are supplied, as
standard, with anti-friction open ball bearing,
with clearance C3 up to frame size IEC 500
(NEMA 8006/10). For the frame sizes IEC 560
and 630 the drive end bearing is formed by a
roller and a ball bearing.
All grease lubricated bearings of the HGF motor
line are fitted with an efficient grease slinger
system that ensures lower bearing temperature
and better lubrication performance during motor
operation. The bearings are fitted with Pt100
temperature sensors that ensure continuous
temperature monitoring during the operation.
High Thrust HGF vertical motor
All motor are supplied with bearings with C3
clearance, however bearings with C4 clearance
are available on request.
The HGF motor with grease lubricated bearings
have a standard bearing lifetime L10 of 40,000
hours and the vertical mounted motors with oil
lubricated bearings for high thrust loads have a
bearing lifetime L10 of 12,000 hours. Different
bearing lifetimes L10 can be evaluated, on
request.
WEG Equipamentos Elétricos S/A
Av. Prefeito Waldemar Grubba, 3000 - 89256-900 - Jaraguá do Sul - SC - Fone (47) 3276-4000 - Fax (47) 3276-4010 – www.weg.net
thrust vertical
mounting
High
Horizontal Mounting with sleeve
bearings
HGF motors can also be supplied with sleeve
bearings, both drive end and non-drive end.
This bearing configuration ensures low
maintenance for severe operating conditions
with direct coupling application. The motors
have flange mounted sleeve bearings with the
mounting flange at one end of the housing.
315L/A/B
e
315C/D/E
355L/A/B
e
355C/D/E
400L/A/B
e
400C/D/E
5006/7/8T e
509/10/11T
4–8
6320
29320
-
5807/8/9T e
5810/11/12T
4–8
6322
29320
-
6806/7/8T e
6809/10/11T
4–8
6324
29320
-
450
7006/10
4–8
6328
29320
6328
2
9-80
9-80
9-80
9-90
9-90
9-90
315L/A/B
e
315C/D/E
355L/A/B
e
355C/D/E
400L/A/B
e
400C/D/E
5006/7/8T e
509/10/11T
4–8
5807/8/9T e
5810/11/12T
2
9-80
9-80
9-80
4–8
9-100
9-100
9-100
6806/7/8T e
6809/10/11T
2
9-80
9-80
9-80
4–8
11-110
11-110
11-110
450
7006/10
500
560
630
8006/10
8806/10
9606/10
2
4–8
4–8
4–8
4–8
9-80
11-125
11-125
9-80
11-110
11-125
*
11-125
11-125
*
Standard bearing configuration
*inquiry WEG
Sleeve Bearing
In the table below is possible to identify the
standard bearing size by frame size.
Frame
Normal thrust vertical
mounting
Horizontal Mounting
IEC
315L/A/B
e
315C/D/E
355L/A/B
e
355C/D/E
400L/A/B
e
400C/D/E
NEMA
5006/7/8T e
5009/10/11T
5807/8/9T e
5810/11/12T
6806/7/8T e
6809/10/11T
Bearing
Number
of poles
DE
NDE
2
6314
6314
NDE
API
6314
4–8
6320
6316
6320
2
6314
6314
6314
4–8
6322
6320
6322
2
6315
6315
6315
4–8
NU224
6320
*
6220
6328
6330
NU228 +
6228
6220
6322
6324
*
*
*
NU222
-
NU224
-
7314
-
450
7006/10
500
8006/10
2
4–8
4–8
560
8806/10
4–8
630
9606/10
4–8
315L/A/B
e
315C/D/E
5006/7/8T e
509/10/11T
2
NU232 +
6232
6314
4–8
6320
7316
-
2
6314
7314
-
4–8
6322
7319
-
6806/7/8T e
6809/10/11T
4–8
6324
7319
-
7006/10
8006/10
4–8
4–8
6328
6330
7322
7324
-
355L/A/B
e
355C/D/E
400L/A/B
e
400C/D/E
450
500
5807/8/9T e
5810/11/12T
Note: Motors in frame size IEC 400C/D/E
(NEMA 6809/10/11T) in 2 poles and vertical
mounted (normal thrust) are available under
special request.
As an option, horizontal mounted motors with
high radial loads can be supplied with NU
series roller bearings, as per the table below:
Frame
IEC
NEMA
315L/A/B
5006/7/8T e
e
5009/10/11T
315C/D/E
355L/A/B
5807/8/9T e
e
5810/11/12T
355C/D/E
400L/A/B
6806/7/8T e
e
6809/10/11T
400C/D/E
450
7006/10
500
8006/10
560 e
630
8806/10 e
9606/10
Number
of poles
Roller
bearing
DE
4–8
NU320
4–8
NU322
4–8
NU324
4–8
4–8
NU328
NU330
Under request
NU series roller bearings
WEG Equipamentos Elétricos S/A
Av. Prefeito Waldemar Grubba, 3000 - 89256-900 - Jaraguá do Sul - SC - Fone (47) 3276-4000 - Fax (47) 3276-4010 – www.weg.net
Insulated Bearing
Axial Locating Bearing configuration
In the standard configuration, HGF motors with
frame size up to IEC 500 (NEMA 8006/10),
when horizontal mounted, have anti-friction
drive end ball bearings axially located. When
vertical mounted, or when fitted with roller
bearing, the non-drive end bearing is located.
HGF motors in frames IEC 400L/A/B (NEMA
6806/7/8T) and above are supplied with
insulated non-drive end bearing as standard.
This avoids bearing damage due to shaft
circulation through the bearing. As an option,
insulated bearings can be supplied to 315L/A/B
a 355C/D/E (NEMA 5006/7/8T a 5807/8/9T.
As an option, vertical mounted motors can have
the drive end bearing located when the load
cannot receive any axial thrust.
HGF motors in frames IEC 560 and 630 (NEMA
8806/10
and
9606/10)
have
special
configuration. For more information, please get
in contact with the nearest WEG office.
Transport Locking
HGF motors are fitted with a mechanical
locking device to avoid bearing damage during
transport. This device must be used in any
motor transport after installation.
Insulated endshield
The set non-drive end bearing insulation and
drive end shaft brush however is mandatory to
the whole frame range when motors are VFD
driven. So, the VFD operation must always be
clearly informed on the quotation or on the
Purchase Order.
Locking device – rolling bearings
For Non-sparking Ex n motors the non-drive
end bearing is insulated regardless the VFD
operation, however they are not fitted with
grounding brush. The same rule applies to
Class 1 Div 2 motors according to NEMA MG1.
For API 541 motors, both bearings are
insulated as standard and the drive end side
receives an earthstrap.
Locking device – sleeve bearings
On vertical mount motors for high axial thrust or
motors fitted with sleeve bearing, the NDEbearing is always isolated.
WEG Equipamentos Elétricos S/A
Av. Prefeito Waldemar Grubba, 3000 - 89256-900 - Jaraguá do Sul - SC - Fone (47) 3276-4000 - Fax (47) 3276-4010 – www.weg.net
Lubrication – rolling bearings
The bearing lifetime depends on its type and
size, on the axial and radial thrusts applied to it,
the environment conditions (temperature and
cleanliness), speed and grease life. So, its
lifetime is highly linked to its correct application,
maintenance and lubrication. By respecting
grease quantity and lubrication intervals the
designed bearing lifetime can be achieved.
HGF motors are fitted with grease nipples in the
endshields for bearing lubrication. The grease
quantity and lubrication interval are specified on
the nameplate and are shown on the tables
below.
It is important to point out that lubrication in
excess may also result in an additional bearing
temperature during operation.
The 2-pole motors in frame size 450 (NEMA
7006/10) are supplied with automatic grease
dispensers. (in development)
The use of greases not recommended by WEG
can result in motor warranty void.
Frame
IEC
315L/A/B
e
315C/D/E
355L/A/B
e
355C/D/E
400L/A/B
e
400C/D/E
NEMA
Number
of poles
5006/7/8T e
5009/10/11T
2-8
5807/8/9T e
5810/11/12T
2-8
6806/7/8T e
6809/10/11T
2-8
Lubricant
Lubricant
specification
Polyrex
EM 103
Grease with
mineral oil and
polyureia
thickener, ISO
VG 115
Stamina
RLS2
Grease with
sintetic oil and
polyureia
thickener, ISO
VG 115
Staburags
N12MF
Grease with
sintetic oil and
Na thickener,
ISO VG 210
4–8
450
7006/10
500
560
8006/10
8806/10
630
9606/10
2
4–8
4–8
4–8
Standard lubricant information
Shell Tactic EMV system
Table below shows the standard greases and
their main lubricating characteristics. Other
compatible greases can be used in addition to
the indicated ones, as specified in the motor
manual.
The lubrication interval shown in the tables
below are calculated considering ambient
temperature of 40°C and bearing lifetime L10h
of 40.000 hours.
Important:
Operation in abnormal conditions, such as:
ambient temperature, altitude, axial or radial
loads above those indicated in the table below
will result in specific lubrication intervals,
different from those listed here.
WEG Equipamentos Elétricos S/A
Av. Prefeito Waldemar Grubba, 3000 - 89256-900 - Jaraguá do Sul - SC - Fone (47) 3276-4000 - Fax (47) 3276-4010 – www.weg.net
Lubrication Interval – rolling bearings
Frame
IEC
Horizontal Mounting
315L/A/B
e
315C/D/E
355L/A/B
e
355C/D/E
400L/A/B
e 400
C/D/E
5807/8/9T e
5810/11/12T
6806/7/8T e
6809/10/11T
7006/10
500
8006/10
630
Normal thrust vertical mounting
5006/7/8T e
5009/10/11T
450
560
Horizontal Mounting – Roller bearings
NEMA
315L/A/B
e
315C/D/E
355L/A/B
e
355C/D/E
400L/A/B
e 400
C/D/E
8806/10
9606/10
5006/7/8T e
5009/10/11T
5807/8/9T e
5810/11/12T
6806/7/8T e
6809/10/11T
450
7006/10
500
8006/10
315L/A/B
e
315C/D/E
5006/7/8T e
5009/10/11T
355L/A/B
e
355C/D/E
400L/A/B
e 400
C/D/E
5807/8/9T e
5810/11/12T
6806/7/8T e
6809/10/11T
450
7006/10
500
8006/10
50Hz
60Hz
Number
of poles
Bear.
Grease
(g)
(h)
(h)
2
6314
27
3100
4–8
6320
50
2
6314
4–8
2
50Hz
60Hz
Bear.
Grease
(g)
(h)
(h)
2100
6314
27
3100
2100
4500
4500
6316
34
4500
4500
27
3100
2100
6314
27
3100
2100
6322
60
4500
4500
6319
45
4500
4500
6315
30
2700
1800
6315
30
2700
1800
4–8
6324
72
4500
4500
6319
45
4500
4500
2
4
6–8
4
6–8
4
6220
31
2500
6220
31
3000
1800
6328
93
4500
6322
60
4500
4500
6330
104
6324
72
4500
4500
NU22
8+
6228
NU23
2+
6232
6314
75
1400
3300
4500
2800
4500
1600
4300
3000
4500
4500
3700
2400
4500
4500
1700
4500
4500
1700
4500
4500
4500
4500
4500
3500
4500
4500
3100
4500
4500
1200
4500
4500
1200
3600
4500
3600
4500
4500
2700
4500
4500
2200
4200
4500
6–8
4
6
8
2
4
6–8
2
4
6–8
4
6
8
4
6
8
4
6
8
4
6–8
4
6–8
4
6–8
4
6
8
4
6
8
4200
4500
2600
106
4500
4500
92
120
140
27
1800
4300
4500
1700
4200
4500
1700
3600
4500
3200
4500
4500
2400
4100
4500
2100
3800
4500
1000
3100
4500
1200
3200
4500
1200
2700
4500
2300
4300
4500
1700
3500
4500
1300
3100
4200
4300
2900
4500
4500
3500
2200
4500
4500
2900
1800
4500
4500
2000
4500
4500
1700
4100
4500
1400
3200
4500
1000
2900
4500
6320
50
6314
27
6322
60
6324
72
6328
93
6330
104
NU32
0
50
NU32
2
60
NU32
4
72
NU32
8
93
NU33
0
104
NU222
31
NU224
43
7314
27
7316
34
7314
27
7319
45
7319
45
7322
60
7324
72
Contact WEG
Lubrication Interval – rolling bearings
WEG Equipamentos Elétricos S/A
Av. Prefeito Waldemar Grubba, 3000 - 89256-900 - Jaraguá do Sul - SC - Fone (47) 3276-4000 - Fax (47) 3276-4010 – www.weg.net
Lubrication – Vertical mounting for high
axial thrust
Lubrication – Sleeve bearing
Motors for vertical mounting, subjected to high
axial thrust, and thus generating high bearing
temperatures require oil lubrication in order to
ensure proper oil film and heat dissipation.
As standard, the non-drive end bearing of the
WEG motors is designed for oil bath lubrication
system.
As option these motors can be supplied with
sleeve bearing. Sleeve bearings require less
maintenance with longer lubrication intervals
and ensure longer bearing lifetime, provided
these motors are applied correctly and the
recommended lubricants are used.
5006/7/8T e
5009/10/11T
4500
4500
3600
2700
4500
4500
3200
2300
4500
4300
8
4500
4500
4
2400
1700
4100
4500
3500
4500
6
6320
8
4
5807/8/9T e
5810/11/12T
400L/A/B
e
400C/D/E
6806/7/8T e
6809/10/11T
6
6322
29320
20
7006/10
6
6
8
6324
6328
8000
8006/10
FUCHS
Renolin
DTA 10
Mineral oil
ISO VG32
with anti
foaming and
antioxidant
FUCHS
Renolin
DTA 15
Mineral oil
ISO VG46
with anti
foaming and
antioxidant
2.8
4.7
Lubrication interval – Sleeve bearings
29320
26
29320
37
29320
45
8
4
500
Oil Qty (L)
(h)
3200
50Hz
e
60Hz
(h)
7006/10
5006/7/8
Te
5009/10/
11T
5807/8/9
Te
5810/11/
12T
6806/7/8
e
6809/10/
11T
7006/10
2.8
8000
(h)
4200
4
Oil Qty (L)
60Hz
Thrust
Bearing
Bearing
50Hz
NEMA
355L/A/B
e
355C/D/E
450
Poles
7006/10
4–8
Standard lubricant information
450
315L/A/B
e
315C/D/
E
355L/A/B
e
355C/D/
E
400L/A/B
e
400C/D/
E
450
Bearing
4–8
9-80
6806/7/8T e
6809/10/11T
Lubricant
spec.
9-90
4–8
9-100
5807/8/9T e
5810/11/12T
NEMA
5006/7/8
Te
5009/10/
11T
5807/8/9
Te
5810/11/
12T
6806/7/8
e
6809/10/
11T
Lub.
8000
Vertical High thrust bearings
IEC
FUCHS
Renolin
DTA 40 /
Mobil SHC
629
Mineral oil
ISO VG32
with anti
foaming
and
antioxidant
IEC
315L/A/B
e
315C/D/
E
355L/A/B
e
355C/D/
E
400L/A/B
e
400C/D/
E
50
e
60
Hz
(h)
11-110
4–8
Frame
11-125
5006/7/8T e
5009/10/11T
Frame
315L/A/B
e
315C/D/E
Lubricant
specification
2
315L/A/B
e
315C/D/E
355L/A/B
e
355C/D/E
400L/A/B
e 400
C/D/E
450
Lubricant
Number
of poles
NEMA
Sleeve Bearings
Frame
IEC
Poles
The drive end bearing is grease lubricated and
follows the same recommendations of the item
above, since they have only the radial guide
function.
4, 6 e 8
Table below gives information about the oil type
to be used, as well as specifies the lubrication
intervals by considering the axial loads.
The table below shows the available frame
sizes as well as gives information about the
type and amount of oil to be used and the
recommended lubrication intervals.
Lubrication interval – high thrust bearings
WEG Equipamentos Elétricos S/A
Av. Prefeito Waldemar Grubba, 3000 - 89256-900 - Jaraguá do Sul - SC - Fone (47) 3276-4000 - Fax (47) 3276-4010 – www.weg.net
Maximum applicable shaft loads
The maximum applicable radial and axial loads
to the standard configuration are shown in the
tables below. They consider bearing lifetime
L10h of 40.000 hours. The maximum radial
load figures consider axial load as void. Also,
the maximum axial load figures consider radial
load as zero. Contact WEG for combined axial
and radial loads bearing lifetime.
It is still considered in the maximum loads
determination:
1. Normal operational conditions;
2. AISI shaft material;
3. 2-pole motors: parabolic torque load
(examples are fans, exhausts, centrifugal
pumps, centrifugal compressors, mixers, etc);
4. Other than 2-pole motors: constant torque
load (reciprocating compressors, hoists,
cranes, reciprocating pumps, conveyor belts,
etc)
5. If there is any doubt about load torque
requirements, please get in contact with the
nearest WEG office.
6. The figures consider anti-friction ball
bearings, standard for horizontal mounted
motors up to IEC 500 (NEMA 8006/10).
Radial Loads
The load values indicated on the tables below
show maximum loads considering the load
being applied by the end of the shaft extension
(L) and on half of (L/2).
Radial load on shaft end
50Hz – Fr in kN
2
4
6
8
Frame
poles poles poles poles
IEC
NEMA
L/2 L L/2 L L/2 L L/2 L
315L/A/B
5006/7/8T e
e
2 2 6 5 6 6 7 7
5009/10/11T
315C/D/E
355L/A/B
5807/8/9T e
e
1 1 5 5 7 6 7 7
5810/11/12T
355C/D/E
400L/A/B
6806/7/8 e
e
- 6 5 7 7 8 8
6809/10/11T
400C/D/E
450
7006/10
- 7 7 9 8 9 9
500
8006/10
- 8 7 9 9 10 9
Maximum radial load to ball bearings (no axial thrust)
60Hz – Fr in kN
2
4
Frame
poles poles
L/
L/
IEC
NEMA
L
L
2
2
315L/A/B
5006/7/8T e
e
5009/10/11
2 2 5 5
315C/D/
T
E
355L/A/B
5807/8/9T e
e
5810/11/12
1 1 5 4
355C/D/
T
E
400L/A/B
6806/7/8 e
e
6809/10/11
- 5 5
400C/D/
T
E
450
7006/10
- 7 6
500
8006/10
-
-
7
6
6
8 poles
poles
L/
L/
L
L
2
2
6
5
7
6
6
4
7
6
6
6
8
6
8
8
9
9
8 10
9
1
0
Maximum radial load to ball bearings (no axial thrust)
WEG Equipamentos Elétricos S/A
Av. Prefeito Waldemar Grubba, 3000 - 89256-900 - Jaraguá do Sul - SC - Fone (47) 3276-4000 - Fax (47) 3276-4010 – www.weg.net
Axial Thrusts – Horizontal mounting
50Hz – Fr in kN
Frame
4 poles 6 poles 8 poles
IEC
NEMA
L/2 L L/2 L L/2 L
315L/A/B
5006/7/8T e
e
25 12 25 12 25 12
5009/10/11T
315C/D/E
355L/A/B
5807/8/9T e
e
28 14 18 7 17 7
5810/11/12T
355C/D/E
400L/A/B
6806/7/8 e
e
32 16 20 8 17 8
6809/10/11T
400C/D/E
450
7006/10
35 23 35 23 25 10
500
8006/10
33 21 38 14 37 14
Maximum radial load to roller bearings (no axial thrust)
The maximum axial thrusts applicable in the
shaft end (in kN) of horizontal mounted motors
are presented in the table below.
Maximum Axial Thrust in the Shaft End
Frame
Poles
IEC
NEMA
Horizontal
mounting
Horizontal
Mounting
(Ball
bearings)
Pulling or
Pushing
(kN)
60Hz – Fr em kN
Frame
4 poles 6 poles 8 poles
IEC
NEMA
L/2 L L/2 L L/2 L
315L/A/B
5006/7/8T e
e
25 12 25 12 25 12
5009/10/11T
315C/D/E
355L/A/B
5807/8/9T e
e
30 15 20 8 19 7
5810/11/12T
355C/D/E
400L/A/B
6806/7/8 e
e
32 16 23 12 19 8
6809/10/11T
400C/D/E
450
7006/10
33 22 24 9 24 9
500
8006/10
26 17 21 17 21 17
Maximum radial load to roller bearings (no axial thrust)
Notes:
1. Roller bearings require a minimum
radial load to operate satisfactorily.
They are not recommended for direct
coupling.
2. 50 Hz motors with outputs above
590kW 4P, 515kW 6P and 400kW 8P
require application analysis.
3. 60 Hz Motors with outputs above
700kW 4P, 560kW 6P and 480kW 8P
require application analysis.
315L/A/B
e
315C/D/E
355L/A/B
e
355C/D/E
400L/A/B
e
400C/D/E
450
500
5006/7/8T e
5009/10/11T
5807/8/9T e
5810/11/12T
6806/7/8 e
6809/10/11T
2
2
4
5
6
6
8
7
2
1,7
4
6
6
7
8
7,5
2
1,7
4
6
6
7
8
7,5
2
1
4
5
6
6
8
7
4
5
6
6
8
7
7006/10
8006/10
Maximum axial thrust applicable to horizontal mounted
HGF motors
WEG Equipamentos Elétricos S/A
Av. Prefeito Waldemar Grubba, 3000 - 89256-900 - Jaraguá do Sul - SC - Fone (47) 3276-4000 - Fax (47) 3276-4010 – www.weg.net
Axial Thrusts – Vertical mounting
HGF motors when vertical mounted can be
supplied in two different versions: Normal and
High Thrust. This classification differentiates
them relating to maximum axial load applicable
in their shaft end.
Normal Thrust
This is the basic version with angular contact
ball bearings. The thrust bearing is assembled
on the non-drive end side and the maximum
axial thrust is shown in the table below.
Maximum Axial Thrust in the Shaft End
Frame
IEC
Pulling Momentaneous
(kN)
pushing (kN)
NEMA
2
*
*
315L/A/B
5006/7/8T e 4
e
5009/10/11T 6
315C/D/E
8
8
5
8
6
8
6
2
*
*
355L/A/B
5807/8/9T e 4
e
5810/11/12T 6
355C/D/E
8
9
6
9
7
9
7
2
400L/A/B
6806/7/8 e 4
e
6809/10/11T 6
400C/D/E
8
450
500
7006/10
8006/10
*
*
10
7
10
7,5
10
7,5
2
*
*
4
8
7
6
8
7
8
8
7
4
6
5
6
6
5
8
6
5
Maximum axial thrust applicable to HGF Normal Thrust
motors
(*) inquiry WEG
High Thrust
The version for high axial thrust is available for
motor up to 1800 rpm (4 poles - 60Hz).
The NDE-bearing lubricated by oil bath has
been designed to provide a simple and rugged
system with better thermal performance
resulting
in
lower
bearing
operating
temperatures in severe application conditions.
Different from the above described applications,
the standard bearing lifetimes is 12,000 hours.
Optionally this version can be supplied with
non-reverse ratchet system.
The table below shows the maxim allowed axial
thrusts per frame size.
Frame
IEC
NEMA
Maximum continuous downthrust
1800 RPM 1200 RPM
900 RPM
kN
lbf
kN
lbf
kN
lbf
315L/A/B
5006/7/8T e
e
40
5009/10/11T
315C/D/E
8816
50
11020
55
12122
355L/A/B
5807/8/9T e
e
45
5810/11/12T
355C/D/E
9918
55
12122
60
13224
400L/A/B
6806/7/8T e
e
6809/10/11T 50 11020
400C/D/E
60
13224
65
14326
450
7006/10
- maximum momentaneous uptrhust is 30% of maximum pulling
- all bearings are natural cooled
- for higher loads/speeds inquiry WEG
- motors that run with low downthrusts have higher vibration
To increase the bearing life time (12,000h),
divide the maximum axial thrust values by the
derating factors shown in table below
In case of different lifetimes or higher axial
loads than allowed, please contact WEG.
Thrust derating factors
L10h
Life in
Life
years
Factor
12000
1,5
1
17600
2
1,1
22000
2,5
1,17
26400
3
1,25
32500
4
1,32
40000
4,5
1,4
WEG Equipamentos Elétricos S/A
Av. Prefeito Waldemar Grubba, 3000 - 89256-900 - Jaraguá do Sul - SC - Fone (47) 3276-4000 - Fax (47) 3276-4010 – www.weg.net
Mounting
HGF mounting follows IEC 60034-7 standard. Basic and other mounting types can be seen in the figure
below. After the designation a letter is used to define the terminal box position. Therefore, the IM B3
mounting is expressed in the WEG documentation as (without IM code):
Mountings
European, Latin American and Australian
markets: The terminal box position is defined
looking to the motor shaft end.
NEMA Motors: HGF mounting codification
follows NEMA MG1 Part 4.
B3R(E) – terminal box in the left hand side.
B3L(D) – terminal box in the right hand side.
B3T – terminal box mounted in the top of the frame.
For NEMA market documents the information
about mounting will be as fallowing:
African market: The terminal box position is
defined looking it from the non-drive end side
B3R(D) – terminal box in the right hand side.
B3L(E) – terminal box in the left hand side.
B3T – terminal box in the top of the frame.
Brazilian market: the HGF mounting codification
follows ABNT NBR 5031-1, codification I Table
1 (horizontal mounted motors) and Table 2
(vertical mounted motors). After the code a
letter is used to define terminal box position, as
per Table 3 of the same standard.
Norma NEMA
F-1
F-2
F-3
W-1
W-2
W-3
W-4
W-5
W-6
W-7
W-8
W-9
W-10
W-11
W-12
C-1
C-2
C-3
Norma Europa
B3L
B3R
B3T
B7R
B6L
B7L
B6R
V6R
V5L
V5R
V6R
B6T
B7T
V6T
V5T
B8R
B8L
B8T
Norma WEG
B3D
B3E
B3T
B7E
B6D
B7D
B6E
V6E
V5D
V5E
V6D
B6T
B7T
V6T
V5T
B8E
B8D
B8T
Proposta HGF NEMA
F-1 / B3R(D)
F-2 / B3L(E)
F-3 / B3T
W-1 / B7L(E)
W-2 / B6R(D)
W-3 / B7R(D)
W-4 / B6L(E)
W-5 / V6L(E)
W-6 / V5R(D)
W-7 / V5L(E)
W-8 / V6L(E)
W-9 / B6T
W-10 / B7T
W-11 / V6T
W-12 / V5T
C-1 / B8L(E)
C-2 / B8R(D)
C-3 / B8T
WEG Equipamentos Elétricos S/A
Av. Prefeito Waldemar Grubba, 3000 - 89256-900 - Jaraguá do Sul - SC - Fone (47) 3276-4000 - Fax (47) 3276-4010 – www.weg.net
Degree of Protection and Painting
Degree of Protection
HGF motors are supplied with Labyrinth
Taconite in both endshields, providing IP55
protection degree as per IEC 60034-5 (Brazilian
market uses ABNT NBR IEC 60034-5 and
NEMA market uses NEMA MG1 Part 5) to
motor enclosure. This means that:
a) First digit - 5 – Dust protected machine.
Protected against contacts with or approach to
live or moving parts inside the enclosure.
Ingress of dust is not totally prevented but dust
does not enter in sufficient quantity to interfere
with satisfactorily operation of the machine.
b) Second digit - 5 – Machine protected against
water jets. Water projected by a nozzle against
the machine from any direction shall have no
harmful effect.
Motors have, as standard, drain holes fitted
with plugs in the lowest part of the frame,
respecting its mounting position.
Other Degree of Protection
HGF motors can be supplied to suit different
degree of protection requirements:
• IP55W for a better outdoor protection;
• IP56 for a better protection against
water;
• IP65 for a better protection against
dust.
• IP66 for better dust and water
protection
Paint
HGF motors of frame sizes up to IEC 400C/D/E
(NEMA 6809/10/11T) are painted according to
214P painting plan (WEG code).
This painting plan withstands as a minimum
1000 (one thousand) hours salt spray test
according to ASTM B 117/03 and can be
exposed to severe indoor and outdoor industrial
environments, containing SO2, vapor and solid
contaminants, high humidity and alkalis and
solvents splashes.
HGF motors in frames IEC 450 (NEMA
7006/10) and above are painted according to
212P painting plan (WEG code).
This painting plan withstands as a minimum
3000 (three thousand) hours salt spray test
according to ASTM B 117/03 and can be
exposed to indoor and outdoor harsh marine
and industrial marine environments containing
high humidity. This painting plan is indicate to
pulp and paper, mining, and petrochemical
industries. It fulfils Petrobras Standard N 1735
condition 4.
The painting plans description and other
options are shown below:
214P painting plan - standard up to IEC
400C/D/E (NEMA 6809/10/11T)
Primer: one coat with 75 to 105 mm epoxy paint
Finishing: one coat with 70 to 100 mm
polyurethane paint
212P painting plan - standard from IEC 450
(NEMA 7006/10) and up
Primer: one coat with 75 to 105 mm epoxy paint
Intermediate: one coat with 100 to 140µ epoxy
paint
Finishing: one coat with 70 to 100 mm
polyurethane paint
As an option the following painting plans can be
supplied:
212E painting plan (WEG code).
This painting plan withstands as a minimum
3000 (three thousand) hours salt spray test
according to ASTM B 117/03 and is suitable to
indoor harsh marine or industrial marine
environments, containing high humidity and
alkalis and solvents splashes. This painting
plan is indicate to pulp and paper, mining, and
petrochemical industries. It meets Petrobras
Standard N 1735 condition 4.
Primer: one coat with 75 to 105 mm epoxy paint
WEG Equipamentos Elétricos S/A
Av. Prefeito Waldemar Grubba, 3000 - 89256-900 - Jaraguá do Sul - SC - Fone (47) 3276-4000 - Fax (47) 3276-4010 – www.weg.net
Intermediate: one coat with 100 to 140µ epoxy
paint
Finishing: one coat with 100 to 140 mm epoxy
paint
213E painting plan (WEG code).
This painting plan withstands as a minimum
3000 (three thousand) hours salt spray test
according to ASTM B 117/03 and is suitable to
indoor or outdoor harsh marine or industrial
marine environments, containing high humidity.
This painting plan is indicated to off-shore oil
platforms. It meets Petrobras Standard N1374
condition 5.2.
Primer: one coat with 65 to 90 mm silicate ethyl
paint
Intermediate: one coat with 35 to 50 µm epoxy
paint
Finishing: one coat with 240 to 340 mm
polyurethane paint
Tropic-proof Painting
High humidity can result in premature insulation
system deterioration which is the main
component that ensures motor life time. Any
ambient with up to 95% of relative humidity
does not require additional protection, other
than
space
heaters
to
avoid
water
condensation inside the motor.
However, for any ambient with relative humidity
above 95%, an epoxy painting is applied on all
inside motor components which is known as
tropic-proof painting.
Voltage / Frequency
As per IEC 60034-1 (IEC markets) and ABNT
NBR
17904-1
(Brazilian
market)
the
combination of voltage and frequency variations
are classified as Zone A or Zone B, as per
figure below.
Rated voltage and frequency limits for electric motors
The motor must be suitable to perform its main
function (supply torque) continuously at Zone A.
However, this motor may not fully meet its
performance characteristics due to power
supply voltage and frequency variation, which
can result in temperature rise above the rated
value.
The motor must also be suitable to perform its
main function (supply torque) at Zone B.
However, the performance characteristic
changes will be bigger than those operating at
Zone A. The temperature rise will also be
higher than that of rated voltage and frequency
and that operating at Zone A. Long operation
near Zone B is not recommended.
WEG Equipamentos Elétricos S/A
Av. Prefeito Waldemar Grubba, 3000 - 89256-900 - Jaraguá do Sul - SC - Fone (47) 3276-4000 - Fax (47) 3276-4010 – www.weg.net
Ambient x Insulation
HGF motors are designed to operate in the
ambient temperatures range of -20°C of +40°C
and in altitudes of up to 1000 (one thousand)
meters above sea level. Also they can be
designed to different ambient temperatures and
altitudes. In such cases, the following
recommendations must be observed:
a) Ambient temperatures below -20° C:
contact WEG.
b) Ambient temperatures above 40° C:
the derating factors (table below) are
applicable.
c) Altitudes above 1000 meters above
sea level: the derating factors (table
below) are applicable.
d)Combination
of
ambient
temperatures
and
altitudes:
the
derating factors (table below) are
applicable.
Thermal Gap
25°C
Hottest – coldest point
10°C
Temperature Rise
80K
Ambient temperature
40°C
155°C
material
class
limit
Overheating must be avoided to ensure a
longer motor lifetime and a safe operation so,
the most common protection devices to electric
motors are temperature sensitive.
HGF motors are equipped, as standard, with 2
sets of 3-wire PT-100 in each phase and 1 set
3-wirePT-100 in each bearing.
Pt100
These are temperature detectors with operating
principle based on the properties that some
materials vary the electric resistance with the
temperature variation (usually platinum, nickel
or copper). They are also fitted with calibrated
resistance that varies linearly with the
temperature, allowing continuous monitoring of
motor heating process through a monitoring
display, with high precision rate and response
sensitivity. The same detector can serve as
alarm (with operation above the regular
operating temperature) and tripping (usually set
up for the maximum temperature of the
insulation class).
Derating factors for ambient temperature and altitudes
Motor Protection
The temperature inside the enclosure of an
electric machine increases during operation.
The temperature rise is defined at the design
stage and, normally is kept within the limits of B
temperature rise, which means 80 K. The
ambient temperature considered in the design
is 40°C, according to IEC 60034-1 (Brazilian
market uses ABNT NBR 17094 and NEMA
market uses NEMA MG1) and the insulation
material is normally rated Class F (155°C) –
see table below.
Other control temperature devices are shown
below.
Thermistors (PTC)
These are thermal protectors consisting of
semiconductor detectors with sudden variation
of the resistance when reaching certain
temperature. PTC is considered a thermistor
with the resistance increasing drastically to a
well defined temperature figure. This sudden
resistance variation blocks the PTC current,
making the output relay to operate, then
causing the main circuit to switch-off. The
thermistors are offered in different sizes; they
are not affected mechanically and have a
quicker
WEG Equipamentos Elétricos S/A
Av. Prefeito Waldemar Grubba, 3000 - 89256-900 - Jaraguá do Sul - SC - Fone (47) 3276-4000 - Fax (47) 3276-4010 – www.weg.net
response if compared to other protectors,
although they do not allow continuous
monitoring of the motor heating process.
Together with their electronic circuits, these
thermistors provide full protection against
overheating caused by single phase, overload,
under or overvoltage or frequent reversing
operations. When thermistors are used for
either alarm or tripping, they will require two
series-connected thermistors per phase.
WEG Automation has a product called RPW
which is an electronic relay intended specifically
to read the PTC signal and operate its output
relay. For more information check site
www.weg.net.
Bimetallic Thermal Protectors
These are silver-contact thermal protectors,
normally closed, that operate at certain
temperature
rise.
When
temperature
decreases, it goes back to the original position
instantaneously, allowing the silver contact to
close again. The bimetallic thermal protectors
are series-connected with the contactor coil,
and they can be used either as alarm or
tripping.
Variable Frequency Drive Application
Consideration regarding Rated Voltage
HGF windings, when supplied to VFD
operation, respect the limits shown in the table
below.
Low Voltage Motors
Motor rated
voltage
Peak
voltage on
motor
terminals
(phase to
phase)
dV/dt(*)
on motor
terminals
Rise
Time*
(phase to
phase)
≤ 5200
VNOM ≤ 460 V
≤ 1600 V
V/µs
≤ 6500
460 V < VNOM ≤
≤ 1800 V
≥ 0,1 µs
575 V
V/µs
≤ 7800
575 V < VNOM ≤
≤ 2200 V
690 V
V/µs
Low Voltage Motors VFD driven criteria
Time
between
consecutive
pulses
High Voltage Motors
The limits to high voltage HGF motors are
shown in the table below, which demonstrates
DOL and VFD driven (with reinforced
insulation) capabilities.
Coil insulation
(phase to phase
Motor
rated
voltage
Main insulation
(phase to ground)
Source Type
Peak
voltage
on motor
terminals
dV/dt(*)
Peak
dV/dt(*)
on
voltage
on
motor
on motor
motor
terminals terminals terminals
690 V <
VNOM ≤
4160 V
Power Grid
≤ 5900 V
≤ 500
V/µs
≤ 3400 V
≤ 500
V/µs
PWM (**)
≤ 9300 V
≤ 2700
V/µs
≤ 5400 V
≤ 2700
V/µs
4160 V
< VNOM
≤ 6600
V
Power Grid
≤ 9300 V
≤ 500
V/µs
≤ 5400 V
≤ 500
V/µs
≤ 1500
≤ 12700
≤ 7400 V
V
V/µs
High voltage HGF motors criteria
PWM (**)
* Definition according NEMA MG1 – Part 30.
** Reinforced insulation for VFD operation.
Notes to low and high voltage motors:
1. The switching frequency must be
limited to 5 kHz. Switching frequencies
above that accelerate the winding
aging process and potentially damage
the bearings.
2. If one of the above conditions is not
followed accordingly (including the
switching frequency), filter must be
installed on VFD outlet.
3. The criteria listed below were extracted
from IEC 60034-17 and IEC 60034-25
standards.
≥ 6 µs
* Definition according NEMA MG1 – Part 30.
WEG Equipamentos Elétricos S/A
Av. Prefeito Waldemar Grubba, 3000 - 89256-900 - Jaraguá do Sul - SC - Fone (47) 3276-4000 - Fax (47) 3276-4010 – www.weg.net
≤ 1500
V/µs
Torque restrictions on VFD application
The motor temperature rise on VFD application
will be higher compared to a motor feed directly
on the line, specially on low speeds, when the
motor cooling capacity is lowered. This
restriction can be overpassed by using an
forced ventilation unit. This unit will ensure a
constant air flow over the motor, even on lower
motor speeds.
