LEVITON UPB™ WALL SWITCH AND AUXILIARY SWITCH
Cat.No.35A00-1
Installation Instructions and User’s Guide
PK-93406-10-00-5AAR2243
(35I00-1)
INSTALLATION AND OPERATING INSTRUCTIONS
WARNINGS AND CAUTIONS
•
•
•
•
WARNINGS AND CAUTIONS
TO AVOID FIRE, SHOCK, OR DEATH; TURN OFF POWERatcircuitbreakerorfuseandtestthatpowerisoffbeforewiring!
Tobeinstalledand/orusedinaccordancewithappropriateelectricalcodesandregulations.
Ifyouareunsureaboutanypartoftheseinstructions,consultanelectrician.
SAVETHESEINSTRUCTIONS.
For the following Models:
35A00-1Leviton600WDimmerSwitch,35A00-1CFL600WCFL/LEDDimmer,35A00-3Leviton600WNon-Dimming
Switch(collectivelyreferredtoasLevitonUPB™WallSwitch,inthisdocument),and37A00-1LevitonAuxiliarySwitch
NOTE:AllLevitonUPB™WallSwitchesrequireaneutral(white)connectionwire.
ENGLISH
• Toreducetheriskofoverheatingandpossibledamagetootherequipment,whenconfiguredasdimming-capable,DONOT
installtocontrolareceptacle,amotor-operatedappliance,oratransformer-suppliedappliance.
• Usethisdevicewithcopper or copper-clad wire only.
• Forindooruseonly.
Changing Switch Color
Installation Procedure
ThecoloroftheLevitonUPB™WallSwitchandAuxiliarySwitchmaybechangedtocomplementtheinteriordécor.The
LevitonUPB™WallSwitchandAuxiliarySwitchissuppliedwithawhiteswitchplate.Additionalcolorsareavailable;
contactyourLevitondistributorformoreinformation.Whenchangingtheswitchplate,makesurethattheswitchis
disconnectedfromallpower,andproceedasfollows:
1. Besurethatallpowertotheloadhasbeendisconnectedbyturningoffthecircuitbreaker.
Figure 3 – Changing Switch Color
Leviton UPB™ Wall Switch Overview
TheLevitonUPB™WallSwitch(Figure 1)allowsforlocalcontroloflightingbyusingtherockerswitch.Italso
incorporatestheUPB™two-waypowerlinecommunicationtechnologythatgivesittheabilitytoberemotelycontrolledby
UPB™compatiblecontrollers.TheLevitonUPB™WallSwitchisalsocapableoftransmittingUPB™messages(including
currentlightlevel)whentherockerswitchisturnedon,turnedoff,brightened,ordimmed.
2. Ifapplicable,removethefaceplatefromtheexistingwallswitch,removetheexistingwallswitchfromthewallbox,and
disconnectthewiresfromtheexistingwallswitch.Identifythe"Line","Neutral","Load"and"Traveler"(ifapplicable)wires.
3. Besurethattheair-gapswitchleverontheLevitonUPB™WallSwitchisfullyopen.
4. Remove3/4"ofinsulationfromeachofthewiresontheLevitonUPB™WallSwitch.InstalltheLevitonUPB™Wall
SwitchbyconnectingwiresperwiringconfigurationshowninFigure 5.
5. InstallanyoptionalLevitonAuxiliarySwitchperwiringconfigurationshowninFigure 5.
6. Afterallconnectionshavebeenmade,becertainthatallwireconnectorsarefirmlyattachedandthereisnoexposed
copper.
Eachswitchcanbeconfiguredtocustomfitanindividual’slifestyleanddesires.TheLevitonDimmerSwitchiscapableof
storingupto16presetlightlevelsandfaderatestocreatepowerfullightingscenes.TheLevitonNon-DimmingSwitchis
usedtocontrolsuchloadsasfluorescentlightsandceilingfans.
7. GentlyplacethewiresandLevitonUPB™WallSwitchintothewallboxwiththeLEDatthetopofdevice.Usingthe
suppliedscrews,attachtheLevitonUPB™WallSwitchtothewallbox.
8. Beforeinstallingthefaceplate,restorepowertothecircuit,andthenfullyclosetheair-gapswitchlever.
9. AftertestingtheLevitonUPB™WallSwitchandAuxiliarySwitchforproperlocaloperation(see Table 2 and Table 3),
installaDecora®faceplateovereachswitch.
