The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
NEW
Standard Connectors
MD Series
■Overview
Connectors conforming to the requirements of the High
Definition Multimedia Interface (HDMI) Standard intended for
the digital television.
The HDMI places the video and audio links into a single
connector /cable.
■Features
1.6 mm offset from the mating surface
1. Two panel mounting styles (receptacle)
¡SMT termination, through panel (no screw)
¡SMT termination, through panel, single screw panel attachment
2. Easy insertion
Mating interface is visible on the panel surface, allowing correct insertion
of the plug. (Figures (1) and (2))
3. Reliable connection
Fully mated condition between the plug and receptacle is confirmed with a
distinctive tactile “click” sensation, assuring complete mechanical and
electrical connection.
4. Small size
Despite it’s small size, solder connection of the wires to the terminations is
easily performed.
5. Strong shields
Two-piece shields surrounding the wire termination areas provide EMI
protection as well as increase the strength of the plug. (Figure (3))
1.6mm
Figure (1)
Easy insertion - connector flush with the panel
6. RoHS compliant
All components and materials comply with the requirements of EU
Directive 2002/95/EC
Panel
Panel mounting screw
Receptacle
Plug
■Applications
PDP, LCD, CRT televisions, projectors, DVD, set top boxes and other audiovisual peripheral equipment.
PCB
Mating surface
Figure (2)
Strong shields-plug
HDMI
connections
Shell – top
Assembly
(insulator/ contacts)
Figure (3)
Shell - bottom
*High Definition Multimedia Interface and HDMI are trademarks of HDMI Licensing, LLC.
2008.3
1
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS
products
have been discontinued,
or will beConnectors
discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
MD
Series●HDMI™
Standard
■Specifications
Current rating
0.5A
Voltage rating
125V AC
Operating temperature range : -55°C to +85°C
Ratings
Item
1. Contact resistance
Specification
Conditions
Signal: 60 mø max.
Shell: 30 mø max.
100mA (DC or 1,000Hz)
2. Insulation resistance
100 Mø min.
500V DC
3. Withstanding voltage
No flashover or insulation breakdown
500 V AC / 1 minute
4. Durability
5. Vibration
6. Shock
7. Temperature cycle
8. Salt spray
Contact resistance of contacts: Change of 30mø max.
Contact resistance of shell: Change of 50mø max.
10,000 cycles
Frequency: 55 to 2,000 Hz, total amplitude of 1.5 mm
Acceleration of 147 m/s2, 12 test cycles in each of the 3 directions
No electrical discontinuity of 1 µs or longer.
Contact resistance, contacts: Change of 30 mø max.
Contact resistance, shell: Change of 50 mø max.
No damage, cracks, or parts dislocation
Acceleration of 490m/s2, 11 ms continuous time, sine
half-wave, 3 test cycles in each of the 3 directions
Contact resistance, contacts: Change of 30 mø max.
Contact resistance, shell: Change of 50 mø max.
No damage, cracks, or parts dislocation
Temperature:-55ç/+15ç to 35ç/+85ç/+15ç to 35ç
Times: 30 min./ 2 min.to 3 min. / 30 min./ 2 min. to 3 min
10 cycles
No corrosion
5% salt water solution / 48 hours
■Materials / Finishes
●Receptacles
Part
Material
Finish
Remarks
Insulator
LCP
-------
UL94V-0
Contacts
Copper alloy
Contact area: Gold plating over nickel
Lead area: Gold flash plating over nickel
-------
Shell
Copper alloy
Tin plating over nickel
-------
-------
●Plugs
2
Part
Material
Finish
Remarks
Insulator
LCP
-------
UL94V-0
Contacts
Copper alloy
Contact area: Gold plating over nickel
Lead area: Gold flash plating over nickel
-------
Shell
Copper alloy
Tin plating over nickel
-------
-------
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com,
or contact
your Hirose
sales representative.
MD Series●HDMI™
Standard
Connectors
■Ordering information
●Receptacles
Receptacles
MD 60 - 19 P A
1
2
3
4
5
: MD
1 Series name
2 Board mounting style:
60
3 Number of Contacts
4 Contact type
P
:Right angle SMT
:19
: Male
5 Panel mounting style
Blank
A
●Plugs
Plugs
MD 40 - 19 S
1
:Standard
:Single panel screw
2
3
4
1 Series name
2 Termination style
40
3 Number of Contacts
4 Contact type
S
: MD
: Solder
:19
:Female
Note: Plug cable termination and overmold recommendations are available upon request.