Derating to limit temperature rise at sinusoidal source
level **
D
[TR] - Torque Aplicável (p.u.)
fluxo constante
V/f constante
0.95
I
B
0.90
H
0.85
APPLY THIS
EQUATION
F
0.10 ≤ f/fn < 0.25
TR = (f/fn) + 0.50
G
0.25 ≤ f/fn < 0.50
TR = 0.40(f/fn) + 0.65
H
0.50 ≤ f/fn < 0.83
TR = 0.30(f/fn) + 0.70
I
0.83 ≤ f/fn ≤ 1.0
TR = 0.95
(**)When lower curve is used (blue color), the
motor temperature rise of variable frequency
drive will be the same driven by sinusoidal
source. In other words, class F insulation
motors with class B temperature rise will remain
with class B temperature rise(• 80 K) even
when driven by variable frequency drive.
1.05
C
LIMITED BY
J
f/fn > 1.0
TR = 0.95 / (f/fn)
Derating to limit temperature rise at sinusoidal source level
It is possible though to operate a TEFC motor
with VFD IF the loads limits shown on the table
below are respected:
1.00
INTERVAL
E
0.80
Note: The derating curves given in figure 31 are
related to temperature on motor winding and
with thermal class. These curves do not foresee
thermal tolerance factor of the motors. It is
intended to show the torque limitations for
variable frequency drive motors.
G
A
0.75
J
0.70
F
0.65
0.60
0.55
0.50
0.0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1.0
1.1
1.2
1.3
1.4
1.5
1.6
[f/fn] - Freqüência (p.u.)
para ∆T = 105 K
para ∆T = 80 K
Torque derating curve
Derating factors to limit temperature rise at insulation material
class level *
INTERVAL
LIMITED BY
A
0.10 ≤ f/fn < 0.25
TR = (f/fn) + 0.60
B
0.25 ≤ f/fn < 0.50
TR = 0.40(f/fn) + 0.75
C
0.50 ≤ f/fn < 0.83
TR = 0.15(f/fn) + 0.87
D
0.83 ≤ f/fn ≤ 1.0
TR = 1.0
E
APPLY THIS EQUATION
f/fn > 1.0
TR = 1/(f/fn) = fn/f
Derating factor for insulation class level
Restrictions regarding bearing current
circulation
As already described on this document, at VFD
the non-drive end bearing must be insulated
and an earthing brush be installed in the drive
end bearings to avoid current circulation
through the bearings.
Restriction regarding mechanical speed
HGF motors, VFD or DOL driven shall not
exceed 120% of synchronous speed.
(*) When top curve is used (Green color), motor
temperature rise will be limited by the
temperature class of the insulation material. For
example, for class F insulation motors, the
temperature rise will be limited at 105K. This
curve can only be used for class F insulation
and B temperature rise motors in order to.
WEG Equipamentos Elétricos S/A
Av. Prefeito Waldemar Grubba, 3000 - 89256-900 - Jaraguá do Sul - SC - Fone (47) 3276-4000 - Fax (47) 3276-4010 – www.weg.net
Forced Ventilation Unit
For those cases where independent cooling is
required, the HGF motors can be supplied with
a forced ventilation unit, as shown in the figures
below.
This unit is composed by an electric motor fed
through the power grid providing a constant air
flow over the motor fins regardless the
application speed.
With the inclusion of the forced ventilation unit
the total motor length increases as per the table
below:
HGF motor total length when fitted with forced ventilation unit
(mm)
IEC
NEMA
315L/A/B 5006/07/08T
The pictures below
ventilation units.
show
HGF
forced
315C/D/E 5009/10/11T
355L/A/B 5807/08/09T
355C/D/E 5810/11/12T
400L/A/B 6806/07/08T
400C/D/E 6809/10/11T
Forced ventilation Unit – cast iron fan cover
2
1725
Suitable
to
encoder
1835
4–8
1755
1865
2
2025
2135
4–8
2055
2165
Frame
Poles
Not Suitable to
encoder
2
1905
2015
4–8
1975
2085
2
2205
2315
4–8
2275
2385
2
2190
2300
4–8
2260
2370
2
2490
2600
4–8
2560
2670
2
2780
2880
4–8
2800
2900
450
70
500
80
4–8
3120
3220
560
88
4–8
3500
3600
630
96
4–8
3700
HGF length with forced ventilation unit
Forced ventilation Unit – steel fan cover
WEG Equipamentos Elétricos S/A
Av. Prefeito Waldemar Grubba, 3000 - 89256-900 - Jaraguá do Sul - SC - Fone (47) 3276-4000 - Fax (47) 3276-4010 – www.weg.net
3800
Special Accessories
HGF motors can be fitted with a wide range of
accessories to best suit special requirement
applications.
The following accessories are the most
common to the HGF range and they are
available on request.
Surge arrestor
Non-reverse ratchet
Some application does not allow both rotation
direction. One way to meet this requirement is
by installing a non-reverse ratchet which does
not allow the shaft to turn in one direction.
Encoder
Used to a precise speed control in critical
application. It is assembled within the fan cover
enclosure and it is direct coupled to a motor
shaft extension. WEG uses as standard the
Dynapar HS35 model.
Capacitors
High voltage HGF motors can be supplied with
1 set of capacitors per phase. They are
assembled in the main terminal box and are
recommended to systems with potential voltage
peaks during maneuvering or atmospheric
discharges. The capacitors are fitted onto a
stainless steel enclosure that has the following
features:
• Capacitance – 0,5 µF
• Rated voltage – up to 7.2 kV
• Voltage Class – 15 kV
Dynapar HS35 Encoder
Surge arrestors
High voltage HGF terminal boxes can be fitted
with 1 set of surge arrestors per phase. Those
equipments are manufactured according to
IEC60099-4 and are classified according to the
voltage class: 3 kV, 6 kV, 9 kV or 12 kV.
Typical capacitor to HGF motors
Jacking Bolts
Field replacements may be challenge mainly
due to lack of interchangeability with old
machines. To ease this task, HGF motors may
be supplied with intermediate base or extended
feet, for a complete interchangeability solution.
WEG Equipamentos Elétricos S/A
Av. Prefeito Waldemar Grubba, 3000 - 89256-900 - Jaraguá do Sul - SC - Fone (47) 3276-4000 - Fax (47) 3276-4010 – www.weg.net
Interchangeability solution
Field replacements may be a challenge, mainly
due to the lack of interchangeability with old
machines. HGF motors may be supplied with
intermediate base or extended feet, for a
complete interchangeability solution.
If a motor in frame size immediately higher
(shaft height) than the standard one is required
(frame size 315 with shaft height of frame size
355), a motor with extended feet is supplied,
where the feet of the own cast frame are
changed. In this case, the main dimensions are
the dimensions of the immediately higher frame
size (feet and shaft height).
If a motor in two shaft heights immediately
higher (frame size 315 with shaft height of
frame size 400) is required, the motor is
generally supplied with intermediate steel base.
In this case the top side of base has the drilling
distances for fixing the standard motor with the
required output and the drilling L/A/B/D/E and
the main dimensions of the of the higher frame
size C/D/E (feet and shaft height).
Exploded View
The explode view below shows the main components of the HGF motors. Information about the terminal boxes (main terminal
box and accessory terminal boxes) are given in the specific dimensional table.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
DE seal
DE external bearing cap
Grease centrifuge
DE end shield
DE bearing
DE internal bearing cap
Space Heater
Grease nipple
Main terminal box support
Motor Nameplate
Grounding
Eyebolts
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
24.
Tampa de fechamento
Frame
Internal Fan
NDE internal bearing cap
NDE bearing
NDE end shield
Grease centrifuge
NDE external bearing cap
NDE seal
Fan
Fan cover
Top Hat
WEG Equipamentos Elétricos S/A
Av. Prefeito Waldemar Grubba, 3000 - 89256-900 - Jaraguá do Sul - SC - Fone (47) 3276-4000 - Fax (47) 3276-4010 – www.weg.net
D:\Arquivos Catálogo 09062010\Escopos catalogo\HGF_-_EUA-CANADA.xls
Frame
5006/7/8T
5009/10/11T
5807/8/9T
5810/11/12T
6806/7/8T
Mechanical Features
6809/10/11T
1/1
7006/10
8006/10
8806/10
9606/10
Under request
Steel
-
Under request
Steel
Nameplate markings
Frame
Mounting
Material
Protection Degree (IP rating)
Grounding
Cooling Method (IC)
Fan
Material
Fan cover
Material
B3R(D)
FC-200 Cast Iron
IP55
Double grounding (inside the t-box + 2 in the frame)
Totally enclosed fan cooled (IC411)
Aluminium
Aluminium
2-4P
6-8P
2P
Cast iron for anti-friction bearings without forced ventilation kit /
Steel for sleeve bearing and anti-friction bearings with forced ventilation kit
4-8P
Material
Endshields
Drain Plug
Shielded/Clearance (DE)
Shielded/Clearance (NDE)
Drive end
Non-drive end
2p
4 - 8p
2p
4 - 8p
DE bearing locked with inner and outer bearing caps and fitted with pre-load springs in the NDE bearing
6314
6320
6314
6316
6314
6320
6314
6316
9-80
9-90
9-80
9-90
9-80
9-90
9-80
9-90
Axial float
Locating bearing configuration
Sleeve Bearings
Drive end
Non-drive end
Lubrication
Terminal Box
Leads Inlet
Shaft
Nameplate
Painting
2p
4 - 8p
2p
4 - 8p
Bearing Seal
Joint Seal
Grease Type
Grease fitting
Terminal Block
Material
Main T-Box
Thread size
Additional T-Box
Thread size
Plug
Material
DE Threaded
2p
bore
4 - 8p
Key
Vibration
Balancing level
Material
Plan
Colour
Design
Voltage
Winding
Steel
Plastic Automatically operated
C3
C3
Locating bearing configuration
Bearings
Steel
FC-200 Cast Iron
Material
Impregnation
Insulation Class
Service Factor
Rotor
Thermal Protection
6314
6322
6314
6320
6314
6322
6314
6320
9-80
9-100
9-80
9-100
9-80
9-100
9-80
9-100
6315
NU224
6315
6320
6315
NU224
6315
6320
6mm (2P)/8mm (4P)
6
6220
6328
6220
6322
6330
6324
8mm
9-80
11-125
9-80
11-110
11-140
11-125
Under request
Located DE bearing
9-80
11-110
9-80
11-110
9-80
11-110
9-80
11-110
Taconite labyrinth
None
Under Request
Polirex® EM 103 (Exxon Mobil)
Staburags N12MF
With grease fittings in DE and NDE bearings
Low and High Voltage - Without HGF terminal block
Low and High Voltage - With HGF terminal block
FC-200 Cast Iron
Low Voltage - 2 x NPT 3" / High Voltage - 1 x NPT 3"
3 x NPT 3/4"
Threaded plastic plug
AISI 4140
AISI 1524
UNC 3/4"
Under request
UNC 7/8"
UNC 7/8"
UNC 1"
Fitted with "C" type
Grade A
With 1/2 key
Stainless Steel AISI 304
214P
212P
RAL 5007
Electrical Features
Design N for Low Voltage
380 up to 6600V
2300 up to 6600V
Copper
Low Voltage - Continuos resin flow impregnation / High Voltage - VPI
F (DT 80K)
1,0
Die-cast Aluminium
Copper bar
3-wire PT100 - 2 per phase
HGF_-_EUA-CANADA.xls
Frame
5006/7/8T 5009/10/11T 5807/8/9T 5810/11/12T 6806/7/8T 6809/10/11T 7006/10 8006/10 8806/10 9606/10
Main eletrical features
Service factor
Service factor 1.00
P
P
P
P
P
P
P
P
P
P
Service factor 1.15
O
O
O
O
O
O
O
O
O
O
Service factor 1.25
E
E
E
E
E
E
E
E
E
E
Class of Insulation
F DT 70K
E
E
E
E
E
E
E
E
E
E
F DT 80K
P
P
P
P
P
P
P
P
P
P
F DT 105K
O
O
O
O
O
O
O
O
O
O
H DT 80K
E
E
E
E
E
E
E
E
E
E
H DT 105K
E
E
E
E
E
E
E
E
E
E
H DT 125K
E
E
E
E
E
E
E
E
E
E
Space Heater
110-127 / 220-240 V
P
P
P
P
P
P
P
P
P
P
380-480 V
O
O
O
O
O
O
O
O
O
O
Thermal Protection - Alarm (Winding)
Bimetal thermal protector - 130°C Alarm
O
O
O
O
O
O
O
O
O
O
3 wire PT100 - Alarm
P
P
P
P
P
P
P
P
P
P
3 wire PT100 - Alarm - calibrated
O
O
O
O
O
O
O
O
O
O
PTC Thermistor - 130°C - Alarm
O
O
O
O
O
O
O
O
O
O
Thermal Trip Protection (winding)
Bimetal thermal protector - 155°C Tripping
O
O
O
O
O
O
O
O
O
O
3-wire PT100 3 - Tripping
P
P
P
P
P
P
P
P
P
P
3-wire PT100 3 - Tripping - calibrated
O
O
O
O
O
O
O
O
O
O
PTC Thermistor - 155°C - Tripping
O
O
O
O
O
O
O
O
O
O
Design
N ( only for Low Voltage)
P
P
P
P
P
P
P
P
P
P
Main optionals of terminal box
Terminal Box Type
HGF (FC-200 Cast Iron)
P
P
P
P
P
P
P
P
P
P
HGF (Steel) AT
O
O
O
O
O
O
O
O
O
O
HGF (Steel) BT
O
O
O
O
O
O
O
O
O
O
Cable Gland
Plastic
O
O
O
O
O
O
O
O
O
O
Brass
O
O
O
O
O
O
O
O
O
O
Stainless steel
O
O
O
O
O
O
O
O
O
O
Main mechanical features
Flange
Flange FF 1)
O
O
O
O
O
O
O
O
O
O
Without Flange
P
P
P
P
P
P
P
P
P
P
Drip cover - cast-iron fan cover - II e IV poles 1)
O
O
O
O
P
P
NA
NA
NA
NA
Drip cover - cast-iron fan cover - VI poles and above 1)
O
O
O
O
O
O
NA
NA
NA
NA
Terminal Block
Parafuso de ligação HGF - BAIXA E ALTA TENSÃO
O
O
O
O
O
O
P
P
P
P
Degree of protection
IP55
P
P
P
P
P
P
P
P
P
P
IP56
O
O
O
O
O
O
O
O
O
O
IP65
O
O
O
O
O
O
O
O
O
O
IP66
O
O
O
O
O
O
O
O
O
O
IPW55
O
O
O
O
O
O
O
O
O
O
IPW56
O
O
O
O
O
O
O
O
O
O
IPW65
O
O
O
O
O
O
O
O
O
O
IPW66
O
O
O
O
O
O
O
O
O
O
Drive End Bearing Seal
Taconite labyrinth
P
P
P
P
P
P
P
P
P
P
Taconite labyrinth with viton seal
O
O
O
O
O
O
O
O
O
O
Mechanical Seal 2)
O
O
O
O
O
O
O
O
O
O
Non Drive End Bearing Seal
P
P
P
P
P
P
P
P
P
P
Same of drive end bearing seal
Plano de Pintura
212E
O
O
O
O
O
O
O
O
O
O
212P
O
O
O
O
O
O
P
P
P
P
213E
O
O
O
O
O
O
O
O
O
O
214P
P
P
P
P
P
P
O
O
O
O
212P with PFI 1023
O
O
O
O
O
O
O
O
O
O
213E with PFI 1023
O
O
O
O
O
O
O
O
O
O
Grounding
Double grounding (1 in terminal box + 2 on frame)
P
P
P
P
P
P
P
P
P
P
Double grounding + acessory t. (1 in terminal box + 3 on frame)
O
O
O
O
O
O
O
O
O
O
Fan
Aluminium (2 and 4 poles)
P
P
P
P
P
P
P
P
NA
NA
Aluminium (from 6 poles on)
P
P
P
P
P
P
P
P
NA
NA
Cast iron (from 4 poles on)
O
O
O
O
O
O
O
O
NA
NA
Steel
NA
NA
NA
NA
NA
NA
NA
NA
P
P
P
P
P
P
P
P
P
P
P
P
Threaded center hole (shaft)
Lubrification
Polirex® EM 103 (Exxon Mobil)
P
P
P
P
P
P
P
NA
NA
NA
Staburags N12MF
NA
NA
NA
NA
NA
NA
NA
P
P
P
Grease fitting
Carbon steel grease fitting
P
P
P
P
P
P
P
P
P
P
Insulated drive endshield hub
Non insulated
P
P
P
P
P
P
P
P
P
P
Insulated bearing
E
E
E
E
E
E
E
E
E
E
Insulated endshield
E
E
E
E
E
E
E
E
E
E
Insulated non-drive endshield hub
Non insulated
P
P
P
P
NA
NA
NA
NA
NA
NA
Insulated bearing
E
E
E
E
E
E
E
E
E
E
Cover HGF
O
O
O
O
P
P
P
P
P
P
Drive End Bearing Type
C3
P
P
P
P
P
P
P
P
P
P
C4
E
E
E
E
E
E
E
E
E
E
Non-Drive End Bearing Type
C3
P
P
P
P
P
P
P
P
P
P
C4
E
E
E
E
E
E
E
E
E
E
Contato Angular - BE ( 2 pólos) 1)
O
O
O
O
NA
NA
NA
NA
NA
NA
Contato Angular - BE ( 4 a 8 pólos) 1)
O
O
O
O
O
O
O
O
NA
NA
Balance
Balance Type
Normal balance with 1/2 key
P
P
P
P
P
P
P
P
P
P
Reduced balance with 1/2 key
O
O
O
O
O
O
O
O
O
O
Shaft
Shaft Material
AISI 4140
P
P
P
P
P
P
O
O
NA
NA
AISI 4140H
NA
NA
NA
NA
NA
NA
P
P
NA
NA
AISI 1524 (4 to 8 pólos)
NA
NA
NA
NA
NA
NA
NA
O
P
P
Key
C Key
P
P
P
P
P
P
P
P
P
P
Shaft Locking Device
P
P
P
P
P
P
P
P
P
P
TS Shaft End (2 poles)
P
P
P
P
P
P
NA
NA
NA
NA
Feature
1/1
HGF_-_EUA-CANADA.xls
Feature
5006/7/8T 5009/10/11T 5807/8/9T 5810/11/12T 6806/7/8T 6809/10/11T 7006/10 8006/10 8806/10 9606/10
Bearings
Drive End Bearing Type
Ball bearing (2 pole)
P
P
P
P
P
P
P
NA
NA
NA
Ball bearing (4 up to 8 poles)*
P
P
P
P
O
O
P
P
NA
NA
Roller bearing (4 up to 8 poles)
O
O
O
O
P
P
O
O
P
P
Sleeve (HGF) 2)
O
O
O
O
O
O
O
O
E
E
Non-Drive End Bearing Type
Ball bearing
P
P
P
P
P
P
P
P
NA
NA
Roller bearing (4 up to 8 poles)
O
O
O
O
O
O
O
O
NA
NA
BE angular contact spheres 1)
NA
NA
NA
NA
NA
NA
NA
NA
P
P
Insulated sleeve (HGF) 2)
O
O
O
O
O
O
O
O
E
E
Oil iso vg 2)
O
O
O
O
O
O
O
O
O
O
Bearing cap
Bearing cap
P
P
P
P
P
P
P
P
P
P
Special seals
Joint seal
Loctite 5923 (Permatex) on joints
O
O
O
O
O
O
O
O
O
O
Without sealling on gaskets
P
P
P
P
P
P
P
P
P
P
Terminal box Plug
Threaded plastic plug
P
P
P
P
P
P
P
P
P
P
Iron Threaded
O
O
O
O
O
O
O
O
O
O
Without plug
O
O
O
O
O
O
O
O
O
O
Mechanical Optionals
Cooling
TEFC (fan cooled)
P
P
P
P
P
P
P
P
P
P
TFVE with steel surrouding muffler
O
O
O
O
O
O
O
O
O
O
TFVE with fiber surrouding muffler
O
O
O
O
O
O
O
O
O
O
TEBC (blower cooled)
O
O
O
O
O
O
O
O
O
O
TFVF with steel surrouding muffler
E
E
E
E
E
E
E
E
E
E
TFVF with fiber surrouding muffler
E
E
E
E
E
E
E
E
E
E
Internal Painting
Internal Tropicalized Painting
O
O
O
O
O
O
O
O
O
O
Drain
Open plastic drain plug (Automatic)
P
P
P
P
P
P
P
P
P
P
Closed plastic drain plug
O
O
O
O
O
O
O
O
O
O
Bolt material
Stainless steel bolts
O
O
O
O
O
O
O
O
O
O
Grease outlet
Grease outlet by plastic slide valve
P
P
P
P
P
P
P
P
P
P
Grease outlet through endshield
E
E
E
E
E
E
E
E
E
E
Inverter use
Forced Ventilation Kit
Kit de ventilação forçada apto a encoder
O
O
O
O
O
O
O
O
O
O
Kit de ventilação forçada não apto a encoder
O
O
O
O
O
O
O
O
O
O
Voltage Supply of kit
208-230/460V
O
O
O
O
O
O
O
O
O
O
220-240/380-415V
O
O
O
O
O
O
O
O
O
O
220/380-440V
O
O
O
O
O
O
O
O
O
O
380-415/660V
O
O
O
O
O
O
O
O
O
O
525-550V
O
O
O
O
O
O
O
O
O
O
575V
O
O
O
O
O
O
O
O
O
O
220/380
O
O
O
O
O
O
O
O
O
O
220/440
O
O
O
O
O
O
O
O
O
O
230/460V
O
O
O
O
O
O
O
O
O
O
240/480V
O
O
O
O
O
O
O
O
O
O
380/660V
O
O
O
O
O
O
O
O
O
O
400/690V
O
O
O
O
O
O
O
O
O
O
440V
O
O
O
O
O
O
O
O
O
O
460V
O
O
O
O
O
O
O
O
O
O
480V
O
O
O
O
O
O
O
O
O
O
Encoder
Without encoder
P
P
P
P
P
P
P
P
P
P
With HS 35 encoder
O
O
O
O
O
O
O
O
O
O
Leine&Linde XH861 900220
E
E
E
E
E
E
E
E
E
E
Grounding brush
Drive end grounding brush
O
O
O
O
O
O
O
O
O
O
Fan cover
Fan cover material for sleeve bearing and roling bearing with forced ventilation
Fabricated steel (2 poles horizontal )
P
P
P
P
P
P
P
NA
NA
NA
Fabricated steel (4 poles horizontal and above )
O
O
O
O
O
O
O
P
P
P
Fan cover material for rolling bearings and without forced ventilation
Fabricated steel (2 poles horizontal )
NA
NA
NA
NA
NA
NA
P
NA
NA
NA
Fabricated steel (4 poles horizontal and above )
NA
NA
NA
NA
NA
NA
O
P
P
P
Cast iron
P
P
P
P
P
P
NA
NA
NA
NA
Fiber glass (from 4 poles on)
NA
NA
NA
NA
NA
NA
P
NA
NA
NA
Noise supressor for motors without forced ventilation
without noise supressor
P
P
P
P
P
P
P
P
P
P
with noise supressor
NA
NA
NA
NA
NA
NA
O
O
O
O
Electrical Optionals
Bearing thermal protection
Bimetal thermal protector - drive end / non-drive end
O
O
O
O
O
O
O
O
O
O
3-wire PT100 - drive end / non drive end
P
P
P
P
P
P
P
P
P
P
3-wire calibrated Pt100 - drive end / non drive end
O
O
O
O
O
O
O
O
O
O
2 x 3-wire PT100 - drive end / non drive end
O
O
O
O
O
O
O
O
O
O
2 x 3-wire calibrated Pt100 - drive end / non drive end
O
O
O
O
O
O
O
O
O
O
Direction of Rotation
Both (4 up to 8 poles)
P
P
P
P
P
P
P
P
P
P
Clockwise (2 poles)
P
P
P
P
P
P
P
E
E
E
Clockwise (4 up to 8 poles)
O
O
O
O
O
O
O
O
O
O
Counterclockwise
O
O
O
O
O
O
O
O
O
O
Nameplate with arrow indicating direction of rotation
P
P
P
P
P
P
P
P
P
P
Impregnation
Low Voltage - Continuos resin flow impregnation
P
P
P
P
P
P
P
P
P
P
High Voltage - VPI
P
P
P
P
P
P
P
P
P
P
High Voltage - 2xVPI
O
O
O
O
O
O
O
O
O
O
High Voltage - 2xVPI+Pulver
O
O
O
O
O
O
O
O
O
O
Vibration
Vibration Level
Grade A
P
P
P
P
P
P
P
P
P
P
Grade B
O
O
O
O
O
O
O
O
O
O
Vibration Sensor
Prepared for assemby of SPM vibration sensor
O
O
O
O
O
O
O
O
O
O
Symbols: P (standard), O (optional), NA (Not Available), E (inquiry WEG).
*optional for 400 frame verticals only - in this case roller bearings doesn´t apply
1) standard for vertical motors
2) standard for motors with sleeve bearings
1/1
D:\Arquivos Catálogo 09062010\Escopos catalogo\HGF_-_EUROPA.xls
Frame
315L/A/B
315C/D/E
355L/A/B
355C/D/E
400L/A/B
Mechanical Features
400/C/D/E
1/1
450
500
560
630
Under request
Steel
-
Under request
Steel
Nameplate markings
Frame
Mounting
Material
Protection Degree (IP rating)
Grounding
Cooling Method (IC)
Fan
Material
Fan cover
Material
B3R(E)
FC-200 Cast Iron
IP55
Double grounding (inside the t-box + 2 in the frame)
Totally enclosed fan cooled (IC411)
Aluminium
Aluminium
Steel
Cast iron for anti-friction bearings without forced ventilation kit /
Steel for sleeve bearing and anti-friction bearings with forced ventilation kit
Fiber glass
FC-200 Cast Iron
Plastic Automatically operated
C3
C3
2-4P
6-8P
2P
4-8P
Material
Endshields
Drain Plug
Shielded/Clearance (DE)
Shielded/Clearance (NDE)
Locating bearing configuration
Bearings
Drive end
Non-drive end
2p
4 - 8p
2p
4 - 8p
DE bearing locked with inner and outer bearing caps and fitted with pre-load springs in the NDE bearing
6314
6320
6314
6316
6314
6320
6314
6316
Axial float
Locating bearing configuration
Sleeve Bearings
Drive end
Non-drive end
Lubrication
Terminal Box
Leads Inlet
Shaft
Nameplate
Painting
2p
4 - 8p
2p
4 - 8p
Bearing Seal
Joint Seal
Grease Type
Grease fitting
Terminal Block
Material
Main T-Box
Thread size
Additional T-Box
Thread size
Plug
Material
DE Threaded
2p
bore
4 - 8p
Key
Vibration
Balancing level
Material
Plan
Colour
Design
Voltage
Winding
Material
Impregnation
Insulation Class
Service Factor
Rotor
Thermal Protection
Steel
6314
6322
6314
6320
6314
6322
6314
6320
9-80
9-100
9-80
9-100
9-80
9-100
9-80
9-100
6315
NU224
6315
6320
6
9-80
9-90
9-80
9-90
9-80
9-90
9-80
9-90
Located DE bearing
9-80
11-110
9-80
11-110
6315
NU224
6315
6320
6mm (2P)/8mm (4P)
9-80
11-110
9-80
11-110
Taconite labyrinth
None
6220
6328
6220
6322
6330
6324
8mm
9-80
11-125
9-80
11-110
11-140
11-125
Polirex® EM 103 (Exxon Mobil)
With grease fittings in DE and NDE bearings
With HGF terminal block
FC-200 Cast Iron
Low Voltage - 2xM63x1.5 / High Voltage - M63x1.5
3xM20x1.5
Threaded plastic plug
AISI 4140
M20
M24
Fitted with "C" type
Grade A
With 1/2 key
Stainless Steel AISI 304
214P
RAL 5007
Electrical Features
Design N for Low Voltage
380 up to 6600V
Copper
Low Voltage - Continuos resin flow impregnation / High Voltage - VPI
F (DT 80K)
1,0
Die-cast Aluminium
3-wire PT100 - 2 per phase
Under request
Under Request
Staburags N12MF
AISI 1524
Under request
M30
212P
2300 up to 6600V
Copper bar
HGF_-_EUROPA.xls
Característica
Service factor 1.00
Service factor 1.15
Service factor 1.25
F DT 70K
F DT 80K
F DT 105K
H DT 80K
H DT 105K
H DT 125K
110-127 / 220-240 V
380-480 V
Bimetal thermal protector - 130°C Alarm
3 wire PT100 - Alarm
3 wire PT100 - Alarm - calibrated
PTC Thermistor - 130°C - Alarm
Bimetal thermal protector - 155°C Tripping
3-wire PT100 3 - Tripping
3-wire PT100 3 - Tripping - calibrated
PTC Thermistor - 155°C - Tripping
N ( only for Low Voltage)
HGF (FC-200 Cast Iron)
HGF (Steel) AT
HGF (Steel) BT
Plastic
Brass
Stainless steel
Flange FF 1)
Without Flange
Drip cover - cast-iron fan cover - II e IV poles 1)
Drip cover - cast-iron fan cover - VI poles and above 1)
Terminal block - Low and High Voltage
IP55
IP56
IP65
IP66
IPW55
IPW56
IPW65
IPW66
Taconite labyrinth
Taconite labyrinth with viton seal
Mechanical Seal 2)
Same of drive end bearing seal
212E
212P
213E
214P
212P with PFI 1023
213E with PFI 1023
Double grounding (1 in terminal box + 2 on frame)
Double grounding + acessory t. (1 in terminal box + 3 on frame)
Aluminium (2 and 4 poles)
Aluminium (from 6 poles on)
Cast iron (from 4 poles on)
Steel
Threaded center hole (shaft)
Polirex® EM 103 (Exxon Mobil)
Staburags N12MF
Carbon steel grease fitting
Non insulated
Insulated bearing
Insulated endshield
Non insulated
Insulated bearing
Cover HGF
C3
C4
C3
C4
Angular contact - BE ( 2 pólos) 1)
Angular contact - BE ( 4 a 8 pólos) 1)
Normal balance with 1/2 key
Reduced balance with 1/2 key
AISI 4140
AISI 4140H
AISI 1524 (4 to 8 pólos)
Carcaça
315L/A/B 315C/D/E 355L/A/B 355C/D/E 400L/A/B 400/C/D/E
Main eletrical features
Service factor
P
P
P
P
P
P
O
O
O
O
O
O
E
E
E
E
E
E
Class of Insulation
E
E
E
E
E
E
P
P
P
P
P
P
O
O
O
O
O
O
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
Space Heater
P
P
P
P
P
P
O
O
O
O
O
O
Thermal Protection - Alarm (Winding)
O
O
O
O
O
O
P
P
P
P
P
P
O
O
O
O
O
O
O
O
O
O
O
O
Thermal Trip Protection (winding)
O
O
O
O
O
O
P
P
P
P
P
P
O
O
O
O
O
O
O
O
O
O
O
O
Design
P
P
P
P
P
P
Main optionals of terminal box
Terminal Box Type
P
P
P
P
P
P
O
O
O
O
O
O
O
O
O
O
O
O
Cable Gland
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
Main mechanical features
Flange
O
O
O
O
O
O
P
P
P
P
P
P
O
O
O
O
P
P
O
O
O
O
O
O
Terminal Block
P
P
P
P
P
P
Degree of protection
P
P
P
P
P
P
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
Drive End Bearing Seal
P
P
P
P
P
P
O
O
O
O
O
O
O
O
O
O
O
O
Non Drive End Bearing Seal
P
P
P
P
P
P
Plano de Pintura
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
P
P
P
P
P
P
O
O
O
O
O
O
O
O
O
O
O
O
Grounding
P
P
P
P
P
P
O
O
O
O
O
O
Fan
P
P
P
P
P
P
P
P
P
P
P
P
O
O
O
O
O
O
NA
NA
NA
NA
NA
NA
P
P
P
P
P
P
Lubrification
P
P
P
P
P
P
NA
NA
NA
NA
NA
NA
Grease fitting
P
P
P
P
P
P
Insulated drive endshield hub
P
P
P
P
P
P
E
E
E
E
E
E
E
E
E
E
E
E
Insulated non-drive endshield hub
P
P
P
P
NA
NA
E
E
E
E
E
E
O
O
O
O
P
P
Drive End Bearing Type
P
P
P
P
P
P
E
E
E
E
E
E
Non-Drive End Bearing Type
P
P
P
P
P
P
E
E
E
E
E
E
O
O
O
O
NA
NA
O
O
O
O
O
O
Balance
Balance Type
P
P
P
P
P
P
O
O
O
O
O
O
Shaft
Shaft Material
P
P
P
P
P
P
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
1/1
450
500
560
630
P
O
E
P
O
E
P
O
E
P
O
E
E
P
O
E
E
E
E
P
O
E
E
E
E
P
O
E
E
E
E
P
O
E
E
E
P
O
P
O
P
O
P
O
O
P
O
O
O
P
O
O
O
P
O
O
O
P
O
O
O
P
O
O
O
P
O
O
O
P
O
O
O
P
O
O
P
P
P
P
P
O
O
P
O
O
P
O
O
P
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
P
NA
NA
O
P
NA
NA
O
P
NA
NA
O
P
NA
NA
P
P
P
P
P
O
O
O
O
O
O
O
P
O
O
O
O
O
O
O
P
O
O
O
O
O
O
O
P
O
O
O
O
O
O
O
P
O
O
P
O
O
P
O
O
P
O
O
P
P
P
P
O
P
O
O
O
O
O
P
O
O
O
O
O
P
O
O
O
O
O
P
O
O
O
O
P
O
P
O
P
O
P
O
P
P
O
NA
P
P
P
O
NA
P
NA
NA
NA
P
P
NA
NA
NA
P
P
P
NA
NA
P
NA
P
NA
P
P
P
P
P
P
E
E
P
E
E
P
E
E
P
E
E
NA
E
P
NA
E
P
NA
E
P
NA
E
P
P
E
P
E
P
E
P
E
P
E
NA
O
P
E
NA
O
P
E
NA
NA
P
E
NA
NA
P
O
P
O
P
O
P
O
O
P
NA
O
P
O
NA
NA
P
NA
NA
P
HGF_-_EUROPA.xls
315L/A/B 315C/D/E 355L/A/B 355C/D/E 400L/A/B 400/C/D/E
Key
C Key
P
P
P
P
P
P
P
P
P
P
P
P
Shaft Locking Device
TS Shaft End (2 poles)
P
P
P
P
P
P
Bearings
Drive End Bearing Type
Ball bearing (2 pole)
P
P
P
P
P
P
Ball bearing (4 up to 8 poles)*
P
P
P
P
O
O
Roller bearing (4 up to 8 poles)
O
O
O
O
P
P
Sleeve (HGF) 2)
O
O
O
O
O
O
Non-Drive End Bearing Type
Ball bearing
P
P
P
P
P
P
Roller bearing (4 up to 8 poles)
O
O
O
O
O
O
BE angular contact spheres 1)
NA
NA
NA
NA
NA
NA
Insulated sleeve (HGF) 2)
O
O
O
O
O
O
O
O
O
O
O
O
Oil iso vg 2)
Bearing cap
Bearing cap
P
P
P
P
P
P
Special seals
Joint seal
Loctite 5923 (Permatex) on joints
O
O
O
O
O
O
Without sealling on gaskets
P
P
P
P
P
P
Terminal box Plug
Threaded plastic plug
P
P
P
P
P
P
Iron Threaded
O
O
O
O
O
O
Without plug
O
O
O
O
O
O
Mechanical Optionals
Cooling
TEFC (fan cooled)
P
P
P
P
P
P
TFVE with steel surrouding muffler
O
O
O
O
O
O
TFVE with fiber surrouding muffler
O
O
O
O
O
O
TEBC (blower cooled)
O
O
O
O
O
O
TFVF with steel surrouding muffler
E
E
E
E
E
E
TFVF with fiber surrouding muffler
E
E
E
E
E
E
Internal Painting
O
O
O
O
O
O
Internal Tropicalized Painting
Drain
Open plastic drain plug (Automatic)
P
P
P
P
P
P
O
O
O
O
O
O
Closed plastic drain plug
Bolt material
Stainless steel bolts
O
O
O
O
O
O
Grease outlet
Grease outlet by plastic slide valve
P
P
P
P
P
P
Grease outlet through endshield
E
E
E
E
E
E
Inverter use
Forced Ventilation Kit
Kit de ventilação forçada apto a encoder
O
O
O
O
O
O
Kit de ventilação forçada não apto a encoder
O
O
O
O
O
O
Voltage Supply of kit
208-230/460V
O
O
O
O
O
O
220-240/380-415V
O
O
O
O
O
O
220/380-440V
O
O
O
O
O
O
380-415/660V
O
O
O
O
O
O
525-550V
O
O
O
O
O
O
575V
O
O
O
O
O
O
220/380
O
O
O
O
O
O
220/440
O
O
O
O
O
O
230/460V
O
O
O
O
O
O
240/480V
O
O
O
O
O
O
380/660V
O
O
O
O
O
O
400/690V
O
O
O
O
O
O
440V
O
O
O
O
O
O
460V
O
O
O
O
O
O
480V
O
O
O
O
O
O
Encoder
Without encoder
P
P
P
P
P
P
With HS 35 encoder
O
O
O
O
O
O
Leine&Linde XH861 900220
E
E
E
E
E
E
Grounding brush
Drive end grounding brush
O
O
O
O
O
O
Fan cover material for sleeve bearing and roling bearing with forced ventilation
Fabricated steel (2 poles horizontal )
P
P
P
P
P
P
Fabricated steel (4 poles horizontal and above )
O
O
O
O
O
O
Fan cover material for rolling bearings and without forced ventilation
Fabricated steel (2 poles horizontal )
NA
NA
NA
NA
NA
NA
Fabricated steel (4 poles horizontal and above )
NA
NA
NA
NA
NA
NA
Cast iron
P
P
P
P
P
P
Fiber glass (from 4 poles on)
NA
NA
NA
NA
NA
NA
Noise supressor for motors without forced ventilation
without noise supressor
P
P
P
P
P
P
with noise supressor
NA
NA
NA
NA
NA
NA
Electrical Optionals
Bearing thermal protection
Bimetal thermal protector - drive end / non-drive end
O
O
O
O
O
O
3-wire PT100 - drive end / non drive end
P
P
P
P
P
P
3-wire calibrated Pt100 - drive end / non drive end
O
O
O
O
O
O
2 x 3-wire PT100 - drive end / non drive end
O
O
O
O
O
O
2 x 3-wire calibrated Pt100 - drive end / non drive end
O
O
O
O
O
O
Direction of Rotation
Both (4 up to 8 poles)
P
P
P
P
P
P
Clockwise (2 poles)
P
P
P
P
P
P
Clockwise (4 up to 8 poles)
O
O
O
O
O
O
Counterclockwise
O
O
O
O
O
O
Nameplate with arrow indicating direction of rotation
P
P
P
P
P
P
Impregnation
Low Voltage - Continuos resin flow impregnation
P
P
P
P
P
P
High Voltage - VPI
P
P
P
P
P
P
High Voltage - 2xVPI
O
O
O
O
O
O
High Voltage - 2xVPI+Pulver
O
O
O
O
O
O
Vibration
Vibration Level
Grade A
P
P
P
P
P
P
Grade B
O
O
O
O
O
O
Vibration Sensor
Prepared for assemby of SPM vibration sensor
O
O
O
O
O
O
Symbols: P (standard), O (optional), NA (Not Available), E (inquiry WEG).
