Rexnord TableTop and MatTop Chains ® ® ® 5997 & 4707 MatTop Chain ® Rexnord® DTS®-C System is a self clearing 90° transfer for warmers, coolers, pasteurizers, and accumulation tables utilizing Rexnord 5997 or 4707 and 7705-DTS MatTop® Chains. This system combines the benefits of a comb transfer with the self clearing capabilities of a DTS (DynamicTransfer System™) chain. Compared to other systems, its unique feature is the continuous product flow to and from a raised rib chain. With improved stiffness compared to most finger transfer plates, the 7705 DTS chain is fully supported so product tipping is minimized. The discharge and DTS chains are supported by the same wearstrip making transfers smooth and problem free. The result is a system that can be incorporated into new equipment as well as existing warmers, coolers, and accumulation tables. DTS-C is another solution to keep your line running smooth throughout the many product change overs prevalent in today’s food and beverage market. B E V E R A G E I N D U S T R Y Features & Benefits • Combines the smooth product transfer of a comb with the self clearing action of a DTS® chain • For use with 4707 or 5997 chains in conjunction with 7705DTS-450 as the takeaway chain 7705DTS®-450 • Allows for continuous product flow to and from the raised rib Rexnord® MatTop® chain 5997 or 4707 Wearstrip • DTS®-C modules mount to standard 1/4” plate for ease of setup and adjustment DTS®-C Module • The 7705DTS-450 chain is fully supported across its width to minimize product tipping Plate Height 1.83 in (46.5 mm) Plate Length 9.01 in (228.9 mm) • Discharge chains are supported by the same wearstrip as the takeaway chains for smooth product transfer • Can retrofit an existing system utilizing Rexnord 4707 or 5997 MatTop chains • Design manual available to assist in incorporating DTS-C into both new and existing systems (8rxDTS-Cdm-en) Slot Width 1.69 in (42.9 mm) Plate Width 5.96 in (151.4 mm) • Works with all 4707 or 5997 sprockets • Comb teeth extend below the surface to help combs move from side to side as temperatures change Center to Center of Slots 3.00 in (76.2 mm) Mounting Plate Thickness 0.25 in (6.4 mm) Wearstrip 114-4160-1 DTS®-C Transfer Plate 114-4151-1 Steel Mounting Plate Wearstrip Dimensions 0.20 in (5.1 mm) 0.18 in (4.6 mm) 2.25 in (57.2 mm) (Not Supplied By Rexnord) Cap Screws 114-870-1 (¼-20 Thread) • UHMWPE wearstrip available in 10 foot sections to cover gaps between modules resulting in smooth transfers TableTop, MatTop, DTS, DTS-C, and Rexnord are registered trademarks, and DynamicTransfer System is a trademark of Rexnord Industries, LLC. All rights reserved. WORLDWIDE CUSTOMER SERVICE AUSTRALIA Rexnord Australia Pty. Ltd. Picton, New South Wales Phone: 61-2-4677-3811 Fax: 61-2-4677-3812 CHINA Rexnord China Shanghai, China Phone: 86-21-62701942 Fax: 86-21-62701943 BRAZIL Rexnord Correntes Ltda. Sao Leopoldo - RS Phone: 55-51-579-8022 Fax: 55-51-579-8029 EUROPE Rexnord NV/SA Mechelen, Belgium Phone: 32-15-.443811 Fax: 32-15-443860 CANADA Rexnord Canada Ltd. Scarborough, Ontario Phone: 1-416-297-6868 Fax: 1-416-297-6873 Rexnord Kette GmbH Betzdorf, Germany Phone: 49-2741-2840 Fax: 49-2741-284-385 LATIN AMERICA Rexnord International, Inc. Milwaukee, Wisconsin Phone: 1-414-643-2366 Fax: 1-414-643-3222 E-mail: international2@rexnord.com MEXICO Rexnord S.A. de C.V. Queretaro, Qro. Phone: 52-442-218.5000 Fax: 52-.442-218-1090 SINGAPORE Rexnord International, Inc. Singapore City, Singapore Phone: 65-6338-5622 UNITED STATES Customer Service Phone: 1-866-REXNORD (1-866-739-6673) Fax: 1-614-675-1898 E-mail: rexnordcs(state)@rexnord.com Example: rexnordcsohio@rexnord.com ALL COUNTRIES NOT LISTED Rexnord International, Inc. Milwaukee, Wisconsin Phone: 1-414-643-2366 Fax: 1-414-643-3222 E-mail: international1@rexnord.com Fax: 65-6338-5422 Rexnord FlatTop North America 1272 Dakota Drive Grafton, WI www.rexnord.com © 2006 Rexnord Industries, LLC. 8rxDTS-Css(bv) 4/06