Lightvault 8 at Long Beach Convention Center, Long Beach, CA
outdoor lighting
2014 marks Kim Lighting’s 80th anniversary. Founded in 1934 by F.B. Nightingale, Kim
Lighting is the world’s foremost designer and manufacturer of quality, high-performance
outdoor architectural and landscape lighting products. F.B. Nightingale established a
culture of innovation and uncompromising quality that is still at the core of the company
today. Kim Lighting continues to innovate in landscape lighting, site/roadway lighting,
and wall mounted lighting.
®
Bluetooth enabled
wireless device
controls aiming and
dimming, keeping
the optical chamber
moisture free
LTV81RG
LTV81SS
LTV81HS
LTV81FF
LTV81EB
Pour Box for
installation flexibility
LTV81DM
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc.
and any use of such marks by Kim Lighting is under license.
215
®
http://www.kimlighting.com/ltv8/
The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Kim Lighting is under license.
outdoor lighting
LED UPGRADE KITS
PicoPrism™ Upgrade
PicoEmitter™ Upgrade
PicoPrism™ ...................................................................... 220 - 221
PicoEmitter™ ................................................................... 222 - 223
SITE / ROADWAY
ALT
WP9
AR/SAR
SRS1
BNS1/BNM
RA
AE/BE
LE
CC/CCS
SET/ET
STS/STL
Altitude™ ................................................................................ 224
WARP9® .......................................................................... 225 - 226
The Archetype® ................................................................ 227 - 228
Solitaire® ................................................................................ 229
Bounce®/MiniBounce ................................................................ 230
Era® ....................................................................................... 231
Era® Acorn/Era® Bell ................................................................. 232
Era® Lantern ............................................................................ 233
Curvilinear ...................................................................... 234 - 237
The Entablature® .............................................................. 238 - 239
Structural ....................................................................... 240 - 243
PARKING STRUCTURE
PGL7
LED Parking Garage Luminaires ................................................... 244
ARCHITECTURAL FLOODLIGHTS
CFL
Compact Floodlights ................................................................. 245
WALL MOUNTED
WF
SW
WD
Wall Forms® ............................................................................ 246
Site Wallforms® ........................................................................ 247
Wall Director® .......................................................................... 248
LOW LEVEL
GEM
BNB/LE
VRB/VSB
VRBC/VSBC
CB
SL
GEM® Bollard ........................................................................... 249
Bounce and Era® Lantern Bollard ................................................ 250
Vandal Resistant Bollards .......................................................... 251
Vandal Resistant Concrete Bollards ............................................. 252
Compact Bollard ...................................................................... 253
Site Lightforms ........................................................................ 254
IN-GRADE
LTV
12V
Lightvault® 8 ................................................................... 255 - 260
Minivault ............................................................................... 261
LANDSCAPE
UV
12V/UV
UV
12V/UV
12V/UV
12V/UV
Micro Flood ............................................................................. 262
Scarab ............................................................................ 263 - 264
Sign/Wall Lighter ..................................................................... 265
Traditional ............................................................................. 266
Ravenna ................................................................................ 267
Step Light .............................................................................. 268
217
®
http://www.kimlighting.com/ltv8/
The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Kim Lighting is under license.
®
Wireless Adjustable Aiming & Dimming.
Sealed LED Light Engine.
http://www.kimlighting.com/ltv8/
The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Kim Lighting is under license.
HID to LED Upgrade Kit PicoPrism
™
WP9S/SAR/STS/SET/LLF
FEATURES
LED UPGRADE KIT
•
•
•
•
•
•
•
•
Reduces energy consumption up to 50% compared to original HID source
350mA or 700mA current
Maintains architectural relevance, application integrity and extends asset value
0-10V dimming interface, allowing 0-100% illumination output options
Full palette of lighting distributions and color temperatures to match
existing installations
Preserves applicable UL/CUL/ETL product listing and manufacturer’s warranty
Compatible driver options for renewable energy systems
Qualifies for many rebates and tax incentives
ORDERING INFORMATION (Example)
WP9S-LED-KIT3P35
CATALOG NUMBER
WARP9 Small
WP9S-LED-KIT1P35 Type I
WP9S-LED-KIT2P35 Type II
WP9S-LED-KIT3P35 Type III
WP9S-LED-KIT4P35 Type IV
WP9S-LED-KIT5P35 Type V
WP9S-LED-KITLP35 One Way, Left
WP9S-LED-KITRP35 One Way, Right
The Archetype Small
SAR-LED-KIT1P35 Type I
SAR-LED-KIT2P35 Type II
SAR-LED-KIT3P35 Type III
SAR-LED-KIT4P35 Type IV
SAR-LED-KIT5P35 Type V
SAR-LED-KITLP35 One Way, Left
SAR-LED-KITRP35 One Way, Right
Structural Small
STS-LED-KIT1P35 Type I
STS-LED-KIT2P35 Type II
STS-LED-KIT3P35 Type III
STS-LED-KIT4P35 Type IV
STS-LED-KIT5P35 Type V
STS-LED-KITLP35 One Way, Left
STS-LED-KITRP35 One Way, Right
The Entablature Small
SET-LED-KIT1P35 Type I
SET-LED-KIT2P35 Type II
SET-LED-KIT3P35 Type III
SET-LED-KIT4P35 Type IV
SET-LED-KIT5P35 Type V
SET-LED-KITLP35 One Way, Left
SET-LED-KITRP35 One Way, Right
60L5K240
WARP9 Small
WP9S-LED-KIT1P70 Type I
WP9S-LED-KIT2P70 Type II
WP9S-LED-KIT3P70 Type III
WP9S-LED-KIT4P70 Type IV
WP9S-LED-KIT5P70 Type V
WP9S-LED-KITLP70 One Way, Left
WP9S-LED-KITRP70 One Way, Right
The Archetype Small
SAR-LED-KIT1P70 Type I
SAR-LED-KIT2P70 Type II
SAR-LED-KIT3P70 Type III
SAR-LED-KIT4P70 Type IV
SAR-LED-KIT5P70 Type V
SAR-LED-KITLP70 One Way, Left
SAR-LED-KITRP70 One Way, Right
Structural Small
STS-LED-KIT1P70 Type I
STS-LED-KIT2P70 Type II
STS-LED-KIT3P70 Type III
STS-LED-KIT4P70 Type IV
STS-LED-KIT5P70 Type V
STS-LED-KITLP70 One Way, Left
STS-LED-KITRP70 One Way, Right
The Entablature Small
SET-LED-KIT1P70 Type I
SET-LED-KIT2P70 Type II
SET-LED-KIT3P70 Type III
SET-LED-KIT4P70 Type IV
SET-LED-KIT5P70 Type V
SET-LED-KITLP70 One Way, Left
SET-LED-KITRP70 One Way, Right
PICOPRISM LED UPGRADE KIT
The Archetype (SAR) Shown
Low Level Flood
LLF10-LED-KITP35 Symmetric, Downward
LLF20-LED-KITP35 Assymetric, Right
Downward
LLF30-LED-KITP35 Assymetric, Left
Downward
LLF40-LED-KITP35 Symmetric, Upward
LLF50-LED-KITP35 Symmetric, Downward,
Concealed
LLF60-LED-KITP35 Symmetric, Downward,
Concealed w/ Guard
ELECTRICAL MODULE
WP9S/SAR/STS/SET
Color Temp.
2K 580nm
65W for 350mA 3K 3000K
120 LEDs,
4K 4200K
130W for 700mA 5K 5100K
Source
60L 60 LEDs,
WP9S
40L 40 LEDs,
45W for 350mA
SAR/STS/SET,
93W for 700mA
SAR/STS/SET
LLF
Source
Color Temp.
20L 20 LEDs,
2K 580nm
21W for LLF10/40 3K 3000K
16L 16 LEDs,
4K 4200K
17W for LLF20/30 5K 5100K
12L 13W for LLF50/60
Voltages
120V
208V
240V
277V
347V
480V
120
208
240
277
347
480
Voltages
UV 120-277V
Note: Refer to LED Upgrade Kit Spec Sheets
for complete ordering information
Consult DLC Website for current qualified
product listings.
PICOPRISM LED UPGRADE KIT
WARP9 (WP9S) Shown
Front
Back
Drilling Template
Electrical Module
LED EmitterDeck
220
LED EmitterDeck
Electrical Module
HID to LED Upgrade Kit PicoPrism
™
WP9L/AR/STL/ET/CC25
FEATURES
•
•
•
•
•
•
•
Reduces energy consumption up to 50% compared to original HID source
350mA or 700mA current
Maintains architectural relevance, application integrity and extends asset value
0-10V dimming interface, allowing 0-100% illumination output options
Full palette of lighting distributions and color temperatures to match
existing installations
Preserves applicable UL/CSA/ETL product listing and manufacturer’s warranty
Compatible driver options for renewable energy systems
Qualifies for many rebates and tax incentives
LED UPGRADE KIT
•
ORDERING INFORMATION (Example)
WP9L-LED-KIT3P70
CATALOG NUMBER
The Archetype Large 350mA
AR-LED-KIT1P35 Type I
AR-LED-KIT2P35 Type II
AR-LED-KIT3P35 Type III
AR-LED-KIT4P35 Type IV
AR-LED-KIT5P35 Type V
AR-LED-KITLP35 One Way, Left
AR-LED-KITRP35 One Way, Right
Structural Large 350mA
STL-LED-KIT1P35 Type I
STL-LED-KIT2P35 Type II
STL-LED-KIT3P35 Type III
STL-LED-KIT4P35 Type IV
STL-LED-KIT5P35 Type V
STL-LED-KITLP70 One Way, Left
STL-LED-KITRP70 One Way, Right
The Entablature Large 350mA
ET-LED-KIT1P35 Type I
ET-LED-KIT2P35 Type II
ET-LED-KIT3P35 Type III
ET-LED-KIT4P35 Type IV
ET-LED-KIT5P35 Type V
ET-LED-KITLP35 One Way, Left
ET-LED-KITRP35 One Way, Right
Curvilinear 25” 350mA
CC25-LED-KIT1P35 Type I
CC25-LED-KIT2P35 Type II
CC25-LED-KIT3P35 Type III
CC25-LED-KIT4P35 Type IV
CC25-LED-KIT5P35 Type V
CC25-LED-KITLP35 One Way, Left
CC25-LED-KITRP35 One Way, Right
120L5K240
The Archetype Large 700mA
AR-LED-KIT1P70 Type I
AR-LED-KIT2P70 Type II
AR-LED-KIT3P70 Type III
AR-LED-KIT4P70 Type IV
AR-LED-KIT5P70 Type V
AR-LED-KITLP70 One Way, Left
AR-LED-KITRP70 One Way, Right
Structural Large 700mA
STL-LED-KIT1P70 Type I
STL-LED-KIT2P70 Type II
STL-LED-KIT3P70 Type III
STL-LED-KIT4P70 Type IV
STL-LED-KIT5P70 Type V
STL-LED-KITLP70 One Way, Left
STL-LED-KITRP70 One Way, Right
The Entablature Large 700mA
ET-LED-KIT1P70 Type I
ET-LED-KIT2P70 Type II
ET-LED-KIT3P70 Type III
ET-LED-KIT4P70 Type IV
ET-LED-KIT5P70 Type V
ET-LED-KITLP70 One Way, Left
ET-LED-KITRP70 One Way, Right
Curvilinear 25” 700mA
CC25-LED-KIT1P70 Type I
CC25-LED-KIT2P70 Type II
CC25-LED-KIT3P70 Type III
CC25-LED-KIT4P70 Type IV
CC25-LED-KIT5P70 Type V
CC25-LED-KITLP70 One Way, Left
CC25-LED-KITRP70 One Way, Right
PICOPRISM LED UPGRADE KIT
The Archetype (AR) Shown
WARP9 Large 350mA
WP9L-LED-KIT1P35 Type I
WP9L-LED-KIT2P35 Type II
WP9L-LED-KIT3P35 Type III
WP9L-LED-KIT4P35 Type IV
WP9L-LED-KIT5P35 Type V
WP9L-LED-KITLP35 One Way, Left
WP9L-LED-KITRP35 One Way, Right
WARP9 Large 700mA
WP9L-LED-KIT1P70 Type I
WP9L-LED-KIT2P70 Type II
WP9L-LED-KIT3P70 Type III
WP9L-LED-KIT4P70 Type IV
WP9L-LED-KIT5P70 Type V
WP9L-LED-KITLP70 One Way, Left
WP9L-LED-KITRP70 One Way, Right
ELECTRICAL MODULE
Source
120L 120 LEDs,
132W for 350mA WP9L
96L 96 LEDs,
106W for 350mA CC25
219W for 700mA CC25
80L 80 LEDs,
92W for 350mA AR/STL/ET
184-188W for 700mA AR/STL/ET
Color Temp.
2K 580nm
3K 3000K
4K 4200K
5K 5100K
Voltages
120V
208V
240V
277V
347V
480V
120
208
240
277
347
480
Note: Refer to LED Upgrade Kit Spec Sheets
for complete ordering information
Consult DLC Website for current qualified
product listings.
PICOPRISM LED UPGRADE KIT
WARP9 (WP9L) Shown
Back
Front
Drilling Template
Electrical Module
LED EmitterDeck
LED EmitterDeck
Electrical Module
221
HID to LED Upgrade Kit PicoEmitter
™
WP9S/SAR/STS/SET/CC17/SRS1/NSL/BNS/RA17/BE17/AE17/LE19/WD14
FEATURES
•
LED UPGRADE KIT
•
•
•
•
•
•
•
Reduces energy consumption up to 50% compared to original HID source
350mA current
Maintains architectural relevance, application integrity and extends asset value
0-10V dimming interface, allowing 0-100% illumination output options
Full palette of lighting distributions and color temperatures to match
existing installations
Preserves applicable UL/CUL/ETL product listing and manufacturer’s warranty
Compatible driver options for renewable energy systems
Qualifies for many rebates and tax incentives
ORDERING INFORMATION (Example)
WP9S-LED-KIT3E35
CATALOG NUMBER
WARP9 Small
WP9S-LED-KIT1E35 Type I
WP9S-LED-KIT2E35 Type II
WP9S-LED-KIT3E35 Type III
WP9S-LED-KIT4E35 Type IV
WP9S-LED-KIT5E35 Type V
WP9S-LED-KITLE35 One Way, Left
WP9S-LED-KITRE35 One Way, Right
The Archetype Small
SAR-LED-KIT1E35 Type I
SAR-LED-KIT2E35 Type II
SAR-LED-KIT3E35 Type III
SAR-LED-KIT4E35 Type IV
SAR-LED-KIT5E35 Type V
SAR-LED-KITLE35 One Way, Left
SAR-LED-KITRE35 One Way, Right
Structural Small
STS-LED-KIT1E35 Type I
STS-LED-KIT2E35 Type II
STS-LED-KIT3E35 Type III
STS-LED-KIT4E35 Type IV
STS-LED-KIT5E35 Type V
STS-LED-KITLE35 One Way, Left
STS-LED-KITRE35 One Way, Right
The Entablature Small
SET-LED-KIT1E35 Type I
SET-LED-KIT2E35 Type II
SET-LED-KIT3E35 Type III
SET-LED-KIT4E35 Type IV
SET-LED-KIT5E35 Type V
SET-LED-KITLE35 One Way, Left
SET-LED-KITRE35 One Way, Right
60L5K240
Curvilinear Small
CC17-LED-KIT1E35 Type I
CC17-LED-KIT2E35 Type II
CC17-LED-KIT3E35 Type III
CC17-LED-KIT4E35 Type IV
CC17-LED-KIT5E35 Type V
CC17-LED-KITLE35 One Way, Left
CC17-LED-KITRE35 One Way, Right
Solitaire Small
SRS1-LED-KIT1E35 Type I
SRS1-LED-KIT2E35 Type II
SRS1-LED-KIT3E35 Type III
SRS1-LED-KIT4E35 Type IV
SRS1-LED-KIT5E35 Type V
SRS1-LED-KITLE35 One Way, Left
SRS1-LED-KITRE35 One Way, Right
NeoSphere
NSL-LED-KIT3E35 Type III
NSL-LED-KIT5E35 Type V
Bounce
Type I
Type II
Type III
Type IV
Type V
One Way, Left
One Way, Right
BNS-LED-KIT1E35
BNS-LED-KIT2E35
BNS-LED-KIT3E35
BNS-LED-KIT4E35
BNS-LED-KIT5E35
BNS-LED-KITLE35
BNS-LED-KITRE35
Era Small
RA17-LED-KIT1E35 Type I
RA17-LED-KIT2E35 Type II
RA17-LED-KIT3E35 Type III
RA17-LED-KIT4E35 Type IV
RA17-LED-KIT5E35 Type V
RA17-LED-KITLE35 One Way, Left
RA17-LED-KITRE35 One Way, Right
Era Bell Small
BE17-LED-KIT1E35 Type I
BE17-LED-KIT2E35 Type II
BE17-LED-KIT3E35 Type III
BE17-LED-KIT4E35 Type IV
BE17-LED-KIT5E35 Type V
BE17-LED-KITLE35 One Way, Left
BE17-LED-KITRE35 One Way, Right
Era Acorn Small
AE17-LED-KIT1E35 Type I
AE17-LED-KIT2E35 Type II
AE17-LED-KIT3E35 Type III
AE17-LED-KIT4E35 Type IV
AE17-LED-KIT5E35 Type V
AE17-LED-KITLE35 One Way, Left
AE17-LED-KITRE35 One Way, Right
Era Lantern Small
Type I
Type II
Type III
Type IV
Type V
One Way, Left
One Way, Right
LE19-LED-KIT1E35
LE19-LED-KIT2E35
LE19-LED-KIT3E35
LE19-LED-KIT4E35
LE19-LED-KIT5E35
LE19-LED-KITLE35
LE19-LED-KITRE35
LED UPGRADE KIT WITH DRILLING TEMPLATES
The Archetype (SAR) Shown
Wall Director Small
WD14-LED-KIT2E35 Type II
WD14-LED-KIT3E35 Type III
WD14-LED-KIT4E35 Type IV
WD14-LED-KIT5E35 Type V
WD14-LED-KITLE35 One Way, Left
WD14-LED-KITRE35 One Way, Right
ELECTRICAL MODULE
Color Temp.
Source
60L 60 LEDs, 2K 580nm
64-68W
3K 3000K
4K 4200K
5K 5100K
Note: Refer to LED Upgrade Kit Spec Sheets
for complete ordering information
Consult DLC Website for current qualified
product listings.
LED UPGRADE KIT WITHOUT DRILLING TEMPLATES
Era (RA17) Shown
Electrical Module
Front
Back
LED EmitterDeck
222
Drilling Templates
LED EmitterDeck
Voltages
120V
208V
240V
277V
347V
480V
120
208
240
277
347
480
Electrical Module
HID to LED Upgrade Kit PicoEmitter
™
WP9L/AR/STL/ET/CC21/RA25/BE21/AE21/WD18
FEATURES
•
•
•
•
•
•
•
Reduces energy consumption up to 50% compared to original HID source
350mA current
Maintains architectural relevance, application integrity and extends asset value
0-10V dimming interface, allowing 0-100% illumination output options
Full palette of lighting distributions and color temperatures to match
existing installations
Preserves applicable UL/CSA/ETL product listing and manufacturer’s warranty
Compatible driver options for renewable energy systems
Qualifies for many rebates and tax incentives
LED UPGRADE KIT
•
ORDERING INFORMATION (Example)
WP9L-LED-KIT3E35
CATALOG NUMBER
WARP9 Large
WP9L-LED-KIT1E35 Type I
WP9L-LED-KIT2E35 Type II
WP9L-LED-KIT3E35 Type III
WP9L-LED-KIT4E35 Type IV
WP9L-LED-KIT5E35 Type V
WP9L-LED-KITLE35 One Way, Left
WP9L-LED-KITRE35 One Way, Right
The Archetype Large
AR-LED-KIT1E35 Type I
AR-LED-KIT2E35 Type II
AR-LED-KIT3E35 Type III
AR-LED-KIT4E35 Type IV
AR-LED-KIT5E35 Type V
AR-LED-KITLE35 One Way, Left
AR-LED-KITRE35 One Way, Right
Structural Large
STL-LED-KIT1E35 Type I
STL-LED-KIT2E35 Type II
STL-LED-KIT3E35 Type III
STL-LED-KIT4E35 Type IV
STL-LED-KIT5E35 Type V
STL-LED-KITLE35 One Way, Left
STL-LED-KITRE35 One Way, Right
The Entablature Large
ET-LED-KIT1E35 Type I
ET-LED-KIT2E35 Type II
ET-LED-KIT3E35 Type III
ET-LED-KIT4E35 Type IV
ET-LED-KIT5E35 Type V
ET-LED-KITLE35 One Way, Left
ET-LED-KITRE35 One Way, Right
120L5K240
Curvilinear Large
CC21-LED-KIT1E35 Type I
CC21-LED-KIT2E35 Type II
CC21-LED-KIT3E35 Type III
CC21-LED-KIT4E35 Type IV
CC21-LED-KIT5E35 Type V
CC21-LED-KITLE35 One Way, Left
CC21-LED-KITRE35 One Way, Right
Era Large
RA25-LED-KIT1E35 Type I
RA25-LED-KIT2E35 Type II
RA25-LED-KIT3E35 Type III
RA25-LED-KIT4E35 Type IV
RA25-LED-KIT5E35 Type V
RA25-LED-KITLE35 One Way, Left
RA25-LED-KITRE35 One Way, Right
Era Bell Large
BE21-LED-KIT1E35 Type I
BE21-LED-KIT2E35 Type II
BE21-LED-KIT3E35 Type III
BE21-LED-KIT4E35 Type IV
BE21-LED-KIT5E35 Type V
BE21-LED-KITLE35 One Way, Left
BE21-LED-KITRE35 One Way, Right
Era Acorn Large
AE21-LED-KIT1E35 Type I
AE21-LED-KIT2E35 Type II
AE21-LED-KIT3E35 Type III
AE21-LED-KIT4E35 Type IV
AE21-LED-KIT5E35 Type V
AE21-LED-KITLE35 One Way, Left
AE21-LED-KITRE35 One Way, Right
Wall Director Large
WD18-LED-KIT2E35 Type II
WD18-LED-KIT3E35 Type III
WD18-LED-KIT4E35 Type IV
WD18-LED-KIT5E35 Type V
WD18-LED-KITLE35 One Way, Left
WD18-LED-KITRE35 One Way, Right
ELECTRICAL MODULE
Color Temp.
Source
2K 580nm
120L 120 LEDs,
126-133W
3K 3000K
96L 96 LEDs,
4K 4200K
103W for ET
5K 5100K
Voltages
120V
208V
240V
277V
347V
480V
120
208
240
277
347
480
Note: Refer to LED Upgrade Kit Spec Sheets
for complete ordering information
Consult DLC Website for current qualified
product listings.