*optional for 400 frame verticals only - in this case roller bearings doesn´t apply
1) standard for vertical motors
2) standard for motors with sleeve bearings
Característica
450
500
560
630
P
P
NA
P
P
NA
P
P
NA
P
P
NA
P
P
O
O
NA
P
O
O
NA
NA
P
E
NA
NA
P
E
P
O
NA
O
O
P
O
NA
O
O
NA
NA
P
E
O
NA
NA
P
E
O
P
P
P
P
O
P
O
P
O
P
O
P
P
O
O
P
O
O
P
O
O
P
O
O
P
O
O
O
E
E
P
O
O
O
E
E
P
O
O
O
E
E
P
O
O
O
E
E
O
O
O
O
P
O
P
O
P
O
P
O
O
O
O
O
P
E
P
E
P
E
P
E
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
P
O
E
P
O
E
P
O
E
P
O
E
O
O
O
O
P
O
NA
P
NA
P
NA
P
P
O
NA
P
NA
P
NA
NA
NA
P
NA
NA
NA
P
NA
NA
P
O
P
O
P
O
P
O
O
P
O
O
O
O
P
O
O
O
O
P
O
O
O
O
P
O
O
O
P
P
O
O
P
P
E
O
O
P
P
E
O
O
P
P
E
O
O
P
P
P
O
O
P
P
O
O
P
P
O
O
P
P
O
O
P
O
P
O
P
O
P
O
O
O
O
O
1/1
C:\Users\user\Desktop\Arquivos Catálogo 01062010\Escopos catalogo\HGF_-_BRASIL
Carcaça
315L/A/B
315C/D/E
355L/A/B
355C/D/E
Características Mecânicas
400L/A/B
400/C/D/E
1/1
450
500
560
630
Sob consulta
Aço
Sob consulta
Aço
Marcações na Placa de identificação:
Forma construtiva
Material
Grau de Proteção
Aterramento
Método de Refrigeração
Carcaça
Ventilador
Material
Tampa Defletora
Material
2-4P
6-8P
2P
4-8P
Material
Tampas
Dreno
Blind./Folga Dianteiro
Blind./Folga Traseiro
B3D
Ferro Fundido FC-200
IP55
Duplo aterramento (1caixa + 1 carcaça)
Totalmente fechado com ventilação externa (IC411)
Alumínio
Alumínio
Aço
Ferro Fundido p/ mancal de rolamento sem ventilação forçada. Aço / Fibra para mancal de
Fibra de Vidro
bucha e mancal de rolamento com ventilação forçada
Ferro Fundido
Dreno plástico Aberto (Automático)
C3
C3
Travado na dianteira com anéis de fixação internos e externos e molas de pré-carga na traseira
Travamento
Rolamentos
Lado dianteiro
Lado traseiro
2p
4 - 8p
2p
4 - 8p
6314
6320
6314
6316
6314
6320
6314
6316
Folga Axial
Lado dianteiro
Lado traseiro
2p
4 - 8p
2p
4 - 8p
Vedação Mancal
Vedação das Juntas
Tipo de Graxa
Lubrificação
Graxeira
Placa Bornes
Material
Caixa de Ligação
Principal
Tamanho
Entrada dos Cabos
Adicional
Tamanho
Tampão
Material
Eixo
2p
Furo roscado
4 - 8p
Chaveta
Vibração
Balanceamento
Placa de Identificação
Material
Plano
Pintura
Cor
Design
Tensão
Enrolamento
6314
6322
6314
6320
6mm
Travamento
Mancais de
deslizamento
Aço
Material
Impregnação
Classe de Isolamento
Fator de Serviço
Rotor
Proteção Térmica bobinado
9-80
9-90
9-80
9-90
9-80
9-90
9-80
9-90
6314
6322
6314
6320
6315
NU224
6315
6320
6315
NU224
6315
6320
6mm (2P)/8mm (4P)
6220
6328
6220
6322
6330
6324
Sob consulta
Mancal dianteiro com batentes axiais
9-80
9-80
9-80
9-80
9-80
9-100
9-100
11-110
11-110
11-125
11-140
9-80
9-80
9-80
9-80
9-80
9-100
9-100
11-110
11-110
11-110
11-125
Sob consulta
Labirinto Taconite
Sem vedação
Polirex® EM 103 (Exxon Mobil)
Staburags N12MF
Com graxeira
Baixa Tensão - SEM parafusos de ligação HGF / Alta Tensão - COM parafusos de ligação HGF
Ferro Fundido
Baixa Tensão - 2xRP(RWG) 3" / Alta Tensão - 1xRP(RWG) 3"
3xRP(RWG) 3/4"
Plástico roscado
AISI 4140
AISI 1524
M20
Sob consulta
M24
M30
Fornecido com chaveta do tipo C
Grau A
com meia chaveta
Aço inox AISI 304 com gravação a laser
214P
212P
RAL 5007
Características Elétricas
Baixa Tensão - categoria N / Alta Tensão - não aplicável
380 a 6600V
2300 a 6600V
Cobre
Baixa Tensão - Fluxo contínuo Resina / Alta Tensão - VPI
F (DT 80K)
1,0
Alumínio injetado
Barra cobre
PT100 3 fios ( 2 por fase)
HGF_-_BRASIL
Carcaça
315L/A/B 315C/D/E 355L/A/B 355C/D/E 400L/A/B 400/C/D/E
Principais opcionais elétricos
Fator de Serviço
Fator de Serviço 1.00
P
P
P
P
P
P
Fator de Serviço 1.15
O
O
O
O
O
O
Fator de Serviço 1.25
E
E
E
E
E
E
Classe de Isolamento
F DT 70K
E
E
E
E
E
E
F DT 80K
P
P
P
P
P
P
F DT 105K
O
O
O
O
O
O
H DT 80K
E
E
E
E
E
E
H DT 105K
E
E
E
E
E
E
H DT 125K
E
E
E
E
E
E
Resistência de Aquecimento
110-127 / 220-240 V
P
P
P
P
P
P
380-480 V
O
O
O
O
O
O
Proteção Térmica Alarme (bobinado)
Protetor térmico bimetálico (termostato) 130°C Alarme
O
O
O
O
O
O
PT100 3 fios Alarme
P
P
P
P
P
P
PT100 3 fios Alarme - CALIBRADO
O
O
O
O
O
O
Termistor PTC 130°C Alarme
O
O
O
O
O
O
Proteção Térmica Desligamento (bobinado)
Protetor térmico bimetálico (termostato) 155°C Desligamento
O
O
O
O
O
O
PT100 3 fios Desligamento
P
P
P
P
P
P
PT100 3 fios Desligamento - CALIBRADO
O
O
O
O
O
O
Termistor PTC 155°C Desligamento
O
O
O
O
O
O
Categoria/Design
N ( somente para motores Baixa Tensão)
P
P
P
P
P
P
Principais opcionais da caixa de ligação
Tipo de caixa ligação principal
HGF (Ferro Fundido)
P
P
P
P
P
P
HGF (AÇO) AT
O
O
O
O
O
O
HGF (AÇO) BT
O
O
O
O
O
O
Prensa cabos
Plástico
O
O
O
O
O
O
Latão
O
O
O
O
O
O
Aço Inox
O
O
O
O
O
O
Principais opcionais mecânicos
Flange
Flange FF 1)
O
O
O
O
O
O
Sem Flange
P
P
P
P
P
P
Chapéu - defletora ferro fundido - II e IV pólos 1)
O
O
O
O
P
P
Chapéu - defletora ferro fundido - a partir de VI pólos 1)
O
O
O
O
O
O
Placa de Bornes
Parafuso de ligação HGF - BAIXA TENSÃO
O
O
O
O
O
O
SEM Parafuso de ligação HGF - BAIXA TENSÃO
P
P
P
P
P
P
Parafuso de ligação HGF - ALTA TENSÃO
P
P
P
P
P
P
Grau de Proteção
IP55
P
P
P
P
P
P
IP56
O
O
O
O
O
O
IP65
O
O
O
O
O
O
IP66
O
O
O
O
O
O
IPW55
O
O
O
O
O
O
IPW56
O
O
O
O
O
O
IPW65
O
O
O
O
O
O
IPW66
O
O
O
O
O
O
Vedação Mancal dianteiro
Labirinto Taconite
P
P
P
P
P
P
Labirinto com Selo Teflon
O
O
O
O
O
O
Selo Mecânico 2)
O
O
O
O
O
O
Vedação Mancal traseiro
Igual a vedação dianteira
P
P
P
P
P
P
Plano de Pintura
212E
O
O
O
O
O
O
212P
O
O
O
O
O
O
213E
O
O
O
O
O
O
214P
P
P
P
P
P
P
212P c/ PFI 1023
O
O
O
O
O
O
213E c/ PFI 1023
O
O
O
O
O
O
Aterramento
Duplo aterramento (1caixa + 1 carcaça)
P
P
P
P
P
P
Duplo aterramento + Adicional (1caixa + 2 carcaça)
O
O
O
O
O
O
Ventilador
Alumínio (2 e 4 pólos)
P
P
P
P
P
P
Alumínio (6 pólos em diante)
P
P
P
P
P
P
Ferro (4 pólos em diante)
O
O
O
O
O
O
Aço
NA
NA
NA
NA
NA
NA
P
P
P
P
P
P
Furo de Centro roscado
Graxa - Lubrificação
Polirex® EM 103 (Exxon Mobil)
P
P
P
P
P
P
Staburags N12MF
NA
NA
NA
NA
NA
NA
Graxeira
Pino graxeiro em aço carbono
P
P
P
P
P
P
Mancal dianteiro isolado
Não isolado
P
P
P
P
P
P
Rolamento isolado
E
E
E
E
E
E
Tampa isolada
E
E
E
E
E
E
Mancal traseiro isolado
Não isolado
P
P
P
P
NA
NA
Rolamento isolado
O
O
O
O
O
O
Tampa isolada
O
O
O
O
P
P
Blindagem/Folga rolamento dianteiro
C3
P
P
P
P
P
P
C4
E
E
E
E
E
E
Blindagem/Folga rolamento traseiro
C3
P
P
P
P
P
P
C4
O
O
O
O
O
O
Contato Angular - BE ( 2 pólos) 1)
O
O
O
O
NA
NA
Contato Angular - BE ( 4 a 8 pólos) 1)
O
O
O
O
O
O
Balanceamento
Tipo de Balanceamento
Balanceamento normal com meia chaveta
P
P
P
P
P
P
Balanceamento reduzido com meia chaveta
O
O
O
O
O
O
Eixo
Material do Eixo
AISI 4140
P
P
P
P
P
P
AISI 4140H
NA
NA
NA
NA
NA
NA
AISI 1524 (4 a 8 pólos)
NA
NA
NA
NA
NA
NA
Chaveta
Chaveta C
P
P
P
P
P
P
Dispositivo de travamento de eixo
P
P
P
P
P
P
Característica
1/1
450
500
560
630
P
O
E
P
O
E
P
O
E
P
O
E
E
P
O
E
E
E
E
P
O
E
E
E
E
P
O
E
E
E
E
P
O
E
E
E
P
O
P
O
P
O
P
O
O
P
O
O
O
P
O
O
O
P
O
O
O
P
O
O
O
P
O
O
O
P
O
O
O
P
O
O
O
P
O
O
P
P
P
P
P
O
O
P
O
O
P
O
O
P
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
P
NA
NA
O
P
NA
NA
O
P
NA
NA
O
P
NA
NA
P
O
P
P
O
P
P
O
P
P
O
P
P
O
O
O
O
O
O
O
P
O
O
O
O
O
O
O
P
O
O
O
O
O
O
O
P
O
O
O
O
O
O
O
P
O
O
P
O
O
P
O
O
P
O
O
P
P
P
P
O
P
O
O
O
O
O
P
O
O
O
O
O
P
O
O
O
O
O
P
O
O
O
O
P
O
P
O
P
O
P
O
P
P
O
NA
P
P
P
O
NA
P
NA
NA
NA
P
P
NA
NA
NA
P
P
P
NA
NA
P
NA
P
NA
P
P
P
P
P
P
E
E
P
E
E
P
E
E
P
E
E
NA
O
P
NA
O
P
NA
O
P
NA
O
P
P
E
P
E
P
E
P
E
P
O
NA
O
P
O
NA
O
P
O
NA
NA
P
O
NA
NA
P
O
P
O
P
O
P
O
O
P
NA
O
P
O
NA
NA
P
NA
NA
P
P
P
P
P
P
P
P
P
HGF_-_BRASIL
Característica
315L/A/B 315C/D/E 355L/A/B 355C/D/E 400L/A/B 400/C/D/E
450
Carcaça
Característica
315L/A/B 315C/D/E 355L/A/B 355C/D/E 400L/A/B 400/C/D/E
450
Rolamentos
Tipo de rolamento dianteiro
Esferas (2 pólos)
P
P
P
P
P
P
P
Esferas (4 a 8 pólos)*
P
P
P
P
O
O
P
Rolos (4 a 8 pólos)
O
O
O
O
P
P
O
Bucha HGF (deslizamento)
O
O
O
O
O
O
O
Tipo de rolamento traseiro
Esferas
P
P
P
P
P
P
P
Rolos (4 a 8 pólos)
NA
NA
NA
NA
NA
NA
NA
Esferas contato angular BE 1)
O
O
O
O
O
O
O
Bucha HGF (deslizamento) isolada
O
O
O
O
O
O
O
O
O
O
O
O
O
O
Óleo iso vg 2)
Anel de fixação rolamento
Anel de fixação
P
P
P
P
P
P
P
Vedações especiais
Vedação das juntas
Loctite 5923 (Permatex) nas juntas
O
O
O
O
O
O
O
Sem vedação
P
P
P
P
P
P
P
Caixas de ligação - Tampão
Plástico roscado
P
P
P
P
P
P
P
Ferro roscado
O
O
O
O
O
O
O
Sem tampão (para o caso de placa cega)
O
O
O
O
O
O
O
Outros opcionais mecânicos
Resfriamento
TFVE (ventilação externa)
P
P
P
P
P
P
P
TFVE com carenagem em aço
O
O
O
O
O
O
O
TFVE com carenagem em fibra
O
O
O
O
O
O
O
TFVF (ventilação forçada)
O
O
O
O
O
O
O
TFVF com carenagem em aço
E
E
E
E
E
E
E
TFVF com carenagem em fibra
E
E
E
E
E
E
E
Pintura Interna
Pintura Interna Tropicalizada (Epóxi)
O
O
O
O
O
O
O
Dreno
Dreno plástico Aberto (Automático)
P
P
P
P
P
P
P
Dreno plástico Fechado
O
O
O
O
O
O
O
Material do Parafuso
Parafuso Inox
O
O
O
O
O
O
O
Saída de graxa
Saída de graxa por gaveta de plástico
P
P
P
P
P
P
P
Saída de graxa por mola
E
E
E
E
E
E
E
Uso com inversor de frequencia
Kit ventilação forçada
Kit de ventilação forçada apto a encoder
O
O
O
O
O
O
O
Kit de ventilação forçada não apto a encoder
O
O
O
O
O
O
O
Tensão do kit
208-230/460V
O
O
O
O
O
O
O
220-240/380-415V
O
O
O
O
O
O
O
220/380-440V
O
O
O
O
O
O
O
380-415/660V
O
O
O
O
O
O
O
525-550V
O
O
O
O
O
O
O
575V
O
O
O
O
O
O
O
220/380
O
O
O
O
O
O
O
220/440
O
O
O
O
O
O
O
230/460V
O
O
O
O
O
O
O
240/480V
O
O
O
O
O
O
O
380/660V
O
O
O
O
O
O
O
400/690V
O
O
O
O
O
O
O
440V
O
O
O
O
O
O
O
460V
O
O
O
O
O
O
O
480V
O
O
O
O
O
O
O
Encoder
Sem encoder
P
P
P
P
P
P
P
Com encoder HS 35
O
O
O
O
O
O
O
Leine&Linde XH861 900220
E
E
E
E
E
E
E
Escova aterramento
Kit porta escova dianteira
O
O
O
O
O
O
O
Defletoras de ar
Material da Defletora p/ mancal de bucha e mancal de rolamento com ventilação forçada
Chapa de Aço (2 pólos horizontal )
P
P
P
P
P
P
P
Chapa de Aço (4 ou mais pólos)
O
O
O
O
O
O
O
Material da Defletora p/ mancal de rolamento sem vent. Forçada
Chapa de Aço (2 pólos horizontal )
NA
NA
NA
NA
NA
NA
P
Chapa de Aço (4 ou mais pólos)
NA
NA
NA
NA
NA
NA
P
Ferro fundido
P
P
P
P
P
P
NA
Atenuador de ruído p/ mancal de rolamento sem vent. Forçada
Sem Atenuador de ruído
P
P
P
P
P
P
P
Com Atenuador de ruído
NA
NA
NA
NA
NA
NA
O
Outros opcionais elétricos
Proteção do mancal
Protetor Térmico Bimetálico (termostato) - Dianteiro/Traseiro
O
O
O
O
O
O
O
PT100 3 fios - Dianteiro/Traseiro
P
P
P
P
P
P
P
PT100 3 fios Calibrado - Dianteiro/Traseiro
O
O
O
O
O
O
O
2 PT100 3 fios - Dianteiro/Traseiro
O
O
O
O
O
O
O
2 PT100 3 fios Calibrado - Dianteiro/Traseiro
O
O
O
O
O
O
O
Sentido de rotação
Ambos (4 a 8 pólos)
P
P
P
P
P
P
P
Horário (2 pólos)
P
P
P
P
P
P
P
Horário (4 a 8 pólos)
O
O
O
O
O
O
O
Anti-horário
O
O
O
O
O
O
O
Placa indicando sentido de rotação
P
P
P
P
P
P
P
Impregnação - Tipo de Impregnação
Baixa Tensão - Fluxo contínuo de resina (Gotejamento)
P
P
P
P
P
P
P
Alta Tensão - VPI
P
P
P
P
P
P
P
Alta Tensão - Dupla impregnação a vácuo (VPI)
O
O
O
O
O
O
O
Alta Tensão - Bobinas seladas (2xVPI+Pulver)
O
O
O
O
O
O
O
Vibração
Nível de Vibração
Grau A
P
P
P
P
P
P
P
Grau B
O
O
O
O
O
O
O
Sensor de Vibração
Apto a sensor SPM
O
O
O
O
O
O
O
Legenda: P (padrão), O (opcional), ND (Não Aplicável), E (consultar WEG)
*opcional na carcaça 400 apenas para motores verticais - neste caso rolamentos de rolos não se aplicam
1) padroes para motores verticais
2) padrões para motores com mancais de deslizamento
1/1
500
560
630
500
560
630
NA
P
O
O
NA
NA
P
E
NA
NA
P
E
P
NA
O
O
O
NA
P
NA
E
O
NA
P
NA
E
O
P
P
P
O
P
O
P
O
P
P
O
O
P
O
O
P
O
O
P
O
O
O
E
E
P
O
O
O
E
E
P
O
O
O
E
E
O
O
O
P
O
P
O
P
O
O
O
O
P
E
P
E
P
E
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
P
O
E
P
O
E
P
O
E
O
O
O
NA
P
NA
P
NA
P
NA
P
NA
NA
P
NA
NA
P
NA
P
O
P
O
P
O
O
P
O
O
O
O
P
O
O
O
O
P
O
O
O
P
E
O
O
P
P
E
O
O
P
P
E
O
O
P
P
P
O
O
P
P
O
O
P
P
O
O
P
O
P
O
P
O
O
O
O
Eletrical Data - EUA/Canadá Market 60Hz - Voltages 440V- 4160V- 6600V
Output
Frame
Full Load
Torque
(ft.lb)
Locked
Rotor
Current
Code Il/In
Locked
Rotor
Torque
Tl/Tn
Breakdown
Torque
Tb/Tn
Inercia J
(sq.ft.lb)
Allowable
locked rotor
Weight
time (s)
(lb)
Col
Hot
d
Sound
dB(A)
440 V
% of full load
Efficiency
Power Factor
Rate
d
spee
d
50
75
100
50
75
100
Full load
current In
(A)
Maximum
Load
Inercia
(sq.ft.lb)
(1)
HP
kW
II Pólos - 3600 RPM - 60HZ
300 220 5009/10/11TS
350 260 5009/10/11TS
400 300 5009/10/11TS
450 330 5009/10/11TS
500 370 5810/11/12TS
600 440 5810/11/12TS
700 515 5810/11/12TS
800 590
6806/7/8TS
900 660
6806/7/8TS
1000 750
6806/7/8TS
434
507
579
652
725
869
1014
1158
1302
1447
F
F
G
G
F
F
F
G
G
H
6.5
6.5
6.5
6.8
6.0
6.5
6.5
6.7
6.9
7.4
0.9
0.9
1.0
1.0
0.9
0.9
0.9
1.3
1.3
1.4
2.5
2.5
2.5
2.5
2.4
2.2
2.3
2.4
2.4
2.5
70.2
82.3
92.5
103
123
145
170
261
282
305
28
24
24
24
45
36
45
26
26
26
62
53
53
53
99
79
99
57
57
57
3528
3726
3903
4145
5292
5711
5954
7541
7828
8159
79.0
79.0
79.0
79.0
86.0
86.0
86.0
89.0
89.0
89.0
3581
3579
3577
3575
3573
3577
3576
3580
3580
3580
94.4
94.8
95.2
95.6
95.6
95.7
96.0
95.5
95.7
95.9
95.3
95.5
96.0
96.2
96.2
96.4
96.7
96.3
96.4
96.5
95.6
95.7
96.1
96.3
96.3
96.5
96.6
96.5
96.6
96.7
0.84
0.85
0.86
0.85
0.86
0.87
0.88
0.84
0.85
0.85
0.89
0.89
0.89
0.89
0.89
0.89
0.91
0.90
0.90
0.90
0.90
0.91
0.90
0.91
0.90
0.91
0.92
0.91
0.91
0.91
321
375
435
473
536
628
727
844
942
1070
789
778
934
1053
2087
1779
2778
2147
2425
2936
IV Pólos - 1800 RPM - 60HZ
350 260 5009/10/11T
400 300 5009/10/11T
450 330 5009/10/11T
500 370 5009/10/11T
600 440 5009/10/11T
700 515 5810/11/12T
800 590
6806/7/8T
900 660
6806/7/8T
1000 750 6809/10/11T
1100 800 6809/10/11T
1250 900
7006/10
1350 1000
7006/10
1500 1100
7006/10
1016
1162
1307
1452
1743
2028
2318
2608
2898
3184
3614
3903
4337
H
H
G
G
G
G
H
H
H
H
G
H
G
7.0
7.0
7.0
6.8
7.0
6.5
7.3
7.3
7.3
7.8
7.0
7.3
7.0
1.2
1.3
1.3
1.3
1.4
1.5
1.2
1.5
1.5
1.5
0.7
0.7
0.7
2.4
2.5
2.5
2.5
2.5
2.3
2.1
2.2
2.1
2.1
2.4
2.4
2.4
117
136
150
166
194
327
380
434
475
503
523
594
629
22
20
19
19
16
33
17
16
18
18
20
20
20
48
44
42
42
35
73
37
35
40
40
44
44
44
3749
3969
4123
4234
4542
6395
7828
8269
9768
9923
11301
11962
12293
79.0
79.0
79.0
79.0
79.0
83.0
83.0
83.0
83.0
83.0
90.0
90.0
90.0
1784
1784
1784
1784
1783
1788
1788
1788
1788
1790
1792
1792
1792
94.7
95.0
95.2
95.4
95.5
95.9
96.0
96.0
96.3
96.3
95.8
96.0
96.1
95.5
95.7
95.8
96.0
96.1
96.5
96.7
96.8
97.0
97.0
96.5
96.7
96.8
95.8
96.0
96.1
96.1
96.3
96.6
96.9
97.0
97.0
97.0
96.6
96.8
96.9
0.75
0.75
0.75
0.76
0.77
0.79
0.74
0.76
0.76
0.74
0.76
0.76
0.76
0.83
0.83
0.83
0.84
0.84
0.85
0.82
0.82
0.83
0.82
0.84
0.84
0.84
0.86
0.86
0.86
0.86
0.87
0.87
0.85
0.85
0.86
0.85
0.87
0.87
0.87
396
456
501
561
659
769
899
1000
1130
1210
1350
1490
1640
3331,756
3737,911
3989,45
4432,686
4630,283
10803,71
4955,244
6248,042
7555,536
8310,202
8349,098
8987,572
10018,01
VI Pólos - 1200 RPM - 60HZ
250 185 5009/10/11T
300 220 5009/10/11T
350 260 5009/10/11T
400 300
5807/8/9T
450 330
5807/8/9T
500 370 5810/11/12T
600 440 5810/11/12T
700 515
6806/7/8T
800 590
6806/7/8T
900 660 6809/10/11T
1000 750
7006/10
1100 800
7006/10
1250 900
7006/10
1350 1000
7006/10
1092
1311
1529
1744
1962
2181
2617
3042
3477
3912
4343
4773
5424
5858
F
F
F
G
F
F
F
G
G
G
G
G
G
G
6.1
6.1
6.1
6.1
6.1
6.2
6.1
6.3
6.3
6.5
6.5
6.5
6.7
6.5
1.2
1.3
1.3
1.2
1.2
1.3
1.3
1.3
1.3
1.4
0.7
0.7
0.7
0.7
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.2
2.4
2.3
2.3
2.3
2.3
177
208
244
282
311
339
396
522
589
663
888
947
1050
1050
17
16
16
26
26
26
25
18
20
20
20
20
20
20
37
35
35
57
57
57
55
40
44
44
44
44
44
44
3649
3903
4101
4862
5072
5954
6395
7971
8379
10011
11958
12293
12954
12954
77.0
77.0
77.0
81.0
81.0
81.0
81.0
81.0
81.0
81.0
88.0
88.0
88.0
88.0
1186
1186
1186
1188
1188
1188
1188
1192
1192
1192
1193
1194
1194
1194
94.3
94.7
94.9
95.2
95.4
95.5
95.6
96.1
96.1
96.2
96.6
96.6
96.7
96.8
94.8
95.2
95.4
95.9
95.9
96.2
96.3
96.5
96.5
96.6
96.8
96.8
96.9
97.0
94.9
95.1
95.4
95.8
95.9
96.2
96.3
96.5
96.5
96.6
96.8
96.8
96.9
97.0
0.75
0.77
0.77
0.74
0.75
0.75
0.75
0.71
0.69
0.69
0.78
0.78
0.76
0.76
0.84
0.84
0.85
0.83
0.83
0.83
0.83
0.81
0.80
0.80
0.84
0.84
0.84
0.84
0.86
0.87
0.87
0.85
0.85
0.86
0.86
0.85
0.84
0.84
0.87
0.87
0.86
0.86
284
334
393
462
508
561
667
788
913
1020
1120
1200
1360
1500
4304,628
5051,523
5890,104
10646,29
11983,33
13855,52
15981,05
13138,41
14824,1
18856,15
14321,73
15754,64
17929,62
19448,26
VIII Pólos - 900 RPM - 60HZ
200 150 5009/10/11T
250 185 5009/10/11T
300 220 5009/10/11T
350 260
5807/8/9T
400 300
5807/8/9T
450 330 5810/11/12T
500 370 5810/11/12T
600 440
6806/7/8T
700 515
6806/7/8T
800 590 6809/10/11T
850 630
7006/10
900 660
7006/10
1000 750
7006/10
1166
1459
1748
2033
2326
2614
2904
3481
4061
4641
4920
5210
5789
F
F
F
F
F
F
G
G
G
G
F
F
F
5.5
5.5
5.5
5.5
5.5
5.7
6.3
6.6
6.6
6.6
5.9
5.9
5.9
1.2
1.2
1.2
1.2
1.2
1.2
1.3
1.1
1.1
1.1
0.7
0.7
0.7
2.4
2.3
2.5
2.3
2.3
2.3
2.4
2.3
2.3
2.3
2.1
2.1
2.1
199
240
282
373
418
477
581
777
886
1050
1260
1350
1530
24
26
21
21
23
17
17
22
22
22
26
26
26
53
57
46
46
51
37
37
48
48
48
57
57
57
3815
4112
4421
4961
5182
6218
6549
7938
8379
10231
12293
12619
13417
75.0
75.0
75.0
79.0
79.0
79.0
79.0
79.0
79.0
79.0
82.0
82.0
82.0
889
888
889
892
891
892
892
893
893
893
895
895
895
94.1
94.5
94.9
95.0
95.3
95.4
95.4
95.1
95.2
95.4
96.1
96.1
96.3
94.7
95.1
95.3
95.5
95.8
96.0
96.0
95.8
95.9
96.1
96.5
96.5
96.6
94.7
95.1
95.3
95.5
95.7
95.9
96.0
96.1
96.2
96.4
96.5
96.5
96.6
0.68
0.70
0.68
0.68
0.68
0.68
0.67
0.67
0.67
0.67
0.70
0.70
0.72
0.78
0.78
0.78
0.78
0.78
0.78
0.77
0.78
0.78
0.78
0.80
0.80
0.81
0.82
0.82
0.82
0.82
0.82
0.82
0.82
0.82
0.82
0.82
0.84
0.84
0.85
242
297
353
417
480
527
590
701
820
936
976
1020
1150
8465,608
11046,18
11540,46
12272,13
15445,22
12684,98
15265,36
20931,78
24439,87
27892,96
25436,36
26919,93
29881,63
X Pólos - 720 RPM - 60HZ
125
90
5006/7/8T
150 110
5006/7/8T
175 132 5009/10/11T
200 150 5009/10/11T
250 185
5807/8/9T
300 220 5810/11/12T
350 260 5810/11/12T
400 300
6806/7/8T
450 330
6806/7/8T
500 370
6806/7/8T
550 400
6806/7/8T
600 440
6806/7/8T
650 480
7006/10
700 515
7006/10
750 560
7006/10
800 590
7006/10
850 630
7006/10
912
1095
1277
1459
1817
2180
2543
2902
3265
3628
3991
4354
4716
5079
5442
5805
6168
G
G
H
H
H
G
H
F
F
F
F
F
G
G
G
G
G
5.5
5.5
5.5
5.8
5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.5
6.2
6.2
6.2
6.2
6.2
1.5
1.5
1.5
1.6
1.3
1.3
1.3
1.0
1.0
1.0
1.0
1.0
0.8
0.8
0.8
0.8
0.8
2.0
2.0
2.0
2.0
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
164
199
239
283
402
462
566
630
739
794
784
958
1470
1570
1660
1780
1900
15
15
15
15
20
20
20
22
22
22
22
22
25
25
25
25
25
33
33
33
33
44
44
44
48
48
48
48
48
55
55
55
55
55
3418
3638
4079
4366
5072
5954
6615
7365
7894
8136
8666
8930
10518
10805
11069
11356
11698
80.0
80.0
80.0
80.0
82.0
82.0
82.0
82.0
82.0
82.0
82.0
82.0
82.0
82.0
82.0
82.0
82.0
710
710
710
710
713
713
713
714
714
714
714
714
714
714
714
714
714
91.8
92.2
92.6
92.8
93.0
93.3
93.6
94.9
95.1
95.3
95.5
95.7
95.6
95.7
95.7
95.8
95.8
93.0
93.3
93.6
93.9
94.0
94.3
94.6
95.6
95.8
96.0
96.2
96.4
96.1
96.2
96.2
96.4
96.4
93.0
93.3
93.6
93.9
94.2
94.5
94.8
95.6
95.8
96.0
96.2
96.4
96.1
96.2
96.2
96.4
96.4
0.51
0.51
0.51
0.51
0.48
0.49
0.49
0.60
0.60
0.60
0.60
0.60
0.67
0.67
0.67
0.67
0.67
0.63
0.63
0.63
0.63
0.60
0.61
0.61
0.72
0.72
0.72
0.72
0.72
0.77
0.77
0.77
0.77
0.77
0.70
0.70
0.70
0.70
0.67
0.68
0.68
0.78
0.78
0.78
0.78
0.78
0.81
0.81
0.81
0.81
0.81
173
211
253
286
368
429
506
505
554
620
669
735
774
829
902
948
1010
4926,485
5912,931
6888,796
8201,557
13063,63
15693,8
18279,96
20027,26
22502,2
25031,13
27625,07
30035,01
33025,11
35580,27
38145,43
40680,59
43215,74
Output
Frame
Full Load
Torque
(ft.lb)
Locked
Rotor
Current
Code Il/In
Locked
Rotor
Torque
Tl/Tn
Breakdown
Torque
Tb/Tn
Inercia J
(sq.ft.lb)
Allowable
locked rotor
Weight
time (s)
(lb)
Col
Hot
d
Sound
dB(A)
440 V
% of full load
Efficiency
Power Factor
Rate
d
spee
d
50
75
100
50
75
100
Full load
current In
(A)
Maximum
Load
Inercia
(sq.ft.lb)
(1)
HP
kW
XII Pólos - 600 RPM - 60HZ
175 132
5807/8/9T
200 150
5807/8/9T
250 185 5810/11/12T
300 220
6806/7/8T
350 260
6806/7/8T
400 300 6809/10/11T
450 330
7006/10
500 370
7006/10
550 400
7006/10
600 440
7006/10
650 480
7006/10
700 515
7006/10
750 560
7006/10
1529
1747
2188
2625
3063
3495
3918
4354
4789
5224
5660
6095
6531
F
F
F
F
G
G
F
F
F
F
F
F
F
4.5
4.5
4.5
5.0
5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.5
1.2
1.2
1.2
1.0
1.0
0.9
0.8
0.8
0.8
0.8
0.8
0.8
0.8
1.7
1.7
1.7
2.0
2.0
2.0
1.9
1.9
1.9
1.9
1.9
1.9
1.9
430
451
539
800
838
1000
1400
1400
1500
1600
1710
1810
1910
20
20
20
20
20
20
40
40
40
40
40
40
40
44
44
44
44
44
44
88
88
88
88
88
88
88
5248
5336
6218
7629
8015
9570
10044
10253
10562
11135
11466
11709
12392
82.0
82.0
82.0
82.0
82.0
82.0
82.0
82.0
82.0
82.0
82.0
82.0
82.0
593
593
592
592
592
593
595
595
595
595
595
595
595
93.8
93.8
93.9
94.0
94.0
94.4
95.3
95.4
95.5
95.6
95.7
95.8
95.9
94.3
94.3
94.3
94.3
94.9
94.9
95.5
95.6
95.7
95.8
95.9
96.0
96.1
94.3
94.3
94.3
94.5
95.0
95.1
95.5
95.6
95.7
95.8
95.9
96.0
96.1
0.50
0.50
0.50
0.57
0.57
0.59
0.61
0.61
0.61
0.61
0.62
0.62
0.62
0.61
0.61
0.62
0.69
0.69
0.69
0.71
0.71
0.71
0.71
0.72
0.72
0.72
0.67
0.67
0.68
0.76
0.76
0.76
0.77
0.77
0.77
0.77
0.78
0.78
0.78
262
298
363
385
452
521
563
631
681
749
805
863
937
9772,385
11206,01
14085,28
17725,91
20779,09
22320,69
44884,59
50035,2
55073,99
60112,78
65153,39
70192,18
75242,79
High-Output Design
250 185 5009/10/11T
300 220 5810/11/12T
400 300 5810/11/12T
500 370 5009/10/11TS
500 370
6806/7/8T
800 590 5810/11/12TS
1824
2625
2907
725
2901
1159
H
F
H
G
G
G
5.8
4.5
5.5
6.8
6.6
7.6
1.6
1.2
1.3
1.0
1.1
0.8
2.0
1.7
2.2
2.5
2.3
2.4
327
611
626
120
668
188
15
20
20
20
22
35
33
44
44
44
48
77
4653
8622
6725
4520
7475
6218
80.0
82.0
82.0
79.0
79.0
86.0
710
592
713
3575
893
3575
93.0
94.0
93.6
95.8
95.0
96.0
94.0
94.3
94.6
96.3
95.6
96.7
94.0
94.3
94.8
96.4
95.9
96.7
0.51
0.50
0.49
0.85
0.67
0.86
0.63
0.62
0.61
0.89
0.78
0.90
0.70
0.68
0.68
0.91
0.82
0.91
353
430
584
529
590
832
10280,15
16934,12
20917,53
951,5785
17423,69
2433,359
Locked
Rotor
Torque
Tl/Tn
Breakdown
Torque
Tb/Tn
Inercia J
(sq.ft.lb)
NOTA
1) Para carga com torque parabólico
Output
Frame
Full Load
Torque
(ft.lb)
Locked
Rotor
Current
Code Il/In
Allowable
locked rotor
Weight
time (s)
(lb)
Col
Hot
d
Sound
dB(A)
4160 V
% of full load
Efficiency
Power Factor
Rate
d
spee
d
50
75
100
50
75
100
Full load
current In
(A)
Maximum
Load
Inercia
(sq.ft.lb)
(1)
HP
kW
II Pólos - 3600 RPM - 60HZ
300 220 5009/10/11TS
350 260 5009/10/11TS
400 300 5009/10/11TS
450 330 5009/10/11TS
500 370 5810/11/12TS
600 440 5810/11/12TS
800 590
6806/7/8TS
900 660
6806/7/8TS
1000 750 6809/10/11TS
1100 800 6809/10/11TS
1250 900 6809/10/11TS*
1350 1000
7006/10
1500 1100
7006/10
1700 1250
7006/10*
435
507
580
652
725
870
1158
1302
1447
1592
1809
1949
2166
2455
G
G
G
G
G
G
G
G
H
H
H
H
H
H
6.5
6.5
6.5
6.5
6.4
6.5
6.6
7.2
7.2
8.2
8.2
7.5
7.5
7.5
1.0
1.0
1.1
1.1
1.0
1.0
1.3
1.4
1.4
1.5
1.5
0.7
0.7
0.7
2.1
2.1
2.2
2.2
2.2
2.2
2.5
2.5
2.5
2.7
2.5
2.3
2.4
2.4
80.7
90.2
94.9
104
131
152
242
254
304
323
363
598
631
631
20
18
15
15
20
20
20
20
20
20
20
20
20
20
44
40
33
33
44
44
44
44
44
44
44
44
44
44
3749
3969
4201
4366
5601
5887
7497
7607
9261
9812
10088
11958
12288
12288
79.0
79.0
79.0
79.0
86.0
86.0
89.0
89.0
89.0
89.0
89.0
90.0
90.0
90.0
3573
3575
3575
3575
3574
3574
3578
3580
3580
3580
3580
3588
3588
3588
93.3
93.8
94.2
94.6
93.8
94.3
94.5
95.0
95.4
95.6
95.8
95.3
95.5
95.6
94.2
94.7
95.0
95.1
94.8
95.1
95.4
95.6
95.9
96.1
96.3
96.1
96.2
96.3
94.2
94.7
95.0
95.1
94.9
95.2
95.5
95.7
96.0
96.2
96.4
96.3
96.4
96.5
0.83
0.83
0.83
0.83
0.83
0.83
0.80
0.80
0.81
0.81
0.81
0.84
0.84
0.84
0.88
0.88
0.88
0.88
0.88
0.88
0.86
0.85
0.86
0.86
0.86
0.89
0.89
0.89
0.89
0.89
0.89
0.89
0.89
0.89
0.88
0.88
0.88
0.88
0.88
0.90
