Rev: 2014/05/19 45 Deck TM INDOOR Imagine the Possibilities Accent Light Vanity Entryway Elevator Lobby Features WALL 5 year product warranty Sleek profile Dual layer diffuser; rear layer is 1/4" thick frosted acrylic with a matte finish Low energy, long life LED source Integral high power factor electronic power supply included (CB1958) PSX models – use with PS24 Series of 24VDC Class II remote power supplies. Each PS24 can power multiple fixtures (see total wattage table) and is available with 0-10V dimming. System costs are reduced by distributing the PS24 over multiple fixtures. Lowvoltage Class II wiring between the PS24 and connected fixtures simplifies installation. The PS24 is not included with fixtures; order separately - see Accessories section Horizontal or vertical mounting Surface mount or semi-recessed (mud required for semi-recessed models; mud frame included) Recessed backbox is available for pre-shipment for rough-in installation ETL listed to UL standards (US and Canada) for indoor damp locations. Not recommended for exterior applications LED Features XPS ADA White source (3000K, 3500K) PSX models are dimmable with PS-24VDC90W02 power supply Modular design allowing replacement of the LED source and power supply Constant current LED technology to protect LEDs from experiencing "over current" conditions that can cause overheating and premature failure Thermally managed within manufacturer specifications to promote long LED life No ultraviolet or infrared, alleviating potential damage to art, fabric and materials Mercury free LED source reduces impact to waste stream Suggested Variations NEW LED Alternative housing finish Mounting Detail Recessed Mount 120V through 277V input 120V through 277V input Integral 120V through 277V input Power Supply Integral in recessed backbox Power IntegralSupply in recessed backbox Power Supply in recessed backbox Recessed Mount - Low Voltage Wall front Wall front Wall front 120V or 277V input 120V or 277V input Remote 120V or 277V input Power RemoteSupply Power Supply Remote 24VDC output Power Supply Wall front 24VDC output Additional unitsoutput may be attached up to maximum rated wattage Wall front 24VDC Additional units may be attached up to maximum rated wattage Wall front 120V or 277V inputbe attached up to maximum rated wattage Additional units may Surface Mount 120V or 277V input 120VRemote or 277V input Power Supply Remote Power Supply Remote 24VDC output Power Supply 24VDC output Wall front Additional24VDC units mayoutput be attached up to maximum rated Wallwattage front Additional units may be attached up to maximum rated Wallwattage front Additional units may be attached up to maximum rated wattage 800-788-VISA www.visalighting.com Tile Trim Flange Detail (TTF Option) Wall Tile (1/4” minimum thickness) Recessed Housing 2-1/4” (56mm) Decorative Tile Flange C Deck O M P A N I O N S Pendant Page 242 Rev: 2014/05/19 44 Order Code Example Color Code Required for Painted Finishes -LNW1700 (24VDC) - CB1964PSX Model Number -AM Diffuser Retainer -DCC Diffuser Options Housing Surface Backbox Options Front layer options; Back layer is matte white acrylic Dimensions LNW1700(MVOLT) • LWW1700(MVOLT) CB1958 Recessed Mount with Integral Power Supply DECK CB1958PSX LNW1700(24VDC) • LWW1700(24VDC) CB1964PSX LNW1700(24VDC) • LWW1700(24VDC) (Painted) BA BBA BCA BZA • CB CUA OBA PRA RBA • SN SNA Power Supply is not included. Order separately (see Accessories Section below) TM Surface Mount Low Voltage -TW9016 Finishes Nominal Source Lumens Dual Layer Diffuser Recessed Mount Low Voltage BA Source (Voltage) (Painted) • • • • • AM AR OLIN PP SL TT (Painted) Power Supply is not included. Order separately (see Accessories Section below) DCC RB TTF(Painted) XPS W H D RW RH RD 22-3/4" 3-1/2" 1-1/4" 23-3/8" 1-7/8" 3-1/4" (578 mm) (89 mm) (32 mm) (594 mm) (48 mm) (83 mm) DCC • MRI RB TTF(Painted) XPS W H D RW RH RD 22-3/4" 3-1/2" 7/8" 23-3/8" 1-7/8" 3-1/4" (578 mm) (89 mm) (22 mm) (594 mm) (48 mm) (83 mm) DCC JBC • MRI XPS W H D 22-3/4" 3-1/2" 2-5/8" (578 mm) (89 mm) (67 mm) JBC option increases depth by .09" Accessories - Order Separately (see Technical Reference Section for additional details) Power Supply for PSX models (order separately) PS-24VDC90W01 24VDC 90 watt power supply; no dimming, 75’ maximum remote distance using 16 AWG wire PS-24VDC90W02 24VDC 90 