LED UPGRADE KIT WITH DRILLING TEMPLATES
The Archetype (AR) Shown
LED UPGRADE KIT WITHOUT DRILLING TEMPLATES
Era (RA25) Shown
Front
Back
Drill ng Templates
LED EmitterDeck
Electrical Module
LED EmitterDeck
Electrical Module
223
ALTITUDE
™
ALT60, ALT96, ALT120, ALT180, ALT240, ALT300 LED Luminaire
ALT300
FEATURES
S I T E / R OA D WAY
ALT240
ALT180
ALT120
•
The ultimate in LED luminaire design featuring innovative engineering,
thermal management and unique patented1 PicoPrism™ optics
•
Proportional and scalable aesthetic housing, available in six sizes to cover
more environments than ever before
•
WiHUBB features on/off/variable and step dimming
control, SNAP protocol mesh network, AES-128 encryption
detection, occupancy sensor interface and intuitive,
user-friendly software
ALT96
ALT60
ORDERING. INFORMATION (Example)
1SA
120L5K277
ALT3P35
MOUNTING
1SA
2SB
2SL
3ST
3SY*
4SC
1W
EPA
ALT60
ALT96
ALT120
1 Arm Side Mt. 0.58 0.64 0.72
2 Arm Side Mt. 1.17 1.28 1.44
2 Arm Side Mt. 0.91 0.97 1.05
3 Arm Side Mt. 1.50 1.61 1.77
3 Arm Side Mt. 1.50 1.61 1.77
4 Arm Side Mt. 1.66 1.78 1.93
Single Wall Mt. n/a
n/a
WH SF/A26
FIXTURE OPTIONS
1SW Wall Mounting
SF 120 Volt Single Fuse
DF 208 Volt Double Fuse
DF 240 Volt Double Fuse
SF 277 Volt Single Fuse
SF 347 Volt Single Fuse
DF 480 Volt Double Fuse
A26 Photocell Receptacle
FGL Flat Glass Lens
FPL Flat Polycarbonate Lens6
NFO Type III or IV
ELECTRICAL MODULE
Source
60L 60 LEDs
96L 96 LEDs
120L 120 LEDs
180L 180 LEDs
240L 240 LEDs
300L 300 LEDs2
Color Temperature3
2K 580nm4
3K 3000K
4K 4200K
5K 5100K
Voltages
120 120V
208 208V
240 240V
277 277V
347 347V5
480 480V5
n/a
*Available round poles only. EPA is for Fixture only
FIXTURE FINISH
SG Stealth Gray
BL Black
DB Dark Bronze
LG Light Gray
PS Platinum Silver
WH White
CC Custom Color*
FIXTURE
Distribution
ALT1 Type I
ALT2 Type II
ALT3 Type III
ALT4 Type IV
ALT5 Type V
ALTR Type R, Right
ALTL Type L, Left
1
2
3
4
5
6
Current
P35 350mA PicoPrism
P70 700mA PicoPrism
PRA20-4188SA/WH
SVSF-2SB
SVSF-2SL
SVSF-3ST
SVSF-4SC
(51 mm)
Speed Mount
Adapter
224
9L"
(248 mm)
4 fixtures side mt. 90°
2 fixtures side mt. 180°
2 fixtures side mt. 90°
3 fixtures side mt. 90°
4 fixtures side mt. 90°
4B"
(105 mm)
FRONT
TOP
3E"
(98 mm)
ALT180/ALT240/ALT300
ALT300 – Approx. Wt. = 67 lbs.
42L"
4B"
(1086 mm)
(105 mm)
25"
25"
(635 mm)
2"
(51 mm)
Speed Mount
Adapter
3 fixtures side mt. 120°5
SIDE
(933 mm)
25"
(635 mm)
2"
(51 mm)
Speed Mount
Adapter
3 fixtures side mt. 90°
17"
SIDE
(248 mm)
2 fixtures side mt. 90°
(432 mm)
2"
(51 mm)
Speed Mount
Adapter
TOP
ALT240 – Approx. Wt. = 55 lbs.
36L"
9L"
(826 mm)
2 fixtures side mt. 180°
ALT60/ALT96/ALT120
(768 mm)
17"
SIDE
ALT180 – Approx. Wt. = 49 lbs.
32K"
9L"
(248 mm)
(197 mm)
(432 mm)
2"
(51 mm)
Speed Mount
Adapter
TOP
ALT120 – Approx. Wt. = 34 lbs.
30J"
7L"
(680 mm)
17"
(432 mm)
2"
4” Round, Standard Fixtures
1 fixture side mt.
VSF-1SA
VSF-2SB
VSF-2SL
VSF-3ST
VSF-3SY
VSF-4SC
Consult DLC Website for current qualified
product listings.
ALT96 – Approx. Wt. = 30 lbs.
7L"
26L"
(197 mm)
(591 mm)
SLIPFITTER MOUNTING OPTIONS
HORIZONTAL
HSF Horizontal Slipfitter Mount
VERTICAL
4” Square, Standard Fixtures
SVSF-1SA 1 fixture side mt.
US Patent No. D674,965 S. Other patents pending.
300L available in 350mA only.
For custom optics and color temperature configurations, contact factory.
Turtle friendly
347V & 480V currents may be supplied with step-down transformer.
Use only when vandalism is anticipated to be high. Required only for vandal
protection in locations where fixtures can be reached by unauthorized persons.
(197 mm)
POLE
See Arms & Poles Selection
Guide at www.kimlighting.com
for pole EPA & ordering.
Neighbor Friendly Optic
WIH-IM In-Fixture wireless
control module
*Consult representative
ALT60 – Approx. Wt. = 27 lbs.
23J"
7L"
—
(635 mm)
2"
(51 mm)
Speed Mount
Adapter
TOP
TOP
TOP
SIDE
SIDE
SIDE
FRONT
3E"
(98 mm)
WARP9 LED with PicoPrism
™
™
Small & Large Luminaire
WP9LP-LED
FEATURES
LED Picoprism™ technology
•
Patented design, incorporating visual stealth technology
•
Sealed optical module, IP-66 rated
S I T E / R OA D WAY
•
WP9SP-LED
Features exclusive wiHUBB technology
•
Wireless system with a 0 - 10V dimming interface
with a dimming range of 10 - 100%
ORDERING. INFORMATION (Example)
1SA
MOUNTING
1SA
2SB
2SL
3ST
3SY1
4SC
1W*
EPA
WP9SP
1 Arm Side Mt. 0.52
WP9LP
0.95
2 Arm Side Mt. 1.04
1.9
2 Arm Side Mt. 0.82
1.47
3 Arm Side Mt. 1.3
2.5
3 Arm Side Mt. 1.3
2.5
4 Arm Side Mt. 1.5
2.7
Single Wall Mt. n/a
n/a
*Wall Mounting: A cast-aluminum
mounting plate is mounted to the
wall with four bolts (by others).
Fixture and arm are mounted to
the cast aluminum cover plate
before attaching to the wall
mounting plate.
NOTE: EPA is for Fixture only
1
2
3
4
60L5K120
WP9S1P70
3Y only available on round slipfitter.
Driver has a 0-10V dimming interface
with a dimming range of 10-100%.
Compatible with most control systems.
Due to current unavailability of 347V
& 480V drivers, specification of these
voltages may feature an integral stepdown transformer.
Required only for vandal protection in
locations where fixtures can be reached
by unauthorized persons.
Distribution
Current
WP9S1 Type I
P35 350mA PicoPrism
WP9S2 Type II
P70 700mA PicoPrism
WP9S3 Type III
WP9S4 Type IV
WP9S5 Type V
WP9SR Type R Right
WP9SL Type L Left
WP9L1 Type I
WP9L2 Type II
WP9L3 Type III
WP9L4 Type IV
WP9l5 Type V
WP9LR Type R Right
WP9LL Type L Left
POLE
277, 347V
A-25
LS
TL
WIH-IM
SCL
SCH
Voltages
120 120V
208 208V
240 240V
277 277V
347 347V3
480 480V3
WP9SP
—
See Arms & Poles Selection
Guide at www.kimlighting.com
for pole EPA & ordering.
DF Double Fuse for 208,
ELECTRICAL MODULE2
Color Temperature
60L 60 LEDs, 131W 2K 580nm580nm
For WP9SP
3K 3000K
120L 120 LEDs, 270W 4K 4200K
For WP9LP
5K 5100K
PRA12-5125SA/SG
SF/A-25
FIXTURE OPTIONS
NFO Neighbor Friendly Optic
SF Single Fuse for 120,
FIXTURE
Source
SG
SLIPFITTER MOUNTING OPTIONS
HORIZONTAL
HSF Horizontal Slipfitter Mount
VERTICAL
240 480V
WP9L Photocell
Receptacle
Polycarbonate Lens4
Tamper-Resistant Latch4
In-Fixture wireless
control module
Occupancy Sensor up
to 16’ ht.
Occupancy Sensor up
to 30’ ht.
4” Round, Standard Fixtures
1 fixture side mt.
VSF-1SA
VSF-2SB
VSF-2SL
VSF-3ST
VSF-3SY
VSF-4SC
FIXTURE FINISH
BL Black
DB Dark Bronze
SG Stealth Gray
PS Platinum Silver
WH White
CC Custom Color*
2 fixtures side mt. 180°
2 fixtures side mt. 90°
3 fixtures side mt. 90°
3 fixtures side mt. 120°
4 fixtures side mt. 90°
4” Square, Standard Fixtures
SVSF-1SA 1 fixture side mt.
SVSF-2SB
SVSF-2SL
SVSF-3ST
SVSF-4SC
*Consult representative
2 fixtures side mt. 180°
2 fixtures side mt. 90°
3 fixtures side mt. 90°
4 fixtures side mt. 90°
Note: HID to LED Upgrade Kits available.
Contact factory.
Consult DLC Website for current qualified
product listings.
WP9LP
TOP
TOP
26I"
5A"
(684 mm)
(129 mm)
8I"
(227 mm)
SIDE
1"
35B"
6E"
(892 mm)
(175 mm)
5N"
8I"
10M"
10M"
(227 mm)
(262 mm)
(141 mm)
SIDE
(25 mm)
(25 mm)
1K"
(38 mm)
4G"
FRONT
(113 mm)
15"
1I"
(49 mm)
5I"
(262 mm)
(151 mm)
5B"
FRONT
(130 mm)
20"
(381 mm)
1"
(508 mm)
BOTTOM
BOTTOM
225
WARP9 LED with PicoEmitter
™
™
Small & Large Luminaire
FEATURES
S I T E / R OA D WAY
WP9LE-LED
WP9SE-LED
•
LED PicoEmitter™ technology
•
Patented design, incorporating visual stealth technology
•
Sealed optical chamber, IP-66 rated
Features exclusive wiHUBB technology
•
Wireless system with a 0 - 10V dimming interface
with a dimming range of 10 - 100%
ORDERING. INFORMATION (Example)
1SA
MOUNTING
1SA
2SB
2SL
3ST
3SY1
4SC
1W*
EPA
WP9S
0.95
2 Arm Side Mt. 1.04
1.9
2 Arm Side Mt. 0.82
1.47
WP9S2 Type II
3 Arm Side Mt. 1.3
2.5
WP9S3 Type III
2
3
4
E35 350mA PicoEmitter
WP9S1 Type I
277, 347V
DF Double Fuse for 208,
2.5
WP9S4 Type IV
4 Arm Side Mt. 1.5
2.7
Single Wall Mt. n/a
n/a
WP9S5 Type V
WP9SR Type R Right
240 480V
Photocell Receptacle
120V Photocell Button
208V Photocell Button
240V Photocell Button
277V Photocell Button
347V Photocell Button
480V Photocell Button
Polycarbonate Lens4
Tamper-Resistant Latch4
In-Fixture wireless
control module
SCL Occupancy Sensor
up to 16’ ht.
SCH Occupancy Sensor
up to 30’ ht.
A-25
A-30
A-31
A-32
A-33
A-35
A-34
LS
TL
WIH-IM
WP9SL Type L Left
WP9L1 Type I
WP9L2 Type II
WP9L3 Type III
WP9L4 Type IV
WP9L5 Type V
WP9LR Type R Right
3Y only available on round slipfitter.
Driver has a 0-10V dimming interface
with a dimming range of 10-100%.
Compatible with most control systems.
Due to current unavailability of 347V
& 480V drivers, specification of these
voltages may feature an integral stepdown transformer.
Required only for vandal protection
in locations where fixtures can be
reached by unauthorized persons.
PRA12-5125SA/SG
SF/A-25
FIXTURE OPTIONS
NFO Neighbor Friendly Optic
SF Single Fuse for 120,
Current
Distibution
1 Arm Side Mt. 0.52
3 Arm Side Mt. 1.3
SG
FIXTURE
WP9L
*Wall Mounting: A cast-aluminum
mounting plate is mounted to the
wall with four bolts (by others).
Fixture and arm are mounted to
the cast aluminum cover plate
before attaching to the wall
mounting plate.
NOTE: EPA is for Fixture only
1
60L5K120
WP9S1E35
WP9LL Type L Left
ELECTRICAL MODULE
2
Source
60L 60 LEDs, 65W
Color Temperature
2K 580nm580nm
For WP9SE
3K 3000K
120L 120 LEDs, 130W 4K 4200K
For WP9LE
5K 5100K
WP9SE
Voltages
120V
208V
240V
277V
347V3
480V3
120
208
240
277
347
480
FIXTURE FINISH
BL Black
DB Dark Bronze
SG Stealth Gray
PS Platinum Silver
WH White
CC Custom Color*
SLIPFITTER MOUNTING OPTIONS
HORIZONTAL
HSF Horizontal Slipfitter Mount
VERTICAL
4” Round, Standard Fixtures
1 fixture side mt.
VSF-1SA
VSF-2SB
VSF-2SL
VSF-3ST
VSF-3SY
VSF-4SC
2 fixtures side mt. 180°
2 fixtures side mt. 90°
3 fixtures side mt. 90°
3 fixtures side mt. 120°
4 fixtures side mt. 90°
4” Square, Standard Fixtures
SVSF-1SA 1 fixture side mt.
SVSF-2SB
SVSF-2SL
SVSF-3ST
SVSF-4SC
2 fixtures side mt. 180°
2 fixtures side mt. 90°
3 fixtures side mt. 90°
4 fixtures side mt. 90°
Note: HID to LED Upgrade Kits available.
Contact factory.
Consult DLC Website for current qualified
product listings.
*Consult representative
TOP
TOP
26I"
8I"
(227 mm)
SIDE
1"
35B"
6E"
(684 mm)
(129 mm)
(892 mm)
(175 mm)
5N"
8I"
10M"
10M"
(227 mm)
(262 mm)
(141 mm)
SIDE
1"
(25 mm)
(25 mm)
1K"
5I"
(262 mm)
(151 mm)
1I"
(38 mm)
4G"
FRONT
(49 mm) FRONT
5B"
(113 mm)
15"
(130 mm)
20"
(381 mm)
(508 mm)
Lens shall be clear glass
BOTTOM
226
POLE
See Arms & Poles Selection
Guide at www.kimlighting.com
for pole EPA & ordering.
WP9LE
5A"
—
Lens shall be clear glass
BOTTOM
The Archetype LED with PicoPrism
®
™
SAR Small and AR Large Luminaire
FEATURES
AR LED
LED PicoPrism technology
•
Efficient, effective downward control of light with full uplight cutoff
•
IES Type II, III, IV, V, and One-Way L or R Full-Cutoff distribution patterns
•
Easy-access, tool-less latches for lower maintenance
S I T E / R OA D WAY
•
SAR LED
Features exclusive wiHUBB technology
•
Wireless system for 0-10VDC full range dimming control
•
Programmable autonomous operation
ORDERING. INFORMATION (Example)
1SA
SAR3P35
EPA
MOUNTING
1SA 1 Arm Side Mt. 0.7
2SB 2 Arm Side Mt. 1.4
2SL 2 Arm Side Mt. 1.2
3ST 3 Arm Side Mt. 1.9
3SY1 3 Arm Side Mt. 1 9
4SC 4 Arm Side Mt. 2 5
1A 1 Arm Side Mt. 1.2
2B 2 Arm Side Mt. 2.4
2L 2 Arm Side Mt. 2.0
3T 3 Arm Side Mt. 3.2
3Y1 3 Arm Side Mt. 3 2
4C 4 Arm Side Mt. 3 9
1W2 Single Wall Mt. n/a
NOTE: EPA is for Fixture only
60L5K120
SG
FIXTURE FINISH
BL Black
DB Dark Bronze
LG Light Gray
SG Stealth Gray
PS Platinum Silver
WH White
CC Custom Color*
FIXTURE OPTIONS
A-25 AR photocell
A-30 120V SAR photocell
A-31 208V SAR photocell
A-32 240V SAR photocell
A-33 277V SAR photocell
A-34 480V SAR photocell
A-35 347V SAR photocell
SF Single Fuse for 120,
*Consult representative
ELECTRICAL MODULE
3
Source
Color Temp.
2K 580nm
40L 40 LEDs,
45W for 350mA, 3K 3000K
93W for 700mA 4K 4200K
SAR LED
5K 5100K
80L 80 LEDs,
92W for 350mA,
188W for 700mA
AR LED
Voltages
120 120V
208 208V
240 240V
277 277V
347 347V4
480 480V4
SAR2
SAR3
SAR4
SAR5
SARR
SARL
1
2
3
Type II
Type III
Type IV
Type V
Type R
Type L
POLE / POLE ARM
SLIPFITTER MOUNTING OPTIONS
VERTICAL
4” Round, Standard Fixtures
VSF-1SA 1 fixture side mt.
277, 347V
VSF-2SB
VSF-2SL
VSF-3ST
VSF-3SY
VSF-4SC
240, 480V
NFO Neigbor Friendly Optic
TL Tamper Resistant Latch5
WIH-IM In-Fixture wireless
control module
2 fixtures side mt. 180°
2 fixtures side mt. 90°
3 fixtures side mt. 90°
3 fixtures side mt. 120°
4 fixtures side mt. 90°
SCL Occupancy Sensor up to
4” Square, Standard Fixtures
SVSF-1SA 1 fixture side mt.
SCH Occupancy Sensor up to
SVSF-2SB
SVSF-2SL
SVSF-3ST
SVSF-4SC
16’ ht.
30’ ht.
Current
PRA12-5125SA/SG
See Arms & Poles Selection
Guide at www.kimlighting.com
for pole EPA & ordering.
DF Double Fuse for 208,
FIXTURE
Distribution
Type II AR2
Type III AR3
Type IV AR4
Type V
AR5
Type R
ARR
Type L
ARL
VSF-1SA
A-30
P35 350mA PicoPrism
P70 700mA PicoPrism
2 fixtures side mt. 180°
2 fixtures side mt. 90°
3 fixtures side mt. 90°
4 fixtures side mt. 90°
HORIZONTAL
HSF for Pole Davit Arm
3Y only available on round slipfitter.
Junction box in wall must provide adequate fixture
support.
Driver has a 0-10V dimming interface with a dimming
range of 10-100%. Compatible with most control
systems.
4
5
Due to current unavailability of 347V and 480V
drivers, specification of these voltages may feature an
integral step-down transformer.
Required only for vandal protection in locations where
fixtures can be reached by unauthorized persons.
Note: HID to LED Upgrade Kits available.
Contact factory.
Consult DLC Website for current qualified
product listings.
THE ARCHETYPE AR LARGE
THE ARCHETYPE SAR SMALL
TOP
TOP
5"
8"
6"
(152 mm)
FRONT
8"
(203 mm)
(127 mm)
SIDE
17B"
(432 mm)
1L"
(25 mm)
(203 mm)
4J"
(102 mm)
FRONT
SIDE
22K"
ARM
CROSS SECTION
(559 mm)
2"
(51 mm)
6"
(152 mm)
ARM
CROSS SECTION
16"
12"
(406 mm)
(305 mm)
BOTTOM
BOTTOM
227
The Archetype LED with PicoEmitter
®
™
SAR Small and AR Large Luminaire
FEATURES
S I T E / R OA D WAY
AR LED
SAR LED
•
LED PicoEmitter™ technology
•
Efficient, effective downward control of light with full uplight cutoff
•
IES Type II, III, IV, V, and One-Way L or R distribution patterns
•
Easy-access, tool-less latches for lower maintenance
Features exclusive wiHUBB technology
•
Wireless system for 0-10VDC full range dimming control
•
Programmable autonomous operation
ORDERING. INFORMATION (Example)
1SA
SAR3E35
60L5K120
SG
FIXTURE FINISH
BL Black
DB Dark Bronze
LG Light Gray
SG Stealth Gray
PS Platinum Silver
WH White
CC Custom Color*
EPA
MOUNTING
1SA 1 Arm Side Mt. 0.7
2SB 2 Arm Side Mt. 1.4
2SL 2 Arm Side Mt. 1.2
3ST 3 Arm Side Mt. 1.9
3SY1 3 Arm Side Mt. 1.9
4SC 4 Arm Side Mt. 2.5
1A 1 Arm Side Mt. 1.2
2B 2 Arm Side Mt. 2.4
2L 2 Arm Side Mt. 2.0
3T 3 Arm Side Mt. 3.2
3Y1 3 Arm Side Mt. 3.2
4C 4 Arm Side Mt. 3.9
1W2 Single Wall Mt. n/a
Source
Color Temp.
2K 580nm
60L 60 LEDs, 66W
For SAR LED
3K 3000K
120L 120 LEDs, 130W 4K 4200K
For AR LED
5K 5100K
VERTICAL
4” Round, Standard Fixtures
VSF-1SA 1 fixture side mt.
Voltages
120 120V
208 208V
240 240V
277 277V
347 347V4
480 480V4
E35 350mA PicoEmitter
Type II
Type III
Type IV
Type V
Type R
Type L
1
2
3
4
5
VSF-2SB
VSF-2SL
VSF-3ST
VSF-3SY
VSF-4SC
TOP
SVSF-2SB
SVSF-2SL
SVSF-3ST
SVSF-4SC
TOP
5"
8"
8"
SIDE
17B"
(432 mm)
1L"
(25 mm)
(203 mm)
4J"
(102 mm)
FRONT
SIDE
22K"
ARM
CROSS SECTION
(559 mm)
16"
12"
(406 mm)
(305 mm)
BOTTOM
BOTTOM
3 fixtures side mt. 90°
3 fixtures side mt. 120°
4 fixtures side mt. 90°
2 fixtures side mt. 180°
2 fixtures side mt. 90°
3 fixtures side mt. 90°
4 fixtures side mt. 90°
Note: HID to LED Upgrade Kits available.
Contact factory.
Consult DLC Website for current qualified
product listings.
(203 mm)
6"
(152 mm)
2 fixtures side mt. 90°
HORIZONTAL
HSF for Pole Davit Arm
3Y only available on round slipfitter.
Junction box in wall must provide adequate fixture support.
Driver has a 0-10V dimming interface with a dimming range
of 10-100%. Compatible with most control systems.
Due to current unavailability of 347V and 480V drivers, specification
of these voltages may feature an integral step-down transformer.
Required only for vandal protection in locations where fixtures
can be reached by unauthorized persons.
(127 mm)
2 fixtures side mt. 180°
4” Square, Standard Fixtures
SVSF-1SA 1 fixture side mt.
THE ARCHETYPE AR LARGE
THE ARCHETYPE SAR SMALL
228
SLIPFITTER MOUNTING OPTIONS
240, 480V
NFO Neigbor Friendly Optic
TL Tamper Resistant Latch5
WIH-IM In-Fixture wireless
control module
SCL Occupancy Sensor up
to 16’ ht.
SCH Occupancy Sensor up
to 30’ ht.
Current
FRONT
POLE / POLE ARM
277, 347V
ELECTRICAL MODULE3
PRA12-5125SA/SG
See Arms & Poles Selection
Guide at www.kimlighting.com
for pole EPA & ordering.
DF Double Fuse for 208,
FIXTURE
SAR2
SAR3
SAR4
SAR5
SARR
SARL
FIXTURE OPTIONS
A-25 AR photocell
A-30 120V SAR photocell
A-31 208V SAR photocell
A-32 240V SAR photocell
A-33 277V SAR photocell
A-34 480V SAR photocell
A-35 347V SAR photocell
LS Polycarbonate Lens5
SF Single Fuse for 120,
*Consult representative
NOTE: EPA is for Fixture only
Distribution
Type II AR2
Type III AR3
Type IV AR4
Type V
AR5
Type R
ARR
Type L
ARL
VSF-1SA
A-30
2"
(51 mm)
6"
(152 mm)
ARM
CROSS SECTION
Solitaire LED with PicoEmitter
™
SRS1 Clear Acrylic Lens, Die-Cast Aluminum Top
FEATURES
SRS1
LED
LED PicoEmitter™ technology
•
Solitaire is a classic, yet relevant to current architecture styles
•
IES Type II, III, IV, V, and One-Way L or R full-cutoff distribution patterns
•
Sealed optical chamber, IP-66 rated
S I T E / R OA D WAY
•
Features exclusive wiHUBB technology
•
Wireless system for 0-10VDC full range dimming control
•
Programmable autonomous operation
ORDERING. INFORMATION (Example)
FM
60L5K120
SRS1H3E35
EPA
MOUNTING
FM Flush Mnt. 4" O.D. 1.5
Poles only
PT Pole Tenon Mnt.