Contact your Hirose sales representative for details.
*Information contained in this catalog may not reflect latest updates.
Request drawing for a specific part number listed.
3
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search
at www.hirose-connectors.com,
or contact
your Hirose sales represent
MD Series●HDMI™
Standard
Connectors
■Receptacles
17.6
●Receptacles – Right angle
9
P=0.5
(0.18)
No.1
1.4
1.4
No.19
17.2
No.19
243-0001-8
YES
6.15
No.18
8.1
1
Note 1: Tape and reel packaging (750 pieces/reel).
Order by number of reels.
9
2
PCB edge
8.1
1.3
3.375
0.35 ± 0.05 Solder pad
2
0.5
1.7 1.9
M
1.1
10.6
13
(3.1)
BRecommended PCB mounting pattern
4.5
6.15
8
-R
5
0.
AX
2-Ø
PCB mounting surface
(5.6)
All dimensions: mm
BRecommended Panel Cutout
15.6
3.7 2.4
No.2
0.9
MD60-19P
10.8
5.6
RoHS
3.7 2.4
CL No.
No.1
A
(3.375)
Part Number
15
13.4
18.2
Panel thickness: 1.6 mm max.
●Receptacles – Single panel screw
All dimensions: mm
17.6
9
No.19
No.1
P=0.5
1.4
1.4
(0.18)
10.8
17.2
1.6
CL No.
RoHS
MD60-19PA
243-0003-3
YES
Tray packaging
7.9
No.19
No.1
6
15
6.15
Part Number
9.8
(3.375) (6.425)
Note.1
A
No.18
Ø1
No.2
3.7 2.4
0.9
8.1
(5.6)
(3.1)
Note 1: Use M3x12mm long pan head self-taping screw.
(3.375)
13
0.35 ± 0.05 Solder pad
5.6
2
3.7 2.4
2
0.5
8.1
10.6
1.3
PCB mounting surface
8
.5
4.5
6.15
15.6
0
-R
9
AX
1.7 1.9
6
Ø3.
M
BRecommended PCB mounting pattern
1.1
2-Ø
9.8
6.425
BRecommended Panel Cutout
PCB edge
13.4
18.2
Panel thickness: 1.6 mm max.
All dimensions: mm
4
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search
at www.hirose-connectors.com,
or contact
your Hirose sales represent
MD Series●HDMI™
Standard
Connectors
■Plug
Assembly (insulator / contacts)
13.45
3.5
4.5
Shell - bottom
Assembly
(insulator/contacts)
Shell - top
13.2
No.19
Part Number
CL No.
RoHS
MD40-19S
CL243-0002-0
YES
3.8
0.8
No.1
No.2
No.18
All dimensions: mm
* Supplied separate as shown.
Shell - top
Shell- bottom
Note: Plug cable termination and overmold recommendations are available upon request.
Contact your Hirose sales representative for details.
5
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS
products
have been discontinued,
or will beConnectors
discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
MD
Series●HDMI™
Standard
■Packaging Specifications
●Embossed carrier tape dimensions
●Reel Dimensions
(2)
(32.4)
(Ø380)
32±0.3
Unreeling direction
16±0.1
Unreeling direction
Temperature(ç)
■Recommended Temperature Profile
PEAK: 250ç
230ç
250
200
150
180ç
150ç
100
50
120±30s
Preheating
20±10s
Soldering
Time(Seconds)
Note 1: Up to 2 cycles of Reflow soldering are possible under the same conditions, provided that there
is a return to normal temperature between the first and second cycle.
Note 2: The temperature profile indicates the board surface temperature at the point of contacts with the
connector terminals.
®
6
5-23,OSAKI 5-CHOME,SHINAGAWA-KU,TOKYO 141-8587,JAPAN
PHONE: 81-3-3491-9741, FAX: 81-3-3493-2933
http://www.hirose.com
http://www.hirose-connectors.com
The contents of this catalog are current as of date of publication. Contents are subject to change without notice for the purpose of improvements.