Cat. #
RL
SERIES
Approvals
Job
Type
Outdoor Lighting
EXPANDED CAPABILITIES
EXPANDED CAPABILITIES
Hubbell offers many specific options on the RL Series to satisfy technical electrical or
construction requirements. Additional features such as silicone gasketed/filtered optical
systems, quick connect starters or electro-reg long life metal halide ballastry are available through the following modular logic. Simply build your desired fixture by choosing one
item from each section. Two-door design is standard.
RLC
RLG
C
C
A
RLC
D
full cutoff
RLG
B
A
B
C
D
81/4"
153/4"
363/4"
–
–
143/4"
210 mm 400 mm 933 mm
–
153/4"
363/4"
–
400 mm 933 mm 375 mm
12" Minimum (305mm) distance for door
removal (cutoff & refractor unit)
ORDERING INFORMATION
ORDERING EXAMPLE
RLGD
Lens Door
-
40P35
-
Ballastry/Voltage/
Source
LENS DOOR
RLGT Glass Refractor - top mounted
ballast
RLGD Glass Refractor - door mounted
ballast
RLCD Cutoff - door mounted ballast
RLCT Cutoff - top mounted ballast
021
Optical
Distribution/
Gasketing
-
0
UL Approval
-
A
-
5
Photocell Ballast Door
Receptacle
Closure
BALLASTRY/VOLTAGE/SOURCE 2,4
40P35
PS 480 MH
40P38
PS Quad MH
32P35
PS 480 MH
32P38
PS Quad MH
40ER17
E-Reg® 120
40ER3 7
E-Reg® 240
7
40ER4
E-Reg® 277
25S35
AR 480V HPS
25S381
AR Quad HPS
40S35
AR 480V HPS
40S381
AR Quad HPS
-
F0
Fusing
-
M51
Finish
OPTICAL DISTRIBUTION/GASKETING
021
MC II Felt (cutoff only)
022
MC II Silicone/CFB (cutoff only)
031
MC III Felt (cutoff only)
032
MC III Silicone/CFB (cutoff only)
061
MS II Felt
062
MS II Silicone/CFB
071
MS III Felt
072
MS III Silicone/CFB
111
MN III Felt (HPS only)
112
MN III Silicone/CFB (HPS only)
351
MN II Felt (MH only)
352
MN II Silicone/CFB (MH only)
362
MN III Silicone/CFB (MH only)
UL APPROVAL
0
None
16
UL Listed
PHOTOCELL RECEPTACLE
A5
PCR 240V
25
None
3 3,5
With PCR
BALLAST DOOR CLOSURE
5
Screw and Latch
6
Screw only
FUSING
F0
F1
F2
F3
F4
F5
None
120V
208V
240V
277V
480V
FINISH
M51
Bronze
M53
Gray
1 Recommended offering.
2 50 Hz ballastry available, consult factory.
3 PCR wired to highest voltage tap of ballast, i.e.: Quad-Tap at 277V. PCR will accept 120 through 480V.
®
4 Ballastry Legend - PS = Pulse Start Metal Halide; AR= Auto Reg; E-Reg = Electro Reg.
5 PTL photocontrol or PSC shorting cap ordered separately. See PSG5 page 609.
6 UL not offered on 400W ER units.
7 Electro-Reg® metal halide systems typically doubles 400W MH life.
NOTE: All units have Mogul base sockets.
Due to our continued efforts to improve our products, product specifications are subject to change without notice.
Hubbell Outdoor Lighting • 701 Millennium Boulevard • Greenville, SC 29607 • PHONE: 864-678-1000
For more information visit our web site: www.hubbelloutdoor.com
Outdoor Lighting
Copyright © 2009 HUBBELL LIGHTING All Rights Reserved RL-EXP-SPEC6/09 Printed in USA