1.5
2" Pipe-size Tenon
2SB Twin Mnt. 4" or 5" 4.25
O.D. Poles only
n/a
1W Single Wall Mt.
NOTE: EPA is for arm & Fixture
FIXTURE
Distribution
SRS1H1 Type I
SRS1H2 Type II
SRS1H3
SRS1H4
SRS1H5
SRS1HR
DB
FIXTURE FINISH
BL Black
DB Dark Bronze
LG Light Gray
SG Stealth Gray
PS Platinum Silver
WH White
CC Custom Color*
Current
E35 350mA
PicoEmitter
Type III
Type IV
Type V
Type R
Right
SRS1HL Type L
Left
*Consult representative
ELECTRICAL MODULE
4
Source
Color Temperature
60L 60 LEDs, 2K 580nm
67W
3K 3000K
4K 4200K
5K 5100K
1
Due to current unavailability of 347V and 480V
drivers, specification of these voltages may
feature an integral step-down transformer.
2
CAUTION: Use only when vandalism is anticipated
to be high. Useful life of lens is limited by UV
discoloration from sunlight.
3
4
Voltages
120V
208V
240V
277V
347V1
480V1
120
208
240
277
347
480
A-30
PRA12-4125FM/DB
FIXTURE OPTIONS
A-30 120 Volt photocell
A-31 208 Volt photocell
A-32 240 Volt photocell
A-33 277 Volt photocell
A-34 480 Volt photocell
A-35 347 Volt Photocell
WA White Acrylic Lens
CP Clear Polycarbonate
Lens2
WP White Polycarbonate
Lens2
WIH-IM In-Fixture wireless
control module
SF 120 Volt Single Fuse
DF
DF
SF
SF
DF
208 Volt Double Fuse
240 Volt Double Fuse
277 Volt Single Fuse
POLE
See Arms & Poles Selection
Guide at www.kimlighting.
com for pole EPA & ordering.
FIXTURE OPTIONS
SCL-R Pole Occupancy
Sensor up to 16’
ht., Round3
SCL-S Pole Occupancy
Sensor up to 16’
ht., Square3
SCH-R Pole Occupancy
Sensor up to 30’
ht., Round3
SCH-S Pole Occupancy
Sensor up to 30’
ht., Square3
NFO Neigbor Friendly
Optic
347 Volt Single Fuse
480 Volt Double Fuse
Specify pole diameter if round, voltage and
color, e.g. SCL-R4/277/BL.
Driver has a 0-10V dimming interface with a
dimming range of 10-100%. Compatible with
most control systems.
Consult DLC Website for current qualified
product listings.
18C" DIA
(467 mm)
15C" DIA
(391 mm)
8"
FM
(203 mm)
3N"
(91 mm)
26"
(660 mm)
4" O.D. extruded
aluminum pole
8"
(203 mm)
18"
(457 mm)
8B"
(206 mm)
Solitaire shown
on HA32S arm.
See p. 763 for other
support arm options.
PT
Pole with 2" pipe-size tenon
(2C" O.D. x 4K" min. length)
5J" DIA
(133 mm)
229
Bounce LED with PicoEmitter & MiniBounce LED
®
™
Pole and Wall Mounted Luminaires
FEATURES
S I T E / R OA D WAY
BNS1
LED
•
LED PicoEmitter™ technology on BNS1 only
•
Ideal for traditional or contemporary architecture requiring a European accent
•
MiniBounce is a smaller version of the popular Bounce Series for pole or wall
mounting at lower mounting heights
•
Sealed optical chamber, IP-66 rated
Features exclusive wiHUBB technology
•
Wireless system for 0-10VDC full range dimming control
•
Programmable autonomous operation
ORDERING. INFORMATION (Example)
BNS1H5E35
FM
MOUNTING
FM
PT
2SB
1W
EPA
Bounce
Flush Mnt. 4" O.D.
Poles only
Pole Tenon Mnt.
2" Pipe-size Tenon
Twin Mnt. 4" or 5"
O.D. Poles only
Single Wall Mt.
Mini-Bounce
FM Flush Mount
PT Pole Tenon Mt.
BL
ELECTRICAL MODULE5
Bounce
1.2
1.2
3.6
Source Color Temperature
60L 60 LEDs, 2K 580nm 580nm
66W
3K 3000K
4K 4200K
5K 5100K
Voltages
120V
208V
240V
277V
3471
480V1
120
208
240
277
347
480
n/a
1.0
1.0
2B Twin Mount
4C Quad Mount
1W Single Wall Mt.
60L5K120
3.0
4.5
n/a
FIXTURE FINISH
BL Black
DB Dark Bronze
LG Light Gray
SG Stealth Gray
PS Platinum Silver
WH White
CC Custom Color*
Voltages
UV Universal
Voltage from
120 to 277V
with a ±10%
tolerance
Bounce
Current
A-31
A-32
A-33
A-34
A-35
CGL
CP
SCL-R Pole Occupancy Sensor up to 16’
E35 350mA PicoEmitter
ht., Round4
SCL-S Pole Occupancy Sensor up to 16’
BNS1H2 Type II
BNS1H3 Type III
BNS1H4 Type IV
ht., Square
Mini-Bounce
BNM Round Type V
SCH-S Pole Occupancy Sensor up to 30’
2
ht., Square4
NFO Neigbor Friendly
Optic
E35 350mA
BOUNCE
4
5
(406 mm)
6K"
(165 mm)
3M"
(84 mm)
31J"
24D"
(794 mm)
(333 mm)
13K"
(343 mm)
23O"
8C"
(213 mm)
POST TOP
TENON
MOUNT
(605 mm)
8L"
(222 mm)
MOUNTING
PLATE
(475 mm)
Pole with
2" pipe size tenon
(2C" O D
x 4K" min length)
480 Volt Double Fuse
(113 mm)
8K" DIA
(216 mm)
(84 mm)
(122 mm)
347 Volt Single Fuse
4G"
18H"
4O"
(626 mm)
(305 mm)
3M"
(216 mm)
13B"
277 Volt Single Fuse
DF 240 Volt Double Fuse
SF 277 Volt Single Fuse
SF 347 Volt Single Fuse
(384 mm)
12" DIA
Reflective White
Ballast Cover
240 Volt Double Fuse
Note: HID to LED Upgrade Kits available.
Contact factory.
Consult DLC Website for current qualified
product listings.
8K" DIA
16G"
208 Volt Double Fuse
Convex Glass Lens
Black Ballast Cover
(305 mm)
(418 mm)
230
347 Volt photocell
BBC Dark-Sky compliant
12" DIA
16" DIA
(333 mm)
480 Volt photocell
15B" DIA
(787 mm)
13B"
277 Volt photocell
MINIBOUNCE
31" DIA
5" DIA
(127 mm)
240 Volt photocell
For full-cutoff distributions. Use with Black
or Dark Bronze fixtures only.
Specify pole diameter if round, voltage and
color, e.g. SCL-R4/277/BL.
Driver has a 0-10V dimming interface with a
dimming range of 10-100%. Compatible with
most control systems.
3
Due to current unavailability of 347V and 480V
drivers, specification of these voltages may
feature an integral step-down transformer.
CAUTION: Use only when vandalism is anticipated
to be high. Useful life of lens is limited by UV
discoloration from sunlight.
208 Volt photocell
Black Ballast Cover3
120 Volt Single Fuse
Flat Polycarbonate Lens2
Mini-Bounce
SF 120 Volt Single Fuse
HS Houseside Shield
DF 208 Volt Double Fuse
TG Textured Glass Lens
ht., Round4
Forward Throw
1
4
SCH-R Pole Occupancy Sensor up to 30’
BNS1H5 Type V Square
BBC
SF
DF
DF
SF
SF
DF
A-30 120 Volt photocell
A-30 120 Volt photocell
FIXTURE OPTIONS
Bounce
BNS1H1 Type I
POLE
See Arms & Poles Selection
Guide at www.kimlighting.com
for pole EPA & ordering.
FIXTURE OPTIONS
NOTE: EPA is for Fixture only
FIXTURE
PRA12-5125FM/BL
*Consult representative
Mini-Bounce
Color Temperature
Source
18L 18 LEDs 2K 580nm
27L 27 LEDs 3K 3000K
36L 36 LEDs 4K 4200K
5K 5100K
A-30
13B"
(333 mm)
5"
8C"
(127 mm)
(213 mm)
9G"
C
L
J-Box
3C" DIA
(86 mm)
(240 mm)
9F"
(233 mm)
WALL MOUNTED
9G"
(240 mm)
ARM
SECTION
Era LED with PicoEmitter
®
™
RA17 Small & RA25 Large Luminaire
FEATURES
RA25 LED
LED PicoEmitter™ technology
•
Era offers an alternative to rectilinear designs without compromising
illumination performance
•
Sealed optical chamber, IP-66 rated
S I T E / R OA D WAY
•
RA17 LED
Features exclusive wiHUBB technology
•
Wireless system for 0-10VDC full range dimming control
•
Programmable autonomous operation
ORDERING. INFORMATION (Example)
RA175
1A
MOUNTING
1A
2B
3Y
4C
1W
EPA
RA17
1 Arm Side Mt. 0.8
RA25
1.5
2 Arm Side Mt. 1.6
3.0
3 Arm Side Mt. 2.4
4.5
4 Arm Side Mt. 2.8
5.2
Single Wall Mt. n/a
n/a
E35
60L5K120
CURRENT
E35 350mA PicoEmitter
NOTE: EPA is for Fixture only
FIXTURE
RA171 Type I Full Cutoff
RA172 Type II Full Cutoff
RA173 Type III Full Cutoff
RA174 Type IV Full Cutoff
RA175 Type V Square Full Cutoff
RA17R Type R Right Full Cutoff
RA17L Type L Left Full Cutoff
RA251 Type I Full Cutoff
RA252 Type II Full Cutoff
RA253 Type III Full Cutoff
RA254 Type IV Full Cutoff
RA255 Type V Square Full Cutoff
RA25R Type R Right Full Cutoff
RA25L Type L Left Full Cutoff
1
2
WH
A-30
FIXTURE FINISH
BL Black
DB Dark Bronze
LG Light Gray
SG Stealth Gray
PS Platinum Silver
WH White
CC Custom Color*
POLE / POLE ARM
See Arms & Poles Selection Guide at
www.kimlighting.com for pole EPA &
ordering.
1W Wall Mount arm not included and must
be ordered separately.
FIXTURE OPTIONS
*Consult representative
ELECTRICAL MODULE4
Source
60L 60 LEDs, 68W
For RA17
120L 120 LEDs, 126W
For RA25
Due to current unavailability of 347V and 480V drivers,
specification of these voltages may feature an integral
step-down transformer.
Use only in high-vandalism situations. Useful life is limited
by UV discoloration from sunlight.
3
4
Color Temperature
2K 580nm
3K 3000K
4K 4200K
5K 5100K
HSAF16-64188A-HA02S/WH
Voltages
120 120V
208 208V
240 240V
277 277V
347 347V1
480 480V1
A-30
A-30
A-31
A-32
A-33
A-34
A-35
LS
SF
DF
DF
SF
SF
DF
120 Volt photocell
120 Volt photocell
208 Volt photocell
240 Volt photocell
277 Volt photocell
WIH-IM In-Fixture wireless
control module
SCL-R Pole Occupancy Sensor
up to 16’ ht., Round3
SCL-S Pole Occupancy Sensor
up to 16’ ht., Square3
SCH-R Pole Occupancy Sensor
up to 30’ ht., Round3
347 Volt Photocell
Pole Occupancy Sensor
SCH-S
Polycarbonate Lens2
up to 30’ ht., Square3
120 Volt Single Fuse
NFO Neigbor Friendly Optic
208 Volt Double Fuse
480 Volt photocell
240 Volt Double Fuse
277 Volt Single Fuse
347 Volt Single Fuse
480 Volt Double Fuse
Specify pole diameter if round, voltage and color, e.g.
SCL-R4/277/BL.
Driver has a 0-10V dimming interface with a dimming range
of 10-100%. Compatible with most control systems.
Note: HID to LED Upgrade Kits available.
Contact factory.
Consult DLC Website for current qualified
product listings.
ERA RA17
ERA RA25
8"
6"
(203 mm)
(15
(152 mm)
22"
(559 mm)
16K"1
(419 mm)
(41
17"
(432 mm)
(43
25"
(635 mm)
231
Era Acorn /Era Bell LED with PicoEmitter
®
®
™
AE/BE17 Small & AE/BE21 Large Luminaire
S I T E / R OA D WAY
FEATURES
•
LED PicoEmitter™ technology
•
The Era Acorn retains the classic acorn-shaped enclosure, but in a clear
material that allows full optical performance with very low brightness
•
The Era Bell utilizes a flat glass lens for full-cutoff performance, satisfying
the most demanding light control specifications
AE LED
Features exclusive wiHUBB technology
BE LED
•
Wireless system for 0-10VDC full range dimming control
•
Programmable autonomous operation
ORDERING. INFORMATION (Example)
AE171E35
1A
MOUNTING
1A
2B
3Y
4C
1W
EPA
0.8
2 Arm Side Mt. 1.2
1.6
3 Arm Side Mt. 1.8
2.4
4 Arm Side Mt. 2.1
2.8
Single Wall Mt. n/a
n/a
WH
ELECTRICAL MODULE5
AE/BE17 AE/BE21
1 Arm Side Mt. 0.6
60L5K120
Source
Color Temperature
2K 580nm
3K 3000K
4K 4200K
5K 5100K
60L 60 LEDs, 68W
For AE/BE17
120L 120 LEDs, 126W
For AE/BE21
NOTE: EPA is for Fixture only
Voltages
120 120V
208 208V
240 240V
277 277V
347 347V1
480 480V1
Era Bell Distribution
Era Acorn Distribution
Type I Full Cutoff
Type II Full Cutoff
Type III Full Cutoff
Type IV Full Cutoff
Type V Square Full Cutoff
Type R Right Full Cutoff
Type L Left Full Cutoff
Type I Full Cutoff
Type II Full Cutoff
Type III Full Cutoff
Type IV Full Cutoff
Type V Square Full Cutoff
Type R Right Full Cutoff
Type L Left Full Cutoff
BE171
BE172
BE173
BE174
BE175
BE17R
BE17L
BE211
BE212
BE213
BE214
BE215
BE21R
BE21L
2
3
17" ERA ACORN
15C"
Type III Full Cutoff
Type IV Full Cutoff
Type V Square Full Cutoff
Type R Right Full Cutoff
Type L Left Full Cutoff
Type I Full Cutoff
Type II Full Cutoff
Type III Full Cutoff
Type IV Full Cutoff
Type V Square Full Cutoff
Type R Right Full Cutoff
Type L Left Full Cutoff
22E"
22E"
17J"
(438 mm)
17J"
17J"
(438 mm)
Era Acorn with optional
LS polycarbonate lens
5
Specify pole diameter if round, voltage and color, e.g.
SCL-R4/277/BL.
Driver has a 0-10V dimming interface with a dimming range
of 10-100%. Compatible with most control systems.
(438 mm)
21" ERA BELL
21" ERA ACORN
19M"
19M"
(490 mm)
(39 mm)
(582 mm)
4
19M"
15C"
(39 mm)
(582 mm)
232
POLE / POLE ARM
See Arms & Poles Selection Guide at
www.kimlighting.com for pole EPA &
ordering.
1W Wall Mount arm not included and must
be ordered separately.
FIXTURE OPTIONS
A-30 120 Volt photocell
SCL-R Pole Occupancy
Sensor up to 16’
A-31 208 Volt photocell
ht., Round4
240
Volt
photocell
A-32
SCL-S Pole Occupancy
Sensor up to 16’
A-33 277 Volt photocell
ht., Square4
A-34 480 Volt photocell
Pole Occupancy
SCH-R
A-35 347 Volt Photocell
Sensor up to 30’
ht., Round4
LS Polycarbonate Lens3
Pole
Occupancy
SCH-S
SF 120 Volt Single Fuse
Sensor up to 30’
208
Volt
Double
Fuse
DF
ht., Square4
DF 240 Volt Double Fuse WIH-IM In-Fixture wireless
control module
SF 277 Volt Single Fuse
NFO Neigbor Friendly
SF 347 Volt Single Fuse
Optic
DF 480 Volt Double Fuse
PicoEmitter
Type II Full Cutoff
17" ERA BELL
15C"
(39 mm)
Current
E35 350mA
Type I Full Cutoff
Due to current unavailability of 347V and 480V drivers,
specification of these voltages may feature an integral
step-down transformer.
For BE Era Bell only.
Use only in high-vandalism situations. Useful life is limited
by UV discoloration from sunlight.
1
FIXTURE FINISH
BL Black
DB Dark Bronze
LG Light Gray
SG Stealth Gray
PS Platinum Silver
WH White
CC Custom Color*
HSAS14-534188SA-HA11S/WH
*Consult representative
FIXTURE
AE171
AE172
AE173
AE174
AE175
AE17R
AE17L
AE211
AE212
AE213
AE214
AE215
AE21R
AE21L
A-30
(490 mm)
(490 mm)
28H"
28H"
21"
( 28 mm)
( 28 mm)
21"
(533 mm)
(533 mm)
21"
(533 mm)
Era Acorn with optional
LS polycarbonate lens
Note: HID to LED Upgrade Kits available.
Contact factory.
Consult DLC Website for current qualified
product listings.
Era Lantern LED with PicoEmitter
®
™
19” Bottom or Top Mount Luminaire
FEATURES
•
LED PicoEmitter™ technology
•
Heritage style meets modern full-cutoff performance
•
Three arm options; Single Straight, Single Curved, and Double Curved
•
Three decorative accent options; medallion with DC Arm, leaflets with SS Arm,
and top housing finial
LEB LED
Features exclusive wiHUBB technology
•
Wireless system for 0-10VDC full range dimming control
•
Programmable autonomous operation
S I T E / R OA D WAY
LET LED
LEB LED
ORDERING. INFORMATION (Example)
1A
LET
MOUNTING
FM
PT
1A
2B
3Y
4C
1W
EPA
19"
1.0
Flush Mt.
3E35
1 Arm Side Mt. 0.7
FIXTURE ARM
SS Single Straight Arm
SC Single Curved Arm
DC Double Curved Arm
3 Arm Side Mt. 2.1
4 Arm Side Mt. 2.4
Single Wall Mt. n/a
WH
LEAF/A-30
FIXTURE FINISH
BL Black
DB Dark Bronze
LG Light Gray
SG Stealth Gray
PS Platinum Silver
WH White
CC Custom Color*
LET Top Mt.
2 Arm Side Mt. 1.4
*Consult representative
ELECTRICAL MODULE3
Source
Color Temperature
60L 60 LEDs,
2K 580nm
67W
3K 3000K
4K 4200K
5K 5100K
Current
E35 350mA PicoEmitter
Type I Full Cutoff
60L5K120
SUPPORT
LEB Bottom Mt.
NOTE: EPA is for Fixture only
1
2
3
4
5
R
L
SS
SIZE
19 19” Dia.
Pipe Tenon Mt. 1.0
FIXTURE
Distribution
19
Type II Full Cutoff
Type III Full Cutoff
Type IV Full Cutoff
Type V Full Cutoff
Type R Right Full Cutoff
Type L Left Full Cutoff
Voltages
120V
208V
240V
277V
347V1
480V1
120
208
240
277
347
480
HSAS14-534188SA-HA11S/WH
POLE / POLE ARM
See Arms & Poles Selection Guide at www.
kimlighting.com for pole EPA & ordering.
1W Wall Mount arm not included and must be
ordered separately.
FIXTURE OPTIONS
LEAF Leaflets, top & bottom
of arm (SS only)
MDL Medallions, top of arm
(DC only)
TF Finial (bottom mt.
fixture only)
A-30 120 Volt photocell
A-31
A-32
A-33
A-34
A-35
NFO
208 Volt photocell
240 Volt photocell
277 Volt photocell
480 Volt photocell
347 Volt Photocell
Neigbor Friendly
Optic
SF
DF
DF
SF
SF
DF
SCL-R
120 Volt Single Fuse
208 Volt Double Fuse
240 Volt Double Fuse
277 Volt Single Fuse
347 Volt Single Fuse
480 Volt Double Fuse
Pole Occupancy
Sensor up to 16’
ht., Round2
SCL-S Pole Occupancy
Sensor up to 16’
ht., Square2
SCH-R Pole Occupancy
Sensor up to 30’
ht., Round2
SCH-S Pole Occupancy
Sensor up to 30’
ht., Square2
1
Due to current unavailability of 347V and 480V drivers,
specification of these voltages may feature an integral
step-down transformer.
2
Specify pole diameter if round, voltage and color, e.g.
SCL-R4/277/BL.
3
Driver has a 0-10V dimming interface with a dimming range
of 10-100%. Compatible with most control systems.
19" ERA
LANTERN
Note: HID to LED Upgrade Kits available.
Contact factory.
Consult DLC Website for current qualified
product listings.
19" DIA
(483 mm)
1011⁄32"
3K"
L"
L"
(262 mm)
(89 mm)
(19 mm)
(19 mm)
25A"
(637 mm)
12K"
12K"
(318 mm)
11"
12K"
(318 mm)
(318 mm)
(279 mm)
SS ARM
(95 mm)
SC ARM
DC ARM
4J"
3L"
(108 mm)
9"
(229 mm)
233
CC/CCS25 Curvilinear LED with PicoPrism
™
CC/CCS25 LED Post Top Mount
FEATURES
S I T E / R OA D WAY
CCS
•
Classic, curvilinear style luminaire for architectural relevance and
reduced wind loads
•
LED models with up to 19,000+ lumen output, 350mA or 700mA drive currents
•
Dark-Sky compliant, full-cutoff optics
Features exclusive wiHUBB technology
•
Wireless system for 0-10VDC full range dimming control
•
Programmable autonomous operation
ORDERING. INFORMATION (Example)
FM
CC25P3P35
MOUNTING
FM Flush Mount
EPA
25"
1.2
PT Post Tenon Mount
1.2
DM Direct Mount
1.2
DB
60L5K120
FIXTURE FINISH
BL Black
DB Dark Bronze
LG Light Gray
SG Stealth Gray
PS Platinum Silver
WH White
CC Custom Color*
NOTE: EPA is for Fixture
only
PRA12-5125FM/DB
A-30
FIXTURE OPTIONS
A-25 Photocell receptacle
A-30 120 Volt photocell
A-31 208 Volt photocell
A-32 240 Volt photocell
A-33 277 Volt photocell
A-34 480 Volt photocell
A-35 347 Volt Photocell
REV Accent Reveals (CC only)
WIH-IM In-fixture wireless
*Consult representative
POLE / POLE ARM
NFO Neigbor Friendly Optic
SCL-R Pole Occupancy Sensor
up to 16’ ht., Round3
See Arms & Poles Selection
Guide at www.kimlighting.com
for pole EPA & ordering.
SCL-S Pole Occupancy Sensor
up to 16’ ht., Square3
SCH-R Pole Occupancy Sensor
up to 30’ ht., Round3
SCH-S Pole Occupancy Sensor
up to 30’ ht., Square3
control module
FIXTURE - POST TOP MOUNT
Type I
CC-25"
CCS-25"
Current
CC25P1
CCS25P1
P35 350 mA PicoPrism
P70 700 mA PicoPrism
Type II
CC25P2
CCS25P2
Type III
CC25P3
CCS25P3
Type IV
CC25P4
CCS25P4
Type V
CC25P5
CCS25P5
Type R
CC25PR
CCS25PR
Type L
CC25PL
CCS25PL
1
2
3
ELECTRICAL MODULE1
Source
96L 96 LEDs
Color Temperature
2K Amber
106W at 350mA,
3000K
3K
219W at 700mA
4K 4200K
5K 5100K
Driver has a 0-10V dimming interface with a dimming range of 10-100%.