Figure 1 - Leviton UPB™ Wall Switch
Leviton UPB™ Wall Switch De-Rating
Intwo-ganginstallations,thereisnoneedtode-ratethe35A00-1,35A00-1CFL,or35A00-3.Inthree-ganginstallations,
eachswitchmustbede-ratedfrom600Wto500W.
LED
INDICATOR
Table 1 – Leviton Wall Switch De-Rating
BLACK
TOP
(ON/BRIGHT)
LINE
WHITE
NEUTRAL
RED
LOAD
YELLOW
BOTTOM
(OFF/DIM)
CONTROL
TheswitchplateattachestotheLevitonUPB™WallSwitchandAuxiliarySwitchwithtwolatchesontherightandtwoon
theleft.Usingasmall-bladedscrewdriver,gentlydepresstheupperandlowerlatchononesidewhileliftinguponthe
plate.Oncethelatchesarereleasedononeside,removetheswitchplatefromtheotherside.
Model
Device Maximum Load
Next to One Dimmer
Next to Two Dimmers
35A00-1
600W
600W
500W
35A00-1CFL
600W
600W
500W
35A00-3
600W
600W
500W
1. Alignthelatchesofthenewswitchplatetotheopeningsonthemountingplateandgentlysnapintoplace.
GREEN
GROUND
INSTALLATION INSTRUCTIONS
Leviton DIMMER SWITCH OPERATION
TheLevitonUPB™WallSwitchiswireddirectlytothelightingcircuitandcanbecontrolledbyaddingoneormoreoptional
LevitonAuxiliarySwitchesproducingmulti-waycircuits.Multi-waycircuitsmakeitpossibleforagroupofswitchesto
controlthesamelightorsetoflights.Thissectionwillillustratehowtomaketheconnections.
TheLevitonDimmerSwitchhasmanyconfigurableitemsthatcanbesetusingtheUPB™UPStartconfigurationsoftware.
ThefollowingdescribestheoperationoftheLevitonDimmerSwitchinitsfactorydefaultconfiguration.
NOTES:
TheLevitonDimmerSwitchhasarockerswitchthatcanbeusedtocontrolthelightingloadasfollows.
Local Rocker Switch Operation
1. RefertoFigures 1 and 2todeterminethewirecolorsforeachconnection.
Table 2 - Leviton UPB™ Dimmer Switch Local Operation
2. AllLevitonUPB™WallSwitchesrequireaneutral(white)connection.
Leviton Auxiliary Switch Overview
The37A00-1LevitonAuxiliarySwitch(Figure2)isanoptionalcompaniondeviceusedwiththeLevitonUPB™Wall
Switchformulti-waycircuits.TheLevitonAuxiliarySwitchhasarockerswitchthatcontrolsthelightingloadintheexact
samemannerastherockerswitchontheLevitonUPB™WallSwitch.
Figure 2 – Leviton Auxiliary Switch
LED
INDICATOR
TOP
(ON/BRIGHT)
Air-Gap Switch Lever
TheLevitonUPB™WallSwitchhasanair-gapswitchleverthatwillremoveallpowerfromtheloadforsafeswitch
installationandlightbulbreplacement.Toactivatetheair-gapswitch,usingyourfingernail,pryopentheleveratthe
groove
(Figure 1).Swingtheleverfullyopensothatitisperpendiculartothebottomrim(Figure 4).Afterservicing,pushthe
leverfullyclosedsothatitisparalleltothebottomrim.Thelevermustbepushedfullyclosedfornormaloperation.
Figure 4 – Air-Gap Switch Lever
BLACK
GRAY
BLUE
BOTTOM
(OFF/DIM)
3. TheLine(black)wiremustbeaccessiblefortheinstallationofallLevitonAuxiliarySwitches.Thiswiremaybe
connectedtoeitherphaseofthe120/240Vsupply.Theblueand/orgraywireontheLevitonAuxiliarySwitchcanbe
connectedtoeitherearthgroundorneutral.Theblueand/orgraywireisonlyusedtolighttheLEDontheswitch.This
LEDonlyindicatesthatpowerisappliedandservesasanight-light.ConnectthebluewireonlytolighttheLEDblue.
ConnectthegraywireonlytolighttheLEDred.ConnectboththebluewireandthegraywiretolighttheLEDmagenta.
YELLOW
Rocker Event
Top Rocker
Bottom Rocker
Single-Tap
Brightensthelightto100%(on)at
defaultfaderateandrestartsauto
shut-offtimer(ifapplicable).
Fadethelightto0%(off)atdefault
faderate.
Double-Tap
Snapsthelightto100%(on)and
overridesautoshut-off.
