PAPERS IN SCIENTIFIC JOURNALS R. Enríquez, MJ Jiménez, MR

advertisement
PAPERS IN SCIENTIFIC JOURNALS
R. Enríquez, M.J. Jiménez, M.R. Heras. Solar forecasting requirements for buildings MPC. 2016. Energy Procedia.
91C, pp. 1024-1032. DOI: 10.1016/j.egypro.2016.06.271
S. Soutullo, M.N. Sánchez, R. Enríquez, R. Olmedo, M.J. Jiménez, M.R. Heras. 2016. Comparative thermal study
between conventional and bioclimatic office buildings. Building and Environment. 105, pp. 95-103. DOI:
10.1016/j.buildenv.2016.05.017
M.J. Jiménez, J.J. Bloem. 2015. “Energy performance assessment of buildings and building components. Guidelines for
data analysis from dynamic experimental campaigns part 1: physical aspects”. Energy Procedia. 78, pp. 33063311. DOI: 10.1016/j.egypro.2015.11.741
S. Roels, P. Bacher, G. Bauwens, H. Madsen, M.J. Jiménez. 2015. “Characterising the actual thermal performance of
buildings: current results of common exercises performed in the framework of the IEA EBC Annex 58-project”.
Energy Procedia. 78, pp. 3282-3287. DOI: 10.1016/j.egypro.2015.11.726
K. Chávez, L. de la Torre, S. Castaño, R. Enríquez, M.J. Jiménez. 2015. “Experimental energy performance assessment
of a simplified building: study of robustness of different analysis approaches under different test conditions”.
Energy Procedia. 78, pp. 2328-2333. DOI: 10.1016/j.egypro.2015.11.390
S. Soutullo, R. Enríquez, M.J. Jiménez, M.R. Heras. 2014. “Thermal comfort evaluation in a mechanically ventilated
office building located in a continental climate”. 2014. Energy and Buildings. 81, pp. 424-429. DOI:
10.1016/j.enbuild.2014.06.049
L. Castillo, R. Enríquez, M.J. Jiménez, M.R. Heras. 2014. “Dynamic integrated method based on regression and
averages, applied to estimate the thermal parameters of a room in an occupied office building in Madrid”.
Energy and Buildings. 81, pp. 337-362. DOI: 10.1016/j.enbuild.2014.06.039
Philip Delff Andersen, María José Jiménez, Henrik Madsen, Carsten Rode. 2014. “Characterization of heat dynamics of
an arctic low-energy house with floor heating”. Building Simulation. 7, pp. 595–614. DOI: 10.1007/s12273014-0185-4
E. Giancola, S. Soutullo, R. Olmedo, M.R. Heras. 2014. “Evaluating rehabilitation of the social housing envelope:
experimental assessment of thermal indoor improvements during actual operating conditions in dry hot climate,
a case study”. Energy and buildings. 75, pp. 264–271. DOI: 10.1016/j.enbuild.2014.02.010
I. Naveros, P. Bacher, D.P. Ruiz, M.J. Jimenez, H. Madsen 2014. “Setting up and validating a complex model for a
simple homogeneous wall”. Energy and buildings. 70, pp. 303-317. DOI: 10.1016/j.enbuild.2013.11.076
M.N. Sánchez, C. Sanjuan, M.J. Suárez, M.R. Heras. 2013. “Experimental assessment of the performance of open joint
ventilated façades with buoyancy-driven airflow”. Solar Energy. 91, pp. 131-144. DOI:
10.1016/j.solener.2013.01.019
J. Arce, J. Xamán, G. Alvarez, M.J. Jiménez, R. Enríquez, M.R. Heras. 2013. "A simulation of the thermal performance
of a small solar chimney already installed in a building”. Journal of Solar Energy Engineering, Transactions of
the ASME. 135(1), art. no. 11005. DOI: 10.1115/1.4007088
I. Naveros, M.J. Jiménez, M.R. Heras. 2012. “Analysis of capabilities and limitations of the regression method based in
averages, applied to the estimation of the U value of building component tested in Mediterranean weather”.