Compatible with most control systems.
Due to current unavailability of 347V and 480V drivers, specification of
these voltages may feature an integral step-down transformer.
Specify pole diameter if round, voltage and color, e.g. SCL-R4/277/BL.
CC21P
C17P
C17P
7"
17"
DA
DIA
21" DIA
(533 mm)
32
(432
mm)m)
"8"
10"
03
( 03
mm)m)
(254 mm)
"9"
29
( 29
mm)m)
9K"
(241 mm)
K"
5K"D ADIA
40
( 40
mm)m)
CS
CCS17P
7P
234
CCS21P
6L" DIA
(172 mm)
Voltages
120V
208V
240V
277V
347V2
480V2
120
208
240
277
347
480
Note: HID to LED Upgrade Kits available.
Contact factory.
Consult DLC Website for current qualified
product listings.
CC/CCS25 Curvilinear LED with PicoPrism
™
CC/CCS25 LED Arm Mount
FEATURES
CC
Classic, curvilinear style luminaire for architectural relevance and
reduced wind loads
•
LED models with up to 19,000+ lumen output, 350mA or 700mA drive currents
•
Dark-Sky compliant, full-cutoff optics
S I T E / R OA D WAY
•
Features exclusive wiHUBB technology
•
Wireless system for 0-10VDC full range dimming control
•
Programmable autonomous operation
ORDERING. INFORMATION (Example)
1A
CC25A3P35
MOUNTING
1A 1 Arm Side Mt.
EPA
25"
1.5
2B 2 Arm Side Mt.
3.0
2L 2 Arm Side Mt.
2.7
3T 3 Arm Side Mt.
4.3
3Y 3 Arm Side Mt.
4.3
4C 4 Arm Side Mt.
5.9
1W 1 Single Wall Mt.
—
DB
60L5K120
A-30
FIXTURE FINISH
BL Black
DB Dark Bronze
LG Light Gray
SG Stealth Gray
PS Platinum Silver
WH White
CC Custom Color*
FIXTURE OPTIONS
A-25 Photocell receptacle
A-30 120 Volt photocell
A-31 208 Volt photocell
A-32 240 Volt photocell
A-33 277 Volt photocell
A-34 480 Volt photocell
A-35 347 Volt Photocell
REV Accent Reveals (CC only)
WIH-IM In-fixture wireless
*Consult representative
NOTE: EPA is for Fixture only
CCS-25"
Current
Type I
CC25A1
CCS25A1
P35 350 mA PicoPrism
Type II
CC25A2
CCS25A2
P70 700 mA PicoPrism
Type III
CC25A3
CCS25A3
Type IV
CC25A4
CCS25A4
CC25A5
CCS25A5
Type R
CC25AR
CCS25AR
Type L
CC25AL
CCS25AL
1
2
3
4
SCL-R Pole Occupancy Sensor
up to 16’ ht., Round4
Source
96L 96 LEDs
SCH-R Pole Occupancy Sensor SLIPFITTER MOUNTING OPTIONS
up to 30’ ht., Round4
HORIZONTAL
HSF for Pole Davit Arm
SCH-S Pole Occupancy Sensor
up to 30’ ht., Square4
VERTICAL
4” Round, Standard Fixtures
VSF-1SA 1 fixture side mt.
VSF-2SB
VSF-2SL
VSF-3ST
VSF-3SY
VSF-4SC
Color Temperature Voltages
2K Amber
120 120V
3K 3000K
208 208V
4K 4200K
240 240V
5K 5100K
277 277V
347 347V3
480 480V3
106W at 350mA,
219W at 700mA
6"
(533 m
10
8"
(254 m
(203 mm)
C S21
CCS17A
(1
(114 mm)
2 fixtures side mt. 90°
3 fixtures side mt. 90°
3 fixtures side mt. 120°
4 fixtures side mt. 90°
SVSF-2SB
SVSF-2SL
SVSF-3ST
SVSF-4SC
2 fixtures side mt. 180°
2 fixtures side mt. 90°
3 fixtures side mt. 90°
4 fixtures side mt. 90°
Note: HID to LED Upgrade Kits available.
Contact factory.
Consult DLC Website for current qualified
product listings.
CC17A
21
4K"
2 fixtures side mt. 180°
4” Square, Standard Fixtures
SVSF-1SA 1 fixture side mt.
Junction box in wall must provide adequate fixture support.
Driver has a 0-10V dimming interface with a dimming range of 10-100%. Compatible
with most control systems.
Due to current unavailability of 347V and 480V drivers, specification of these voltages
may feature an integral step-down transformer.
Specify pole diameter if round, voltage and color, e.g. SCL-R4/277/BL.
17"
21"DIAD
(432 mm)
See Arms & Poles Selection
Guide at www.kimlighting.com
for pole EPA & ordering.
SCL-S Pole Occupancy Sensor
up to 16’ ht., Square4
ELECTRICAL MODULE2
CC-25"
PRA12-5125A/DB
POLE / POLE ARM
NFO Neigbor Friendly Optic
control module
FIXTURE - ARM MOUNT
Type V
—
(152 mm)
7"
)
Arm
Cross - Section
typical for
all sizes
6"
CC21A
C
21" DIA
( 23
mm
2"
(51 mm)
(533 mm)
(5
10"
(254 mm
(2
2
4K
4K"
(1 mm)
4m
(1
(114
(152 mm)
2"
(51 mm)
Arm
Cross - Section
typical for
all sizes
CCS21A
CC
C
235
Curvilinear LED with PicoEmitter
™
CC/CCS17 & CC/CCS21 LED Post Top Mount
FEATURES
S I T E / R OA D WAY
CCS
•
LED models incorporating patented LED PicoEmitter technology
•
Classic, curvilinear style luminaire for architectural relevance and
reduced wind loads
•
Dark-Sky compliant, full-cutoff optics with flat glass lens
Features exclusive wiHUBB technology
•
Wireless system for 0-10VDC full range dimming control
•
Programmable autonomous operation
ORDERING. INFORMATION (Example)
CC17P3E35
FM
MOUNTING
FM Flush Mount
EPA
17" 21"
0.7 1.0
PT Post Tenon Mount
0.7 1.0
DM Direct Mount
— 1.0
DB
NOTE: EPA is for Fixture only
60L5K120
FIXTURE FINISH
BL Black
DB Dark Bronze
LG Light Gray
SG Stealth Gray
PS Platinum Silver
WH White
CC Custom Color*
FIXTURE OPTIONS
1W Wall Mounting3
A-30 120 Volt photocell
A-31 208 Volt photocell
A-32 240 Volt photocell
A-33 277 Volt photocell
A-34 480 Volt photocell
A-35 347 Volt Photocell
*Consult representative
NFO Neighbor Friendly
Optic
REV Accent Reveals
(CC only)
FIXTURE - POST TOP MOUNT
CC-17"
CCS-17"
CC-21"
CCS-21"
Current
E35 = 350mA
Type I
CC17P1
CCS17P1
CC21P1
CCS21P1
Type II
CC17P2
CCS17P2
CC21P2
CCS21P2
Type III
CC17P3
CCS17P3
CC21P3
CCS21P3
Type IV
CC17P4
CCS17P4
CC21P4
CCS21P4
Type V
CC17P5
CCS17P5
CC21P5
CCS21P5
Type R
CC17PR
CCS17PR
CC21PR
CCS21PR
Type L
CC17PL
CCS17PL
CC21PL
CCS21PL
1
2
3
4
5
Color Temperature
2K Amber
64W
3K 3000K
120L 120 LEDs
4K 4000K
130W
5K 5000K
21" DIA
(533 mm)
32
(432
mm)m)
"8"
10"
03
( 03
mm)m)
(254 mm)
"9"
29
( 29
mm)m)
9K"
(241 mm)
K"
5K"D ADIA
40
( 40
mm)m)
CS
CCS17P
7P
236
CCS21P
Voltages
120 120V
208 208V
240 240V
277 277V
347 347V1
480 480V1
L17F Polycarbonate Lens4
L21F Polycarbonate Lens4
WIH-IM In-Fixture wireless
control module
SCL-R Pole Occupancy Sensor up
to 16’ ht., Round5
SCL-S Pole Occupancy Sensor up
to 16’ ht., Square5
SCH-R Pole Occupancy Sensor up
to 30’ ht., Round5
SCH-S Pole Occupancy Sensor up
to 30’ ht., Square5
PRA12-5125FM/DB
POLE / POLE ARM
See Arms & Poles Selection
Guide at www.kimlighting.com
for pole EPA & ordering.
Note: HID to LED Upgrade Kits available.
Contact factory.
Consult DLC Website for current qualified
product listings.
CC21P
7"
17"
DA
DIA
ELECTRICAL MODULE2
Source
60L 60 LEDs
Due to current unavailability of 347V and 480V drivers,
specification of these voltages may feature an integral
step-down transformer.
Driver has a 0-10V dimming interface with a dimming range
of 10-100%. Compatible with most control systems.
Junction box in wall must provide adequate fixture support.
Use only in high-vandalism situations. Useful life is limited
by UV discoloration from sunlight.
Specify pole diameter if round, voltage and color, e.g.
SCL-R4/277/BL.
C17P
C17P
A-30
6L" DIA
(172 mm)
Curvilinear LED with PicoEmitter
™
CC17 & CC21 LED Arm Mount
FEATURES
CC
LED models incorporating patented LED PicoEmitter technology
•
Classic, curvilinear style luminaire for architectural relevance and
reduced wind loads
•
Dark-Sky compliant, full-cutoff optics with flat glass lens
S I T E / R OA D WAY
•
Features exclusive wiHUBB technology
•
Wireless system for 0-10VDC full range dimming control
•
Programmable autonomous operation
ORDERING. INFORMATION (Example)
CC17A3E35
1A
MOUNTING
1A 1 Arm Side Mt.
EPA
17"
0.9
EPA
21"
1.2
2B 2 Arm Side Mt.
1.8
2.4
2L 2 Arm Side Mt.
1.6
2.2
3T 3 Arm Side Mt.
2.5
3.4
3Y 3 Arm Side Mt.
25
3.4
4C 4 Arm Side Mt.
2.8
3.9
1W Single Wall Mt.
—
—
DB
60L5K120
FIXTURE FINISH
BL Black
DB Dark Bronze
LG Light Gray
SG Stealth Gray
PS Platinum Silver
WH White
CC Custom Color*
*Consult representative
NOTE: EPA is for Fixture only
FIXTURE - ARM MOUNT
CC-17"
CCS-17"
CC-21"
CCS-21"
Current
Type I
CC17A1 CCS17A1 CC21A1 CCS21A1 E35 = 350mA
Type II
CC17A2 CCS17A2 CC21A2 CCS21A2
Type III
CC17A3 CCS21A3 CC21A3 CCS21A3
Type IV
CC21A4 CCS21A4 CC21A4 CCS21A4
Type V
CC21A5 CCS21A5 CC21A5 CCS21A5
Type R
CC21AR CCS21AR CC21AR CCS21AR
Type L
CC21AL CCS21AL CC21AL CCS21AL
1
2
3
4
5
A-30
—
FIXTURE OPTIONS
1W Wall Mounting3
A-30 120 Volt photocell
A-31 208 Volt photocell
A-32 240 Volt photocell
A-33 277 Volt photocell
A-34 480 Volt photocell
A-35 347 Volt Photocell
2A-30 120 Volt Photocell
2A-31 208 Volt Photocell
2A-32 240 Volt Photocell
2A-33 277 Volt Photocell
2A-34 480 Volt Photocell
2A-35 347 Volt Photocell
PRA12-5125A/DB
POLE / POLE ARM
NFO Neighbor Friendly Optic
CGL Convex Glass Lens
REV
L17F
L21F
WIH-IM
SCL-R
SCL-S
SCH-R
SCH-S
Accent Reveals (CC only)
See Arms & Poles Selection
Guide at www.kimlighting.com
for pole EPA & ordering.
Polycarbonate Lens3
Polycarbonate Lens3
SLIPFITTER MOUNTING OPTIONS
In-Fixture wireless
HORIZONTAL
control module
HSF for Pole Davit Arm
Pole Occupancy Sensor up
to 16’ ht., Round5
VERTICAL
Pole Occupancy Sensor up
4” Round, Standard Fixtures
5
to 16’ ht., Square
VSF-1SA 1 fixture side mt.
Pole Occupancy Sensor up
VSF-2SB 2 fixtures side mt. 180°
to 30’ ht., Round5
VSF-2SL 2 fixtures side mt. 90°
Pole Occupancy Sensor up
to 30’ ht., Square5
VSF-3ST 3 fixtures side mt. 90°
VSF-3SY 3 fixtures side mt. 120°
VSF-4SC 4 fixtures side mt. 90°
4” Square, Standard Fixtures
1 fixture side mt.
SVSF-1SA
SVSF-2SB
SVSF-2SL
SVSF-3ST
SVSF-4SC
ELECTRICAL MODULE
2
Source
60L 60 LEDs
Color Temperature
2K Amber
64W
3K 3000K
120L 120 LEDs
4K 4000K
130W
5K 5000K
Due to current unavailability of 347V and 480V drivers,
specification of these voltages may feature an integral
step-down transformer.
Driver has a 0-10V dimming interface with a dimming range
of 10-100%. Compatible with most control systems.
Junction box in wall must provide adequate fixture support.
Use only in high-vandalism situations. Useful life is limited
by UV discoloration from sunlight.
Specify pole diameter if round, voltage and color, e.g.
SCL-R4/277/BL.
CC17A
21
6"
17"
21"DIAD
(432 mm)
(533 m
10
8"
(254 m
(203 mm)
C S21
CCS17A
Voltages
120V
208V
240V
277V
347V1
480V1
120
208
240
277
347
480
4K"
(1
(114 mm)
(152 mm)
7"
)
2 fixtures side mt. 90°
3 fixtures side mt. 90°
4 fixtures side mt. 90°
Note: HID to LED Upgrade Kits available.
Contact factory.
Consult DLC Website for current qualified
product listings.
6"
CC21A
C
21" DIA
( 23
mm
2"
(51 mm)
Arm
Cross - Section
typical for
all sizes
2 fixtures side mt. 180°
(533 mm)
(5
10"
(254 mm
(2
2
4K
4K"
(1 mm)
4m
(1
(114
(152 mm)
2"
(51 mm)
Arm
Cross - Section
typical for
all sizes
CCS21A
CC
C
237
The Entablature LED with PicoPrism
®
™
Small & Large Luminaire
ET LED
S I T E / R OA D WAY
FEATURES
SET LED
•
LED PicoPrism™ technology
•
Efficient, effective downward control of light with full uplight cutoff
SET Entablature is designed for mounting heights of 10’ to 16’. ET is designed
for mounting heights of 20’ to 30’
Features exclusive wiHUBB technology
•
•
Wireless system for 0-10VDC full range dimming control
•
Programmable autonomous operation
ORDERING. INFORMATION (Example)
1SA
SET3P35 40L5K120
MOUNTING - SMALL
1SA 1 Arm Side Mt.
2SB 2 Arm Side Mt.
2SL 2 Arm Side Mt.
3ST 3 Arm Side Mt.
3SY 3 Arm Side Mt.
4SC 4 Arm Side Mt.
1SW1 Single Wall Mt.
MOUNTING - LARGE
1A 1 Arm Side Mt.
2B 2 Arm Side Mt.
2L 2 Arm Side Mt.
3T 3 Arm Side Mt.
3Y 3 Arm Side Mt.
4C 4 Arm Side Mt.
1W Single Wall Mt.
1.5
2.4
2.4
2.7
n/a
2.6
4.1
4.1
4.7
n/a
NOTE: EPA is for Fixture only
FIXTURE
Distribution
SET1 Type I
SET2 Type II
SET3 Type III
SET4 Type IV
SET5 Type V
SETL Type L
SETR Type R
A-30/LS
FIXTURE FINISH
BL Black
DB Dark Bronze
LG Light Gray
SG Stealth Gray
PS Platinum Silver
WH White
CC Custom Color*
EPA
1.0
2.0
EPA
1.8
3.6
DB
FIXTURE OPTIONS
*Consult representative
ELECTRICAL MODULE
2
Source
Color Temp.
40L 40 LEDs,
45W for
350mA,
93W for
700mA
SET LED
80L 80 LEDs,
92W for
350mA,
188W for
700mA
ET LED
Distribution
ET1 Type I
ET2 Type II
ET3 Type III
ET4 Type IV
ET5 Type V
ETL Type L
ETR Type R
2K
3K
4K
5K
—
Voltages
120 120V
208 208V
240 240V
277 277V
347 347V3
480 480V3
580nm
3000K
4200K
5100K
A-25 ET photocell
A-30 120V SET photocell
A-31 208V SET photocell
A-32 240V SET photocell
A-33 277V SET photocell
A-34 480V SET photocell
A-35 347V SET photocell
NFO Neighbor Friendly Optic
SF Single Fuse for 120,
277, 347V
DF Double Fuse for 208,
240, 480V
WIH-IM In-Fixture wireless
control module
SCL Occupancy Sensor up
to 16’ ht.
SCH Occupancy Sensor up
A5/LG
POLE / POLE ARM
SLIPFITTER MTG OPTIONS
VERTICAL
See Arms & Poles Selection
Guide at www.kimlighting.com
for pole EPA & ordering.
4” Round, Standard Fixtures
1 fixture side mt.
VSF-1SA
VSF-2SB
VSF-2SL
VSF-3ST
VSF-3SY
VSF-4SC
2 fixtures side mt. 180°
2 fixtures side mt. 90°
3 fixtures side mt. 90°
3 fixtures side mt. 120°
4 fixtures side mt. 90°
4” Square, Standard Fixtures
SVSF-1SA 1 fixture side mt.
SVSF-2SB
SVSF-2SL
SVSF-3ST
SVSF-4SC
to 30’ ht.
2 fixtures side mt. 180°
2 fixtures side mt. 90°
3 fixtures side mt. 90°
4 fixtures side mt. 90°
HORIZONTAL
HSF for Pole Davit Arm
1
2
3
Junction box in wall must provide adequate fixture support.
Driver has a 0-10V dimming interface with a dimming range
of 10-100%. Compatible with most control systems.
Due to current unavailability of 347V and 480V drivers,
specification of these voltages may feature an integral
step-down transformer.
(94 mm)
1O"
(46 mm)
17K"
1K"
(445 mm)
(38 mm)
3H"
E"
(22 mm)
6"
5"
(127 mm)
1L"
(45 mm)
4J"
(152 mm)
(108 mm)
4K"
FRONT
(114 mm)
SIDE
14 K"
(368 mm)
16"
(127 mm)
2"
(51 mm)
238
23"
2"
(584 mm)
(51 mm)
5"
1 J"
(32 mm)
TOP
Broken Arch
Stepped Arch
Stepped BrokenArch
Standard
Peaked Entablature*
P1 Peak
P2 Broken Peak
Note: HID to LED Upgrade Kits available.
Contact factory.
Consult DLC Website for current qualified
product listings.
ET
(406 mm)
Arched Entablature*
Arch
Current
P35 350mA PicoPrism
P70 700mA PicoPrism
10E"
TOP
A1
A2
A3
A4
A5
*Specify finish
(276 mm)
(305 mm)
OPTIONAL ENTABLATURES
P3 Stepped Peak
P4 Stepped Broken Peak
P5 Stepped
SET
12"
PSA14-4188SA/DB
(203 mm)
8"
(203 mm)
6 F"
6"
(1 5 7 m m )
FRONT
8"
(152 mm)
SIDE
2"
(51 mm)
The Entablature LED with PicoEmitter
®
™
Small & Large Luminaire
ET LED
FEATURES
LED PicoEmitter™ technology
•
Efficient, effective downward control of light with full uplight cutoff
S I T E / R OA D WAY
•
SET LED
SET Entablature is designed for mounting heights of 10’ to 16’. ET is designed
for mounting heights of 20’ to 30’
Features exclusive wiHUBB technology
•
•
Wireless system for 0-10VDC full range dimming control
•
Programmable autonomous operation
ORDERING. INFORMATION (Example)
1SA
SET3E35 60L5K120
MOUNTING - SMALL
1SA 1 Arm Side Mt.
2SB 2 Arm Side Mt.
2SL 2 Arm Side Mt.
3ST 3 Arm Side Mt.
3SY 3 Arm Side Mt.
4SC 4 Arm Side Mt.
1SW1 Single Wall Mt.
MOUNTING - LARGE
1A 1 Arm Side Mt.
2B 2 Arm Side Mt.
2L 2 Arm Side Mt.
3T 3 Arm Side Mt.
3Y 3 Arm Side Mt.
4C 4 Arm Side Mt.
1W Single Wall Mt.
2.0
1.5
2.4
2.4
2.7
n/a
3.6
2.6
4.1
4.1
4.7
ELECTRICAL MODULE2
Source
60L 60 LEDs,
67W
96L 96 LEDs,
105W
Color Temperature
2K 580nm
3K 3000K
4K 4200K
5K 5100K
n/a
—
FIXTURE OPTIONS
*Consult representative
NOTE: EPA is for Fixture only
FIXTURE
Distribution
SET1 Type I
SET2 Type II
SET3 Type III
SET4 Type IV
SET5 Type V
SETL Type L
SETR Type R
A-30/LS
FIXTURE FINISH
BL Black
DB Dark Bronze
LG Light Gray
SG Stealth Gray
PS Platinum Silver
WH White
CC Custom Color*
EPA
1.0
EPA
1.8
DB
Voltages
120V
208V
240V
277V
347V3
480V3
120
208
240
277
347
480
A-25 ET photocell
A-30 120V SET photocell
A-31 208V SET photocell
A-32 240V SET photocell
A-33 277V SET photocell
A-34 480V SET photocell
A-35 347V SET photocell
LS Polycarbonate Lens4
NFO Neigbor Friendly Optic
SF Single Fuse for 120,
277, 347V
DF Double Fuse for 208,
240, 480V
WIH-IM In-Fixture wireless
control module
A5/LG
PSA14-4188SA/DB
POLE / POLE ARM
SLIPFITTER MTG OPTIONS
VERTICAL
See Arms & Poles Selection
Guide at www.kimlighting.com
for pole EPA & ordering.
4” Round, Standard Fixtures
1 fixture side mt.
VSF-1SA
VSF-2SB
VSF-2SL
VSF-3ST
VSF-3SY
VSF-4SC
2 fixtures side mt. 180°
2 fixtures side mt. 90°
OPTIONAL ENTABLATURES
3 fixtures side mt. 90°
3 fixtures side mt. 120°
A1
A2
A3
A4
A5
4 fixtures side mt. 90°
4” Square, Standard Fixtures
SVSF-1SA 1 fixture side mt.
SVSF-2SB
SVSF-2SL
SVSF-3ST
SCL-R Pole Occupancy Sensor
SVSF-4SC
up to 16’ ht., Round5
2 fixtures side mt. 180°
2 fixtures side mt. 90°
3 fixtures side mt. 90°
P1
P2
P3
P4
P5
4 fixtures side mt. 90°
HORIZONTAL
HSF for Pole Davit Arm
SCL-S Pole Occupancy Sensor
up to 16’ ht., Square5
SCH-R Pole Occupancy Sensor
up to 30’ ht., Round5
Current
E35 350mA PicoEmitter™
Distribution
ET1 Type I
ET2 Type II
ET3 Type III
ET4 Type IV
ET5 Type V
ETL Type L
ETR Type R
SCH-S Pole Occupancy Sensor
up to 30’ ht., Square5
1
2
3
4
5
Arched Entablature*
Arch
Broken Arch
Stepped Arch
Stepped BrokenArch
Standard
Peaked Entablature*
Peak
Broken Peak
Stepped Peak
Stepped Broken Peak
Stepped
*Specify finish
Junction box in wall must provide adequate fixture support.