Snapsthelightto0%(off).
Hold
Startsfading(brightening)thelight
towards100%atdefaultfaderate
andrestartsautoshut-offtimer(if
applicable).
Startsfading(dimming)thelight
towards0%atdefaultfaderate.
Release
Stopsbrighteningthelightand
restartsautoshut-offtimer(if
applicable).
Stopsdimmingthelight.
LINE
*NEUTRAL
(FOR RED INDICATOR)
*NEUTRAL
(FOR BLUE INDICATOR)
CONTROL
Leviton NON-DIMMING SWITCH OPERATION
WEB VERSION
AIR-GAP SWITCH
LEVER GROOVE
TheLevitonNon-DimmingSwitchhasmanyconfigurableitemsthatcanbesetusingtheUPB™UPStartconfiguration
software.ThefollowingdescribestheoperationoftheLevitonNon-DimmingSwitchinitsfactorydefaultconfiguration.
Local Rocker Switch Operation
TheLevitonNon-DimmingSwitchhasarockerswitchthatcanbeusedtocontroltheloadasfollows.
Table 3 – Leviton Non-Dimming Switch Local Operation
RockerEvent
TopRocker
BottomRocker
Single-Tap
Turnstheloadonandstartsauto
shut-offtimer(ifapplicable).
Turnstheloadoff.
SPECIFICATIONS
TheLevitonUPB™WallSwitchcomesequippedwithamulti-colorLEDindicatorthatisnormallylittobluewhentheload
isoff.TheLEDwillturnoffwhentheloadisturnedonorsettoanylevelabove0%.TheLEDwillflashmagentawhilethe
autoshut-offtimerisrunning(iftheconfiguredLEDoptionisalwaysoff,theLEDwillremainoffduringthetimeoutperiod).
RefertothefollowingTableforspecificmanufacturesandmodelnumbersofdimmableCFLandLEDbulbsapprovedfor
usewiththesedimmers:
35A00-1
35A00-1CFL
35A00-3
Ifused,theLEDintheLevitonAuxiliarySwitchisalwayslit.
IncandescentLoads
Dimming
Yes
Yes
Yes(configurable)
Leviton AUXILIARY SWITCH OPERATION
InductiveLoadsDimming
Yes
Yes
Yes(configurable)
Yes(configurable)
Yes(configurable)
Yes
TheLevitonUPB™WallSwitchcanbeconnectedtooneormoreLevitonAuxiliarySwitchesproducingmulti-waylighting
circuits.EachLevitonAuxiliarySwitchhasarockerswitchthatcontrolsthelightingloadintheexactsamemannerasthe
rockerswitchontheconnectedLevitonUPB™WallSwitch,aspreviouslydescribed.Whenconnected,theLEDremains
continuallyonatalltimeswhilepowerisapplied.
Setup Mode
ToconfiguretheLevitonUPB™WallSwitchusinganLevitoncontrolleroraPCrunningtheUPB™UPStartconfiguration
software,itmustbeputintoSetupModeasfollows:
Table 4 – Leviton Wall Switch Setup
Model Number
FlorescentLoadsNonDimming
PowerMaximumDimming
Operation
1
Taptherockerswitchquickly5times
TheLevitonUPB™WallSwitchwillflashthelightingloadonetimeandblinkitsLEDbluetoindicatethatitis
inSetupMode.Note:theswitchwillautomaticallyexitSetupmodeafter5minutes.
1
OntheLevitonUPB™WallSwitchthatyouwanttoresettofactorydefault,taptherockerswitchquickly5
times.
2
TheLevitonUPB™WallSwitchwillflashthelightingloadonetimeandblinkitsLEDbluetoindicatethatitis
readytobereset.
3
Taptherockerswitchquickly10timestoresettofactorydefaultsetting.
4
TheLevitonUPB™WallSwitchwillflashthelightingloadonetimeandblinkitsLEDredtoindicatethatithas
beenreset.
5
TaptherockerswitchoncemoretostoptheLEDfromblinking.
YELLOW
Line 120VAC, 60Hz
*BLUE AND/OR GRAY
CFL
EcoSmart
ES5R315DIM35K
15
CFL
EcoSmart
ES5R315DIM50K
15
CFL
Feit
BPESL15T/DM
15
23
5A
CFL
GE/EnergySmart
FLE15/2/DV/R30
15
CFL
GE/EnergySmart
FLE15HT3/2/DV/SW
15
CFL
GE/EnergySmart
FLE26/2/DV/R40
26
CFL
GE/EnergySmart
FLE26HT3/2/DV
26
18GA
LEDIndicator
Yes
Yes
Yes
CFL
Litetronics
16AE5L092725
27
4.1x1.75x1.45
4.1x1.75x1.45
4.1x1.75x1.45
CFL
Litetronics
18185K085141
5
CFL
Litetronics
18185K088141
8
CFL
Litetronics
18505A10111
11
15
InputPower
0.25lb.