0.90
0.90
36.4
42.8
49.2
54.1
60.8
72.1
97.4
109
123
131
147
160
176
200
455
472
494
558
807
973
1680
1990
2190
2720
2870
1670
2020
2380
IV Pólos - 1800 RPM - 60HZ
150 110
5006/7/8T
200 150 5009/10/11T
250 185 5009/10/11T
300 220 5009/10/11T
350 260 5009/10/11T
400 300 5009/10/11T
450 330 5009/10/11T
500 370 5009/10/11T
600 440 5810/11/12T
700 515 5810/11/12T
800 590
6806/7/8T
900 660
6806/7/8T
1000 750 6809/10/11T
1100 810 6809/10/11T
1250 900 6809/10/11T
1350 1000
7006/10
1500 1100
7006/10
1700 1250
7006/10
2250 1700
8006
2500 1800
8006
2750 2000
8009
3000 2250
8806
3500 2600
8808
3700 2750
9606
4000 3000
9606
4500 3300
9609
437
581
727
872
1018
1162
1307
1453
1740
2028
2315
2605
2894
3184
3618
3905
4339
4918
6498,80814
7220,89794
7942,98773
8655,42284
10097,9933
10675,0215
11540,5638
12983,1343
G
G
G
F
G
G
G
H
G
G
H
H
H
J
H
G
G
G
H
H
H
H
H
G
G
G
6.0
6.0
6.1
6.0
6.2
6.5
6.5
7.0
6.6
6.8
7.0
7.1
7.2
7.8
7.5
6.5
6.5
6.5
7,2
7,2
7,2
7,2
7,2
6,6
6,7
6,7
1.2
1.4
1.4
1.4
1.5
1.6
1.6
1.6
1.5
1.5
1.5
1.5
1.5
1.5
1.5
0.7
0.7
0.7
0,8
0,8
0,8
0,6
0,6
0,7
0,7
0,7
2.1
2.1
2.1
2.1
2.1
2.2
2.2
2.2
2.2
2.2
2.4
2.4
2.4
2.4
2.4
2.4
2.4
2.4
2,5
2,5
2,5
2,5
2,5
2,4
2,4
2,4
69.5
77.1
94.9
105
121
157
170
183
275
317
464
499
569
604
639
554
592
664
970,84
1092,2
1213,55
2119,9
2355,44
4755,52
5349,96
6029,32
15
15
15
15
15
15
15
14
16
20
20
20
20
20
20
20
20
20
18
18
18
26
26
27
27
27
33
33
33
33
33
33
33
31
35
44
44
44
44
44
44
44
44
44
40
40
40
57
57
59
59
59
3087
3153
3352
3462
3859
4256
4300
4542
6053
6395
7718
8159
9548
9790
10011
11742
11962
12619
14785
15750
16715
21860
23220
27040
28680
30555
79.0
79.0
79.0
79.0
79.0
79.0
79.0
79.0
83.0
83.0
83.0
83.0
83.0
83.0
83.0
90.0
90.0
90.0
90
90
90
90
90
90
90
90
1780
1782
1782
1782
1782
1783
1784
1783
1787
1788
1790
1790
1790
1790
1790
1791
1791
1791
1793
1793
1793
1795
1795
1795
1795
1795
91.1
92.4
93.4
93.7
93.8
94.2
94.3
94.5
94.8
94.9
94.8
95.0
95.3
95.3
95.5
95.6
95.7
95.9
96,3
96,4
96,5
95,9
96
95,9
96
96,1
92.5
93.6
94.0
94.4
94.6
94.7
94.9
94.9
95.5
95.6
95.7
95.9
96.0
96.0
96.2
96.3
96.4
96.5
96,7
96,8
96,9
96,5
96,6
96,5
96,6
96,7
92.7
93.6
94.0
94.5
94.8
94.8
95.1
95.3
95.6
95.7
95.8
96.0
96.1
96.1
96.3
96.4
96.5
96.5
96,7
96,8
96,9
96,7
96,8
96,6
96,7
96,8
0.70
0.74
0.74
0.74
0.75
0.73
0.73
0.74
0.75
0.75
0.73
0.73
0.73
0.71
0.71
0.79
0.79
0.79
0,77
0,77
0,77
0,78
0,78
0,84
0,84
0,84
0.78
0.82
0.82
0.82
0.83
0.83
0.82
0.82
0.83
0.83
0.82
0.82
0.82
0.80
0.80
0.85
0.85
0.85
0,84
0,84
0,84
0,85
0,85
0,89
0,89
0,89
0.83
0.85
0.85
0.86
0.86
0.86
0.86
0.86
0.86
0.86
0.85
0.85
0.85
0.84
0.84
0.87
0.87
0.87
0,87
0,87
0,87
0,87
0,87
0,9
0,9
0,9
19.8
26.2
32.1
37.6
44.3
51.1
56.0
62.7
74.3
86.8
101
112
127
139
154
165
182
207
276,9
307,3
337,7
369,2
430,3
440,6
475,9
534,8
821
1220
1520
1830
2240
2750
3100
3210
4180
6180
7520
8480
9410
10400
11800
9040
10100
11400
14822,91
16456,41
18089,93
25456,88
29817,47
30564
32833,31
36926,86
VI Pólos - 1200 RPM - 60HZ
200 150 5009/10/11T
250 185 5009/10/11T
300 220 5009/10/11T
350 260 5009/10/11T
400 300
5807/8/9T
450 330
5807/8/9T
500 370 5810/11/12T
600 440 5810/11/12T
700 515
6806/7/8T
800 590
6806/7/8T
900 660 6809/10/11T
1000 750 6809/10/11T
1100 800
7006/10
1250 900
7006/10
1350 1000
7006/10
1500 1100
7006/10
2000 1500
8006
2250 1700
8008
2500 1800
8806
2750 2000
8806
3000 2250
8808
3500 2600
9609
877
1097
1315
1532
1743
1961
2179
2612
3048
3483
3918
4354
4781
5428
5863
6509
8660,24749
9742,77843
10834,3682
11917,805
13001,2418
15168,1155
G
G
G
H
G
G
G
H
H
H
H
H
F
F
G
G
H
H
G
G
G
G
6.0
6.2
6.2
7.0
6.0
6.0
6.0
6.7
6.8
6.9
7.0
6.8
5.9
6.1
6.3
6.8
6,8
6,8
6,4
6,4
6,4
6,2
1.6
1.6
1.6
1.8
1.2
1.2
1.2
1.3
1.4
1.4
1.4
1.4
0.8
0.8
0.8
0.8
1,1
1,1
0,7
0,7
0,7
0,9
2.0
2.0
2.0
2.2
2.0
2.0
2.1
2.3
2.4
2.4
2.4
2.4
2.4
2.4
2.4
2.4
2,4
2,4
2,2
2,2
2,2
2,1
173
198
257
278
269
328
355
436
471
543
614
685
790
897
952
1010
2042,74
2334,56
2802,98
3114,43
3503,73
6148,21
14
12
12
10
18
18
18
18
20
20
20
20
23
23
23
17
19
19
30
30
30
17
31
26
26
22
40
40
40
40
44
44
44
44
51
51
51
37
42
42
66
66
66
37
3550
3837
4123
4278
4873
5248
6042
6505
7718
8159
9790
10231
11296
11958
12293
12624
15860
17120
19230
20300
21640
28025
77.0
77.0
77.0
77.0
81.0
81.0
81.0
81.0
81.0
81.0
81.0
81.0
88.0
88.0
88.0
88.0
88
88
90
90
90
90
1181
1181
1182
1184
1189
1189
1189
1190
1190
1190
1190
1190
1192
1193
1193
1194
1196
1196
1195
1195
1195
1195
92.8
93.2
93.4
93.6
94.4
94.4
94.8
94.8
94.9
95.2
95.4
95.6
95.9
96.1
96.1
96.1
96,2
96,4
96,8
97
97,2
96,8
93.1
93.5
93.8
94.0
94.8
94.9
95.0
95.2
95.5
95.6
95.8
96.0
96.3
96.4
96.5
96.5
96,6
96,8
96,9
97,1
97,3
97,1
93.0
93.5
93.8
94.0
94.8
95.0
95.1
95.2
95.6
95.8
96.0
96.1
96.3
96.4
96.5
96.5
96,4
96,6
96,8
97
97,2
97,1
0.71
0.71
0.71
0.69
0.67
0.67
0.69
0.66
0.69
0.71
0.71
0.71
0.77
0.76
0.75
0.74
0,68
0,68
0,78
0,78
0,78
0,76
0.80
0.80
0.80
0.79
0.77
0.77
0.78
0.76
0.79
0.80
0.80
0.80
0.84
0.83
0.83
0.80
0,78
0,78
0,84
0,84
0,84
0,82
0.83
0.83
0.83
0.83
0.81
0.81
0.82
0.81
0.83
0.84
0.84
0.84
0.86
0.86
0.86
0.84
0,82
0,82
0,86
0,86
0,86
0,84
27.0
33.1
39.2
46.3
54.2
59.5
65.8
79.2
90.1
102
114
129
134
151
167
188
262
294,1
310,9
341,3
371,6
444,3
2690
2870
3420
3850
5830
6530
7630
10400
14800
16900
19000
21100
20500
23300
25200
20400
34305,58
38557,3
51008,62
56078,33
61070,2
38928,82
Output
Frame
HP
kW
VIII Pólos - 900 RPM - 60HZ
175 132 5009/10/11T
200 150 5009/10/11T
250 185 5009/10/11T
300 220 5009/10/11T
350 260
5807/8/9T
400 300 5810/11/12T
450 330 5810/11/12T
500 370
6806/7/8T
600 440
6806/7/8T
700 515 6809/10/11T
800 590 6809/10/11T
900 660 6809/10/11T*
950 700
7006/10
1000 750
7006/10
1100 800
7006/10
1350 1000
8006
1500 1100
8009
1750 1250
8806
2000 1500
8806
2250 1700
8808
2500 1800
9606
2750 2000
9606
3000 2250
9609
Full Load
Torque
(ft.lb)
Locked
Rotor
Current
Code Il/In
Locked
Rotor
Torque
Tl/Tn
Breakdown
Torque
Tb/Tn
Inercia J
(sq.ft.lb)
Allowable
locked rotor
Weight
time (s)
(lb)
Col
Hot
d
Sound
dB(A)
4160 V
% of full load
Efficiency
Power Factor
Rate
d
spee
d
50
75
100
50
75
100
Full load
current In
(A)
Maximum
Load
Inercia
(sq.ft.lb)
(1)
1021
1166
1457
1748
2035
2326
2620
2907
3489
4066
4647
5227
5499
5795
6375
7811,64
8679,6
10114,8984
11559,8839
13004,8694
14449,8549
15894,8404
17339,8259
G
H
H
G
G
G
G
G
G
G
H
G
G
G
G
G
G
H
H
H
F
F
F
5.8
5.9
6.1
6.1
6.0
6.0
6.0
6.4
6.4
6.6
6.6
6.6
6.1
6.1
6.2
5,9
5,9
7,1
7,1
7,1
5,5
5,5
5,5
1.2
1.2
1.3
1.3
1.3
1.3
1.3
1.0
1.0
1.2
1.2
1.2
0.7
0.7
0.7
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
2.5
2.5
2.5
2.5
2.2
2.2
2.2
2.3
2.3
2.5
2.5
2.5
2.2
2.2
2.2
1,9
1,9
2,2
2,2
2,2
1,6
1,6
1,6
186
199
240
301
335
411
465
722
777
941
1050
1100
1300
1370
1450
2641,23
2958,18
5459,2
6114,3
6987,77
8095,92
8995,47
10119,9
12
12
12
12
22
22
22
22
22
22
22
22
30
30
30
34
34
32
32
32
25
25
25
26
26
26
26
48
48
48
48
48
48
48
48
66
66
66
75
75
70
70
70
55
55
55
3616
3815
4079
4498
5292
6218
6725
7718
7938
9790
10231
10562
12293
12624
12954
16000
17075
19740
20955
22580
26100
27455
29145
75.0
75.0
75.0
75.0
79.0
79.0
79.0
79.0
79.0
79.0
79.0
79.0
82.0
82.0
82.0
85
85
85
85
85
85
85
85
888
889
889
889
891
891
890
891
891
892
892
892
895
894
894
895
895
896
896
896
896
896
896
92.2
92.4
92.5
92.9
94.2
94.4
94.7
95.0
95.2
95.4
95.6
95.7
95.7
95.8
95.9
95,6
95,8
95,8
96
96,2
96
96,2
96,4
92.7
93.0
93.0
93.4
94.7
94.8
94.9
95.2
95.4
95.6
95.8
96.0
96.0
96.1
96.2
96
96,2
96,2
96,4
96,6
96,4
96,6
96,8
92.7
93.0
93.0
93.4
94.7
94.8
94.9
95.2
95.4
95.6
95.8
96.0
96.0
96.1
96.2
95,8
96
96
96,2
96,4
96,3
96,5
96,7
0.58
0.56
0.58
0.57
0.60
0.63
0.64
0.70
0.70
0.68
0.68
0.67
0.69
0.69
0.70
0,69
0,69
0,77
0,77
0,77
0,76
0,76
0,76
0.69
0.68
0.69
0.68
0.71
0.74
0.75
0.79
0.79
0.78
0.78
0.77
0.79
0.79
0.79
0,78
0,78
0,83
0,83
0,83
0,81
0,81
0,81
0.76
0.75
0.76
0.76
0.77
0.79
0.79
0.82
0.82
0.81
0.81
0.81
0.82
0.82
0.82
0,81
0,81
0,86
0,86
0,86
0,83
0,83
0,83
26.0
29.8
36.3
43.0
49.5
55.6
61.1
65.8
78.1
92.3
106
118
123
132
141
180,1
199,7
219,5
250,3
281
323,8
355,5
387
3760
4310
5610
6720
12900
14800
16600
16700
20100
27800
31800
35800
35200
37100
40900
49505,52
54982,65
70005,82
80131,43
90038,68
49374,88
54222,42
58845,07
X Pólos - 720 RPM - 60HZ
175 132
5807/8/9T
1277
200 150 5810/11/12T
1459
250 185 5810/11/12T
1824
300 220 5810/11/12T
2189
350 260
6806/7/8T
2543
400 300
6806/7/8T
2907
450 330
6806/7/8T
3270
500 370
6806/7/8T
3633
550 400
6806/7/8T
3996
600 440
7006/10
4360
650 480
7006/10
4723
700 515
7006/10
5086
750 560
7006/10
5450
800 590
7006/10
5813
850 630
7006/10
6176
900 660
8006
6527,93445
1000 750
8008
7253,2605
1250 900
8806
9041,25
1350 1000
8806
9764,55
1500 1100
8807
10849,5
1750 1250
9606
12657,75
2000 1500
9607
14466
J
H
H
H
G
G
G
G
F
F
F
F
F
F
F
F
F
G
G
G
E
E
5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.5
5,5
5,5
6
6
6
5,1
5,5
1.2
1.2
1.2
1.2
0.9
0.9
0.9
0.9
0.9
0.9
0.9
0.9
0.9
0.9
0.9
0,8
0,8
1
1
1
0,7
0,7
2.2
2.2
2.2
2.2
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
1,7
1,7
2,1
2,1
2,1
1,7
1,7
383
438
493
616
486
545
613
691
778
968
1020
1080
1210
1280
1360
2144,58
2416,43
4986,1
5540,11
6204,92
8487,08
9505,53
11
11
11
11
28
28
28
28
28
31
31
31
31
31
31
32
32
35
35
35
47
47
24
24
24
24
62
62
62
62
62
68
68
68
68
68
68
70
70
77
77
77
103
103
5292
5590
5887
6560
6472
6758
7089
7464
7894
10397
10650
10882
11477
11907
12172
13270
14060
18500
19490
20675
25175
26525
82.0
82.0
82.0
82.0
82.0
82.0
82.0
82.0
82.0
82.0
82.0
82.0
82.0
82.0
82.0
85
85
85
85
85
85
85
710
710
710
710
713
713
713
713
713
713
713
713
713
713
713
714
714
716
716
716
716
716
91.3
91.6
91.8
92.1
93.9
94.1
94.3
94.5
94.7
95.1
95.2
95.3
95.5
95.6
95.7
95,8
96
95,4
95,6
95,8
95,8
96
92.5
92.8
93.0
93.3
94.6
94.8
95.0
95.2
95.4
95.4
95.5
95.6
95.8
95.9
96.0
95,8
96
95,9
96,1
96,3
96,1
96,3
92.7
93.0
93.2
93.5
94.6
94.8
95.0
95.2
95.4
95.4
95.5
95.6
95.8
95.9
96.0
95,3
95,5
95,7
95,9
96,1
95,8
96
0.43
0.43
0.44
0.44
0.58
0.58
0.59
0.59
0.60
0.66
0.66
0.66
0.66
0.66
0.66
0,74
0,74
0,68
0,68
0,68
0,79
0,79
0.55
0.55
0.56
0.56
0.69
0.69
0.70
0.70
0.71
0.76
0.76
0.76
0.76
0.76
0.76
0,81
0,81
0,78
0,78
0,78
0,84
0,84
0.63
0.63
0.64
0.64
0.74
0.74
0.75
0.75
0.76
0.80
0.80
0.80
0.80
0.80
0.80
0,84
0,84
0,82
0,82
0,82
0,86
0,86
31.4
35.5
43.0
51.0
51.5
59.4
64.3
71.9
76.6
80.0
87.2
93.5
101
107
114
116,4
129,1
164,9
177,7
197,1
219,9
250,8
4630
5290
6660
7970
19300
22000
24800
27500
30300
36500
39600
42700
45700
48700
51800
42795,17
47516,62
92228,08
99451,21
110452,1
109951,3
125852,7
XII Pólos - 600 RPM - 60HZ
175 132
6806/7/8T
200 150
6806/7/8T
250 185
6806/7/8T
300 220
6806/7/8T
350 260
6806/7/8T
400 300
7006/10
450 330
7006/10
500 370
7006/10
550 400
7006/10
600 440
8006
700 515
8006
750 560
8009
800 590
8806
900 660
8806
1000 750
8807
1250 900
9606
1350 1000
9606
1500 1100
9609
1526
1744
2181
2617
3053
3495
3932
4368
4805
5222,34756
6092,73882
6527,93445
6951,44698
7820,37785
8689,30872
10861,6359
11730,5668
13033,9631
G
G
G
G
G
H
H
H
G
G
G
G
G
G
G
F
F
F
5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.5
5,6
5,6
5,5
5,6
5,6
5,6
5,5
5,5
5,5
1.1
1.1
1.1
1.1
1.1
1.0
1.0
1.0
1.0
0,7
0,7
0,7
1,1
1,1
1,1
0,8
0,8
0,8
2.3
2.3
2.3
2.3
2.3
2.0
2.0
2.0
2.0
1,6
1,6
1,6
1,8
1,8
1,8
1,8
1,8
1,8
440
503
566
707
786
896
1010
1140
1280
2153,63
2392,92
2680,07
4759,86
5364,29
6044,27
8687,15
9652,39
10810,7
25
25
25
25
25
50
50
50
50
47
47
47
39
39
39
48
48
48
55
55
55
55
55
110
110
110
110
103
103
103
86
86
86
106
106
106
5954
6218
6483
7078
7420
10099
10617
11212
11874
12190
12760
13445
17240
18210
19305
25240
26495
28005
82.0
82.0
82.0
82.0
82.0
82.0
82.0
82.0
82.0
85
85
85
85
85
85
85
85
85
594
594
594
594
594
593
593
593
593
595
595
595
596
596
596
596
596
596
91.9
92.2
92.5
92.8
93.1
93.9
94.1
94.3
94.5
94,6
94,8
95
93,9
94,1
94,3
95,7
95,9
96,1
93.4
93.6
93.8
94.2
94.4
94.8
95.0
95.2
95.4
94,9
95,1
95,3
94,8
95
95,2
95,9
96,1
96,3
93.4
93.6
93.8
94.2
94.4
94.8
95.0
95.2
95.4
94,5
94,7
94,9
94,7
94,9
95,1
95,6
95,8
96
0.51
0.51
0.51
0.51
0.51
0.48
0.48
0.48
0.48
0,64
0,64
0,64
0,61
0,61
0,61
0,73
0,73
0,73
0.64
0.64
0.64
0.64
0.64
0.60
0.60
0.60
0.60
0,73
0,73
0,73
0,72
0,72
0,72
0,81
0,81
0,81
0.71
0.71
0.71
0.71
0.71
0.67
0.67
0.67
0.67
0,77
0,77
0,77
0,77
0,77
0,77
0,84
0,84
0,84
27.6
31.3
38.6
45.7
53.8
65.6
72.0
80.5
86.9
85,4
99,4
106,3
113,6
127,5
141,4
161,2
173,7
192,6
15800
18100
22700
27200
31700
60700
68200
75800
83400
52086,84
60887,63
65120,52
85233,93
95878,73
106448
135354,5
145912,6
162039,3
High-Output Design
200 150
5006/7/8T
200 150
5006/7/8T
250 185
5006/7/8T
300 220
5006/7/8T
450 330 5810/11/12T
700 515 5810/11/12TS
1250 900
7006/10
581
877
727
872
1961
1015
7244
G
G
G
F
G
G
G
6.0
6.0
6.1
6.0
6.0
6.6
6.2
1.4
1.6
1.4
1.4
1.2
1.0
0.7
2.1
2.0
2.1
2.1
2.0
2.2
2.2
77.1
173
94.9
105
328
164
1550
15
14
15
15
18
20
30
33
31
33
33
40
44
66
3153
3550
3352
3462
5248
6092
13451
79.0
77.0
79.0
79.0
81.0
86.0
82.0
1782
1181
1782
1782
1189
3574
894
92.4
92.8
93.4
93.7
94.4
94.5
96.0
93.6
93.1
94.0
94.4
94.9
95.3
96.3
93.6
93.0
94.0
94.5
95.0
95.4
96.3
0.74
0.71
0.74
0.74
0.67
0.83
0.70
0.82
0.80
0.82
0.82
0.77
0.88
0.79
0.85
0.83
0.85
0.86
0.81
0.89
0.82
26.2
27.0
32.1
37.6
59.5
84.2
158
1220
2690
1520
1830
6530
1150
46500
NOTA
1) Para carga com torque parabólico
Output
Frame
Full Load
Torque
(ft.lb)
Locked
Rotor
Current
Code Il/In
Locked
Rotor
Torque
Tl/Tn
Breakdown
Torque
Tb/Tn
Inercia J
(sq.ft.lb)
Allowable
locked rotor
Weight
time (s)
(lb)
Col
Hot
d
Sound
dB(A)
6600 V
% of full load
Efficiency
Power Factor
Rate
d
spee
d
50
75
100
50
75
100
Full load
current In
(A)
Maximum
Load
Inercia
(sq.ft.lb)
(1)
HP
kW
II Pólos - 3600 RPM - 60HZ
300 220 5009/10/11TS
350 260 5009/10/11TS
400 300 5009/10/11TS
450 330 5009/10/11TS*
450 330 5810/11/12TS
500 370 5810/11/12TS
600 440 5810/11/12TS
800 590 6809/10/11TS
1100 800
7006/10
1250 900
7006/10
1350 1000
7006/10
437
507
580
652
652
724
869
1158
1589
1805
1949
G
G
H
G
G
G
G
G
H
G
H
7.0
6.3
7.0
6.6
6.5
6.5
6.6
7.2
7.5
7.5
7.5
1.2
1.0
1.1
1.1
1.0
1.0
1.0
1.3
0.6
0.6
0.6
2.5
2.3
2.3
2.3
2.3
2.3
2.3
2.5
2.2
2.3
2.3
82.3
87.8
92.5
97.3
133
140
152
285
565
598
598
14
18
15
12
22
22
20
20
12
12
12
31
40
33
26
48
48
44
44
26
26
26
3418
3903
3991
4079
5601
5711
5887
9107
11631
11962
11962
79.0
79.0
79.0
79.0
86.0
86.0
86.0
89.0
90.0
90.0
90.0
3560
3574
3576
3576
3576
3576
3577
3580
3587
3588
3588
93.2
93.5
93.7
94.0
93.5
93.6
94.0
94.8
94.7
94.9
95.1
94.4
94.4
94.7
94.9
94.9
95.0
95.2
95.6
95.7
95.9
96.1
94.5
94.6
94.9
95.0
95.1
95.2
95.4
95.8
96.0
96.2
96.4
0.86
0.80
0.78
0.78
0.83
0.83
0.81
0.80
0.83
0.83
0.83
0.90
0.86
0.85
0.85
0.87
0.87
0.87
0.86
0.89
0.89
0.89
0.91
0.88
0.87
0.87
0.89
0.89
0.89
0.88
0.90
0.90
0.90
22.4
27.3
31.8
34.9
34.1
38.2
45.3
61.2
81.0
90.9
101
409
531
523
457
838
939
1020
1640
428
596
692
IV Pólos - 1800 RPM - 60HZ
200 150 5009/10/11T
250 185 5009/10/11T
300 220 5009/10/11T
350 260 5009/10/11T
400 300 5009/10/11T
450 330 5009/10/11T
500 370 5810/11/12T
600 440 5810/11/12T
700 515
6806/7/8T
800 590 6809/10/11T
900 660 6809/10/11T
1000 750 6809/10/11T
1100 810 6809/10/11T
1250 900
7006/10
1350 1000
7006/10
1500 1100
7006/10
1700 1250
7006/10
2000 1500
8006
2250 1700
8006
2500 1800
8009
2750 2000
8806
3000 2250
8808
3500 2600
9606
3700 2750
9606
4000 3000
9609
580
725
870
1015
1160
1305
1449
1739
2026
2315
2605
2894
3184
3616
3905
4339
4918
5779,94196
6502,43471
7224,92746
7934,1376
8655,42284
10097,9933
10675,0215
11540,5638
H
H
H
H
H
H
H
H
H
H
G
H
G
G
G
G
G
G
G
G
H
H
G
G
G
6.8
6.8
6.9
6.9
6.8
7.0
6.9
7.1
7.0
7.0
7.0
7.0
7.0
6.6
6.5
6.5
6.5
6,6
6,6
6,6
7,4
7,4
6,6
6,6
6,6
1.4
1.4
1.4
1.4
1.4
1.6
1.5
1.5
1.5
1.5
1.5
1.5
1.5
0.7
0.7
0.7
0.7
0,7
0,7
0,7
0,6
0,6
0,7
0,7
0,7
2.4
2.4
2.4
2.4
2.4
2.4
2.4
2.4
2.3
2.3
2.3
2.3
2.3
2.3
2.3
2.3
2.3
2,3
2,3
2,3
2,5
2,5
2,4
2,4
2,4
105
105
113
129
157
170
254
296
464
534
569
639
674
556
592
664
698
943,87
1078,71
1213,55
1985,94
2234,18
4969,37
5565,69
6261,4
14
14
14
14
14
12
18
15
18
18
18
18
18
20
20
20
20
24
24
24
38
38
29
29
29
31
31
31
31
31
26
40
33
40
40
40
40
40
44
44
44
44
53
53
53
84
84
64
64
64
3638
3638
3726
3903
4212
4366
5887
6218
7861
9327
9548
10011
10231
11631
11962
12624
12954
14530
15600
16665
21030
22460
26290
27775
29505
79.0
79.0
79.0
79.0
79.0
79.0
83.0
83.0
83.0
83.0
83.0
83.0
83.0
90.0
90.0
90.0
90.0
90
90
90
90
90
90
90
90
1786
1786
1786
1786
1786
1786
1788
1788
1790
1790
1790
1790
1790
1791
1791
1791
1791
1792
1792
1792
1795
1795
1795
1795
1795
91.5
92.5
93.0
93.6
94.1
94.0
94.1
94.6
94.8
95.0
95.3
95.4
95.5
95.0
95.3
95.5
95.7
96,1
96,2
96,3
95,8
95,9
95,4
95,5
95,6
93.0
93.5
93.9
94.3
94.5
94.8
95.0
95.4
95.6
95.9
96.1
96.2
96.4
96.0
96.1
96.2
96.3
96,5
96,6
96,7
96,4
96,5
96,2
96,3
96,4
93.2
93.7
93.8
94.3
94.5
94.9
95.1
95.5
95.7
96.0
96.1
96.2
96.4
96.2
96.3
96.4
96.5
96,3
96,4
96,5
96,6
96,7
96,4
96,5
96,6
0.67
0.68
0.69
0.71
0.73
0.70
0.71
0.72
0.72
0.72
0.75
0.75
0.75
0.77
0.77
0.77
0.77
0,83
0,83
0,83
0,82
0,82
0,84
0,84
0,84
0.78
0.79
0.79
0.81
0.82
0.80
0.81
0.82
0.81
0.81
0.82
0.82
0.82
0.84
0.84
0.84
0.84
0,87
0,87
0,87
0,87
0,87
0,89
0,89
0,89
0.83
0.84
0.84
0.85
0.85
0.83
0.85
0.86
0.85
0.85
0.86
0.86
0.86
0.87
0.87
0.87
0.86
0,89
0,89
0,89
0,89
0,89
0,9
0,9
0,9
17.0
20.6
24.3
28.3
32.6
36.6
40.0
46.9
55.4
63.2
69.9
79.3
85.5
94.1
104
115
132
152,3
171,1
190
208,7
227,5
263,3
278
300,2
1250
1590
1920
2240
2550
2630
4240
4200
5590
6390
7220
8020
8850
7880
8520
9460
10800
15227,2
17113,75
19000,29
34959,86
38070,33
30915,84
32370,1
34750,27
VI Pólos - 1200 RPM - 60HZ
200 150 5009/10/11T
250 185 5009/10/11T
300 220 5009/10/11T
350 260 5009/10/11T
400 300 5810/11/12T
450 330 5810/11/12T
500 370 5810/11/12T
600 440
6806/7/8T
700 515
6806/7/8T
800 590 6809/10/11T
900 660 6809/10/11T
1000 750 6809/10/11T
1100 800
7006/10
1250 900
7006/10
1350 1000
7006/10
1750 1300
8006
2000 1500
8008
2250 1700
8806
2500 1800
8806
2750 2000
8808
3000 2250
9609
875
1094
1313
1532
1741
1959
2177
2612
3048
3483
3918
4354
4777
5428
5858
7590,40955
8674,75377
9750,93138
10834,3682
11917,805
13001,2418
G
G
G
G
G
G
G
G
G
G
G
H
F
F
G
H
H
F
F
F
G
5.6
5.7
5.8
5.8
5.9
5.9
5.9
6.2
6.2
6.2
6.2
6.8
6.1
6.1
6.4
6,9
6,9
5,7
5,8
5,8
6,4
1.2
1.2
1.3
1.3
1.2
1.2
1.2
1.2
1.2
1.2
1.2
1.4
0.7
0.7
0.7
1
1
0,7
0,7
0,7
0,9
2.1
2.1
2.1
2.2
2.1
2.1
2.1
2.3
2.4
2.4
2.4
2.4
2.3
2.3
2.4
2,3
2,3
2
2
2
2,1
109
125
161
174
328
355
409
432
503
574
646
731
897
1010
1060
1957,3
2192,18
2616,18
2943,21
3270,23
6148,21
20
20
20
15
15
15
15
20
20
20
20
15
19
19
19
18
18
28
28
28
19
44
44
44
33
33
33
33
44
44
44
44
33
42
42
42
40
40
62
62
62
42
3671
3859
4267
4498
5887
6042
6395
7497
7938
9548
10011
10562
11962
12624
12954
15390
16390
18600
19725
20855
28020
77.0
77.0
77.0
77.0
81.0
81.0
81.0
81.0
81.0
81.0
81.0
81.0
88.0
88.0
88.0
88
88
90
90
90
90
1184
1184
1184
1184
1190
1190
1190
1190
1190
1190
1190
1190
1193
1193
1194
1194
1194
1195
1195
1195
1195
92.7
93.1
93.4
93.5
94.3
94.3
94.7
94.8
94.9
95.2
95.4
95.5
95.8
96.0
96.0
95,9
96,1
96,5
96,7
96,9
96,7
93.0
93.5
93.8
94.0
94.7
94.9
95.0
95.3
95.4
95.6
95.8
95.9
96.3
96.4
96.5
96,3
96,5
96,7
96,9
97,1
97
93.0
93.5
93.8
93.9
94.7
94.9
95.0
95.4
95.5
95.7
95.9
96.0
96.3
96.4
96.5
96,1
96,3
96,6
96,8
97
97
0.64
0.64
0.64
0.64
0.64
0.64
0.64
0.71
0.71
0.71
0.71
0.69
0.77
0.78
0.77
0,73
0,73
0,8
0,8
0,8
0,77
0.75
0.75
0.75
0.75
0.75
0.75
0.75
0.80
0.80
0.80
0.80
0.79
0.83
0.84
0.83
0,81
0,81
0,85
0,85
0,85
0,84
0.80
0.80
0.80
0.80
0.81
0.81
0.81
0.84
0.84
0.84
0.84
0.83
0.86
0.86
0.85
0,84
0,84
0,87
0,87
0,87
0,86
17.6
21.6
25.6
30.3
34.2
37.6
42.1
48.0
56.2
64.2
71.7
82.3
84.5
95.0
107
141,5
161,3
174,7
193,7
212,7
234,7
3470
4350
5450
4950
4990
5620
6230
11200
13600
15500
17500
15600
15000
17100
19400
25743,54
29465,92
37531,96
41665,84
45799,73
37034,83
VIII Pólos - 900 RPM - 60HZ
200 150
5807/8/9T
1163
250 185 5810/11/12T
1454
300 220 5810/11/12T
1744
350 260 5810/11/12T
2035
400 300 5810/11/12T
2326
450 330
6806/7/8T
2622
500 370
6806/7/8T
2911
600 440 6809/10/11T
3493
700 515 6809/10/11T
4066
800 590 6809/10/11T*
4647
900 660
7006/10
5210
1000 750
7006/10
5789
1100 800
7006/10
6368
1250 900
8006
7233
1350 1000
8009
7811,64
1500 1100
8806
8669,91295
1750 1300
8806
10114,8984
2000 1500
8808
11559,8839
2250 1700
9606
13019,4
2500 1800
9606
14466
2750 2000
9609
15912,6
G
G
G
G
G
F
F
F
G
G
F
F
F
G
G
G
G
G
G
G
G
5.6
5.6
5.7
5.6
5.6
5.7
5.7
5.7
6.3
6.3
5.5
5.5
5.9
5,9
5,9
5,9
5,9
5,9
6,2
6,2
6,2
1.2
1.2
1.2
1.2
1.2
1.1
1.1
1.1
1.1
1.1
0.7
0.7
0.7
0,7
0,7
0,9
0,9
0,9
1
1
1
2.2
2.2
2.2
2.2
2.2
2.3
2.3
2.3
2.3
2.3
2.2
2.2
2.2
1,9
1,9
1,9
1,9
1,9
1,8
1,8
1,8
243
291
362
389
416
777
832
941
1050
1130
1380
1550
1550
2657,03
2952,25
4962,8
5538,84
6203,5
8094,97
9106,84
10118,7
20
20
20
20
20
19
19
19
19
19
27
27
23
36
36
24
24
24
23
23
23
44
44
44
44
44
42
42
42
42
42
59
59
51
79
79
53
53
53
51
51
51
0
4631
5601
6042
6218
6395
7938
8159
9790
10231
10562
12624
13413
13417
16010
17005
18740
19800
21025
25980
27490
28995
79.0
79.0
79.0
79.0
79.0
79.0
79.0
79.0
79.0
79.0
82.0
82.0
82.0
85
85
85
85
85
85
85
85
891
891
891
891
891
889
890
890
892
892
895
895
895
895
895
896
896
896
895
895
895
92.9
93.3
93.5
94.0
94.1
94.3
94.5
94.7
94.9
95.1
95.1
95.2
95.3
95,4
95,6
95
95,2
95,4
96
96,2
96,4
93.4
93.9
94.1
94.3
94.4
94.8
95.0
95.2
95.4
95.6
95.9
96.0
96.1
95,8
96
95,7
95,9
96,1
96,3
96,5
96,7
93.5
94.0
94.2
94.4
94.5
94.8
95.0
95.2
95.4
95.6
96.0
96.1
96.2
95,6
95,8
95,6
95,8
96
96,2
96,4
96,6
0.62
0.62
0.62
0.62
0.60
0.70
0.70
0.70
0.68
0.68
0.68
0.68
0.68
0,69
0,69
0,71
0,71
0,71
0,78
0,78
0,78
0.73
0.73
0.73
0.73
0.71
0.79
0.79
0.80
0.78
0.78
0.78
0.78
0.78
0,78
0,78
0,79
0,79
0,79
0,83
0,83
0,83
0.78
0.78
0.78
0.78
0.76
0.82
0.82
0.82
0.81
0.81
0.82
0.82
0.82
0,81
0,81
0,81
0,81
0,81
0,84
0,84
0,84
18.0
22.1
26.2
30.9
36.5
37.1
41.5
49.3
58.3
66.7
73.3
83.3
88.7
105,3
113,5
126,4
147,2
167,8
181,7
201,5
221,2
6370
7970
9550
11200
12800
13400
14900
17900
20900
23900
29700
33000
30800
45249,63
48786,94
38413,76
45067,15
51631,91
54398,27
60330,1
66261,93
High-Output Design
600 440 5810/11/12T
800 590
7006/10
H
F
6.5
5.5
1.3
0.7
2.3
2.2
436
1230
12
27
26
59
6571
11962
81.0
82.0
1190 94.5 95.1 95.1 0.61 0.72 0.79
895 95.0 95.7 95.8 0.67 0.77 0.81
51.2
66.5
6810
NOTA
1) Para carga com torque parabólico
2612
4631
Dados elétricos - Mercado EUROPA 50Hz - Tensões 415V- 4160V- 6600V
Output
Frame
kW
HP
Full Load
Torque
(kgfm)
Locked
Rotor
Current
Il/In
Locked
Rotor
Torque
Tl/Tn
Break-down
Inercia J
Torque
(kgm2)
Tb/Tn
Allowable
locked rotor
Weight
time (s)
(kg)
Hot Cold
Sound
dB(A)
415 V
% of full load
Efficiency
Power Factor
Rated
speed
(rpm)
50
75
100
50
75
Maximum
Full load
Load
current
Inercia
100 In (A) (kgm2) (1)
II Pólos - 3000 RPM - 50HZ
200 270 315C/D/E
250 340 315C/D/E
280 380 315C/D/E
315 430 315C/D/E
355 480 355C/D/E
400 550 355C/D/E
450 610 355C/D/E
500 680 355C/D/E
560 750 400L/A/B
630 850 400L/A/B
65.4
81.8
91.6
103
116
131
147
163
183
206
6.7
6.7
6.8
7.5
6.5
6.8
7.0
7.0
7.1
7.5
1
1.1
1.1
1.2
1
1
1
1.1
1.3
1.3
2.4
2.4
2.4
2.5
2.4
2.4
2.4
2.4
2.5
2.5
3.21
4.01
4.01
4.50
5.74
6.44
7.12
7.93
11.0
12.9
24
20
16
14
45
45
33
35
26
26
53
44
35
31
99
99
73
77
57
57
1640
1850
1850
1900
2590
2650
2900
2820
3500
3600
75
75
75
75
82
82
82
82
85
85
2980
2978
2977
2979
2976
2977
2978
2980
2980
2980
95.0
95.5
95.6
95.7
95.8
96.0
96.0
96.1
95.8
96.0
95.8
96.0
96.0
96.2
96.3
96.3
96.5
96.6
96.5
96.6
95.9
96.0
96.0
96.3
96.4
96.5
96.6
96.7
96.6
96.7
0.81
0.86
0.85
0.85
0.85
0.85
0.85
0.85
0.84
0.85
0.87
0.90
0.90
0.90
0.90
0.90
0.90
0.90
0.89
0.90
0.89
0.90
0.90
0.90
0.91
0.91
0.91
0.91
0.90
0.91
326
398
446
506
563
633
712
790
896
983
37
40
36
38
130
146
119
147
134
150
IV Pólos - 1500 RPM - 50HZ
250 340 315C/D/E