Driver has a 0-10V dimming interface with a dimming range
of 10-100%. Compatible with most control systems.
Due to current unavailability of 347V and 480V drivers,
specification of these voltages may feature an integral
step-down transformer.
CAUTION: Use only when vandalism is anticipated to be high.
Useful life of lens is limited by UV discoloration from sunlight.
Specify pole diameter if round, voltage and color,
e.g. SCL-R4/277/BL.
Note: HID to LED Upgrade Kits available.
Contact factory.
Consult DLC Website for current qualified
product listings.
SET
10E"
(276 mm)
12"
(305 mm)
3H"
E"
(94 mm)
(22 mm)
1O"
TOP
(46 mm)
17K"
1K"
(445 mm)
(38 mm)
6"
5"
(127 mm)
1L"
(45 mm)
4J"
(152 mm)
(108 mm)
4K"
FRONT
(114 mm)
SIDE
ET
14 K"
(368 mm)
16"
(406 mm)
5"
1 J"
(127 mm)
(32 mm)
2"
(51 mm)
TOP
23"
2"
(584 mm)
(51 mm)
(203 mm)
2"
(51 mm)
8"
(203 mm)
6 F"
6"
( 157 m m )
FRONT
8"
(152 mm)
SIDE
239
Structural LED with PicoPrism
™
STS Small
FEATURES
S I T E / R OA D WAY
STS LED
STL LE
•
LED PicoPrism™ technology
•
Efficient, effective downward control of light with full uplight cutoff
•
Elegant form and optional structural elements complement architectural design
•
IES Type II, III, IV, V, and One-Way L or R distribution patterns
Features exclusive wiHUBB technology
•
Wireless system for 0-10VDC full range dimming control
•
Programmable autonomous operation
ORDERING. INFORMATION (Example)
1A
STS3P35 120L5K208
MOUNTING - SMALL
1SA 1 Arm Side Mt.
2SB 2 Arm Side Mt.
2SL 2 Arm Side Mt.
3ST 3 Arm Side Mt.
3SY1 3 Arm Side Mt.
4SC 4 Arm Side Mt.
1SW2 Single Wall Mt.
EPA
1.1
2.2
1.5
2.6
2.6
2.7
—
NOTES: EPA is for Fixture only.
WH
A25
FIXTURE FINISH
BL Black
DB Dark Bronze
LG Light Gray
SG Stealth Gray
PS Platinum Silver
WH White
CC Custom Color*
FIXTURE OPTIONS
A-30
A-31
A-32
A-33
A-35
A-34
LS
NFO
*Consult representative
1
2
3
4
5
3SY only available on round slipfitter.
Junction box in wall must provide adequate fixture support.
Driver has a 0-10V dimming interface with a dimming range of 10-100%.
Compatible with most control systems.
Due to current unavailability of 347V and 480V drivers, specification of these
voltages may feature an integral step-down transformer.
Required only for vandal protection in locations where fixtures can be reached by
unauthorized persons.
6"
STS
(152 mm)
7"
(178 mm)
5K"
(140 mm)
2"
(51 mm)
12"
(305 mm)
19D"
SLIPFITTER MOUNT OPTIONS
SUPP
fixture paint
GS Gusset
GS-W Gusset
SLIPFITTER MOUNTING OPTIONS
HORIZONTAL
VERTICAL
4” Round, Standard Fixtures
VSF-1A 1 fixture side mt.
VSF-2B 2 fixtures side mt. 180°
VSF-2L 2 fixtures side mt. 90°
VSF-3T 3 fixtures side mt. 90°
VSF-3Y 3 fixtures side mt. 120°
VSF-4C 4 fixtures side mt. 90°
4” Square, Standard Fixtures
SVSF-1A 1 fixture side mt.
SVSF-2B 2 fixtures side mt. 180°
SVSF-SL 2 fixtures side mt. 90°
SVSF-3T 3 fixtures side mt. 90°
SVSF-4C 4 fixtures side mt. 90°
HSF for Pole Davit Arm
4” Round, Structural Option
STRF-1A 1 fixture side mt.
STRF-2B 2 fixtures side mt. 180°
STRF-2L 2 fixtures side mt. 90°
STRF-3T 3 fixtures side mt. 90°
STRF-3Y 3 fixtures side mt. 120°
STRF-4C 4 fixtures side mt. 90°
4” Square, Structural Option
1 fixture side mt.
2 fixtures side mt. 180°
STSF-1A
STSF-2B
STSF-2L
STSF-3T
STSF-4C
2 fixtures side mt. 90°
3 fixtures side mt. 90°
4 fixtures side mt. 90°
S g
POLE MOUNTED
O
STRUCTURAL OPTIONS
SingleSwept
Tension
Horizontal
Slipfitter Mount
Single Tension
wept
Double
Tension
Truss
Gusset
Upsweep
Upsweep
WALL
MOUNTED STRUCTURAL
OPTIONS
Singl
(499 mm)
ARM
CROSS SECTION
Single Tension
Double Tension
Truss
Gusset
ert
l pfi
t rM
4"
d 4"
d Rou
4 ca
Squa
eSquare
f St
Fi t
Ve
Slipfitter
ti al SMount
ipfitter Mount
for
xtures
Standard
with Fixtures
240
num rtica ip it e M
4"VRound
4" Square
f F
s it
ruc u a pt s
Vertic
Upliftl Slipfitter Mount
f r Fixtures with
ustable
Structural Options
Steel
See Arms & Poles
Selection Guide at
www.kimlighting.
com for pole EPA &
ordering.
nickel plated clevis
nickel plated clevis
Double Tension
Double Tension
TDP Rod & clevis match TDP-W Rod & clevis match
fixture paint
fixture paint
TDN Stainless steel rod, TDN-W Stainless steel rod,
nickel plated clevis
nickel plated clevis
TR Truss
TR-W Truss
120, 277, 347V
Voltages
120V
208V
240V
277V
347V4
480V4
Single Tension
fixture paint
DF Double Fuse for
208, 240, 480V
SCL Occupancy Sensor
up to 16’ ht.
SCH Occupancy Sensor
up to 30’ ht.
WALL MOUNTED
TSN Stainless steel rod, TSN-W Stainless steel rod,
control module
120
208
240
277
347
480
POLE
POLE MOUNTED
TSP Rod & clevis match TSP-W Rod & clevis match
WIH-IM In-Fixture wireless
FIXTURE
PRA20-5125A/WH
STRUCTURAL OPTIONS
120V Photocell
208V Photocell
240V Photocell
277V Photocell
347V Photocell
480V Photocell
Polycarbonate Lens5
Neighbor Friendly Optic
SF Single Fuse for
Distribution
Current
STS2 Type II P35 350mA PicoPrism
STS3 Type III P70 700mA PicoPrism
STS4 Type IV
ELECTRICAL MODULE3
STS5 Type V
Source Color Temperature
STSR Type R 40L 40 LEDs, 2K Amber
45W for
3K 3000K
STSL Type L
350mA,
4K 4200K
92W for
5K 5100K
700mA
—
VSF-1A
Note: HID to LED
Upgrade Kits available.
Contact factory.
Consult DLC Website
for current qualified
product listings.
Structural LED with PicoPrism
™
STL Large
FEATURES
STS LE
STL LE
LED PicoPrism™ technology
•
Efficient, effective downward control of light with full uplight cutoff
•
Elegant form and optional structural elements complement architectural design
•
IES Type II, III, IV, V, and One-Way L or R distribution patterns
S I T E / R OA D WAY
•
Features exclusive wiHUBB technology
•
Wireless system for 0-10VDC full range dimming control
•
Programmable autonomous operation
ORDERING. INFORMATION (Example)
1A
STL3P35
MOUNTING - LARGE
1A 1 Arm Side Mt.
2B 2 Arm Side Mt.
2L 2 Arm Side Mt.
3T 3 Arm Side Mt.
3Y1 3 Arm Side Mt.
4C 4 Arm Side Mt.
1W2 Single Wall Mt.
EPA
2.2
4.4
2.8
5.0
5.0
5.3
—
NOTES: EPA is for Fixture only.
120L5K208
FIXTURE FINISH
BL Black
DB Dark Bronze
LG Light Gray
SG Stealth Gray
PS Platinum Silver
WH White
CC Custom Color*
2
3
4
5
A25
8"
(203 mm)
7J"
5K"
2J"
(57
2 mm)
(184 mm)
ARM
ARM
CROSS SECTION
9K"
7"
PRA20-5125A/WH
POLE
STRUCTURAL OPTIONS
A-25 Photocell Control
LS Polycarbonate Lens5
NFO Neighbor Friendly Optic
WIH-IM In-Fixture wireless
control module
SF Single Fuse for
120, 277, 347V
DF Double Fuse for
208, 240, 480V
SCL Occupancy Sensor
up to 16’ ht.
SCH Occupancy Sensor
up to 30’ ht.
POLE MOUNTED
WALL MOUNTED
Single Tension
Single Tension
TSP Rod & clevis match TSP-W Rod & clevis match
fixture paint
fixture paint
TSN Stainless steel rod, TSN-W Stainless steel rod,
nickel plated clevis
nickel plated clevis
Double Tension
Double Tension
TDP Rod & clevis match TDP-W Rod & clevis match
fixture paint
fixture paint
TDN Stainless steel rod, TDN-W Stainless steel rod,
nickel plated clevis
nickel plated clevis
TR Truss
TR-W Truss
GS Gusset
GS-W Gusset
VERTICAL
Voltages
120V
208V
240V
277V
347V4
480V4
120
208
240
277
347
480
SLIPFITTER MOUNT OPTIONS
SUPP
4” Round, Standard Fixtures
VSF-1A 1 fixture side mt.
VSF-2B 2 fixtures side mt. 180°
VSF-2L 2 fixtures side mt. 90°
VSF-3T 3 fixtures side mt. 90°
VSF-3Y 3 fixtures side mt. 120°
VSF-4C 4 fixtures side mt. 90°
4” Square, Standard Fixtures
SVSF-1A 1 fixture side mt.
SVSF-2B 2 fixtures side mt. 180°
SVSF-SL 2 fixtures side mt. 90°
SVSF-3T 3 fixtures side mt. 90°
SVSF-4C 4 fixtures side mt. 90°
4” Round, Structural Option
STRF-1A 1 fixture side mt.
STRF-2B 2 fixtures side mt. 180°
STRF-2L 2 fixtures side mt. 90°
STRF-3T 3 fixtures side mt. 90°
STRF-3Y 3 fixtures side mt. 120°
STRF-4C 4 fixtures side mt. 90°
4” Square, Structural Option
1 fixture side mt.
2 fixtures side mt. 180°
STSF-1A
STSF-2B
STSF-2L
STSF-3T
STSF-4C
Single Tension
Double Tension
2 fixtures side mt. 90°
3 fixtures side mt. 90°
4 fixtures side mt. 90°
Note: HID to LED
Upgrade Kits available.
Contact factory.
Consult DLC Website
for current qualified
product listings.
Truss
Horizontal
Slipfitter Mount
pf tt
HORIZONTAL
HSF for Pole Davit Arm
POLE MOUNTED STRUCTURAL OPTIONS
(241 m )
16"
See Arms & Poles
Selection Guide at
www.kimlighting.
com for pole EPA &
ordering.
SLIPFITTER MOUNTING OPTIONS
3Y only available on round slipfitter.
Junction box in wall must provide adequate fixture support.
Driver has a 0-10V dimming interface with a dimming range of 10-100%.
Compatible with most control systems.
Due to current unavailability of 347V and 480V drivers, specification of these
voltages may feature an integral step-down transformer.
Required only for vandal protection in locations where fixtures can be reached by
unauthorized persons.
STL
—
VSF-1A
FIXTURE OPTIONS
*Consult representative
FIXTURE
Distribution
Current
STL2 Type II P35 350mA PicoPrism
STL3 Type III P70 700mA PicoPrism
ELECTRICAL MODULE3
STL4 Type IV
STL5 Type V
Source
Color Temperature
80L 80 LEDs,
2K Amber
STLR Type R
92W for
3K 3000K
STLL Type L
350mA
4K 4200K
184W for
5K 5100K
700mA
1
WH
Gusset
WALL MOUNTED STRUCTURAL OPTIONS
(406 mm)
26"
9D
Single Tension
(660
499mm)
mm
Double Tension
Truss
Gusset
4" Round
4" Square
d
4 Sq are
Ve
Slipfitter
t al Slipfitter
Mount Mount
xtures
f r Stan
with
ard Fixtures
num
4" Round
4" Square
Verti
al Slipfitter Mount
Uplift
for Fixtures with
stable
Structural Options
Steel
241
Structural LED with PicoEmitter
™
STS Small
FEATURES
S I T E / R OA D WAY
STS LED
•
LED PicoEmitter™ technology
•
Efficient, effective downward control of light with full uplight cutoff
•
Elegant form and optional structural elements complement architectural design
•
IES Type II, III, IV, V, and One-Way L or R distribution patterns
Features exclusive wiHUBB technology
•
Wireless system for 0-10VDC full range dimming control
•
Programmable autonomous operation
ORDERING. INFORMATION (Example)
1A
STS3E35 120L5K208 WH
MOUNTING - SMALL
1SA 1 Arm Side Mt.
2SB 2 Arm Side Mt.
2SL 2 Arm Side Mt.
3ST 3 Arm Side Mt.
3SY1 3 Arm Side Mt.
4SC 4 Arm Side Mt.
1SW2 Single Wall Mt.
EPA
1.1
2.2
1.5
2.6
2.6
2.7
—
NOTES: EPA is for Fixture only.
FIXTURE FINISH
BL Black
DB Dark Bronze
LG Light Gray
SG Stealth Gray
PS Platinum Silver
WH White
CC Custom Color*
*Consult representative
A25
FIXTURE OPTIONS
A-30
A-31
A-32
A-33
A-35
A-34
LS
NFO
1
2
3
4
5
(152 mm)
7"
(178 mm)
5K"
(140 mm)
2"
(51 mm)
12"
(305 mm)
19D"
Single Tension
fixture paint
See Arms & Poles
Selection Guide at
www.kimlighting.
com for pole EPA &
ordering.
nickel plated clevis
nickel plated clevis
Double Tension
Double Tension
TDP Rod & clevis match TDP-W Rod & clevis match
fixture paint
fixture paint
TDN Stainless steel rod, TDN-W Stainless steel rod,
nickel plated clevis
nickel plated clevis
TR Truss
TR-W Truss
208, 240, 480V
6"
STS
Single Tension
fixture paint
SCL Occupancy Sensor
3SY only available on round slipfitter.
Junction box in wall must provide adequate fixture support.
Driver has a 0-10V dimming interface with a dimming range of 10-100%.
Compatible with most control systems.
Due to current unavailability of 347V and 480V drivers, specification of these
voltages may feature an integral step-down transformer.
Required only for vandal protection in locations where fixtures can be reached by
unauthorized persons.
WALL MOUNTED
TSN Stainless steel rod, TSN-W Stainless steel rod,
SF Single Fuse for
up to 16’ ht.
SCH Occupancy Sensor
up to 30’ ht.
POLE
POLE MOUNTED
TSP Rod & clevis match TSP-W Rod & clevis match
120, 277, 347V
Distribution
Current
STS2 Type II E35 350mA
PicoEmitter
STS3 Type III
ELECTRICAL
MODULE3
STS4 Type IV
Source Color Temperature Voltages
STS5 Type V
60L 60 LEDs, 2K Amber
120 120V
Type
R
STSR
68W
3K 3000K
208 208V
STSL Type L
4K 4200K
240 240V
5K 5100K
277 277V
347 347V4
480 480V4
PRA20-5125A/WH
STRUCTURAL OPTIONS
120V Photocell
208V Photocell
240V Photocell
277V Photocell
347V Photocell
480V Photocell
Polycarbonate Lens5
Neighbor Friendly Optic
DF Double Fuse for
FIXTURE
—
VSF-1A
GS Gusset
GS-W Gusset
SLIPFITTER MOUNTING OPTIONS
HORIZONTAL
VERTICAL
4” Round, Standard Fixtures
VSF-1A 1 fixture side mt.
VSF-2B 2 fixtures side mt. 180°
VSF-2L 2 fixtures side mt. 90°
VSF-3T 3 fixtures side mt. 90°
VSF-3Y 3 fixtures side mt. 120°
VSF-4C 4 fixtures side mt. 90°
4” Square, Standard Fixtures
SVSF-1A 1 fixture side mt.
SVSF-2B 2 fixtures side mt. 180°
SVSF-SL 2 fixtures side mt. 90°
SVSF-3T 3 fixtures side mt. 90°
SVSF-4C 4 fixtures side mt. 90°
HSF for Pole Davit Arm
4” Round, Structural Option
STRF-1A 1 fixture side mt.
STRF-2B 2 fixtures side mt. 180°
STRF-2L 2 fixtures side mt. 90°
STRF-3T 3 fixtures side mt. 90°
STRF-3Y 3 fixtures side mt. 120°
STRF-4C 4 fixtures side mt. 90°
4” Square, Structural Option
1 fixture side mt.
2 fixtures side mt. 180°
STSF-1A
STSF-2B
STSF-2L
STSF-3T
STSF-4C
2 fixtures side mt. 90°
3 fixtures side mt. 90°
4 fixtures side mt. 90°
ng
POLE MOUNTED STRUCTURAL OPTIONS
SLIPFITTER MOUNT OPTIONS
SUP
Swept
Single
Tension
Horizontal
Slipfitter Mount
wept
Double Tension
Truss
Gusset
Upsweep
Upsweep
WALL
MOUNTED STRUCTURAL
OPTIONS
Singl
(499 mm)
ARM
CROSS SECTION
Single Tension
Double Tension
Truss
Gusset
ert
l pfi
t rM
4" Rou
d 4"
nd
4 ca
Squa
eSquare
f St
Fi t
lVerti
Slipfitter
al SlMount
pfitter Mount
for
xtures
Standard
with Fixtures
242
numrtica ip it e M
4"VRound
4" Square
f F
s it
ruc u a pt s
Vertica
Uplift Slipfitter Mount
for
Fixtures with
stable
Structural Options
Steel
Note: HID to LED
Upgrade Kits available.
Contact factory.
Consult DLC Website
for current qualified
product listings.
Structural LED with PicoEmitter
™
STL Large
FEATURES
STL L
LED PicoEmitter™ technology
•
Efficient, effective downward control of light with full uplight cutoff
•
Elegant form and optional structural elements complement architectural design
•
IES Type II, III, IV, V, and One-Way L or R distribution patterns
S I T E / R OA D WAY
•
Features exclusive wiHUBB technology
•
Wireless system for 0-10VDC full range dimming control
•
Programmable autonomous operation
ORDERING. INFORMATION (Example)
1A
STL3E35
MOUNTING - LARGE
1A 1 Arm Side Mt.
2B 2 Arm Side Mt.
2L 2 Arm Side Mt.
3T 3 Arm Side Mt.
3Y1 3 Arm Side Mt.
4C 4 Arm Side Mt.
1W2 Single Wall Mt.
EPA
2.2
4.4
2.8
5.0
5.0
5.3
—
NOTES: EPA is for Fixture only.
3Y ony available on round slipfitter
120L5K208
WH
A25
FIXTURE FINISH
BL Black
DB Dark Bronze
LG Light Gray
SG Stealth Gray
PS Platinum Silver
WH White
CC Custom Color*
FIXTURE OPTIONS
5K 5100K
1
2
3
4
5
8"
(203 mm)
7J"
5K"
2J"
(57
2 mm)
(184 mm)
ARM
ARM
CROSS SECTION
9K"
7"
WALL MOUNTED
Single Tension
Single Tension
fixture paint
SF Single Fuse for
120, 277, 347V
DF Double Fuse for
208, 240, 480V
SCL Occupancy Sensor
up to 16’ ht.
SCH Occupancy Sensor
up to 30’ ht.
fixture paint
TSN Stainless steel rod, TSN-W Stainless steel rod,
GS-W Gusset
SLIPFITTER MOUNTING OPTIONS
Voltages
120V
208V
240V
277V
347V4
480V4
120
208
240
277
347
480
SUPP
SLIPFITTER MOUNT OPTIONS
4” Round, Standard Fixtures
VSF-1A 1 fixture side mt.
VSF-2B 2 fixtures side mt. 180°
VSF-2L 2 fixtures side mt. 90°
VSF-3T 3 fixtures side mt. 90°
VSF-3Y 3 fixtures side mt. 120°
VSF-4C 4 fixtures side mt. 90°
4” Square, Standard Fixtures
SVSF-1A 1 fixture side mt.
SVSF-2B 2 fixtures side mt. 180°
SVSF-SL 2 fixtures side mt. 90°
SVSF-3T 3 fixtures side mt. 90°
SVSF-4C 4 fixtures side mt. 90°
HSF for Pole Davit Arm
4” Round, Structural Option
STRF-1A 1 fixture side mt.
STRF-2B 2 fixtures side mt. 180°
STRF-2L 2 fixtures side mt. 90°
STRF-3T 3 fixtures side mt. 90°
STRF-3Y 3 fixtures side mt. 120°
STRF-4C 4 fixtures side mt. 90°
4” Square, Structural Option
1 fixture side mt.
2 fixtures side mt. 180°
STSF-1A
STSF-2B
STSF-2L
STSF-3T
STSF-4C
2 fixtures side mt. 90°
3 fixtures side mt. 90°
4 fixtures side mt. 90°
Note: HID to LED
Upgrade Kits available.
Contact factory.
Consult DLC Website
for current qualified
product listings.
POLE MOUNTED STRUCTURAL OPTIONS
Single Tension
Double Tension
Truss
Horizontal
Slipfitter Mount
pf t
HORIZONTAL
VERTICAL
(241 m )
16"
See Arms & Poles
Selection Guide at
www.kimlighting.
com for pole EPA &
ordering.
nickel plated clevis
nickel plated clevis
Double Tension
Double Tension
TDP Rod & clevis match TDP-W Rod & clevis match
fixture paint
fixture paint
TDN Stainless steel rod, TDN-W Stainless steel rod,
nickel plated clevis
nickel plated clevis
TR Truss
TR-W Truss
GS Gusset
3Y only available on round slipfitter.
Junction box in wall must provide adequate fixture support.
Driver has a 0-10V dimming interface with a dimming range of 10-100%.
Compatible with most control systems.
Due to current unavailability of 347V and 480V drivers, specification of these
voltages may feature an integral step-down transformer.
Required only for vandal protection in locations where fixtures can be reached by
unauthorized persons.
STL
POLE
POLE MOUNTED
TSP Rod & clevis match TSP-W Rod & clevis match
FIXTURE
Distribution
Current
STL2 Type II E35 350mA
PicoEmitter
STL3 Type III
ELECTRICAL
MODULE3
STL4 Type IV
Source
Color Temperature
STL5 Type V
120L 120 LEDs,
2K Amber
Type
R
STLR
130W
3K 3000K
STLL Type L
4K 4200K
PRA20-5125A/WH
STRUCTURAL OPTIONS
A-25 Photocell Control
LS Polycarbonate Lens5
NFO Neighbor Friendly Optic
*Consult representative
—
VSF-1A
Gusset
WALL MOUNTED STRUCTURAL OPTIONS
(406 mm)
26"
9D
Single Tension
(660
499mm)
mm
Double Tension
Truss
Gusset
d
4 Sq are
4" Round
4" Square
Mount Mount
VSlipfitter
t al Slipfitter
xtures
with Fixtures
for Standard
num
4" Round
4" Square
Vertic
Upliftl Slipfitter Mount
for
Fixtures with
stable
Structural Options
Steel
243
Parking Garage Luminaire
PGL7
FEATURES
PA R K I N G S T R U C T U R E
PGL7
•
LED models incorporating patented LED Picoemitter™ technology
•
The PGL7 offers wide or narrow optics in two distribution patterns
Features exclusive wiHUBB technology
•
Wireless system for 0-10VDC full range dimming control
•
Programmable autonomous operation
ORDERING. INFORMATION (Example)
60L3K277
PGL71N
LED FIXTURE
Narrow
Cat. Nos.