0.25lb.
0.25lb.
StandardJBox
StandardJBox
StandardJBox
CFL
Litetronics
18BR5E09152
120±12VAC
120±12VAC
120±12VAC
CFL
Litetronics/EarthMate
E05129LW
5
60±3Hz
60±3Hz
60±3Hz
CFL
Litetronics/EarthMate
E2752AJLW
27
CFL
Neptun
61920-ADIM
20
-40°Fto104°F
-40°Fto104°F
-40°Fto104°F
CFL
Neptun/EarthTronics
CF24SW1BDIM
24
CFL
Phillips
EL/APAR38
20
CFL
Phillips
EL/AR30DIM
16
CFL
Phillips
EL/AR40DIM
20
CFL
Sylvania
CF5EL/A15/827/DIM/BL
5
CFL
Sylvania
CF5EL/B10/827/C/ADP/DIM/BL
5
CFL
Sylvania
CF14EL/R20/DIM
14
CFL
Sylvania
CF14EL/TWIST/DIM
14
CFL
Sylvania
CF19EL/BR40/DIM
19
CFL
Sylvania
CF24EL/TWIST/827/DIM/RP
24
CFL
TCP
2R2014DIM
14
CFL
TCP
40123
23
CFL
TCP
4R3016TD
16
CFL
TCP
CCA05
5
CFL
ULA
SDR23W2P-R30DIM
23
LED
CooperLighting-HALO
ML706830
14
LED
Cree
CR6-0210E
12
LED
Cree
CR6-0323E
12
LED
EcoSmart
ECO-GU24-575L-YOW
12
LED
EcoSmart
G2510003-005
8
LED
EcoSmart
R2010010-013
8
LED
LemnisLighting
Pharox300
6
LED
Phillips
12E26A60
12.5
LED
Phillips
3E12B11-E
3
LED
Phillips
6E26R20
6
LED
Phillips
7E26PAR20-E
7
LED
Phillips
8E26A60
8
LED
Sylvania
LED8PAR20/DIM/827/FL36
8
LED
Sylvania
LED8PAR20/DIM/827/NFL25
8
LED
Sylvania
LED8PAR20/DIM/830/NFL25/HVP
8
LED
Sylvania
LED10PAR30/DIM/SG830/WSP15
10
LED
Sylvania
LED11PAR30/DIM/SG/830/SP10
11
LED
TCP
LDA153WH30K
LED
Toshiba
218-50053
LED
Utilitech
0171150
2
LED
Utilitech
0338802
7.5
LED
Utilitech
0352280
3.5
NOTE:Itisnormalforthisswitchtomakeaslightbuzzingsoundduringoperation.Itisalsonormalfortheswitchandwall
platetofeelwarmtothetouch.
ThisequipmenthasbeentestedandfoundtocomplywiththelimitsforaClassBdigitaldevice,pursuanttopart15of
theFCCRules.Theselimitsaredesignedtoprovidereasonableprotectionagainstharmfulinterferenceinaresidential
installation.Thisequipmentgenerates,usesandcanradiateradiofrequencyenergyand,ifnotinstalledandusedin
accordancewiththeinstructions,maycauseharmfulinterferencetoradiocommunications.However,thereisnoguarantee
thatinterferencewillnotoccurinaparticularinstallation.Ifthisequipmentdoescauseharmfulinterferencetoradioor
televisionreception,whichcanbedeterminedbyturningtheequipmentoffandon,theuserisencouragedtotrytocorrect
theinterferencebyoneormoreofthefollowingmeasures:
• Reorientorrelocatethereceivingantenna.
• Increasetheseparationbetweentheequipmentandreceiver.
• Connecttheequipmentintoanoutletonacircuitdifferentfromthattowhichthereceiverisconnected.
• Consultthedealeroranexperiencedradio/TVtechnicianforhelp.