280 380 315C/D/E
315 430 315C/D/E
355 480 315C/D/E
400 550 315C/D/E
450 610 355C/D/E
500 680 355C/D/E
560 750 400L/A/B
630 850 400C/D/E
710 970 400C/D/E
800 1100
450
900 1250
450
1000 1350
450
164
184
207
233
263
294
327
367
412
465
522
588
653
7.0
7.0
7.0
7.0
7.0
6.5
6.5
7.0
7.0
7.7
7.0
7.0
7.0
1.3
1.4
1.5
1.5
1.6
1.4
1.5
1.4
1.4
1.4
0.7
0.7
0.7
2.5
2.6
2.7
2.7
2.7
2.3
2.4
2.2
2.3
2.4
2.5
2.5
2.5
5.75
6.32
7.01
7.58
8.50
13.8
15.3
17.6
20.0
22.4
22.0
25.0
28.0
17
19
16
15
15
30
26
20
18
13
20
20
20
37
42
35
33
33
66
57
44
40
29
44
44
44
1850
1900
2000
2050
2100
2900
3000
3700
4500
4650
5123
5420
5720
75
75
75
75
75
79
79
79
79
79
88
88
88
1485
1485
1485
1485
1484
1489
1488
1488
1489
1487
1492
1492
1492
95.0
95.3
95.3
95.5
95.7
96.0
96.2
96.3
96.5
96.5
95.8
95.9
96.0
95.6
95.8
95.9
96.0
96.1
96.4
96.5
96.6
96.8
97.0
96.6
96.6
96.8
95.8
95.9
96.0
96.1
96.1
96.6
96.7
96.8
97.0
97.0
96.8
96.9
97.0
0.76
0.76
0.75
0.75
0.75
0.79
0.77
0.76
0.76
0.78
0.76
0.76
0.76
0.83
0.83
0.82
0.82
0.83
0.85
0.85
0.82
0.82
0.84
0.84
0.84
0.84
0.86
0.86
0.85
0.86
0.86
0.87
0.87
0.86
0.86
0.86
0.87
0.87
0.87
422
472
537
598
674
745
827
936
1050
1190
1320
1480
1650
164
223
225
237
277
504
523
396
415
346
471
530
588
VI Pólos - 1000 RPM - 50HZ
160 220 315C/D/E
185 250 315C/D/E
200 270 315C/D/E
250 340 315C/D/E
280 380 355L/A/B
315 430 355L/A/B
355 480 355C/D/E
400 550 355C/D/E
450 610 400L/A/B
500 680 400L/A/B
560 750 400C/D/E
630 850
450
710 970
450
800 1100
450
900 1250
450*
158
183
198
247
276
310
350
394
442
491
550
618
696
784
882
6.1
6.1
6.1
6.1
6.0
6.0
6.0
6.0
6.2
6.5
6.0
6.5
6.5
6.5
6.7
1.3
1.4
1.4
1.5
1.3
1.3
1.3
1.5
1.3
1.3
1.4
0.8
0.8
0.8
0.8
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.3
2.3
2.3
2.4
2.4
2.4
2.4
7.46
8.76
9.51
11.4
13.1
14.3
16.0
17.6
22.0
24.8
27.9
33.0
37.4
41.9
44.2
20
16
17
14
28
26
27
24
20
16
16
20
20
20
20
44
35
37
31
62
57
59
53
44
35
35
44
44
44
44
1720
1820
1860
1960
2310
2400
2820
2980
3600
3800
4440
5100
5420
5720
5870
73
73
73
73
77
77
77
77
77
77
77
85
85
85
85
986
986
985
985
989
989
988
988
992
992
992
993
993
994
994
94.4
94.5
94.8
95.0
95.0
95.3
95.7
95.9
96.1
96.3
96.4
96.5
96.5
96.6
96.6
94.6
94.8
95.0
95.4
95.7
96.0
96.0
96.3
96.5
96.7
96.8
96.6
96.6
96.7
96.8
94.7
94.9
94.9
95.3
95.8
95.9
96.0
96.3
96.5
96.7
96.8
96.6
96.6
96.7
96.8
0.73
0.73
0.77
0.77
0.73
0.73
0.75
0.75
0.73
0.73
0.71
0.77
0.77
0.77
0.77
0.82
0.82
0.85
0.85
0.82
0.82
0.83
0.83
0.81
0.82
0.81
0.84
0.84
0.84
0.84
0.86
0.86
0.87
0.87
0.85
0.85
0.86
0.86
0.85
0.85
0.85
0.87
0.87
0.87
0.87
274
315
337
419
478
538
599
672
763
846
947
1040
1180
1320
1480
283
270
312
331
695
725
851
916
726
640
746
844
951
1070
1210
VIII Pólos - 750 RPM - 50HZ
160 220 315C/D/E
185 250 315C/D/E
200 270 315C/D/E
250 340 355L/A/B
280 380 355C/D/E
315 430 355C/D/E
355 480 400L/A/B
400 550 400L/A/B
450 610 400L/A/B
500 680 400C/D/E
560 750
450
630 850
450
211
244
264
328
368
413
465
524
590
655
732
825
5.7
5.7
5.7
5.5
5.5
5.5
6.8
6.8
6.8
6.8
5.9
6.1
1.2
1.2
1.2
1.2
1.2
1.2
1.2
1.2
1.2
1.2
0.8
0.8
2.3
2.4
2.5
2.4
2.3
2.4
2.5
2.5
2.5
2.5
2.2
2.2
10.1
11.9
12.9
17.6
20.1
22.3
28.1
32.8
37.3
44.3
60.2
64.6
22
25
19
21
22
19
22
22
20
22
26
26
48
55
42
46
48
42
48
48
44
48
57
57
1850
2000
2100
2450
2820
2980
3390
3600
3800
4640
5875
6080
71
71
71
75
75
75
75
75
75
75
80
80
738
738
739
742
742
742
743
743
743
743
745
744
94.3
94.6
94.7
95.0
95.3
95.4
94.8
94.9
95.0
95.2
95.8
96.0
94.9
95.1
95.2
95.7
95.8
95.8
95.4
95.6
95.7
95.9
96.2
96.4
94.9
95.1
95.2
95.7
95.7
95.8
95.7
95.9
96.0
96.2
96.3
96.5
0.68
0.70
0.68
0.67
0.70
0.68
0.66
0.66
0.66
0.66
0.71
0.74
0.78
0.79
0.78
0.76
0.78
0.77
0.77
0.77
0.77
0.77
0.80
0.82
0.82
0.82
0.82
0.82
0.82
0.82
0.81
0.81
0.81
0.81
0.84
0.86
286
330
357
443
496
558
637
716
805
893
964
1060
497
682
579
762
858
866
1170
1320
1350
1650
1570
1770
X Pólos - 600 RPM - 50HZ
75
100 315L/A/B
90
125 315L/A/B
110 150 315C/D/E
132 175 315C/D/E
160 220 355L/A/B
185 250 355C/D/E
200 270 355C/D/E
220 300 355C/D/E
250 340 400L/A/B
280 380 400L/A/B
315 430 400L/A/B
355 480 400L/A/B
400 550 400L/A/B
450 610
450
500 680
450
560 750
450
124
149
182
218
264
305
330
363
411
460
517
583
657
737
818
917
5.5
5.5
5.5
5.8
5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.5
6.2
6.2
6.2
1.5
1.5
1.5
1.6
1.2
1.2
1.2
1.2
1
1
1
1
1
0.8
0.8
0.8
2.0
2
2
2
2
2
2
2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
6.90
8.39
10.1
12.9
17.0
20.1
21.7
24.8
26.5
31.1
33.5
38.1
40.4
67.0
75.0
80.0
15
15
15
15
20
20
20
20
22
22
22
22
22
25
25
25
33
33
33
33
44
44
44
44
48
48
48
48
48
55
55
55
1580
1700
1900
2100
2350
2750
2820
2980
3400
3545
3725
3930
4100
4770
5020
5305
78
78
78
78
80
80
80
80
80
80
80
80
80
80
80
80
590
590
590
590
591
591
591
591
593
593
593
593
593
595
595
595
91.6
91.8
92.2
92.6
92.8
93.0
93.2
93.4
94.8
95.0
95.2
95.4
95.6
95.4
95.6
95.8
92.5
92.8
93.0
93.2
93.8
94.0
94.2
94.4
95.4
95.6
95.8
96.0
96.2
95.8
96.0
96.2
92.5
92.8
93.0
93.2
94.0
94.2
94.4
94.6
95.4
95.6
95.8
96.0
96.2
95.8
96.0
96.2
0.51
0.51
0.51
0.51
0.50
0.50
0.50
0.50
0.60
0.60
0.60
0.60
0.60
0.60
0.60
0.61
0.63
0.63
0.63
0.63
0.62
0.62
0.62
0.62
0.72
0.72
0.72
0.72
0.72
0.72
0.72
0.73
0.70
0.70
0.70
0.70
0.69
0.69
0.69
0.69
0.78
0.78
0.78
0.78
0.78
0.79
0.79
0.80
161
193
235
281
343
396
427
468
467
522
586
659
741
827
918
1010
247
296
362
452
612
707
764
840
1050
1170
1320
1490
1680
1900
2120
2370
Output
Frame
kW
HP
Full Load
Torque
(kgfm)
Locked
Rotor
Current
Il/In
Locked
Rotor
Torque
Tl/Tn
Break-down
Inercia J
Torque
(kgm2)
Tb/Tn
Allowable
locked rotor
Weight
time (s)
(kg)
Hot Cold
Sound
dB(A)
415 V
% of full load
Efficiency
Power Factor
Rated
speed
(rpm)
50
75
100
50
75
Maximum
Full load
Load
Inercia
current
100 In (A) (kgm2) (1)
XII Pólos - 600 RPM - 50HZ
132 175 355L/A/B
160 220 355C/D/E
200 270 400L/A/B
250 340 400L/A/B
280 380 400C/D/E
315 430
450
355 480
450
400 550
450
450 610
450
500 680
450
261
316
395
492
551
620
699
787
885
984
4.3
4.3
5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.5
1.3
1.2
1
1.2
1.2
0.8
0.8
0.8
0.8
0.8
2
1.8
2.1
2.3
2.3
1.9
1.9
1.9
1.9
1.9
18.5
24.6
32.8
38.6
41.0
59.1
67.6
72.0
76.2
80.5
20
20
20
20
20
40
40
40
40
40
44
44
44
44
44
88
88
88
88
88
2460
3100
3400
3690
4230
4555
4790
5050
5310
5620
80
80
80
80
80
80
80
80
80
80
493
493
493
495
495
495
495
495
495
495
93.3
93.5
94.0
94.8
94.8
94.9
95.1
95.3
95.5
95.7
94.0
94.0
94.5
95.0
95.0
95.1
95.3
95.5
95.7
95.9
94.0
94.0
94.5
95.0
95.0
95.1
95.3
95.5
95.7
95.9
0.48
0.48
0.54
0.57
0.57
0.61
0.61
0.61
0.62
0.62
0.60
0.60
0.67
0.69
0.69
0.71
0.71
0.71
0.72
0.72
0.67
0.67
0.74
0.75
0.75
0.77
0.77
0.77
0.78
0.78
292
354
398
488
547
599
673
757
839
930
762
792
1040
1560
1750
2620
2960
3340
3760
4180
High-Output Design
160 220 315C/D/E
160 220 355L/A/B
250 340 355C/D/E
315 430 355C/D/E
264
316
412
310
5.8
4.3
5.5
6.0
1.6
1.3
1.2
1.3
2.0
2
2
2.5
13.8
21.1
26.4
14.3
15
20
20
26
33
44
44
57
2150
2520
3050
2690
78
80
80
77
590
493
591
989
92.4
93.3
93.4
95.3
93.0
94.0
94.4
96.0
93.0
94.0
94.6
95.9
0.51
0.48
0.50
0.73
0.63
0.60
0.62
0.82
0.70
0.67
0.69
0.85
342
354
533
538
550
926
956
725
Locked
Rotor
Current
Il/In
Locked
Rotor
Torque
Tl/Tn
Sound
dB(A)
Rated
speed
(rpm)
50
75
100
50
75
65.5
72.1
81.9
91.7
103
116
131
147
163
183
206
232
261
293
326
358
6.0
6.2
6.2
6.5
6.3
6.3
6.5
6.6
6.6
6.6
6.6
6.6
6.5
7.0
7.2
8.8
1
1
1
1
1
1
1
1.3
1.3
1.3
1.3
1.3
0.7
0.8
0.8
1
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.5
2.5
2.5
2.5
2.5
2.2
2.5
2.5
3
3.40
3.60
3.80
4.00
5.50
5.80
6.90
9.40
10.2
11.0
13.0
14.4
23.7
25.1
26.6
26.6
20
20
15
15
20
20
20
20
20
20
20
20
22
22
22
18
44
44
33
33
44
44
44
44
44
44
44
44
48
48
48
40
1670
1710
1750
1790
2480
2550
2740
3290
3390
3500
4210
4340
5275
5425
5575
5575
75
75
75
75
82
82
82
85
85
85
85
85
88
88
88
88
2973
2974
2974
2975
2975
2975
2975
2979
2980
2980
2980
2980
2986
2987
2988
2990
94.0
94.2
94.4
94.6
94.2
94.5
94.7
94.7
94.9
95.4
95.6
95.8
95.4
95.6
95.8
95.9
94.6
94.8
95.0
95.1
94.9
95.0
95.2
95.3
95.6
95.9
96.1
96.3
96.1
96.3
96.5
96.6
94.6
94.8
95.0
95.1
95.0
95.1
95.3
95.3
95.6
95.9
96.1
96.3
96.3
96.5
96.7
96.8
0.83
0.83
0.83
0.83
0.83
0.83
0.83
0.79
0.79
0.81
0.83
0.83
0.86
0.86
0.86
0.82
0.88
0.88
0.88
0.88
0.88
0.88
0.88
0.85
0.85
0.87
0.87
0.87
0.89
0.89
0.89
0.88
0.89
0.89
0.89
0.89
0.89
0.89
0.89
0.88
0.88
0.89
0.89
0.89
0.90
0.90
0.90
0.89
33.0
36.2
41.0
45.9
51.7
58.2
65.4
74.5
82.5
91.2
102
115
128
144
159
177
28
31
25
29
43
49
55
80
89
100
112
127
92
134
151
184
IV Pólos - 1500 RPM - 50HZ
160 220 315L/A/B
105
185 250 315L/A/B
121
200 270 315C/D/E
131
220 300 315C/D/E
144
250 340 315C/D/E
164
280 380 315C/D/E
184
315 430 315C/D/E
207
355 480 355C/D/E
233
400 550 355C/D/E
262
450 610 355C/D/E
295
500 680 400L/A/B
327
560 750 400L/A/B
366
630 850 400L/A/B
412
710 970 400C/D/E
464
800 1100 400C/D/E*
523
900 1250
450
588
1000 1350
450
653
1100 1500
450
719
1250 1700
450
817
1400 1900
500L
913
1600 2200
500L
1043
1800 2500
500C
1173
2000 2700
560L
1303
2250 3000
560B
1466
2500 3400
630L
1629
2800 3800
630L
1824
3150 4300
630C
2052
6.0
6.0
6.0
6.0
6.0
6.2
6.8
6.0
6.0
6.2
6.4
6.4
6.5
6.9
6.9
6.5
6.5
6.5
6.9
6,9
6,9
6,9
6,7
6,7
6,7
6,7
6,7
1.5
1.5
1.5
1.5
1.5
1.6
1.7
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
0.9
0.9
0.9
0.9
0,9
0,9
0,9
0,7
0,7
0,7
0,7
0,7
2.4
2.4
2.5
2.4
2.5
2.5
2.7
2.3
2.3
2.4
2.5
2.5
2.5
2.7
2.7
2.5
2.5
2.5
2.5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
3.61
3.95
4.40
5.10
5.70
6.60
7.20
10.7
11.6
13.4
18.1
19.6
22.5
26.9
28.4
23.5
26.4
27.9
29.4
40,91
46,03
51,14
89,33
99,26
200,4
225,45
254,08
20
20
20
20
20
20
18
20
20
20
20
20
20
20
16
20
20
20
20
18
18
18
26
26
27
27
27
44
44
44
44
44
44
40
44
44
44
44
44
44
44
35
44
44
44
44
39,6
39,6
39,6
57,2
57,2
59,4
59,4
59,4
1500
1550
1650
1750
1840
1930
2040
2610
2680
2900
3390
3500
3700
4440
4540
5275
5575
5725
5875
6705
7145
7585
9915
10535
12265
13010
13860
75
75
75
75
75
75
75
79
79
79
79
79
79
79
79
88
88
88
88
90
90
90
90
90
90
90
90
1484
1484
1484
1484
1484
1485
1485
1487
1487
1487
1490
1490
1490
1490
1490
1491
1491
1491
1491
1494
1494
1494
1495
1495
1495
1495
1495
93.6
93.8
94.1
94.2
94.5
94.6
94.7
94.5
95.1
95.2
95.6
95.7
95.8
96.0
96.0
96.0
96.1
96.2
96.3
96,4
96,5
96,6
96,1
96,2
96,1
96,2
96,3
94.1
94.3
94.6
94.7
95.1
95.3
95.4
95.5
95.8
95.9
96.3
96.2
96.3
96.4
96.4
96.6
96.7
96.8
96.9
97
97,1
97,2
96,8
96,9
96,8
96,9
97
94.4
94.6
94.8
94.9
95.1
95.3
95.5
95.6
95.9
96.0
96.3
96.4
96.5
96.6
96.4
96.7
96.8
96.9
97.0
97,1
97,2
97,3
97,1
97,2
97
97,1
97,2
0.73
0.74
0.75
0.75
0.75
0.75
0.74
0.75
0.75
0.75
0.73
0.73
0.73
0.73
0.72
0.77
0.77
0.77
0.76
0,8
0,8
0,8
0,81
0,81
0,84
0,84
0,84
0.82
0.83
0.83
0.83
0.83
0.83
0.82
0.83
0.83
0.83
0.82
0.82
0.82
0.82
0.81
0.85
0.85
0.84
0.84
0,86
0,86
0,86
0,87
0,87
0,89
0,89
0,89
0.85
0.85
0.86
0.85
0.86
0.86
0.86
0.86
0.86
0.86
0.85
0.85
0.85
0.85
0.85
0.88
0.88
0.87
0.87
0,89
0,89
0,89
0,89
0,89
0,9
0,9
0,9
27.7
32.0
34.0
37.8
42.4
47.4
53.2
59.9
67.3
75.7
84.9
95.2
106
120
136
147
163
181
205
224,8
256,7
288,5
321,2
361
397,4
444,7
499,7
130
150
168
178
210
243
271
273
308
359
409
459
516
622
557
585
650
716
816
849
970
1091
1596
1796
2072
2321
2611
NOTA
1) Para carga com torque parabólico
Output
Frame
kW
HP
Full Load
Torque
(kgfm)
II Pólos - 3000 RPM - 50HZ
200 270 315C/D/E
220 300 315C/D/E
250 340 315C/D/E
280 380 315C/D/E
315 430 355C/D/E
355 480 355C/D/E
400 550 355C/D/E
450 610 400L/A/B
500 680 400L/A/B*
560 750 400L/A/B
630 850 400C/D/E
710 970 400C/D/E
800 1100
450
900 1250
450
1000 1350
450
1100 1500
450*
Break-down
Inercia J
Torque
(kgm2)
Tb/Tn
Allowable
locked rotor
Weight
time (s)
(kg)
Hot Cold
4160 V
% of full load
Efficiency
Power Factor
Maximum
Full load
Load
current
Inercia
100 In (A) (kgm2) (1)
Allowable
locked rotor
Weight
time (s)
(kg)
Hot Cold
Locked
Rotor
Current
Il/In
Locked
Rotor
Torque
Tl/Tn
VI Pólos - 1000 RPM - 50HZ
132 180 315C/D/E
131
160 220 315C/D/E
159
185 250 315C/D/E
183
200 270 315C/D/E
198
220 300 315C/D/E
218
250 340 315C/D/E
247
280 380 355L/A/B
276
315 430 355C/D/E
310
355 480 355C/D/E
350
400 550 355C/D/E
394
450 610 400L/A/B
443
500 680 400L/A/B
492
560 750 400C/D/E
551
630 850 400C/D/E
620
710 970
450
697
800 1100
450
785
900 1250
450
883
1000 1350
450
981
1250 1700
500L
1222
1400 1900
500B
1369
1600 2200
560L
1566
1800 2500
560L
1762
2000 2700
560B
1958
2250 3000
630C
2203
6.0
6.0
6.2
6.2
6.2
6.8
5.5
5.5
5.5
5.5
6.5
6.5
6.5
6.5
5.9
6.1
6.5
6.5
6,2
6,2
5,6
5,6
5,6
5,6
1.5
1.5
1.5
1.5
1.5
1.8
1.2
1.2
1.2
1.2
1.5
1.5
1.5
1.5
0.8
0.8
0.9
0.9
1,2
1,2
0,8
0,8
0,8
0,9
2.3
2.3
2.3
2.3
2.3
2.6
2.3
2.3
2.3
2.3
2.6
2.6
2.6
2.6
2.3
2.3
2.4
2.4
2,5
2,5
2,3
2,3
2,3
2,2
7.30
9.40
10.8
11.7
12.6
13.5
13.8
16.1
17.3
19.5
20.0
21.4
25.9
28.9
33.3
37.8
42.4
44.6
86,08
98,38
118,12
131,24
147,65
259,09
12
12
12
12
12
8
18
18
18
18
20
20
20
20
23
23
23
23
19
19
30
30
30
17
26
1570
26
1860
26
1970
26
2040
26
2110
18
2180
40
2450
40
2920
40
2900
40
3050
44
3580
44
3690
44
4440
44
4640
51
5125
51
5425
51
5725
51
5725
41,8 7195
41,8 7765
66
8725
66
9210
66
9815
37,4 12715
VIII Pólos - 750 RPM - 50HZ
132 180 315C/D/E
174
160 220 315C/D/E
211
185 250 315C/D/E
244
200 270 315C/D/E
264
220 300 355L/A/B
289
250 340 355C/D/E
329
280 380 355C/D/E
368
315 430 355C/D/E
413
355 480 400L/A/B
466
400 550 400L/A/B
525
450 610 400C/D/E
591
500 680 400C/D/E
655
560 750 400C/D/E*
734
630 850
450
825
710 970
450
928
800 1100
450*
1046
900 1250
500L
1175
1000 1350
500C
1306
1120 1500
560L
1462
1250 1700
560L
1632
1400 1900
560B
1828
1600 2200
630L
2089
1800 2500
630L
2350
2000 2700
630C
2611
5.5
5.5
5.7
5.7
6.0
6.0
6.0
6.2
6.0
6.0
6.0
6.6
6.6
5.5
5.5
5.5
5,5
5,5
6,4
6,4
6,4
5,5
5,5
5,5
1.2
1.2
1.2
1.2
1.3
1.3
1.3
1.4
1.1
1.1
1.1
1.2
1.2
0.9
0.9
0.9
0,8
0,8
0,9
0,9
0,9
0,8
0,8
0,8
2.3
2.3
2.5
2.5
2.2
2.2
2.2
2.3
2.3
2.3
2.5
2.5
2.5
2.3
2.3
2.3
2
2
2,3
2,3
2,3
1,7
1,7
1,7
8.40
10.0
11.8
12.7
14.1
22.0
22.0
19.8
32.8
35.1
39.7
44.3
46.3
54.7
57.9
65.4
111,3
124,66
230,05
257,66
294,47
341,17
379,08
426,46
15
15
12
12
22
22
22
22
22
22
22
22
22
30
30
28
34
34
32
32
32
25
25
25
33
33
26
26
48
48
48
48
48
48
48
48
48
66
66
62
74,8
74,8
70,4
70,4
70,4
55
55
55
X Pólos - 600 RPM - 50HZ
110 150 355L/A/B
132 175 355L/A/B
150 200 355C/D/E
160 220 355C/D/E
185 250 355C/D/E
200 270 355C/D/E
220 300 400L/A/B
250 340 400L/A/B
280 380 400L/A/B
315 430 400L/A/B
355 480 400L/A/B
400 550
450
450 610
450
500 680
450
560 750
450
630 850
500L
710 970
500B
800 1100
560L
900 1250
560L
1000 1350
560A
1120 1500
630L
1250 1700
630A
5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.5
5,5
5,5
6
6
6
5,5
5,5
1.2
1.2
1.2
1.2
1.2
1.2
0.9
0.9
0.9
0.9
0.9
0.9
0.9
0.9
0.9
0,8
0,8
1
1
1
0,8
0,8
2.2
2.2
2.2
2.2
2.2
2.2
2
2
2
2
2
2
2
2
2
1,8
1,8
2,2
2,2
2,2
1,8
1,8
14.4
16.2
18.5
20.8
23.1
26.0
20.5
23.0
25.8
29.1
32.8
40.8
54.7
57.9
57.1
90,37
101,83
210,12
233,46
261,48
357,65
400,57
11
11
11
11
11
11
28
28
28
28
28
31
31
31
31
32
32
35
35
35
47
47
Output
Frame
kW
HP
Full Load
Torque
(kgfm)
181
218
247
264
305
330
361
411
460
517
583
656
738
820
918
1031
1162
1307
1471
1634
1830
2043
Break-down
Inercia J
Torque
(kgm2)
Tb/Tn
4160 V
% of full load
Efficiency
Power Factor
Maximum
Full load
Load
current
Inercia
100 In (A) (kgm2) (1)
Rated
speed
(rpm)
50
75
100
50
75
73
73
73
73
73
73
77
77
77
77
77
77
77
77
85
85
85
85
85
85
88
88
88
90
983
983
983
983
983
985
989
989
989
989
990
990
990
990
992
993
993
993
996
996
995
995
995
995
92.6
93.1
93.3
93.3
93.5
93.7
94.3
94.7
94.7
95.0
95.2
95.3
95.5
95.7
95.7
95.8
95.9
95.9
96,4
96,6
96,9
97,1
97,3
96,9
93.0
93.5
93.8
93.8
93.9
94.1
95.0
95.2
95.3
95.5
95.9
95.8
96.0
96.1
96.1
96.2
96.3
96.4
97
97,2
97,2
97,4
97,6
97,4
93.3
93.8
94.0
94.1
94.2
94.4
95.2
95.4
95.6
95.8
96.0
95.9
96.1
96.2
96.2
96.2
96.3
96.3
97,1
97,3
97,2
97,4
97,6
97,5
0.69
0.69
0.69
0.72
0.72
0.67
0.66
0.66
0.66
0.66
0.69
0.70
0.70
0.70
0.76
0.76
0.74
0.74
0,71
0,71
0,81
0,81
0,81
0,79
0.79
0.79
0.79
0.80
0.80
0.78
0.76
0.76
0.76
0.76
0.79
0.80
0.80
0.80
0.83
0.83
0.82
0.82
0,81
0,81
0,86
0,86
0,86
0,84
0.83
0.83
0.83
0.84
0.84
0.82
0.81
0.81
0.81
0.81
0.83
0.84
0.84
0.84
0.86
0.86
0.85
0.85
0,84
0,84
0,88
0,88
0,88
0,86
23.6
28.6
32.9
35.1
38.6
44.8
50.4
56.6
63.6
71.6
78.4
86.5
96.0
108
119
134
152
170
212,7
237,7
259,6
291,5
323,2
372,4
137
166
192
208
229
209
391
439
495
558
882
980
1100
1230
1050
1180
1470
1630
2036
2280
3167
3563
3959
2524
1780
1900
2040
2110
2440
2830
2900
3050
3605
3785
4440
4640
4790
5573
5725
6100
7260
7745
8955
9510
10245
11840
12455
13220
71
71
71
71
75
75
75
75
75
75
75
75
75
80
80
80
82
82
82
82
82
82
82
82
739
739
739
739
741
741
741
742
742
742
742
743
743
744
745
745
746
746
746
746
746
746
746
746
92.3
92.5
92.7
92.9
94.2
94.4
94.5
94.6
94.8
94.8
94.9
94.9
95.1
95.6
95.6
95.8
95,9
96,1
96,1
96,3
96,5
96,1
96,3
96,5
93.1
93.5
93.5
93.5
94.8
95.0
95.1
95.2
95.3
95.5
95.6
95.4
95.6
96.1
96.1
96.2
96,4
96,6
96,6
96,8
97
96,7
96,9
97,1
93.3
93.6
93.7
93.7
94.5
94.7
94.9
95.1
95.4
95.6
95.7
95.7
95.7
96.1
96.1
96.2
96,5
96,7
96,7
96,9
97,1
96,7
96,9
97,1
0.57
0.57
0.57
0.59
0.62
0.62
0.62
0.60
0.70
0.70
0.69
0.66
0.66
0.69
0.69
0.69
0,72
0,72
0,8
0,8
0,8
0,79
0,79
0,79
0.69
0.69
0.69
0.71
0.72
0.72
0.72
0.71
0.80
0.80
0.79
0.76
0.77
0.79
0.79
0.79
0,81
0,81
0,85
0,85
0,85
0,83
0,83
0,83
0.76
0.76
0.76
0.77
0.78
0.78
0.78
0.77
0.82
0.82
0.82
0.81
0.81
0.83
0.83
0.83
0,83
0,83
0,87
0,87
0,87
0,85
0,85
0,85
25.9
31.3
36.1
38.5
41.4
47.0
52.5
59.7
63.0
70.8
79.3
89.6
100
109
124
139
155,9
172,9
184,8
205,8
230
270,2
303,3
336,3
276
335
334
361
678
764
858
1050
1030
1170
1430
1650
1850
2290
2580
2700
3050
3389
4419
4932
5524
3279
3689
4099
24
2300
24
2400
24
2535
24
2670
24
2805
24
2975
62
2935
62
3065
62
3215
62
3385
62
3580
68
4715
68
5500
68
5725
68
5520
70,4 6020
70,4 6380
77
8390
77
8840
77
9380
103 11420
103 12035
80
80
80
80
80
80
80
80
80
80
80
80
80
80
80
82
82
82
82
82
82
82
591
591
591
591
591
591
593
593
593
593
593
594
594
594
594
595
595
596
596
596
596
596
90.9
91.1
91.3
91.5
91.7
91.9
93.9
94.1
94.3
94.5
94.7
95.0
95.2
95.4
95.6
96,1
96,3
95,7
95,9
96,1
96,1
96,3
92.2
92.4
92.6
92.8
93.0
93.2
94.4
94.6
94.8
95.0
95.2
95.4
95.6
95.8
96.0
96,3
96,5
96,3
96,5
96,7
96,5
96,7
92.5
92.7
92.9
93.1
93.3
93.5
94.4
94.6
94.8
95.0
95.2
95.4
95.6
95.8
96.0
96,1
96,3
96,4
96,6
96,8
96,5
96,7
0.43
0.43
0.43
0.44
0.44
0.44
0.58
0.58
0.59
0.59
0.60
0.66
0.66
0.66
0.66
0,77
0,77
0,71
0,71
0,71
0,8
0,8
0.55
0.55
0.55
0.56
0.56
0.56
0.69
0.69
0.70
0.70
0.71
0.76
0.76
0.76
0.76
0,83
0,83
0,81
0,81
0,81
0,85
0,85
0.63
0.63
0.63
0.64
0.64
0.64
0.74
0.74
0.75
0.75
0.76
0.80
0.80
0.80
0.80
0,86
0,86
0,84
0,84
0,84
0,86
0,86
26.2
31.3
35.5
37.3
43.0
46.4
43.7
49.6
54.7
61.3
68.1
72.7
81.7
90.4
102
105,8
119
137,1
153,9
170,7
187,3
208,6
246
296
337
358
415
448
1010
1150
1280
1440
1630
2020
2270
2520
2830
2785
3139
5409
6085
6761
7247
8089
Sound
dB(A)
Output
Frame
kW
HP
Full Load
Torque
(kgfm)
Locked
Rotor
Current
Il/In
Locked
Rotor
Torque
Tl/Tn
Break-down
Inercia J
Torque
(kgm2)
Tb/Tn
Allowable
locked rotor
Weight
time (s)
(kg)
Hot Cold
Sound
dB(A)
4160 V
% of full load
Efficiency
Power Factor
Maximum
Full load
Load
current
Inercia
100 In (A) (kgm2) (1)
Rated
speed
(rpm)
50
75
100
50
75
80
80
80
80
80
80
80
80
80
80
82
82
82
82
82
82
82
82
82
495
495
495
495
495
495
494
494
494
494
496
496
496
496
496
496
496
496
496
91.9
92.1
92.3
92.5
92.7
92.9
94.4
94.6
94.8
95.0
94,9
95,1
95,3
94,3
94,5
94,7
96
96,2
96,4
93.1
93.3
93.5
93.7
93.9
94.1
94.9
95.1
95.3
95.5
95,4
95,6
95,8
95,3
95,5
95,7
96,3
96,5
96,7
93.3
93.5
93.7
93.9
94.1
94.3
94.9
95.1
95.3
95.5
95,3
95,5
95,7
95,5
95,7
95,9
96,3
96,5
96,7
0.51
0.51
0.51
0.51
0.51
0.51
0.48
0.48
0.48
0.48
0,67
0,67
0,67
0,65
0,65
0,65
0,76
0,76
0,76
0.64
0.64
0.64
0.64
0.64
0.64
0.60
0.60
0.60
0.60
0,76
0,76
0,76
0,75
0,75
0,75
0,83
0,83
0,83
0.71
0.71
0.71
0.71
0.71
0.71
0.67
0.67
0.67
0.67
0,8
0,8
0,8
0,8
0,8
0,8
0,85
0,85
0,85
27.7
31.3
33.4
38.5
41.6
45.6
54.6
61.0
68.5
77.0
72,8
81,7
90,6
101,7
114,2
128,4
135,6
152,3
168,8
994
1130
1200
1390
1500
1650
3140
3520
3960
4460
3235
3640
4044
5508
6197
6983
8659
9741
10824
73
75
75
75
82
79
80
88
85
983
1484
2975
1485
2975
1487
745
1491
993
92.6
94.0
94.8
94.8
94.9
95.3
95.4
95.8
95.9
93.0
94.6
95.2
95.5
95.4
96.0
96.0
96.4
96.4
93.3
94.8
95.2
95.6
95.5
96.1
96.1
96.6
96.4
0.69
0.73
0.83
0.74
0.83
0.75
0.68
0.77
0.73
0.79
0.82
0.88
0.82
0.88
0.83
0.78
0.85
0.82
0.83
0.85
0.89
0.86
0.89
0.86
0.82
0.88
0.84
23.6
34.4
51.6
59.9
73.5
84.1
98.4
131
189
137
168
32
305
63
400
2030
519
1800
Sound
dB(A)
Rated
speed
(rpm)
50
75
100
50
75
XII Pólos - 600 RPM - 50HZ
132 175 400L/A/B
150 200 400L/A/B
160 220 400L/A/B
185 250 400L/A/B
200 270 400L/A/B
220 300 400L/A/B
250 340
450
280 380
450
315 430
450
355 480
450
400 550
500L
450 610
500L
500 680
500C
560 750
560L
630 850
560L
710 970
560A
800 1100
630L
900 1250
630L
1000 1350
630C
260
295
315
364
394
433
493
552
621
700
785
884
982
1100
1237
1394
1571
1767
1964
5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.5
5,5
5,5
5,5
5,5
5,5
5,5
5,5
5,5
5,5
1.1
1.1
1.1
1.1
1.1
1.1
1
1
1
1
0,7
0,7
0,7
1,1
1,1
1,1
0,9
0,9
0,9
2.3
2.3
2.3
2.3
2.3
2.3
2
2
2
2
1,7
1,7
1,7
1,9
1,9
1,9
1,9
1,9
1,9
18.5
21.2
23.8
26.5
29.8
33.1
37.7
42.5
47.8
53.9
90,76
100,84
112,94
200,58
226,06
254,71
366,08
406,76
455,57
25
25
25
25
25
25
50
50
50
50
47
47
47
39
39
39
48
48
48
High-Output Design
132 180 315L/A/B
200 270 315L/A/B
315 430 315C/D/E*
355 480 315C/D/E*
450 610 355C/D/E*
500 680 355C/D/E*
560 750
450
800 1100
450
1100 1500
450*
131
131
103
233
147
328
732
523
1079
6.0
6.2
6.5
6.8
6.6
6.2
5.5
6.5
6.8
1.5
1.5
1
1.7
1
1.5
0.9
0.9
0.9
2.3
2.5
2.2
2.7
2.2
2.4
2.3
2.5
2.4
7.30
4.40
4.40
7.70
6.90
14.2
48.5
21.9
46.5
12
20
15
18
20
20
30
20
23
Locked
Rotor
Current
Il/In
Locked
Rotor
Torque
Tl/Tn
65.5
72.0
81.8
91.6
103
116
131
147
163
183
206
232
261
293
326
6.0
6.0
6.5
6.0
6.3
6.3
6.5
6.5
6.5
6.8
6.8
7.2
7.2
7.2
7.5
1
1
1
1
1
1
1
1.3
1.3
1.3
1.3
0.8
0.8
0.8
0.8
2.3
2.3
2.3
2.3
2.3
2.3
2.3
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
3.40
3.70
3.90
5.30
5.90
6.40
6.40
10.3
12.0
13.7
14.5
20.8
23.7
26.6
26.6
15
15
12
20
20
20
20
25
25
25
20
20
20
20
20
33
33
26
44
44
44
44
55
55
55
44
44
44
44
44
1730
1770
1810
2490
2590
2670
2670
3400
4130
4330
4440
4975
5275
5573
5573
75
75
75
82
82
82
82
85
85
85
85
88
88
88
88
2975
2975
2975
2976
2976
2976
2976
2980
2980
2981
2980
2987
2988
2988
2989
93.1
93.5
94.0
93.4
93.7
94.0
94.3
94.8
95.0
95.4
95.6
94.8
95.1
95.3
95.5
94.1
94.3
94.5
94.4
94.7
95.0
95.2
95.4
95.7
95.9
96.1
95.6
95.9
96.1
96.2
94.2
94.4
94.6
94.5
94.8
95.1
95.3
95.5
95.8
96.0
96.2
96.2
96.3
96.5
96.6
0.77
0.77
0.77
0.83
0.83
0.83
0.80
0.80
0.81
0.81
0.81
0.85
0.85
0.85
0.85
0.85
0.85
0.85
0.88
0.88
0.88
0.86
0.86
0.87
0.87
0.87
0.89
0.89
0.89
0.89
0.87
0.87
0.87
0.89
0.89
0.89
0.88
0.87
0.88
0.88
0.88
0.90
0.90
0.90
0.90
21.3
23.4
26.6
29.1
32.7
36.7
41.7
47.4
51.9
58.0
65.1
71.7
80.7
90.7
101
21
23
21
40
45
51
59
102
112
125
111
94
105
118
134
IV Pólos - 1500 RPM - 50HZ
200 270 315C/D/E
131
220 300 315C/D/E
145
250 340 315C/D/E
164
280 380 315C/D/E
184
315 430 355C/D/E
206
355 480 355C/D/E
232
400 550 355C/D/E
262
450 610 400L/A/B
294
500 680 400L/A/B
327
560 750 400L/A/B
366
630 850 400C/D/E
412
710 970 400C/D/E
464
800 1100
450
523
900 1250
450
588
1000 1350
450
653
1100 1500
450
719
1250 1700
500L
815
1400 1900
500L
913
1600 2200
500C
1044
1800 2500
560L
1173
2000 2700
560B
1303
2250 3000
630L
1466
2500 3400
630L
1629
2800 3800
630C
1824
6.2
6.2
6.2
6.3
6.2
6.2
6.3
6.4
6.4
6.5
6.5
6.8
6.6
6.6
6.6
6.6
6,1
6,1
6,1
6,9
6,9
6,7
6,7
6,7
1.6
1.6
1.6
1.6
1.5
1.5
1.6
1.5
1.5
1.5
1.5
1.5
0.9
0.9
0.9
0.9
0,7
0,7
0,7
0,6
