J2 - LMT POS
(WIRE INSERTION SIDE)
SCALE: 2:1
PIN 4 - WIRE 14 (BLK)
PIN 2 - WIRE 13 (BRN)
PIN 3 - WIRE 12 (VIO)
PIN 1 - WIRE 11 (RED)
WIRE NO.
J23 - SLT MOT
WIRE COLOR
J1 - MOT/ENC
1
2
3
4
5
6
7
8
9
10
11
12
13
14
J23 - 3
J23 - 1
J23 - 4
J23 - 2
J23 - 7
J23 - 10
J23 - 14
J23 - 13
J23 - 8
J23 - 6
J23 - 11
J23 - 12
J23 - 5
J23 - 9
ORANGE
WHITE
GREEN
SLATE
BLACK
RED
BLUE
YELLOW
BLACK
BROWN
RED
VIOLET
BROWN
BLACK
J1 - 1
J1 - 2
J1 - 3
J1 - 4
J1 - 5
J1 - 6
J1 - 7
J1 - 8
J1 - 9
J1 - 10
J2 - LMT POS
J23 - MOT/ENC
(WIRE INSERTION SIDE)
SCALE: 2:1
J2 - 1
J2 - 3
J2 - 2
J2 - 4
PIN 13 - WIRE 8 (YEL)
PIN 11 - WIRE 11 (RED)
PIN 9 - WIRE 14 (BLK)
PIN 7 - WIRE 5 (BLK)
PIN 14 - WIRE 7 (BLU)
PIN 12 - WIRE 12 (VIO)
PIN 10 - WIRE 6 (RED)
PIN 8 - WIRE 9 (BLK)
PIN 5 - WIRE 13 (BRN)
PIN 6 - WIRE 10 (BRN)
PIN 3 - WIRE 1 (ORG)
PIN 4 - WIRE 3 (GRN)
PIN 1 - WIRE 2 (WHT)
PIN 2 - WIRE 4 (SLT)
SEE NOTE 3
SEE NOTE 3
SEE NOTE 3
VACUUM
J2 - LMT POS
(SEE NOTE 8)
4
SEE NOTE 3
ATMOSPHERE
+29
0
+1.14
38.00
- .00
965.2
(SEE NOTE 6)
1
8
5
LABEL CABLE HERE
(SEE NOTE 9)
J23 - SLT MOT
(SEE NOTE 8)
2
7
J1 - MOT/ENC
(SEE NOTE 8)
3
8
+8
0
+.3
2X 2.0
- .0
51
+8
0
+.3
1.0
- .0
25
+8
51
0
+.3
2.0
- .0
6*
+8
0
+.3
2X 1.0
- .0
* 0.5 [13] MINIMUM
OVERLAP OF ITEM 5
25
J1 - MOT/ENC
(WIRE INSERTION SIDE)
SCALE: 2:1
PIN 5 - WIRE 5 (BLK)
PIN 10 - WIRE 10 (BRN)
PIN 9 - WIRE 9 (BLK)
PIN 4 - WIRE 4 (SLT)
PIN 8 - WIRE 8 (YEL)
PIN 3 - WIRE 3 (GRN)
PIN 7 - WIRE 7 (BLU)
NOTES:
1. HYPOT 630 VDC 500 MEGOHMS MINIMUM 0.01 SECOND MINIMUM WIRE TO WIRE WITH MATING CONNECTORS.
2. ALL CIRCUITS MUST HAVE CONTINUITY, NO OPEN CIRCUITS.
3. WIRES 1 & 2, TWISTED PAIR, 1 TURN PER INCH: FROM ITEM 1 TO ITEM 3 (J1 - MOT/ENC) AND ITEM 2 (J23 - SLT MOT)
WIRES 3 & 4, TWISTED PAIR, 1 TURN PER INCH: FROM ITEM 1 TO ITEM 3 (J1 - MOT/ENC) AND ITEM 2 (J23 - SLT MOT)