YELLOW
WHITE
*BLUE AND/OR GRAY
23
5A
BLACK
YELLOW
ES5M10123
5A
35A00
HAI Wall Switch
BLACK
EcoSmart
18GA
37A00 (OPTIONAL)
AUXILIARY SWITCH
BLACK
5
CFL
15
BPESL23T/DIM
LINE
37A00 (OPTIONAL)
AUXILIARY SWITCH
ES5CCDF052
Feit
FCC Compliance
Operation
EcoSmart
CFL
ToresettheLevitonUPB™WallSwitchtofactorydefaultsettings:
Step
CFL
18GA
OperatingTemperature
Reset to Factory Default Settings
LampWattage(W)
600W/600VA
InputFrequency
Setupmodeandblinkmodetakeprecedenceoverautoshut-off.Iftheautoshut-offtimerisrunning,andtheneithersetup
modeorblinkmodeoccurs,theautoshut-offtimerwillberesetanddisableduntilsetuporblinkmodeexpire.
2R3015DIM
Connections
Mounting
NOTE:
LampModel
EcoSmart
600W/600VA
Weight
2
LampManufacturer
CFL
600W/600VA
CurrentMaximumNonDimming
Dimensions
Step
CFL/LED
RED
3
7.8
CFL = CompactFluorescentLamp
LED = SelfBallasted,Light-EmittingDiode
GREEN
NEUTRAL
FOR CANADA ONLY
WEB VERSION
LED Indicator
Forwarrantyinformationand/orproductreturns,residentsofCanadashouldcontactLevitoninwritingatLeviton
Manufacturing of Canada Ltd to the attention of the Quality Assurance Department, 165 Hymus Blvd, PointeClaire (Quebec), Canada H9R 1E9orbytelephoneat1 800 405-5320.
*CONNECTING THE BLUE AND/OR GRAY WIRE TO NEUTRAL SETS THE COLOR OF THE LED INDICATOR.
CONNECT BLUE FOR BLUE INDICATOR, GRAY FOR RED INDICATOR, OR BOTH FOR MAGENTA INDICATOR.
BLUE AND/OR GRAY WIRE MAY BE CONNECTED TO NEUTRAL OR EARTH GROUND. NEUTRAL IS RECOMMENDED.
Usehereinofthirdpartytrademarks,servicemarks,tradenames,brandnamesand/orproductnamesarefor
informationalpurposesonly,are/maybethetrademarksoftheirrespectiveowners;suchuseisnotmeanttoimply
affiliation,sponsorship,orendorsement.
LEVITON LIMITED WARRANTY
Leviton warrants to the original consumer purchaser and not for the benefit of anyone else that products manufactured by Leviton under the Leviton brand name (“Product”) will be free from defects in material and workmanship for the time periods indicated below, whichever is shorter: • OmniPro II and Lumina Pro: three (3) years from installation or 42 months from manufacture date.
• OmniLT, Omni IIe, and Lumina: two (2) years from installation or 30 months from manufacture date. • Thermostats, Accessories: two (2) years from installation or 30 months from manufacture date. • Batteries: Rechargeable batteries in products are warranted for ninety (90) days from date of purchase. Note: Primary (non-rechargeable) batteries shipped in products are not warranted.
Products with Windows® Operating Systems:Duringthewarrantyperiod,Levitonwillrestorecorruptedoperatingsystemstofactorydefaultatnocharge,providedthattheproducthasbeenusedasoriginallyintended.Installationofnon-Levitonsoftwareormodificationoftheoperatingsystemvoidsthiswarranty.Leviton’sobligationunderthisLimitedWarrantyislimitedtotherepairorreplacement,atLeviton’soption,ofProductthatfailsduetodefectinmaterial
orworkmanship.LevitonreservestherighttoreplaceproductunderthisLimitedWarrantywithneworremanufacturedproduct.Leviton will not be responsible for labor costs of removal or reinstallation of Product.TherepairedorreplacedproductisthenwarrantedunderthetermsofthisLimitedWarrantyfortheremainderoftheLimitedWarrantytimeperiodorninety(90)days,whicheverislonger.ThisLimitedWarrantydoesnotcoverPC-basedsoftware
products.Leviton is not responsible for conditions or applications beyond Leviton’s control.Leviton is not responsible for issues related to improper installation,including failure to follow written Installation and operation instructions,normal wear and tear,catastrophe,fault or negligence of the user or other problems external to the Product.Toviewcompletewarrantyandinstructionsforreturningproduct,pleasevisitusatwww.leviton.com.
© 2013 Leviton Mfg. Co., Inc.
For Technical Assistance Call: 800-824-3005 - www.leviton.com
PK-93406-10-00-5AAR2243
(35I00-1)