0,6
0,7
0,7
0,7
2.3
2.3
2.3
2.3
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2,4
2,4
2,4
2,5
2,5
2,5
2,5
2,5
5.40
5.75
6.61
7.15
9.83
10.7
12.5
18.1
19.6
21.0
26.9
28.4
23.5
26.4
27.9
29.4
39,78
45,46
51,14
83,69
94,15
209,41
234,54
263,86
12
12
12
12
18
18
18
18
18
18
18
18
20
20
20
20
24
24
24
38
38
29
29
29
26
26
26
26
40
40
40
40
40
40
40
40
44
44
44
44
52,8
52,8
52,8
83,6
83,6
63,8
63,8
63,8
1770
1810
1910
1980
2595
2650
2820
3400
3500
3600
4540
4640
5275
5425
5725
5875
6595
7075
7560
9540
10190
11925
12600
13385
75
75
75
75
79
79
79
79
79
79
79
79
88
88
88
88
90
90
90
90
90
90
90
90
1485
1482
1482
1482
1488
1488
1488
1490
1490
1490
1490
1490
1491
1491
1491
1491
1493
1493
1493
1495
1495
1495
1495
1495
93.8
93.9
94.1
94.4
94.2
94.5
94.7
95.1
95.3
95.5
95.6
95.9
95.5
95.7
95.9
96.1
96,3
96,4
96,5
96
96,1
95,6
95,7
95,8
94.3
94.5
94.8
94.9
95.0
95.3
95.5
95.9
96.0
96.1
96.2
96.3
96.1
96.2
96.3
96.4
96,9
97
97,1
96,7
96,8
96,5
96,6
96,7
94.5
94.7
95.0
95.1
95.2
95.4
95.6
96.1
96.2
96.3
96.4
96.5
96.2
96.3
96.4
96.5
97
97,1
97,2
97
97,1
96,8
96,9
97
0.70
0.70
0.70
0.70
0.73
0.73
0.73
0.74
0.74
0.73
0.75
0.75
0.77
0.77
0.77
0.77
0,84
0,84
0,84
0,84
0,84
0,84
0,84
0,84
0.80
0.80
0.80
0.80
0.81
0.81
0.81
0.82
0.82
0.81
0.82
0.82
0.84
0.84
0.84
0.84
0,89
0,89
0,89
0,89
0,89
0,89
0,89
0,89
0.84
0.84
0.84
0.84
0.85
0.85
0.85
0.86
0.86
0.85
0.86
0.86
0.87
0.87
0.87
0.87
0,9
0,9
0,9
0,9
0,9
0,9
0,9
0,9
22.0
24.2
27.4
30.7
34.1
38.3
43.1
47.6
52.9
59.8
66.5
74.8
83.6
94.0
104
115
125,3
140,1
160
180,4
200,2
225,9
250,8
280,6
94
104
119
133
233
263
307
328
365
410
458
518
518
582
648
715
879
985
1125
1999
2221
2003
2226
2493
NOTA
26
44
33
40
44
44
66
44
51
1570
1570
1850
2110
2740
2980
5275
5125
6000
1) Para carga com torque parabólico
Output
Frame
kW
55
2700
55
2820
55
5940
55
3060
55
3210
55
3365
110 4580
110 4815
110 5085
110 5385
103 5530
103 5790
103 6100
85,8 7820
85,8 8260
85,8 8760
106 11450
106 12020
106 12705
HP
Full Load
Torque
(kgfm)
II Pólos - 3000 RPM - 50HZ
200 270 315C/D/E
220 300 315C/D/E
250 340 315C/D/E
280 380 355C/D/E
315 430 355C/D/E
355 480 355C/D/E
400 550 355C/D/E
450 610 400L/A/B
500 680 400C/D/E
560 750 400C/D/E
630 850 400C/D/E
710 970
450
800 1100
450
900 1250
450
1000 1350
450*
Break-down
Inercia J
Torque
(kgm2)
Tb/Tn
Allowable
locked rotor
Weight
time (s)
(kg)
Hot Cold
6600 V
% of full load
Efficiency
Power Factor
Maximum
Full load
Load
current
Inercia
100 In (A) (kgm2) (1)
Allowable
locked rotor
Weight
time (s)
(kg)
Hot Cold
Locked
Rotor
Current
Il/In
Locked
Rotor
Torque
Tl/Tn
VI Pólos - 1000 RPM - 50HZ
132 180 315C/D/E
131
160 220 315C/D/E
158
185 250 315C/D/E
183
200 270 315C/D/E
198
220 300 315C/D/E
218
250 340 355C/D/E
246
280 380 355C/D/E
275
315 430 355C/D/E
310
355 480 355C/D/E
349
400 550 400L/A/B
394
450 610 400C/D/E
443
500 680 400C/D/E
492
560 750 400C/D/E
551
630 850 400C/D/E*
620
710 970
450
696
800 1100
450
784
900 1250
450
882
1120 1500
500L
1096
1250 1700
500B
1224
1400 1900
560L
1370
1600 2200
560L
1566
1800 2500
560B
1762
2000 2700
630C
1958
5.5
5.5
5.5
5.5
5.5
5.9
5.9
5.9
5.9
6.2
6.2
6.2
6.2
6.4
6.5
6.8
6.8
6
6
5,5
5,5
5,5
5,6
1.2
1.2
1.2
1.2
1.2
1.2
1.2
1.2
1.2
1.2
1.2
1.2
1.2
1.3
1
1.1
1
1
1
0,8
0,8
0,8
1
2.4
2.4
2.4
2.4
2.4
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.6
2.5
2.7
2.7
2,4
2,4
2,1
2,1
2,1
2,2
4.60
5.91
6.78
7.33
7.33
13.8
16.1
18.4
19.5
19.7
22.7
25.7
28.7
28.9
37.8
44.7
44.7
82,48
92,38
110,25
124,03
137,81
259,09
20
20
20
20
20
15
15
15
15
20
20
20
20
20
20
20
20
18
18
28
28
28
19
44
1665
44
1750
44
1910
44
1980
44
1980
33
2670
33
2820
33
2820
33
3050
44
3500
44
4230
44
4440
44
4640
44
4640
44
5425
44
5875
44
5875
39,6 6980
39,6 7435
61,6 8440
61,6 8950
61,6 9460
41,8 12710
VIII Pólos - 750 RPM - 50HZ
160 220 355L/A/B
210
185 250 355C/D/E
243
200 270 355C/D/E
263
220 300 355C/D/E
289
250 340 355C/D/E
329
280 380 400L/A/B
369
315 430 400L/A/B
415
355 480 400C/D/E
467
400 550 400C/D/E
526
450 610 400C/D/E
592
500 680 400C/D/E*
658
560 750
450
732
630 850
450
824
710 970
450
928
800 1100
500L
1045
900 1250
500C
1175
1000 1350
560L
1306
1120 1500
560L
1462
1250 1700
560B
1632
1400 1900
630L
1828
1600 2200
630L
2089
1800 2500
630C
2350
5.6
5.6
5.6
5.6
5.8
6.0
6.0
6.0
6.0
6.0
6.5
5.5
5.5
5.8
5,5
5,5
5,5
5,5
5,5
5,5
5,5
5,5
1.2
1.2
1.2
1.2
1.3
1.1
1.1
1.1
1.1
1.1
1.3
0.9
0.9
1
0,8
0,8
1
1
1
1
1
1
2.2
2.2
2.2
2.2
2.5
2.3
2.3
2.3
2.3
2.3
2.5
2.3
2.3
2.4
2
2
2
2
2
1,8
1,8
1,8
10.9
12.3
14.1
16.4
17.5
30.4
35.0
37.4
39.7
44.3
47.5
54.8
65.4
65.4
111,97
124,41
209,14
233,41
261,42
341,13
383,77
426,41
20
20
20
20
15
19
19
19
19
19
19
30
30
22
36
36
24
24
24
23
23
23
44
2260
44
2540
44
2670
44
2820
33
2900
42
3500
42
3700
42
4330
42
4440
42
4640
42
4790
66
5725
66
6085
48
6085
79,2 7265
79,2 7715
52,8 8500
52,8 8985
52,8 9540
50,6 11785
50,6 12470
50,6 13155
High-Output Design
280 380 315C/D/E*
280 380 355C/D/E*
315 430 315C/D/E*
450 610 355C/D/E*
500 680
450
630 850
450
6.5
5.8
6.6
6.4
5.5
6.5
1.0
1.3
1.6
1.6
0.9
1
2.3
2.5
2.3
2.5
2.3
2.5
4.10
18.4
7.15
13.4
54.8
35.4
12
15
10
18
30
20
Output
Frame
kW
NOTA
HP
Full Load
Torque
(kgfm)
91.7
368
207
295
654
618
1) Para carga com torque parabólico
Break-down
Inercia J
Torque
(kgm2)
Tb/Tn
26
33
22
40
66
44
1850
2980
1985
2880
5575
5200
6600 V
% of full load
Efficiency
Power Factor
Maximum
Full load
Load
current
Inercia
100 In (A) (kgm2) (1)
Rated
speed
(rpm)
50
75
100
50
75
73
73
73
73
73
77
77
77
77
77
77
77
77
77
85
85
85
85
85
88
88
88
90
984
984
984
984
984
990
990
990
990
990
990
990
990
990
993
994
994
995
995
995
995
995
995
92.6
93.1
93.3
93.5
93.6
94.0
94.1
94.4
94.5
95.0
95.1
95.3
95.5
95.6
95.6
95.8
95.8
96,2
96,4
96,6
96,8
97
96,8
93.2
93.6
93.8
94.0
94.0
94.7
94.9
95.1
95.3
95.4
95.6
95.8
96.0
96.1
96.1
96.3
96.3
96,7
96,9
97
97,2
97,4
97,3
93.3
93.8
94.0
94.1
94.2
94.6
94.8
95.0
95.2
95.4
95.6
95.8
96.0
96.1
96.1
96.3
96.3
96,8
97
97
97,2
97,4
97,4
0.64
0.64
0.64
0.64
0.64
0.63
0.63
0.63
0.63
0.72
0.72
0.72
0.71
0.67
0.76
0.75
0.75
0,76
0,76
0,82
0,82
0,82
0,8
0.75
0.75
0.75
0.75
0.75
0.75
0.75
0.75
0.75
0.81
0.81
0.81
0.80
0.78
0.83
0.82
0.81
0,83
0,83
0,87
0,87
0,87
0,86
0.80
0.80
0.80
0.80
0.80
0.80
0.80
0.80
0.80
0.84
0.84
0.84
0.84
0.82
0.86
0.86
0.85
0,86
0,86
0,88
0,88
0,88
0,88
15.5
18.7
21.5
23.2
25.5
28.9
32.3
36.3
40.8
43.7
49.0
54.4
60.7
69.9
75.2
84.5
96.2
117,7
131,1
143,5
163,6
183,7
204,1
218
264
306
330
364
312
348
392
443
674
758
842
943
1150
1090
1390
1500
1531
1709
2327
2659
2991
2634
75
75
75
75
75
75
75
75
75
75
75
80
80
80
82
82
82
82
82
82
82
82
741
741
741
741
741
740
740
740
740
740
740
745
745
745
746
746
746
746
746
746
746
746
93.0
93.4
93.5
93.7
93.8
94.5
94.7
94.9
94.9
95.1
95.2
95.2
95.3
95.5
95,7
95,9
95,3
95,5
95,7
96,1
96,3
96,5
93.4
93.8
93.9
94.1
94.2
94.6
94.8
95.0
95.0
95.4
95.6
95.7
95.9
96.0
96,3
96,5
96,1
96,3
96,5
96,6
96,8
97
93.5
93.9
94.0
94.2
94.3
94.6
94.8
95.0
95.0
95.4
95.6
95.7
95.9
96.0
96,3
96,5
96,3
96,5
96,7
96,6
96,8
97
0.60
0.61
0.61
0.61
0.57
0.70
0.70
0.70
0.70
0.69
0.66
0.70
0.70
0.67
0,72
0,72
0,74
0,74
0,74
0,81
0,81
0,81
0.71
0.72
0.72
0.72
0.69
0.79
0.79
0.79
0.79
0.79
0.76
0.79
0.79
0.77
0,81
0,81
0,81
0,81
0,81
0,85
0,85
0,85
0.77
0.78
0.78
0.78
0.75
0.82
0.82
0.82
0.82
0.81
0.80
0.83
0.83
0.81
0,83
0,83
0,83
0,83
0,83
0,86
0,86
0,86
19.4
22.1
23.9
26.2
30.9
31.6
35.4
39.9
44.9
49.7
57.2
61.7
69.2
79.9
87,6
98,3
109,4
122,3
136,2
147,4
168,1
188,8
427
494
534
586
586
700
787
889
1000
1130
1480
2020
2270
2050
2871
3230
2676
2997
3345
3210
3668
4127
75
75
75
79
80
85
2975
741
1482
1488
745
993
94.3
93.9
94.3
94.9
95.2
95.4
94.7
94.3
94.8
95.7
95.6
96.0
94.8
94.4
95.0
95.8
95.6
96.0
0.77
0.55
0.70
0.73
0.70
0.76
0.85
0.67
0.80
0.81
0.79
0.83
0.87
0.74
0.84
0.85
0.83
0.86
29.7
35.1
34.5
48.3
55.1
66.8
23
657
124
346
1800
967
Sound
dB(A)
Dados elétricos - Mercado Brasil 60Hz - Tensões 440V- 4160V- 6600V
Conjugado Corrente Conjugado
Tempo
Conjugado Momento
máximo com
Potência
Nominal com rotor com rotor
Carcaça
máximo de Inercia
rotor
Cn
bloqueado bloqueado
Cmáx/Cn J (kgm2)
kW
cv
Il/In
Cp/Cn
(kgfm)
Quente Frio
II Pólos - 3600 RPM - 60HZ
220 300 315C/D/E
59.8
6.5
0.9
2.5
2.96
28
62
260 350 315C/D/E
70.8
6.5
0.9
2.5
3.47
24
53
300 400 315C/D/E
81.7
6.5
1
2.5
3.90
24
53
330 450 315C/D/E
89.9
6.8
1
2.5
4.34
24
53
370 500 355C/D/E
101
6.0
0.9
2.4
5.17
45
99
400 550 355C/D/E
109
6.0
0.9
2.4
5.75
40
88
440 600 355C/D/E
120
6.5
0.9
2.2
6.13
36
79
480 650 355C/D/E
131
6.5
0.9
2.3
6.51
36
79
515 700 355C/D/E
140
6.5
0.9
2.3
7.17
45
99
560 750 355C/D/E
153
6.7
1
2.4
7.92
40
88
590 800 400L/A/B
161
6.7
1.3
2.4
11.0
26
57
630 850 400L/A/B
171
6.9
1.3
2.4
11.9
26
57
660 900 400L/A/B
180
6.9
1.3
2.4
11.9
26
57
700 950 400L/A/B
191
6.9
1.3
2.4
12.9
26
57
750 1000 400L/A/B
204
7.4
1.4
2.5
12.9
26
57
Peso
(kg)
Nível médio
de pressão
RPM
sonora
dB(A)
440 V
% da potência nominal
Inércia
Corrente máxima da
Rendimento ƞ
Fator de potência (Cosφ)
nominal
carga
50 75 100 50 75 100 In (A) (kgm2) (1)
1600
1690
1770
1880
2400
2540
2590
2670
2700
2820
3420
3550
3550
3670
3700
79
79
79
79
86
86
86
86
86
86
89
89
89
89
89
3581
3579
3577
3575
3573
3573
3577
3575
3576
3574
3580
3580
3580
3579
3580
94.4
94.8
95.2
95.6
95.6
95.6
95.7
95.8
96.0
96.0
95.5
95.6
95.7
95.8
95.9
95.3
95.5
96.0
96.2
96.2
96.3
96.4
96.5
96.7
96.7
96.3
96.3
96.4
96.4
96.5
95.6
95.7
96.1
96.3
96.3
96.3
96.5
96.6
96.6
96.7
96.5
96.5
96.6
96.6
96.7
0.84
0.85
0.86
0.85
0.86
0.86
0.87
0.87
0.88
0.86
0.84
0.84
0.85
0.85
0.85
0.89
0.89
0.89
0.89
0.89
0.90
0.89
0.90
0.91
0.90
0.90
0.90
0.90
0.90
0.90
0.90
0.91
0.90
0.91
0.90
0.91
0.91
0.91
0.92
0.91
0.91
0.91
0.91
0.91
0.91
336
392
455
494
560
599
657
716
760
835
882
941
985
1040
1120
33
33
40
44
89
84
75
86
117
124
91
97
102
108
127
IV Pólos - 1800 RPM - 60HZ
220 300 315L/A/B
120
260 350 315C/D/E
142
300 400 315C/D/E
164
330 450 315C/D/E
180
370 500 315C/D/E
202
400 550 315C/D/E
218
440 600 315C/D/E
240
480 650 355C/D/E
262
515 700 355C/D/E
281
560 750 355C/D/E
305
590 800 400L/A/B
321
630 850 400L/A/B
343
660 900 400L/A/B
360
700 950 400L/A/B
381
750 1000 400C/D/E
409
800 1100 400C/D/E
435
900 1250
450
489
1000 1350
450
544
1100 1500
450
598
7.0
7.0
7.0
7.0
6.8
7.0
7.0
6.5
6.5
6.5
7.3
7.3
7.3
7.3
7.3
7.8
7.0
7.0
7.0
1.2
1.2
1.3
1.3
1.3
1.3
1.4
1.4
1.5
1.5
1.2
1.2
1.5
1.5
1.5
1.5
0.8
0.8
0.8
2.4
2.4
2.5
2.5
2.5
2.5
2.5
2.3
2.3
2.3
2.1
2.1
2.2
2.1
2.1
2.1
2.5
2.5
2.5
4.37
4.94
5.75
6.32
7.01
7.59
8.16
12.9
13.8
15.3
16.0
17.7
18.3
19.3
20.0
21.2
22.0
25.0
26.5
22
22
20
19
19
18
16
33
33
33
17
17
16
17
18
18
20
20
20
48
48
44
42
42
40
35
73
73
73
37
37
35
37
40
40
44
44
44
1550
1700
1800
1870
1920
2000
2060
2820
2900
3050
3550
3700
3750
3850
4430
4500
5120
5420
5570
79
79
79
79
79
79
79
83
83
83
83
83
83
83
83
83
90
90
90
1784
1784
1784
1784
1784
1784
1783
1787
1788
1788
1788
1788
1788
1788
1788
1790
1792
1792
1792
94.5
94.7
95.0
95.2
95.4
95.4
95.5
95.6
95.9
95.9
96.0
96.0
96.0
96.1
96.3
96.3
95.8
96.0
96.1
95.3
95.5
95.7
95.8
96.0
96.0
96.1
96.3
96.5
96.5
96.7
96.7
96.8
96.9
97.0
97.0
96.5
96.7
96.8
95.6
95.8
96.0
96.1
96.1
96.2
96.3
96.4
96.6
96.6
96.9
96.9
97.0
97.0
97.0
97.0
96.6
96.8
96.9
0.75
0.75
0.75
0.75
0.76
0.76
0.77
0.79
0.79
0.79
0.74
0.74
0.76
0.76
0.76
0.74
0.76
0.76
0.76
0.83
0.83
0.83
0.83
0.84
0.84
0.84
0.85
0.85
0.85
0.82
0.82
0.82
0.82
0.83
0.82
0.84
0.84
0.84
0.86
0.86
0.86
0.86
0.86
0.86
0.87
0.87
0.87
0.87
0.85
0.85
0.85
0.85
0.86
0.85
0.87
0.87
0.87
351
414
477
524
587
634
689
751
804
874
940
1000
1050
1110
1180
1270
1410
1560
1710
120
142
161
168
188
192
195
409
456
495
210
223
263
285
325
346
381
423
466
VI Pólos - 1200 RPM - 60HZ
185 250 315C/D/E
152
220 300 315C/D/E
181
260 350 315C/D/E
214
300 400 355L/A/B
246
330 450 355L/A/B
271
370 500 355C/D/E
303
400 550 355C/D/E
328
440 600 355C/D/E
361
480 650 355C/D/E
394
515 700 400L/A/B
421
560 750 400L/A/B
458
590 800 400L/A/B
482
630 850 400C/D/E
515
660 900 400C/D/E
539
700 950
450
572
750 1000
450
612
800 1100
450
653
900 1250
450
734
1000 1350
450
816
6.1
6.1
6.1
6.1
6.1
6.2
6.1
6.1
6.1
6.3
6.3
6.3
6.3
6.5
6.5
6.5
6.5
6.5
6.5
1.2
1.3
1.3
1.2
1.2
1.3
1.3
1.3
1.3
1.3
1.3
1.3
1.3
1.4
0.7
0.8
0.8
0.8
0.8
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.2
2.2
2.2
2.4
2.3
2.3
2.3
2.3
2.3
7.46
8.76
10.3
11.9
13.1
14.3
16.0
16.7
17.7
22.0
23.2
24.8
26.4
27.9
37.4
37.4
39.9
44.2
44.2
17
16
16
26
26
26
25
25
25
18
19
20
20
20
20
20
20
20
20
37
35
35
57
57
57
55
55
55
40
42
44
44
44
44
44
44
44
44
1655
1770
1860
2205
2300
2700
2800
2900
2980
3615
3700
3800
4440
4540
5420
5420
5570
5870
5870
77
77
77
81
81
81
81
81
81
81
81
81
81
81
88
88
88
88
88
1186
1186
1186
1188
1188
1188
1188
1188
1187
1192
1192
1192
1192
1192
1193
1193
1194
1194
1194
94.3
94.7
94.9
95.2
95.4
95.5
95.5
95.6
95.6
96.1
96.1
96.1
96.1
96.2
96.5
96.6
96.6
96.7
96.8
94.8
95.2
95.4
95.9
95.9
96.2
96.2
96.3
96.3
96.5
96.5
96.5
96.5
96.6
96.7
96.8
96.8
96.9
97.0
94.9
95.1
95.4
95.8
95.9
96.2
96.2
96.3
96.3
96.5
96.5
96.5
96.5
96.6
96.7
96.8
96.8
96.9
97.0
0.75
0.77
0.77
0.74
0.75
0.75
0.75
0.75
0.75
0.71
0.70
0.69
0.69
0.69
0.78
0.78
0.78
0.76
0.76
0.84
0.84
0.85
0.83
0.83
0.83
0.83
0.83
0.83
0.81
0.80
0.80
0.80
0.80
0.84
0.84
0.84
0.84
0.84
0.86
0.87
0.87
0.85
0.85
0.86
0.86
0.86
0.86
0.85
0.84
0.84
0.84
0.84
0.87
0.87
0.87
0.87
0.87
297
349
411
483
531
587
634
697
761
824
907
955
1020
1070
1090
1170
1250
1400
1550
183
212
251
458
504
588
610
672
735
554
564
627
669
793
573
651
693
781
872
VIII Pólos - 900 RPM - 60HZ
150 200 315C/D/E
164
185 250 315C/D/E
203
220 300 315C/D/E
241
260 350 355L/A/B
284
300 400 355L/A/B
328
330 450 355C/D/E
360
370 500 400L/A/B
404
400 550 400L/A/B
436
440 600 400L/A/B
480
480 650 400L/A/B
524
515 700 400L/A/B
562
560 750 400C/D/E
611
590 800 400C/D/E
644
630 850
450
686
660 900
450
718
700 950
450
762
750 1000
450
816
5.5
5.5
5.5
5.5
5.5
5.7
6.6
6.6
6.6
6.6
6.6
6.6
6.6
5.9
5.9
5.9
5.9
1.2
1.2
1.2
1.2
1.2
1.2
1.1
1.1
1.1
1.1
1.1
1.1
1.1
0.8
0.8
0.8
0.8
2.4
2.3
2.5
2.3
2.3
2.3
2.3
2.3
2.3
2.3
2.3
2.3
2.3
2.1
2.1
2.1
2.1
8.39
10.1
11.9
15.7
17.6
20.1
28.1
30.5
32.8
35.1
37.3
44.3
44.3
53.3
57.1
60.2
64.6
24
26
21
21
23
17
22
22
22
22
22
22
22
26
26
26
26
53
57
46
46
51
37
48
48
48
48
48
48
48
57
57
57
57
1730
1865
2005
2250
2350
2820
3390
3500
3600
3700
3800
4640
4640
5570
5720
5870
6080
75
75
75
79
79
79
79
79
79
79
79
79
79
82
82
82
82
889
888
889
892
891
892
893
893
893
893
893
893
893
895
895
895
895
94.1
94.5
94.9
95.0
95.3
95.4
95.0
95.0
95.1
95.1
95.2
95.3
95.4
96.1
96.1
96.3
96.3
94.7
95.1
95.3
95.5
95.8
96.0
95.6
95.7
95.8
95.8
95.9
96.0
96.1
96.5
96.5
96.6
96.6
94.7
95.1
95.3
95.5
95.7
95.9
95.9
96.0
96.1
96.1
96.2
96.3
96.4
96.5
96.5
96.6
96.6
0.68
0.70
0.68
0.68
0.68
0.68
0.67
0.67
0.67
0.67
0.67
0.67
0.67
0.70
0.70
0.70
0.72
0.78
0.78
0.78
0.78
0.78
0.78
0.78
0.78
0.78
0.78
0.78
0.78
0.78
0.80
0.80
0.80
0.81
0.82
0.82
0.82
0.82
0.82
0.82
0.82
0.82
0.82
0.82
0.82
0.82
0.82
0.85
0.85
0.85
0.86
253
311
369
436
502
551
617
667
733
799
857
931
979
1010
1060
1120
1180
364
469
485
523
664
533
739
799
880
960
1030
1120
1180
1150
1200
1270
1370
Conjugado Corrente Conjugado
Tempo
Conjugado Momento
Nominal com rotor com rotor
máximo com
máximo de Inercia
Cn
rotor
bloqueado bloqueado
Cmáx/Cn J (kgm2)
kW
cv
Il/In
(kgfm)
Cp/Cn
Quente Frio
X Pólos - 720 RPM - 60HZ
90
125 315L/A/B
123
5.5
1.5
2.0
6.90
15
33
110 150 315L/A/B
151
5.5
1.5
2
8.39
15
33
132 175 315C/D/E
181
5.5
1.5
2
10.1
15
33
150 200 315C/D/E
206
5.8
1.6
2
11.9
15
33
185 250 355L/A/B
253
5.5
1.3
2.2
17.0
20
44
220 300 355C/D/E
301
5.5
1.3
2.2
19.5
20
44
260 350 355C/D/E
355
5.5
1.3
2.2
23.9
20
44
300 400 400L/A/B
409
5.5
1
2.2
26.5
22
48
330 450 400L/A/B
450
5.5
1
2.2
31.1
22
48
370 500 400L/A/B
505
5.5
1
2.2
33.5
22
48
400 550 400L/A/B
546
5.5
1
2.2
33.1
22
48
440 600 400L/A/B
600
5.5
1
2.2
40.4
22
48
480 650
450
655
6.2
0.8
2.2
62.0
25
55
515 700
450
703
6.2
0.8
2.2
66.0
25
55
560 750
450
764
6.2
0.8
2.2
70.0
25
55
590 800
450
805
6.2
0.8
2.2
75.0
25
55
630 850
450
859
6.2
0.8
2.2
80.0
25
55
Potência
Carcaça
XII Pólos - 600 RPM - 60HZ
132 175 355L/A/B
150 200 355L/A/B
185 250 355L/A/B
185 250 355C/D/E
220 300 400L/A/B
260 350 400L/A/B
300 400 400C/D/E
330 450
450
370 500
450
400 550
450
440 600
450
480 650
450
515 700
450
560 750
450
NOTA
217
246
304
304
362
428
493
540
606
655
720
786
843
917
4.5
4.5
4.5
4.5
5.0
5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.5
1.2
1.2
1.2
1.2
1
1
0.9
0.8
0.8
0.8
0.8
0.8
0.8
0.8
1.7
1.7
1.7
1.7
2
2
2
1.9
1.9
1.9
1.9
1.9
1.9
1.9
18.1
19.0
22.7
22.7
33.7
35.3
42.0
59.1
59.1
63.4
67.6
72.0
76.2
80.5
20
20
20
20
20
20
20
40
40
40
40
40
40
40
44
44
44
44
44
44
44
88
88
88
88
88
88
88
Peso
(kg)
Nível médio
de pressão
RPM
sonora
dB(A)
440 V
% da potência nominal
Inércia
Corrente máxima da
Rendimento ƞ
Fator de potência (Cosφ)
nominal
carga
50 75 100 50 75 100 In (A) (kgm2) (1)
1550
1650
1850
1980
2300
2700
3000
3340
3580
3690
3930
4050
4770
4900
5020
5150
5305
80
80
80
80
82
82
82
82
82
82
82
82
82
82
82
82
82
710
710
710
710
713
713
713
714
714
714
714
714
714
714
714
714
714
91.8
92.2
92.6
92.8
93.0
93.3
93.6
94.9
95.1
95.3
95.5
95.7
95.6
95.7
95.7
95.8
95.8
93.0
93.3
93.6
93.9
94.0
94.3
94.6
95.6
95.8
96.0
96.2
96.4
96.1
96.2
96.2
96.4
96.4
93.0
93.3
93.6
93.9
94.2
94.5
94.8
95.6
95.8
96.0
96.2
96.4
96.1
96.2
96.2
96.4
96.4
0.51
0.51
0.51
0.51
0.48
0.49
0.49
0.60
0.60
0.60
0.60
0.60
0.67
0.67
0.67
0.67
0.67
0.63
0.63
0.63
0.63
0.60
0.61
0.61
0.72
0.72
0.72
0.72
0.72
0.77
0.77
0.77
0.77
0.77
0.70
0.70
0.70
0.70
0.67
0.68
0.68
0.78
0.78
0.78
0.78
0.78
0.81
0.81
0.81
0.81
0.81
181
221
264
299
385
449
529
528
579
648
699
768
809
867
943
991
1060
203
248
298
353
554
660
779
862
946
1060
1150
1260
1400
1500
1630
1720
1840
2380
2420
2820
2820
3460
3635
4340
4555
4650
4790
5050
5200
5310
5620
82
82
82
82
82
82
82
82
82
82
82
82
82
82
593
593
592
592
592
592
593
595
595
595
595
595
595
595
93.8
93.8
93.9
93.9
94.0
94.0
94.4
95.3
95.4
95.5
95.6
95.7
95.8
95.9
94.3
94.3
94.3
94.3
94.3
94.9
94.9
95.5
95.6
95.7
95.8
95.9
96.0
96.1
94.3
94.3
94.3
94.3
94.5
95.0
95.1
95.5
95.6
95.7
95.8
95.9
96.0
96.1
0.50
0.50
0.50
0.50
0.57
0.57
0.59
0.61
0.61
0.61
0.61
0.62
0.62
0.62
0.61
0.61
0.62
0.62
0.69
0.69
0.69
0.71
0.71
0.71
0.71
0.72
0.72
0.72
0.67
0.67
0.68
0.68
0.76
0.76
0.76
0.77
0.77
0.77
0.77
0.78
0.78
0.78
274
312
379
379
402
473
545
589
660
712
783
842
902
980
423
482
598
598
745
885
961
1890
2120
2300
2530
2760
2960
3220
1) Para carga com torque parabólico
Conjugado Corrente Conjugado
Tempo
Conjugado Momento
Nominal com rotor com rotor
máximo com
máximo de Inercia
Cn
bloqueado bloqueado
rotor
Cmáx/Cn J (kgm2)
(kgfm)
kW
cv
Il/In
Cp/Cn
Quente Frio
II Pólos - 3600 RPM - 60HZ
220 300 315C/D/E
60.0
6.2
1
2.1
3.40
20
44
260 350 315C/D/E
70.8
6.5
1
2.1
3.80
18
40
300 400 315C/D/E
81.7
6.5
1.1
2.2
4.00
15
33
330 450 315C/D/E
89.9
6.5
1.1
2.2
4.40
15
33
370 500 355C/D/E
101
6.3
1
2.2
5.50
20
44
400 550 355C/D/E
109
6.5
1
2.2
5.80
20
44
440 600 355C/D/E
120
6.5
1
2.2
6.40
20
44
480 650 355C/D/E
131
6.6
1
2.2
6.70
20
44
515 700 400L/A/B
140
6.6
1.3
2.5
8.90
20
44
560 750 400L/A/B
152
6.6
1.3
2.5
9.40
20
44
590 800 400L/A/B
161
6.6
1.3
2.5
10.2
20
44
630 850 400L/A/B
171
6.6
1.3
2.5
10.2
20
44
660 900 400L/A/B
180
6.8
1.4
2.5
10.7
20
44
700 950 400C/D/E
190
6.8
1.4
2.5
11.9
20
44
750 1000 400C/D/E
204
6.8
1.4
2.5
12.8
20
44
800 1100 400C/D/E
218
7.4
1.5
2.7
13.6
20
44
900 1250 400C/D/E*
245
7.4
1.5
2.7
15.3
20
44
1000 1350
450
271
7.5
0.7
2.3
25.2
20
44
1100 1500
450
299
7.5
0.7
2.4
26.6
20
44
1250 1700
450*
339
7.5
0.7
2.4
26.6
20
44
Potência
Carcaça
IV Pólos - 1800 RPM - 60HZ
110 150 315L/A/B
60.2
132 175 315L/A/B
72.2
150 200 315C/D/E
82.0
185 250 315C/D/E
101
220 300 315C/D/E
120
260 350 315C/D/E
142
300 400 315C/D/E
164
330 450 315C/D/E
180
370 500 315C/D/E
202
400 550 355C/D/E
218
440 600 355C/D/E
240
480 650 355C/D/E
262
515 700 355C/D/E
281
560 750 400L/A/B
305
590 800 400L/A/B
321
630 850 400L/A/B
343
660 900 400L/A/B
359
700 950 400C/D/E
381
750 1000 400C/D/E
408
810 1100 400C/D/E
441
900 1250 400C/D/E
490
1000 1350
450
544
1100 1500
450
598
1250 1700
450
680
1400 1900
450
761
1600 2200
500L
869,15784
1800 2500
500L
977,80257
2000 2700
500C
1086,4473
2250 3000
560L
1220,8914
2500 3400
560B
1356,546
2800 3800
630L
1519,3315
3150 4300
630L
1709,2479
3550 4800
630C
1926,2953
6.0
6.0
6.0
6.1
6.0
6.0
6.5
6.5
6.5
6.6
6.6
6.8
6.8
6.8
6.8
6.9
6.9
7.0
7.2
7.5
7.5
6.5
6.5
6.5
6.5
6,9
6,9
6,9
6,7
6,7
6,7
6,7
6,7
1.2
1.2
1.4
1.4
1.4
1.5
1.6
1.6
1.6
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
0.7
0.7
0.7
0.7
0,9
0,9
0,9
0,7
0,7
0,7
0,7
0,7
2.4
2.4
2.1
2.1
2.4
2.4
2.5
2.6
2.6
2.5
2.5
2.6
2.6
2.7
2.7
2.7
2.7
2.7
2.7
2.7
2.7
2.4
2.4
2.4
2.4
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2.93
2.93
3.25
4.00
4.44
5.11
6.61
7.15
7.69
11.6
11.6
12.4
13.4
19.5
19.5
21.0
21.0
22.5
24.0
25.5
26.9
23.5
24.9
28.0
29.4
40,91
46,03
51,14
89,33
99,26
200,4
225,45
254,08
15
15
15
15
15
15
15
15
15
16
16
16
20
20
20
20
20
20
20
20
20
20
20
20
20
18
18
18
26
26
27
27
27
33
33
33
33
33
33
33
33
33
35
35
35
44
44
44
44
44
44
44
44
44
44
44
44
44
39,6
39,6
39,6
57,2
57,2
59,4
59,4
59,4
Peso
(kg)
Nível médio
de pressão
RPM
sonora
dB(A)
4160 V
% da potência nominal
Inércia
Corrente máxima da
Rendimento ƞ
Fator de potência (Cos φ) nominal
carga
50 75 100 50 75 100 In (A) (kgm2) (1)
1700
1800
1905
1980
2540
2590
2670
2680
3250
3300
3400
3400
3450
4130
4200
4450
4575
5423
5573
5573
79
79
79
79
86
86
86
86
89
89
89
89
89
89
89
89
89
90
90
90
3573
3575
3575
3575
3574
3574
3574
3574
3578
3578
3578
3580
3580
3580
3580
3580
3580
3588
3588
3588
93.3
93.8
94.2
94.6
93.8
94.1
94.3
94.4
94.0
94.2
94.5
94.8
95.0
95.2
95.4
95.6
95.8
95.3
95.5
95.6
94.2
94.7
95.0
95.1
94.8
94.9
95.1
95.2
95.0
95.3
95.4
95.5
95.6
95.7
95.9
96.1
96.3
96.1
96.2
96.3
94.2
94.7
95.0
95.1
94.9
95.0
95.2
95.3
95.2
95.4
95.5
95.6
95.7
95.8
96.0
96.2
96.4
96.3
96.4
96.5
0.83
0.83
0.83
0.83
0.83
0.83
0.83
0.83
0.78
0.79
0.80
0.80
0.80
0.81
0.81
0.81
0.81
0.84
0.84
0.84
0.88
0.88
0.88
0.88
0.88
0.88
0.88
0.88
0.84
0.85
0.86
0.85
0.85
0.86
0.86
0.86
0.86
0.89
0.89
0.89
0.89
0.89
0.89
0.89
0.89
0.89
0.89
0.89
0.87
0.88
0.88
0.88
0.88
0.88
0.88
0.88
0.88
0.90
0.90
0.90
36.4
42.8
49.2
54.1
60.8
65.7
72.1
78.5
86.3
92.6
97.4
104
109
115
123
131
147
160
176
200
19
20
21
23
34
37
41
45
62
68
71
77
84
88
94
113
127
71
85
100
1400
1400
1430
1520
1570
1750
1930
1950
2060
2745
2745
2800
2900
3500
3500
3600
3700
4230
4330
4440
4540
5275
5425
5725
5875
6705
7145
7585
9915
10535
12265
13010
13860
79
79
79
79
79
79
79
79
79
83
83
83
83
83
83
83
83
83
83
83
83
90
90
90
90
90
90
90
90
90
90
90
90
1780
1780
1782
1782
1782
1782
1783
1784
1783
1787
1787
1787
1788
1790
1790
1790
1790
1790
1790
1790
1790
1791
1791
1791
1791
1793
1793
1793
1795
1795
1795
1795
1795
91.1
91.8
92.4
93.4
93.7
93.8
94.2
94.3
94.5
94.7
94.8
94.8
94.9
94.7
94.8
94.9
95.0
95.1
95.3
95.3
95.5
95.5
95.7
95.9
96.1
96,6
96,7
96,8
96,3
96,4
96,3
96,4
96,5
92.5
93.0
93.6
94.0
94.4
94.6
94.7
94.9
94.9
95.4
95.5
95.5
95.6
95.6
95.7
95.8
95.9
95.9
96.0
96.0
96.2
96.3
96.4
96.5
96.7
97,2
97,3
97,4
97
97,1
97
97,1
97,2
92.7
93.2
93.6
94.0
94.5
94.8
94.8
95.1
95.3
95.5
95.6
95.6
95.7
95.7
95.8
95.9
96.0
96.0
96.1
96.1
96.3
96.4
96.5
96.5
96.8
97,3
97,4
97,5
97,3
97,4
97,2
97,3
97,4
0.70
0.72
0.74
0.74
0.74
0.75
0.73
0.73
0.74
0.74
0.75
0.75
0.75
0.73
0.73
0.73
0.73
0.73
0.73
0.71
0.71
0.79
0.79
0.79
0.79
0,8
0,8
0,8
0,81
0,81
0,84
0,84
0,84
0.78
0.80
0.82
0.82
0.82
0.83
0.83
0.82
0.82
0.82
0.83
0.83
0.83
0.82
0.82
0.82
0.82
0.82
0.82
0.80
0.80
0.85
0.85
0.85
0.85
0,86
0,86
0,86
0,87
0,87
0,89
0,89
0,89
0.83
0.84
0.85
0.85
0.86
0.86
0.86
0.86
