ALUMINA 6
FORUM
The ALUMINA series by FORUM
is a line of extruded aluminum
rectilinear luminaires.
JOB
TYPE
ALUMINA PRODUCT
6 is a 6” wide housing
with a 5 1/2” aperture. Multiple
DESCRIPTION
mounting configurations are
available including various
suspended types
well as wall
Arialasfont
mounted.
PRODUCT IMAGE
Size 9 or larger
DIRECT
INDIRECT
ORDERING CODE
Indirect
ALUMINA 6 can be lamped with T5
DIRECT/
INDIRECT
Direct
and T8 lamps as well as LED.
Indirect
Direct
Distribution Housing
Height
SAD = Direct
Lamping
Shielding
1T5 = 1T5
SAU = Indirect
36 = 3-3/4”
1T5S = 1T5 STAG
SAUD = Direct /
46 = 4-3/4”
1T5H = 1T5 HO
Indirect
66 = 6-3/4”
SAT = Satin lens
H = Stem Mount ***
WOL = White Opal lens C = Cable Mount ***
CAL = Clear Acrylic Lens CM = Ceiling Mount
PB = Parabolic Baffle
WB = Wall Bracket
SPB = Specular
Mount
Parabolic Baffle
CWM = Cantilevered
WPB = White Parabolic
Wall Mount ***
Baffle
WP = White Opal over
Parabolic Baffle
SAP = Satin Lens over
Parabolic Baffle
WACB = White Aluminum
Cross Baffle
OU = Open Up
1T5HS = 1T5 HO
STAG
2T5 = 2T5
2T5S = 2T5 STAG
2T5H = 2T5 HO
2T5HS = 2T5 HO
STAG
1T8 = 1T8
1T8S = 1T8 STAG
2T8 = 2T8
2T8S = 2T8 STAG
TECHNICAL DRAWINGS
LISTING: All fixtures bare an AFL-CIO/IBEW union
label and are UL listed for dry location. For alternative
location configurations, please consult factory.
Mounting
Length Voltage
Finish
Option 1 Option 2 Option 3
2 = 2’
120V
3 = 3’
277V
WH = White
S = Silver
BRZ = Bronze
BLK = Black
CC = Custom
EC = Emergency Circuit
EM1 = 550 Lumen battery pk
EM2 = 1100 Lumen battery pk
DIM = Dimming **
F = Fusing
SW = Separate Switch
FE = Flat End
ME = Machined End
SF = Seem Free End
MR = 37W MR16 Module ****
4 = 4’
5 = 5’
UNIVERSAL
6 = 6’
Color *
7 = 7’
8 = 8’
XX = Specify
run length
in even
foot
increments
* Please provide
custom color RAL # ___________________________
** Please specify dimming
manufacturer/model (if required) _________________
*** Please specify
cable / stem / cantilevered length_________________
**** Number of units 6” on center
(Beginning of fixture)/(End of fixture)
SPECIFICATION
SAUD-46
SAUD-66
BALLAST:
Electronic, high power factor, low
THD, ballast used. 120V, 277V, and Universal Voltage
available standard. Please consult factory for special
ballast requirements.
3
44"
SHIELDING:
Satin frosted and white opal lenses
are snap in. Parabolic baffles are made from high
quality aluminum and come in a variety of finishes.
MOUNTING: Alumina fixture can be mounted
in various orientations including wall mount, cable
mount, stem mount, and surface mount. Please see
supplimental documentation for mounting details.
HOUSING: 6063-T5 extruded alloy profiles join
to create various Alumina housing. Built in individual
pieces up to 16 ft in length. Sections can be joined to
form continuous runs.
3
6 4"
1
52"
6"
SAD-36
1
52"
GEARTRAY / REFLECTOR:
Integrated
geartray and reflector made from 20 GA cold rolled
steel in a pre-paint white finish. Fully wired unit remains
completely accessible from below via ballast panel.
3
3 4"
END FITTING: Applied end fitting options give the
designer vast flexibility in the final appearance of the
luminous system. Standard, a flat end of .090” aluminum
minimum is applied with concealed fasteners.
1
52"
6"
* Dimensions provided as general information.
Please see shop drawings for specific rough in
dimensions.
* Forum reserves the right to update this
information at any time.
6"
Forum, Inc. - 908 Old Freeport Rd. - Pittsburgh, Pennsylvania 15238 - T: (412) 781-5970 F: (412) 781-5971 - www.forumlighting.com