PGL71 series PGL71N
PGL74 series PGL74N
WH
FIXTURE FINISH
PS Platinum Silver
Wide
PGL71W
PGL74W
(Standard)
WH White
CC Custom Color*
*Consult representative
ELECTRICAL MODULE
PGL7 LED, 60 LEDs, 73 Watt
Color Temperature
Source
2K 580nm
60L 60 LED’s
3K 3000K
4K 4200K
5K 5100K
TS
SC1
FIXTURE OPTIONS
SF 120 Volt Single Fuse
DF 208 Volt Double Fuse
DF 240 Volt Double Fuse
SF 277 Volt Single Fuse
SF 347 Volt Single Fuse
DF 480 Volt Double Fuse
PB2 Balanced Pendant J-Box
SMART CONTROL OPTIONS1
SC1 Outboard j-box mounted
and Bird Shroud
Voltages
120 120V
208 208V
240 240V
277 277V
347 347V
480 480V
WIH-IM In-Fixture wireless
control module
NFO Neighbor Friendly Optics
1
For more information, refer to PGL7 Product Specification
Sheet at www.kimlighting.com.
PGL7 DISTRIBUTIONS
PGL71W Type V Square
PGL74W Type III
Down Light
Down Light
Driving Direction
Driving Direction or away from perimetter
PGL71N Type V Square
PGL74N Type III
Down Light
Down Light
Driving Direction or away from perimetter
Driving Direction
PGL7
PGL7 with Standard
Polycarbonate Refractor
18" DIA
(457 mm)
PGL7 with Optional Balanced Pendant
J-Box and Bird Shroud (PB2)
10" DIA
4J"
(254 mm)
11L"
(108 mm)
4"
(299 mm)
ACRYLIC
(102 mm)
7K"
(191 mm)
3K"
(89 mm)
244
sensor by others. Low
voltage wiring to all
controlled fixtures.
SC2 Sensor integral to luminaire.
Low voltage wiring to
controlled satellite fixtures.
8J"
(210 mm)
11L"
(299 mm)
LEXAN® Option
Smart Control System (SC2)
3F"
(76 mm)
4C"
(299 mm)
provided
Note: HID to LED Upgrade Kits available.
Contact factory.
Consult DLC Website for current qualified
product listings.
Compact Floodlight
CFL1 - LED
ARCHITECTURAL FLOODLIGHTS
FEATURES
•
24 energy efficient LED diodes configured in a rectangular array for
directional illumination
•
Designed for spot, NF, MF, & WF beam spread while maintaining excellent uniformity
•
Die-cast housing with integral cooling ribs design to dissipate heat allowing
electrical components to operate within their allowable limits
•
A variety of mounting options and standard heavy duty swivel allows
flexibility for fine-tuning projects on the job site
ORDERING. INFORMATION (Example)
CFL1E35
24L5KUV
FIXTURE
CFL1SP
CFL1NF
CFL1MF
CFL1WF
BL
JBR-21
BD-CFL
FIXTURE FINISH
BL Black
DB Dark Bronze
LG Light Gray
SG Stealth Gray
PS Platinum Silver
WH White
CC Custom Color*
FIXTURE ACCESSORIES
BD-CFL Barn Doors1,2
FH-CFL Fixed hood1
FS-CFL Full Shield1,3
MOUNTING OPTIONS
JBR-2 Brass in-grade Architectural
JBR-3
JBR-21
JBR-24
*Consult representative
JBR-30
JBR-32
J-box, (2) K" NPT in bottom4,5
Brass in-grade Architectural
J-box, (2) L" NPT in bottom4,5
Brass in-grade Architectural
J-box, (2) K" NPT in sides,
(2) K" NPT in bottom4,5
Brass In-grade Architectural
J-box, (4) K" NPT in sides,
(2) K" NPT in bottom4,5
Brass in-grade staked J-box6
Brass in-grade staked J-box
with cord5
SM18
J-27N
JW
EP17
JB1
J-25N
Stanchion Mount1
Surface Mount1,7
Architectural Wall Mount1
Landscape Light Post Mount8
Architectural J-box1,9
Portable spear mount
ELECTRICAL MODULE
Source
Color Temperature
24L 24 LEDs
2K 580nm
3K 3000K
4K 4200K
5K 5100K
1
2
3
Voltage
UV Universal Voltage
from 120 to 277V
with a ±10%
tolerance
Specify finish, BL - Black, DB - Dark Bronze, LG - Light Gray,
SG - Stealth Gray, PS - Platinum Silver, WH - White.
CAUTION: Not recommended for ground mounted
fixtures in vandal prone areas.
CAUTION: Do not use where leaves and trash can
collect inside shield.
5
6
7
CAUTION: Fixture stem and swivel must not contact
soil or standing water. Provide drainage away from J-box.
May also be used to hard mount low voltage fixtures.
Surface mount can be connected to conduit or
outdoor cord with waterproof cord seal (by others).
8
9
Should be used with a UL listed fixture and grounding
means (i.e., third wire) suitable for use in wet locations.
CAUTION: J-box must be installed high enough to
avoid contact with soil or standing water.
5B"
(130 mm)
7D"
(194 mm)
9" MAX
6"
(152 4 mm)
2J"
(57 mm)
2N"
(65 mm)
SIDE
(229 mm)
10K"
(267 mm)
59 64"
10G"
(265 mm)
145°
(131 mm)
at max.
back tilt
3" TYPICAL
(76 mm)
0° Vertical
30°
3K"
(89 mm)
4C"
(111 mm)
10G"
(265 mm)
3K"
(89 mm)
4C"
(111 mm)
K" NPSM
FRONT
AIMING RANGE
BD-CFL
BARN DOORS
FH-CFL
FIXED HOOD
FS-CFL
FULL SHIELD
245
Wall Forms
®
WF Wall Forms Round
FEATURES
WA L L M O U N T E D
WF21
•
Energy efficient LED diodes available in 10 watt and 20 watt systems
•
Four optical configurations for architectural accent lighting applications
•
Three mounting configurations: surface, recessed hollow wall mount, and
recessed concrete mount
•
Molded, internal prismed or heat-treated smooth glass lens options
•
Available LED Color temperatures include 3000K, 4200K, 5100K,
and 580nm
ORDERING. INFORMATION (Example)
WF22
18L3K120
FIXTURE
Surface Mount
Smooth Internal
Prismed
Cat. Nos. Configuration Lens
Full Face
WF20
S
Half Face
S
WF21
Cutoff Face
—
WF22
Shallow
—
WF23
P
P
—
—
Cutoff Face
Smooth Internal
Prismed
Cat. Nos. Configuration Lens
Full Face
WF30C
S
Half Face
S
WF31C
Cutoff Face
—
WF32C
Shallow
—
WF33C
P
P
—
—
Recessed Hollow Wall Mount
Full Face
S
WF30H
Half Face
S
WF31H
Cutoff Face
—
WF32H
Shallow
—
WF33H
P
P
—
—
Cutoff Face
FIXTURE FINISH
BL Black
DB Dark Bronze
LG Light Gray
SG Stealth Gray
PS Platinum Silver
WH White
CC Custom Color*
ELECTRICAL MODULE
Source
Color Temperature
9L 9 LEDs
2K 580nm
18L 18 LEDs
3K 3000K
4K 4200K
5K 5100K
6E"(152 mm)
1L"
8D"
(25 mm)
10K"
(203 mm)
SEMI RECESSED
5B"(127 mm)
246
CUTOFF FACE
RECESSED
HOUSING
REAR VIEW
FULLY RECESSED
10E"
(254 mm)
5"(127 mm)
5E"(127 mm)
WF20
Voltages
120V
208V
240V
277V
120
208
120
277
HALF FACE
FULL FACE
Junction box
In wall by others
(203 mm)
FIXTURE OPTIONS
SF 120 Volt Single Fuse
DF 208 Volt Single Fuse
DF 240 Volt Single Fuse
SF 277 Volt Single Fuse
*Consult representative
Recessed Concrete Mount
Cutoff Face
SF
BL
WF30C
WF30H
WF21
SHALLOW CUTOFF FACE
L" NPT Conduit Taps:
C - Concrete Wall Model
2 in sides, 2 in bottom
H - Hollow Wall Models
2 in bottom Only
WF22
WF31C
WF31H
BACK
7J"
5K"(127 mm)
SEMI RECESSED
3L" (76 mm)
FULLY RECESSED
ADA compliant
when fully recessed
WF23
WF32C
WF32H
WF33C
WF33H
Site Wallforms
®
SW1/SW3 Site Wallforms
®
FEATURES
Energy efficient LED systems available with 18 or 36 diodes
•
Round and triangular geometric shapes provide design flexibility
for architectural accent lighting applications
•
Die-cast aluminum housing designed for full-cutoff classification,
reducing spill light and nighttime glow
•
LED Color temperatures include 3000K, 4200K, 5100K, and 580nm
SW1
36L3K120
FIXTURE
Site Wallforms
SW1
Site Wallforms
SW3
SW1
SW3
WA L L M O U N T E D
•
TG
DB
FIXTURE FINISH
BL Black
DB Dark Bronze
LG Light Gray
SG Stealth Gray
PS Platinum Silver
WH White
CC Custom Color*
FIXTURE OPTIONS
TG Textured Glass Lens
*Consult representative
ELECTRICAL MODULE
Source
Color Temperature
18L 18 LEDs
2K 580nm
36L 36 LEDs
3K 3000K
4K 4200K
5K 5100K
Voltages
120V
208V
240V
277V
120
208
240
277
SW1 LED
SW3 LED
8"
12J"
(305 mm)
(203 mm)
4K"
(102 mm)
4" Octagonal
J-box in wall
(by others)
Mounting Plate,
Gasket, and
Rope Caulk
by Kim
8"
12J"
(203 mm)
(305 mm)
5J"
(127 mm)
Mounting Pla
Gasket, and
Rope Caulk
by Kim
4" Octagonal
J-box in wall
(by others)
247
Wall Director LED with PicoEmitter
®
™
Small WD14 & Large WD18 Wall Director
WD14
WA L L M O U N T E D
FEATURES
WD18
•
LED PicoEmitter™ technology
•
Small & large scale LED uplight and downlight luminance for architectural
accent lighting
•
IES Type II, III, and IV distribution patterns
•
Dark-Sky compliant, full cut-off luminaire (down position only)
Features exclusive wiHUBB technology
•
Wireless system for 0-10VDC full range dimming control
•
Programmable autonomous operation
ORDERING. INFORMATION (Example)
WD14-D2E35
60L5K120
FIXTURE FINISH
BL Black
DB Dark Bronze
LG Light Gray
SG Stealth Gray
PS Platinum Silver
WH White
CC Custom Color*
FIXTURE - 14” SMALL
WD14" - UP
WD14-U2E35 UP Type II, 350mA
WD14-U3E35 UP Type III, 350mA
WD14-U4E35 UP Type IV, 350mA
WD14" - DOWN
WD14-D2E35 UP Type II, 350mA
WD14-D3E35 UP Type III, 350mA
WD14-D4E35 UP Type IV, 350mA
ELECTRICAL MODULE
Color Temperature
2K Amber
60L 60 LEDs, 65W
For WD14
3K 3000K
120L 120 LEDs, 127W 4K 4200K
For WD18
5K 5100K
Source
WD18" - UP
WD18-U2E35 UP Type II, 350mA
WD18-U3E35 UP Type III, 350mA
WD18-U4E35 UP Type IV, 350mA
WD18" - DOWN
WD18-D2E35 UP Type II, 350mA
WD18-D3E35 UP Type III, 350mA
WD18-D4E35 UP Type IV, 350mA
2
3
FIXTURE OPTIONS
A-30 120 Volt photocell
A-31 208 Volt photocell
A-32 240 Volt photocell
A-33 277 Volt photocell
A-34 480 Volt photocell
A-35 347 Volt Photocell
*Consult representative
FIXTURE - 18” LARGE
1
A-30
WH
4L" DIA.
Bolt Circle
7C"
(187 mm)
6L"
(172 mm)
8E"
6F"
(225 mm)
(157 mm)
4K" (114 mm)
5J"
(133 mm)
To J-box center
3K" DIA.
Bolt Circle
14D"
(372 mm)
WD18
Mounting Plate
Attaches directly to any
standard 4" J-box (by others)
8L"
7K"
(222 mm)
(191 mm)
7L"
17"
(432 mm)
(165 mm)
(299 mm)
6B" (156 mm)
(210 mm)
To J-box center
18"
(457 mm)
248
6K"
(197 mm)
11L"
8J"
Lexan Enclosure2
Wire Guard
208 Volt Double Fuse
240 Volt Double Fuse
277 Volt Single Fuse
347 Volt Single Fuse
480 Volt Double Fuse
Note: HID to LED Upgrade Kits available.
Contact factory.
Consult DLC Website for current qualified
product listings.
WD14
13"
5˚ Shield
Surface Conduit Mt.
UP3
SCM14D Surface Conduit Mt.
DOWN3
WIH-IM In-Fixture wireless
control module
SF 120 Volt Single Fuse
DF
DF
SF
SF
DF
Voltages
120 120V
208 208V
240 240V
277 277V
347 347V1
480 480V1
Due to current unavailability of 347V and 480V drivers,
specification of these voltages may feature an integral
step-down transformer.
Use only when vandalism is anticipated to be high Useful
life limited by UV discoloration from sunlight. A program
of regular inspection and periodic replacement is highly
recommended to maintain optimum fixture performance.
Must be securely mounted to all surface.
(330 mm)
5DS14
LS
WG14
SCM14U
5H"
(145 mm)
Mounting Plate
Must be securely
attached to wall outside
the J-box perimeter.
Low Level Luminaires
GEM Performance Bollards
™
FEATURES
•
The GEM is designed to produce high levels of illuminance and an attractive
lens presence. The visible lens produces a point of interest and attracts attention
GEM1
GEM1C
L OW L E V E L
•
Designed for lighting walkways, entrances, courtyards, and landscaped areas
where fixtures are viewable from all directions
•
The GEM lighted head is constructed of die-cast aluminum, with a
molded glass refractor
•
Battery back-up, emergency battery pack and houseside shield options available
ORDERING. INFORMATION (Example)
GEM1
18L5K120
FIXTURE
WITH ALUMINUM SHAFT
GEM1 Fixture
WITH CONCRETE SHAFT
GEM1C Fixture
—
DB
LUMINAIRE FINISH
BL Black
DB Dark Bronze
LG Light Gray
SG Stealth Gray
PS Platinum Silver
WH White
CC Custom Color*
HS
OPTIONS
CONCRETE FINISH
BR-C Brown
CH-C Charcoal
NG-C Natural Gray
WH-C White
HS Houseside Shield
DR Duplex Receptacle
(GEM only)
DR-GFI Duplex Receptacle w/
Ground Fault Interruptor
(GEM only)
EM Battery Back-up
Available colors integral
in concrete mix
*Consult representative
ELECTRICAL MODULE
LED
Source
18L Type 1
27L Type 3
36L Type 5
Color Temperature
2K 580nm
3K 3000K
4K 4200K
5K 5100K
Voltages
UV Universal Voltage
(120 thru 277)
GEM1
Maximum weight: 28 lb
5"
(127 mm)
GEM1C
Maximum weight: 114 lb
9K" DIA
(241 mm)
5"
8" DIA
(127 mm)
(203 mm)
9K"
37K"
(95 mm)
CONDUIT
OPENING
(1080 mm)
8" DIA
(203 mm)
1K"
(38 mm)
ANCHOR
BOLT
PROJ
8" DIA
(203 mm)
(241 mm)
3L"
42K"*
(241 mm)
9K"
(241 mm)
(953 mm)
LIGHT
CENTER
HEIGHT
9K" DIA
5" (127 mm)
BOLT CIRCLE DIA
BASE PLAN
GEM
ALUMINUM SHAFT
*30" OR 36" OVERALL HEIGHT
42K"
(1080 mm)
MAXIMUM
HEIGHT
ABOVE
GRADE
8" DIA
(203 mm)
3C"
(775 mm)
MINIMUM
HEIGHT
ABOVE
GRADE
9K" (241 mm)
BOLT CIRCLE DIA
16" (406 mm)
MAXIMUM
BURIAL DEPTH
5K"
(140 mm)
3K"
(89 mm)
(86 mm)
CONDUIT
OPENING
30K"
OPTIONAL
HOUSESIDE
SHIELD
BASE PLAN
GEM
CONCRETE SHAFT
AVAILABLE CONTACT
KIM REPRESENTATIVE
(27K" ABSOLUTE MINIMUM)
249
Low Level Luminaires
BNB Bounce & LE Era Lantern Bollard
®
L OW L E V E L
FEATURES
BNB1
LE1
•
Kim Lighting’s Bounce Bollard LED series is perfect for pedestrian zones,
pathways, perimeters, or other lower-mount and landscape applications,
and is ideal for traditional or contemporary architecture requiring a striking
European accent
•
The BNB head is constructed of die-cast and extruded aluminum with a
flat glass lens
•
The LE Era Lanterd Bollard head is constructed of die-cast aluminum with a
flat glass lens or optional enclosure
•
Battery back-up, emergency battery pack and houseside shield options available
ORDERING. INFORMATION (Example)
BNB1
18L3K120
FIXTURE
WH
ELECTRICAL MODULE
BNB1 Bounce Bollard
LE1 Era Lantern Bollard
LUMINAIRE FINISH
BL Black
DB Dark Bronze
LG Light Gray
SG Stealth Gray
PS Platinum Silver
WH White
CC Custom Color*
LED
Source
18L Type 1
27L Type 3
36L Type 5
HS
Voltages
Color Temperature
2K 580nm
UV Universal Voltage
(120 thru 277)
3K 3000K
4K 4200K
5K 5100K
*Consult representative
OPTIONS
HS
SF
DF
DF
SF
SF
DF
EM
BBC
Houseside Shield
120 Volt Single Fuse
208 Volt Double Fuse
240 Volt Double Fuse
277 Volt Single Fuse
347 Volt Single Fuse
480 Volt Double Fuse
Battery Bakup
Dark-Sky compliant Matte
Black Body Cap for BNB1
LS Polycarbonate Lantern
Enclosure for LE1
A Acrylic Lantern Enclosure
for LE1
12" DIA
BNB1
(305 mm)
LE1
3C"
11K" DIA
(292 mm)
(86 mm)
9D"
12B"
(245 mm)
(308 mm)
2G" x 3O"
CONDUIT OPENING
5" BOLT
2G" x 3O"
8N" DIA
(218 mm)
CIRCLE DIA
28"
(711 mm)
CONDUIT OPENING
5B" DIA
28"
(130 mm)
(711 mm)
5" DIA
(127 mm)
(238 mm)
250
5" BOLT
CIRCLE DIA
8N" DIA
(218 mm)
Bottom View
Bottom View
9C" DIA
4N"
(116 mm)
9C" DIA
(238 mm)
Low Level Luminaires
VRB1 / VRB2 / VRB3 / VRB4 / VSB1 / VSB2 Vandal Resistant Bollards
FEATURES
VRB1, VRB3 and VSB1 horizontal louvers provide 360° of down-lighting with total
lamp source cutoff above 90° horizontal
•
VRB2 and VRB4 horizontal louvers provide 210° of cutoff down-lighting and
vertical louvers provide 150° of non-cutoff accent lighting
•
VSB2 horizontal louvers provide 270° of cutoff down-lighting and
vertical louvers provide 90° of non-cutoff accent lighting
•
Designed for lighting walkways, entrances, courtyards, and landscaped areas
where fixtures are viewable from all directions
•
Battery back-up, emergency battery pack and houseside shield options available
VRB1
VRB2
VRB3
VRB4
VSB1
VSB2
L OW L E V E L
•
ORDERING. INFORMATION (Example)
10L2K
VRB1
ELECTRICAL MODULE
FIXTURE
VRB1 Domed Round,
VRB2
VRB3
VRB4
VSB1
VSB2
360° downlighting
Domed Round,
210° downlighting,
150° accent lighting
Flat Round,
360° downlighting
Flat Round,
210° downlighting,
150° accent lighting
Square,
360° downlighting
Square,
210° downlighting,
150° accent lighting
LED
Source
10L IES
Type 1 LED
15L IES
Type 3 LED
20L IES
Color Temperature
2K Amber
3K 3000K
4K 4200K
5K 5100K
Voltages
UV Universal Voltage
(120 thru 277)
Type 5 LED
(203 mm)
6"
(152 mm)
9"
(229 mm)
36"
(914 mm)
LIGHT
CENTER
HEIGHT
9"
(914 mm)
LIGHT
CENTER
HEIGHT
VSB1 - Single Function
Luminaire
8" DIA
HS Houseside Shield
EM Battery Back-up
42"*
3L"
VRB3
Single Function
Flat Top
(1067 mm)
VRB4
Dual Fuction
Flat Top
1K"
(38 mm)
ANCHOR BOLT PROJ
(95mm)
CONDUIT
OPENING
5" (127 mm)
BOLT CIRCLE DIA
VSB2 - Dual Function
Luminaire
(203 mm)
7"
(178 mm)
(229 mm)
36"
42"*
(1067 mm)
8" DIA
(203 mm)
(203 mm)
6"
OPTIONS
VANDAL RESISTANT SQUARE BOLLARD
Maximum weight: 35 lb
VRB2 - Dual Function
Luminaire
8" DIA
(152 mm)
LUMINAIRE FINISH
BL Black
DB Dark Bronze
LG Light Gray
SG Stealth Gray
PS Platinum Silver
WH White
CC Custom Color*
*Consult representative
VANDAL RESISTANT BOLLARD
Maximum weight: 30 lb
VRB1 - Single Function
Luminaire
8" DIA
HS
BL
7"
10"
(178 mm)
(254 mm)
36"
(914 mm)
LIGHT
CENTER
HEIGHT
8" DIA
(203 mm)
8"
10"
(203 mm)
(254 mm)
3C"
(86 mm)
CONDUIT
OPENING
36"
43"
(1092 mm)
(914 mm)
LIGHT
CENTER
HEIGHT
5" (127 mm)
BOLT CIRCLE DIA
43"
(1092 mm)
BASE PLAN
VSB ALUMINUM
SHAFT
BASE PLAN
VRB ALUMINUM
SHAFT
*30" OR 36"
OVERALL HEIGHT AVAILABLE
CONTACT KIM REPRESENTATIVE
(27K" ABSOLUTE MINIMUM)
1K"
(38 mm)
ANCHOR BOLT PROJ
1K"
*30" OR 36"
OVERALL HEIGHT AVAILABLE
CONTACT KIM REPRESENTATIVE
(27K" ABSOLUTE MINIMUM)
(38 mm)
ANCHOR BOLT PROJ
251
Low Level Luminaires
VRBC and VSBC Concrete family of Vandal Resistant Bollards
VSB2C
FEATURES
L OW L E V E L
VRB1C
•
VRB1C, VRB3C and VSB1C horizontal louvers provide 360° of down-lighting with
total lamp source cutoff above 90° horizontal
•
VRB2C and VRB4C horizontal louvers provide 210° of cutoff down-lighting and
vertical louvers provide 150° of non-cutoff accent lighting
•
VSB2C horizontal louvers provide 270° of cutoff down-lighting and
vertical louvers provide 90° of non-cutoff accent lighting
•
Designed for lighting walkways, entrances, courtyards, and landscaped areas
where fixtures are viewable from all directions
•
Battery back-up, emergency battery pack and houseside shield options available
ORDERING. INFORMATION (Example)
10L2K
VRB1C
ELECTRICAL MODULE
FIXTURE
VRB1C Domed Round,
VRB2C
VRB3C
VRB4C
VSB1C
VSB2C
BL
360° downlighting
Domed Round,
210° downlighting,
150° accent lighting
Flat Round,
360° downlighting
Flat Round,
210° downlighting,
150° accent lighting
Square,
360° downlighting
Square,
210° downlighting,
150° accent lighting
LED
Source
10L IES
Type 1 LED
15L IES
Type 3 LED
20L IES
Color Temperature
2K Amber
3K 3000K
4K 4200K
5K 5100K
Voltages
UV Universal Voltage
(120 thru 277)
Type 5 LED
HS
—
LUMINAIRE FINISH
BL Black
DB Dark Bronze
LG Light Gray
SG Stealth Gray
PS Platinum Silver
WH White
CC Custom Color*
OPTIONS
HS Houseside Shield
EM Battery Back-up
*Consult representative
CONCRETE FINISH
BR-C Brown
CH-C Charcoal
NG-C Natural Gray
WH-C White
Available colors integral
in concrete mix
For additional information on concrete
bollards consult specifications sheet.