0.86
0.85
0.86
0.86
0.86
0.85
0.85
0.85
0.85
0.85
0.85
0.84
0.84
0.87
0.87
0.87
0.87
0,89
0,89
0,89
0,89
0,89
0,9
0,9
0,9
19.8
23.4
26.2
32.1
37.6
44.3
51.1
56.0
62.7
68.4
74.3
81.0
86.8
95.5
101
107
112
119
127
139
154
165
182
207
231
256,4
288,2
319,9
360,6
400,3
444,2
499,2
562
40
48
52
65
87
107
132
151
169
179
198
224
303
335
354
378
397
421
451
488
543
384
423
481
541
674
758
842
1246
1384
1610
1811
2041
Tempo
Conjugado Corrente Conjugado
Conjugado Momento
máximo com
Nominal com rotor com rotor
Carcaça
máximo de Inercia
rotor
Cn
bloqueado bloqueado
Cmáx/Cn J (kgm2)
kW
cv
Il/In
Cp/Cn
(kgfm)
Quente Frio
VI Pólos - 1200 RPM - 60HZ
150 200 315C/D/E
124
6.0
1.6
2.2
7.28
14
31
185 250 315C/D/E
153
6.2
1.6
2.2
8.35
12
26
220 300 315C/D/E
181
6.2
1.6
2.2
10.8
12
26
260 350 315C/D/E
214
7.0
1.8
2.5
11.7
10
22
300 400 355L/A/B
246
6.0
1.2
2.3
11.3
18
40
330 450 355L/A/B
270
6.0
1.2
2.3
13.8
18
40
370 500 355C/D/E
303
6.0
1.2
2.3
15.0
18
40
400 550 355C/D/E
328
6.4
1.2
2.3
17.3
18
40
440 600 355C/D/E
360
6.6
1.3
2.5
18.4
18
40
480 650 355C/D/E
393
6.6
1.2
2.4
19.5
18
40
515 700 400L/A/B
422
6.8
1.7
2.8
19.9
20
44
560 750 400L/A/B
458
6.8
1.7
2.8
21.4
20
44
590 800 400L/A/B
483
6.8
1.7
2.8
22.9
20
44
630 850 400C/D/E
516
6.8
1.7
2.8
24.3
20
44
660 900 400C/D/E
540
6.8
1.7
2.8
25.9
20
44
700 950 400C/D/E
573
6.8
1.7
2.8
27.3
20
44
750 1000 400C/D/E
614
6.8
1.7
2.8
28.9
20
44
800 1100
450
654
5.9
0.8
2.4
33.3
23
51
900 1250
450
735
6.1
0.8
2.4
37.8
23
51
1000 1350
450
816
6.3
0.8
2.4
40.1
23
51
1100 1500
450
897
6.8
0.8
2.4
42.4
17
37
1250 1700
450*
1020
7.0
0.8
2.5
44.7
17
37
1400 1900
500L
1140,1338
6,2
1,2
2,5
86,08
19
41,8
1600 2200
500B
1303,01
6,2
1,2
2,5
98,38
19
41,8
1800 2500
560L
1467,113
5,6
0,8
2,3
118,12
30
66
2000 2700
560L
1630,1255
5,6
0,8
2,3
131,24
30
66
2250 3000
560B
1833,8912
5,6
0,8
2,3
147,65
30
66
2500 3400
630C
2037,6569
5,6
0,9
2,2
259,09
17
37,4
1610
1740
1870
1940
2210
2380
2740
2900
2950
3060
3500
3600
3700
4330
4440
4540
4640
5125
5425
5575
5725
5873
7195
7765
8725
9210
9815
12715
77
77
77
77
81
81
81
81
81
81
81
81
81
81
81
81
81
88
88
88
88
88
88
88
90
90
90
90
VIII Pólos - 900 RPM - 60HZ
132 175 315C/D/E
145
150 200 315C/D/E
164
185 250 315C/D/E
203
220 300 315C/D/E
241
260 350 355L/A/B
284
300 400 355C/D/E
328
330 450 355C/D/E
361
370 500 400L/A/B
404
400 550 400L/A/B
437
440 600 400L/A/B
481
480 650 400L/A/B
525
515 700 400C/D/E
562
560 750 400C/D/E
611
590 800 400C/D/E
644
630 850 400C/D/E
688
660 900 400C/D/E*
721
700 950
450
762
750 1000
450
817
800 1100
450
872
1000 1350
500L
1088,2682
1120 1500
500C
1218,8603
1250 1700
560L
1358,817
1400 1900
560L
1521,875
1600 2200
560B
1739,2857
1800 2500
630L
1956,6964
2000 2700
630L
2174,1071
2250 3000
630C
2445,8705
5.8
5.9
6.1
6.1
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.2
6.2
6.2
6.2
6.2
5.8
5.8
5.8
5,5
5,5
6,4
6,4
6,4
5,5
5,5
5,5
1.2
1.2
1.3
1.3
1.3
1.3
1.3
1
1
1
1.1
1.2
1.2
1.2
1.2
1.2
0.8
0.8
0.8
0,8
0,8
0,9
0,9
0,9
0,8
0,8
0,8
2.5
2.5
2.5
2.5
2.2
2.2
2.2
2.3
2.3
2.3
2.4
2.5
2.5
2.5
2.5
2.5
2.2
2.2
2.2
2
2
2,3
2,3
2,3
1,7
1,7
1,7
7.84
8.38
10.1
12.7
14.1
17.3
19.6
30.4
32.8
32.8
35.1
39.7
42.0
44.3
46.6
46.6
54.7
57.9
61.0
111,3
124,66
230,05
257,66
294,47
341,17
379,08
426,46
12
12
12
12
22
22
22
22
22
22
22
22
22
22
22
22
30
30
30
34
34
32
32
32
25
25
25
26
26
26
26
48
48
48
48
48
48
48
48
48
48
48
48
66
66
66
74,8
74,8
70,4
70,4
70,4
55
55
55
1640
1730
1850
2040
2400
2820
3050
3500
3600
3600
3750
4440
4540
4640
4790
4790
5573
5723
5875
7260
7745
8955
9510
10245
11840
12455
13220
X Pólos - 720 RPM - 60HZ
132 175 355L/A/B
181
150 200 355C/D/E
206
185 250 355C/D/E
254
220 300 355C/D/E
302
260 350 400L/A/B
355
300 400 400L/A/B
410
330 450 400L/A/B
451
370 500 400L/A/B
505
400 550 400L/A/B
546
440 600
450
601
480 650
450
656
515 700
450
704
560 750
450
765
590 800
450
806
630 850
450
861
710 950
500L
968,54342
800 1100
500B
1091,3165
900 1250
560L
1224,3017
1000 1350
560L
1360,3352
1120 1500
560A
1523,5754
1250 1700
630L
1700,419
1400 1900
630A
1904,4693
5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.5
5,5
5,5
6
6
6
5,5
5,5
1.2
1.2
1.2
1.2
0.9
0.9
0.9
0.9
0.9
0.9
0.9
0.9
0.9
0.9
0.9
0,8
0,8
1
1
1
0,8
0,8
2.2
2.2
2.2
2.2
2
2
2
2
2
2
2
2
2
2
2
1,8
1,8
2,2
2,2
2,2
1,8
1,8
16.2
18.5
20.8
26.0
20.5
23.0
25.8
29.1
32.8
40.8
43.0
45.3
50.8
54.0
57.1
90,37
101,83
210,12
233,46
261,48
357,65
400,57
11
11
11
11
28
28
28
28
28
31
31
31
31
31
31
32
32
35
35
35
47
47
24
24
24
24
62
62
62
62
62
68
68
68
68
68
68
70,4
70,4
77
77
77
103
103
2400
2535
2670
2975
2935
3065
3215
3385
3580
4715
4830
4935
5205
5400
5520
6020
6380
8390
8840
9380
11420
12035
Potência
Peso
(kg)
Nível médio
de pressão
RPM
sonora
dB(A)
4160 V
% da potência nominal
Rendimento ƞ
Inércia
Corrente máxima da
nominal
carga
100 In (A) (kgm2) (1)
Fator de potência (Cos φ)
50
75
100
50
75
1181
1181
1182
1184
1189
1189
1189
1189
1190
1190
1190
1190
1190
1190
1190
1190
1190
1192
1193
1193
1194
1194
1196
1196
1195
1195
1195
1195
92.8
93.2
93.4
93.6
94.4
94.4
94.8
94.8
94.8
94.9
94.9
95.0
95.2
95.3
95.4
95.5
95.6
95.9
96.1
96.1
96.1
96.1
96,6
96,8
97,1
97,3
97,5
97,1
93.1
93.5
93.8
94.0
94.8
94.9
95.0
95.1
95.2
95.3
95.5
95.6
95.6
95.7
95.8
95.9
96.0
96.3
96.4
96.5
96.5
96.5
97,2
97,4
97,4
97,6
97,8
97,6
93.0
93.5
93.8
94.0
94.8
95.0
95.1
95.1
95.2
95.3
95.6
95.7
95.8
95.9
96.0
96.0
96.1
96.3
96.4
96.5
96.5
96.6
97,3
97,5
97,4
97,6
97,8
97,7
0.71
0.71
0.71
0.69
0.67
0.67
0.69
0.67
0.66
0.66
0.69
0.70
0.71
0.71
0.71
0.71
0.71
0.77
0.76
0.75
0.74
0.67
0,71
0,71
0,81
0,81
0,81
0,79
0.80
0.80
0.80
0.79
0.77
0.77
0.78
0.77
0.76
0.76
0.79
0.79
0.80
0.80
0.80
0.80
0.80
0.84
0.83
0.83
0.80
0.77
0,81
0,81
0,86
0,86
0,86
0,84
0.83
0.83
0.83
0.83
0.81
0.81
0.82
0.81
0.81
0.81
0.83
0.83
0.84
0.84
0.84
0.84
0.84
0.86
0.86
0.86
0.84
0.81
0,84
0,84
0,88
0,88
0,88
0,86
27.0
33.1
39.2
46.3
54.2
59.5
65.8
72.1
79.2
86.3
90.1
97.8
102
109
114
120
129
134
151
167
188
222
237,7
271,1
291,5
323,2
362,8
412,9
126
132
156
183
288
316
355
382
476
479
790
859
905
966
1010
1070
1150
855
960
1070
858
1030
1581
1807
2470
2745
3088
1944
75
75
75
75
79
79
79
79
79
79
79
79
79
79
79
79
82
82
82
85
85
85
85
85
85
85
85
888
889
889
889
891
891
890
891
891
891
891
892
892
892
892
892
895
894
894
895
895
896
896
896
896
896
896
92.2
92.4
92.5
92.9
94.2
94.4
94.7
95.0
95.1
95.2
95.3
95.4
95.5
95.6
95.6
95.7
95.7
95.8
95.9
96,1
96,3
96,3
96,5
96,7
96,3
96,5
96,7
92.7
93.0
93.0
93.4
94.7
94.8
94.9
95.2
95.3
95.4
95.5
95.6
95.7
95.8
95.9
96.0
96.0
96.1
96.2
96,6
96,8
96,8
97
97,2
96,9
97,1
97,3
92.7
93.0
93.0
93.4
94.7
94.8
94.9
95.2
95.3
95.4
95.5
95.6
95.7
95.8
95.9
96.0
96.0
96.1
96.2
96,7
96,9
96,9
97,1
97,3
96,9
97,1
97,3
0.58
0.56
0.58
0.57
0.60
0.63
0.64
0.70
0.70
0.70
0.69
0.68
0.68
0.68
0.68
0.67
0.69
0.69
0.70
0,72
0,72
0,8
0,8
0,8
0,79
0,79
0,79
0.69
0.68
0.69
0.68
0.71
0.74
0.75
0.79
0.79
0.79
0.78
0.78
0.78
0.78
0.78
0.77
0.79
0.79
0.79
0,81
0,81
0,85
0,85
0,85
0,83
0,83
0,83
0.76
0.75
0.76
0.76
0.77
0.79
0.79
0.82
0.82
0.82
0.81
0.81
0.81
0.81
0.81
0.81
0.82
0.82
0.82
0,83
0,83
0,87
0,87
0,87
0,85
0,85
0,85
26.0
29.8
36.3
43.0
49.5
55.6
61.1
65.8
71.0
78.1
86.1
92.3
100
106
113
118
123
132
141
172,9
193,3
205,8
230
262,3
303,3
336,3
377,6
163
185
238
282
551
635
700
707
764
844
1010
1170
1270
1340
1430
1510
1570
1690
1800
2355
2637
3419
3829
4376
2557
2841
3197
82
82
82
82
82
82
82
82
82
82
82
82
82
82
82
85
85
85
85
85
85
85
710
710
710
710
713
713
713
713
713
713
713
713
713
713
713
714
714
716
716
716
716
716
91.3
91.6
91.8
92.1
93.9
94.1
94.3
94.5
94.7
95.1
95.2
95.3
95.5
95.6
95.7
96,3
96,5
95,9
96,1
96,3
96,3
96,5
92.5
92.8
93.0
93.3
94.6
94.8
95.0
95.2
95.4
95.4
95.5
95.6
95.8
95.9
96.0
96,5
96,7
96,5
96,7
96,9
96,7
96,9
92.7
93.0
93.2
93.5
94.6
94.8
95.0
95.2
95.4
95.4
95.5
95.6
95.8
95.9
96.0
96,3
96,5
96,6
96,8
97
96,7
96,9
0.43
0.43
0.44
0.44
0.58
0.58
0.59
0.59
0.60
0.66
0.66
0.66
0.66
0.66
0.66
0,77
0,77
0,71
0,71
0,71
0,8
0,8
0.55
0.55
0.56
0.56
0.69
0.69
0.70
0.70
0.71
0.76
0.76
0.76
0.76
0.76
0.76
0,83
0,83
0,81
0,81
0,81
0,85
0,85
0.63
0.63
0.64
0.64
0.74
0.74
0.75
0.75
0.76
0.80
0.80
0.80
0.80
0.80
0.80
0,86
0,86
0,84
0,84
0,84
0,86
0,86
31.4
35.5
43.0
51.0
51.5
59.4
64.3
71.9
76.6
80.0
87.2
93.5
101
107
114
119
133,8
153,9
170,7
190,8
208,6
233,2
200
228
283
335
821
948
1040
1170
1260
1540
1680
1800
1960
2060
2200
2180
2456
4216
4684
5247
5605
6277
2700
2820
2940
3210
3365
4580
4815
5085
5385
5530
5790
6100
7820
8260
8760
11450
12020
12705
82
82
82
82
82
82
82
82
82
85
85
85
85
85
85
85
85
85
594
594
594
594
594
593
593
593
593
595
595
595
596
596
596
596
596
596
91.9
92.2
92.5
92.8
93.1
93.9
94.1
94.3
94.5
95,1
95,3
95,5
94,5
94,7
94,9
96,2
96,4
96,6
93.4
93.6
93.8
94.2
94.4
94.8
95.0
95.2
95.4
95,6
95,8
96
95,5
95,7
95,9
96,5
96,7
96,9
93.4
93.6
93.8
94.2
94.4
94.8
95.0
95.2
95.4
95,5
95,7
95,9
95,7
95,9
96,1
96,5
96,7
96,9
0.51
0.51
0.51
0.51
0.51
0.48
0.48
0.48
0.48
0,67
0,67
0,67
0,65
0,65
0,65
0,76
0,76
0,76
0.64
0.64
0.64
0.64
0.64
0.60
0.60
0.60
0.60
0,76
0,76
0,76
0,75
0,75
0,75
0,83
0,83
0,83
0.71
0.71
0.71
0.71
0.71
0.67
0.67
0.67
0.67
0,8
0,8
0,8
0,8
0,8
0,8
0,85
0,85
0,85
27.6
31.3
38.6
45.7
53.8
65.6
72.0
80.5
86.9
81,7
90,6
101,3
114,2
128,4
144,4
152,3
168,8
188,7
685
778
962
1140
1350
2610
2870
3220
3470
2529
2810
3148
4292
4837
5450
6747
7496
8396
High-Output Design
132 175 315L/A/B
150 200 315L/A/B
150 200 315L/A/B
185 250 315L/A/B
220 300 315L/A/B
330 450 355C/D/E
515 700 355C/D/E*
560 750 355C/D/E*
660 900
450
900 1250
450
900 1250
450*
1640
1430
1610
1520
1570
2670
2763
3000
5573
5423
6100
75
79
77
79
79
81
86
83
82
90
82
888
1782
1181
1782
1782
1189
3574
1788
895
3588
894
92.2
92.4
92.8
93.4
93.7
94.4
94.5
94.9
95.6
95.2
96.0
92.7
93.6
93.1
94.0
94.4
94.9
95.3
95.6
95.9
96.0
96.3
92.7
93.6
93.0
94.0
94.5
95.0
95.4
95.7
95.9
96.2
96.3
0.58
0.74
0.71
0.74
0.74
0.67
0.83
0.74
0.69
0.84
0.70
0.69
0.82
0.80
0.82
0.82
0.77
0.88
0.82
0.79
0.89
0.79
0.76
0.85
0.83
0.85
0.86
0.81
0.89
0.85
0.82
0.90
0.82
26.0
26.2
27.0
32.1
37.6
59.5
84.2
95.5
116
144
158
163
52
126
65
87
316
48
330
1480
62
2030
NOTA
Carcaça
145
82.0
124
101
120
270
140
305
718
244
981
5.8
6.0
6.0
6.1
6.0
6.0
6.6
6.9
5.8
7.5
6.0
1.2
1.4
1.6
1.4
1.4
1.2
1
1.5
0.8
0.7
0.8
2.5
2.1
2.2
2.1
2.4
2.3
2.2
2.6
2.2
2.3
2.2
7.84
3.25
7.28
4.00
4.44
13.8
6.90
14.3
54.7
25.2
65.4
12
15
14
15
15
18
20
20
30
20
30
26
33
31
33
33
40
44
44
66
44
66
Peso
(kg)
Nível médio
de pressão
RPM
sonora
dB(A)
4160 V
% da potência nominal
Conjugado Corrente Conjugado
Tempo
Conjugado Momento
Nominal com rotor com rotor
máximo com
máximo de Inercia
bloqueado bloqueado
Cn
rotor
Cmáx/Cn J (kgm2)
kW
cv
Il/In
(kgfm)
Cp/Cn
Quente Frio
XII Pólos - 600 RPM - 60HZ
132 175 400L/A/B
216
5.5
1.1
2.3
18.5
25
55
150 200 400L/A/B
246
5.5
1.1
2.3
21.2
25
55
185 250 400L/A/B
303
5.5
1.1
2.3
23.8
25
55
220 300 400L/A/B
361
5.5
1.1
2.3
29.8
25
55
260 350 400L/A/B
426
5.5
1.1
2.3
33.1
25
55
300 400
450
493
5.5
1
2
37.7
50
110
330 450
450
542
5.5
1
2
42.5
50
110
370 500
450
608
5.5
1
2
47.8
50
110
400 550
450
657
5.5
1
2
53.9
50
110
450 600
500L
736,63866
5,5
0,7
1,7
90,76
47
103
500 700
500L
818,48739
5,5
0,7
1,7
100,84
47
103
560 750
500C
916,70588
5,5
0,7
1,7
112,94
47
103
630 850
560L
1029,5638
5,5
1,1
1,9
200,58
39
85,8
710 950
560L
1160,302
5,5
1,1
1,9
226,06
39
85,8
800 1100
560A
1307,3826
5,5
1,1
1,9
254,71
39
85,8
900 1250
630L
1470,8054
5,5
0,9
1,9
366,08
48
106
1000 1350
630L
1634,2282
5,5
0,9
1,9
406,76
48
106
1120 1500
630C
1830,3356
5,5
0,9
1,9
455,57
48
106
Potência
Inércia
Corrente máxima da
Rendimento ƞ
Fator de potência (Cos φ) nominal
carga
50 75 100 50 75 100 In (A) (kgm2) (1)
1) Para carga com torque parabólico
Conjugado Corrente Conjugado
Tempo
Conjugado Momento
Nominal com rotor com rotor
máximo com
máximo de Inercia
Cn
bloqueado bloqueado
rotor
Cmáx/Cn J (kgm2)
kW
cv
(kgfm)
Il/In
Cp/Cn
Quente Frio
II Pólos - 3600 RPM - 60HZ
220 300 315C/D/E
60.0
5.8
1
2.3
3.40
18
40
260 350 315C/D/E
70.9
6.0
1
2.3
3.70
18
40
300 400 315C/D/E
81.7
6.6
1.1
2.3
3.90
15
33
330 450 355C/D/E
89.9
6.3
1
2.3
5.60
22
48
370 500 355C/D/E
101
6.3
1
2.3
5.90
22
48
400 550 355C/D/E
109
6.6
1
2.3
6.40
22
48
440 600 355C/D/E
120
6.6
1
2.3
6.40
20
44
480 650 400L/A/B
131
6.3
1.2
2.5
10.3
20
44
515 700 400L/A/B
140
6.5
1.3
2.5
10.3
20
44
560 750 400C/D/E
152
6.5
1.3
2.5
11.2
20
44
590 800 400C/D/E
161
6.7
1.3
2.5
12.0
20
44
630 850 400C/D/E
171
6.7
1.3
2.5
12.9
20
44
660 900 400C/D/E
180
6.7
1.3
2.5
13.7
20
44
700 950 400C/D/E
190
6.8
1.4
2.5
14.5
20
44
750 1000 400C/D/E
204
7.2
1.4
2.5
14.5
20
44
800 1100
450
217
7.5
0.7
2.3
23.8
12
26
900 1250
450
244
7.5
0.7
2.3
25.2
12
26
1000 1350
450
271
7.5
0.7
2.6
25.2
12
26
1100 1500
450*
299
8.0
0.7
2.6
25.2
12
26
Potência
Carcaça
IV Pólos - 1800 RPM - 60HZ
150 200 315C/D/E
81.8
185 250 315C/D/E
101
220 300 315C/D/E
120
260 350 315C/D/E
142
300 400 315C/D/E
164
330 450 315C/D/E
180
370 500 355C/D/E
202
400 550 355C/D/E
218
440 600 355C/D/E
240
480 650 355C/D/E
261
515 700 400L/A/B
280
560 750 400L/A/B
305
590 800 400C/D/E
321
630 850 400C/D/E
343
660 900 400C/D/E
359
700 950 400C/D/E
381
750 1000 400C/D/E
408
810 1100 400C/D/E
441
900 1250
450
489
1000 1350
450
544
1100 1500
450
598
1250 1700
450
680
1400 1900
500L
760,9375
1600 2200
500L
869,64286
1800 2500
500C
978,34821
2000 2700
560L
1085,2368
2250 3000
560B
1220,8914
2500 3400
630L
1356,546
2800 3800
630L
1519,3315
3150 4300
630C
1709,2479
6.8
6.8
6.8
6.8
6.8
7.0
6.8
6.8
6.8
6.8
6.6
6.6
6.6
6.6
7.0
6.6
6.6
7.0
6.5
6.5
6.5
6.5
6,1
6,1
6,1
6,9
6,9
6,7
6,7
6,7
1.4
1.4
1.4
1.4
1.4
1.6
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
0.8
0.8
0.8
0.8
0,7
0,7
0,7
0,6
0,6
0,7
0,7
0,7
2.5
2.5
2.5
2.5
2.5
2.7
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2,4
2,4
2,4
2,5
2,5
2,5
2,5
2,5
4.44
4.44
4.77
5.42
6.61
7.15
10.7
11.6
12.5
13.4
19.6
21.1
22.5
24.0
24.0
25.5
26.9
28.4
23.5
24.9
28.0
29.4
39,78
45,46
51,14
83,69
94,15
209,41
234,54
263,86
14
14
14
14
14
12
18
18
18
20
18
18
18
18
18
18
18
18
20
20
20
20
24
24
24
38
38
29
29
29
31
31
31
31
31
26
40
40
40
44
40
40
40
40
40
40
40
40
44
44
44
44
52,8
52,8
52,8
83,6
83,6
63,8
63,8
63,8
Peso
(kg)
Nível médio
de pressão
RPM
sonora
dB(A)
6600 V
% da potência nominal
Inércia
Corrente máxima da
Rendimento ƞ
Fator de potência (Cos φ) nominal
carga
50 75 100 50 75 100 In (A) (kgm2) (1)
1730
1770
1810
2540
2590
2670
2670
3400
3400
4040
4130
4230
4330
4440
4440
5273
5425
5425
5425
79
79
79
86
86
86
86
89
89
89
89
89
89
89
89
90
90
90
90
3574
3574
3576
3576
3576
3577
3577
3580
3580
3580
3580
3580
3581
3581
3581
3587
3588
3588
3588
93.0
93.5
93.7
93.5
93.6
93.9
94.0
94.0
94.3
94.6
94.8
94.9
95.0
95.1
95.3
94.7
94.9
95.1
95.2
94.0
94.4
94.7
94.9
95.0
95.1
95.2
95.0
95.3
95.5
95.6
95.8
95.9
96.0
96.1
95.7
95.9
96.1
96.2
94.2
94.6
94.9
95.1
95.2
95.3
95.4
95.3
95.5
95.7
95.8
95.9
96.0
96.1
96.2
96.0
96.2
96.4
96.5
0.80
0.80
0.78
0.83
0.83
0.83
0.81
0.80
0.80
0.80
0.80
0.80
0.80
0.80
0.80
0.83
0.83
0.83
0.83
0.86
0.86
0.85
0.87
0.87
0.87
0.87
0.85
0.85
0.85
0.86
0.86
0.86
0.86
0.86
0.89
0.89
0.89
0.89
0.88
0.88
0.87
0.89
0.89
0.89
0.89
0.87
0.87
0.87
0.88
0.88
0.88
0.88
0.88
0.90
0.90
0.90
0.90
23.2
27.3
31.8
34.1
38.2
41.3
45.3
50.6
54.2
58.8
61.2
65.3
68.3
72.4
77.5
81.0
90.9
101
111
19
23
23
35
40
43
43
53
61
66
69
74
77
86
93
23
27
42
49
1650
1650
1690
1770
1910
1980
2670
2740
2820
2880
3565
3600
4230
4330
4330
4440
4540
4640
5275
5425
5725
5875
6595
7075
7560
9540
10190
11925
12600
13385
79
79
79
79
79
79
83
83
83
83
83
83
83
83
83
83
83
83
90
90
90
90
90
90
90
90
90
90
90
90
1786
1786
1786
1786
1786
1786
1788
1788
1788
1788
1790
1790
1790
1790
1790
1790
1790
1790
1791
1791
1791
1791
1792
1792
1792
1795
1795
1795
1795
1795
91.5
92.5
93.0
93.6
94.1
94.0
94.1
94.3
94.6
94.7
94.8
94.9
95.0
95.1
95.3
95.3
95.4
95.5
95.0
95.3
95.5
95.7
96,5
96,6
96,7
96,2
96,3
95,8
95,9
96
93.0
93.5
94.0
94.5
94.7
94.8
95.0
95.2
95.4
95.5
95.6
95.7
95.9
96.0
96.1
96.1
96.2
96.4
96.0
96.1
96.2
96.3
97,1
97,2
97,3
96,9
97
96,7
96,8
96,9
93.2
93.7
94.1
94.6
94.7
94.9
95.1
95.3
95.5
95.6
95.7
95.8
96.0
96.0
96.1
96.1
96.2
96.4
96.2
96.3
96.4
96.5
97,2
97,3
97,4
97,2
97,3
97
97,1
97,2
0.67
0.68
0.69
0.71
0.73
0.70
0.71
0.71
0.72
0.72
0.72
0.72
0.72
0.73
0.75
0.75
0.75
0.75
0.77
0.77
0.77
0.77
0,84
0,84
0,84
0,84
0,84
0,84
0,84
0,84
0.78
0.79
0.79
0.81
0.82
0.80
0.81
0.81
0.82
0.82
0.81
0.81
0.81
0.81
0.82
0.82
0.82
0.82
0.84
0.84
0.84
0.84
0,89
0,89
0,89
0,89
0,89
0,89
0,89
0,89
0.83
0.84
0.84
0.85
0.85
0.83
0.85
0.85
0.86
0.86
0.85
0.85
0.85
0.85
0.86
0.86
0.86
0.86
0.87
0.87
0.87
0.87
0,9
0,9
0,9
0,9
0,9
0,9
0,9
0,9
17.0
20.6
24.3
28.3
32.6
36.6
40.0
43.2
46.9
51.1
55.4
60.2
63.2
67.5
69.9
74.1
79.3
85.5
94.1
104
115
130
140
159,8
179,6
200
224,8
250,5
280,3
315
56
70
84
99
114
123
187
202
223
272
255
277
292
312
328
348
373
403
380
423
465
531
684
781
879
1541
1734
1544
1729
1945
6600 V
% da potência nominal
Tempo
Conjugado Corrente Conjugado
Conjugado Momento
Nominal com rotor com rotor
máximo com
máximo de Inercia
Cn
rotor
bloqueado bloqueado
Cmáx/Cn J (kgm2)
kW
cv
(kgfm)
Il/In
Cp/Cn
Quente Frio
VI Pólos - 1200 RPM - 60HZ
150 200 315C/D/E
123
5.5
1.2
2.3
4.60
20
44
185 250 315C/D/E
152
5.5
1.2
2.3
5.25
20
44
220 300 315C/D/E
181
5.8
1.3
2.5
6.78
20
44
260 350 315C/D/E
214
5.8
1.3
2.5
7.33
15
33
300 400 355C/D/E
246
5.9
1.2
2.5
13.8
15
33
330 450 355C/D/E
270
5.9
1.2
2.5
15.0
15
33
370 500 355C/D/E
303
5.9
1.2
2.5
17.3
15
33
400 550 355C/D/E
327
6.0
1.2
2.5
18.4
12
26
440 600 400L/A/B
360
6.2
1.2
2.5
18.2
20
44
480 650 400L/A/B
393
6.2
1.2
2.5
19.7
20
44
515 700 400L/A/B
422
6.2
1.2
2.5
21.2
20
44
560 750 400C/D/E
458
6.2
1.2
2.5
22.3
20
44
590 800 400C/D/E
483
6.2
1.2
2.5
24.2
20
44
630 850 400C/D/E
516
6.2
1.2
2.5
25.7
20
44
660 900 400C/D/E
540
6.2
1.2
2.5
27.2
20
44
700 950 400C/D/E
573
6.5
1.3
2.6
28.7
17
37
750 1000 400C/D/E
614
6.8
1.4
2.7
30.8
15
33
800 1100
450
653
6.1
0.9
2.5
37.8
19
42
900 1250
450
735
6.1
0.9
2.5
42.4
19
42
1000 1350
450
816
6.1
1
2.7
44.7
19
42
1250 1700
500L
1019,6817
6
1
2,4
82,48
18
39,6
1400 1900
500B
1142,0436
6
1
2,4
92,38
18
39,6
1600 2200
560L
1304,1004
5,5
0,8
2,1
110,25
28
61,6
1800 2500
560L
1467,113
5,5
0,8
2,1
124,03
28
61,6
2000 2700
560B
1630,1255
5,5
0,8
2,1
137,81
28
61,6
2250 3000
630C
1833,8912
5,6
1
2,2
259,09
19
41,8
1665
1750
1935
2040
2670
2740
2900
2980
3400
3500
3600
4230
4330
4440
4540
4640
4790
5425
5725
5875
6980
7435
8440
8950
9460
12710
77
77
77
77
81
81
81
81
81
81
81
81
81
81
81
81
81
88
88
88
88
88
90
90
90
90
1184
1184
1184
1184
1190
1190
1190
1190
1190
1190
1190
1190
1190
1190
1190
1190
1190
1193
1193
1194
1194
1194
1195
1195
1195
1195
92.7
93.1
93.4
93.5
94.3
94.3
94.7
94.6
94.8
94.8
94.9
95.0
95.2
95.3
95.4
95.4
95.5
95.8
96.0
96.0
96,4
96,6
96,8
97
97,2
97
93.0
93.5
93.8
94.0
94.7
94.9
95.0
95.1
95.3
95.3
95.4
95.5
95.6
95.7
95.8
95.8
95.9
96.3
96.4
96.5
96,9
97,1
97,2
97,4
97,6
97,5
93.0
93.5
93.8
93.9
94.7
94.9
95.0
95.1
95.4
95.4
95.5
95.6
95.7
95.8
95.9
95.9
96.0
96.3
96.4
96.5
97
97,2
97,2
97,4
97,6
97,6
0.64
0.64
0.64
0.64
0.64
0.64
0.64
0.63
0.71
0.71
0.71
0.71
0.71
0.71
0.71
0.70
0.69
0.77
0.78
0.77
0,76
0,76
0,82
0,82
0,82
0,8
0.75
0.75
0.75
0.75
0.75
0.75
0.75
0.74
0.80
0.80
0.80
0.80
0.80
0.80
0.80
0.79
0.79
0.83
0.84
0.83
0,83
0,83
0,87
0,87
0,87
0,86
0.80
0.80
0.80
0.80
0.81
0.81
0.81
0.80
0.84
0.84
0.84
0.84
0.84
0.84
0.84
0.83
0.83
0.87
0.87
0.86
0,86
0,86
0,88
0,88
0,88
0,88
17.6
21.6
25.6
30.3
34.2
37.6
42.1
46.0
48.0
52.4
56.2
61.0
64.2
68.5
71.7
76.9
82.3
83.5
93.9
105
131,1
146,5
163,6
183,7
203,7
229,2
163
202
270
238
256
282
316
270
510
557
597
650
684
731
765
741
749
765
861
1090
1187
1329
1843
2074
2304
2054
VIII Pólos - 900 RPM - 60HZ
150 200 355L/A/B
164
185 250 355C/D/E
202
220 300 355C/D/E
240
260 350 355C/D/E
284
300 400 355C/D/E
328
330 450 400L/A/B
362
370 500 400L/A/B
405
400 550 400C/D/E
438
440 600 400C/D/E
482
480 650 400C/D/E
525
515 700 400C/D/E
562
560 750 400C/D/E
611
590 800 400C/D/E*
644
630 850
450
686
660 900
450
718
700 950
450
762
750 1000
450
816
800 1100
450
871
900 1250
500L
979,44134
1000 1350
500C
1088,2682
1120 1500
560L
1217,5
1250 1700
560L
1358,817
1400 1900
560B
1521,875
1600 2200
630L
1741,2291
1800 2500
630L
1958,8827
2000 2700
630C
2176,5363
5.6
5.6
5.7
5.6
5.6
5.7
5.7
5.7
5.7
6.0
6.3
6.3
6.3
5.5
5.5
5.5
5.5
5.9
5,5
5,5
5,5
5,5
5,5
5,5
5,5
5,5
1.2
1.2
1.2
1.2
1.2
1.1
1.1
1.1
1.1
1.1
1.1
1.1
1.1
0.8
0.8
0.8
0.8
0.9
0,8
0,8
1
1
1
1
1
1
2.2
2.2
2.2
2.2
2.2
2.3
2.3
2.3
2.3
2.3
2.3
2.3
2.3
2.2
2.2
2.2
2.2
2.4
2
2
2
2
2
1,8
1,8
1,8
10.2
12.3
15.2
16.4
17.5
32.7
35.0
37.3
39.7
41.9
44.3
47.5
47.5
54.8
58.0
61.1
65.4
65.4
111,97
124,41
209,14
233,41
261,42
341,13
383,77
426,41
20
20
20
20
20
19
19
19
19
19
19
19
19
27
27
27
27
23
36
36
24
24
24
23
23
23
44
44
44
44
44
42
42
42
42
42
42
42
42
59
59
59
59
51
79,2
79,2
52,8
52,8
52,8
50,6
50,6
50,6
2100
2540
2740
2820
2900
3600
3700
4330
4440
4540
4640
4790
4790
5575
5723
5873
6085
6085
7265
7715
8500
8985
9540
11785
12470
13155
79
79
79
79
79
79
79
79
79
79
79
79
79
82
82
82
82
82
85
85
85
85
85
85
85
85
891
891
891
891
891
889
890
890
890
890
892
892
892
895
895
895
895
895
895
895
896
896
896
895
895
895
92.9
93.3
93.5
94.0
94.1
94.3
94.5
94.6
94.7
94.8
94.9
95.0
95.1
95.0
95.1
95.2
95.2
95.3
95,9
96,1
95,5
95,7
95,9
96,3
96,5
96,7
93.4
93.9
94.1
94.3
94.4
94.8
95.0
95.1
95.2
95.3
95.4
95.5
95.6
95.8
95.9
96.0
96.0
96.1
96,5
96,7
96,3
96,5
96,7
96,8
97
97,2
93.5
94.0
94.2
94.4
94.5
94.8
95.0
95.1
95.2
95.3
95.4
95.5
95.6
95.9
96.0
96.1
96.1
96.2
96,5
96,7
96,5
96,7
96,9
96,8
97
97,2
0.62
0.62
0.62
0.62
0.60
0.70
0.70
0.70
0.70
0.70
0.68
0.68
0.68
0.67
0.68
0.68
0.68
0.68
0,72
0,72
0,74
0,74
0,74
0,81
0,81
0,81
0.73
0.73
0.73
0.73
0.71
0.79
0.79
0.79
0.80
0.80
0.78
0.78
0.78
0.77
0.78
0.78
0.78
0.78
0,81
0,81
0,81
0,81
0,81
0,85
0,85
0,85
0.78
0.78
0.78
0.78
0.76
0.82
0.82
0.82
0.82
0.82
0.81
0.81
0.81
0.81
0.82
0.82
0.82
0.82
0,83
0,83
0,83
0,83
0,83
0,86
0,86
0,86
18.0
22.1
26.2
30.9
36.5
37.1
41.5
44.9
49.3
53.7
58.3
63.3
66.7
70.9
73.3
77.7
83.3
88.7
98,3
109
122,3
136,2
152,3
168,1
188,8
209,3
274
338
401
476
551
564
632
684
754
824
880
958
1010
1260
1320
1400
1500
1590
2244
2493
2077
2319
2597
2549
2867
3186
High-Output Design
330 450 315C/D/E*
440 600 355C/D/E*
515 700 355C/D/E*
590 800
450
6.6
6.3
6.8
5.5
1.1
1.3
1.5
0.8
2.3
2.7
2.5
2.2
4.10
18.4
13.4
51.7
12
12
20
27
26
26
44
59
1850
2980
2880
5425
79
81
83
82
3576
1190
1788
895
94.0
94.5
94.9
95.0
94.9
95.1
95.5
95.7
95.0
95.1
95.6
95.8
0.78
0.61
0.73
0.67
0.85
0.72
0.83
0.77
0.87
0.79
0.86
0.81
34.9
51.2
54.8
66.5
19
335
292
1180
Potência
NOTA
Carcaça
89.9
360
281
642
1) Para carga com torque parabólico
Peso
(kg)
Nível médio
de pressão
RPM
sonora
dB(A)
Inércia
Corrente máxima da
Rendimento ƞ
Fator de potência (Cos φ) nominal
carga
50 75 100 50 75 100 In (A) (kgm2) (1)
Motor dimensions - Rolling Bearings and Vertical Normal Thrust
Frames HGF 315L/A/B to 400C/D/E (NEMA 5006/7/8T to 6806/7/8T)
Frame
A
AA
AB
AC
AD**
AE
B
BA
BC
BB
BD
C
508
315L/A/B
IEC - Dimensions in mm
260
560
508
180
628
675
705
405
315C/D/E
630
710
770
180
68
340
800
216
1050
900
630
355L/A/B
1000
710
610
230
750
765
735
430
355C/D/E
800
900
200
380
254
1300
1000
1120
80
710
400L/A/B
360
800
686
218
840
875
775
470
400C/D/E
900
1000
1070
220
280
415
1120
1425
1250
D
E
ES
F
G
GD
65*
140
125
N
18
58
11
90
170
140
25
81
14
65*
140
125
18
58
11
90
170
140
25
81
14
65*
140
125
18
58
11
100
210
170
65*
140
125
100
210
170
28
90
16
70*
140
125
20
62,5
12
110
210
170
28
100
16
70*
140
125
20
62,5
12
110
210
170
28
100
16
F
G
GD
5
28
90
16
18
58
11
BEARINGS
HGF API 541
HGF
Frame
H
HA.
