NEW Wireless Safety Edge System For Gate Guarding

advertisement
 100 Schmitt Boulevard, Farmingdale, N Y 11735 Ph: (631) 630-­‐0442 • Fax: (631) 630-­‐0454 Web: www.tapeswitch.com • Email: sales@tapeswitch.com A full spectrum of sensing and signaling products for protection, detection, and safety Tapeswitch Corporation Launches Two NEW Wireless Gate Operator and Security Safety Edge
Systems
The Tapeswitch Corporation Launches two NEW gate operator and security
wireless sensing edge systems, which combines the reliable Tapeswitch
Corporation safety sensing edge for gate guarding with the PSSW/TX and
PSSW/RX (multi-gate programmable) Wireless Control Systems, which is
suitable for both outdoor and indoor applications.
Tapeswitch Corporation manufactured has the largest selection of sensing
edges to fit your door or gate application with the most reliable product life cycle
on the market at millions of actuations at any point. The sensing edge for this
system features an 8.2K ohm end of line resistor. Combine this with a wireless
control system and you receive a commercial, industrial, residential, and
municipal system that easy to install by eliminating cable installation and easy to
operate from up to a 10m distance.
The PSSW/TX and PSSW/RX (multi-gate programmable) Control Systems offer
two wireless solutions to update your door or gate system with easy operation
from anywhere between to a 10m distance for gates that open from 2 to 40
meters. The PSSW/RX offers up to 6 transmitters per receiver for a multi-gate
monitoring system. Each transmitter can be programmed to the appropriate
receiver by simply pushing a button on the receiver PCB. The PSSW/TX is IP66
rated while the PSSW/RX is IP54 (with IP65 cable seals), suitable for both
outdoor and indoor applications. Both systems offer an operating frequency of
868.90MHz. Both safety system controllers conform to EN-13849-1:2008 Plc,
98/37/EC Machines Directive, 73/23/EEC Low Voltage Directive, 2004/108/EC
Electromagnetic Compatibility Directive, R&TTE 1999/5/EC Radio and
telecommunication terminal equipment Directive.
The systems are being offered as several full systems and system components: a complete sensing edge
system to add a wireless sensing edge system to your gate or door operations, a system to replace
existing sensing edge systems, or the as controllers to integrate into existing sensing edges that
incorporate a 8.2K ohm resistor.
Tapeswitch Corporation
Tapeswitch Corporation manufactures a complete product line pressure sensitive switches, mats, sensing
edges, and sensing bumpers for a global security marketplace. They also offer a complete line of noncontact interlocks for gate and door security. In addition to standard product lines, they custom engineer
pressure sensitive sensing solutions to meet the needs of tailored applications. Tapeswitch Corporation
manufactures world class switch products and offers interlock systems to meet the needs of
professionals, engineers, OEMs to bring safety, sensing, and signaling to global and multiple industry
marketplaces.
Download