Energy and Buildings. 55, pp. 854-872. DOI: 10.1016/j.enbuild.2014.06.049
Enríquez, R.; Jiménez, M.J.; Heras, M.R. 2012. “Analysis of a solar office building at the South of Spain through
simulation model calibration”. Energy Procedia. 30, pp. 580 - 589. DOI: 10.1016/j.egypro.2012.11.068
E. Giancola, C. Sanjuan, E. Blanco, M.R. Heras. 2012. “Experimental assessment and modelling of the performance of
an open joint ventilated façade during actual operating conditions in Mediterranean climate”. Energy and
Buildings. 54, pp. 363-375. DOI: 10.1016/j.enbuild.2012.07.035
R. Enríquez, L. Zarzalejo, M.J. Jiménez, M.R. Heras. 2012. “Ground reflectance estimation by means of horizontal and
vertical radiation measurements”. Solar Energy. 86(11), pp. 3216-3226. DOI: 10.1016/j.solener.2012.07.020
Sanjuan C., Soutullo S., Heras M.R. 2012. “Energy performance evaluation of an evaporative wind tower”. Solar
Energy, 86(5), pp. 1396–1410. DOI: 10.1016/j.solener.2012.02.001
C. Sanjuan, M.N. Sánchez, M.R. Heras, E. Blanco. 2011. “Experimental analysis of natural convection in open joint
ventilated Facades With 2D PIV”. Building and Environment 46, pp. 2314-2325. DOI:
10.1016/j.buildenv.2011.05.014
C. Sanjuan, M.J. Suárez, M. González, J. Pistono, E. Blanco. 2011. “Energy performance of an open-joint ventilated
façade compared with a conventional sealed cavity façade”. Solar Energy. 85(9), pp. 1851-1863. DOI:
10.1016/j.solener.2011.04.028
S. Soutullo, M.N. Sanchez, R. Olmedo, M.R. Heras. 2011. “Theoretical model to estimate the thermal performance of
an evaporative wind tower placed in an open space”. Renewable Energy 36, pp. 3023-3030. DOI:
10.1016/j.renene.2011.03.035
S. Soutullo, R. Olmedo, M.N. Sanchez, M.R. Heras. 2011. “Thermal conditioning for urban outdoor spaces through the
use of evaporative wind towers”. Building and Environment, 46(12). pp. 2520-2528. DOI:
10.1016/j.buildenv.2011.06.003
Soutullo S., San Juan C., Heras M.R. 2011. Comparative study of internal storage and external storage absorption
cooling systems. Renewable Energy, 36(5), pp. 1645-1651. 2011. DOI: 10.1016/j.renene.2010.11.017
Sanjuan C., Soutullo S., Heras M.R. 2010. Optimization of a solar cooling system with interior energy storage. Solar
Energy, 84(7), pp. 1244-1254. DOI: 10.1016/j.solener.2010.04.001
J. Arce, M.J. Jiménez, J.D. Guzmán, M.R. Heras, G. Alvarez, J. Xaman. 2009. "Experimental study for natural
ventilation on a solar Chimney”. Renewable Energy. 34(12), pp. 2928-2934. DOI:
10.1016/j.renene.2009.04.026
Friling N., Jiménez M.J., Bloem J.J., Madsen H., 2009. “Modelling the heat dynamics of building integrated and
ventilated photovoltaic modules”. Energy and Buildings. 41(10), pp. 1051-1057. DOI:
10.1016/j.enbuild.2009.05.018
M.J. Jiménez, B. Porcar, M.R. Heras. 2009. “Application of different dynamic analysis approaches to estimate the U
value of building components”. Building and Environment. 44(2), pp. 361-367. DOI:
10.1016/j.buildenv.2008.03.010
M.J. Jiménez, B. Porcar, M.R. Heras. 2008. “Estimation of UA and gA values of building components from outdoor
tests in warm and moderate weather conditions”. Solar Energy. 82(7), pp. 573-587. DOI:
10.1016/j.solener.2008.02.013
Jiménez M.J., Madsen H., Bloem H., Dammann B. 2008. “Estimation of Non-linear Continuous Time Models for the
Heat Exchange Dynamics of Building Integrated Photovoltaic modules”. Energy and Buildings. 40(2), pp. 157167. DOI: 10.1016/j.enbuild.2007.02.026
Jiménez M.J., Madsen H., Andersen K. K. 2008. “Identification of the Main Thermal Characteristics of Building
Components using MATLAB”. Número especial sobre ensayos de cerramientos en condiciones reales.
Building and Environment. 43(2), pp. 170-180. DOI: 10.1016/j.buildenv.2006.10.030
Jiménez M.J., Madsen H. 2008. “Models for Describing the Thermal Characteristics of Building Components”. Número
especial sobre ensayos de cerramientos en condiciones reales. Building and Environment. 43(2), pp. 152-162.
DOI: 10.1016/j.buildenv.2006.10.029
J. Matí-Herrero y M.R. Heras-Celemín. 2007. “Dynamic physical model for a solar chimney”. Solar Energy. 81(5), pp.
614-622. DOI: 10.1016/j.solener.2006.09.003
Jiménez M.J.; Heras M.R. 2005. “Application of multi-output ARX models to estimate the U and g values of building
components from outdoors testing”. Solar Energy. 79(3), pp. 302-310. DOI: 10.1016/j.solener.2004.10.008
Heras M.R., Jiménez M.J., San Isidro M.J., Zarzalejo L.F., Pérez M. 2005. “Energetic Analysis of a Passive Solar
Design, Incorporated in a Courtyard after Refurbishment, Using an Innovative Cover Component Based in a
Sawtooth Roof Concept”. Solar Energy, 78(1), pp. 85-96. DOI: 10.1016/j.solener.2004.05.019
Alvarez G., Arce J., Lira L., Heras M.R. 2004. “Thermal performance of an air solar collector with an absorber plate
made of recyclable aluminum cans”. Solar Energy, 77(1), pp. 107-113. DOI: 10.1016/j.solener.2004.02.007
Download