1 -24-040 / Exp lo sio n/flame p r o o f sig nals
GNExCP6B-PB Push Button
Manual Call Point with EOL & series devices.
The GNExCP6B manual call points are available as break glass, push button or tool
reset versions. They are approved for Zone 1, 2, 21 and 22 hazardous areas for the
control of fire and gas alarm systems.
All types are available with EOL or series resistors, diode or Zener diodes or an LED indicator and also
with either single or double pole change over switches. All versions are certified to ATEX and IECEx
standards..
Options
Alternative housing colours are available to meet specific
requirements.
Single or double pole c/o switch.
DIN rail mounted terminal blocks: 8 x 2 .5mm².
Metalised polyester or stainless steel “Duty” label.
Series and/or End of Line resistors, diodes & Zener diodes
Indicator LED.
Approvals
ATEX certificate: Sira 09ATEX32 86X,
IEC 60079-0:2 007 Ed 5, EN 60079-1:2 004,
EN 60079-7:2 007, IEC 60079-18:2 009 Ed 3,
EN 612 41-1:2 004
IECEx certificate: IECEx SIR 09.012 1X,
IEC 60079-0:2 007-10 Edition: 5,
IEC 60079-1:2 003 Edition: 5,
IEC 60079-18:2 009 Edition: 3,
IEC 60079-7:2 006-07 Edition: 4,
IEC 612 41-1:2 004 Edition: 1
Specification
Part Codes
Versi on:
Product type:
Part c ode:
G NExCP6B-PB B type - choice of end of line devices
Switch Type: [s]
S
D
SPCO
DPCO
Stopping plug
material: [m]
N
B
P
S
Nylon
Brass
Nickel Plated
Stainless Steel
Terminals: [t]
S
D
Standard 6 x 4mm²
DIN Rail 8 x 2 .5mm²
Duty label [d]:
N
P
S
No duty label
Metalised Polyester
Stainless Steel
Enclosure
colour: [x]
RD, BL, G N, YW Red, Blue, G reen, Yellow
RW, YB, BK
Red/White, Yellow/Black, Black
Voltage: [v]
48, 2 4
12 , 06
48V, 2 4V, 12 V, 6V
System voltage
E.O .L.Module:
[Exxx]
ExxxR
ED1
ExxxZ
Resistor value in O hms e.g. E470R = 470 O hm
Diode IN4007 = ED1
Zener diode e.g. E5V1Z = 5.1V
Series Module:
The G NExCP6B call point can contain a maximum of two resistor or
[Sxxx]
diode E.O .L. or series modules. The LED indicator can be combined with
an EO L resistor or diode.
SxxxR
SD1
SxxxZ
LED
Resistor value in O hms e.g. S1K5R = 1.5K O hm
Diode IN4007 = SD1
Zener diode e.g. S5V1Z = 5.1V
LED = LED indicator
G NExCP6B:
II 2 G Ex e d mb IIC T4 G b
II 2 D Ex t IIIC T80°C Db
IP66
Ambient:
Ta = -40°C to +50°C [-40° to +131°F]
Ingress protection: IP66
Housing material: G RP - glass reinforced polyester
(UV stable)
Colour:
RAL3000 Red (others available on request)
Cable entries:
2 x M2 0 clearance top and
1 x M2 0 clearance side.
Back box can be rotated to give
2 x bottom and 1 x side entries.
Stopping plugs:
2 x Ex e nylon plugs as standard
Brass and stainless steel plugs optional
Terminals:
6 x 4.0mm² / 8 x 2 .5mm²
Weight:
1.3Kg/2 .86Ibs
N ote:
For applications that do not require monitoring
resistors, diodes or inidcator LED’s please see
the G NExCP6A-PB version.
Data sheet reference: 1.3.05.
Part Code Struc ture
Example:
G NExCP6B-PB[s][m][t][d][x][v][Exxx][Sxxx]
G NExCP6B-PB-S-N-S-N-RD-2 4-E470R-S10KR
Versions
Resi stors:
Max./
Nominal
Voltage:
Zener Di odes:
Di odes:
Min.
Max.
Zener Max. Max
Max.
Max.
Resistor Current
Voltage: Input Current: Voltage: Current:
Value: (if resistor
Volt.:
is EO L only):
56V / 48V
2 8V / 2 4V
15V / 12 V
9V / 6V
1K8
470R
12 0R
47R
0.75A
1.00A
1.00A
1.00A
3.3V
4.7V
5.1V
5.6V
6.2 V
6.8V
10V
12 V
56V dc 2 30mA <56V dc 0.75A
56V dc 162 mA <50V dc 1.00A
56V dc 149mA
56V dc 136mA
56V dc 12 2 mA
56V dc 112 mA
56V dc 76mA
56V dc 63mA
If resistor is used in Series the Max. Current is not applicable.
E2S Warning Signals sales@e2s.com www.e2s.com
2 Sep 2015
N o liability is accepted for any consequence of the use of this d ocument. The technical specification of this unit is subject to chang e without notice d ue to our policy of continual prod uct d evelopment. All d imensions are approximate. This unit is sold subject to our stand ard
cond itions of sale, a copy of which is available on request.