VANDAL RESISTANT BOLLARD
Maximum weight: 30 lb
VRB1 - Single Function
Luminaire
8" DIA
(203 mm)
6"
(152 mm)
9"
(229 mm)
36"
(914 mm)
LIGHT
CENTER
HEIGHT
VANDAL RESISTANT SQUARE BOLLARD
Maximum weight: 35 lb
VRB2 - Dual Function
Luminaire
8" DIA
6"
(152 mm)
9"
(914 mm)
LIGHT
CENTER
HEIGHT
42"*
3L"
VRB3
Single Function
Flat Top
(1067 mm)
VRB4
Dual Fuction
Flat Top
1K"
(38 mm)
ANCHOR BOLT PROJ
252
(95mm)
CONDUIT
OPENING
5" (127 mm)
BOLT CIRCLE DIA
VSB2 - Dual Function
Luminaire
(203 mm)
7"
(178 mm)
(229 mm)
36"
42"*
(1067 mm)
8" DIA
(203 mm)
(203 mm)
VSB1 - Single Function
Luminaire
8" DIA
7"
10"
(178 mm)
(254 mm)
36"
(914 mm)
LIGHT
CENTER
HEIGHT
8" DIA
(203 mm)
8"
10"
(203 mm)
(254 mm)
3C"
(86 mm)
CONDUIT
OPENING
36"
43"
(1092 mm)
(914 mm)
LIGHT
CENTER
HEIGHT
5" (127 mm)
BOLT CIRCLE DIA
43"
(1092 mm)
BASE PLAN
VSB ALUMINUM
SHAFT
BASE PLAN
VRB ALUMINUM
SHAFT
*30" OR 36"
OVERALL HEIGHT AVAILABLE
CONTACT KIM REPRESENTATIVE
(27K" ABSOLUTE MINIMUM)
1K"
(38 mm)
ANCHOR BOLT PROJ
1K"
*30" OR 36"
OVERALL HEIGHT AVAILABLE
CONTACT KIM REPRESENTATIVE
(27K" ABSOLUTE MINIMUM)
(38 mm)
ANCHOR BOLT PROJ
Low Level Luminaires
CB Compact Bollard
FEATURES
•
Kim’s Compact LED Bollard features full overlapping louvers to provide total light
cutoff above horizontal
A completely gasketed glass globe utilizes prismatics to optimize and control
the light. With recommended coated lamps, a smooth wash of light is achieved
with no shadows from the vertical supports
•
Battery back-up, emergency battery pack and houseside shield options available
L OW L E V E L
•
CB24
ORDERING. INFORMATION (Example)
CB24
20L2K
HS
WH
FIXTURE FINISH
BL Black
DB Dark Bronze
LG Light Gray
SG Stealth Gray
PS Platinum Silver
WH White
CC Custom Color*
FIXTURE
CB24 Compact Bollard,
24" height
CB32 Compact Bollard,
32" height
OPTIONS
HS Houseside Shield
EM Battery Back-up
*Consult representative
ELECTRICAL MODULE
LED
Source
10L Type 1 LED
15L Type 3 LED
20L Type 5 LED
Color Temperature
2K 580nm
3K 3000K
4K 4200K
5K 5100K
Voltages
UV Universal Voltage
(120 thru 277)
HID to LED Replacement Kit available.
Contact factory.
CB COMPACT BOLLARDS
CB24
Maximum
weight: 17 lb
CB32
Maximum
weight: 20 lb
6" DIA
(152 mm)
(457 mm)
LIGHT
CENTER
HEIGHT
5" DIA
6"
(127 mm)
(152 mm)
6"
(152 mm)
18"
6" DIA
(152 mm)
24"
26"
(610 mm)
(660 mm)
LIGHT
CENTER
HEIGHT
5" DIA
(127 mm)
2K"MIN
1L" DIA
(45 mm)
CONDUIT
OPENING
32"
(813 mm)
2E" (73
mm)
BOLT CIRCLE DIA
5" DIA
(127 mm)
BASE PLAN
CB
(64 mm)
2K" MIN
(63 5 mm)
253
Low Level Luminaires
SL1 / SL3 / SL5 Site Lightforms Bollards
®
FEATURES
SL1
•
SL fixtures are specifically designed and engineered to combine contemporary
form with rugged cast aluminum vandal resistant construction
•
New energy efficient LED modules, up to 36 LEDs, are now available for
Site Lightforms Bollard models
•
SL1 and SL3 offer path lighting with full-cutoff optics. SL5 offers
path lighting with semi cutoff optics
•
One-piece extruded aluminum shafts for a clean sharp cornered
appearance with superior strength
•
Battery back-up, emergency battery pack and houseside shield options available
L OW L E V E L
SL3
SL5
ORDERING. INFORMATION (Example)
SL1
18L3K120
FIXTURE
SL1 Site Lightforms
SL3 Site Lightforms
SL5 Site Lightforms
WH
ELECTRICAL MODULE
LED
Color Temperature
2K Amber
3K 3000K
4K 4200K
5K 5100K
18L LEDs5
36L LEDs5
Voltages
UV Universal Voltage
(120 thru 277)
FIXTURE FINISH
BL Black
DB Dark Bronze
LG Light Gray
SG Stealth Gray
PS Platinum Silver
WH White
CC Custom Color*
*Consult representative
SL1 SITE LIGHTFORMS
Maximum
8"
weight: 37 lb
8"8E"
3B"
(225 mm)
(203 mm)
(203 mm)
8E"
(79 mm) (225 mm)
8"
(203 mm)
4K"
9D"
(114 mm)
(245 mm)
37K"
(953 mm)
LIGHT
CENTER
HEIGHT
42"*
(1067 mm)
8K" (216 mm)
BOLT CIRCLE DIA.
3B"
(80 mm)
*36" OVERALL HEIGHT
AVAILABLE - CONTACT
KIM REPRESENTATIVE
FRONT
SL3 SITE LIGHTFORMS
Maximum
8"
weight: 39 lb
(203 mm)
BASE PLAN
SL1
SIDE
8E"
SL5 SITE LIGHTFORMS
Maximum
8"
weight: 37 lb
3B"
(225 mm)
(79 mm)
(203 mm)
8"
(133 mm)
(108 mm)
8"
9"
(203 mm)
5J"
4J"
4J"
(108 mm)
(203 mm)
(229 mm)
9D"
9D"
(245 mm)
(245 mm)
37K"
(953 mm)
LIGHT
CENTER
HEIGHT
42L"*
(1086 mm)
8K" (216 mm)
BOLT CIRCLE DIA.
3B"
(80 mm)
*36L" OVERALL HEIGHT
(838 mm)
LIGHT
CENTER
HEIGHT
BASE PLAN
SL3
254
BASE PLAN
SL5
*36" OVERALL HEIGHT
AVAILABLE - CONTACT
KIM REPRESENTATIVE
FRONT
8K" (216 mm)
BOLT CIRCLE DIA.
33"
42"*
(1067 mm)
AVAILABLE - CONTACT
KIM REPRESENTATIVE
SIDE
FRONT
SIDE
Lightvault
®
LTV81FF / LTV82FF / LTV83FF Flat Frame Lens Ring
FEATURES
Composite pour boxes ship ahead to simplify installation
•
Sealed light engine prevents ingress of moisture and/or debris
•
Bluetooth enabled field-aiming allows for wireless adjustment and dimming
•
Available in spot, wall-wash, and narrow flood distributions
•
3000K, 4200K, and 5100K CCT
•
Optional Slip Resistant Lens, Hex Cell Louver, Prismatic Lens
LTV83FF
IN-GRADE
•
LTV82FF
LTV81FF
ORDERING. INFORMATION (Example)
LTV81FF/SP
ELECTRICAL MODULE
Source
Color Temperature
3K 3000K
36L 36 LEDs
4K 4200K
5K 5100K
FIXTURE
With Flat Frame Lens Ring
LTV81FF/SP
LTV81FF/NF
LTV81FF/WW
LTV82FF/SP
PL/RCA81
36L5KUV
Spot1,2
Narrow Flood1,2
Wall Wash1,2
FIXTURE OPTIONS1
SR Slip-Resistant Lens
HL Hex Cell Louver.
Voltage
UV Universal Voltage
(120 thru 277)
PL
18L 18 LEDs
Spot1,2
LTV82FF/NF Narrow Flood1,2
LTV82FF/WW Wall Wash1,2
LTV83FF/SP Spot1,2
RCA81
16L 16 LEDs
12L 12 LEDs
RCA82
RCA83
LTV83FF/NF Narrow Flood1,2
LTV83FF/WW Wall Wash
1
2
1,2
SP or NF only.
Best with spot optics
Prismatic Lens softens
distribution.
Rebar cage anchor
for RCA81
Rebar cage anchor
for RCA82
Rebar cage anchor
for RCA83
All lens options are integral parts of component
module and must be installed at factory.
Opening of Component Module on site will void
warranty
Pour Box rough-in housing ships separately and as a
quick-ship if requested.
LTV81FF
LTV83FF
4"
2"
(102 mm)
1"
(51 mm)
2"
7I" DIA
(25 mm)
8J"
(210 mm)
10"
(26 mm)
1"
(51 mm)
(202 mm)
(254 mm)
2 NPT Pipe Plugs
TOP
S DE
BOTTOM
3 NPT Pipe Plugs
TOP
S DE
BOTTOM
LTV82FF
DEBRIS SHIELDS
4"
2"
(102 mm)
(51 mm)
9E"
P C
NP
N O OM
P C
(250 mm)
3 NPT Pipe Plugs
TOP
SIDE
LTV81
LTV82
LTV83
BOTTOM
255
Lightvault
®
LTV81SS / LTV82SS / LTV83SS Stainless Steel Lens Ring
IN-GRADE
FEATURES
LTV82SS
LTV83SS
•
Composite pour boxes ship ahead to simplify installation
•
Sealed light engine prevents ingress of moisture and/or debris
•
Bluetooth enabled field-aiming allows for wireless adjustment and dimming
•
Available in spot, wall-wash, and narrow flood distributions
•
3000K, 4200K, and 5000K CCT
•
Optional Slip Resistant Lens, Hex Cell Louver, Prismatic Lens
LTV81SS
ORDERING. INFORMATION (Example)
LTV81SS/SP
ELECTRICAL MODULE
Source
FIXTURE
With Flat Frame Lens Ring
LTV81SS/SP
LTV81SS/NF
LTV81SS/WW
LTV82SS/SP
LTV82SS/NF
PL/RCA81
36L5KUV
Spot1,2
36L 36 LEDs
Narrow Flood1,2
Wall Wash1,2
Spot1,2
Color Temperature
3K 3000K
4K 4200K
5K 5100K
Voltage
UV Universal Voltage
(120 thru 277)
PL
18L 18 LEDs
RCA81
Narrow Flood1,2
16L 16 LEDs
12L 12 LEDs
LTV82SS/WW Wall Wash1,2
LTV83SS/SP Spot1,2
LTV83SS/NF Narrow Flood1,2
FIXTURE OPTIONS1
SR Slip-Resistant Lens
HL Hex Cell Louver.
RCA82
RCA83
LTV83SS/WW Wall Wash1,2
1
2
SP or NF only.
Best with spot optics
Prismatic Lens softens
distribution.
Rebar cage anchor
for RCA81
Rebar cage anchor
for RCA82
Rebar cage anchor
for RCA83
All lens options are integral parts of component
module and must be installed at factory.
Opening of Component Module on site will void
warranty
Pour Box rough-in housing ships separately and as a
quick-ship if requested.
LTV83SS
LTV81SS
13" DIA
(332 mm)
4"
(102 mm)
2"
(51 mm)
7I" DIA
2"
(202 mm)
(254 mm)
(26 mm)
(25 mm)
8J"
1"
(210 mm)
(26 mm)
10"
1"
1"
(51 mm)
2 NPT Pipe Plugs
TOP
S DE
BOTTOM
3 NPT Pipe Plugs
TOP
S DE
BOTTOM
LTV82SS
DEBRIS SHIELDS
4"
10C" DIA
2"
(102 mm)
(263 mm)
(51 mm)
P C
9E"
NP
N O OM
P C
(250 mm)
3 NPT Pipe Plugs
BOTTOM
256
LTV81
LTV82
LTV83
Lightvault
®
LTV81RG / LTV82RG / LTV83RG Rock Guard Lens Ring
FEATURES
Composite pour boxes ship ahead to simplify installation
•
Sealed light engine prevents ingress of moisture and/or debris
•
Bluetooth enabled field-aiming allows for wireless adjustment and dimming
•
Available in spot, wall-wash, and narrow flood distributions
•
3000K, 4200K, and 5100K CCT
•
Rock guard for lens protection
LTV83RG
IN-GRADE
•
LTV82RG
LTV81RG
ORDERING. INFORMATION (Example)
LTV81RG/SP
ELECTRICAL MODULE
Source
FIXTURE
With Flat Frame Lens Ring
LTV81RG/SP
LTV81RG/NF
LTV81RG/WW
LTV82RG/SP
LTV82RG/NF
LTV82RG/WW
LTV83RG/SP
LTV83RG/NF
2
Color Temperature
3K 3000K
4K 4200K
5K 5100K
36L 36 LEDs
Spot1,2
Narrow Flood1,2
Wall Wash1,2
FIXTURE OPTIONS1
SR Slip-Resistant Lens
HL Hex Cell Louver.
Voltage
UV Universal Voltage
(120 thru 277)
PL
18L 18 LEDs
Spot1,2
RCA81
Narrow Flood1,2
Wall Wash1,2
16L 16 LEDs
12L 12 LEDs
Spot1,2
RCA82
RCA83
Narrow Flood1,2
LTV83RG/WW Wall Wash
1
PL/RCA81
36L5KUV
1,2
SP or NF only.
Best with spot optics
Prismatic Lens softens
distribution.
Rebar cage anchor
for RCA81
Rebar cage anchor
for RCA82
Rebar cage anchor
for RCA83
All lens options are integral parts of component
module and must be installed at factory.
Opening of Component Module on site will void
warranty
Pour Box rough-in housing ships separately and as a
quick-ship if requested.
LTV81RG
LTV83RG
13" DIA
(332 mm)
1G"
4"
(37 mm) (102 mm)
2"
(51 mm)
7I" DIA
E"
(22 mm)
(202 mm)
1"
10"
1"
1"
(25 mm)
8J"
(26 mm)
(254 mm)
(26 mm)
2"
(51 mm)
(210 mm)
3 NPT Pipe Plugs
3 NPT Pipe Plugs
TOP
SIDE
TOP
S DE
BOTTOM
LTV82
LTV83
BOTTOM
LTV82RG
DEBRIS SHIELDS
4"
1B"
10C" DIA
2"
(29 mm) (102 mm)
(264 mm)
1"
(51 mm)
9E"
(26 mm)
C
3 NPT Pipe Plugs
TOP
N
N O OM
C
(250 mm)
SIDE
LTV81
BOTTOM
257
Lightvault
®
LTV81HS / LTV82HS / LTV83HS Half Shield Lens Ring
IN-GRADE
FEATURES
LTV83HS
LTV81HS
LTV82HS
•
Composite pour boxes ship ahead to simplify installation
•
Sealed light engine prevents ingress of moisture and/or debris
•
Bluetooth enabled field-aiming allows for wireless adjustment and dimming
•
Available in spot, wall-wash, and narrow flood distributions
•
3000K, 4200K, and 5100K CCT
•
Half shield provides glare protection
ORDERING. INFORMATION (Example)
LTV81HS/SP
ELECTRICAL MODULE
Source
Color Temperature
3K 3000K
36L 36 LEDs
4K 4200K
5K 5100K
FIXTURE
With Flat Frame Lens Ring
LTV81HS/SP
LTV81HS/NF
LTV81HS/WW
LTV82HS/SP
LTV82HS/NF
PL/RCA81
36L5KUV
Spot1,2
Narrow Flood1,2
Wall Wash1,2
FIXTURE OPTIONS1
SR Slip-Resistant Lens
HL Hex Cell Louver.
Voltage
UV Universal Voltage
(120 thru 277)
PL
18L 18 LEDs
Spot1,2
RCA81
Narrow Flood1,2
LTV82HS/WW Wall Wash
LTV83HS/SP Spot1,2
16L 16 LEDs
12L 12 LEDs
1,2
RCA82
RCA83
LTV83HS/NF Narrow Flood1,2
LTV83HS/WW Wall Wash1,2
1
2
SP or NF only.
Best with spot optics
Prismatic Lens softens
distribution.
Rebar cage anchor
for RCA81
Rebar cage anchor
for RCA82
Rebar cage anchor
for RCA83
All lens options are integral parts of component
module and must be installed at factory.
Opening of Component Module on site will void
warranty
Pour Box rough-in housing ships separately and as a
quick-ship if requested.
LTV81HS
LTV83HS
4A"
(103 mm)
13" DIA
(332 mm)
4"
(102 mm)
24°
3 NPT
Pipe Plugs
2K"
7I" DIA
(64 mm)
(202 mm)
24°
1"
1"
(26 mm)
2"
(51 mm)
2"
LTV82HS
SIDE
TOP
4"
(102 mm)
3 NPT
Pipe Plugs
P C
9E"
1"
N
P C
NP
OM
(250 mm)
(26 mm)
LTV81
2"
258
BOTTOM
DEBRIS SHIELDS
3B"
24°
TOP
SIDE
BOTTOM
(79 mm)
9E" DIA
(250 mm)
(210 mm)
(254 mm)
(51 mm)
TOP
2 NPT
Pipe Plugs
8J"
(26 mm)
10"
1"
(25 mm)
SIDE
(51 mm)
BOTTOM
LTV82
LTV83
Lightvault
®
LTV81EB / LTV82EB / LTV83EB Eyeball Lens Ring
FEATURES
Composite pour boxes ship ahead to simplify installation
•
Sealed light engine prevents ingress of moisture and/or debris
•
Bluetooth enabled field-aiming allows for wireless adjustment and dimming
•
Available in spot, wall-wash, and narrow flood distributions
•
3000K, 4200K, and 5100K CCT
•
For applications that require lamp tilt
IN-GRADE
•
LTV83EB
LTV82EB
LTV81EB
ORDERING. INFORMATION (Example)
LTV81EB/SP
ELECTRICAL MODULE
Source
FIXTURE
With Flat Frame Lens Ring
LTV81EB/SP
LTV81EB/NF
LTV81EB/WW
LTV82EB/SP
LTV82EB/NF
LTV82EB/WW
LTV83EB/SP
LTV83EB/NF
LTV83EB/WW
1
2
PL/RCA81
36L5KUV
18L 18 LEDs
Spot1,2
Narrow Flood1,2
16L 16 LEDs
12L 12 LEDs
Wall Wash1,2
Spot1,2
Color Temperature
3K 3000K
4K 4200K
5K 5100K
FIXTURE OPTIONS1
SR Slip-Resistant Lens
HL Hex Cell Louver.
Voltage
UV Universal Voltage
(120 thru 277)
PL
RCA81
Narrow Flood1,2
Wall Wash1,2
RCA82
8L 8 LEDs
Spot1,2
Narrow Flood
RCA83
1,2
Wall Wash1,2
SP or NF only.
Best with spot optics
Prismatic Lens softens
distribution.
Rebar cage anchor
for RCA81
Rebar cage anchor
for RCA82
Rebar cage anchor
for RCA83
All lens options are integral parts of component
module and must be installed at factory.
Opening of Component Module on site will void
warranty
Pour Box rough-in housing ships separately and as a
quick-ship if requested.
LTV81EB
30°
15°
3E"
LTV83EB
2F"
(98 mm) 15°
13" DIA
4"
(332 mm)
(102 mm)
3 NPT
Pipe Plugs
30°
15°
(56 mm)
7G" DIA
(189 mm)
15°
2"
2 NPT
Pipe Plugs
(51 mm)
1"
8J"
1"
10"
(26 mm)
(210 mm)
(26 mm)
(254 mm)
1"
(25 mm)
2"
(51 mm)
SIDE
TOP
LTV82EB
2O"
TOP
S DE
BOTTOM
DEBRIS SHIELDS
30°
15°
(72 mm)
9E" DIA
(250 mm)
BOTTOM
15°
3 NPT
Pipe Plugs
4"
(102 mm)
P C
1"
N
P C
NP
OM
9E"
(26 mm)
(250 mm)
LTV81
2"
LTV82
LTV83
(51 mm)
TOP
S DE
BOTTOM
259
Lightvault
®
LTV81DM / LTV82DM / LTV83DM Directional Marker
IN-GRADE
FEATURES
LTV83DM
LTV82DM
•
Composite pour boxes ship ahead to simplify installation
•
Sealed light engine prevents ingress of moisture and/or debris
•
Bluetooth enabled allows for wireless dimming
•
3000K, 4200K, and 5100K CCT
•
Directional marker for drive way applications or path finding
LTV81DM
ORDERING. INFORMATION (Example)
LTV81DM/SP
ELECTRICAL MODULE
Source
FIXTURE
Directional Marker
24L
12L
18L
9L
LTV81DMF Full1,2
LTV81DMH Half1,2
LTV82DF Full1,2
LTV82DH Half1,2
1
2
PL/RCA81
36L5KUV
24 LEDs
12 LEDs
18 LEDs
Color Temperature
3K 3000K
4K 4200K
5K 5100K
FIXTURE OPTIONS1
RCA81 Rebar cage anchor
Voltage
for RCA81
UV Universal Voltage
RCA82 Rebar cage anchor
(120 thru 277)
for RCA82
RCA83 Rebar cage anchor
for RCA83
9 LEDs
LTV83DMF Full1,2
12L 12 LEDs
LTV83DMH Half1,2
6L 6 LEDs
All lens options are integral parts of component
module and must be installed at factory.
Opening of Component Module on site will void
warranty
Pour Box rough-in housing ships separately and as a
quick-ship if requested.