HC
HD**
K
K´
L
CH
d1
s1
s2
DE
NDE
DE
NDE
6314
6314
6314
6314
1570
M20
1600
M24
6320
6316
6320
6320
1870
M20
6314
6314
6314
6314
M24
6320
6316
6320
6320
6314
6314
6314
6314
6322
6320
6322
6322
6314
6314
6314
6314
6322
6320
6322
6322
315L/A/B
47,5
655
885
38
1900
125
28
1775
M20
1845
M24
2075
M20
2145
M24
2105
M20
6315
6315
6315
6315
M24
NU224
6320
6324
6324
355L/A/B
740
355
950
3xRP(RWG)3/4"
315C/D/E
48
355C/D/E
2xRP(RWG)3"
IEC - Dimensions in mm
315
50
400L/A/B
2175
400
840
1035
36
130
56
2405
M20
6315
6315
6315
6315
2475
M24
NU224
6320
6324
6324
400C/D/E
* 2 poles
Frame
A
AA
AB
AC
AD**
AE
B
BA
BC
BB
BD
C
20,000
5006/7/8T (TS*)
22,000
NEMA - Dimensions in inches
20,000 7,087 24,725 26,575 27,756 15,945
5009/10/11T
(TS*)
25,000
28,000
10,237
30,315
13,386
41,339
7,087
32,000
2,677
8,500
36,000
25,000
5807/8/9T (TS*)
39,370
28,000
23,000 9,055 29,528 30,118 28,937 16,929
5810/11/12T
(TS*)
32,000
36,000
7,874
14,961
10,000
51,181
40,000
45,000
3,150
28,000
6806/7/8T (TS*)
14,173
32,000
27,000 8,583 33,071 34,449 30,512 18,504
6809/10/11T
(TS*)
36,000
40,000
42,126
11,500
8,661
16,338
45,000
56,102
50,000
D
E
ES
2.375*
4,75*
4,33*
3,625
10,625
9,055
0,875 3,134 0,875
4,75*
4,33*
0,625* 2,021* 0,625*
3,625
10,625
9,055
0,875 3,134 0,875
2.375*
4,75*
4,33*
0,625* 2,021* 0,625*
3,875
11,625
9,842
2.375*
4,75*
4,33*
HA.
HC
HD**
K
K´
5006/7/8TS
CH
d1
s1
s2
11,625
9,842
1,000 3,309 1,000
5,75*
4,33*
0,625* 2,402* 0,625*
4,375
11,625
9,842
1,000 3,817 1,000
2.750*
5,75*
4,33*
0,625* 2,402* 0,625*
4,375
11,625
9,842
1,000 3,817 1,000
HGF API 541
DE
NDE
DE
NDE
6314
6314
6314
6314
6320
UNC 3/4"
66,924
UNC 7/8"
6320
6316
6320
72,860
UNC 3/4"
6314
6314
6314
6314
UNC 7/8"
6320
6316
6320
6320
6314
6314
6314
6314
6322
6320
6322
6322
1,575
12,500 1,968 25,886 34,941
5009/10/11TS
5009/10/11T
78,735
1,181
4,921
69,120
UNC 3/4"
5807/8/9T
75,995
UNC 7/8"
5810/11/12TS
80,931
UNC 3/4"
6314
6314
6314
6314
5810/11/12T
87,806
UNC 7/8"
6322
6320
6322
6322
6806/7/8TS
83,589
UNC 3/4"
6315
6315
6315
6315
UNC 1"
NU224
6320
6324
6324
95,400
UNC 3/4"
6315
6315
6315
6315
101,275
UNC 1"
NU224
6320
6324
6324
1,968
89,464
6806/7/8T
17,000 3,220 34,323 42,000
6809/10/11TS
6809/10/11T
* 2 poles
1,417
2,205
3xNPT3/4"
5807/8/9TS
14,500 2,492 29,657 37,925
1,000 3,309 1,000
0,625* 2,021* 0,625*
3,875
61,049
2xNPT3"
NEMA - Dimensions in inches
5006/7/8T
L
0,197
2.750*
BEARINGS
H
0,625* 2,021* 0,625*
2.375*
HGF
Frame
N
5,118
Flange, fan cover with noise supressor and steel terminal boxes dimensions – horizontal
and vertical normal thrust machines
Frames HGF 315L/A/B to 400C/D/E (NEMA 5006/7/8T to 6806/7/8T)
Steel fan cover
With noise supressor L'
400L/A/B
400C/D/E
5006/7/8T
5009/10/11T
5807/8/9T
5810/11/12T
6806/7/8T
6809/10/11T
780
745
890
845
24,73 26,279
29,53 29,854
33,07 34,520
>=6
1645
1705
Steel Terminal boxes
Polaridade
4
2
4
>=6
1610
1535
1945
2005
1910
1835
1880
1990
1850
1760
2180
2290
2150
2060
2165
2370
2360
-
2070
2110
2465
2670
2660
-
2370
2410
64,002
71,063
62,624
64,370
75,813
82,866
74,435
76,173
73,254
81,705
72,073
72,650
85,065
93,516
83,884
84,461
85,754
97,142
96,747
-
85,331
87,102
97,565
108,953
108,559
-
97,142
98,913
Frame
315L/A/B
315C/D/E
355L/A/B
355C/D/E
400L/A/B
400C/D/E
5006/7/8T
5009/10/11T
5807/8/9T
5810/11/12T
6806/7/8T
6809/10/11T
AD'A
HD'A
AD'B
HD'B
AD'C
HD'C
AD'D
HD'D
AD'E
HD'E
-
-
925
985
970
1020
990
1300
1225
1365
-
-
955
1050
1005
1085
1025
1375
1255
1430
-
-
995
1135
1045
1170
1065
1450
1295
1515
33,346
36,220
36,417
38,878
38,386
40,256
38,976
51,280
48,228
53,839
34,488
39,370
37,598
41,862
39,567
43,240
40,354
54,657
49,409
56,823
36,024
43,307
39,173
45,937
41,142
47,315
41,929
58,339
50,984
60,898
Flange
C
ØM
ØN
ØP
ØS
T
No.Furos
FF-600
216
600
550
660
24
FF-740
254
740
680
800
24
6
8
FF-940
280
940
880
1000
28
D 558
8.5
22,000
18,000
24,000
1,000
D 762
10,000
30,000
28,000
32,000
1,000
0.250
D 895
11,500
35,250
33,250
37,250
1,000
8 (vertical origin)
355C/D/E
665
2
IEC - Dimensions in
mm
355L/A/B
700
Without noise supressor L'
Polaridade
NEMA - Dimensions
in inches
315C/D/E
HC
Flange
Frame
IEC - Dimensions in
mm
315L/A/B
AC
315L/A/B
NEMA - Dimensions
in inches
NEMA - Dimensions
in inches
IEC - Dimensions in
mm
Frame
5006/7/8T
315C/D/E
355L/A/B
355C/D/E
400L/A/B
400C/D/E
5009/10/11T
5807/8/9T
5810/11/12T
6806/7/8T
6809/10/11T
Toleraces as per NEMA MG1-2009 Standard Part4, Page 33
Motor dimensions - Sleeve Bearings
Frames HGF 315L/A/B to 400C/D/E (NEMA 5006/7/8T to 6806/7/8T)
Frame
A
AA
AB
AC
AD**
AE
B
405
508
560
630
315L/A/B
IEC - Dimensions in mm
508
180
628
675
705
BA
355L/A/B
610
230
750
765
735
430
630
710
800
BB
770
180
710
800
900
315C/D/E
BC
260
68
340
400L/A/B
686
218
840
875
775
470
710
800
900
200
C**
375
D
E
ES
F
G
65*
140
125
N
18
58
GD
11
90
170
140
25
81
14
425**
65*
140
125
18
58
11
90
170
140
25
81
14
1050
65*
140
125
18
58
11
100
210
170
28
90
380
425
16
65*
140
125
18
58
11
100
210
170
28
90
16
475**
70*
140
125
20
62,5
12
500**
110
210
170
28
100
16
450**
5
1300
80
360
1070
220
1000
1120
1250
400C/D/E
C
1000
900
1000
1120
355C/D/E
BD
450
415
475**
70*
140
125
20
62,5
12
500**
110
210
170
28
100
16
1425
Sleeve Bearings
HGF
Frame
H
HA.
HC
HD**
K
K´
L
L**
d1
1895
1980**
s1
s2
HGF API 541
DE
NDE
DE
NDE
M20
FNLB 9-80 IP55
FNLQ 9-80 IP55
FNLB 9-80 IP55
FNLB 9-80 IP55
315L/A/B
47,5
655
885
2195
2065**
M24
FNLB 9-90 IP55
FNLQ 9-90 IP55
FNLB 9-90 IP55
FNLB 9-90 IP55
1830
2280**
M20
FNLB 9-80 IP55
FNLQ 9-80 IP55
FNLB 9-80 IP55
FNLB 9-80 IP55
2130
2365**
M24
FNLB 9-90 IP55
FNLQ 9-90 IP55
FNLB 9-90 IP55
FNLB 9-90 IP55
2135
2190**
M20
FNLB 9-80 IP55
FNLQ 9-80 IP55
FNLB 9-80 IP55
FNLB 9-80 IP55
2070
2335**
M24
FNLB 9-100 IP55
FNLQ 9-100 IP55
FNLB 9-100 IP55
FNLB 9-100 IP55
2435
2490**
M20
2370
2635**
M24
2450
2475**
M20
2390
2775**
M24
38
355
740
950
48
355C/D/E
FNLB 9-80 IP55
FNLQ 9-80 IP55
FNLB 9-80 IP55
FNLB 9-80 IP55
Frame
FNLB 9-100 IP55
FNLQ 9-100 IP55
FNLB 9-100 IP55
FNLB 9-100 IP55
FNLB 9-80 IP55
FNLQ 9-80 IP55
FNLB 9-80 IP55
FNLB 9-80 IP55
315L/A/B
315C/D/E
355L/A/B
355C/D/E
400L/A/B
400C/D/E
50
400L/A/B
400
840
1035
36
IEC
355L/A/B
3xRP(RWG)3/4"
28
2xRP(RWG)3"
IEC - Dimensions in mm
315
315C/D/E
FNLB 11-110 IP55 FNLQ 11-110 IP55 FNLB 11-110 IP55 FNLB 11-110 IP55
56
2750
2775**
M20
2690
3075**
M24
AE
B
BA
15,945
20,000
22,000
25,000
FNLB 9-80 IP55
FNLQ 9-80 IP55
FNLB 9-80 IP55
Fan cover with noise supressor
dimensions
HGF
HGF API 541
Poles
Poles
2
>=4
2
4
1930
2015 1980
2065
2230
2315 2380
2365
2165
2310 2190
2335
2465
2610 2490
2635
2450
2725 2475
2775
2750
3025 2775
3075
FNLB 9-80 IP55
400C/D/E
FNLB 11-110 IP55 FNLQ 11-110 IP55 FNLB 11-110 IP55 FNLB 11-110 IP55
* 2 poles
** HGF API 541
Frame
5006/7/8TS
A
AA
AB
AC
AD**
NEMA - Dimensions in inches
5006/7/8T
20,000
7,087
24,725
26,575
27,756
5009/10/11TS
5807/8/9TS
5807/8/9T
23,000
9,055
29,528
30,118
28,937
16,929
5810/11/12TS
25,000
28,000
32,000
BB
30,315
7,087
28,000
32,000
36,000
5009/10/11T
BC
10,237
13,386
6806/7/8TS
6806/7/8T
27,000
8,583
33,071
34,449
30,512
18,504
6809/10/11TS
28,000
32,000
36,000
C**
2,677
14,763
16.732**
D
2.375*
E
4,750
ES
4,330
N
F
0,625
G
2,021
GD
0,625
0,875
3,625
10,625
9,055
0,875
3,134
2.375*
4,750
4,330
0,625
2,021
0,625
3,625
10,625
9,055
0,875
3,134
0,875
41,339
14,961
2.375*
4,750
4,330
3,875
11,625
9,842
17.716**
16,732
0,625
2,021
0,625
1,000
3,309
1,000
0,197
2.375*
4,750
4,330
0,625
2,021
0,625
3,875
11,625
9,842
1,000
3,309
1,000
51,181
3,150
14,173
18,701**
2.750*
5,750
4,330
0,625
2,402
0,625
19,685**
4,375
11,625
9,842
1,000
3,817
1,000
18,701**
2.750*
5,750
4,330
0,625
2,402
0,625
19,685**
4,375
11,625
9,842
1,000
3,817
1,000
42,126
17,716
8,661
40,000
45,000
50,000
6809/10/11T
C
39,370
7,874
36,000
40,000
45,000
5810/11/12T
BD
16,338
56,102
Sleeve Bearings
HGF
Frame
H
HA.
HC
HD**
K
K´
5006/7/8TS
5006/7/8T
12,500
1,968
25,886
L**
d1
s1
s2
HGF API 541
DE
NDE
DE
NDE
FNLB 9-80 IP55
FNLQ 9-80 IP55
FNLB 9-80 IP55
FNLB 9-80 IP55
73,844
77,191** UNC 3/4"
85,655
85.231** UNC 7/8"
FNLB 9-90 IP55
FNLQ 9-90 IP55
FNLB 9-90 IP55
FNLB 9-90 IP55
75,980
89,002** UNC 3/4"
FNLB 9-80 IP55
FNLQ 9-80 IP55
FNLB 9-80 IP55
FNLB 9-80 IP55
1,575
34,941
5009/10/11TS
87,790
97,042** UNC 7/8"
FNLB 9-90 IP55
FNLQ 9-90 IP55
FNLB 9-90 IP55
FNLB 9-90 IP55
5807/8/9TS
83,293
85,459** UNC 3/4"
FNLB 9-80 IP55
FNLQ 9-80 IP55
FNLB 9-80 IP55
FNLB 9-80 IP55
5807/8/9T
84,853
95,286** UNC 7/8"
FNLB 9-100 IP55
FNLQ 9-100 IP55
FNLB 9-100 IP55
FNLB 9-100 IP55
95,104
97,270** UNC 3/4"
FNLB 9-80 IP55
FNLQ 9-80 IP55
FNLB 9-80 IP55
FNLB 9-80 IP55
5009/10/11T
2,492
29,657
37,925
1,968
5810/11/12T
96,664 107,097** UNC 7/8"
FNLB 9-100 IP55
FNLQ 9-100 IP55
FNLB 9-100 IP55
FNLB 9-100 IP55
6806/7/8TS
96,694
FNLB 9-80 IP55
FNLQ 9-80 IP55
FNLB 9-80 IP55
FNLB 9-80 IP55
97,679** UNC 3/4"
97,451 112,609**
6806/7/8T
17,000
3,220
34,323
42,000
1,417
UNC 1"
108,465 109,490** UNC 3/4"
6809/10/11TS
109,263 124,420**
6809/10/11T
* 2 poles
** HGF API 541
FNLB 11-110 IP55 FNLQ 11-110 IP55 FNLB 11-110 IP55 FNLB 11-110 IP55
2,205
UNC 1"
FNLB 9-80 IP55
FNLQ 9-80 IP55
FNLB 9-80 IP55
FNLB 9-80 IP55
FNLB 11-110 IP55 FNLQ 11-110 IP55 FNLB 11-110 IP55 FNLB 11-110 IP55
Fan cover with noise supressor
dimensions
HGF
Frame
HGF API 541
Poles
Poles
2
>=4
2
75,223
83,26
77,165
5009/10/11T 87,034
5006/7/8T
NEMA
14,500
5810/11/12TS
3xNPT3/4"
1,181
2xNPT3"
NEMA - Dimensions in inches
L
4
85,236
95,07
88,976
84,474
94,3
85,433
95,276
5810/11/12T 96,285
106,1
97,244
107,087
6806/7/8T
110,6
97,679
112,61
5807/8/9T
96,695
6809/10/11T 108,506
97,047
122,5 109,490 124,409
Motor dimensions - Rolling Bearings and Vertical Normal Thrust
Frames HGF 450 to 630 (NEMA 7006/10 to 9606/10)
500
AA
750
250
850
275
AB
950
1050
AC
1000
1100
AD
815
825
AE
540
550
560
950
320
1200
1220
890
620
630
1250
330
1440
1400
940
670
Frame
H
HA.
HC
HD
K
K´
450
450
60
950
1155
36
56
B
800
900
1000
1120
1250
900
1000
1120
1250
1400
1000
1120
1250
1400
1600
1000
1120
1250
1400
1600
BA
230
300
BC
660
450
BB
1450
1660
BD
C
90
D
E
ES
F
G
GD
85*
170*
140*
N
22*
76*
14*
130
250
200
32
119
18
120
210
-
32
-
127
315
150
375
5
400
500
1900
180
400
130
250
-
32
-
137
450
600
2000
180
450
150
250
-
36
-
158
L
d1
s1
s2
DE
2XRP(RWG)3/4"
IEC - Dimensions in mm
450
A
2XRP(RWG)3"
Frame
F
G
GD
BEARINGS
IEC - Dimensions in mm
HGF
2655
M20*
2485
M24
500
500
65
1050
1215
42
-
2670
M24
560
560
70
1174
1321
42
-
2850
M24
630
80
1360
1490
42
-
3200
M30
AA
AB
AC
AD
AE
B
32
36
40
45
50
36
40
45
50
56
40
45
50
56
63
36
40
45
50
56
BA
630
HGF API 541
DE
NDE
NDE
6220
6220
6220
6220
6328
6324
6328
6328
6330
6324
6330
6330
NU228+6228
NU224
-
-
Nu232+6232
NU224
-
-
BD
C
*2 poles
NEMA - Dimensions in inches
A
7006/10
9606/10
49
NEMA - Dimensions in inches
Frame
30
9,961
Frame
H
HA.
7006/10
17,5
2,165
37,402
39,370
32,087
21,260
8006/10
34
11,000 41,500
43,500
43,700
21,500
8806/10
38
12,600 47,200
48,000
45,000
24,500
12,600 60,000
54,300
48,400
24,500
HC
HD
K
K´
37,185
45,256
1,417
2,205
9,134
BC
26,063
BB
57,087
12,000
17,800
66,000
15,700
19,700
74,800
3,543
5,900
D
E
ES
3,375*
6,75*
5,512*
0,875* 2,88* 0,875*
5,125
11,625
9,842
1,250
4,423 1,250
14,000
4,750
11,625
-
1,250
4,041
-
15,000
5,125
11,625
-
1,250
4,423
-
17,500
6,000
11,625
-
1,500
5,155
-
12,500
0,197
7,100
15,700
19,700
74,600
d1
s1
s2
BEARINGS
HGF
L
DE
NDE
HGF API 541
DE
NDE
6220
6220
6220
6220
UNC1 1/4
6328
6324
6328
6328
20
2,900
41,500
52,500
1,700
-
108,5
UNC 1
8806/10
22
2,700
46,000
57,800
1,700
-
114
UNC 1 1/4
9606/10
24
3,100
51,200
53,000
1,700
-
126,9
UNC 1 1/4
3XNPT3/4
UNC7/8*
99,617
2XNPT3"
104.585
8006/10
* 2 poles
N
6330
6324
6330
6330
NU228+6228
NU224
-
-
Nu232+6232
NU224
-
-
Flange, fan cover with noise supressor and steel terminal boxes dimensions –
horizontal and vertical normal thrust machines
Frames HGF 450 to 630 (NEMA 7006/10 to 9606/10)
NEMA - Dimensions in inches
IEC Dimensions in mm
Flange
Frame
Flange
C
ØM
ØN
ØP
ØS
450
FF - 1080
315
1080
1000
1150
28
500
FF - 1180
375
1180
1120
1100
28
560
-
-
-
-
-
-
630
-
-
-
-
-
-
7006/10
FF 1080 12,402
42,520
39,370
45,275
1,102
8006/10
FF - 1180 14,764
46,457
44,094
43,307
1,102
T
Qtde. Furos
6
8
0,236
8
8806/10
-
-
-
-
-
-
9606/10
-
-
-
-
-
-
Frame
AD'A
HD'A
AD'B
HD'B
AD'C
HD'C
AD'D
HD'D
AD'E
HD'E
450
950
1200
1035
1255
1085
1295
1105
1575
1335
1635
500
-
-
-
-
-
-
-
-
-
-
560
-
-
-
-
-
-
-
-
-
-
630
-
-
-
-
-
-
-
-
-
-
7006/10
37,185
47,028
40,748
49,606
42,717
50,610
43,504
61,831
52,560
64,154
8006/10
-
-
-
-
-
-
-
-
-
-
8806/10
-
-
-
-
-
-
-
-
-
-
9606/10
-
-
-
-
-
-
-
-
-
-
NEMA - Dimensions in inches
IEC Dimensions in mm
Steel Terminal boxes
Motor dimensions - Sleeve Bearings
Frames HGF 450 to 630 (NEMA 7006/10 to 9606/10)
Frame
IEC - Dimensions in mm
450
500
A
AA
750
250
850
275
AB
950
1050
AC
1000
1100
AD
815
825
AE
540
550
560
950
320
1200
1220
890
620
630
1250
330
1440
1400
940
670
Frame
H
HA.
HC
HD
K
K´
450
450
60
950
1155
36
56
B
800
900
1000
1120
1250
900
1000
1120
1250
1400
1000
1120
1250
1400
1600
1000
1120
1250
1400
1600
BA
230
300
BC
660
450
BB
1450
1660
BD
C
90
D
E
ES
F
G
GD
85*
170*
140*
N
22*
76*
14*
130
250
200
32
119
18
120
210
-
32
-
127
475
150
500
5
400
500
1900
180
560
130
250
-
32
-
137
450
600
2000
180
600
150
250
-
36
-
158
L
d1
s1
s2
DE
NDE
DE
NDE
2885
M20*
FNLB 9-80 IP55
FNLQ 9-80 IP55
FNLB 9-80 IP55
FNLB 9-80 IP55
2805
M24
F
G
GD
BEARINGS
500
65
1050
1215
42
-
2920
M24
560
560
70
1174
1321
42
-
3130
M24
630
630
80
1360
1490
42
-
3400
M30
AA
AB
AC
AD
AE
B
32
36
40
45
50
36
40
45
50
56
40
45
50
56
63
36
40
45
50
56
BA
2XRP(RWG)3/4"
500
HGF API 541
FNLB 11-125 IP55 FNLQ 11-125 IP55 FNLB 11-125 IP55 FNLB 11-125 IP55
2XRP(RWG)3"
IEC - Dimensions in mm
HGF
FNLB 11-125 IP55 FNLQ 11-125 IP55 FNLB 11-125 IP55 FNLB 11-125 IP55
Contact WEG
* 2 poles
NEMA - Dimensions in inches
Frame
7006/10
A
30
9,961
37,402 39,370 32,087 21,260
8006/10
34
11,000 41,500 43,500 43,700 21,500
8806/10
38
12,600 47,200 48,000 45,000 24,500
9606/10
49
Frame
H
12,600 60,000 54,300 48,400 24,500
9,134
BC
BB
26,063 57,087
12,000
17,800 66,000
15,700
19,700 74,800
BD
C
3,543
D
E
ES
3,375*
6,75*
5,512*
0,875* 2,88* 0,875*
5,125
11,625
9,842
1,250 4,423 1,250
19,680
4,750
11,625
-
22,050
5,125
11,625
25,100
6,000
11,625
12,402
5,900
15,700
19,700 74,600
K
K´
L
d1
s1
s2
104.585 UNC7/8*
17,5
2,165
37,185 45,256
1,417
HGF API 541
DE
NDE
DE
NDE
FNLB 9-80 IP55
FNLQ 9-80 IP55
FNLB 9-80 IP55
FNLB 9-80 IP55
2,205
99,617 UNC1 1/4
FNLB 11-125 IP55 FNLQ 11-110 IP55 FNLB 11-125 IP55 FNLB 11-125 IP55
FNLB 11-125 IP55 FNLQ 11-125 IP55 FNLB 11-125 IP55 FNLB 11-125 IP55
8006/10
20
2,900
41,500 52,500
1,700
-
119,5
UNC 1
8806/10
22
2,700
46,000 57,800
1,700
-
126,6
UNC 1 1/4
9606/10
24
3,100
51,200 53,000
1,700
-
137,1
UNC 1 1/4
3XNPT3/4
7006/10
2XNPT3"
NEMA - Dimensions in inches
HD
Contact WEG
* 2 poles
-
-
1,250 4,423
-
-
1,500 5,155
-
7,100
BEARINGS
HC
1,250 4,041
0,197
HGF
HA.
N
5006/7/8T
5009/10/11T
5807/8/9T
5810/11/12T
6806/7/8T
6809/10/11T
7006/10
Dimensions in inches
P
AB
AE
U
R
S
IV POLES OR MORE
AH
ES
EU
EW
EX
27,559
27,556
15,748
2,625
2,312
0,625
5,000
3,500
2,250
0,375
0,750
30,709
28,937
16,929
3,125
2,704
0,750
7,000
5,000
2,625
0,500
1,000
35,039
30,315
18,504
3,875
3,309
1,000
7,500
5,000
3,375
0,500
1,000
21,26
4,875
4,178
1,25
10
7,5
4,125
0,75
1,5
BB
α
Qtd
Furos
C
d1
s1
s2
72,835
UNC 3/4"
84,646
UNC 3/4"
82,874
UNC 3/4"
94,685
UNC 3/4"
97,047
UNC 7/8"
3xNPT3/4"
FRAME
2xNPT3"
NEMA High Thrust
Vertical High thrust Dimensions
Frames HGF 315L/A/B to 450 (NEMA 5006/7/8T to 7006/10)
39
37.185
NEMA High Thrust
Flange P
FRAME
5006/7/8T
5009/10/11T
5807/8/9T
5810/11/12T
6806/7/8T
6809/10/11T
7006/11
AJ
AK
BD
BF
14,750
13,500
20,000
0,687
26,000
22,000
30,500
0,812
32,000
26,000
36,000
1,000
39,000
33,750
42,000
1,125
0,250
22.5º
8
108,858 UNC 7/8"
116,141 UNC 7/8"
Standard/Optional HGF terminal boxes dimensions IEC Market
A*
C*
E*
* internal dimensions of these boxes can be found on the same page of the auxiliary terminal boxes
B*
D
F
Standard/Optional HGF terminal boxes dimensions NEMA Market
B*
A*
D*
C*
F
E
H
G
* internal dimensions of these boxes can be found on the same page of the auxiliary terminal boxes
I
Auxiliary terminal box dimensions HGF
IEC
NEMA
Carcaças
315L/A/B a 315C/D/E
355L/A//B a 400C/D/E
450 a 630
5006/7/8 e 5009/10/11
5807/08/09 a 6809/10/11
7006/10 A 9606/10
A
325
325
375
12,795
12,795
14,764
B
290
290
290
11,417
11,417
11,417
Dimensões em mm
C
D
125
278
115
278
100
279
4,921
10,945
4,528
10,945
3,937
10,984
E
175
175
175
6,890
6,890
6,890
Terminal block dimensions
High voltage HGF terminal Block - IEC
High voltage HGF terminal Block - NEMA
Low voltage HGF terminal Block - IEC
Low voltage HGF terminal Block - NEMA
F
125
125
175
4,921
4,921
6,890