4. ALL TESTS ARE PERFORMED AT ROOM TEMPERATURE, ALL PARTS MUST PASS ALL TESTS.
5. CERTIFICATE OF COMPLIANCE IS REQUIRED UNLESS CABLE IS PRODUCED UNDER THE RECOGNITION OF UL/CSA AND SO MARKED.
6. REFERENCE PAVE DRAWING# 4846 FOR COMPLETE FEEDTHRU ASSEMBLY (ITEM 1) DETAILS.
7. FINISHED PART SHALL BE CLEAN, DRY, (NO OIL OR OTHER RESIDUES). EXCEPTION: VACUUM GREASE ALLOWED ON O-RINGS OF ITEM 1.
8. LABEL WITH REFERENCE DESIGNATOR AND DESCRIPTION (EG. J1-MOT/ENC, J2-LMT POS, J23-SLT MOT) WHERE SHOWN USING ITEM 9.
9. LABEL CABLE PER BCI DOCUMENT A18080 WHERE SHOWN USING ITEM 9. REF-INFORMATION ON LABEL INCLUDES: BCI PART NUMBER ,
BCI REVISION, MANUFACTURING DATE CODE, PAVE TECHNOLOGY CO., AND 67744 (PAVE CAGE CODE).
10. WORKMANSHIP SHALL BE PER BCI DOCUMENT A18080.
11. PART SHALL MEET THE PRODUCT ENVIRONMENTAL COMPLIANCE (PEC) REQUIREMENTS OF BCI DOCUMENT A80946.
12. CONNECTOR PINOUT VIEWS ARE FROM THE INSERTION SIDE OF THE CONNECTOR.
13. DIMENSIONS ARE INCHES [millimeters].
FINISH
ALL DIMENSIONS AND TOLERANCES APPLY TO FINISHED PART IN MILLIMETERS.
ALLOWABLE TOLERANCES UNLESS SPECIFIED OTHERWISE: NONE 12.700,
X.X DECIMAL 2.540, X.XX DECIMAL 0.508, X.XXX DECIMAL 0.127,
ANGLES 1 DEGREE SURFACE FINISH 128 microinch RMS
PIN 6 - WIRE 6 (RED)
SEE NOTE 3
SEE NOTE 3
PIN 2 - WIRE 2 (WHT)
SEE NOTE 3
PIN 1 - WIRE 1 (ONG)
SEE NOTE 3
9
4
S100X150YAJ
LABEL SELF-LAMINATING WHITE POLYESTER 1" WIDE BY 1.5" LONG PANDUIT OR EQUAL
8
14
43031-0001 OR -0007
CONTACT PIN MICRO-FIT 3.0 TIN PLATED PHOSPHOR BRONZE 20-24AWG CRIMP
7
14
56134-9100 OR -9000
CONTACT SOC MICROCLASP TIN PLATED COPPER 22-28AWG CRIMP
PAVE will meet the assembly and test specifications of
BECKMAN# B83884 as documented on this assembly
drawing. Any changes must be approved by PAVE.
2751 Thunderhawk Court
Dayton, OH 45414-3445
U.S.A.
tel (937) 890-1100
fax (937) 8905165
www.pavetechnologyco.com
6
A/R FIT-221B-3/8
TUBING SHRINK 2:1 XLPO .375"ID X .025"WALL BLACK
5
A/R PTN0.25
SLEEVING BRAIDED FLEXO PET .25"ID BLACK
SP16-E-150-14-MPPE24-2T-38T
NOTED
DESCRIPTION
PAVE-Seal® Cable Harnesses
MATERIAL
4
1
43020-0400
CONNECTOR PLUG MOLEX MICRO-FIT 3.0 DUAL ROW 4 POS W/PANEL MOUNT EARS
3
1
43020-1001
CONNECTOR PLUG MOLEX MICRO-FIT 3.0 DUAL ROW 10 POS
2
1
51353-1400
CONNECTOR RCPT HSG MOLEX MICROCLASP DUAL ROW 14 POS
1
1
4846
SP16-E-150-14-MPPE24-3-40
ITEM QTY PART NUMBER
DESCRIPTION
PART NUMBER
4811
REVISION
LEVEL
PROJECTION
-