LTV83DM
LTV81DM
13" DIA
1G"
(332 mm)
4"
(37 mm) (102 mm)
(51 mm)
7I" DIA
E"
(22 mm)
(202 mm)
(254 mm)
3 NPT Pipe Plugs
S DE
(Typical for LTV81DM
& LTV81DMH)
LTV82DM
1B"
10C" DIA
1"
(26 mm)
TOP
260
SIDE
(Typical for LTV83DMF
& LTV83DMH)
BOTTOM
BOTTOM
DEBRIS SHIELDS
4"
2"
(29 mm) (102 mm)
(264 mm)
(25 mm)
2 NPT Pipe Plugs
TOP
TOP
1"
(210 mm)
(26 mm)
10"
2"
(51 mm)
8J"
1"
1"
(26 mm)
2"
(51 mm)
9E"
P C
P
N O OM
P C
(250 mm)
SIDE
(Typical for LTV82DMF
& LTV82DMH)
3 NPT Pipe Plugs
BOTTOM
LTV81
LTV82
LTV83
Minivault
In-grade Lighting
FEATURES
Designed to be exposed to the most abusive environment of all lighting systems
•
Introducing 3 diode energy efficient LED models
•
In-grade and above grade components are solid heavy cast bronze
•
Seals are engineered to perform flawlessly, sealing tight after relamping
•
Available options include hex cell louver and prismatic spread lens
IN-GRADE
•
KLV360
KLV361
KLV365
KLV366
ORDERING. INFORMATION (Example)
KLV361
FIXTURE
12 VOLT LED
KLV361 LED
KLV366 LED
3L5K
DB
ELECTRICAL MODULE
FIXTURE FINISH
12 VOLT LED ONLY
Source
3L 3 LEDs
Color Temperature
2K 580nm
3K 3000K
4K 4200K
5K 5100K
PL73
ALUMINUM
BL Black
FIXTURE OPTIONS
HL73 Hex Cell Louver for
brightness control3
DB Dark Bronze
GR Verde Green
PL73 Prismatic Spread
Lens softens lamp
distribution.
Best with flood lamps
SL73 Spread Lens creates
oval beam pattern.
Best with spot lamps
L12 Hex Cell Louver clips
to MR16 lamp4
KLV360/KLV361/KLV365/KLV366 MINIVAULT
6" DIA
(152 mm)
19
15˚
15˚
32"
15˚
15˚
32"
(15 mm)
517 32"
517 32"
3"
(76 mm)
(141 mm)
2B" DIA
(54 0 mm
(141 mm)
340°
Optical Adjustment
TOP
19
(15 mm)
Low Voltage Cable Exit
6J" DIA
6J" DIA
(159 mm)
(159 mm)
KLV360
1"
(25 mm)
L12
MR16 LAMP
ONLY
KLV365
261
Micro-Flood
Accent Lighting
FEATURES
LANDSCAPE
EL218
•
Unique swivel mount provides superior aiming without loosening over time
•
Available in die-cast aluminum with powder coat paint finish for excellent
value and rugged service
•
Energy efficient LED module is available in 120 thru 277 volts
ORDERING. INFORMATION (Example)
EL218S3
FIXTURE
EL218S3
EL218F3
EL218S5
EL218F5
UV
8L3K
BL
BD215
FIXTURE FINISH
350mA Spot
MOUNTING OPTIONS
EP17 Landscape Light Post Mount
JB1 Architectural J-box3
J-25N Portable Spear Mount3
JBR-2 Brass In-grade J-box
ALUMINUM
BL Black
350mA Narrow Flood
DB Dark Bronze
GR Verde Green
550mA Spot
550mA Narrow Flood
EP17
(2) K" NPT in bottom
JBR-3 Brass In-grade J-box
(2) L" NPT in bottom
ELECTRICAL MODULE
Source
Color Temperature
8L 8 LEDs, 10W
3K 3000K
For 350mA
4K 4200K
8 LEDs, 16W
5K 5100K
2
Extruded aluminum, fully adjustable.
Provides beam and glare control.
Formed .062 thick aluminum.
Provides glare control.
3
with cord
SM18 Stanchion Mount3
J-27N Surface Mount3
JW Architectural Wall Mount3
Voltage
UV Universal Voltage
from 120 to 277V
with a ±10%
tolerance
For 550mA
1
(2) K" NPT in sides,
(2) K" NPT in bottom
JBR-24 Brass In-grade J-box
(4) K" NPT in sides,
(2) K" NPT in bottom
JBR-30 Brass In-grade Staked J-box
JBR-32 Brass In-grade Staked J-box
FIXTURE OPTIONS
BD215 Optional Barn Doors1
FH215 Optional Fixed Hood2
VOLTAGE
JBR-21 Brass In-grade J-box
Specify finish, BL - Black,
DB - Dark Bronze, GR - Verde Green.
MICRO-FLOOD ACCENT LIGHTING
5K"
(140 mm)
1C"
3"
(35 mm)
(76 mm)
116°
64°
5K"
(140 mm)
3L"
4B"
(95 mm)
(105 mm)
1L"
6J"
(45 mm)
(159 mm)
K" NPT
2B"
(54 mm)
SIDE
262
FRONT
BD215
BARN DOOR
FH215
FIXED HOOD
Scarab
™
Accent Lighting
FEATURES
C700/9L
LED light sources with sealed light engine
•
Spot illumination for dramatic lighting, narrow flood distributions for accent lighting
•
The Scarab series combines integrated design and application flexibility to produce
a landscape accent system that meets the broadest range of illumination needs
•
Unique swivel mount provides superior aiming without loosening over time
•
Available in aluminum finish for excellent value and rugged service, or brass
offering long life and natural weathering that blends into the landscape
EL700/12L
EL700/7L
ORDERING. INFORMATION (Example)
C700S3
–
7L3K
BRASS FIXTURE
C700S3 350mA Spot
C700F3 350mA Narrow Flood
ALUMINUM FIXTURE
EL700S3 350mA Spot
EL700F3 350mA Narrow Flood
VG
FIXTURE FINISH
BRASS
NB Natural Brass
VG Verde Green
Patina
ALUMINUM
BL Black
DB Dark Bronze
GR Verde Green
AGS73
JBR-2
FIXTURE OPTIONS
MOUNTING OPTIONS
7 LED
AGS72 Adjustable Glare Shield1,2
FGS72 Full Glare Shield1,2
DS72 Debris Screen for
Full Glare Shield
120 VOLT MOUNTING OPTIONS
EP17 Landscape Light Post
Mount
JB1 Architectural J-box2
J-25N
JBR-2
9 LED
AGS73 Adjustable Glare Shield1,2
FGS73 Full Glare Shield1,2
DS73 Debris Screen for
Full Glare Shield
JBR-3
JBR-21
12 LED
JBR-24 Brass in-grade J-box
(4) K" NPT in sides,
(2) K" NPT in bottom
2 JBR-30 Brass in-grade staked
Portable Spear Mount
J-box
Brass in-grade J-box
JBR-32 Brass in-grade staked
(2) K" NPT in bottom
J-box
Brass in-grade J-box
with cord
(2) L" NPT in bottom
SM18 Stanchion Mount2
Brass in-grade J-box
J-27N Surface Mount2
(2) K" NPT in sides,
JWBR Brass Architectural
(2) K" NPT in bottom
Wall Mount2
AGS74 Adjustable Glare Shield1,2
FGS74 Full Glare Shield1,2
DS74 Debris Screen for
Full Glare Shield
ELECTRICAL MODULE
VOLTAGE
UV Universal Voltage from 120 to
Source
Color Temperature
7L 7 LEDs, 9W
3K 3000K
9L 9 LEDs, 11W
4K 4200K
12L 12 LEDs, 14W 5K 5100K
1
277V with a ±10% tolerance
2
Replaces standard lens ring/hood
on fixture.
Finish to match fixture. Specify
finish, BL - Black, DB - Dark Bronze,
GR - Verde Green.
SCARAB ACCENT LIGHT NG
C700/7L
EL700/7L
C700/9L
EL700/9L
6D"r.
5A"
(168 mm)
4M"
(191 mm)
2B"
(54 mm)
5D"
(143 mm)
4M"
(106 mm)
(92 mm)
(87 mm)
(143 mm)
2B"
AGS73
(54 mm)
6D"
K" NPT
(168 mm)
K" NPT
C700/9L
EL700/9L
4A" DIA.
FGS72
DS72
Debris screen for FGS
Full Glare Shield only
2B"
(54 mm)
AGS74
8L"
(222 mm)
K" NPT
C700/12L
EL700/12L
5N" DIA.
(141 mm)
(103 mm)
31° cutoff
5D"
(145 mm)
(110 mm)
C700/7L
EL700/7L
3G" DIA.
(165 mm)
5H" DIA.
(130 mm)
4F" DIA.
3D"
AGS72
(262 mm)
6K"
5B"
4K"
(91 mm)
10M"
6L"
(229 mm)
(114 mm)
3N" DIA.
(241 mm)
(172 mm)
9"
(129 mm)
7K"
(110 mm)
9K"r.
C700/12L
EL700/12L
8"r.
(203 mm)
31 5° cutoff
FGS73
DS73
Debris screen for FGS
Full Glare Shield only
32° cutoff
FGS74
DS74
Debris screen for FGS
Full Glare Shield only
263
LANDSCAPE
•
Scarab
™
Accent Lighting
FEATURES
KLVL711
LANDSCAPE
KLVL716
•
LED light sources with sealed light engine
•
Narrow flood distributions for accent lighting
•
The Scarab series combines integrated design and application flexibility to produce
a landscape accent system that meets the broadest range of illumination needs
•
Unique swivel mount provides superior aiming without loosening over time
•
Available in aluminum finish for excellent value and rugged service, or brass
offering long life and natural weathering that blends into the landscape
ORDERING. INFORMATION (Example)
KLVL716
VG
AGS71
JBR-2
FIXTURE FINISH
FIXTURE OPTIONS
MOUNTING OPTIONS
BRASS
NB Natural Brass
VG Verde Green
Patina
ALUMINUM
BL Black
3 LED
HL71 Hex Cell Louvers1,2
SL71 Spread Lens1,3
120 VOLT MOUNTING OPTIONS
EP17 Landscape Light Post
Mount
KLV400 Low Voltage Spear
Mount
KLV405 Low Voltage Surface
Mount
KLV410 Sealed Connector
3L3K
BRASS FIXTURE
KLVL716 Narrow Flood
ALUMINUM FIXTURE
KLVL711 Narrow Flood
DB Dark Bronze
GR Verde Green
PL71
AGS71
FGS71
DS71
Prismatic Lens1,3
4,5
Adjustable Glare Shield
Full Glare Shield4,5
Debris Screen for
Full Glare Shield
ELECTRICAL MODULE 12V
Source
Color Temperature
3 LEDs, 10W
3K 3000K
Inserts behind lens into existing lens gasket.
Cannot be used in combination with SL Spread or PL
Prismatic Lens.
Cannot be used in combination with HL Hex Cell Louver.
Finished to match fixture.
Replaces standard lens ring/hood on fixture.
1
2
3
4
5
SCARAB ACCENT LIGHTING
5B"
2K"
(130 mm)
(64 mm)
3C"
2A" DIA
(85 7 mm)
(52 mm)
4E"r
(124 mm)
2B"
AGS71
3"
(76 mm)
2" DIA
K" NPT
KLV715/KLV710
(51 mm)
33.6° cutoff
FGS71
264
(54 mm)
DS71
Debris screen for FGS
Full Glare Shield only
KLV415
KLVTC24
KLV427
KLV432
KLVPC1
KLVPC2
Extension Module
Time Clock
#12-2 12 Volt Cable
#8-2 12 Volt Cable
Direct Mount Photocell
Remote Mount
Photocell
KLV432 #8-2 12 Volt Cable
KLV600 200W Above-grade
Transformer
KLV605 300W Above-grade
Transformer
KLV625 900W Above-grade
Transformer
KLV640 300W Below-grade
Transfromer, 120V
KLV660 300W Below-grade
Transfromer, 277V
KLV645 600W Below-grade
Transfromer, 120V
KLV665 600W Below-grade
Transfromer, 277V
Sign/Wall Lighter
Accent Lighting
FEATURES
4324
Linear luminaire for site and wall wash applications
•
Unique swivel mount provides superior aiming without loosening over time
•
Available in three sizes, utilizing Picoprism technology.
•
Options include multiple mounting configurations and optional fixed hood shields
to control light spill and nighttime glow
LANDSCAPE
•
ORDERING INFORMATION (Example)
4348P35
48L4KUV
FIXTURE
4324 25" Sign/Wall Lighter
LAMP
12L*KUV
24L*KUV
20L*KUV
36L*KUV
24L*KUV
48L*KUV
4336 37" Sign/Wall Lighter
4348 49" Sign/Wall Lighter
GR
SM18
FH36
FIXTURE FINISH
BL Black
DB Dark Bronze
GR Verde Green
FIXTURE OPTIONS
FH24 Optional Fixed Hood
MOUNTING OPTIONS
EP17 Landscape Light Post Mount
JB1 Architectural J-box2
J-25N Portable Spear Mount2
JBR-2 Brass In-grade J-box
for 43241
FH36 Optional Fixed Hood
for 43361
FH48 Optional Fixed Hood
(2) K" NPT in bottom2
for 43481
JBR-3 Brass In-grade J-box
JBR-4
* 3 = 3000K, 4 = 4200K, 5 = 5100K
JBR-5
JBR-21
JBR-24
JBR-30
JBR-32
SM18
1
2
(2) L" NPT in bottom2
Composite in-grade J-box (2)
L" NPT in bottom, (4) L" NPT
on sides @ 90°
Brass cover, composite in-grade
J-box (2) L" NPT in bottom,
(4) L" NPT on sides @ 90°
Brass In-grade J-box
(2) K" NPT in sides,
(2) K" NPT in bottom2
Brass In-grade J-box
(4) K" NPT in sides,
(2) K" NPT in bottom2
Brass In-grade Staked J-box2
Brass In-grade Staked J-box
with cord2
Stanchion Mount2
NOTES: Do not Do not aim down unless protected from
direct water spray. Do not exceed 60° backtilt aiming.
Unwired swivel may be attached to rigid pipe of appropriate
length for site soil conditions.
Electronic driver operates 120 thru 277 volts (50-60 Hz).
Electronic driver minimum starting temperature -40°C.
See p. 853 for fixture option & mounting option
dimension drawings.
Formed A" thick aluminum. Can be
mounted along the top of fixture to shield
lamp and lens from view. Mounts to pre
drilled holes in the fixture housing.
Specify finish, BL - Black, DB - Dark
Bronze, GR - Verde Green.
SIGN / WALL LIGHTER ACCENT LIGHTING
37"
25"
49"
(940 mm)
(635 mm)
(1245 mm)
ELECTRICAL
6J"
(159 mm)
9J"
12K"
(235 mm)
(318 mm)
4324
FRONT
12J"
10K"
(311 mm)
(267 mm)
4336
FRONT
4348
FRONT
backt lt
4J"
(108 mm)
4J"
2B"
(54 mm)
(76 mm)
4E"
4E"
SIDE
3"
(108 mm)
(124 mm) 7E"
(200 mm)
K" NPT TYP
SUPPORT
ONLY
60° MAX
60° MAX
backt lt
24K"
(622 mm)
(124 mm)
7E"
(200 mm)
K" NPT TYP
SIDE WITH
OPTIONAL
FIXED HOOD
2B"
(54 mm)
265
Traditional
Path Lighting
FEATURES
LANDSCAPE
Mushroom Hood
Cone Hood
•
Kim was one of the first producers of quality path lighters. These classic products
have been totally redesigned in die-cast brass and aluminum
•
Under-hood reflector increases efficiency. The solid hood support also allows
access for lamp maintenance without the use of a single tool
•
Because of a wide selection of hood designs, stem lengths and finishes, selecting
the combination of features that best suits a specific application is easy
Cone Hood
Pagoda Hood
ORDERING. INFORMATION (Example)
KLV188
UV
3L3K
BL
ALUMINUM FIXTURE
FIXTURE FINISH
12 VOLT1
KLV188 8" stem ht. LED
KLV190 13" stem ht.
ALUMINUM
BL Black
DB Dark Bronze
GR Verde Green
KLV195 20" stem ht.
120 VOLT
EL188 8" stem ht. LED
EL190 13" stem ht.
VOLTAGE
Voltage
UV Universal Voltage
EL195 20" stem ht.
from 120 to 277V
with a ±10%
tolerance
BRASS FIXTURE
12 VOLT1
KLV189 8" stem ht. LED
KLV192 13" stem ht.
KLV197 20" stem ht.
120 VOLT
BN189 8" stem ht. LED
BN192 13" stem ht.
ELECTRICAL MODULE
BN197 20" stem ht.
12 VOLT LED ONLY
Source
3L 3 LEDs
1
2
H60BL
JBR-2
HOODS
MOUNTING OPTIONS
ALUMINUM
H60BL Pagoda, Black
H60DB Pagoda, Dark Bronze
H60GR
H70BL
H70DB
H70GR
H80BL
H80DB
H80GR
H60NB
H60VG
H70NB
H70VG
H80NB
H80VG
12 VOLT
EP17 Landscape Light Post Mount
KLV400 Spear Mount2
Pagoda, Verde Green
Mushroom, Black
Mushroom, Dark Bronze
Mushroom, Verde Green
Cone, Black
Cone, Dark Bronze
Cone, Verde Green
EP17
JB1
J-25N
JBR-2
JBR-3
COPPER
Pagoda, Natural
JBR-21
Pagoda, Verde Green Patina
JBR-24
Mushroom, Natural
Mushroom, Verde Green Patina
Cone, Natural
Cone, Verde Green Patina
120 VOLT
Landscape Light Post Mount
Architectural J-box2
Portable Spear Mount
In-grade J-box (2) K" NPT
in bottom
In-grade J-box (2) L" NPT
in bottom
In-grade J-box (2) K" NPT
in sides, (2) K" NPT in bottom
In-grade J-box (4) K" NPT
in sides, (2) K" NPT in bottom
Brass in-grade staked J-box
JBR-30
JBR-32 Brass in-grade staked J-box
with cord
Color Temperature
L2K 580nm
L3K 3000K
L4K 4200K
L5K 5100K
Remote transformer required.
Specify finish, BL - Black,
DB - Dark Bronze, GR - Verde Green.
7G"
DIA
(189 mm)
16B" DIA
12C" DIA
(410 mm)
17F" (8" stem)
14O" (8" stem)
22F" (13" stem)
19O" (13" stem)
(437 mm)
8" stem
(203 mm)
13" stem
(564 mm)
29F" (20" stem)
(741 mm)
(330 mm)
8" stem
(503 mm)
13" stem
(681 mm)
(203 mm)
20" stem
(508 mm)
(508 mm)
Pagoda Hood
14F" (8" stem)
(376 mm)
(330 mm)
20" stem
266
(314 mm)
Mushroom Hood
26O" (20" stem)
(360 mm)
19F" (13" stem)
8" stem
(487 mm)
13" stem
(665 mm)
26F" (20" stem)
(203 mm)
(330 mm)
20" stem
(508 mm)
Cone Hood
Ravenna
™
Highlighter & Lowlighter
FEATURES
•
Available in both 12 volt and 120 volt, the Ravenna Highlighter and
Lowlighter companions are highly adaptable to a range of landscape accent and
path lighting solutions
Elegance and style in leaf-like design with slender body that blends into
natural surroundings
•
120 volt option includes integrated electronic stepdown transformer when
distance between fixtures and power source make 12 volt
distribution impractical
LANDSCAPE
•
Ravenna
Highlighter
Ravenna
Lowlighter
ORDERING. INFORMATION (Example)
BN176
ELECTRICAL MODULE
HIGHLIGHTER FIXTURE
12 VOLT1
LED
KLVL176 Brass
KLVL171 Aluminum
UV
3L5K
12/120/277 VOLT LED ONLY
Source Color Temperature
3L 3 LEDs
3K 3000K
UV 120/277 VOLT
LED
BNL176 Brass
ELL171 Aluminum
VG
FIXTURE FINISH
BRASS
NB Natural Brass
VG Verde Green
Patina
ALUMINUM
BL Black
DB Dark Bronze
GR Verde Green
LOWLIGHTER FIXTURE
12 VOLT1
LED
KLVL276 Brass
KLVL271 Aluminum
VOLTAGE
UV 120/277 VOLT
UV VOLT LED 120/277
Voltage
UV Universal Voltage
from 120 to 277V
with a ±10%
tolerance
LED
ELL276 Brass
ELL271 Aluminum
HL
EP17
FIXTURE OPTIONS
MOUNTING OPTIONS
HL Hex Cell Louver for
EP17 Landscape Light Post Mount, 12V & 120V
brightness control2
KLV400 Spear Mount, 12V3
PL Prismatic Spread Lens
J-25N Portable Spear Mount, 120V, Lowlighter only
softens lamp distribution.
Best w/ flood2
KLV405 Surface Mount, 12V, Lowlighter only1
SL Linear Spread Lens
KLV415 Extension Mount, 12V, Lowlighter only3
creates oval beam pattern.
JB1 Architectural J-box, 12V & 120V3
Best w/ spot2
JBR-2 In-grade J-box (2) K" NPT in bottom,
12V & 120V
JBR-3 In-grade J-box (2) L" NPT in bottom,
12V & 120V
JBR-4 Composite in-grade J-box (2) K" NPT in
bottom, (4) NPT on sides @ 90°
JBR-5 Brass cover, composite in-grade J-box (2) K"
NPT in bottom, (4) NPT on sides @ 90°
JBR-21 In-grade J-box (2) K" NPT in sides,
(2) K" NPT in bottom, 12V & 120V
JBR-24 In-grade J-box (4) K" NPT in sides,
(2) K" NPT in bottom, 12V & 120V
JBR-30 Brass in-grade staked J-box, 12V & 120V
JBR-32 Brass in-grade staked J-box
with cord, 120V
1
2
3
Remote transformer required.
Inserts behind lens.
Specify finish, BL - Black,
DB - Dark Bronze, GR - Verde Green.
4
SM18 Stanchion Mount, 12V & 120V3
J-27N Surface Mount, 120V, Lowlighter only
JWBR Brass Architectural Wall Mount, 120V,
Specify finish, NB - Natural Brass,
VG - Verde Green Patina.
Lowlighter only4
JW Architectural Wall Mount, 120V,
Lowlighter only
RAVENNA HIGHLIGHTER
RAVENNA LOWLIGHTER
5M"
3D"
(135 mm)
5M"
3D"
(135 mm)
Electronic Stepdown
Transformer in base
120 Volt only
(92 mm)
(92 mm)
8E"
(225 mm)
23L"
(603 mm)
K" NPSM
Electronic Stepdown
Transformer in base
120 Volt only
K" NPSM
267
Step Light
Path Lighting
FEATURES
LANDSCAPE
KLV810/KLV817
EL810/EL817
EL815/EL816
KLV800/KLV807
EL800/EL805
EL806/EL807
•
Low level, unobtrusive directional lighting that is ideal for installation in
concrete, brick and masonry stairways
•
Available in 12 volt, 120 volt thru 277 volt options
•
New energy efficient 3 and 9 diode LEDs available in Universal Voltage
120 to 277V
•
The Step Light’s die-cast, low copper alloy aluminum housing and tempered
prismatic glass is designed for long life
ORDERING. INFORMATION (Example)
3L5K
FIXTURE
12 VOLT LED
KLV807 Rectangular
KLV817 Round
120/277 VOLT LED
UV
ELECTRICAL MODULE
BL
VOLTAGE
12 VOLT LED
Source
3L 3 LEDs
Color Temperature
2K 580nm
3K 3000K
4K 4200K
5K 5100K
120/277 VOLT LED
Source
EL807 Rectangular
3L 3 LEDs
EL817 Round
9L 9 LEDs
Color Temperature
2K 580nm
3K 3000K
4K 4200K
5K 5100K
120/277 VOLT LED
Voltage
UV Universal Voltage
from 120 to 277V
with a ±10%
tolerance
FIXTURE FINISH
ALUMINUM
BL Black
DB Dark Bronze
GR Verde Green
RECTANGULAR
ROUND
L"
(19 mm)
L"
(19 1 mm)
9C"
3L"
O"
(21 mm)
(95 mm)
L"
(238 mm)
5"
(127 mm)
1M"
6" DIA
(152 mm)
(19 mm) (33 mm)
2M" (58 mm)
4"
(102 mm)
3K"
(89 mm)
K" NPT
K" NPT
2D"
(67 mm)
5L"
(146 mm)
4K"
(114 mm)
7B"
(181 mm)
268
4B"
(105 mm)
D"
(16 mm)
Clemson University, Clemson, South Carolina
This is The Next Revolution in LED Outdoor Lighting.
This is Kim Lighting.
www.kimlighting.com/products/altitude