watt power supply, 0-10V dimmable, 20’ maximum remote distance Line Drawings Depth is measured from wall to front of fixture W=Width H=Height RW=Recessed Width RH=Recessed Height RW H CB1958 Front Diffuser JBC Option Side View CB1958 D RD Recessed Backbox Housing CB1964PSX D Diffuser Retainer JBC Option D CB1964PSX JBC Option Surface Backbox RH Rear Diffuser Mud Frame LNW • LWW Neutral White, 3500K, LED Warm White, 3000K, LED Finishes (Painted) BA BBA BCA BZA • CB CUA OBA PRA RBA • SN SNA Color Code Required - see color chart Brushed Aluminum Brushed Brass Alternative Brushed Chrome Alternative Brushed Bronze Alternative Polished Chrome Brushed Copper Alternative Oil-Rubbed Bronze Alternative Pewter Alternative Rustic Brass Alternative Satin Nickel Satin Nickel Alternative • • • • • JBC • MRI RB TTF(Painted) XPS Nominal LED Source / Fixture Wattage 22 / 26 Maximum Units 4 Photometrics and 3D Modeling Complete BIM, Sketchup, and Photometric files for these models can be downloaded from www.visalighting.com IES File Number (MVOLT; 24VDC) (MVOLT; 24VDC) Diffuser Options AM Clear acrylic with matte finish ® AR Arctic Crush Lumicor ® OLIN Oyster Linen Lumicor ® PP Paper Leaf Lumicor ® SL Silver Spun Lumicor TT Tiger Taipei Lumicor ® Options DCC Door Height = 7' Ceiling Height = 9' Silhouette Height = 6' XPS Lumens 1700 LED sources are 85CRI typical, within 4-step MacAdam Specify Voltage or MVOLT MVOLT fixture accepts 120 through 277 input voltage Recessed Backbox W Maximum Units per Power Supply Options Specify 120V or 277V Abbreviation Key • Indicated Finish or Option is not available with XPS Source (voltage) D=Depth RD=Recessed Depth Front View Input Voltage CB1958-LNW1100-OLIN CB1958PSX-LNW1100-OLIN CB1964PSX-LNW1100-OLIN LER 23 23 23 Report 27045 27045 27045 LTL 27045 Source: 12 white LEDs (3432K, CRI 80.2), 24W Candela Distribution Angle 0.0° 0 15 25 70 45 102 70 114 90 102 115 123 135 105 160 68 180 14 180˚ 150˚ 120˚ 90˚ 60˚ 0˚ 30˚ Lighting Facts label available online at www.visalighting.com Damp clear coat for metal finishes (required for 5 year warranty when used in damp locations) Junction box cover (5" square) for use with an existing 4" junction box. Painted to match surface backbox finish Non-ferrous materials for use in MRI room, requires dimming to be deactivated Pre-ship recessed backbox Tile trim flange; Color Code Required - see color chart Express 10 day shipment 800-788-VISA www.visalighting.com FINISHES AND Specify color code when ordering. Painted Finishes (standard) Individual paint and finish samples are available upon request. For additional information see VisaLighting.com/material-finishes Acrylic Powder Coat TW9016 Traffic White (RAL9016) 800-788-VISA VisaLighting.com MATERIALS CW9001 Cream (RAL9001) GW9002 Grey White (RAL9002) JB9005 Jet Black AG7038 Agate Grey (RAL9005) (RAL7038) NEW NEW HTHR Heather CVBL Cove Blue Polyester Powder Coat BSIL Blade Silver GSIL Graphite Silver GLIM Glimmer SUNG Sungold NEW BRNZ Bronze OBRZ Old Bronze BMAT Bronze Matte PB1035 Pearl Beige (RAL1035) For accurate metal matching use BHMA standard or request finish samples. Metal Finishes (premium options) Individual paint and finish samples are available upon request. For additional information see VisaLighting.com/material-finishes NEW BA Brushed Aluminum BB Brushed Brass (BHMA606) BBA Brushed Brass Alternative NEW CB Polished Chrome (BHMA625) CUA Brushed Copper Alternative NEW BCA Brushed Chrome Alternative BCB Brushed Chrome (BHMA626) BSS Brushed Stainless Steel (BHMA630) NEW GFA Grinder Finished Aluminum RUST Rust NEW OBA Oil-Rubbed Bronze Alternative PB Polished Brass (BHMA605) PRA Pewter Alternative SN Satin Nickel SNA Satin Nickel Alternative VG Verdigris Patina over Copper (BHMA619) BU Brushed Copper BZ Brushed Bronze (BHMA612) BZA Brushed Bronze Alternative NEW PSS Polished Stainless Steel (BHMA629) RBA Rustic Brass Alternative SF Brushed Textured Stainless Steel Other Materials (premium options) Wood CW Cherry Wood NM Natural Mahogany Alabaster WB White Birch ABA Hand-Painted Alabaster Alternative Glass GD Opal White Glass Colored Acrylic PGD Patterned Glass Diffuser GIA Glacier Ice Acrylic OKA Orange Krush Acrylic OLIN Oyster Linen Acrylic SL Silver Spun CCG Clear Crushed Glass ® Lumicor AR Arctic Crush PP Paper Leaf BCG Blue Crushed Glass TT Tiger Taipei WMA White Mist Acrylic