Surge Protective Devices
Refer to Catalog 6671CT9701
www.schneider-electric.us
HWA Series Non-Modular, Nipple-Mounted Surge Protective Device
The Surgelogic® HWA series surge protective device is a non-modular, nipple-mounted
parallel connected surge protective device. A surge suppression path is provided for each
mode, line-to-neutral (L–N), line-to-line (L–L), line-to ground (L–G), and neutral-to-ground
(N–G). Each mode is individually fused and uses circuitry with thermal cutouts. On-line
diagnostics continuously monitor the device status.
Listed to CULUS 1449 Second Edition rev. 2/9/2007 (Third Edition effective 9/29/2009), and
UL 1283 where applicable. Meets requirements of fourth edition CSA C22.2 No. 8-M1986.
Type HWA
•
•
•
•
Audible alarm indicates a fault condition
Compact design provides easy mounting inside or outside the equipment cabinets
Dry contacts
Does not contain alarm enable/disable switch
Table 6.13:
HWA Series Non-Modular, Nipple-Mounted Surge Protective Device
Service
Voltage
6
Peak Surge Current Rating
NEMA 3R,
per Phase (kA)
4X, 12 Cat. No.
50
TVS1HWA50X
120/240 V,
1-phase, 3-wire
80
TVS1HWA80X
+ground
120
TVS1HWA12X
50
TVS2HWA50X
208Y/120 V,
3-phase, 4-wire
80
TVS2HWA80X
+ground a
120
TVS2HWA12X
50
TVS3HWA50X
120/240 V,
3-phase, 4-wire +ground
80
TVS3HWA80X
High-leg Delta
120
TVS3HWA12X
50
TVS4HWA50X
480Y/277 V,
3-phase, 4-wire
80
TVS4HWA80X
+ground ab
120
TVS4HWA12X
a
Can be used on 4-wire or 3-wire grounded neutral system.
b
480Y/277 series applies to the following voltages 380Y/220, 400Y/230, and 415Y/240
$ Price
SURGE PROTECTIVE DEVICES
1399.00
1560.00
1995.00
1492.00
1648.00
2118.00
1492.00
1648.00
2118.00
1549.00
1705.00
2198.00
XW Series Non-Modular, Nipple-Mounted Surge Protective Device
The XW Series SPD is a multi-phase surge suppressor rated at 100 kA per phase. It is
compact and affordable and comes in a variety of voltage configurations, including Delta.
The XW Series SPD is designed for use in industrial, commercial, and residential
applications and comes standard in a NEMA 4 housing.
Listed to UL 1449 Second Edition rev. 2/9/2007, cUL Listed, and CSA 22.2 No. 8-M1986.
Type XW
•
•
•
•
Audible alarm indicates a fault condition
Compact design provides easy mounting inside or outside the equipment cabinets
Dry contacts
Does not contain alarm enable/disable switch
Table 6.14:
XW Series Non-Modular, Nipple-Mounted Device
Service Voltage
Surge Capacity
MCOVa
Cat. No.
120/240 V, 1-phase
100 kA/phase
150/300 V
TVS1XW100C
208Y/120 V, 3-phase
100 kA/phase
300/150 V
TVS2XW100C
240D/120 V, 3-phase
100 kA/phase
300/150 V
TVS3XW100C
480Y/277 V, 3-phaseb
100 kA/phase
640/320 V
TVS4XW100C
480D V, 3-phase
100 kA/phase
640 V
TVS5XW100C
240D V, 3-phase
100 kA/phase
300 V
TVS6XW100C
600Y/347 V, 3-phase
100 kA/phase
780/390 V
TVS8XW100C
600D V, 1-phase
100 kA/phase
780 V
TVS9XW100C
a
MCOV = Maximum Continuous Operating Voltage
b
480Y/277 series applies to the following voltages 380Y/220, 400Y/230, and 415Y/240
$ Price
1764.00
1875.00
1875.00
2024.00
2150.00
1875.00
2024.00
2150.00
XR Series Nipple-Mounted Surge Protective Device
The XR Series SPD provides high-quality surge protection in a compact and versatile
package. This product is ideal for panel builders as well as manufacturers and integrators of
instrumentation cabinets for industrial, commercial, and residential applications for singlephase power systems.
UL, cUL Listed, UL 1449 Second Edition rev. 2/9/2007 (Third Edition effective 9/29/2009),
CSA 22.2 No. 8-M1986
Type XR
•
•
•
•
•
40 kA surge rating
Short circuit current rating 25 kA
NEMA 4X housing suitable for indoor or outdoor application
Audible alarm standard
Convenient back or side nipple mounting locations available
Table 6.15:
XR Series Nipple-Mounted Surge Protective Devices
Service Voltage
120/240 V,
1-phase, 3-wire +ground
120 V,
1-phase, 2-wire +ground
230 V,
1-phase, 2-wire +ground
6-6
DE2
Discount
Schedule
Mounting Method
Back Nipple
Side Nipple
Back Nipple
Side Nipple
Back Nipple
Side Nipple
Cat. No.
TVS120XR40B
TVS120XR40S
TVS120XRB
TVS120XRS
TVS230XR40B
TVS230XR40S
$ Price
315.00
315.00
290.00
324.00
347.00
347.00
© 2009 Schneider Electric
All Rights Reserved
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Surge Protective Devices
Secondary Surge Arresters
Class 6671 / Refer to Catalog 6671CT9701
www.schneider-electric.us
LC Series In-Line Surge Protective Device and Noise Filter
The LC Series SPD offers high-quality surge protection and noise filtration for any microprocessor-based product,
computer, analyzer, PLC, motion control system, original equipment manufacturer (OEM), or any sensitive single phase
load. The LC can be connected to the incoming power source (20 A or less) to isolate the control cabinet from the
outside environment. This product is ideal for panel builders as well as manufacturers and integrators of instrumentation
cabinets for industrial, commercial, or residential applications. The LC uses a series/hybrid suppression circuit that
delivers 40,000 peak amps of surge protection with true sine wave tracking protection up to -75 dB of noise filtration.
UL 1449 Second Edition rev. 2/9/2007 330 Vac clamping rated. CURUS, CSA, and CE recognized,
CSA C22.2 No. 0-M91, CSA C22.2 No. 8-M1986, CSA C22.2 No. 42-M1984, CSA C22.2 No. 21-M90
Type LC
•
•
•
•
•
•
40 kA surge rating
Short circuit current rating 10 kA maximum
Optional Form C dry contact status output
DIN rail or direct panel mounting
LED status indication
-75 db noise filtration sine wave tracking
Table 6.16:
LC Series In-Line Surge Protective Device and Noise Filter
Secondary Surge Arresters
The Secondary Surge Arrester (SDSA) series products are designed primarily to protect against external surges at service entrance panels. They
are designed and tested to be used on the line side or the load side of the main service disconnect switch. These devices may also be used for
surge protection of irrigation pumps, oil pumps and motors operating below 600V.
Hard-Wired Secondary Surge Arresters
SDSA1175
The SDSA1175 Secondary Surge Arrester is designed and listed for indoor or outdoor installation and surge protection
of single-phase three-wire 120/240 Vac 60 Hz electrical services and major appliances. Two SDSA1175 Secondary
Surge Arresters can be installed to provide protection on 208Y/120 Vac three-phase four-wire services.
The SDSA3650 Secondary Surge Arrester is designed and listed for indoor or outdoor installation and surge protection
of three-phase grounded electrical services up to 600 Vac. and is used extensively in service entrance panels to provide
an efficient and economical means of surge protection.
CULUS secondary surge arresters. Meets ANSI/IEEE C62.11-1993 and meets requirements of NEC Article 285.
SDSA3650 Listed to UL Second Edition rev. 2/9/2007 (Third Edition effective 9/29/2009).
•
•
•
•
Suitable for indoor and outdoor applications (NEMA 4X housing)
LED indicates operational status
SDSA1175 36 kA per phase
SDSA3650 40 kA per phase
Table 6.17:
SDSA3650
6
a
Rated Load Current
Cat. No.a
$ Price
5A
TVS120LC5
255.00
10 A
TVS120LC10
282.00
120 V,
1-phase
15 A
TVS120LC15
308.00
20 A
TVS120LC20
330.00
5A
TVS230LC5
255.00
10 A
TVS230LC10
282.00
230 V,
1-phase
15 A
TVS230LC15
308.00
20 A
TVS230LC20
330.00
Optional Form C Dry Contact—Add “C” suffix to catalog number, e.g. TVS120LC5C. Option Price $60.00
SURGE PROTECTIVE DEVICES
Service Voltage
Hard-Wired Secondary Surge Arresters
Description
Cat. No.
Secondary Surge Arrester
For 1-phase, 3-wire systems.
SDSA1175 b
150 Vac phase-to-ground maximum.
Secondary Surge Arrester and Surge Protective Device
For 3-phase systems.
SDSA3650
600 Vac phase-to-ground maximum.c
b
See Table 6.18 for QOSAMK mounting kit for installation in QO load centers.
c
Do not use on ungrounded systems. Systems must be solidly grounded.
$ Price
61.00
165.00
Mounting Brackets for Nipple-Mounted Devices
The nipple products shown in this catalog provide a convenient means of incorporating SPD protection within a new or
existing cabinet. The mounting bracket (below) is designed for easy mounting of nipple products inside enclosures.
Table 6.18:
Mounting Bracket for Enclosures
Description
Mounts to QO®, Homeline® Load Center and other enclosures
Cat. No.
QOSAMK
$ Price
7.60
QOSAMK
© 2009 Schneider Electric
All Rights Reserved
DE1B
Discount
Schedule
6-7
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com